Easily take your beer anywhere while keeping it protected from UV! Each case contains 207 cans and lids which is enough for about 25 gallons of beer Compatible with the Cannular Can Seamers (CAN100 / CAN110) BPA free liner Aluminum cans offer 100% protection from UV and other wavelengths of light that are harmful to beer. There's still great debate surrounding whether cans or bottles are better at keeping beer fresh, but if done correctly, cans are theoretically the superior option. When a crown cap is crimped onto a bottle, the lining of the cap can form an imperfect seal on the bottle, allowing small amounts of oxygen in, as well as small amounts of CO2 out. Over time this can result in oxidation of the beer and lost carbonation. Seamed cans form a much better seal, which can prevent these issues. Aside from better protection, aluminum cans are undoubtedly the safest option for sharing and enjoying your homebrew. Bring your canned creations tailgating, camping, boating, or crack a few open poolside without the worry of broken glass! 500ml/16.9 oz aluminum cans Each case contains 207 cans and lids 202 end diameter beverage cans with B64 lids One case is enough for roughly five 5-gallon batches of beer Compatible with the Cannular Can Seamers (CAN100 / CAN110) BPA free liner Please note that empty aluminum cans are very delicate, and up to 5% of the cans are likely to be dented or damaged in transit. If the cans were packed in a more protective (more expensive) cardboard box, the cost per can would be more expensive than simply having some dented/sacrificial cans arrive. NOTE: Due to the size of this item, it is not eligible for international shipping.   Kegland Part number: KL05449

Read more less

Easily take your beer anywhere while keeping it protected from UV! Each case contains 300 cans and lids which is enough for about 25 gallons of beer Compatible with the Cannular Can Seamer when used with 330ml table spacer (CAN103) BPA free liner Aluminum cans offer 100% protection from UV and other wavelengths of light that are harmful to beer. There's still great debate surrounding whether cans or bottles are better at keeping beer fresh, but if done correctly, cans are theoretically the superior option. When a crown cap is crimped onto a bottle, the lining of the cap can form an imperfect seal on the bottle, allowing small amounts of oxygen in, as well as small amounts of CO2 out. Over time this can result in oxidation of the beer and lost carbonation. Seamed cans form a much better seal, which can prevent these issues Aside from better protection, aluminum cans are undoubtedly the safest option for sharing and enjoying your homebrew. Bring your canned creations tailgating, camping, boating, or crack a few open poolside without the worry of broken glass! To use these cans with the Cannular Can Seamer you will also need the CAN103 table spacer. 330ml/11.1 oz aluminum cans Each case contains 300 cans and lids 202 end diameter beverage cans with B64 lids One case is enough for roughly five 5-gallon batches of beer Compatible with the Cannular Can Seamer when used with 330ml table spacer (CAN103) BPA free liner Please note that empty aluminum cans are very delicate, and up to 5% of the cans are likely to be dented or damaged in transit. If the cans were packed in a more protective (more expensive) cardboard box, the cost per can would be more expensive than simply having some dented/sacrificial cans arrive.   Kegland Part number: KL13093

Read more less

The Cannular Pro is a semi-automatic can seamer that is easy to use, reliable, and beautifully simple. