Brew Kettles, Burners & Accessories

Check your fermentation temperature "at-a-glance" with this stick-on liquid crystal thermometer. Waterproof adhesive sticks to glass, plastic and metal, making it compatible with virtually any homebrew fermenter. No need to open your fermenter to take temp readings, and no need to buy a temperature probe or additional equipment. Take a quick peek and know what temp your fermentation is at immediately. Scale reads from 39 - 97°F (4 - 36°C).  

Read more less

The DigiBoil is a versatile electric kettle that can be used as a standalone unit or integrated into your current brew system to serve a variety of functions. Easily brew 5-gallon extract batches. Use it to preheat your strike water or sparge water to a precise temperature. Pair it with a pump and heat exchanger to use it for HERMS brewing. Or slap on a still top lid and condenser for distilling! With so many ways to use the DigiBoil, and an affordable price tag to boot, it's hard not to get excited about this electric kettle! The Gen 2 DigiBoil features an upgraded glass lid, allowing you to monitor your heated or boiling liquid. Interested in using the DigiBoil for all-grain brewing? With the Mash Upgrade Kit, you can easily convert the DigiBoil into an electric mash tun! This DigiBoil model has two built-in heating elements that run off a 110V plug. One element is 1000w and the other is 500w for a combined 1500 watts! The elements can be individually controlled, allowing you to use a single element to gently hold temperatures, or engage both elements to quickly go from steeping temp to boiling. Temperatures are set and automatically maintained through the digital control panel. Simply set your desired temperature and flip on the heating element(s).  Integrated stainless ball valve comes with a 13mm barb (approx. 1/2"). The barb can be removed to attach 1/2" FPT fittings if desired. Features: 304 stainless steel construction 9 gallon total capacity Digital temperature control 110V / 15A power and plug (5 ft. cord) Dual heating element control (1000w and 500w) Heating elements are concealed for easy cleaning 304 stainless steel 1/2" ball valve with 13mm barb (approx. 1/2") Stamped-in volume markers (gallons & liters) Glass lid Temperature reads in °F or °C With elements turned off, hold both +/- buttons to switch between °F or °C Compatible with reflux and pot still (DS130 & DS120)* External Dimensions: 29" H x 15" W (including handles) Internal Dimensions: 19.5" H x 11.75" W ETL Listed *Distilling: to use the DigiBoil with a distilling condenser, you will need to purchase the still top lid and gasket (DS124). Warning: Distilling alcohol without permits or licensing is illegal in many countries, including the United States.  It is the customer's responsibility to research their local, state, and federal laws and abide by those laws. Brewmaster is not responsible for any damage or injury caused by either misuse or unlawful use. Stills can also be used to produce essential oils, vinegar, purified water and engine fuel (requires permit in USA). KegLand Part Number: KL07245

Read more less

Efficient, fast, and versatile.  The new burner from Blichmann Engineering is appropriately named HellFire™!   This dual mode capability burner is unlike anything else on the market and is sure to satisfy all your heating needs.  No wonder it is patent pending!  This custom made burner is tuned to operate in high efficiency mode, and also in a secondary high power mode.  In the high power mode, you'll be amazed with 140,000 BTU/hr output for blazing fast heating - double the power of the previous design.  Waiting for a boil is now a thing of the past.  In the high efficiency mode, you'll get 80,000 BTU/hr and superb heat transfer to the wort and whisper quiet operation.  Plenty of power to keep a rolling boil on a 20 gal batch of beer.  Even our efficiency mode has significantly more power than the competition!  To top off all that power we include a patent pending heat shield to keep that massive power off your valve and thermometer and direct it to your wort. Features: Dual mode capacity High Power Mode: 140,000 BTU/hr Efficiency Mode: 80,000/hr Patent Pending Clip-on Heat Shield keeps valves cool Kettle Retaining bars adjust to accommodate kettles up to 20" in diameter Heavy Gauge Rust free Stainless Steel Construction will keep you brewing for years! Designed for outdoor use, the heat shield and body will protect your brew from wind Can accommodate kettles up to 20" Diameter or 250 lbs. (175 when using leg extensions) Leg Extensions are expected to be available in Late November.  

Read more less

Smaller home brews should still produce results that are just as tasty as larger batches, which is why this 5 Gallon Stainless Steel Kettle is an excellent addition to your home brew setup. This small 5 gallon brewing kettle is a great kettle for the beginning brewer to learn on, as it holds a manageable sized batch and it’s available for a very affordable price. Although this brew kettle is quite economical, it’s also made of high quality 202 stainless steel that is anything but cheap. The 0.5-mm thick sides and bottom are more than thick enough for this amount of liquid, and the riveted stainless steel handles on the kettle’s body make it easy to carry even when filled. This 5 gallon kettle can safely hold up to 3 gallons of wort while boiling, making it the perfect size for extract brewing right in your own home!   Features: 0.5mm thick stainless sides and bottom 10" H x 12.5" D Riveted Handles on Kettle Body Kettle Lid with riveted handle 5 gallon full capacity (3 gallons while boiling) Perfect size for Extract Brewing!

