An excellent, attractive upgrade to your Braumeister! This stainless steel domed hood helps trap heat to get your brew up to boiling faster, and promotes a more vigorous, rolling boil. The open top still allows for DMS to be blown off during the boil and can be connected to an exhaust pipe to carry steam out of your brew space. As an extra benefit, the dome can be fitted to the Braumeister upside down and used as a funnel to help when doughing in your malt. A real must-have! Compatible with all generations of Braumeister, made before or after 2015.

Read more less

Tired of using gravity or siphons to transfer wort from your Braumeister to your fermenter? This device uses the Braumeister's built in pump to move the wort, even if your Braumeister is below your fermenter! Features: Only works with 20 or 50 Liter Braumeisters Works with both standard and Braumeister Plus models Pumps wort to a fermenter even when placed higher than the Braumeister Includes stainless pipe, pump plug, valve, and about 5 ft. of silicone tubing

Read more less

Replacement Spigot for the 20 L and 50 L Braumeister all-grain brewing system.  Has 3/4 in. threads and can be used for the Speidel casks as well

Read more less

Genuine Speidel replacement part. This silicone gasket seals the bottom of the malt pipe to the Braumeister's floor, keeping your grain inside the malt pipe and out of the Braumeister's pump inlet. The gasket can become worn after many batches, it's always a good plan to have a spare on hand.

Read more less

This shortened malt pipe will enable our 50L Braumeister to brew 25L batches (from 10 gallons to 5 gallons). The way these Braumeisters function during the mashing stage, a smaller batch than 50L is usually not an option. By utilizing this shortened mash pipe, you can now brew either a 5 or 10 gallon batch with your 50L Braumeister!

Read more less

Produce even tastier beers with your Speidel Braumeister by limiting oxygen exposure during the brewing process. Exposure to oxygen in the brewing process can impact the flavor of the final beer and negatively affect the flavor retention and shelf life. This is especially crucial for lighter, malt-forward beers that have less hops, such as lagers, pilsners and wheat beers. With the Low Oxygen kit you can minimize oxygen exposure during mashing, cooling, and transferring to your fermenter. Make the malt character in your beers shine brighter and last longer! Accessory kit for Low Oxygen Brewing with the Braumeister 20 L Limits oxygen exposure during mashing (and cooling for BM-Plus users) The higher fixed filter plate allows for more malt -- up to about 15.5 lbs Includes swimming lid, support ring for filter plate and fixing nut

Read more less

This shortened malt pipe will enable our 20L Braumeister to brew 10L batches (from 5 gallons to 2.5 gallons). The way these Braumeisters function during the mashing stage, a smaller batch than 20L is usually not an option. By utilizing this shortened mash pipe, you can now brew either a 2.5 or 5 gallon batch with your 20L Braumeister!

Read more less

Genuine Speidel replacement part. This silicone gasket seals the bottom of the malt pipe to the Braumeister's floor, keeping your grain inside the malt pipe and out of the Braumeister's pump inlet. The gasket can become worn after many batches, it's always a good plan to have a spare on hand.

Read more less

Who doesn't like a faster brew day? Help your 50L Braumeister get up to strike temp and to a boil faster; and use less energy to maintain the boil with this neoprene sleeve from Speidel. Fits both new models as well as pre-2015 models.

