A04 is an excellent yeast strain for any hop forward beer. Wonderfully suited for juicy, hazy New England IPAs
Barbarian produces stone fruit esters that work great when paired with citrus hops
Double pitch size with a minimum of 200 billion cells—twice the size of the standard yeast pitch
Imperial Yeast is a group of hard-working, fermentation fanatics who provide the brewing industry with the highest quality, most effective yeast possible
A04 Barbarian will attack your IPAs with esters of stone fruit when paired with citrus hops. Who doesn’t love that combo in their beer... tasty! For an exceptionally balanced IPA we highly recommend A04 Barbarian.
Attenuation: 73-74%
Flocculation: Medium
Alcohol Tolerance: 10% ABV
Optimum Fermentation Temp: 62-70°F
Cell Count: 200 Billion
Please Note: For best results we Always recommend ordering an Ice Pack with your liquid yeast. Ice Packs can be found below in the "You might Also Need" section.
Please Note: When choosing an ice pack option beware that the liquid yeast will not arrive cold even when shipped together. Ice packs and insulated mailing options are designed to keep the yeast colder for longer during shipment, but they will not ensure that your yeast arrives cold. We will not replace liquid yeast that arrives warm. During warmer months we strongly recommend you choose dry yeast.
162 - 226 °L - Simpsons Malt - A brown malt with flavors of, you guessed it, Coffee! This malt will contribute to a smooth mouthfeel, and will add rich flavorful coffee notes to your favorite stouts, porters, or browns.
1007 is a true top cropping yeast with low ester formation and a broad temperature range
Fermentation at higher temperatures may produce mild fruitiness. Yeast remains in suspension post fermentation
Activator Smack-Pack System™ "proofs" the yeast and shortens lag time when it hits your wort
When smacked, the Activator™ packet releases sugars and nutrients to initiate the culture's metabolism
Wyeast has been a pioneer in craft brewing for over 35 years and is committed to creating the finest fermentation products available
Although beneficial, cultures do not need to be activated prior to inoculation
A true top cropping yeast with low ester formation and a broad temperature range. Fermentation at higher temperatures may produce mild fruitiness. This powdery strain results in yeast that remains in suspension post fermentation. Beers mature rapidly, even when cold fermentation is used. Low or no detectable diacetyl.
Attenuation: 73-77%
Flocculation: Low
Alcohol Tolerance: 11%
Optimum Fermentation Temp: 55-68°F
Cell Count: 100 Billion
Styles:
American Wheat or Rye Beer
Berliner Weisse
Bière de Garde
Düsseldorf Altbier
Kölsch
Northern German Altbier
For best results we always recommend ordering an ice pack with your liquid yeast.
Please Note: When choosing an ice pack option beware that the liquid yeast will not arrive cold even when shipped together. Ice packs and insulated mailing options are designed to keep the yeast colder for longer during shipment, but they will not ensure that your yeast arrives cold. We will not replace liquid yeast that arrives warm. During warmer months we strongly recommend you choose dry yeast.
300 - 375 °L - Weyermann® - Carafa® Special malts are de-husked prior to the roasting process, which leads to full flavored grain without the harsh bitterness and astringency typically associated with dark color grains. Up to 5% of grist.
3.5-4.2 °L - BestMalz - BestMalz Vienna malt provides full maltiness and some color, often with a nutty flavor. Used in European amber, golden and brown lagers, as well as Marzen and Oktoberfest beers. Can be used 100% of the grist.
Malt Specification:
Moisture % - max. 5
Extract fine % dm - min. 76
Color °L - 3.5 - 4.2
Protein % dm - max. 12
The first time a brewer tries out the FastRack bottle drying rack system they always say the same thing to themselves: “That is a thing of beauty!”
The FastRack bottle drying rack is the easiest way to drain, stack, and store your empties! When bottling, use the FastRack to hold your bottles after sanitizing, and have them ready to fill with your delicious homebrew! The FastRack takes up far less space than a bottle tree. This is a very sturdy system, and even when stacked over 4 levels tall, maintains stability! Works for standard bottles as well as swing tops.
We sell the Fast Rack components independently, or in a handy combo pack of 1 Tray and 2 Racks.
2 FastRack Racks will hold 48 x 12 oz bottles, a full 5 gallon batch!
Compatible with 12oz bottles only.
Lowest Price Guarantee, this item has MAP pricing so you can be confident you won't find it for less.
Smooth, ribless design prevents yeast and bacteria buildup, making sanitation a breeze Punted bottom and conical top promote sediment collection and reduce oxidation during storage Extra-wide 4" mouth opening simplifies filling, additions, and cleaning Constructed from heavy-duty, virgin PET plastic without plasticizers Made with food-grade and BPA-free materials The Fermonster is a brand new fermenter designed specifically for fermentation. MoreBeer! gave product feedback for over 2 years of development and we think they nailed the design. The large lid allows for easy filling and makes hop or oak additions a breeze. The smooth sides are fantastic for sanitization - no ribs or texture to collect yeast or bacteria. The punted bottom allows sediment to collect to the sides so that you can siphon liquid from the center. Because they are made from virgin PET plastic, they're nearly unbreakable and a lot safer than similar glass carboys. Also notice the conical top which reduces surface area if you plan to store beer or wine long term. These ported versions come with our plastic spigot (FE347), allowing for easy racking and sampling! Made from heavy PET plastic, the same material used in 2 L soda bottles, which is nearly impermeable to oxygen penetration. Due to the thickness of the material and the overall geometry, the Fermonster does not require ribs or dimples for stability. That results in a super smooth interior surface that reduces yeast and sediment buildup making it the easiest to clean, most sanitary PET carboy on the market. The huge 4" opening makes filling a breeze, and cleanup is as easy as wiping down the inside. These fermentors are completely air-tight and the lids sealed tight with an O-Ring. Additional O-Rings and Lids both with and without holes are available for purchase, see our You Might Also Need items below. Features: 4" inner diameter wide mouth carboy - easy to clean! Food grade PET plastic construction is nearly impermeable to oxygen penetration No hard to clean dimples or ribs Punted bottom O-Ring and Lid with one hole is included (Fits #10 Stopper) Additional O-Rings and Lids available Weight: 1.5 lbs Temperature Limit: 140° F Height: 14.6 inches Diameter: 9 inches Completely taste and odor free Perfect for Beer, Wine, Cider, Mead, Kombucha or any other fermented beverage! Thick walls for better oxygen barrier. Please note: the pictured #10 Stopper (FE470VS) and three piece airlock (FE370) are not included.
Belgian or Sparkling style glass beer bottles
High pressure rating to withstand highly carbonated sours, Belgian-style beers, or sparkling wine
At 16.9 ounces, this is the perfect bottle size to pour a full pint glass
Three cases of 12 bottles are enough to package a 4.75 gallons of finished beer
26mm crown cap finish
These high quality 500 ml (16.9 oz) Belgian / Champagne style bottles can be capped with standard crown caps (26mm). Thicker than standard 12 and 22 oz bottles. Ideal for lambics and other styles that have higher volumes of CO2. 3 Cases will take 4.75 gallons of beer, roughly the amount needed for a 5 gallon batch.
Bottle Specifications:
Capacity: 500 ml
Weight: 0.88 lb
Height: 10.12 inches
Outside Diameter: 2.87 inches
Pressure Rating: Up to 4 volumes of carbonation.
Shipping Details:
Case: 12 Bottles
Pallet Layer: 16 Cases
Full Pallet: 64 Cases
Weight: 11.75 pounds per case
Case dimensions: 12"L x 9-3/8"W x 10-5/8"H
Keep your KegLand pH Meter's probe in great condition by storing it in this storage solution. Letting your probe dry is the leading cause of degradation. By leaving your pH meter in this solution when not in use, you will extend the life of your probe and maintain more accurate readings.
KegLand Part Number: KL04183
Now a scale that you can use to measure large amounts of hops and grains at home! This is a great addition to any home brewery!
This Electronic Grain Scale is capable of weighing a full sack of grain, and then some. This benchtop unit has a 55lb capacity, lifetime warranty, and a host of helpful features.
Features:
Massive 55 lb (25 kg) capacity!
