Plastic & Brass Quick Disconnects

Use these high quality, food-grade quick-disconnects on your gas and beer tubing lines. Uses might include the following: * On a gas system to unhook your tank and regulator from your manifold so you take it with you. * On a beer line to easily switch between ball lock, pin-lock, or a commercial tap * On a counter-pressure bottle filler to be able to easily connect to your existing gas line. This plastic quick disconnect set features 1/4" barb which can be used with tubing ID 3/16" through 5/16". The quick disconnect functionality is activated by a shrouded thumb latch. The temperature range is -40F to 180F. They can handle a vacuum to 120 psi - so you need not worry about them leaking gas. The internal valve spring is 316 type stainless steel and the o-ring is food grade buna-n.

Read more less

These quick disconnects feature 1/4" barbed fittings which can be used with either 3/16", 1/4" or 5/16" line. The quick disconnect functionality is activated by a shrouded thumb latch. The temperature range is -40F to 180F. They can handle a vacuum to 120 psi - so you need not worry about them leaking gas. The internal valve spring is 316 type stainless steel and the o-ring is food grade buna-n. For the female side, see our H550B.

Read more less

O Ring for Beer & Gas Line QD (for H550A)

Read more less

Savvy homebrewers love quick disconnects on their gas lines! They give you the ability to quickly move hoses from one configuration to another with ease!   These quick disconnects feature 1/4" barbed fittings which can be used with 3/16", 1/4" or 5/16" line. The quick disconnect functionality is activated by a shrouded thumb latch. The temperature range is -40F to 180F. They can handle a vacuum to 120 psi - so you don’t need to worry about them leaking gas. The internal valve spring is 316 type stainless steel and the o-ring is food grade Buna-N.   In short, these QDs are durable, user friendly and versatile. A no-brainer! For the male side, see our H550A, or buy both sides together as a set.

Read more less

Kent Quick Disconnects are a great way to start building some basic connectivity in your home brewery. This lineup of Quick Disconnects is affordable on the budget of any brewer. These are designed for single-handed use, can withstand temperatures up to 250°F and pressure up to 125 p.s.i.! The lineup has enough different options to adapt for use anywhere in the brewery: 1/2" MPT, 3/8" Barbs, and 1/2" Barbed, all with both female and male QD options! Customizing your brewery to ease the brew day doesn't have to cost hundreds of dollars and involve heaps of stainless, get things connected easily and cheaply with the Kent QDs! A single-handed connection and disconnection Single barb system which eliminates the use of hose clamps in most applications Can handle up to 250 degrees, extremely durable, medical-grade compliant and made from FDA approved material Easy installation into your home brewery KENT Systems quarter turn design functions safely regardless of pressure up to 125 p.s.i. An affordable version for homebrewers who want an introduction into the world of quick disconnects. MADE IN THE USA!

Read more less

Kent Quick Disconnects are a great way to start building some basic connectivity in your home brewery. This lineup of Quick Disconnects is affordable on the budget of any brewer. These are designed for single-handed use, can withstand temperatures up to 250°F and pressure up to 125 p.s.i.! The lineup has enough different options to adapt for use anywhere in the brewery: 1/2" MPT, 3/8" Barbs, and 1/2" Barbed, all with both female and male QD options! Customizing your brewery to ease the brew day doesn't have to cost hundreds of dollars and involve heaps of stainless, get things connected easily and cheaply with the Kent QDs! Features: Male Kent QD with 3/8" barb on the other end. A single-handed connection and disconnection Can handle up to 250 degrees, extremely durable, medical-grade compliant and made from FDA approved material Easy installation into your home brewery KENT Systems quarter turn design functions safely regardless of pressure up to 125 p.s.i. An affordable version for homebrewers who want an introduction into the world of quick disconnects. MADE IN THE USA!

Read more less

Quick Disconnects are a favorite among homebrewers for their ability to quickly move from one configuration to another.   With the Brass Quick Disconnect Set you can easily connect and disconnect your water line to various equipment. These QD's must be placed in a configuration where water is always exiting the female portion of the QD and entering the male portion of the QD. For example the Female threads x Female QD portion is placed on the end of the hose while the Male QD portion is connected to your equipment.   This set includes one Male GHT (Garden Hose Thread) x Male QD and one Female GHT x Female QD.    We sell several adapter pieces that allow you convert GHT to male or female 1/2 inch pipe thread or 1/2 inch hose barb, making it a snap mount these QDs on just about any piece in your brewery.   Please Note: This product will NOT work with our Stainless Steel or Plastic Quick Disconnects.