Read more less

The original all-in-one brewery still made in Germany! 5" touchscreen is easy to use and guides you through the brewing process Brew all-grain beer inside your home—no gas burner needed Built-in cooling jacket eliminates the need for awkward wort chillers 2R interior stainless finish with electropolished heating coil The "Mercedes®" of brewing systems. When you want the best, this is it. Never ceasing to improve upon the original Braumeister design, Speidel has taken this unit a step further with the new 5" touch screen control panel. The new automatic control system brews with your custom recipes and guides you through the brewing process. Now with integrated WiFi and bluetooth as standard, recipes and software updates can be synced automatically. Speidel Braumeister continues to be the all-in-one brewing system for brewers that demand the highest quality. The Braumeister is the original all-in-one, electric all-grain brewing system. Designed and patented in Germany over a decade ago, it has since been copied around the world. Still made in Germany today by Speidel, a 5th generation German stainless steel manufacturer, the Braumeister is the Mercedes® of brewing systems. Speidel made a decision to not try and compete on price with the rest of the all-in-one machines that are made in China. They actually went the opposite direction improving upon the Braumeister many times. They've improved the control screen, added dimpled jackets to eliminate wort chillers, improved the programming and functionality, and created an online myspeidel.com control center along with multiple other small refinements. They also created a host of optional equipment to further enhance your brewing. If you appreciate really well-made equipment, the Braumeister is for you. It is the best of the best. The welded on dimpled jacket eliminates the need for a separate wort chiller and also opens the door for using the Braumeister as a temperature controlled fermenter—see the video below. These jackets have 1" male threading, and aside from cooling, a Dump Valve tap has been added to the base of the unit to make emptying and cleaning that much easier. Advantages of the Braumeister First, the system has a small footprint and is powered by electricity, allowing you to brew inside, in a confined space, without the inherent dangers of using an open flame. Secondly, this unit is very easy to use as you mash the grain and then boil the wort in the same vessel. We also love the automation and control. Before you brew you set the controller with the different temperatures you wish to attain (advice is given on what to set) and the built-in heating element and pump do the rest. The Braumeister is especially ideal for step-mashing, which many brewers think is the preferred way to brew lager beers. Based on the results of lagers we have brewed on this machine, MoreBeer! agrees. Unlike other brew systems that have the temp probe located at the bottom, the Braumeister's temperature sensor was installed inside the middle bar. This means that the temperature is measured directly in the malt and is even more accurate in combination with the new software adjustments. Walking Through the Brew Process On Brew Day, you are going to assemble your Braumeister with the mash tub and bottom screen. You will fill the unit with filtered water to a notch on the center post - easy. The water resistant touchscreen controller reads in °C or °F, and you can set it to different temperatures you wish to reach. Advice is given in the manual. When your water is the correct temperature, a beep alerts you to add grain. Stir in your grain, lock down the top screen (so now there is a screen on the bottom and the top) and start the mash. During the mash wort is constantly recirculated through the grain bed from the bottom up, reverse of most all-in-one systems. The liquid wort flows up through the mash and then cascades down between the mash tub and the outer wall of the Braumeister. There it is collected by the pump and pushed back through the mash. At any time, you can pause the pump from the controller screen. Speidel upgraded their pump to be detachable for easy cleaning and maintenance between batches. When the mash is complete, another beep will alert you to remove the entire mash tub, which sets on top of the Braumeister to drain for a period of time. At this point you can choose to rinse the mash with hot water or to just add water directly the wort. Push another button and the boil starts and will run for however long you program it. When the boil stops, begin chilling your wort. Features: Brew in the tightest of spaces, anywhere in your home with a small footprint of counter space Easy to handle brewing and cleaning, malt pipe slides up with little effort Patented malt pipe technology. Wort is internally pumped from the bottom to the top for effective and gentle recirculation. No pipes are awkwardly mounted to the side of the kettle Clean, contactless cooling by running cold water through the welded-on cooling jacket. No need for sanitizing and storing a separate immersion wort chiller The pump is accessible beneath the unit and can be detached for cleaning and maintenance Braumeister stays up-to-date with regular software updates via an integrated WiFi module myspeidel.com syncs with the digital controller on your Braumeister Enter a recipe in myspeidel.com, choose a recipe from the community of other users, or design a recipe in Beersmith and import it to myspeidel.com and it will come up automatically on your Braumeister's touchscreen controller Edit your recipe on the fly in the touchscreen controller and it will automatically update on myspeidel.com When the brew day is over, ferment your beer inside the Braumeister, using the cooling jacket to control the fermentation temp Technical Specifications for 50L Braumeister: These units require a 220-230V connection. You should plan on hiring an electrician to install the proper socket and to wire on the appropriate plug. Produces 53L of wort, which is about 50L of finished beer Controllers can store up to ten recipes for easy repeat brewing! 3,200-watt built-in heating capacity (2) 23-watt pumps 230V (protection at least 16 amp), 50-60Hz Max Grain Capacity: 26.5 lbs Max Fill Level: 55L (Upper Marking on Center Rod) 27.5" H x 19.7" Ø 53 lbs  

Read more less

If you like to use whole cone hops with your Braumeister this is a great way to prevent clogs and stop some of the larger pieces of hops from getting into your beer. This hop sieve is built for the Braumeister 20 and 50 liter systems and fits right over the outlet tap.