Read more less

All the crucial features of a top-shelf brew kettle at an incredible price! These kettles are the perfect choice for new brewers leaving the kitchen stove and stepping up to the full boil brewing method Made from stainless steel throughout which is easy-to-clean and offers a lifetime of reliable use Two welded 1/2" ports for common threaded brewing accessories—ball valve and barb fitting are included for the bottom port Internal volume markers make it easy to measure pre boil volume and post boil volume Silicone grips made for comfortable, slip-free handling  If you’re searching for a fully featured brew kettle but don't want to break the bank, the Brewmaster 8.5 Gallon Stainless Brew Kettle will certainly do the trick. Made of 100 percent stainless steel and available for a truly amazing price, this reliable brew kettle is perfect for first-time brewers and experienced home brewers alike. Two ½-inch couplers are welded to the side of the kettle, and the bottom coupler can even be threaded on the inside of the kettle to use with a diverter or a kettle tube screen.  These kettles are upgraded with Silicone Grip Handles and Stamped volume markers on the inside, making brew day that much easier. Add an AG405 (domed false bottom) to this stainless brew kettle and you can even use it as a mash tun. Includes a ball valve and a threaded adpator to 3/8" barb for easily attaching transfer tubing. Also included is a thread 1/2" plug for the thermometer port. Thermometer is not included and can be added at any time.   Features: 8.5 Gallon Stainless Steel Brewmaster Brewing Kettle Two Welded 1/2" Full Couplers allow for internal and external attachments Stainless 1/2" Full Port Ball Valve & nipple included for bottom Coupler Stainless 1/2" Plug included for top coupler Stamped Volume Markers Silicone Handle Grips Internal Threading allows for conversion to Mash Tun or addition of whole hop filters Internal Dimensions: 13.75" Tall x 13.75" Ø 1 mm thick walls Made from 201 Stainless Steel Approximate Internal Dimensions 13.75" tall 13.75" wide.   This item does not work with induction burners A ball valve, nipple, and plug are included for the welded couplers.  A thermometer, false bottom, or kettle screen can be added separately

Read more less

A powerful, 304 stainless steel heating element well suited for most kettles. With its weldless design and a diameter of 1.25", it's easy to install. Simply drill a 1.25" hole in your kettle and tightening the nut from the outside. The heating element requires a power cord which can be purchased separately. Electrical connection requires a computer power connection IEC320 C13 to your 110 or 220 v plug). Available in either 1600 watt 110 volt or 2200 watt 220 volt. Features: Food grade, high temperature silicone seal The element itself is 11.5" long, 0.75" diameter Designed for use with 5 gallon batches Please Note - Having electrical devices around liquid can be hazardous, and should not be left unattended. Please use caution while using this device, and read the instruction manual prior to use. Use the 1.25" Hole Saw to drill a hole for this product.   Kegland Part number: KL03513

Read more less

Replacement 3mm thick gasket for the 35L Distillation Lid. Note: The 3mm gasket works well with Gen 3 and older BrewZillas and Gen 1 DigiBoils. If you have a newer model, we recommend the 6mm Gasket for a better seal. To improve the seal further, we highly recommend using the Adjustable Lid Clamps with the Distillation Lid if your unit does not have them. KegLand Part Number: KL03490

Read more less

This Copper Pot Still features male garden hose quick disconnects. Our connection kit includes female quick disconnects and tubing for the coolant inlet and outlet. The Copper Reflux Still is also available with barbed connections. Want to get started distilling high quality spirits? This Reflux still top is a great way to do it! It's designed to create high alcohol neutral spirits. You can then add any kind of flavorings to make it the way you want. The flow management design gives you direct control of the reflux ratio which allows you to fine tune how pure the alcohol ends up. This is only the still top and does not come with a boiler. Combine with a distillation lid to use a BrewZilla or DigiBoil as the base for this Alcoengine brand still top.   Kegland Part number: KL04640  

Read more less

Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. Leg extensions for the new Blichmann Hellfire burner.

Read more less

Achieve a perfect whirlpool everytime with Blichmann's weldless whirlpool kits. They come with 2 different options for the valves. You can get the Blichmann linear flow valve or a 1.5 in TC butterfly valve. Regardless of which valve you choose you can hook up a pump and get a strong whirlpool action to help you settle out some of that unwanted trub! Note: These kits require a hole in your kettle of about 13/16 in. You may drill this hole yourself using the instructions in the documents tab or use these kits if your kettle already has a hole.   Lowest Price Guarantee, this item has MAP pricing so you can be confident you won't find it for less.

Read more less

Turn your kettle into a Heat Exchanged Recirculation Mash System with the HERMS coil from Blichmann Engineering. Comes in two sizes, small for 7.5 to 10 gallon kettles, and large for 15 to 55 gallon kettles. Installation instructions can be found below under "Documents". 304 Stainless Steel Small HERMS Coil fits up to 10 Gallon Kettles Large HERMS Coil fits 15 to 55 Gallon Kettles Easy to install and sanitize bulkhead fittings! 1/2" NPT Connections Includes two 1/2" elbow QuickConnector™ fittings! Dimensions: Small - 7.75" (tall); 25' long tube Large - 9.5" (tall); 32' long tube   Lowest Price Guarantee, this item has MAP pricing so you can be confident you won't find it for less.

