Spread recirculating wort evenly during mashing Transfer sparge water into your mash tun without disturbing the grain bed Aerate wort transferring from kettle to fermenter Designed to fit through the hole of the BrewZilla glass lid The KegLand Sergeant Sparge Head is a super simple device designed to help spread and distribute your wort in a mash tun. It can also be used as the final transfer piece between kettle and fermenter to assist in aerating your wort prior to pitching your yeast. It is also designed to fit through the BrewZilla's glass lid or distillation lid so you can recirculate evenly over your mash by adjusting the pumps flow rate. Specifications: 1/2" Thread 2" Long x 3/4" Wide Stainless Steel Barb w/ 1/2" Stainless Steel Retaining Nut KegLand Part Number: KL33640

Read more less

The Ss recirculation manifold is a nice gentle way to recirculate your wort. The manifold sits on top of the grain bed and evenly distributes the flow through 24 different holes on top of the manifold. Works great with our recirculation bulkhead fitting (BE386) and 1/2" FPT to 3/8" knurled hose barb (BE387). The manifold will fit in Ss Brewtech 10-30 gal kettles and mash tuns. It's 12.6" in diameter of 304 stainless steel with a 3/8" hose barb inlet.

Read more less

The Kettle Tube allows you to better filter trub and whole hops from your wort while transferring from your kettle to your fermenter. It is a rugged tube of stainless steel screen 12" in length, 1" in diameter, with a 1/2" MPT fitting at one end, and is our replacement for the discontinued Bazooka Screen. This fitting is intended for use with kettles that have 1/2" FPT threads on the inside of the kettle, or it can be used on the back of any of our line of Weldless Ball Valves. Excellent for straining out leaf hops in the boil kettle (Pellet hops can clog the screen). We also have several customers who use this as a screen in their Cooler Mash Tun! Kegland Part Number: KL03766

Read more less

MoreBeer!'s Patent Pending sparge arm design is the perfect addition to almost any all grain setup! This sparge arm assembly is made completely of stainless steel and silicone, and has two adjustment points. One of these will help to hold the sparge arm against your kettle, while the other allows you to move the sparge arm up or down inside the kettle to accommodate different amounts of grain. These adjustment knobs are very easy to hand tighten and loosen, meaning no tools are necessary. Excellent for sparging as well as recirculating your mash in a RIMS or HERMS system! To use, simply install on your kettle wall, tighten down the stopper bumper to hold the sparge arm in place, adjust the height of the bottom disc to be right above your grain bed but below the mash tun's water level, and adjust the flow level using the included ball valve. This unit will not include a barb or quick disconnect on the inlet of the ball valve, as every brewery is different. Please choose an inlet attachment from the sparge arms recommended items. Note - This sparge arm will not fit on most coolers. Make sure to check out the video in the video tab below.   Features 100% stainless and silicone construction Two adjustment knobs make it extremely universal Included ball valve allows you to increase or decrease the flow rate during sparge or recirculation Included check ball will prevent back flow Can adjust from the top of your kettle to 12-13 inches down into your kettle A single, large diameter outlet port trickles onto a stainless disc, which distributes sparge water gently and evenly. This port is also much easier to flush out and keep clean than many other sparge assemblies with multiple small holes that grain gets stuck in during recirculation Stainless tube measures 18.5" from the top to the bend, and 8.5" from the bottom to the center of the distribution disc. Can be mounted on a lip that is up to 7/8" wide Has a 1/2" FPT ball valve

Read more less

This false bottom fits great inside a 10 gallon mash tun, like our Rubbermaid coolers.   Due to it's domed shape, this particular false bottom can handle a heavy load of grain. It provides enough strength and space to allow your wort to run through without any channeling of the grain bed. It works flawlessly sparging even sticky mashes!   This false bottom can be used in converted Sanke kegs as well.   Made from stainless steel with 3/32” perforated holes on 5/32” centers. 3/8" barb for tubing connection.

Read more less

The Helix Coil makes for an excellent false bottom replacement, and installs easily on most cooler mash tuns and kettles. No matter how the coil rests, whether in a perfect circle or looped, the Helix works effectively as long as it isn't kinked. Measures 3.3 ft. in length and can be cut shorter if desired. Replace your bulky mash tun false bottom or install in your boil kettle as a trub filter. Made from 304 grade stainless steel. If your kettle has 1/2" FPT on the inside, you will need a 1/2" MPT nipple to attach the tee. Ideal for clean, simple, and efficient lautering Can be placed in all different shapes and loops as long as the spiral is not kinked Can be easily trimmed to a shorter length if desired Easy to clean, dishwasher safe Made from 304 grade stainless steel Stainless tee piece included Kegland Part Number KL10764