Optional Backlight Feature
Runs on 4 x C batteries or AC adaptor (included)
Large Weigh Platform 8" x 6.5"
Weighs in Pounds, Pounds:Ounces, Ounces, Kilograms, Grams
Dual Range Weigh Design:
0-2 lbs x 0.1oz/0-1kg x 2g
2-55 lbs x 0.5oz/1kg-25kg x 10g
Display is removable and attached to two foot cord for easy viewing of the display while using larger weighing vessels
Oxebar Mono is a lightweight 1-gallon keg with high oxygen barrier properties compared to standard PET plastic Add the Ball Lock Adapter Tapping Head to easily pressurize and dispense at home or on the go Lighter than traditional glass growlers. Easier and safer to transport Made from Nylon impregnated PET for superior oxygen barrier Wedge seals on the optional Tapping Head and Ball Lock Caps eliminate points of oxygen ingress found where rubber is traditionally used Lower total oxygen pickup compared to a standard corny keg lid seal This 1-gallon keg is lightweight, compact and has high oxygen barrier properties with 3x better (meaning less) gas transmission than traditional PET grades of plastic making it suitable for beer storage or other oxygen sensitive carbonated and non-carbonated beverages. This product is sold with the PCO38 cap, however if you would like to dispense this product through a draft system, we recommend the use of the Ball Lock Adapter Tapping Head. The tapping head is sold separately and allows you to attach standard ball lock disconnects and pressure relief valve to the top of the keg. What is Oxebar Mono Oxebar Mono is a PET polymer blend that utilizes several polymers blended together to significantly improve gas barrier properties. When compared with standard PET plastic, Oxebar Mono is able to reduce oxygen ingress and CO2 loss so your precious beverage is preserved and shelf life extended by 3x. We recommend this product for beer storage of up to 6 months. Dimensions: Diameter: 6.1" (155 mm) Height: 12.7" (325 mm) Pressure Rating: 58 psi (4 BAR) Temperature Rating: 113°F (45°C) KegLand Part Number: KL2487 NOTE: Oxebar kegs are marked with a manufacturer’s “expiry date”. This does not indicate that the keg is bad after this date; it simply indicates that a hydro test may be in order. 2 years after production and every 2 years after first use, it is recommended that the keg be hydro tested to ensure the tank is holding pressure. Hydro test instructions are available here. You will also need the KG520 Tapping Head and D1072 Green PRV to perform the test. If you do not plan to pressurize the keg, the test is not necessary.
This Erlenmyer flask is huge, coming in at 5000 ml (5L!), making it the ideal vessel to make a large yeast starter for a 10+ gallon batch. The best brewers make large yeast starters to get their beer fermenting fast, and most of them do so in an Erlenmeyer flask. Large populations of active yeast help ensure flavorful beer free of off flavors. Because this flask is made from borosilicate glass you can move it from a boil into a cold water bath for cooling. This means you can do the whole process in one container, keeping it simple and helping to reduce the risk of contamination when transferring from one container to another. Double Boiler Method It is important for your safety to heat water in the flask with a heat source that distributes heat evenly. Morebeer! recommends using the "double boiler method." This process involves using a boiling water bath on the outside of the flask to heat up the water inside the flask. All you need is a kettle 3 gallons or larger. This process is much safer and efficient. If the flask should break or boil over, your kettle will be there to collect the contents, thus keeping your stove clean and keeping you safe. Safety First: Please take us up on a great deal - save $14.95 when you purchase a 5000ml flask and our BE300 5 gallon stainless steel kettle at the same time. Use Promo code SAFETY1 at checkout. Features Massive 5L (5000ML) Capacity Made from Borosilicate Glass (also known as Pyrex) Fantastic price for a flask of this size Produced for MoreBeer! Why make a yeast starter? (from our FAQ) We build starters for 3 main reasons. First, to ensure yeast health. By making a starter 1-3 days in advance, you ensure that your yeast is healthy and strong and ready to do its job. Second, to create more yeast. By making the starter you will increase the cell count of the yeast, giving you a better chance of keeping bacteria's and wild yeasts from fermenting your wort. Third, if you are making high gravity beers. If you are making a high gravity beer (1.060+) you will need more yeast to start the ferment faster. High gravity beers will also finish more completely when you pitch ample quantities of yeast. In the lab world, these flasks are known as "Student Grade". Student grade flasks may have small scratches and air bubbles. A great flask for making yeast starters! For a stopper we recommend a size #8-9 (FE498 or FE49). Kegland Part Number: KL04008
4.6 - 8.0 ° L - BestMalz - Increases beer color, mouth feel and malt character. Used in dark, aromatic and full-bodied lagers such as Märzens, Oktoberfests, Bocks and Double Bocks. Can be used 100% of the grist. In some classic beer styles such as continental lagers, the use of Munich malt is usually essential if the brewer is to achieve the required malt character and mouthfeel.
Malt Specification:
Moisture % - max. 5
Extract fine % dm - min. 80.5
Color °L - 4.6 - 8.0
Protein % dm - max. 12
Improve the quality of your yeast starters with this compact magnetic stir plate. Aeration is an important factor in making a yeast starter, and without the stir plate you'll need to pick up and swirl your starter by hand as often as possible. Drop the included stir bar into your Erlenmeyer flask, set it on the stir plate, and let it do the work for you!
Features:
On/Off switch
Adjustable speed control dial
Accommodates flasks up to 5000ml in size
Stir bar included
4 ft. long cord
Plate measures 4.75" in diameter
Dimensions: 7" L x 6" W x 4.25" H
Kegland Part Number: KL07061
S-189 is a great strain for brewing elegant lagers with floral notes
Originating from the Hürlimann brewery in Switzerland, this lager yeast's profile produces fairly neutral flavor beers with high drinkability
Fermentis active dry yeast offers reliability, ease-of-use, and consistency to home and professional beverage makers across the world
Fermentis Saflager S-189 is an ideal lager strain for many lager and pilsner beers. It can ferment well within the temperature range of 54-64° F, but is ideally fermented between the tighter range of 54-59° F. Highly flocculant, this yeast falls out of suspension easy resulting in brilliantly clear beer. A great choice as a very tolerant strain that makes great lagers.
This yeast can be pitched directly, but if you prefer to rehydrate, the instructions are below.
Sprinkle the yeast in a minimum of 10 times its weight of sterile water or wort (we suggest 4 oz) at 70°F to 77°F (21 to 25 °C). Do not stir. Leave to rest 15 to 30 minutes. Gently stir for 30 minutes, and pitch the resultant cream into the fermentation vessel.
Attenuation: 80-84%
Sedimentation Time: Fast
Alcohol Tolerance: 9-11% ABV
Optimum Fermentation Temp: 54-64°F
Feels like professional lab equipment and worth every penny Made by leading brand in beer analysis but at a home user price. Get Fast and Accurate gravity readings at any point in the brewing process even when alcohol is present Connects and displays via free app on your phone or tablet Based on oscillating u-tube principle which is known as world's most accurate testing method Anton Paar is a leading producer of analytical testing equipment for commercial breweries. Borrowing some technology from their high end machines, the EasyDens digital gravity/alcohol tester is designed for savvy homebrewers and small commercial breweries. It is a precision gravity/density testing unit which can accurately read gravity with a tiny 2 ml sample at any point in the brewing process. Alcohol % can also be tracked at any point during fermentation. The unit hooks up to your smartphone via Bluetooth and stores various fermentation "profiles" enabling you to track fermentation progress, alcohol levels, and help know when it's time to keg & drink your beer! Protect your device with the Silicone Protection Cover! See the documents tab for frequently asked questions about the Easy Dens. Features: Take a highly accurate gravity reading at any point in the brewing process even when alcohol is present. Very fast and simple to use Only uses 2ml of sample Automatic Temperature Compensation Connects and displays via free app on your phone or tablet Based on oscillating u-tube principle which is known as world's most accurate testing method Extremely durable Measures in specific gravity and alcohol can be determined with original reading App features graphing for gravity and alcohol App stores batch records (10) and can email a batch record as a .csv for saving. Mobile Apps: Free mobile apps for each application Brew Meister Proof Meister Wine Meister Features Quick measurement Fermentation tracking & visualization Continuous tracking ABV & Attenuation calculation based on OG & FG Automatic Temperature Compensation Stores batch records (unlimited amount included in premium) Data export Latest Updates to Meister Apps New batch design with a more detailed user interface Integrated beer style database Recipe creation and management Custom measurement values and labels ABV measurement for light beer, hard seltzer, and cider with the EasyDens & SmartRef Combo (in addition to existing support