Read more less

The Gen 2 DigiBoil features two distinct updates that are not currently pictured in the primary images. The stainless steel lid has been upgraded to a glass lid, allowing you to observe and monitor boil activity. The rubber feet have been replaced with a plastic base that provides improved stability and slightly raises the unit for better ground clearance. Updated images coming soon. The most affordable all-in-one automated all-grain brewing system! Mash grains and boil wort in a single vessel DigiBoil electric kettle automatically maintains mash temperatures with the digital controller Dual heating elements combine for 1500W of power Also available with optional Recirculation Pump Kit! The DigiMash system represents the best value in electric all-grain brewing you'll find. With a 9-gallon DigiBoil electric kettle and the DigiMash stainless steel mashing accessory pack included, this is by far the most affordable way to get into electric all-grain brewing.  It may not have all the bells and whistles of the BrewZilla, but it does have everything you need to mash and boil all in one unit. Setting up and using the DigiMash couldn't be easier. Simply place the false bottom inside the kettle and install the malt pipe, fill with water and heat to your desired strike temperature, then add your grain and set your desired mash temperature on the digital controller. Once your mash is complete, lift up the malt pipe, drain the wort and sparge, then remove the malt pipe and proceed to boil. If you're deciding between the DigiMash and the BrewZilla, there are a couple of key differences worth noting. One of our favorite features of the BrewZilla is the programmable mash steps and delayed start, which the DigiMash does not have. You can still step mash by simply raising the temperature manually on the controller, but the automatic steps are a convenient feature if you want to set it and forget it. The other major difference between the two systems is that the BrewZilla features a built-in pump for recirculating the mash. Recirculation is a great way to improve mash efficiency, but it is far from required for a successful brew day. Using an external pump with the DigiMash is also an option, and one can be integrated for mash recirculation quite easily. Simply connect the ball valve to the inlet of your pump, and then connect the outlet of the pump to our Sparge Arm Assembly. This model comes with the 35L DigiBoil, which has two built-in heating elements that run off a 110V plug. One element is 1000w and the other is 500w for a combined 1500 watts! The elements can be individually controlled, allowing you to use a single element to gently hold temperatures, or engage both elements to quickly go from mash temp to boiling. Temperatures are set and automatically maintained through the digital control panel. Simply set your desired temperature and flip on the heating element(s).  Integrated stainless ball valve comes with a 13mm barb (approx. 1/2"). The barb can be removed to attach fittings with 1/2" FPT, such as our female threaded quick disconnect. DigiBoil Features: 304 stainless steel construction 9 gallon total capacity Digital temperature control 110V / 15A power and plug (5 ft. cord) Dual heating element control (1000w and 500w) Heating elements are concealed for easy cleaning 304 stainless steel 1/2" ball valve with 13mm barb (approx. 1/2") Stamped-in volume markers (gallons & liters) Stainless lid Temperature reads in °F or °C With elements turned off, hold both +/- buttons to switch between °F or °C Recommended max. grain bill - 18 lbs Recommended min. grain bill - 8 lbs External Dimensions: 29" H x 15" W (including handles) Internal Dimensions: 19.5" H x 11.75" W ETL Listed DigiMash Stainless Steel Accessory Pack Includes: False bottom Malt pipe Wire support  Malt pipe handle Malt pipe bottom screen    

Read more less

The Ss Brewtech Whirlpool fitting attaches to the thermometer port, the recirculation port, or another 7/8" hole. Creates a nice whirlpool action that works perfectly with a trub dam to keep out most of the hop matter and other solids from your fermenter. Made from 304 stainless steel. The whirlpool fitting has a 1/2" MPT and comes with 1" x 1/2" bulkhead. Please note this product is intended to be used with a 1/2" FPT ball valve (BE382) on the outside of the kettle. Please see the Whirlpool Fitting Quick Reference Guide below for installation and operation instructions.

Read more less

All the crucial features of a top-shelf brew kettle at an incredible price! Perfectly sized for 20 gallon batch brewers Made from stainless steel throughout which is easy-to-clean and offers a lifetime of reliable use Two welded 1/2" ports for common threaded brewing accessories—ball valve and barb fitting are included for the bottom port Internal volume markers make it easy to measure pre boil volume and post boil volume Silicone grips made for comfortable, slip-free handling  If you’re searching for a fully featured brew kettle but don't want to break the bank, the Brewmaster 25 Gallon Stainless Brew Kettle will certainly do the trick. Made of 100 percent stainless steel and available for a truly amazing price, this reliable brew kettle is perfect for first-time brewers and experienced home brewers alike. Two ½-inch couplers are welded to the side of the kettle, and the bottom coupler can even be threaded on the inside of the kettle to use with a diverter or a kettle tube screen.  These kettles are upgraded with Silicone Grip Handles and Stamped volume markers on the inside, making brew day that much easier. Includes a ball valve and a threaded adpator to 3/8" barb for easily attaching transfer tubing. Also included is a thread 1/2" plug for the thermometer port. Thermometer is not included and can be added at any time.   Features: 25 Gallon Stainless Steel Brewmaster Brewing Kettle Two Welded 1/2" Full Couplers allow for internal and external attachments Stainless 1/2" Full Port Ball Valve & nipple included for bottom Coupler Stainless 1/2" Plug included for top coupler Stamped Volume Markers Silicone Handle Grips Internal Threading allows for conversion to Mash Tun or addition of whole hop filters Approximate Internal Dimensions: 23.5" Tall x 17.75" Ø 1.2 mm thick walls Kettle constructed from 201 stainless steel This item does not work with induction burners. A ball valve, nipple, and plug are included for the welded couplers.  A thermometer, or kettle screen can be added separately

