Immersion

In a traditional wort chiller, the coils rest on the bottom of the pot and the hot wort on top takes a very long time to reach them, making the entire process time consuming and inefficient. Our original, simple innovation for the Immersion Wort Chiller from MoreBeer! is to move the coils right to the top where the majority of the heat is. This promises to give you the fastest heat exchange possible, to cool your wort down more efficiently and to get your brew into the fermenter as quickly and cleanly as possible. There is also no need to stir during chilling which reduces contamination and allows your trub and spent hops to settle to the bottom of your kettle. The connection feeds on our chillers our bent out down at an angle so that if there is any dripping at the copper/vinyl connection point it drips out of the kettle and not back into your beer. Also works perfect with a kettle that features a notched lid. Made in the USA in our metal shop.   Specs: 25' of 3/8" copper tubing 8' of vinyl tubing at both the inlet and the outlet Female garden hose adapter fitting for easy use with a garden hose spigot 10" diameter, 8" to the top coil, 15" to the bend to go over the lip of the kettle This chiller also comes in a water efficient version that uses less water.  

Read more less

Few materials are more durable or more attractive than stainless steel, which is exactly what sets this Stainless Steel Wort Chiller from MoreBeer! apart from similar chillers. This high quality stainless wort chiller includes 8 feet of vinyl tubing attached to both the in and out using a female garden hose fitting on the “in” side, as well as 25 feet of stainless steel tubing measuring 3/8 inch diameter. Although stainless steel takes a little longer to cool your worth than comparable copper tubing, its advantage is that it won’t tarnish between uses. Stainless steel is also much more affordable than copper, which makes this an economical choice that won’t sacrifice quality or real-world effectiveness. This stainless steel wort chiller also contains a brass hose adapter for an even more attractive, high quality look and feel. The Stainless Steel Wort Chiller 25’ x 3/8” from MoreBeer! is made entirely in the U.S.  Note: The inner bend on the coils have small indentations that are a natural result of the winding process used during manufacturing. As an upside, these do actually help turbulate the cooling water to eliminate laminar flow (helps increase the cooling capacity).   Product Specifications 25' Stainless tubing 8' Vinyl Tubing Brass Hose Adaptor 10" diameter 8" to the top coil 15" to the bend to go over the lip of the kettle.    

Read more less

25 Feet of 3/8" Copper Coils Raised Up To Where The Heat Is Integrated Turbulator Cools Faster and Uses 40% Less Water 25 Feet of 3/8" Copper Includes Tubing and Standard Garden House / Utility Sink Thread Manufactured in the USA Save water during the cooling process with our Super Efficient Immersion Wort Chiller. During the manufacturing process we build in an inner water turbulator that causes the cold water to spin through the coil. This reduces the laminar flow found in a standard wort chiller where only the outer water is cooled as it travels through the coil. The result is a 40% reduction in water, and faster cooling, when compared with our standard chillers.  But that is when we compare it to OUR standard chillers with the coils at the top. When you compare to other chillers on the market the results are even better. ALL of our chillers feature coils that raised up to where the heat is.  As we learned in school heat rises so when other wort chillers have all the coils on the bottom they actually never cool unless you stir your wort. The problem with stirring is that you mix up all your trub/sediment and you risk airborne contamination... neither of which is good. Our chillers cool fast and allow you to keep your lid on your kettle during the critical cooling period.  Constructed from 25' of 3/8'' copper tubing. 8' of vinyl tubing attached to both the in and the out with a female garden hose fitting on the in side. Use our CE21S hose thread adaptor to attach to your sink. Perfect for a kitchen environment where the sink is close by. This size chiller is ideal for our 8 Gallon Heavy Duty Kettles! The measurements are: Approx. 10" diameter, 8" to the top coil, 15" to the bend to go over the lip of the kettle.

Read more less

The Anvil stainless steel immersion chiller is ideal for cooling your wort FAST. The 3/8” x 28 ft long cooling coil offers a massive amount of surface area to chill your wort quickly to pitching temperatures. Also included is a 10 ft length of hose and all the fittings and clamps you’ll need to get up and running without trips to the hardware store. The included garden hose adapter fitting makes connecting to your water supply a breeze. Dimensions: Total height: 20 in Coil height: 12 in Coil width: 8.5 in    

Read more less

Say goodbye to chilling with buckets of ice water! This larger version of our MoreBeer! Immersion Chiller is perfect for cutting the chilling time down on your 10 gallon batches of beer. It is made of 50 feet of ½ inch copper tubing with brass fittings for garden hoses on either end for easy access to your water supply. It has a bend at the top to fit over the lip of a kettle, and fits well in a variety of kettle sizes. You can tell that this immersion chiller is truly built to last by looking at its weight and craftsmanship. It is heavy and sturdy with brass--not plastic--fittings. You will be able to rely on this quality, time-saving chiller for years to come.   Measurements: Approx. 10"" diameter, 13"" to the top coil, 24"" to the bend to go over the lip of the kettle.

Read more less