Great beer starts with clean great tasting water. Filtering your brewing water to remove chlorine and chloramines with a carbon filter is a quick and easy way to improve your finished beer. Especially for hoppier beer styles like Pale Ale's & IPA's. We also offer complete RO water systems to truly build your water profile from the ground up using brewing water modifiers.
Want to learn More! about Removing Chloramines from water? Click here to read our article!
Improve the flavor and quality of your beer by filtering your water. This 10" Carbon Block Filter removes chlorine, organic flavor and sediment from your tap water to 10 micron. Open the housing after use and store the filter dry to prevent algae from growing inside the housing. Designed to work with our filter housing or any other standard, 10" housing. Good for 750 gallons. We’ve been told by manufacturers that chloramines can be removed by carbon filtration if the water has a long contact time with the carbon. It is recommended to use at a fill rate of less than 1 gallon per minute in order to remove chloramines. NOTE: This product should not be used in hot water applications. Cold water only! This product is designed to filter water only. NSF standard 42
$10.99
Filter your tap water and eliminate that no-win decision of "should I buy expensive bottled water or use the chlorinated water from the tap." This water filter kit features a 10" carbon block filter that removes all chlorine and organic flavor. Kit includes 10" housing, one carbon block filter, garden hose attachment, barbed fittings and 6' of 3/8" vinyl tubing. The carbon block should be replaced after filtering approximately 800 gallons of water or after 1 year of use, whichever comes first. Filter should be disassembled and stored dry when not in use. NOTE: This product should not be used in hot water applications. Cold water only! This product includes a carbon filter and is designed to filter water only (Carbon filters should not be used to filter beer or wine).
$74.99
"O"- ring for 10" Water Filter Housing FIL32a
$5.49
No more spillovers! Set your desired volume and walk away Automatically collect water while you tend to other tasks Great for collecting brewing water or mixing your cleaning and sanitizing chemicals Illuminated display in splash resistant housing Integrated solenoid valve cuts off flow when your set volume is dispensed 1/2" BSP inlet and outlet work well with Duotight or Type A Camlock fittings Unlike other hose timers that simply measure time, the Fill-O-Meter measures volume and will automatically turn off when the programmed volume of water is dispensed. Enter your desired volume of water, press Start, and tend to other brew day prep work. Install in-line with your water filter to automatically collect filtered strike water, or measure out how much water you need to mix with cleaning chemicals for a precise dilution ratio. We recommend setting up the Fill-O-Meter with either Duotight fittings or Type A Camlocks. Thread tape will be required for the Camlock. Use sparingly as too much plumber's tape can damage the plastic thread. And it is very important to never overtighten! Displays real time flow rate and volume (Liters/Min or Gallons/Min) Accurately measures and controls volumes at flow rates from 1-30L/Min (0.26-7.9Gal/Min) Never overfill or spillover again Splash resistant housing Great for filling tanks, brewing kettles, distilling gear, mixing liquid and many other applications Integrated flow meter and solenoid valve Illuminated display for usage in the evening Integrated sound alarm Easy 1/2" BSP Inlet and Outlet Automatic failsafe - flow is stopped if the unit loses power Important Notes: DO NOT flow liquid the wrong direction, it will break the unit. DO NOT overtighten fittings onto the 1/2" ports. DO NOT exceed temperatures greater than 104°F (40°C) through the unit. Specifications: Flow Range: 1-30L per minute Temperature Range: 32-104°F (0-40°C) LCD: 3 inch back lit display Housing Material: ABS Input/Output threads: BSP 1/2" Pressure Rating: 0-12bar (0-180psi) Accuracy: +/- 5% Please Note: Accuracy can be improved with stable flow. Repeated start/stop or variation in water supply can have negative effect on accuracy. If you are noticing innaccurate fill levels, see the instruction manual for calibration instructions. KegLand Part Number: KL14694
$164.99
Get organized in your brew area and mount your water or beer filter assembly to a wall or directly to your system. Brackets are designed to mount to the top of the canister housing. Screws included.
$11.99
Having trouble loosening the lid of your 10" filter housing (FIL32A)? This spanner wrench will make it much easier. Our BevBright® filters require a tight seal of the lid onto the filter and this wrench is specifically designed to fit our 10" filter housing.