for standard and strong beer, wine, liqueur, and kombucha) Fermentation tracking for wine with SmartRef (previously only possible with EasyDens) Calorie determination for measurements with EasyDens, SmartRef, and the EasyDens & SmartRef Combo in Brew Meister and Wine Meister Tilt Hydrometer and RAPT Pill support in Brew Meister and Wine Meister Operating System Android & iOS Compatible with Apple Watch Features Free: Basic features and all measurement units Premium features: Free for one year New App Features: Direct ABV determination with the EasyDens & SmartRef Combo Beer: alcohol content (±0.5 %v/v), real extract (±0.2 %w/w), original gravity (±0.8 %w/w) and total extract (±2.0 g/L) Wine: alcohol content (±0.5 %v/v for wines up to 15% and ±1.0 %v/v for wines from 15 to 20 %v/v) Kombucha: alcohol content (±0.5 %v/v) Application specific in-app calculators Beer: color calculator, refractometer brix correction, ABV (OG/FG) calculator, converter for gravity, temperature & more Wine & Fruits: brix acid correction, residual sugar calculator, converter for gravity, temperature & more Coffee: extraction and TDS calculator Spirits: converter for gravity, temperature & more Compatible with RAPT Pill & Tilt Hydrometer Measurement data from these devices can be seamlessly integrated into your Brew Meister and Wine Meister batches Specifications: Measuring range Plato: -10 °P to +40 °P Brix: -10 °Bx to +80 °Bx Baumé: 0 °Bé to 45 °Bé Oechsle: -50 °Oe to +400 °Oe Klosterneuburger Mostwaage: 0 °KMW to 30 °KMW Babo: 0 °Babo to 30 °Babo Sugar concentration: 0 g/L to 500 g/L Alcohol: 0 %v/v to 100 %v/v Proof: 0 °Proof to 200 °Proof Specific Gravity: 0.7 to 1.2 Temperature: 5 °C to 30 °C / 41 °F to 86 °F Accuracy
Plato: 0.3 °P Brix: 0.3 °Bx Baume: 0.3 °Bé Oechsle: 2 °Oe Klosterneuburger Mostwaage: 0.3 °KMW Babo: 0.3 °Babo Sugar concentration: 3 g/L Alcohol: 0.5 %v/v Proof: 1 °Proof Temperature: 0.2 °C / 0.4 °F Specific Gravity: 0.005* Digital resolution
Plato: 0.1 °P Brix: 0.1 °Bx Baume: 0.1 °Bé Oechsle: 1 °Oe Klosterneuburger Mostwaage: 0.1 °KMW Babo: 0.1 °Babo Sugar concentration: 1 g/L Alcohol: 0.1 %v/v Proof: 1 °Proof Temperature: 0.1 °C (0.01 °F) Density: 0.001 g/cm³ General
Sample volume approx. 2 mL Ambient temperature 5 °C to 35 °C / 41 °F to 95 °F Storage temperature 5 °C to 35 °C / 41 °F to 95 °F Humidity 5 % to 90 % relative air humidity, non-condensing Interface Bluetooth Low Energy Power supply Two 1.5 V LR6 AA alkaline batteries or two AA NiMH rechargeable batteries Battery operation lifetime: >40 hours Dimensions 101 mm x 58 mm x 44 mm (4 in x 2.3 in x 1.7 in) Weight (incl. batteries) approx. 190 g (0.42 lbs) Mobile Operating System Android 5.0 and higher; iOS 13.0 and higher Scope of supply EasyDens portable density meter, syringe 10 mL, batteries, adapters Luer, adapter Luer lock, waste hose, illustrated application description, certificate of compliance, safety guide Ingress protection IP65 according to IEC 60529 *accuracy for aqueous solutions (such as beer, wine, distilled spirits): 0.001
This BrewMaster Series kit was scaled down to a homebrew batch size in collaboration with the brewmasters at Barebottle Brewing Company This light and refreshing lager has a Mexican pilsner framework with a German Helles twist Includes Crystal and Saaz hops Estimated ABV: 4.7% Estimated IBUs: 18 Makes 5 gallons of finished beer The most compelling stories always have a twist. Barebottle's award-winning Torcido is a Mexican pilsner with a German Helles twist. Combining these styles results in a light and refreshing lager that would make even M. Night Shyamalan do a double take. Originally developed by Barebottle brewer John "Magic" Montes De Oca, Torcido Torcido took gold in the International Pilsener category of the 2019 Great American Beer Fest and in turn became the inaugural inductee into the Viking Malt Hall of Fame. Brewed with Viking Pilsner, flaked corn, a dash of Carahell®, and hopped with two additions of Crystal and Saaz. Barebottle Brewing Company was born in San Francisco, CA with the idea that craft brewing shouldn't adhere to the strict guidelines of established beer styles. Founded by a trio of friends and former classmates, they continue to pay homage to their homebrewing roots by printing a scaled down version of their recipe on every label. If you ever see one of their creations out in the wild, we highly recommend that you buy it, drink it, and then brew it! Makes 5 gallons Estimated Original Gravity: 1.039-44 SRM (Color Range): 3-4 IBUs: 18 Estimated Alcohol Percentage: 4.7% Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts.
Easily take your beer anywhere while keeping it protected from UV! Each case contains 300 cans and lids which is enough for about 25 gallons of beer Compatible with the Cannular Can Seamer when used with 330ml table spacer (CAN103) BPA free liner Aluminum cans offer 100% protection from UV and other wavelengths of light that are harmful to beer. There's still great debate surrounding whether cans or bottles are better at keeping beer fresh, but if done correctly, cans are theoretically the superior option. When a crown cap is crimped onto a bottle, the lining of the cap can form an imperfect seal on the bottle, allowing small amounts of oxygen in, as well as small amounts of CO2 out. Over time this can result in oxidation of the beer and lost carbonation. Seamed cans form a much better seal, which can prevent these issues Aside from better protection, aluminum cans are undoubtedly the safest option for sharing and enjoying your homebrew. Bring your canned creations tailgating, camping, boating, or crack a few open poolside without the worry of broken glass! To use these cans with the Cannular Can Seamer you will also need the CAN103 table spacer. 330ml/11.1 oz aluminum cans Each case contains 300 cans and lids 202 end diameter beverage cans with B64 lids One case is enough for roughly five 5-gallon batches of beer Compatible with the Cannular Can Seamer when used with 330ml table spacer (CAN103) BPA free liner Please note that empty aluminum cans are very delicate, and up to 5% of the cans are likely to be dented or damaged in transit. If the cans were packed in a more protective (more expensive) cardboard box, the cost per can would be more expensive than simply having some dented/sacrificial cans arrive. Kegland Part number: KL13093
The humble plastic ball lock disconnect has been around a long time and is used by countless homebrewers around the world. Despite the extensive use they have seen little to no innovation for decades and KegLand wanted to change this. Enter the Duotight Ball Lock QD. The integrated Duotight design means you can connect your beer and gas line directly, easily and reliably with no need for additional fittings or clamps. It is a robust and super compact design that is incredibly easy to assemble and disassemble, making cleaning and sanitizing an absolute breeze! Made from highly chemical resistant materials with stainless springs and ball bearings (no cheap ABS plastics here) this baby is extremely resistant to commonly used chemicals such as phosphoric based sanitizers and caustics. The incredibly small form factor allows for easy stacking of kegs. The new cap design ensures a pressure seal with just hand tightening and it can be completely taken apart for cleaning with no tools required. Duotight Ball Lock QDs are offered in three sizes that correspond to the outer diameters seen on our line of EVABarrier Draft Tubing. 6.35 mm OD – features a very tight 3 mm ID that requires only 3.2 ft of length for adequate flow resistance. This is the ideal size for mobile draft or if you want to keep your kegerator as tidy as possible. 8 mm OD – the most common OD size of EVABarrier tubing. This size comes in two IDs (4 mm & 5 mm) and pairs up with the lion's share of Duotight fittings and accessories. 4 mm ID is our most recommended size for beverage lines, requiring 5-6 ft. lengths. 5 mm ID is commonly used as gas line or when 10-12 ft. beverage lines are required. 9.5 mm OD – suitable for gas lines or long draw beverage lines. At 6.3 mm ID, this size is ideal for beverage lines that will be 20 ft. or longer in length. Duotight Push-to-Connect These Duotight ball lock disconnects already have the Duotight fitting built into the ball lock disconnect. No need for additional threaded fittings. Simply push the beer/gas line in and you are done! Compact The world's most compact ball lock disconnect ever manufactured. This new compact form factor is great for tight spaces or fridges where you want to pack as many kegs in as possible. This is one of the only ball lock disconnects that allows standard ball lock kegs to be double stacked while still connected to beer and gas lines. Overmolded Poppet The overmolded poppet design means you can couple and disconnect this ball lock QD under extreme pressures of up to 150 psi (higher than most kegs working pressure) and will never have issues with the o-ring blowing out. Tool-less Disassembly Other ball lock disconnects require a tool such as a flat head screw driver or spanner to take them apart for cleaning. The new caps on these allow for easy disassembly by hand, making these easier to break down for cleaning. It's literally never been easier to remove hop particles from your ball lock disconnects. Extreme Chemical Resistance No cheap ABS plastic or nitrile seals. This ball lock disconnect is made from stainless spring and ball bearings, with an engineering polyketone resin body, EPDM and PP/EPDM overmolded poppet. This makes the quick disconnect resistant to extreme chemicals such as phosphoric and acetic acid, caustic soda, peroxide and many other acid or base chemicals which are commonly used in homebrewing. Toughness This ball lock disconnect is more robust than any other plastic ball lock disconnect ever manufactured due to the use of new engineering plastics. Don't be fooled by the small form factor — these bad boys are tough! High Flow The internal design of these allows for faster flow meaning you can slightly quicker transfers when compared to other plastic ball lock disconnects. Features: Ball Lock Quick Disconnect - Gas In Direct connect EVABarrier tubing Compact design won't interfere with keg stacking Made from highly chemical resistant materials Disassemble by hand for quick and easy cleaning Three sizes available: 6.35 mm (KL24242) 8 mm (KL20756) 9.5 mm (KL20770)