Read more less

Replacement Impeller for ITT/Lowara Pump in the 20 L and 50 L Braumeister.

Read more less

Replace lost or damaged foot protectors on the Braumeister systems

Read more less

Who doesn't like a faster brew day? This neoprene sleeve will help your 20L Braumeister get up to strike temp and to a boil faster, use less energy to maintain the boil.  

Read more less

Premium quality laser-welded 304 stainless steel closed tank  Made in Germany by Speidel and backed by a 25-year warranty Ideal for spirits and fermented beverages like wine, beer, cider, and kombucha. Ultra-smooth 2R interior finish allows for easy cleaning with cold water Outfitted with a 6-bar max cooling jacket for efficient glycol cooling 1.5” tri-clamp ports with two additional DIN ports for included thermometer/thermowell combo and sample valve The top lid provides a convenient opening for additions and the legs provide easy access to the bottom ports Vaulted complete drainage bottom for maximum product yield and easy cleaning We are proud to present these FD storage tanks made of premium quality 304 stainless steel. Built in Germany by Speidel and sold exclusively in the USA by MoreWine! Pro for over 20 years, the world-class traditions of German engineering and craftsmanship are reflected in these tanks. And, after examining tanks built by every major manufacturer worldwide, we can safely say that when it comes to features, quality, and price, these tanks represent the very best value available in stainless steel beer storage. Safely store small volumes of product in these beautiful tanks. The legs make accessing the ports easy and the convenient top hatch makes cleaning a dream when combined with the 2R interior finish. Heavy-duty sealing mechanism and gasket form a seal on top with a stainless steel lid equipped with a T.C. port for adding accessories or an airlock. The inside is finished to Speidel quality standards with flawless welds and a 2R finish.  The tanks will support a few PSI of pressure, however, they are not pressure-rated or designed to be used under pressure.  Tank Ports Tanks feature 1.5" T.C. outlets (1 on bottom for complete drainage, one in middle for racking arm, one on top for blowoff/airlock), and also two welded DIN fittings. One DIN port is equipped with an included sample valve and the other has an included thermometer and thermowell combination.  The cooling jackets have two 1” NPT ports. Speidel Quality Features Full Jacket - These tanks are equipped with a max cooling jacket rated to 6-bar. This will allow you to hook it into a glycol system for complete temperature control. Interior Finish - Speidel tanks feature an ultra-smooth 2R interior surface which allows you to clean your tanks with cold water, without scrubbing. This saves significant labor costs. Weld Quality - Speidel's robotic-arm laser welders create flawless stainless-to-stainless junctions that look and feel more like a taped fabric seam than a traditional weld. Ultra high-quality welds leave no chance for residual products to harbor spoilage organisms. Warranty - Speidel and MoreWine! Pro back up each and every tank with an industry-leading 25-year warranty against defects in materials or workmanship. Thickness - Speidel tanks are on average around 25% thicker than Italian-manufactured tanks of the same general capacity and dimensions. Complete Drainage Bottoms - These tanks are outfitted with vaulted bottoms for total drainage, which maximizes product yield at racking and makes cleaning a snap.  Tank Features: Full Volume of 240 L (63.4 gal) Perfect for blending two barrels of wine 1.5" T.C. Drain, Racking Port, and Lid outlet 8.5" Top hatch for easy cleaning and additions 2 X DIN10 Fittings w/ Sample Valve and Thermowell/Thermometer combo 2 x 1" NPT Ports on the jacket Tank Dimensions: 550mm D x 1524mm H (21.6" D x 60" H)

Read more less

This is a replacement temperature probe for 20 l and 50 l Speidel Braumeisters.  Please Note, this is for units produced after July of 2011.

