Replacement temperature control circuit board for the KOMOS standard, deluxe, or Double-Wide kegerator. Not compatible with outdoor or commercial kegerators.
Reduce first pour foam by keeping your draft lines icy cold Extra thick neoprene insulates the tower, preventing excess temperature loss to the ambient environment Reduce cooling cycles and save power Customizable to your number and arrangement of faucets Tailor-made for KOMOS kegerators and works with most 3" draft towers The KOMOS draft tower sleeve is made from extra thick 7 mm neoprene, providing great insulation to your tower that will keep your draft lines icy cold. Although the KOMOS kegerators come standard with a tower cooling fan, the stainless steel tower will lose some of that coldness to the warmer ambient environment. By insulating the tower, you can minimize temperature loss, reduce cooling cycles, and saving power. This neoprene insulating tower sleeve will fit KOMOS kegerators like a glove, but can be used with most 3" draft towers. The sleeve comes without holes so it can be customized to fit your faucet arrangement, whether it be single, double, or triple tap. Also available in a size suitable for 4.5" diameter draft towers. Installation: Remove the faucets from the tower, keeping the shanks in place Pull the sleeve down over the tower Mark the position of the shanks and use a sharp pair of scissors to cut a hole in the sleeve Stretch the hole over the shanks and reattach the faucets
If you plan on storing your kegerator outdoors, this is a great way to protect it from the elements. The KOMOS kegerator cover is made from waterproof fabric and has hot tape sealed stitching to protect your kegerator from moisture. It also comes with a panel that you can lift up so you can open the door without having to remove the whole cover.
Reduce first pour foam by keeping your draft lines icy cold Extra thick neoprene insulates the tower, preventing excess temperature loss to the ambient environment Reduce cooling cycles and save power Customizable to your number and arrangement of faucets Tailor-made for KOMOS kegerators and works with most 4.5" draft towers The KOMOS draft tower sleeve is made from extra thick 7 mm neoprene, providing great insulation to your tower that will keep your draft lines icy cold. Although the KOMOS kegerators come standard with a tower cooling fan, the stainless steel tower will lose some of that coldness to the warmer ambient environment. By insulating the tower, you can minimize temperature loss, reduce cooling cycles, and saving power. This neoprene insulating tower sleeve will fit KOMOS kegerators like a glove, but can be used with most 4.5" draft towers. The sleeve comes without holes so it can be customized to fit your faucet arrangement, whether it be single, double, or triple tap. Also available in a size suitable for 3" diameter draft towers. Installation: Remove the faucets from the tower, keeping the shanks in place Pull the sleeve down over the tower Mark the position of the shanks and use a sharp pair of scissors to cut a hole in the sleeve Stretch the hole over the shanks and reattach the faucets
Upgrade the wheels of your Komos kegerator to these heavy duty 100mm wheels. Each wheel is rated up to 220 lbs and made with steel bearings. Includes 2 locking and 2 non-locking wheels. Compatible with Standard and Deluxe models. For the Double-Wide model, see here. Includes 2x locking wheels and 2x non-locking. NOTE: The locking wheels need to be attached on the non-hinged side of the door as the hinge will get in the way of the locking mechanism. Mounting screws are not included.
Replacement starter relay for KOMOS kegerator compressor. Includes compressor starter (black) and compressor protector (white).
Compatible with Standard and Deluxe kegerator models. Not compatible with Double-Wide, outdoor or commercial kegerators.
This set of rolling casters is a direct replacement to those included with the KOMOS V2 Kegerator. They can also be used in your own kegerator or keezer build project by simply attaching them directly to the unit. Mounting hardware not included.
Set of 4 caster wheels. 2 locking, 2 non-locking.
If you plan to install your KOMOS outdoor kegerator under the counter, you'll need this door hinge and mounting screws. When building the kegerator into your outdoor kitchen or home bar, the top cover must be removed. This will replace the top door hinge that is taken away with the cover.
If you've stuffed your kegerator to max capacity, this simple door latch will give you peace of mind. Keeping the door tightly sealed will make sure you're getting optimal efficiency from the kegerator and guarantee the door won't pop open if you have all of your kegs packed in tight. The Double-Wide kegerator comes with pre-tapped mounting holes to install the optional door latch.
A power drill is recommended for mounting the fridge-side latch piece.
Upgrade the wheels of your Komos kegerator to these heavy duty 100mm wheels. Each wheel is rated up to 220 lbs and made with steel bearings. Includes 2 locking and 4 non-locking wheels. Compatible with Double-Wide model. For Standard and Deluxe models, see here. Includes 2x locking wheels and 4x non-locking. NOTE: The locking wheels need to be attached on the non-hinged side of the door as the hinge will get in the way of the locking mechanism. Mounting screws are not included.
Replacement glass door for the left side of the Olympus II or Olympus III kegerator.
Please note: This glass door is a direct replacement part for the standard Olympus model which has been superseded by the Olympus Deluxe model. The door has a black trim rather than the stainless steel trim of the deluxe model.
This solid black door for the left side of the Olympus II or Olympus III kegerator can be installed if you want one of the interior sections of the fridge to be protected from sunlight. The solid doors provide better insulation compared to the glass doors, and will protect beer bottles and draft lines from UV exposure if the fridge is positioned in direct sunlight.
Replacement glass door for the right side of the Olympus II or middle and/or right side of the Olympus III kegerator.
Please note: This glass door is a direct replacement part for the standard Olympus model which has been superseded by the Olympus Deluxe model. The door has a black trim rather than the stainless steel trim of the deluxe model.