VOSS is a kveik yeast strain that ferments quickly at higher temperatures with superb flocculation A traditional farmhouse yeast from Voss, Norway that produces a clean flavor profile with hints of orange peel & citrus Designed to be sprinkled directly onto the surface of your wort with no pre-oxygenation before pitching required Ferment between 68-104°F CellarScience offers high-quality yeast that is easy to use, consistent, and available at a tremendous value Traditional farmhouse yeast from Voss, Norway. This kveik yeast strain ferments quickly at higher temperatures with superb flocculation. Produces a clean flavor profile with hints of orange peel & citrus. Every batch is PCR tested to ensure quality. Dosage: One sachet is enough to treat a 5–6 gallon batch. When calculating for larger batches, use at a rate of 2–3 grams per gallon of wort. We recommend rounding up by one full sachet rather than measuring out the yeast exactly. Direct Pitch or Rehydrate: VOSS yeast is designed to be sprinkled directly onto the surface of your wort with no oxygenation required in the initial fermentation. Our aerobic growth process makes this possible by creating dry yeast with high viability and high sterol levels. VOSS yeast is pre-loaded with essential nutrients to ensure a successful, complete fermentation. While not required, some brewers prefer to rehydrate yeast. To hydrate yeast, first, sanitize the yeast brick and scissors. Use 10 grams of sterilized tap water between 85-95°F (29-35°C) mixed with 0.25 grams of FermStart per gram of yeast. Sprinkle yeast on the water. Allow the slurry to stand undisturbed for 20 minutes, then swirl. Use small amounts of wort to adjust to within 10°F (6°C) of wort temperature before pitching. Ferment between 68-104°F (20-40°C). Optimum Fermentation Temp: 68-104°F Flocculation: Medium-High Alochol Tolerance: 16% ABV (LalBrew® Voss 12%) Attenuation: 75-80% Similar Strains: WLP520, OYL061 Gluten-free CellarScience Yeast: For years liquid yeast has been sold as the higher quality option but times are changing. Yes, 20 years ago dry yeast was made by bread yeast producers and the quality was not as good as liquid yeast. CellarScience is helping to flip that script with a full lineup of high-quality dry yeasts. Cell count and viability is usually higher than commercial liquid yeast pitches, which vary from pouch to pouch and don't ship well. CellarScience yeast can be pitched directly in most batches of wort, offering significant time savings. Yeast that is quick and easy to use, high quality, and available at a reasonable cost adds up to a tremendous value. Quality yeast that doesn't "break the brink". CellarScience Nutrients: For high gravity ferments consider rehydrating yeast with CellarScience FermStart yeast hydration nutrient. For high gravity or low nutrient wort, feed your fermentation with CellarScience FermFed DAP Free complex yeast nutrient mix.
6.1 - 8 °L - Weyermann® - Weyermann® Dark Wheat is a gently kilned malt made from high-quality German wheat. It contributes a mild golden color to wort and a robust malty-sweet flavor with notes of bread, biscuit, toffee, and caramel. Wheat malts are high in protein, which helps produce fuller-bodied beers. Wheat malt can also improve head formation and retention, depending upon the other grist constituents. In top-fermented beers, Weyermann® Dark Wheat malt performs especially well, adding creaminess, body, and complex wheat flavors. Weyermann® Dark Wheat malt has a somewhat 'drier', more complex character than pale wheat malts. It's the signature malt for Bavarian Dunkelweizen, and perfect for Weizenbocks, Kölsch, and Altbiers. (6.2-8.1 L)
Due to high demand, the 2.2. is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory.
A heat soluble, commercial quallity extra no. 1 grade, powered Gelaitin. This is much higher quality Gelatin than you will find in most beer/winemaking shops. It is composed of high molecular weight mass proteins that carry a big positive charge. Prepare by mixing in warm water and then adding during a transfer or pump-over. The solution must be maintained at 95-104F (35-40C) when used. See below for different dosage rates for beer and wine.
For Beer
Use 1/2 tsp for five gallons of beer. Dissolve gelatin into 1/4-1/2 cup of hot water to dissolve and add to beer. Wait a few days and rack off.
A rough approximate of weight is 1 tsp = 1.2 grams. We highly recommend using a scale to weigh the product for an accurate dose. We do not recommend relying on these rough conversions for accurate dosage rates.
Used primarily in sanitizing solutions to lower pH, therefore making the SO2 solution more effective. Use 1 tbsp per gallon along with 1 tbsp meta per gallon. Citric is not added directly to must prior to either primary or ml fermentation as its metabolism can lead to volatile acidity.
A rough approximate of weight is 1 tsp = 4 grams. We highly recommend using a scale to weigh the product for an accurate dose. We do not recommend relying on these rough conversions for accurate dosage rates.
Domestically produced in the USA.
If you're looking for a high-quality draft tubing to take your system into the 21st century, EVABarrier is the clear choice. This double walled tubing offers superior protection against oxidation, CO2 loss and microbial growth. Plus, it's BPA and PVC free! EVA tubing is the future of draft line for professional applications, and now you can rig up your home system with the same first-class tubing.
The 4 mm (5/32") ID size is perfect for homebrew draft applications where only a short beer line is needed. We recommend using 5-6 ft. per line for adequate flow resistance.
Outer Barrier
The outer barrier is made from EVA material and provides a decent stiffness to the tubing while still remaining pliable. This not only makes EVABarrier extremely kink resistant, it also makes it the best tubing to be used with Duotight, John Guest, and other push-in fittings.
Inner Barrier
The inner barrier is made from a proprietary polymer that acts as an excellent gas barrier. You can rest assured that your beer will be better protected from oxygen exposure, as well as CO2 loss. Your beer will stay fresher for longer and not loose carbonation like with other draft line. With other beverage line, you may notice that beer sitting in the line for an extended period will start to taste flat and/or oxidized. EVA Barrier tubing is unquestionably better in this regard and you will notice a significantly improved freshness of your beer, especially if it's been sitting in the lines for a while.
Due to the high density and smooth nature of the EVABarrier inner wall, the internal surface of the tubing is remarkably smooth and almost completely impermeable. This makes it difficult for bacteria and other microbes to attach to the inside surface of the tubing. Just another way EVABarrier is looking out for you and your beer!
Direct Connect to Ball Lock Kegs
This tubing works seamlessly with Duotight Gas In and Bev Out Ball Lock QDs which allow you to connect your draft lines directly to your ball lock homebrew keg. Be sure to select the correct size QD fittings that correspond to your tubing's outer diameter (OD).
Specifications:
Inner Diameter - 4 mm (5/32")
Outer Diameter - 8 mm (5/16")
PVC, BPA , and Plasticizer Free*
Stiff outer wall is kink resistant and easy to use with Duotight fittings
Smooth inner wall prevents oxidation, CO2 loss and microbial growth build-up
*EVABarrier does not contain plasticizers, or phthalates, that are used to make PVC flexible. These plasticizers are known to leach out into the beer over time and have adverse health effects.
Kegland Part number: KL06224
3944 is a versatile witbier yeast strain can be used in a variety of Belgian style ales
Produces a complex flavor profile dominated by spicy phenolics with low to moderate ester production
Activator Smack-Pack System™ "proofs" the yeast and shortens lag time when it hits your wort
When smacked, the Activator™ packet releases sugars and nutrients to initiate the culture's metabolism
Wyeast has been a pioneer in craft brewing for over 35 years and is committed to creating the finest fermentation products available
Although beneficial, cultures do not need to be activated prior to inoculation
This versatile witbier yeast strain can be used in a variety of Belgian style ales. This strain produces a complex flavor profile dominated by spicy phenolics with low to moderate ester production. It is a great strain choice when you want a delicate clove profile not to be overshadowed by esters. It will ferment fairly dry with a slightly tart finish that compliments the use of oats, malted and unmalted wheat. This strain is a true top cropping yeast requiring full fermenter headspace of 33%.