Read more less

If you own the 50L Braumeister, then we already know you're a brewer that appreciates quality German craftsmanship. The rolling base accessory is no different. Molded to perfection from high-quality, easy-to-clean polyethylene, the base glides smoothly around your brewing area on casters with locking breaks. Perfect for moving your Braumeister unit to one area for brewing and pushing it to another area for cleaning and storage. A small reservoir is molded into the base, so it will collect spills and drips until you can move the unit closer to a drain and unplug the reservoir.  Features: Flexible costers with locking brakes Perfect height for mashing, lautering, and cleaning More clearance under the Braumeister for better access to the pump For transferring the wort to the fermenter, we recommend the Wort Pump accessory Drip pan function for catching boiled over wort or cleaning water Molded-in reservoir for retaining water until you're near a drain 3/4" female threaded outlet for mounting a valve if desired (not included) Base is made and molded out of high-quality, easy-to-clean polyethylene 15.11" H x 25.27" Ø  

Read more less

The Braumeister by Speidel is an amazing brewing system, allowing all-grain electric brewing in a compact, all-in-one design.  Now, the Braumeister can provide an even more ideal brew day, by controlling the entire brew process from your Windows 7 or higher device!  The Braumeister Mobile Wifi Unit is a modular internet connectivity device from Speidel, displaying temperatures and  times, running all aspects of the system, as well as updating firmware as released! Supervises the brewing process within the wireless local area network via a wireless internet router Updates the Braumeister control system to the latest software (firmware) Works with all 10L to 500L Braumeisters with a 2015 control unit or later Network standard: IEEE 802.11 b/g/n Requires PC with at least windows 7 or higher Please Note: This unit will only function on Speidel Braumeisters with Generation 2 Black Controllers (2015+). 