Read more less

Welded 1.5" tri-clamp ports for a lifetime of leak-free use 304 stainless steel construction with mirror polish finish Notched lid provides cover while not interfering with immersion chillers, hop bags, or other accessories Choose from Boil Kettle, Hot Liquor Tank or Mash Tun configurations The Boil Kettle comes without fittings The Hot Liquor Tank includes a Kettle Maximizer and Thermometer with 2" Probe The Mash Tun includes a False Bottom Kit and Thermometer with 6" Probe Add your preferred Valve Hardware Pack when choosing your kettle above or purchase your own valve & fittings separately Designed for Brewing. Built to Last. BrewBuilt brew kettles are made from 304 stainless steel and offer an unparalleled mix of features for the price. At the very top of the list are two welded-in place tri-clamp couplers that offer a lifetime of leak free use.  As you can imagine, welding in a coupler costs more than punching a hole and using a gasketed (i.e. weld-less) fitting. Welded fittings offer a permanent connection that to us is worth every penny.  The second unique feature that we absolutely love about these brew kettles is the notched lid with silicone plug.  This notch allows you so much flexibility; you can use an immersion chiller, one of our Ultimate Sparge Arms for mashing, tie off hop bags, take a temp reading during cooling, or whatever else we all can dream up. Our new T.C. kettles were designed to keep pace with the ever-evolving world of brewing technology. Tri-clamp fittings are standard fare in professional breweries, and they’ve been widely adopted in homebrewing as T.C. fermenters and pumps become more affordable and widely available. Tri-clamp fittings, also known as Tri-clover, allow you to make a sanitary connection that is free of nooks and crannies for contaminants to take hold. They are much easier to break down for cleaning compared to threaded connections, and they don’t require Teflon tape to make a watertight seal. T.C. fittings and accessories also give you the distinct advantage of being able to clean in place (CIP), so you don’t need to break down your entire system after every brew day. Configurations The base boil kettle comes without fittings so you can modify it the specific tri-clamp accessories that best suit your needs. Add one of the optional Brewing Kettle Valve Packs above which include your choice of valve and all the hardware you'll need to connect 1/2" ID transfer tubing, as well as an end cap to seal the top port if a thermometer or other accessory is not in place. The Hot Liquor Tank includes the base kettle plus a kettle maximizer for the bottom port and thermometer with 2" probe for the top port. Clamps and gaskets are included to attach the tri-clamp kettle maximizer and the thermometer. The Mash Tun includes the base kettle plus a false bottom kit for the bottom port and thermometer with 6" probe for the top port. Clamps and gaskets are included to attach the tri-clamp false bottom maximizer and the thermometer. Kettles do not come with a valve or additional fittings for the bottom port as standard. Add one of our pre-configured Valve Packs or purchase your preferred valve and fittings separately. This Brew Kettle has a lot to offer... Some other features we dig include the internal volume markers from the bottom to the top - so handy for instant reads.  The silicone sleeved handles on the kettle and the lid are a cool feature to protect your hands. The tri-clad bottom with a 4mm core of aluminum sandwiched between two layers of stainless steel offers even heat distribution during the boil and also makes it a perfect choice for anyone wanting to use an induction burner.   Beefy 304 Stainless These kettles are made from 304 grade stainless.  That means you will have less corrosion issues than with a kettle made from lower grade 201 type stainless. We put these kettles through a corrosive salt water test in the MoreBeer! shop and they passed with flying colors. We also made sure the rivets and riveted handles were also made of stainless steel for a long term, trouble free life.  The 10 and 15 gallon size are made from 1.0mm thick stainless steel. The 20, 30 and 50 gallon size are made with 1.2mm stainless - that's pretty thick stuff - and you will know it when you pick one up.  Mirror Polish Finish The mirror polish finish isn’t just for making your Instagram feed pop! This extra slick finish is much easier to clean and sanitize than a standard brushed stainless kettle. Hop trub and other organic solids left behind after a brew day will have a hard time clinging to the interior surface and scrub away with ease. Size Ratios and Stuff All the BrewBuilt kettles follow the recent trend to a 1.2:1 ratio where the height is 1.2 times the diameter. This is a proven commercial ratio that has been adopted in homebrewing to achieve a more consistent 10% evaporation rate during the boil.  We do like this ratio for boiling. For Mashing we would prefer a little bit shallower but that is a small compromise. Dimensions for a hot-liquor tank, if you are thinking brewing system down the road, are irrelevant as any ratio kettle will do. Features: Two welded T.C. couplers for a lifetime of leak free use Notched lid with silicone plug for flexibility 304 stainless steel construction for longevity 1.0mm (10 & 15 gal) or 1.2mm (20, 30 & 50 gal) thick side walls resist denting 4mm Tri-Clad Aluminum bottom sandwiched between two layers of stainless steel for no scorching Internally etched volume markers from top to bottom for easy reading 1.2:1 Ratio is optimal for boiling evaporation rate Lid is designed to conveniently hang from a handle Side handles with silicone coated handles for heat protection Stainless handles with stainless rivets for secure lifting   Size Kettle ID (in.) Height (in.) 10 Gallon 13.78 16.54 15 Gallon 15.75 18.90 20 Gallon 17.72 21.26 30 Gallon 19.69 23.62 50 Gallon 23.62 28.30    

Read more less

Replacement Gaskets for your BrewBuilt Mash Tun.  These are custom pieces we've designed for the BrewBuilt Mash tuns.  Their only purpose?  Assist you in brewing the best beer possible. Solid single piece silicone molded construction will last you for a number of brews, but whether you lose yours, or manage to break it, we have replacements. For a complete False Bottom Kit that includes the necessary Screen and Pickup Tube, see our BrewBuilt Mash Tun False Bottom Kits.  Or for a complete Mash Tun, see our BrewBuilt Mash Tuns. Lowest Price Guarantee, this item has MAP pricing so you can be confident you won't find it for less.