Attenuation: 72-76%
Flocculation: Medium
Alcohol Tolerance: 11-12%
Optimum Fermentation Temp: 62-75°F
Cell Count: 100 Billion
Styles:
Belgian Dubbel
Belgian Tripel
Spice, Herb, or Vegetable Beer Witbier
For best results we always recommend ordering an ice pack with your liquid yeast.
Please Note: When choosing an ice pack option beware that the liquid yeast will not arrive cold even when shipped together. Ice packs and insulated mailing options are designed to keep the yeast colder for longer during shipment, but they will not ensure that your yeast arrives cold. We will not replace liquid yeast that arrives warm. During warmer months we strongly recommend you choose dry yeast.
Vanilla beans are a great way for the adventurous homebrewer to impart a different and unique flavor to their beers.
These Bourbon Vanilla Beans from Madagascar are fresh, (unlike the dry beans you typically see in grocery stores) and ready to be used in whatever beer you like.
To use, simply slice the bean open lengthwise and add to your Secondary or Keg. Remove when the Vanilla flavor is at the desired strength. 1-2 beans are fine for a slight Vanilla flavor, but some brewers will push the limits and add the third bean. Are you a three-bean-brewer? (This would typically be done in an Oatmeal Stout or a similarly heavy beer.)
Enhanced Yeast Performance: FermStart provides a concentrated blend of micronutrients, including amino acids, sterols, and vitamins, which helps yeast transition quickly from dormant to active, ensuring a healthy and robust fermentation process.
Faster Fermentation Start: By supplying readily assimilable nutrients, FermStart allows yeast to skip energy-consuming steps, promoting faster yeast cell multiplication and out-competing wild yeast, ensuring your selected yeast dominates the fermentation.
Strong Cell Membrane Support: Sterols in FermStart help yeast cells maintain membrane elasticity, enhancing their ability to survive and perform well under tough fermentation conditions, ensuring consistent fermentation results.
Antioxidant Protection: The inclusion of glutathione, a powerful antioxidant, helps protect yeast cells from oxidative damage during rehydration, improving yeast health and promoting a more stable and efficient fermentation process.
If you’re rehydrating beer yeast, it’s quick and easy to ensure a perfect ferment by adding FermStart by CellarScience®. FermStart is a concentrated micronutrient blend that helps yeast during the critical phase in which they transition from dried and dormant back into healthy and active. FermStart is added to your rehydration water so that your yeast absorbs the nutrients as they absorb the water. When gravities exceed 15° Plato or 1.060 starting gravity, it is recommended to rehydrate your yeast. To ensure a perfect ferment that reaches its full flavor potential, rehydrate your yeast with FermStart.
How Much?
FermStart is a super concentrated formula, which is very convenient when you are rehydrating large amounts of yeast. Use 1 gram of Fermstart for every 4 grams of yeast. We offer some suggested ranges for the amount of water to use below.
Examples:
12g yeast - Add 3g FermStart to roughly 50ml of water
500g yeast - Add 125g FermStart to roughly 1500 ml of water
The Science of How it Works
FermStart is rich in readily assimilable amino acids, sterols, vitamins, and natural glutathione. Readily assimilable means that the size of the molecules present in FermStart are extremely small and easily absorbed by the yeast cell. This is obtained by centrifuge and allows FermStart to be extremely concentrated and not contain filler.
The availability of readily assimilable amino acids allows the yeast cell to skip the step in which amino acids would be synthesized within the cell. This saved energy is instead directed into multiplication. Faster yeast cell multiplication means a faster start allowing your yeast to out-compete wild yeast. Wild yeast have unknown flavors and fermentation behavior so it is important to give the yeast you selected the best chance to dominate the fermentation.
Sterols help the cell membrane regain and maintain elasticity helping to ensure a perfect start and continued performance throughout the fermentation. The strong cell membrane helps ensure that the yeast can survive and complete alcoholic fermentation under tough conditions.
Glutathione is a very special natural antioxidant and detoxifier made up of three amino acids cysteine, glutamate, and glycine. It is extremely important for maintaining intracellular health by preventing damage to cellular components during the very oxidative process of rehydration.
Bursting with hop character with a smooth and creamy mouthfeel. Our best-selling Hazy IPA year after year
Includes Warrior®, Citra®, and Mosaic® hops
Estimated ABV: 6.4%
Estimated IBUs: 28
Makes 5 gallons of finished beer
Haze Craze is our take on the hazy New England IPA recipe. Also known as a North Eastern IPA, or Juicy IPA, it quickly became one of the most popular beer styles in the US. It packs all of the hop character that craft beer nerds love, and it's much softer and less bitter than classic West Coast IPAs, making it a much more approachable style for the uninitiated. The style accentuates hop character while maintaining a smooth and creamy mouthfeel. Light in color but hazy due to heavy dry hopping, yeast selection, as well as additions of oat and wheat. Low in bitterness with a huge hop character due to hop-bursting, this beer will satiate even the biggest hop head.
NEIPA has become popular nationwide thanks to breweries like Tree House Brewing, The Alchemist, Hill Farmstead and Grimm Artisanal Ales. One taste of this delicious style will make a staple in your brew schedule.
Makes 5 gallons
Estimated Original Gravity: 1.062-66
SRM (Color Range): 4.5
IBUs: 28
Estimated Alcohol Percentage: 6.4%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All included steeping grains will come milled.
Liquid Malt Extract (LME) vs. Dried Malt Extract (DME)
MoreBeer! recipe kits are offered in both Liquid Malt Extract and Dry Malt Extract so that our customers can choose the format that best suits their needs and brewing style. LME is a viscous liquid, similar in consistency to maple syrup. In addition to being the more affordable option, many brewers find LME easier to handle than dry extract. DME is more condensed and comes in a powder format that is similar to baking flour. Although it’s a little more costly, DME is naturally lighter in color and stays fresher for longer. We highly recommend DME when brewing light colored beers.
Smooth and creamy mouthfeel with an outstanding citrus flavor and aroma
Includes Mittelfruh hops
Estimated ABV: 5.4%
Estimated IBUs: 9
Makes 5 gallons of finished beer
There's a stunning celestial body on the rise, and it's dead set on blasting your taste buds with an onslaught of refreshing flavor. Drawing inspiration from two prominent wheat ales—Blue Moon and Shock Top—this clone recipe is sure to transport you to a cosmos of crisp citrusy goodness and subtle coriander spice. Always light and refreshing, Lunar Shock aims to orbit your brew schedule year-round.
An American take on the Belgian Witbier style. The wheat and oats provide a smooth and creamy mouthfeel, while sweet orange peel and coriander contribute outstanding citrus flavor and aroma.
Makes 5 gallons
Estimated Original Gravity: 1.052-55
SRM (Color Range): 5
IBUs: 9
Estimated Alcohol Percentage: 5.4%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All included steeping grains will come milled.
Liquid Malt Extract (LME) vs. Dried Malt Extract (DME)
MoreBeer! recipe kits are offered in both Liquid Malt Extract and Dry Malt Extract so that our customers can choose the format that best suits their needs and brewing style. LME is a viscous liquid, similar in consistency to maple syrup. In addition to being the more affordable option, many brewers find LME easier to handle than dry extract. DME is more condensed and comes in a powder format that is similar to baking flour. Although it’s a little more costly, DME is naturally lighter in color and stays fresher for longer. We highly recommend DME when brewing light colored beers.
Munich is rich, malty, and amber-colored—perfect for dark lagers like Marzen, Bock, and Doppelbock
Made from 50% Munich and 50% Pilsner Malt
Add in small amounts to add depth to your malt character for any style
Can be used as 100% of your fermentable sugar in extract brewing
Add for color correction, boost gravity, or improve head retention in all grain brewing
Use our rich, malty, amber colored Munich Malt Extract to make delicious, true to style, German lagers such as Marzens, Bocks, and Doppelbocks. But don't limit its use to just these beers - try it out in any recipe where a rich, malty flavor sounds good! Made with 50% Munich and 50% Pilsner malt in a multi-step mashing process. You can count on this extract to deliver malt flavor but still have a high degree of fermentability.
When shopping for Munich Extract consider buying it from a supplier like MoreBeer! that packages and moves lots of volume. We also package our own malt extract in multi-layer oxygen barrier bags that keeps our extract incredibly fresh. And when it comes to brewing Malt Extract brews the freshness of your extract is key.
We recommend customers to store their extract in the refrigerator if they do not plan on using it within 8 weeks.