Read more less

The original all-in-one brewery still made in Germany! 5" touchscreen is easy to use and guides you through the brewing process Brew all-grain beer inside your home—no gas burner needed Built-in cooling jacket eliminates the need for awkward wort chillers 2R interior stainless finish with electropolished heating coil The "Mercedes®" of brewing systems. When you want the best, this is it. Never ceasing to improve upon the original Braumeister design, Speidel has taken this unit a step further with the new 5" touch screen control panel. The new automatic control system brews with your custom recipes and guides you through the brewing process. Now with integrated WiFi and bluetooth as standard, recipes and software updates can be synced automatically. Speidel Braumeister continues to be the all-in-one brewing system for brewers that demand the highest quality. The Braumeister is the original all-in-one, electric all-grain brewing system. Designed and patented in Germany over a decade ago, it has since been copied around the world. Still made in Germany today by Speidel, a 5th generation German stainless steel manufacturer, the Braumeister is the Mercedes® of brewing systems. Speidel made a decision to not try and compete on price with the rest of the all-in-one machines that are made in China. They actually went the opposite direction improving upon the Braumeister many times. They've improved the control screen, added dimpled jackets to eliminate wort chillers, improved the programming and functionality, and created an online myspeidel.com control center along with multiple other small refinements. They also created a host of optional equipment to further enhance your brewing. If you appreciate really well-made equipment, the Braumeister is for you. It is the best of the best. The welded on dimpled jacket eliminates the need for a separate wort chiller and also opens the door for using the Braumeister as a temperature controlled fermenter—see the video below. These jackets have 1" male threading, and aside from cooling, a Dump Valve tap has been added to the base of the unit to make emptying and cleaning that much easier. Advantages of the Braumeister First, the system has a small footprint and is powered by electricity, allowing you to brew inside, in a confined space, without the inherent dangers of using an open flame. Secondly, this unit is very easy to use as you mash the grain and then boil the wort in the same vessel. We also love the automation and control. Before you brew you set the controller with the different temperatures you wish to attain (advice is given on what to set) and the built-in heating element and pump do the rest. The Braumeister is especially ideal for step-mashing, which many brewers think is the preferred way to brew lager beers. Based on the results of lagers we have brewed on this machine, MoreBeer! agrees. Unlike other brew systems that have the temp probe located at the bottom, the Braumeister's temperature sensor was installed inside the middle bar. This means that the temperature is measured directly in the malt and is even more accurate in combination with the new software adjustments. Walking Through the Brew Process On Brew Day, you are going to assemble your Braumeister with the mash tub and bottom screen. You will fill the unit with filtered water to a notch on the center post - easy. The water resistant touchscreen controller reads in °C or °F, and you can set it to different temperatures you wish to reach. Advice is given in the manual. When your water is the correct temperature, a beep alerts you to add grain. Stir in your grain, lock down the top screen (so now there is a screen on the bottom and the top) and start the mash. During the mash wort is constantly recirculated through the grain bed from the bottom up, reverse of most all-in-one systems. The liquid wort flows up through the mash and then cascades down between the mash tub and the outer wall of the Braumeister. There it is collected by the pump and pushed back through the mash. At any time, you can pause the pump from the controller screen. Speidel upgraded their pump to be detachable for easy cleaning and maintenance between batches. When the mash is complete, another beep will alert you to remove the entire mash tub, which sets on top of the Braumeister to drain for a period of time. At this point you can choose to rinse the mash with hot water or to just add water directly the wort. Push another button and the boil starts and will run for however long you program it. When the boil stops, begin chilling your wort. Features: Brew in the tightest of spaces, anywhere in your home with a small footprint of counter space Easy to handle brewing and cleaning, malt pipe slides up with little effort Patented malt pipe technology. Wort is internally pumped from the bottom to the top for effective and gentle recirculation. No pipes are awkwardly mounted to the side of the kettle Clean, contactless cooling by running cold water through the welded-on cooling jacket. No need for sanitizing and storing a separate immersion wort chiller The pump is accessible beneath the unit and can be detached for cleaning and maintenance Braumeister stays up-to-date with regular software updates via an integrated WiFi module myspeidel.com syncs with the digital controller on your Braumeister Enter a recipe in myspeidel.com, choose a recipe from the community of other users, or design a recipe in Beersmith and import it to myspeidel.com and it will come up automatically on your Braumeister's touchscreen controller Edit your recipe on the fly in the touchscreen controller and it will automatically update on myspeidel.com When the brew day is over, ferment your beer inside the Braumeister, using the cooling jacket to control the fermentation temp Technical Specifications for 10L Braumeister: 110V - comes with a NEMA 5-20 plug. You may need to install the corresponding wall socket or use an adapter. Produces 10L of wort, which is about 8.5L of finished beer Controllers can store up to ten recipes for easy repeat brewing! 1,200-watt built-in heating capacity 9-watt pump 110V, 50-60Hz, 15A Max Grain Capacity: 6.2 lbs Max Fill Level: 12L (Upper Marking on Center Rod) 19" H x 11.8" Ø 22 lbs  

Read more less

Genuine Speidel replacement part. This silicone gasket seals the bottom of the malt pipe to the Braumeister's floor, keeping your grain inside the malt pipe and out of the Braumeister's pump inlet. The gasket can become worn after many batches, it's always a good plan to have a spare on hand.

Read more less

If you own the 20L Braumeister, then we already know you're a brewer that appreciates quality German craftsmanship. The rolling base accessory is no different. Molded to perfection from high-quality, easy-to-clean polyethylene, the base glides smoothly around your brewing area on casters with locking breaks. Perfect for moving your Braumeister unit to one area for brewing and pushing it to another area for cleaning and storage. A small reservoir is molded into the base, so it will collect spills and drips until you can move the unit closer to a drain and unplug the reservoir.  Features: Flexible costers with locking brakes Perfect height for mashing, lautering, and cleaning More clearance under the Braumeister for better access to the pump For transferring the wort to the fermenter, we recommend the Wort Pump accessory Drip pan function for catching boiled over wort or cleaning water Molded-in reservoir for retaining water until you're near a drain 3/4" female threaded outlet for mounting a valve if desired (not included) Base is made and molded out of high-quality, easy-to-clean polyethylene 17.71" H x 22.44" Ø