Read more less

All the crucial features of a top-shelf brew kettle at an incredible price! Perfectly sized for 10 gallon batch brewers Made from stainless steel throughout which is easy-to-clean and offers a lifetime of reliable use Two welded 1/2" ports for common threaded brewing accessories—ball valve and barb fitting are included for the bottom port Internal volume markers make it easy to measure pre boil volume and post boil volume Silicone grips made for comfortable, slip-free handling  If you’re searching for a fully featured brew kettle but don't want to break the bank, the Brewmaster 14 Gallon Stainless Brew Kettle will certainly do the trick. Made of 100 percent stainless steel and available for a truly amazing price, this reliable brew kettle is perfect for first-time brewers and experienced home brewers alike. Two ½-inch couplers are welded to the side of the kettle, and the bottom coupler can even be threaded on the inside of the kettle to use with a diverter or a kettle tube screen.  These kettles are upgraded with Silicone Grip Handles and Stamped volume markers on the inside, making brew day that much easier. Includes a ball valve and a threaded adaptor to 3/8" barb for easily attaching transfer tubing. Also included is a threaded 1/2" plug for the thermometer port. Thermometer is not included and can be added at any time.   Features: 14 Gallon Stainless Steel Brewmaster Brewing Kettle Two Welded 1/2" Full Couplers allow for internal and external attachments Stainless 1/2" Full Port Ball Valve & nipple included for bottom Coupler Stainless 1/2" Plug included for top coupler Stamped Volume Markers Silicone Handle Grips Internal Threading allows for conversion to Mash Tun or addition of whole hop filters 1.2 mm thick walls Made from 201 Stainless Steel Approximate Dimensions 17.5" tall 16" wide, 1.2mm thick  This item does not work with induction burners A ball valve, nipple, and plug are included for the welded couplers.  A thermometer, false bottom, or kettle screen can be added separately

Read more less

No one wants a leak in his or her brew kettle, which is why the Blichmann BrewMometer Hole Plug Kit is such an essential part of your Blichmann home brewing setup. This innovative part can be used to plug the hole if you need to remove the thermometer from your brew kettle, and it is designed especially to fit inside of the hole left behind by the thermometer. The Blichmann BrewMometer Hole Plug Kit can also be used to plug the thermometer hole if you decide to brew a smaller batch in a larger kettle, making your setup incredibly versaitle for any brew size. Simply drill a new hole wherever you want to place the thermometer, then use the convenient hole plug kit to securely stop liquid and heat from escaping through the exisiting thermometer hole. Because the Blichmann BrewMometer Hole Plug Kit is also made by the popular brewing brand Blichmann, you can feel confident that it will work seamlessly with your other Blichmann products.  Size: 1/2-20x1/2 hex head cap screw  

Read more less

Replacement Ball Valve for the Gen 3 BrewZilla / DigiBoil. Silicone washer and stainless nut included, but not pictured. Not compatible with BrewZilla Gen 4. 1/2" MPT 13.5 mm barb (apprx. 1/2") 304 stainless steel construction KegLand Part Number: KL03728

Read more less

The BrewCommander™ complete brewhouse controller is available in electric and gas/propane models! The patent pending BrewCommander™ is a unique, innovative, high-quality brewhouse controller with ultra-high accuracy and precision with the ultimate in flexibility. Whether system-integrated or freestanding, the BrewCommander™ offers automated step mashing, boil timers and amazing advanced settings. Whatever your heating source or brewing setup, the BrewCommander™ offers precision temperature control with increased accuracy and repeatability. The BrewCommander™ Brewhouse Controller is a high precision, intuitive, complete brewhouse touchscreen controller for automatically ramping and maintaining the temperature of your boil kettle, mash tun, or hot liquor tank. With linear digital power control, automated mash profile ramping, boil addition timers, pump control, delayed starting, and easy to use advanced control settings, the BrewCommander™ is clearly in a league of its own. It’s a perfect plug-and-play match for controlling your HellFire™ burner, or other direct spark heaters, and can be powered from a standard 15 Amp 120V Outlet.  Be sure to download the manual and watch our videos for more detail!   Key Features: Intuitive Touchscreen Interface. Keypad Data Entry. Advanced Temperature Control Algorithm. Automated Step Mashing (up to 5 steps and 9 profiles). Boil Addition Timers (up to 7 additions and 9 profiles). Integral Pump Switch. Lab Grade Precision Thermometer - Superior to RTD's. Customizable Settings - Basic and Advanced. Mash Step Ramp Rate Delay. HERMS / RIMS Offsets. Audible Alarms. Upgradable Firmware. Switchable Between Table and Wall Mounting. Modular - Connect Multiple Units! Optional SparkBox™ Remote Ignition Module. Offered in Electric or Gas Versions. Lowest Price Guarantee, this item has MAP pricing so you can be confident you won't find it for less.

Read more less

The Blichmann HopRocket™ is a great tool for all hop-heads. Mainly used as a hop back, but has also been used inline in dispensing draft beer (Randal). The Hop Rocket can fit up to 3oz. of whole leaf hops to add that extra hop kick to any beer!   Pressure tight up to 40PSI! Holds up to 3oz. of whole leaf hops 100% Stainless steel construction with silicone gaskets No need to monitor the wort levels as it will not overflow Fine filter with wiper seal sends very clear wort to your fermenter Coarse filter and coned bottom inlet help prevent backup and wort channeling Uses 1/2" NPT connections for a universal fit!