The DigiBoil is a versatile electric kettle that can be used as a standalone unit or integrated into your current brew system to serve a variety of functions. Easily brew 5-gallon extract batches. Use it to preheat your strike water or sparge water to a precise temperature. Pair it with a pump and heat exchanger to use it for HERMS brewing. Or slap on a still top lid and condenser for distilling! With so many ways to use the DigiBoil, and an affordable price tag to boot, it's hard not to get excited about this electric kettle! The Gen 2 DigiBoil features an upgraded glass lid, allowing you to monitor your heated or boiling liquid. Interested in using the DigiBoil for all-grain brewing? With the Mash Upgrade Kit, you can easily convert the DigiBoil into an electric mash tun! This DigiBoil model has two built-in heating elements that run off a 110V plug. One element is 1000w and the other is 500w for a combined 1500 watts! The elements can be individually controlled, allowing you to use a single element to gently hold temperatures, or engage both elements to quickly go from steeping temp to boiling. Temperatures are set and automatically maintained through the digital control panel. Simply set your desired temperature and flip on the heating element(s). Integrated stainless ball valve comes with a 13mm barb (approx. 1/2"). The barb can be removed to attach 1/2" FPT fittings if desired. Features: 304 stainless steel construction 9 gallon total capacity Digital temperature control 110V / 15A power and plug (5 ft. cord) Dual heating element control (1000w and 500w) Heating elements are concealed for easy cleaning 304 stainless steel 1/2" ball valve with 13mm barb (approx. 1/2") Stamped-in volume markers (gallons & liters) Glass lid Temperature reads in °F or °C With elements turned off, hold both +/- buttons to switch between °F or °C Compatible with reflux and pot still (DS130& DS120)*
External Dimensions: 29" H x 15" W (including handles) Internal Dimensions: 19.5" H x 11.75" W ETL Listed *Distilling: to use the DigiBoil with a distilling condenser, you will need to purchase the still top lid and gasket (DS124). Warning: Distilling alcohol without permits or licensing is illegal in many countries, including the United States. It is the customer's responsibility to research their local, state, and federal laws and abide by those laws. Brewmaster is not responsible for any damage or injury caused by either misuse or unlawful use. Stills can also be used to produce essential oils, vinegar, purified water and engine fuel (requires permit in USA). KegLand Part Number: KL07245
This BrewMaster Series kit was scaled down to a homebrew batch size in collaboration with the brewmasters at Pizza Port Brewing Company
Great red color with a solid malt sweetness matched with a firm hop backbone
Includes Magnum, Centennial, and Cascade hops
Estimated ABV: 5.8%
Estimated IBUs: 55-60
Makes 5 gallons of finished beer
Shark Bite Red is the flagship beer of Pizza Port, and has been brewed more times than any of their standards. Great red color with a solid malt sweetness matched with a firm hop backbone, all for under 6% ABV. We recommend White Labs California Ale WLP001.
Makes 5 gallons
Estimated Original Gravity: 1.057-61
SRM (Color Range): 21
IBUs: 55-60
Estimated Alcohol Percentage: 5.8%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts.
A reliable workhorse for Hazy IPAs, West Coast IPAs, Pale Ales, and Hoppy Lagers
Aroma Profile: Berry, Citrus, Stone Fruit, Tropical
Alpha Acids: 11.5 – 13.5%
Whole cone hops are often preferred for dry hopping as they maintain contact while floating in the beer and are easier to remove
Adding whole cone hops directly to the mash tun is a great way to add flavor and help clarify wort
Mosaic® spiked in popularity immediately after its' release due its' incredibly pungent and unique character. With a genealogy that includes Simcoe as a mother, this hop has bursting citrus, pine, mango, and blueberry aroma. Great for bittering and aroma, this quickly became a favorite hop for single hop beers. Get your hands on this highly sought after hop while you can!
Whole cone hops are typically the preferred format for dry hopping as they maintain contact with the beer by floating, they are easier to remove than pellets and they add a unique character to the beer. Adding whole cone hops directly to the mash tun is also a great way to add some extra hop flavor and to clarify your wort as it filters through the flowers.
Hop Statistics:
Alpha Acids: 11.5 – 13.5%
Beta Acids: 3.2 – 3.9%
Alpha-Beta Ratio:2.95 – 4.22
Cohumulone: (% of alpha acids): 24 – 26%
Total Oils in mls per 100 grams dried: 1.0 – 1.5
Storage (% alpha acids remaining after 6 months storage at 68° F): 75%
Similar Hop Varieties: Simcoe®
Mosaic® is a registered trademark owned by Hop Breeding Company.
Simcoe® is a registered trademark owned by Yakima Chief Ranches.
Automatically release pressure inside your fermenter during pressure fermentations Regulate beer flow during pressurized transfers from fermenter to keg Built-in pressure gauge for easy reference when adjusting the spunding valve Pressure gauge is interchangeable—swap to different pressure ranges that better suit your application Diaphragm spunding valves offer higher accuracy compared to spring & poppet spunding valves Comes complete with Duotight ball lock QD and rigid joiner With this complete kit you'll be ready to use the BlowTie 2 Spunding Valve right out of the box. The BlowTie is used to release excess pressure on a pressurized fermenter or from a receiving keg during pressure transfers. This diaphragm spunding valve is much more accurate than the spring and poppet style, and works much better at lower pressures. This version of the Spunding Valve Kit includes the Duotight Ball Lock QD which allows you to attach the BlowTie directly to the QD via the 8 mm rigid joiner. The BlowTie 2 can also be upgraded with a Digital Mini Pressure Gauge. Pressure Fermentation Pressure fermentation is becoming more and more popular at the homebrew level, but in order to do it safely and accurately, you need a way to release excess pressure. You'll pressurize your vessel to your desired psi, but once fermentation begins and those hungry, active yeast start creating CO2, the pressure inside the vessel will increase. Attach a spunding valve and set it to your desired pressure, and it will blow off when the pressure gets to high and close up again when it's back to your desired psi. Pressure Transfers Even if you don't have a pressurizable fermenter, you may have done pressure transfers from keg to keg during filtering or after fining. During pressure transfers, it's a good idea to have a bit of head pressure in the receiving keg, especially if you're transferring beer that is already carbonated. Having a spunding valve in place will allow you to consistently control the head pressure and give you more consistent results, without losing carbonation in the process. Diaphragm vs. Poppet With the poppet style spunding valve, a spring pushes against a poppet to keep the valve closed. When the poppet lifts up to open, the surface area the gas pushes against becomes larger, and the spring has to work harder to push the poppet down and reseal the valve. This can lead to more gas being released than intended, and the remaining pressure in your vessel may be at a lower psi than your spunding valve’s set psi. Instead of a poppet, the spring inside the BlowTie pushes against a diaphragm, which has an immensely larger surface area. This means the surface area that the gas pushes against while the diaphragm is closed is significantly closer to the surface area it pushes against when the diaphragm is open. This leads to higher accuracy, and the remaining pressure after excess gas is released will be much closer to your set blow off pressure. Kit Includes: BlowTie 2 w/ Integrated Pressure Gauge (0-15 psi) 8 mm Duotight Gray Ball Lock Disconnect 8 mm OD Rigid Plastic Joiner
2.8 °L - Weyermann® - Beech wood smoked malt from Germany. Intended for use in Rauchbiers, it is also good in heavy Scotch Ales where the affect on flavor is a little more mild than the Peat Smoked malt. Flavor will come through nicely when steeped.
LalBrew Wit™ is a relatively neutral wheat beer strain that can be used to produce a wide variety of wheat beer styles
Produces lower levels of esters and phenols compared to traditional hefeweizen strains
Provides a baseline profile of banana and spice aromas, but leaves space for the brewer to showcase other spice additions
Lallemand premium brewing yeast offers brewers unmatched consistency, reliability and purity from one batch of beer to the next
A more neutral choice for wheat beer styles, LalBrew Wit dry yeast displays lower ester and phenol production than traditional hefeweizen strains such as Munich Classic. LalBrew Wit provides a baseline profile of banana and spice aromas, but leaves space for the brewer to showcase other spice additions typical of Belgian style beers. Traditional styles brewed with this yeast include but are not limited to Belgian Witbier, American Wheat, Berliner Weiss, Gose, Hefeweizen, Dunkelweis, and Weizenbock .
Beer Styles: Wheat beers
Aroma: Fruity, slight banana and clove
Attenutation: Medium to High
Fermentation Range: 63-72°F
Flocculation: Low
Alcohol Tolerance: 12% ABV
*See the technical data sheet below for information on rehydration, usage and storage.
1098 allows malt and hop character to dominate the profile
Ferments dry and crisp, producing well-balanced beers with a clean and neutral finish
Activator Smack-Pack System™ "proofs" the yeast and shortens lag time when it hits your wort
When smacked, the Activator™ packet releases sugars and nutrients to initiate the culture's metabolism
Wyeast has been a pioneer in craft brewing for over 35 years and is committed to creating the finest fermentation products available
Although beneficial, cultures do not need to be activated prior to inoculation
This yeast allows malt and hop character to dominate the profile. It ferments dry and crisp, slightly tart, fruity and well balanced. Beers will finish clean and neutral. Ferments well down to 64°F (18°C).