Read more less

Savvy homebrewers love quick disconnects on their gas lines! They give you the ability to quickly move hoses from one configuration to another with ease!   These quick disconnects feature 3/8" barbed fittings which can be used with 5/16", 3/8" or 7/16" line. The quick disconnect functionality is activated by a shrouded thumb latch. The temperature range is -40F to 180F. They can handle a vacuum to 120 psi - so you don’t need to worry about them leaking gas. The internal valve spring is 316 type stainless steel and the o-ring is food grade Buna-N.   In short, these QDs are durable, user friendly and versatile. A no-brainer!   This is a direct replacement to the Female Quick Disconnect with 3/8" Barbs that is featured on the BrewBuilt CoolStix™.

Read more less

Works with our H550 series Quick Disconnects.  This is a male Quick Disconnect with 1/4" MPT on the other side. 

Read more less

Kent Quick Disconnects are a great way to start building some basic connectivity in your home brewery. This lineup of Quick Disconnects is affordable on the budget of any brewer. These are designed for single-handed use, can withstand temperatures up to 250°F and pressure up to 125 p.s.i.! The lineup has enough different options to adapt for use anywhere in the brewery: 1/2" MPT, 3/8" Barbs, and 1/2" Barbed, all with both female and male QD options! Customizing your brewery to ease the brew day doesn't have to cost hundreds of dollars and involve heaps of stainless, get things connected easily and cheaply with the Kent QDs! Features: A single-handed connection and disconnection Can handle up to 250 degrees, extremely durable, medical-grade compliant and made from FDA approved material Easy installation into your home brewery KENT Systems quarter turn design functions safely regardless of pressure up to 125 p.s.i. An affordable version for homebrewers who want an introduction into the world of quick disconnects. MADE IN THE USA!

Read more less

Kent Quick Disconnects are a great way to start building some basic connectivity in your home brewery. This lineup of Quick Disconnects is affordable on the budget of any brewer. These are designed for single-handed use, can withstand temperatures up to 250°F and pressure up to 125 p.s.i.! The lineup has enough different options to adapt for use anywhere in the brewery: 1/2" MPT, 3/8" Barbs, and 1/2" Barbed, all with both female and male QD options! Customizing your brewery to ease the brew day doesn't have to cost hundreds of dollars and involve heaps of stainless, get things connected easily and cheaply with the Kent QDs! Features: Female Kent QD with 1/2" barb on the other end. A single-handed connection and disconnection Can handle up to 250 degrees, extremely durable, medical-grade compliant and made from FDA approved material Easy installation into your home brewery KENT Systems quarter turn design functions safely regardless of pressure up to 125 p.s.i. An affordable version for homebrewers who want an introduction into the world of quick disconnects. 3/8" ID 1/2" OD MADE IN THE USA!

Read more less

The LinkTech 60PS Series is a lineup of premium plastic Quick Disconnects.  These High Quality QDs are made from medical grade polypropylene, a high-strength plastic that is temperature tolerant 160° (Max!), and can handle pressure ranging from a vacuum to 60 psi. All of the 60PS Series will interconnect, and these units will also work seamlessly (and leaklessly!) with CPC Quick Disconnects of the same internal 3/8” flow path.  O-rings are a EPDM Rubber, and internal valve springs are constructed from 316 Stainless steel. This is a Female Socket, which can connect to any H501 Series Male Plug.  It has a 1/2" Hose Barb on the other end for attaching any 1/2" ID tubing.  This QD is equipped with a shutoff valve.   When not connected to another QD, this will not allow any flow.  While not quite as bulletproof as our Stainless Steel Quick Disconnects, this lineup does offer a few advantages.  These can be set up with Shutoffs, which will prevent flow when disconnected, and can be incredibly useful on Pump or Glycol systems.  The pricing of these products is more economical, yet the plastic is still medical grade. All in all, these are a premium lineup of quick disconnects with great features and lots of options. Features: LinkTech brand 60PS Series Equipped with Shutoff Valve Connections: Female Socket Quick Disconnect 1/2" Barb Medical Grade Materials: Body: High-Strength Polypropylene Spring: 316 Stainless Steel O-Ring: EPDM Operating Pressure: Vacuum to 60 PSI Temperature Tolerance: -40 to 280°F (-40 to 138°C) 3/8" Flow Path Interchangeable with CPC - Colder HFC35 Series