Read more less

If you're ready to step up to all grain brewing, this converted insulated cooler works wonders as a mash tun! The 14-gallon size can hold upwards of 25 lbs of grain, so there's plenty of room for even the strongest 5-gallon beer recipes and is perfect for most 10 gallon batches up to 1.070 SG. Comes pre-assembled with stainless steel perforated false bottom, high temperature silicone tubing, and 1/2" female threaded ball valve. Pair the valve with the male threaded fitting (plus a little plumber's tape) that best suits your setup and you'll off and running. The cooler also works perfectly as a Hot Liquor Tank. Use with the false bottom in place, or simply remove it and keep it on hand in case you decide to use the cooler as a Mash Tun down the road. Two of these coolers plus the Fermentap Sparge Arm Assembly work perfectly as a gravity fed all-grain setup. To connect the cooler's ball valve to the sparge arm assembly, we recommend a 1/2" MPT x 3/8" Barb fitting and 3/8" ID silicone tubing. Plumber's tape will ensure you have a leak-proof connection between the barb fitting and the ball valve. Includes: Insulated beverage cooler Max Volume: 14.7 Gal (56 L) Stainless dome-shaped perforated false bottom High temperature silicone tubing Stainless 1/2" BSP ball valve External Dimensions: Approx. 19" L x 19" W x 22" H KegLand Part Number: KL04671   Please note: the mash tun may come with a little extra silicone tubing than what's needed. Check that your false bottom is sitting flat and in the middle of the cooler and cut off excess tubing if needed.  

Read more less

Another high quality intuitive piece of brewing gear from Ss BrewTech, the Ssparge Arm!  Simple design, with adjustable height and flow rate, this is a necessary add on for the Ss InfuSsion Mash Tuns.  Incredibly easy to use: Simply choose and thread on a flow rate disk, clip the unit to your mash tun, set the height just above your grain bed, and get brewing!!  See the Documents tab above for a more detailed guide to use. For USE ONLY ON Ss MASH TUNS (10/20 gal) 304 Stainless Steel construction Designed for gravity feed from HLT Or hook your own pump / flow control valve 3/8” diameter stainless tubing 3/8" barb on inlet of tubing Custom silicone handle mount for Ss Mash Tun Easily adjust height of sparge head up  / down Uniform liquid dispersion fom sparge head

Read more less

PLEASE NOTE: The supplier of this product has temporarily halted shipments to addresses within the state of California. If you are a CA resident, please note your order will not be fulfilled and will ultimately be canceled. We hope to have this issue resolved with the supplier as soon as possible.   The Grainfather Sparge Water Heater is a temperature-controlled unit that allows you to heat up to 6.6 gallons (25 L) of water making the brewing process even easier by having the right amount of sparge water heated to the right temperature ready at the time of sparge. Start heating your sparge water when you begin the mash to ensure it is ready for when you need to sparge. Once water is at required temperature, it will hold that temperature until changed or turned off. Also comes with a sight glass, tap and heating lights.  Actual capacity from bottom to MAX level is 6.6 gal 25 liters (+/-0.5L). 110-120V~, 60Hz, 1500W (USA) Single wall 304 ss material, brushed finish One piece structure for easy cleaning 304 stainless steel lid with twisted lock for safety Cool touch and robust lid handle and urn handles Water gauge indication and stainless steel ball valve water tap Two overheat protection Concealed heating element Control lights: heating and keep warm ON/OFF switch Maintenance base With 45-110°C variable thermostat  

Read more less

The Vorlauf Arm Assembly is great for recirculating your mash. It fits right into the Ss Brewtech recirculation bulkhead fitting with a 1/2" knurled FPT locking nut.  Made from 304 stainless steel.  

Read more less

Secure silicone hose to your mash tun during recirculation Large circular center of the clamp leaves room for tubing without pinching Excellent chemical resistance to common brewing cleaners and sanitizers Able to withstand boiling temperatures This handy spring clamp features a heavy-duty muslin spring which ensures your silicone hose never accidentally pops out of your mash tun and spills your precious nectar over your brewery floor. The large circular space between the arms of the clamp is perfect for passing 1/2" silicone tubing through without pinching. Rounded handles for a comfortable grip and a PE end grip to ensure your hosing is kept secure. Made from Polypropylene and Polyethylene which have good chemical resistance so it will stand up to the task for use around common brewing cleaners and sanitizers. Temperature Rating: 32-248°F KegLand Part Number: KL24686

Read more less

Used along with the Ss recirculation bulkhead, this fitting adds a 3/8" hose barb on your mash tun. It attaches with a 1/2" FPT knurled locking nut and is required if you are using the Ss recirculation manifold. Made from 304 stainless steel and silicone O-rings included.

