1/4" flared inline check valve can be used with any flare threaded ball lock or pin lock quick disconnect
Allows gas to flow out, but won't allow backflow of liquid into your gas system
Ideal safety measure if you force carbonate your beer using the bev out dip tube
Built-in flare washer—no need for a separate nylon washer that is required with stainless steel QDs (male flare threaded side only)
CMBecker is an international manufacturer of beverage dispensing solutions for both home and professional draft equipment
Add this inline check valve to any flared gas-in disconnect and protect your draft system! The check valve allows gas to flow out, but won't allow backflow of liquid into your gas system. Many manifolds and regulators already feature check valves, but this disconnect will keep liquid from ever entering your gas lines in the first place. Especially handy if you force carbonate your beer using the bev out dip tube!
Why we love it: Because we've had beer shoot back into our gas line and that sucks. At some point you will have a keg that is pressurized more than the pressure in your gas system. This could be caused by different carbonation levels, a keg sitting at room temperature, etc. So for example if the pressure in your keg is at 20 psi and your regulator is set at 12 psi, when you connect your gas in quick-disconnect liquid shoots from the keg into the gas line. Eliminate that possibility with this ingenious fitting.
If you're looking for a ball lock disconnect with a built-in check valve, we highly recommend KEG729. However, the beauty of this inline check valve is that it can be used with any flared disconnect, including pin locks. If you don't want to part with your high-quality stainless steel disconnects, this inline check valve is for you!
The highest quality plastic ball lock quick disconnect available to homebrewers
Twist-to-connect style pin lock QD for pin lock style corny kegs
Built-in flare washer—no need for a separate nylon washer that is required with stainless steel QDs
CMBecker is an international manufacturer of beverage dispensing solutions for both home and professional draft equipment
Black plastic clearly identifies the disconnect as the liquid out QD
Plastic quick disconnects for pin lock Cornelius-type kegs. This is a high quality fitting made by CM Becker in Germany. Red and black quick disconnects are used for the liquid out tank plug.
1/4" male flare (MFL) threaded fittings make it easy to connect a variety of hardware pieces and connectors. MFL fittings are more versatile than barbed fitting, but they must be tightened down properly or they can leak. Barbed fittings are also available.
This is the faucet adapter by itself. Use this faucet adapter to connect a draft faucet directly to a keg using a flare quick disconnect, KEG720 for ball lock or KEG760 for pin lock. Faucet, knob and quick disconnect are not included. Will not work with our creamer faucets, the vent-matics, flow control Intertap or flow control Perlick faucets (compatible with standard Intertap/Perlick faucets). Unit does come with faucet collar for mounting adapter to faucet. The faucet adapter is made from stainless steel. The outside collor is chrome plated brass.
The highest quality plastic ball lock quick disconnect available to homebrewers
Twist-to-connect style pin lock QD for pin lock style corny kegs
Built-in flare washer—no need for a separate nylon washer that is required with stainless steel QDs
CMBecker is an international manufacturer of beverage dispensing solutions for both home and professional draft equipment
Gray plastic clearly identifies the disconnect as the gas in QD
Plastic quick disconnects for pin lock Cornelius-type kegs. This is a high quality fitting made by CM Becker in Germany. Red and grey quick disconnects are used for the gas in tank plug.
1/4" male flare (MFL) threaded fittings make it easy to connect a variety of hardware pieces and connectors. MFL fittings are more versatile than barbed fitting, but they must be tightened down properly or they can leak. Barbed fittings are also available.
The highest quality plastic pin lock quick disconnect available to homebrewers
Twist-to-connect style pin lock QD for pin lock style corny kegs
1/4" barb for 1/4" or 3/16" ID draft line
CMBecker is an international manufacturer of beverage dispensing solutions for both home and professional draft equipment
Black plastic clearly identifies the disconnect as the liquid out QD
This is a high quality pin lock fitting made by CM Becker in Germany.
Pin lock plastic quick disconnects for Cornelius style homebrew kegs. These quick connect fittings will connect to the beverage out body connect on your pin lock kegs.
Barbed fittings for are the most popular style, they make it simple to connect keg tubing directly to the barb. Threaded flare fittings are also available.
The highest quality plastic ball lock quick disconnect available to homebrewers
Twist-to-connect style pin lock QD for pin lock style corny kegs
1/4" barb for 1/4" or 3/16" ID draft line
CMBecker is an international manufacturer of beverage dispensing solutions for both home and professional draft equipment
Gray plastic clearly identifies the disconnect as the gas in QD
This is a high quality fitting made by CM Becker in Germany.
Pin Lock Gas-In quick-disconnect is fitted with a barbed end for easy attachment of your gas line. Gray top and base denote that this unit is used on gas side. 2 pin. 1/4'' barb fitting for easy attachment of gas line.
A good brewer knows the importance of having the right tool for the job. They also know the importance of being able to disassemble their kegs for cleaning and rebuilding. This handy socket is a must-have if you own pin lock style kegs, so that you can easily remove gas and beverage body connects. 3/8" drive.
Complete assembly for conveniently serving beer out of a pin lock style keg. Commonly used to serve on the go because there is no beer lines to get in the way! Comes with QD faucet adapter, stainless faucet with stainless steel shank, faucet knob and Pin lock beverage out quick disconnect.