Read more less

The LinkTech 60PS Series is a lineup of premium plastic Quick Disconnects.  These High Quality QDs are made from medical grade polypropylene, a high-strength plastic that is temperature tolerant 160° (Max!), and can handle pressure ranging from a vacuum to 60 psi. All of the 60PS Series will interconnect, and these units will also work seamlessly (and leaklessly!) with CPC Quick Disconnects of the same internal 3/8” flow path.  O-rings are a EPDM Rubber, and internal valve springs are constructed from 316 Stainless steel. This is a Male Plug, which can connect to any H501 Series Female Socket.  It has 1/2" Male NPT threading for use with any products equipped with 1/2" Female NPT.  This QD is equipped with a shutoff valve.   When not connected to another QD, this will not allow any flow.  While not quite as bulletproof as our Stainless Steel Quick Disconnects, this lineup does offer a few advantages.  These can be set up with Shutoffs, which will prevent flow when disconnected, and can be incredibly useful on Pump or Glycol systems.  The pricing of these products is more economical, yet the plastic is still medical grade.  All in all, these are a premium lineup of quick disconnects with great features and lots of options. Features: LinkTech brand 60PS Series Equipped with Shutoff Valve Connections: Male Plug Quick Disconnect 1/2" MPT Medical Grade Materials: Body: High-Strength Polypropylene Spring: 316 Stainless Steel O-Ring: EPDM Operating Pressure: Vacuum to 60 PSI Temperature Tolerance: -40 to 280°F (-40 to 138°C) 3/8" Flow Path Interchangeable with CPC - Colder HFC35 Series

Read more less

Our new FTSs quick disconnect kit is the perfect way to increase the efficiency of your cooling system while also making it easier to detach your fermenter's chiller coil for easy cleaning.  The neoprene sleeve both insulates and wicks away condensation to reduce temp loss in your FTSs tubing. The sleeve is 10 feet in total length and can be cut to custom lengths to adapt to any FTSs setup.  Once cut, use the included velcro strip to secure the sleeve to the quick disconnect fitting. The quick disconnect fitting was custom tooled for Ss Brewtech with 3/8" hose barbs and features all EPDM seals, which maintain sealing properties at low temperatures.  In addition, they include all stainless internal hardware, and integrated valves in both the male and female components to prevent spilling. These fittings work great with either glycol or chilled water from a cooler.  One Quick Disconnect option: (1) 10' Neoprene Sleeve (1) Quick Disconnect Fitting (2) Velcro strips (4) Stainless hose clamps Two Quick Disconnect option: (1) 10' Neoprene Sleeve (2) Quick Disconnect Fitting (4) Velcro strips (8) Stainless hose clamps  

Read more less

Colder Products® Quick Couplings CPC™ HFC35 Series Polysulfone NSF Listed Straight Hose Barb - Male Connector Without Shutoff Nominal Flow: 3/8" Pressure: Vacuum to 125 psi Temperature: -40° to 280°F Size: 1/2" B Not Compatible with the ALC, PLC or LC Series Large diameter hi gh flow, chemically resistant. Interchangeable with LinkTech brand 60PS Series  

Read more less

Plastic quick disconnect with 3/8" barb which can be used with either 1/4", 5/16" or 3/8" line. The quick disconnect functionality is activated by a shrouded thumb latch on the female QD. The temperature range is -40F to 180F. They can handle a vacuum to 120 psi - so you need not worry about them leaking gas. The o-ring is food grade buna-n. This is a non-valved QD. It does not have an internal shut-off like H550A. For the female side, see our H550B.

Read more less

Made from EPDM material, these gaskets are to replace the stock ones that come with the CPC or LinkTech High Temp Plastic 3/8" Flow Path quick disconnect fittings (our H501 Series)

Read more less

Kent Quick Disconnects are a great way to start building some basic connectivity in your home brewery. This lineup of Quick Disconnects is affordable on the budget of any brewer. These are designed for single-handed use, can withstand temperatures up to 250°F and pressure up to 125 p.s.i.! The lineup has enough different options to adapt for use anywhere in the brewery: 1/2" MPT, 3/8" Barbs, and 1/2" Barbed, all with both female and male QD options! Customizing your brewery to ease the brew day doesn't have to cost hundreds of dollars and involve heaps of stainless, get things connected easily and cheaply with the Kent QDs! Features: Male Kent QD with 1/2" MPT on the other end. A single-handed connection and disconnection Can handle up to 250 degrees, extremely durable, medical-grade compliant and made from FDA approved material Easy installation into your home brewery KENT Systems quarter turn design functions safely regardless of pressure up to 125 p.s.i. An affordable version for homebrewers who want an introduction into the world of quick disconnects. MADE IN THE USA!