Read more less

A stable mash temp is one of the most important elements of the brewing process. The Ss Brewtech InfuSsion Mash Tun is the perfect choice for brewer’s looking to upgrade their aging plastic cooler. It’s built to last, made exclusively of 304 stainless steel and designed for those who want professional grade equipment and features for their home brewery. The double walled construction with injected high density foam insulation is incredible at mitigating temp loss and holding temperatures stable throughout the duration of a typical mash rest. The venerable InfuSsion Mash Tun has been updated with TC ports throughout for easy integration with the rest of the Ss Brewtech line up. Additionally, the InfuSsion Mash Tun is the first Ss product to be released with the Patent Pending Pure Flow Valve platform. Fully sanitary, easy to clean, and micro adjustable Pure Flow valves are designed as the ultimate brewing valve. Pro-Inspired Pro features like a 5° sloped floor with center drain, zero deadspace design, etched volume markings, integrated thermowell, thermometer, and the ability to incorporate mash recirculation result in the most thoroughly engineered and efficient mash tun available to homebrewers.  Upgradable The InfuSsion Mash Tun is now equipped with a 3/4" TC recirculation bulkhead which allows quick installation of optional accessories such as the vorlauf attachment or a recirculation manifold. Pure Flow Valve With a clean slate, the Ss Engineering Team took a stab at creating the perfect sanitary valve for brewing. The foundation of the Micro Adjust Valve is a removable silicone membrane that seamlessly integrates TC gasket geometry. This ingenious design provides a 100% sanitary environment where beer makes contact with nothing except pure silicone while inside the valve. Features: 304 Stainless steel construction 1” thick insulated side walls and lid Sanitary TC ports 5° sloped floor with center drain eliminates dead space Gasket sealed stainless steel false bottom 1.5" TC Pure Flow Valve 3/4" TC recirculation bulkhead Redesigned feet with locking screw  Redesigned LCD thermometer Etched volume markings gals/liters What's Included: InfuSsion Mash Tun LCD thermometer (°F/°C) Silicone thermometer boot (2) 1.5" TC clamps (2) 1.5" TC gaskets Pure Flow Valve 1.5" TC Thermowell Silicone plug for recirculation hole 3/4" TC recirculation bulkhead Perforated false bottom Silicone false bottom gasket   Lowest Price Guarantee, this item has MAP pricing so you can be confident you won't find it for less.

Read more less

The best way to make your own mash tun out of one of your Ss Brew Kettles. These false bottoms are domed and have a central suction point. Features: Made from 304 stainless steel Domed shape Central suction point Welded handle Silicone gasket Note: These false bottoms are designed for the Ss Brewtech Brew Kettles and will not fit other kettles. They are also not compatible with the Ss Brewtech BME Kettles.   Lowest Price Guarantee, this item has MAP pricing so you can be confident you won't find it for less.

Read more less

This domed false bottom works great with most 10 gallon insulated cooler mash tuns or kettles with a similar diameter. The dome shape design adds strength so it can handle a heavy load of grain. Comes with 13 mm (.51") barb which is perfect for 1/2" ID silicone tubing. Made from 304 stainless steel. 30 cm (11.8") diameter. KegLand Part Number: KL01250  

Read more less

Made from polycarbonate, these simple sight gauges are easy to install and clean. It comes with a 1/2 in BSP threaded post featuring a barb with o-rings and a 23.5 in polycarbonate tube that can be cut down to size. Note: The tube may require a hose clamp to keep it fixed to the barb. Kegland Part Number: KL03742

Read more less

The perfect size for small batches!   This false bottom fits great inside a 5 gallon beverage container, like our Rubbermaid coolers, or any container with at least a 9" opening at the top - such as a bucket. It can handle a heavy load of grain. It provides enough strength and space to allow your wort to run through without any channeling of the grain bed. It works flawlessly sparging even sticky mashes!   Made from stainless steel with 3/32” perforated holes on 5/32” centers. 3/8" barb for tubing connection.