$10.99
A high quality 10" filter housing is the central part of the filtering system you are building up from scratch. Whether you're looking to filter your water ahead of brewing or your finished beer prior to bottling/kegging, this housing will be there to hold your filter media year after year. The same 10" housing found in our FIL32 kit. It has 1/2" FPT ports on both the "in" and "out" of the housing, allowing you to connect hose barbs, valves, or quick disconnects for a fully customized system. Can even be mounted on the wall with our Filter Canister Bracket! For -pre-brewing water filtration, we recommend a Carbon Block filter. For Filter Cartridges to filter beer, see our line of BevBright® Filters. Please Note: This housing is for 10" filter cartridges. Many cartridge filters are 9.785" long, and will allow some bypass if used with this housing. We recommend BevBright® filter cartridges. If you are having trouble removing the lid, try this spanner wrench! Temp range: 40 - 125° F Max pressure: 125 PSI
$54.99
With the BrewRO System you can have access to purified water any time you want without ever leaving the house! This multistage RO/DI water purification system removes 99.9998% of contaminants in water, giving you a clean slate to custom tailor your water profile for your next recipe. Water produced from the BrewRO system is 0 parts per million total dissolved solids. Now that's pure! Water chemistry is perhaps one of the most important (and most intimidating) aspects of brewing a great beer. After all, water is one of the main ingredients! If the tap water at home isn't up to snuff, you probably find yourself making a trip to the store before every brew day to load up on distilled water. Using distilled water is a great strategy that enables you to build your water profile from scratch. This gives you total control over the water's mineral content and pH, allowing you to create the ideal water profile for any particular style. But the gallons upon gallons of store bought distilled water quickly add up, and only increase the cost of each brew day. The BrewRO System comes in two configurations for either city water or well water. They function the same, but come with different filter configurations depending on your water source. Before entering the deionization filter and reverse osmosis membrane, the city water system runs water through two carbon filters, whereas the well water system runs through a sediment filter and then a single carbon filter. The system is conveniently contained within a carrying case with inlets and outlets built into the side. When you're ready to use the BrewRO, simply hook up the white inlet tube to your spigot with the included garden hose adaptor*, run the red "rejected water" tube to a storm drain or water reclamation bucket, and run the blue "treated water" tube to your collection vessel. It's that easy! Well Water System Features: Silver Case Sediment and Carbon Filters Reverse Osmosis Membrane Deionization Filter Hose Adapter 10 ft. of Red, Blue and White Tubing 3 System Plugs City Water System Features: Graphite Case 2 Carbon Filters (No Sediment Filter) Reverse Osmosis Membrane Deionization Filter Hose Adapter 10 ft. of Red, Blue and White Tubing 3 System Plugs Specifications: Collection Rate: Up to 100 gallons per day (4 gallons per hour) Contaminant Removal: Average 99.9998% pure or less than 2 ppm TDS Connections: Standard Hose Attachment NSF Certified Components Filter Life Expectancy: Sediment Filter: 6 - 12 months Carbon Filter: 6 - 12 months DI Filter: 6 months RO Membrane: 3 years Filter lives vary depending on usage, storage, and water quality *Faucet adapter and other accessories are available. See below under You Might Also Need.
$399.99
Small diameter tubing intended for use with water filtration systems and RO systems 150 PSI pressure rating—well-suited to handle your mains water pressure Made from polyethylene. BPA & plasticizer free Compatible with all Duotight and Monotight fittings with 6.35mm ends This PE (polyethylene) tubing is not only BPA and plasticizer free but it's also NSF approved. Suitable for pressures up to 150 PSI so it will have no problem handling your household's mains water pressure. This type of tubing is commonly used with water filtering systems and reverse osmosis (RO) systems. Compatible with the KegLand Solenoid Valve. Can be used with the 6.35mm Duotight In-Line Regulator to drop your mains water pressure if needed. This tubing is compatible with all Duotight and Monotight fittings with 6.35mm ends. Specifications: 5/32" ID x 1/4" OD (4mm x 6.35mm) 33 ft. Roll Pressure rated to 150 PSI Made from polyethylene BPA & Plasticizer free NSF approved KegLand Part Number: KL11143
$18.99
Plastic 1/4" barb with 1/2" male thread. This is the same barb we use on our Beer and Wine Filter Kit (FIL40).