Read more less

Kent Quick Disconnects are a great way to start building some basic connectivity in your home brewery. This lineup of Quick Disconnects is affordable on the budget of any brewer. These are designed for single-handed use, can withstand temperatures up to 250°F and pressure up to 125 p.s.i.! The lineup has enough different options to adapt for use anywhere in the brewery: 1/2" MPT, 3/8" Barbs, and 1/2" Barbed, all with both female and male QD options! Customizing your brewery to ease the brew day doesn't have to cost hundreds of dollars and involve heaps of stainless, get things connected easily and cheaply with the Kent QDs! Features: Female Kent QD with 1/2" MPT on the other end. A single-handed connection and disconnection Can handle up to 250 degrees, extremely durable, medical-grade compliant and made from FDA approved material Easy installation into your home brewery KENT Systems quarter turn design functions safely regardless of pressure up to 125 p.s.i. An affordable version for homebrewers who want an introduction into the world of quick disconnects. MADE IN THE USA!

Read more less

This is the male side of the Garden Hose Quick Disconnects. This set enables you to quickly and efficiently connect and disconnect lines from your Wort Chiller, Water Filter, or whatever else you feel could be improved through quicker connections! This product is designed to work in conjunction with our Female Garden Hose Quick Disconnect. Please Note: This product will NOT work with our Stainless or Plastic Quick Disconnects.

Read more less

The LinkTech 60PS Series is a lineup of premium plastic Quick Disconnects.  These High Quality QDs are made from medical grade polypropylene, a high-strength plastic that is temperature tolerant 160° (Max!), and can handle pressure ranging from a vacuum to 60 psi. All of the 60PS Series will interconnect, and these units will also work seamlessly (and leaklessly!) with CPC Quick Disconnects of the same internal 3/8” flow path.  O-rings are a EPDM Rubber, and internal valve springs are constructed from 316 Stainless steel. This is a Female Socket, that can connect to any H501 Series Male Plugs.  It has a 1/2" Hose Barb on the other end for attaching any 1/2" ID tubing. While not quite as bulletproof as our Stainless Steel Quick Disconnects, this lineup does offer a few advantages.  These can be set up with Shutoffs, which will prevent flow when disconnected, and can be incredibly useful on Pump or Glycol systems.  The pricing of these products is more economical, yet the plastic is still medical grade.  All in all, these are a premium lineup of quick disconnects with great features and lots of options. Features: LinkTech brand 60PS Series Connections: Female Socket Quick Disconnect 1/2" Barb Medical Grade Materials: Body: High-Strength Polypropylene Spring: 316 Stainless Steel O-Ring: EPDM Operating Pressure: Vacuum to 60 PSI Temperature Tolerance: -40 to 280°F (-40 to 138°C) 3/8" Flow Path Interchangeable with CPC - Colder HFC35 Series

Read more less

The LinkTech 60PS Series is a lineup of premium plastic Quick Disconnects.  These High Quality QDs are made from medical grade polypropylene, a high-strength plastic that is temperature tolerant 160° (Max!), and can handle pressure ranging from a vacuum to 60 psi.  All of the 60PS Series will interconnect, and these units will also work seamlessly (and leaklessly!) with CPC Quick Disconnects of the same internal 3/8” flow path.  O-rings are a EPDM Rubber, and internal valve springs are constructed from 316 Stainless steel. This is a Female Socket, which can connect to any H501 Series Male Plug. It has 1/2" Male NPT threading for use with any products equipped with 1/2" Female NPT.  This QD is equipped with a shutoff valve.   When not connected to another QD, this will not allow any flow.  While not quite as bulletproof as our Stainless Steel Quick Disconnects, this lineup is still incredibly durable, and does offer a few advantages.  These can be set up with Shutoffs, which will prevent flow when disconnected, and can be incredibly useful on Pump or Glycol systems.  The pricing of these products is more economical, yet the plastic is still medical grade.  All in all, these are a premium lineup of quick disconnects with great features and lots of options. Features: LinkTech brand 60PS Series Equipped with Shutoff Valve Connections: Female Socket Quick Disconnect 1/2" MPT Medical Grade Materials: Body: High-Strength polypropylene Spring: 316 Stainless Steel O-Ring: EPDM Operating Pressure: Vacuum to 60 PSI Temperature Tolerance: -40 to 280°F (-40 to 138°C) 3/8" Flow Path Interchangeable with CPC - Colder HFC35 Series

Read more less

This is the female side of the Garden Hose Quick Disconnects. This set enables you to quickly and efficiently connect and disconnect lines from your Wort Chiller, Water Filter, or whatever else you feel could be improved through quicker connections! This product is designed to work in conjunction with our Male Garden Hose Quick Disconnect. Please Note: This product will NOT work with our Stainless or Plastic Quick Disconnects.