Attenuation: 73-75%
Flocculation: Medium
Alcohol Tolerance: 10%
Optimum Fermentation Temp: 64-72°F
Cell Count: 100 Billion
Styles:
Blonde Ale
English Barleywine
Northern English Brown Ale
Robust Porter
Scottish Export 80/-
Scottish Heavy 70/-
Scottish Light 60/-
For best results we always recommend ordering an ice pack with your liquid yeast.
Please Note: When choosing an ice pack option beware that the liquid yeast will not arrive cold even when shipped together. Ice packs and insulated mailing options are designed to keep the yeast colder for longer during shipment, but they will not ensure that your yeast arrives cold. We will not replace liquid yeast that arrives warm. During warmer months we strongly recommend you choose dry yeast.
Great for smaller kettles to do Brew in a Bag recipes or just for steeping grains. Made from nylon this bag comes with a drawstring and measures 15 in. x 15 in, with hole size in mesh of approximatley 0.4-0.8 mm is size.
The humble plastic ball lock disconnect has been around a long time and is used by countless homebrewers around the world. Despite the extensive use they have seen little to no innovation for decades and KegLand wanted to change this. Enter the Duotight Ball Lock QD. The integrated Duotight design means you can connect your beer and gas line directly, easily and reliably with no need for additional fittings or clamps. It is a robust and super compact design that is incredibly easy to assemble and disassemble, making cleaning and sanitizing an absolute breeze! Made from highly chemical resistant materials with stainless springs and ball bearings (no cheap ABS plastics here) this baby is extremely resistant to commonly used chemicals such as phosphoric based sanitizers and caustics. The incredibly small form factor allows for easy stacking of kegs. The new cap design ensures a pressure seal with just hand tightening and it can be completely taken apart for cleaning with no tools required. Duotight Ball Lock QDs are offered in three sizes that correspond to the outer diameters seen on our line of EVABarrier Draft Tubing. 6.35 mm OD – features a very tight 3 mm ID that requires only 3.2 ft of length for adequate flow resistance. This is the ideal size for mobile draft or if you want to keep your kegerator as tidy as possible. 8 mm OD – the most common OD size of EVABarrier tubing. This size comes in two IDs (4 mm & 5 mm) and pairs up with the lion's share of Duotight fittings and accessories. 4 mm ID is our most recommended size for beverage lines, requiring 5-6 ft. lengths. 5 mm ID is commonly used as gas line or when 10-12 ft. beverage lines are required. 9.5 mm OD – suitable for gas lines or long draw beverage lines. At 6.3 mm ID, this size is ideal for beverage lines that will be 20 ft. or longer in length. Duotight Push-to-Connect These Duotight ball lock disconnects already have the Duotight fitting built into the ball lock disconnect. No need for additional threaded fittings. Simply push the beer/gas line in and you are done! Compact The world's most compact ball lock disconnect ever manufactured. This new compact form factor is great for tight spaces or fridges where you want to pack as many kegs in as possible. This is one of the only ball lock disconnects that allows standard ball lock kegs to be double stacked while still connected to beer and gas lines. Overmolded Poppet The overmolded poppet design means you can couple and disconnect this ball lock QD under extreme pressures of up to 150 psi (higher than most kegs working pressure) and will never have issues with the o-ring blowing out. Tool-less Disassembly Other ball lock disconnects require a tool such as a flat head screw driver or spanner to take them apart for cleaning. The new caps on these allow for easy disassembly by hand, making these easier to break down for cleaning. It's literally never been easier to remove hop particles from your ball lock disconnects. Extreme Chemical Resistance No cheap ABS plastic or nitrile seals. This ball lock disconnect is made from stainless spring and ball bearings, with an engineering polyketone resin body, EPDM and PP/EPDM overmolded poppet. This makes the quick disconnect resistant to extreme chemicals such as phosphoric and acetic acid, caustic soda, peroxide and many other acid or base chemicals which are commonly used in homebrewing. Toughness This ball lock disconnect is more robust than any other plastic ball lock disconnect ever manufactured due to the use of new engineering plastics. Don't be fooled by the small form factor — these bad boys are tough! High Flow The internal design of these allows for faster flow meaning you can slightly quicker transfers when compared to other plastic ball lock disconnects. Features: Ball Lock Quick Disconnect - Bev Out Direct connect EVABarrier tubing Compact design won't interfere with keg stacking Made from highly chemical resistant materials Dissamble by hand for quick and easy cleaning Three sizes available: 6.35 mm (KL24235) 8 mm (KL20749) 9.5 mm (KL20763)
Comprehensive Yeast Nutrition: FermFed provides a complex blend of essential nutrients like diammonium phosphate (DAP), thiamin, amino acids, sterols, and vitamins (B2, B5, B6, B12), supporting yeast health and optimizing fermentation. Prevents Off-Flavors: FermFed’s nitrogen content helps prevent the production of undesirable compounds like hydrogen sulfide (rotten eggs), ensuring cleaner and more desirable flavors during fermentation. Enhanced Fermentation Performance: Ingredients such as sterols and mannoproteins promote yeast cell strength and improve the retention of aromatic compounds, helping yeast finish fermentation smoothly while enhancing flavor retention. Versatile Application: Ideal for wine and non-malt fermentations with known nitrogen deficiencies, FermFed is also available in a DAP-free version suitable for malt-based fermentations with unknown nitrogen levels. FermFed is a complex nutrient blend of diammonium phosphate, thiamin, amino acids, sterols, pantothenic acid, mannoproteins, protective microelements derived from yeast hulls, and vitamins B2, B5, B6, & B12. FermFed also contains the organic and inorganic nitrogen (DAP) that yeast need. Help your yeast reach the end of fermentation safely while producing amazing flavors with FermFed by CellarScience®. FermFed is a great choice for wine and other non-malt based fermenations where there is a known nitrogen deficiency. For beer or other fermentations where nitrogen levels are unknown we recommend FermFed DAP Free. The organic nitrogen supplied in FermFed DAP Free is sufficient for all malt fermentations and poses less potential issues if not consumed by the yeast. Read more about FermFed DAP Free. How Much Do I Add and When? For most beer fermentations add 1 gram per gallon. Mix the nutrient in a small slurry of water and add to the wort just prior to pitching yeast. How it Works The different components of FermFed work in different ways to feed and protect your yeast. When yeast do not have enough nitrogen, they are more likely to produce hydrogen sulfide (rotten eggs). FermFed helps to eliminate this problem by providing enough nitrogen for most situations. As yeast divide and multiply they get weaker and might not be able to properly finish fermentation as the alcohol content rises. Feeding them sterols help cells maintain membrane fluidity so that the yeast can properly function. Mannoprotein molecules bind esters and terpenes and work as an anchor to keep them in solution so they are not driven off by CO2 during fermentation. Pantothenic acid is added to help reduce the production of hydrogen sulfide. Thiamine is important for yeast metabolism. Vitamins B2, B5, B6, & B12 are important for general yeast health. For a full yeast nutritional plan, use FermStart when rehydrating yeast.
Add body and improve head retention without adding fermentable sugars
Commonly used in Stouts, but can be beneficial to any beer style where a bigger body is desired
Use as up to 20% of your grain bill
A great way to add body and head retention to your beer. Used especially for stouts, flaked barley can be used across practically all beer styles and is an essential adjunct to have around the brewhouse. Flaked Barley adds protein for body and head retention, without adding fermentable sugars to your wort the way you would with a wheat malt, which makes is great for tweaking the body/head characteristics of a recipe without changing the rest of the grain bill to accommodate a fermentable grain.
With this handy adapter, you can easily connect a gas ball lock fitting to your Tapcooler Counter Pressure Bottle Filler! The ball lock adapter inserts into the push fit CO2 connector on the filler unit so that a gray ball lock disconnect can be connected. This is highly recommended accessory for the Tapcooler filler to make bottling quick and easy.
The BrewZilla Polycarbonate Sight Glass comes assembled with stepless clamps and fits both the 35L and 65L units. This piece is installed in place of the stainless recirculation tube and allows you to check your fill level or watch your wort clarify during mash recirculation.
Intended for use with BrewZilla model 3.1.1 or earlier. Not compatible with the Gen 4 BrewZilla. Support brackets on older models may be too small for the 0.59" OD polycarbonate tube.
Includes:
Stainless 1/2" Male BSP threaded post with o-rings
Stainless 1/2" Female BSP threaded post with o-rings
360 mm long polycarbonate tube (13 mm ID x 15 mm OD)
Please note: you may need to use varying amounts of plumber's tape to get it to seal in the right position once it has been tightened back down on the female bottom end.