Read more less

Ready to upgrade your DigiBoil into a DigiMash? With the DigiMash upgrade kit you can convert the DigiBoil into a full blown electric all-in-one system. Includes false bottom, malt pipe with bottom screen, wire support, and malt pipe handle. Simply place the false bottom inside the kettle and install the malt pipe, fill with water and heat to your desired strike temperature, then add your grain and set your desired mash temperture on the digital controller. Once your mash is complete, lift up the malt pipe, drain the wort and sparge, then remove the malt pipe and proceed to boil. Includes: False bottom Malt pipe Wire support  Malt pipe handle Malt pipe bottom screen Installation & Use: Place the false bottom inside the kettle Install the wire support in the channel located at the top of the kettle Place the mesh screen inside the malt pipe and attach the handle Lower the malt pipe into the kettle so it rests on the wire support Fill with strike water and heat to desired strike temperature When desired temperature is reached, add grain and stir until well mixed When your mash is complete, use the handle to lift out malt pipe and rotate 90° so the malt pipe feet sit on the wire support Allow the wort to drain into the kettle and sparge the grain with warm water (165-175°F) When you're done collecting your wort, remove the malt pipe and proceed to boil   Please note: only the 500-watt element should be used to increase mash temperatures when the Malt Pipe is in place. Using the higher watt element(s) with the Malt Pipe inserted may cause scorching of the grain.   Kegland Part Number: KL13055

Read more less

Secure silicone hose to your mash tun during recirculation Large circular center of the clamp leaves room for tubing without pinching Excellent chemical resistance to common brewing cleaners and sanitizers Able to withstand boiling temperatures This handy spring clamp features a heavy-duty muslin spring which ensures your silicone hose never accidentally pops out of your mash tun and spills your precious nectar over your brewery floor. The large circular space between the arms of the clamp is perfect for passing 1/2" silicone tubing through without pinching. Rounded handles for a comfortable grip and a PE end grip to ensure your hosing is kept secure. Made from Polypropylene and Polyethylene which have good chemical resistance so it will stand up to the task for use around common brewing cleaners and sanitizers. Temperature Rating: 32-248°F KegLand Part Number: KL24686

Read more less

The Gen 2 DigiBoil features two distinct updates that are not currently pictured in the primary images. The stainless steel lid has been upgraded to a glass lid, allowing you to observe and monitor boil activity. The rubber feet have been replaced with a plastic base that provides improved stability and slightly raises the unit for better ground clearance. Updated images coming soon. The most affordable all-in-one automated all-grain brewing system! Mash grains and boil wort in a single vessel DigiBoil electric kettle automatically maintains mash temperatures with the digital controller Dual heating elements combine for 2400W of power Also available with optional Recirculation Pump Kit! The DigiMash system represents the best value in electric all-grain brewing you'll find. With a 9-gallon DigiBoil electric kettle and the DigiMash stainless steel mashing accessory pack included, this is by far the most affordable way to get into electric all-grain brewing. It may not have all the bells and whistles of the BrewZilla, but it does have everything you need to mash and boil all in one unit. Setting up and using the DigiMash couldn't be easier. Simply place the false bottom inside the kettle and install the malt pipe, fill with water and heat to your desired strike temperature, then add your grain and set your desired mash temperature on the digital controller. Once your mash is complete, lift up the malt pipe, drain the wort and sparge, then remove the malt pipe and proceed to boil. If you're deciding between the DigiMash and the BrewZilla, there are a couple of key differences worth noting. One of our favorite features of the BrewZilla is the programmable mash steps and delayed start, which the DigiMash does not have. You can still step mash by simply raising the temperature manually on the controller, but the automatic steps are a convenient feature if you want to set it and forget it. The other major difference between the two systems is that the BrewZilla features a built-in pump for recirculating the mash. Recirculation is a great way to improve mash efficiency, but it is far from required for a successful brew day. Using an external pump with the DigiMash is also an option, and one can be integrated for mash recirculation quite easily. Simply connect the ball valve to the inlet of your pump, and then connect the outlet of the pump to our Sparge Arm Assembly. This model comes with the 35L DigiBoil, which has two built-in heating elements that run off a 220V plug. One element is 1900w and the other is 500w for a combined 2400 watts! The elements can be individually controlled, allowing you to use a single element to gently hold temperatures, or engage both elements to quickly go from mash temp to boiling. Temperatures are set and automatically maintained through the digital control panel. Simply set your desired temperature and flip on the heating element(s). If you have access to 220V power, this is definitely the unit we recommend. Although 110V power is enough to get up to boil, 220V will get you there faster and provide a much more vigorous boil. Integrated stainless ball valve comes with a 13mm barb (approx. 1/2"). The barb can be removed to attach fittings with 1/2" FPT, such as our female threaded quick disconnect. DigiBoil Features: 304 stainless steel construction 9 gallon total capacity Digital temperature control 220V / 15A power  NEMA 6-30R plug (5 ft. cord) Dual heating element control (1000w and 500w) Heating elements are concealed for easy cleaning 304 stainless steel 1/2" ball valve with 13mm barb (approx. 1/2") Stamped-in volume markers (gallons & liters) Stainless lid Temperature reads in °F or °C With elements turned off, hold both +/- buttons to switch between °F or °C Recommended max. grain bill - 18 lbs Recommended min. grain bill - 8 lbs External Dimensions: 29" H x 15" W (including handles) Internal Dimensions: 19.5" H x 11.75" W ETL Listed DigiMash Upgrade Includes: False bottom Malt pipe Wire support  Malt pipe handle Malt pipe bottom screen    

Read more less

These leg extensions allow the Anvil Brewing burner to raise to a height of 24". Now easily transfer to another container, such as a carboy, with just the use of gravity. You can also set up a 2 tier brew system.