Read more less

This John Guest push-to-connect fitting will accept 3/8" OD tubing on one end and thread onto 1/4" female pipe thread on the other. This is a direct replacement part to the push fittings used on BrewBuilt CoolStix™ and MB Reactor Rods. Pairs perfectly with Beer & Gas Tubing QDs (H551 & H550C) for quick disconnect functionality.

Read more less

The LinkTech 60PS Series is a lineup of premium plastic Quick Disconnects.  These High Quality QDs are made from medical grade polypropylene, a high-strength plastic that is temperature tolerant 160° (Max!), and can handle pressure ranging from a vacuum to 60 psi. All of the 60PS Series will interconnect, and these units will also work seamlessly (and leaklessly!) with CPC Quick Disconnects of the same internal 3/8” flow path.  O-rings are a EPDM Rubber, and internal valve springs are constructed from 316 Stainless steel. This is a Female Socket, which can connect to any H501 Series Male Plug.  It has a 3/8" Hose Barb on the other end for attaching any 3/8" ID tubing.  This QD is equipped with a shutoff valve.   When not connected to another QD, this will not allow any flow.  While not quite as bulletproof as our Stainless Steel Quick Disconnects, this lineup does offer a few advantages.  These can be set up with Shutoffs, which will prevent flow when disconnected, and can be incredibly useful on Pump or Glycol systems.  The pricing of these products is more economical, yet the plastic is still medical grade. All in all, these are a premium lineup of quick disconnects with great features and lots of options. Features: LinkTech brand 60PS Series Equipped with Shutoff Valve Connections: Female Socket Quick Disconnect 3/8" Barb Medical Grade Materials: Body: High-Strength Polypropylene Spring: 316 Stainless Steel O-Ring: EPDM Operating Pressure: Vacuum to 60 PSI Temperature Tolerance: -40 to 280°F (-40 to 138°C) 3/8" Flow Path Interchangeable with CPC - Colder HFC35 Series

Read more less

Not for use under pressure. Can be used for gas tubing like in our MT140 SO2 Test Kit or for splicing racking tubing up to 3/8" ID.

Read more less

Prevents leaks and spills when disconnected, ideal for pressurized systems Handles both hot and sub-zero fluids, from hot transfers to sub-zero glycol mixtures (-40°F to 280°F) Made with high-strength, chemically resistant polyketone plastic body, 316 stainless steel spring, and EPDM O-ring for long-lasting performance JoinTech Connectors offer a premium quick-disconnect solution for high and low-temperature beverage handling. These fittings are suitable for a wide range of applications, from hot transfers to sub-zero glycol mixtures. The connectors feature an automatic shut-off valve that prevents flow when disconnected, making them ideal for hoses used with pumps or glycol systems. Compatible with JoinTech Male QD x 1/2" Male BSPT. Features: Durable, UV-stable black design Automatic shut-off valve Vacuum rating of 60 psi Connections: JoinTech Female QD 13mm barb (0.51") Materials: Body: High-strength, chemically resistant polyketone plastic Spring: 316 stainless steel O-ring: EPDM Specifications: Operating pressure: Vacuum to 60 psi Temperature tolerance: -40°F to 280°F (-40°C to 138°C) Flow path: 3/8" KegLand Part Number: KL41102

Read more less

Prevents leaks and spills when disconnected, ideal for pressurized systems Handles both hot and sub-zero fluids, from hot transfers to sub-zero glycol mixtures (-40°F to 280°F) Made with high-strength, chemically resistant polyketone plastic body, 316 stainless steel spring, and EPDM O-ring for long-lasting performance JoinTech Connectors offer a premium quick-disconnect solution for high and low-temperature beverage handling. These fittings are suitable for a wide range of applications, from hot transfers to sub-zero glycol mixtures. The connectors feature an automatic shut-off valve that prevents flow when disconnected, making them ideal for hoses used with pumps or glycol systems. Compatible with JoinTech Female QD x 1/2" Barb. Features: Durable, UV-stable black design Automatic shut-off valve Vacuum rating of 60 psi Connections: JoinTech Male QD 1/2" Male BSPT Materials: Body: High-strength, chemically resistant polyketone plastic Spring: 316 stainless steel O-ring: EPDM Specifications: Operating pressure: Vacuum to 60 psi Temperature tolerance: -40°F to 280°F (-40°C to 138°C) Flow path: 3/8" KegLand Part Number: KL41096

Read more less