$1.99
A must-have accessory for the BrewRO System! The TDS Monitor hooks up to the incoming and outgoing lines of the BrewRO to measure total dissolved solids. By flipping the switch back and forth you'll be able to see the level of total dissolved solids present in the water entering the system and how pure the water is coming out. Under normal conditions, the Brew RO System will output water that measures between 0 - 2 ppm TDS (99.9998% purity). The best part of the TDS Monitor is that it removes the guesswork of when to change your filters. When the outgoing measurement reads 3 ppm or higher, it's time to order a new set.
$39.99
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. This item will automatically ship when the manufacturer has more inventory in late January The filters on the BrewRO System will be due for a filter change every 6 to 12 months depending on usage. Thanks to the quick connect fittings, swapping out the filters is a painless process. This set comes with the 3 filters (2 carbon, 1 DI) used in the City Water configuration of the BrewRO System. Carbon Filters: Replace every 6 - 12 months Deionization Filter Media: Replace every 6 months Tip: Use the Inline TDS Monitor (FIL102) to measure the total dissolved solids coming out of your BrewRO System and be certain of when it's time to change your filters. Please note: this filter set is intended for the "City Water Configuration" as it includes two carbon filters and no sediment filter. For the well water filter set, see FIL104A. Only use HbrewO replacement filters on your BrewRO System, failure to do so can damage the system.
$24.99
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. This item will automatically ship when the manufacturer has more inventory in mid January Collect Pure water with your BrewRO System without the need to monitor for overflow. The float valve will be triggered once the water reaches the top of your water collection chamber and a pre-built in auto-shut off valve will cut the water off from the pure water line as well and the waste water line.
$34.99
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. This item will automatically ship when the manufacturer has more inventory in late January This faucet adapter for the BrewRO System will allow you to filter water from a sink faucet instead of the garden hose spigot. Water collection can take hours, which is why there's a convenient diverter valve that allows you to access the water from your faucet without having to disconnect the entire adapter. Uses a 1/4" compression fitting and comes with a male to male adapter.
$9.99
Replacement RO membrane for the BrewRO System. The RO membrane should be changed every 3 years. Only use HbrewO replacement filters on your BrewRO System, failure to do so can damage the system.
$39.99
This super handy Solenoid Valve is compatible with 1/4" or 6.35 mm OD PE Water Line or EVABarrier tubing. This size tubing is often used on water filtering systems or reverse osmosis systems, and can be used with an Inline Regulator to drop your mains water pressure if needed. Unlike some other solenoid valves this is a direct acting solenoid valve meaning the solenoid valve can go down to 0 pressure. This makes it quite handy for controlling CO2 flow or other low-pressure gasses. Suitable for pressures up to 115 psi (8 bar) so it will handle water pressure with no problem at all. Made from high-quality metal and POM engineering plastics so it is durable and suitable for contact with a wide range of chemicals and beverages. Specs: Inlet/Outlet: 6.35 mm (1/4") Pressure Rating: 0-115 psi (0-8 Bar) Mode: Normally Closed (NC) Solenoid Coil Voltage: 12V Solenoid Coil Amp Draw: 1.1A KegLand Part Number: KL09478
$10.99
The filters on the BrewRO System will be due for a filter change every 6 to 12 months depending on usage. Thanks to the quick connect fittings, swapping out the filters is a painless process. This set comes with all 3 filters used in the Well Water configuration of the BrewRO System. Sediment Filter: Replace every 6 - 12 months Carbon Filter: Replace every 6 - 12 months Deionization Filter Media: Replace every 6 months Tip: Use the Inline TDS Monitor (FIL102) to measure the total dissolved solids coming out of your BrewRO System and be certain of when it's time to change your filters. Please note: this filter set is intended for the "Well Water Configuration" as it includes the sediment filter and one carbon filter. The "City Water Configuration" uses two carbon filters and does not use the sediment filter. Only use HbrewO replacement filters on your BrewRO System, failure to do so can damage the system.
$24.99
Replacement deionization filter for the BrewRO System. The deionization filter should be changed every 6 months. Only use HbrewO replacement filters on your BrewRO System, failure to do so can damage the system.
$17.99
Replacement carbon filter for the BrewRO System. The carbon filter should be changed every 6 to 12 months. Only use HbrewO replacement filters on your BrewRO System, failure to do so can damage the system.
$8.99
Replacement sediment filter for the BrewRO System. The sediment filter should be changed every 6 to 12 months depending on usage. Only use HbrewO replacement filters on your BrewRO System, failure to do so can damage the system.
$7.99