Read more less

The Copper Pot Still is perfect when you want the flavor of the wash to come through, whereas a Reflux Still is more favorable for producing pure, unflavored spirits. If you want to make whiskeys and gins, this pot still top is a great way to start! The classic "V" shape captures the vital esters, aldehydes, and phenolic compounds that are necessary for the complex spirits such as whiskeys and gins. Made from solid copper. When your hot spirit comes into contact with the copper, the copper acts like a catalytic converter to drive sulfur out of the spirit. This leads to less off-flavors and higher quality spirit. This is only the still top and does not come with a boiler. This is only the still top and does not come with a boiler. Combine with a distillation lid to use a BrewZilla or DigiBoil as the base for this Alcoengine brand still top. Comes with 13 mm (0.51") barb connections for the water inlet and outlet.   Kegland Part number: KL16155  

Read more less

The Gen 2 DigiBoil features two distinct updates that are not currently pictured in the primary images. The stainless steel lid has been upgraded to a glass lid, allowing you to observe and monitor boil activity. The rubber feet have been replaced with a plastic base that provides improved stability and slightly raises the unit for better ground clearance. Updated images coming soon. The most affordable all-in-one automated all-grain brewing system! Mash grains and boil wort in a single vessel DigiBoil electric kettle automatically maintains mash temperatures with the digital controller Triple heating elements combine for 3500W of power Also available with optional Recirculation Pump Kit! The DigiMash system represents the best value in electric all-grain brewing you'll find. With a 17-gallon DigiBoil electric kettle and the DigiMash stainless steel mashing accessory pack included, this is by far the most affordable way to get into electric all-grain brewing at the 10-gallon batch level. It may not have all the bells and whistles of the BrewZilla, but it does have everything you need to mash and boil all in one unit. Setting up and using the DigiMash couldn't be easier. Simply place the false bottom inside the kettle and install the malt pipe, fill with water and heat to your desired strike temperature, then add your grain and set your desired mash temperature on the digital controller. Once your mash is complete, lift up the malt pipe, drain the wort and sparge, then remove the malt pipe and proceed to boil. If you're deciding between the DigiMash and the BrewZilla, there are a couple of key differences worth noting. One of our favorite features of the BrewZilla is the programmable mash steps and delayed start, which the DigiMash does not have. You can still step mash by simply raising the temperature manually on the controller, but the automatic steps are a convenient feature if you want to set it and forget it. The other major difference between the two systems is that the BrewZilla features a built-in pump for recirculating the mash. Recirculation is a great way to improve mash efficiency, but it is far from required for a successful brew day. Using an external pump with the DigiMash is also an option, and one can be integrated for mash recirculation quite easily. Simply connect the ball valve to the inlet of your pump, and then connect the outlet of the pump to our Sparge Arm Assembly. This model comes with the 65L DigiBoil, which has three built-in heating elements that run off a 220V plug. The elements are 2000w, 1000w and 500w for a combined 3500 watts! The elements can be individually controlled, allowing you to use a single element to gently hold temperatures, or engage all three elements to quickly go from steeping temp to boiling. Temperatures are set and automatically maintained through the digital control panel. Simply set your desired temperature and flip on the heating element(s). Integrated stainless ball valve comes with a 13mm barb (approx. 1/2"). The barb can be removed to attach fittings with 1/2" FPT, such as our female threaded quick disconnect. DigiBoil Features: 304 stainless steel construction 17 gallon total capacity Digital temperature control 220V / 20A power NEMA 6-30R plug (4.5 ft. cord) Triple heating element control (2000w, 1000w and 500w) Heating elements are concealed for easy cleaning 304 stainless steel 1/2" ball valve with 13mm barb (approx. 1/2") Stamped-in volume markers (gallons & liters) Glass lid Temperature reads in °F or °C With elements turned off, hold both the +/- buttons to switch between °F or °C External Dimensions: 29" H x 19.5" W (including handles) Internal Dimensions: 20.25" H x 15.75" W ETL Listed DigiMash Upgrade Includes: False bottom Malt pipe Wire support  Malt pipe handle Malt pipe bottom screen NOTE: Due to the size of this item, it is not eligible for international shipping.  

Read more less

Our Premium BIAB (Brew In A Bag) kettle and bag kit is the most affordable way to get into all-grain brewing.  This hardware kit includes a stainless steel kettle, ball valve, hose barb connection, 1/2" plug and plumbers tape to seal the connections. While it does not include directions (you can easily Google BIAB), the basic concept is that you place the bag in the kettle, add the grain from your recipe along with a measured amount of hot water and let it steep for 60 minutes. You then remove the bag and boil with hops in the same vessel.  Very easy. Available with either an 8.5 or 14 gallon kettle. Brew in a bag kit includes: Stainless steel brew kettle with 1/2" FPT fittings 1/2" stainless steel ball valve, with stainless hex nipple and 1/2" stainless steel barb Stainless steel plug for thermometer port 29" X 29" nylon mesh bag with drawstring Roll of plumbers tape  

Read more less

Adjustable propane pressure regulator up to 10 psi. For our H205 & H250 burners.  This propane regulator will attach a standard BBQ style propane tank to a brewing burner and has a 3/8-in flare swivel fitting. These item is not intended for indoor use.  