Warning: if using PBW, it is recommended to not have an extended contact time at temperatures above 120°F or exceeding the recommended dilution ratio.
KegLand Part Number: KL17114
BERLIN is a popular German yeast strain for producing lagers with soft malt character and balanced esters
An ideal choice for Bocks, Oktoberfests, and American amber lagers
Designed to be sprinkled directly onto the surface of your wort with no pre-oxygenation before pitching required
Ferment between 50-59°F
CellarScience offers high-quality yeast that is easy to use, consistent, and available at a tremendous value
A popular yeast strain with a Berlin lineage that is famous for producing amazing lagers with soft malt character and balanced esters. Like all CellarScience yeast, BERLIN is eligible for direct pitch straight into your wort. CellarScience provides 12g of yeast per sachet, which is up to 9% more than any other brand of dry yeast. Every batch of yeast is PCR tested to ensure quality. BERLIN has been selling to pro breweries for awhile but was just recently packaged down to sachets for homebrewers.
Dosage:
Two sachets are enough to treat a 5–6 gallon batch. When calculating for larger batches, use at a rate of 2.5–4 grams per gallon of wort. We recommend rounding up by one full sachet rather than measuring out the yeast exactly.
Direct Pitch or Rehydrate:
BERLIN yeast is designed to be sprinkled directly onto the surface of your wort with no oxygenation required in the initial fermentation. Our aerobic growth process makes this possible by creating dry yeast with high viability and high sterol levels. BERLIN yeast is pre-loaded with essential nutrients to ensure a successful, complete fermentation. While not required, some brewers prefer to rehydrate yeast. To hydrate yeast, first, sanitize the yeast brick and scissors. Use 10 grams of sterilized tap water between 85-95°F (29-35°C) mixed with 0.25 grams of FermStart per gram of yeast. Sprinkle yeast on the water. Allow the slurry to stand undisturbed for 20 minutes, then swirl. Use small amounts of wort to adjust to within 10°F (6°C) of wort temperature before pitching. Ferment between 50-59°F (10-15°C).
Optimum Fermentation Temp: 50-59°F
Flocculation: High
Alcohol Tolerance: 10-11% ABV
Attenuation: 75-85%
Similar Strains: WLP820, WY2206, S-23
Gluten-free
CellarScience Yeast:
For years liquid yeast has been sold as the higher quality option but times are changing. Yes, 20 years ago dry yeast was made by bread yeast producers and the quality was not as good as liquid yeast. CellarScience is helping to flip that script with a full lineup of high-quality dry yeasts. Cell count and viability is usually higher than commercial liquid yeast pitches, which vary from pouch to pouch and don't ship well. CellarScience yeast can be pitched directly in most batches of wort, offering significant time savings. Yeast that is quick and easy to use, high quality, and available at a reasonable cost adds up to a tremendous value. Quality yeast that doesn't "break the brink".
CellarScience Nutrients:
For high gravity ferments consider rehydrating yeast with CellarScience FermStart yeast hydration nutrient. For high gravity or low nutrient wort, feed your fermentation with CellarScience FermFed DAP Free complex yeast nutrient mix.
BE-134 is a go-to strain for Saisons and other dry, spicy Belgian-style beers
Produces highly refreshing beers that are fruity and floral with phenolic notes
Fermentis active dry yeast offers reliability, ease-of-use, and consistency to home and professional beverage makers across the world
A great choice for fermenting Belgian-style saisons, BE-134 gives off fruity aromas and spicy notes, such as cloves. This yeast is known to have particularly high attenuation, and produces very refreshing beers.
This yeast can be pitched directly, but if you prefer to rehydrate, the instructions are below.
Sprinkle the yeast in a minimum of 10 times its weight of sterile water or wort (we suggest 4 oz) at 70°F to 77°F (21 to 25 °C). Do not stir. Leave to rest 15 to 30 minutes. Gently stir for 30 minutes, and pitch the resultant cream into the fermentation vessel.
Attenuation: 89-93%
Sedimentation Time: Slow
Alcohol Tolerance: 9-11% ABV
Optimum Fermentation Temp: 64-78°F
*See the technical data sheet below for more information on rehydration, usage and storage.
The MonsterMesh is perfect for adding dry hops to your beer! Keep your dry hopping on a precise schedule by adding them to this mesh sleeve inside the Fermonster Plastic Carboy, then easily pull them out after the desired contact time. This mesh sleeve is custom made for the FerMonster Plastic Carboy. The plastic ring sits inside the neck of the fermenter, and the lid can be secured on top to make an airtight seal. The ring actually holds onto the neck of the FerMonster so there's no risk of the mesh sleeve falling into the carboy. Made from food grade materials, the #50 mesh will not affect the flavor of the beer or wine, and is temperature rated to 122°F. Designed for multiple uses, the MonsterMesh can be cleaned in the dishwasher and sanitized with the sanitizer of your choice. The MonsterMesh can be used alongside the MiniMesh to hold multiple additions. The MonsterMesh will sit on the neck of the carboy, and the MiniMesh can be inserted through the stopper hole in the lid. This way you can have two different infusions starting or stopping at different times.
Upgrade your home brewery with an innovative, Stainless Steel, 7 Gallon Brew Bucket™ Fermenter! You will enjoy many of the benefits of a stainless conical fermenter but at a fraction of the cost and you are going to love how easy it is to use! Made by Ss Brewing Technologies from polished 304 Stainless Steel, the Brew Bucket™ fermentor is not only functional it is downright beautiful. At MoreBeer! we know brewing equipment and we truly believe this is a piece of equipment you are going to enjoy using every brew day.
We inspected and used the Brew Bucket™ and one of the most unique features that stood out is that the Brew Bucket can be stacked during fermentation, even with an airlock attached. We also like the conical bottom that allows trub to settle out in a concentrated space that minimizes the surface area of the trub that is in contact with your beer. The included Patent Pending Rotating Racking Valve is also a brilliantly simple design allowing you to rotate the racking arm inside the Brew Bucket down during fermentation to minimize trub, and later up to get clear beer when racking! Etched Volume Markers on the inside were super handy when filling and display in both Liters and Gallons.
The build quality is really amazing for the price. Welds are clean. The lid is strong and the spring loaded lid hatches are solid. The lid includes a removable, molded silicone gasket that ensures an airtight seal. We love an airtight seal so that we can be sure to see the airlock working. The welded on stainless handles make the BrewBucket fermentor super easy to move.
Overall: Very functional, easy-to-use, will last a lifetime, and looks amazing. Lets make some beer!
Features:
Certified Food Grade 304 Stainless Steel Construction
Patent Pending Stainless Rotating Racking Valve
6.95 gal Max Capacity
40° Conical Bottom for Trub Trapping
Nests for Storage, Stacks for Ferment!
Molded Silicone Lid Gasket
Spring Loaded Lid Clamps for Airtight Lid Seal
Offset Airlock Hole includes Silicone Stopper
Gallon & Liter Markers inside for visual volume assessment
Stainless construction resists damage and is easy to clean
21” Height x 13” Width
10 lbs
Note: 1/2" Silicone fits into the lid hole for use as a blowoff. 3/8" ID tubing is perfect for racking beer from the BrewBucket's valve.
2206 is used by many German breweries to produce rich, full-bodied, malty beers
A good choice for bocks and doppelbocks. A thorough diacetyl rest is recommended after fermentation
Activator Smack-Pack System™ "proofs" the yeast and shortens lag time when it hits your wort
When smacked, the Activator™ packet releases sugars and nutrients to initiate the culture's metabolism
Wyeast has been a pioneer in craft brewing for over 35 years and is committed to creating the finest fermentation products available
Although beneficial, cultures do not need to be activated prior to inoculation
A classic German lager strain that provides a full body, rich-complex flavor and excellent mouthfeel. A perfect choice when a dry lager is not desired.
Used by many German breweries to produce rich, full-bodied, malty beers, this strain is a good choice for bocks and dopplebocks. A thorough diacetyl rest is recommended after fermentation is complete.
Attenuation: 73-77%
Flocculation: Medium High
Alcohol Tolerance: 9%
Optimum Fermentation Temp: 46-58°F
Cell Count: 100 Billion
Styles:
Classic Rauchbier
Doppelbock
Eisbock
Maibock/Helles Bock
Munich Dunkel
Oktoberfest/Märzen
Schwarzbier (Black Beer)
Traditional Bock
For best results we always recommend ordering an ice pack with your liquid yeast.
Please Note: When choosing an ice pack option beware that the liquid yeast will not arrive cold even when shipped together. Ice packs and insulated mailing options are designed to keep the yeast colder for longer during shipment, but they will not ensure that your yeast arrives cold. We will not replace liquid yeast that arrives warm. During warmer months we strongly recommend you choose dry yeast.