Read more less

Conveniently move your fermentation tanks / eggs around your facility with this Molded Rolling Base.  This unit is designed to work with Speidel 240 l Tanks (BRAU710) as well as the 250 l Fermentegg (FE760).  High quality casters allow for easy relocation of tank as necessary for cleaning / general brewery work. Adds a bit over 6.25 inches to the height of your vessel.

Read more less

Who doesn't like a faster brew day? Help your 50L Braumeister get up to strike temp and to a boil faster; and use less energy to maintain the boil with this neoprene sleeve from Speidel. Fits both new models as well as pre-2015 models.

Read more less

This is the replacement mesh screen used in the malt pipe of the 500L Braumeister. This is not the stainless screen, and is only (1) nylon mesh screen.

Read more less

Replacement malt pipe for the 20 L Braumeister

Read more less

The original all-in-one brewery still made in Germany! 5" touchscreen is easy to use and guides you through the brewing process Brew all-grain beer inside your home—no gas burner needed Built-in cooling jacket eliminates the need for awkward wort chillers 2R interior stainless finish with electropolished heating coil The "Mercedes®" of brewing systems. When you want the best, this is it. The Braumeister: A patented, electric, self-contained all-grain brewing system producing 61 gallons of wort per brew. The beauty of the Speidel Braumeister is in simplicity and small footprint. This product is not part of our free shipping policy, however we only charge actual freight from our California or Pennsylvania Warehouse to your location. Touchscreen Control Panel The new automatic control system brews with your own individual recipes and guides you through the brewing process. Recipes and software updates can be synced automatically with the integrated WiFi. The time and temperature are precisely maintained through all brewing phases. The new touchscreen makes it even easier to operate the Braumeister. In addition, the large Braumeisters have integrated a new pressure sensor-controlled pump control. The pressure sensor in the pressure line which is connected with the malt pipe allows you to regulate the pump speed via the pressure. The new timer function saves time because, for example, the brewing water can be heated up early in the morning. One Vessel With the Braumeister you Mash, Boil and Cool all in the same vessel. All actions are controlled by the included electronic control system. Your brewing process is started in the Braumeister the same as with any other system, by mixing cracked grain with hot water. From there traditional step mashes at multiple temperatures are easy to maintain when you set your program on the controller. Traditional Sparging Optional Because of the constant movement of wort, the high ratio of liquid in the mash and the unique grain bed filters, the efficiency of removing sugar from the mash is good. This eliminates the need for a traditional sparge. However, when you shift from Mashing to the boil by lifting the grain bed out of the tank you can rinse the grain with hot water, performing a more traditional sparge if desired. Boil and Cool After the grain basket is removed with the included winch you will begin a traditional boil for 60 to 90 minutes. After the boil is over you connect to your glycol system (see our Kreyer Chilly45 GLY411) and use the built-in dimpled cooling jacket to cool the wort down. Simple. Product Specifications: 208V Three Phase Power Built in frequency converter allows it to run on 50 or 60hz Designed to make approximately 61 gallons of wort, 52 gallons finished beer. Dimensions: 54" W x 34" D x 79" T heating spiral: 3 x 3000 Watt heating capacity 370 Watt pump 92.59 lb max qty of malt One year warranty Control Software: Brewing guide—also shows quantity and kind of raw materials Precise temperature measuring Pump pauses are adjustable Integrated WiFi for software updates and sync of recipes with MySpeidel Integrated database of raw materials Timer function with delayed start Ferment control compatible with the Tilt Hydrometer Control Hardware: IP 65 water resistant 5" touchscreen Additional connections 24V and CAN for future accessories WiFi and Bluetooth integrated  

Read more less

Help retain heat with Speidel's insulating jacket for the 200L Braumeister.

Read more less