Read more less

The best way to make your own mash tun out of one of your Ss Brew Kettles. These false bottoms are domed and have a central suction point. Features: Made from 304 stainless steel Domed shape Central suction point Welded handle Silicone gasket Note: These false bottoms are designed for the Ss Brewtech Brew Kettles and will not fit other kettles. They are also not compatible with the Ss Brewtech BME Kettles.   Lowest Price Guarantee, this item has MAP pricing so you can be confident you won't find it for less.

Read more less

Ready to upgrade your DigiBoil into a DigiMash? With the DigiMash upgrade kit you can convert the DigiBoil into a full blown electric all-in-one system. Includes false bottom, malt pipe with bottom screen, wire support, and malt pipe handle. Simply place the false bottom inside the kettle and install the malt pipe, fill with water and heat to your desired strike temperature, then add your grain and set your desired mash temperature on the digital controller. Once your mash is complete, lift up the malt pipe, drain the wort and sparge, then remove the malt pipe and proceed to boil. The Gen 2 DigiMash Upgrade Kit is backwards compatible with Gen 1 DigiBoils. Includes: False bottom Malt pipe Wire support  Malt pipe handle Malt pipe bottom screen Installation & Use: Place the false bottom inside the kettle Install the wire support in the channel located at the top of the kettle Place the mesh screen inside the malt pipe and attach the handle Lower the malt pipe into the kettle so it rests on the wire support Fill with strike water and heat to desired strike temperature When desired temperature is reached, add grain and stir until well mixed When your mash is complete, use the handle to lift out malt pipe and rotate 90° so the malt pipe feet sit on the wire support Allow the wort to drain into the kettle and sparge the grain with warm water (165-175°F) When you're done collecting your wort, remove the malt pipe and proceed to boil Please note: only the 500-watt element should be used to increase mash temperatures when the Malt Pipe is in place. Using the higher watt element(s) with the Malt Pipe inserted may cause scorching of the grain. Kegland Part Number: KL12980

Read more less

All the crucial features of a top-shelf brew kettle at an incredible price! Perfectly sized for 15 gallon batch brewers Made from stainless steel throughout which is easy-to-clean and offers a lifetime of reliable use Two welded 1/2" ports for common threaded brewing accessories—ball valve and barb fitting are included for the bottom port Internal volume markers make it easy to measure pre boil volume and post boil volume Silicone grips made for comfortable, slip-free handling  If you’re searching for a fully featured brew kettle but don't want to break the bank, the Brewmaster 18.5 Gallon Stainless Brew Kettle will certainly do the trick. Made of 100 percent stainless steel and available for a truly amazing price, this reliable brew kettle is perfect for first-time brewers and experienced home brewers alike. Two ½-inch couplers are welded to the side of the kettle, and the bottom coupler can even be threaded on the inside of the kettle to use with a diverter or a kettle tube screen.  These kettles are upgraded with Silicone Grip Handles and Stamped volume markers on the inside, making brew day that much easier. Includes a ball valve and a threaded adpator to 3/8" barb for easily attaching transfer tubing. Also included is a thread 1/2" plug for the thermometer port. Thermometer is not included and can be added at any time.   Features: 18.5 Gallon Stainless Steel Brewmaster Brewing Kettle Two Welded 1/2" Full Couplers allow for internal and external attachments Stainless 1/2" Full Port Ball Valve & nipple included for bottom Coupler Stainless 1/2" Plug included for top coupler Stamped Volume Markers Silicone Handle Grips Internal Threading allows for conversion to Mash Tun or addition of whole hop filters Internal Dimensions: 18" Tall x 17.75" Ø Made from 201 Stainless Steel Approximate Internal Dimensions 18" tall 17.75" wide.  1.2 mm thick walls This item does not work with induction burners A ball valve, nipple, and plug are included for the welded couplers.  A thermometer, or kettle screen can be added separately

Read more less

These hot fill bladders are a great way to cut time out of your brew day using the "no chill" or "hot packing" method of cooling wort. When your boil is over, simply fill them up and wait for the wort to chill overnight or throw it in the fridge. This eliminates the traditional 30-60 minutes of chill time common in most brew days.  Use the wort immediately after it has cooled down, or store refrigerated for short periods of time. When chilled and ready to go, most brewers transfer the wort out of the bag and into their favorite fermenter. However it is possible to ferment directly in the bag with the use of a #7 stopper and airlock. Hot packing and the storage of wort at room temperature has been done in Australia as a common practice for decades.  Because of the temperature of wort entering the bag, any bacteria are killed. However there does exist a small chance of Botulism contamination for wort that is hot packed and stored.  Botulism spores can survive a boil and are only killed through high temperature pasteurization. We always recommend using the wort as quickly as possible once it has cooled.   Hot fillable means they can be filled with any liquid up to 212°F.  The triple layer construction makes these bags puncture resistant, chemical resistant, and gives the bag superior oxygen barrier properties. The first layer is 50-micron polyethylene, the second is 45-micron polyethylene, and the third is 15-micron nylon. 5.2 gal / 20L capacity. KegLand Part Number: KL18463  

Read more less

Having your pump securely mounted where you want it gives you a more stable unit that is easier to control.   With this stainless mounting bracket you can mount your pump right where you want it in your brewing setup. It has two pre-drilled holes so you can attach it to a brewing stand, cart, etc. After you have secured the mounting bracket you can easily slide your pump into place and remove it when you're finished, if desired. Keep your brew system tidier during brewing by giving your pump a dedicated mount to keep it out of the way.   Fits our Chugger Pumps (H331 and H332).  

Read more less