Read more less

Compatible with the new T.C. model and the original InfuSsion Mash Tun. This kit is designed to include all the necessary components to use the recirculation bulkhead included with the InfuSsion Mash Tun for vorlauf and mash recirculation processes. To install the kit on a standard mashtun begin by installing the included 1/2" FPT x 1/2" Barb on the exterior of your mash tun's recirculation bulkhead.  Be sure to use PTFE tape for a liquid-tight seal. If using the supplied kit on a TC mashtun, begin installation with included 3/4" TC to 1/2" 90 Barb, 3/4" TC gasket and clamp. Next, locate the 3/8" knurled locknut, 3/8" silicone tubing, and recirculation manifold.  Trim the tubing to your desired length, and then use the hose clamps to secure the two ends of the tubing to the manifold and locknut.  As a best practice, begin the mash recirculation for the first 5-10 mins using the vorlauf attachment to clear any small grain particulate and to set the mash bed, then swap the vorlauf attachment for the recirculation manifold for the remainder of the mash rest.  Please keep in mind this kit is designed to use with a wort pump and an external heat source, such as a RIMS tube to maintain mash temps, which is not supplied. Includes: Recirculation Manifold Vorlauf Attachment 3/8" Barb to 1/2" FPT Knurled Locknut (2) 3/8" Stainless Hose Clamps 1 Foot of 3/8" ID Silicone Tubing 1/2" FPT to 1/2" Hose Barb or 3/4" TC barb with gasket and clamp 3/4" TC to 1/2" 90 Barb ( for use with TC Mashtun )  3/4" TC Clamp ( for use with TC Mashtun )  3/4" TC Gasket ( for use with TC Mashtun )     

Read more less

Convert the BrewBuilt T.C. brewing kettle into a mash tun using one of these false bottom kits. The heavy duty false bottom rests low in the kettle, utilizing a tri-clamp style maximizer that reduces dead space and pulls from the very bottom of your kettle, leaving no wort behind. A Silicone gasket rims the False Bottom, ensuring a tight seal to the wall with no chance of grain bypass. A handle is welded to the top of the false bottom for easy removal. To monitor your mash temperature, we recommend the 1.5" T.C. Thermometer with 6" probe for better grain bed penetration. 1.5" tri-clamp and gasket included Welded T.C. maximizer False bottom gasket for tight seal Welded legs and handle Made from 304 stainless steel NOTE: These false bottom kits will fit all BrewBuilt T.C. kettles, including the electric kettle with SlingBlade heating element. We do not recommend converting the electric kettle into a mash tun as the element will scorch the grain. If you wish to use the false bottom in your boil kettle, it should be noted that the screen is designed to filter grain, so fine particle vegetal matter will pass through.

Read more less

Anvil Brewing Equipment’s Kettle Strainer is just what you've been waiting for.  The durable stainless construction works hard to efficiently filter hops and trub. Features: Proprietary filtration screen efficiently filters hops and trub Plug resistant Attaches directly to ANVIL™ Kettles and 1/2" Diptubes Easily Cleaned Durable stainless construction Patent pending design

Read more less

The MTSs is a Heating System Upgrade designed for use with Ss Brewtech’s Infusion Mash Tun.  During extended Mash periods or in relatively cold ambient temperatures, the mash will naturally drop in temperature.  This system will counteract those temperature drops, and hold a consistent saccharification temperature, helping insure you are making the beer and flavor profiles you planned to produce. The MTSs is a low wattage silicone heater pad, which is bonded to the underside of the 5 degree sloped bottom on your Mash Tun using a strong adhesive backing on the heater pad.  The heater is controlled with a 12 volt digital temp controller.  You simply set your target temperature and the heater will cycle on and off to maintain your set point.  This system is NOT designed for heating water to strike temp and/or step mashing, though it can help with fine tuning your strike water temp those last few degrees and/or maintaining your strike water temp while you are preparing your grist or balancing your water chemistry.    

Read more less

This silicone gasket is for Ss InfuSsion 10 gal false bottoms. Does not fit on Norcal false bottoms.

Read more less

This silicone gasket is for Ss InfuSsion 20 gal false bottoms. Does not fit on Norcal false bottoms.

Read more less

Filter hops, grains, coffee grounds, and other kettle additions Screen sits tight to the edges with the included BrewBuilt silicone screen gasket All stainless welded components with handle for easy install and removal The BrewBuilt Kettle Screen fits perfectly in the BrewBuilt Brewing Kettle and can be used to filter hop additions, convert the kettle into a mash tun, or for making large batches of cold brew coffee. The welded stainless steel flat bar feet sit on the bottom of your kettle and positions the screen approximately 3/8" above the kettle's bottom port. The silicone gasket creates a tight seal around the kettle wall to retain solids above the screen when transferring liquid out of the kettle.

Read more less

This Ss Brewtech fitting helps with recirculation in your mash tun. It has a 1/2" FPT on the mash tun side, a 1/2" MPT on the opposite side, and a 1/2" hose barb on the bottom of the tee. Made with 304 stainless steel.

Read more less

1/8 in. Adapter for 20 in. Sight Glass.

Read more less

Thread size at the bottom is 1/8" MPT

Read more less

Thread size at the bottom is 1/8" MPT

Read more less

Replacement stopper bumber for The Ultimate Sparge Arm.

Read more less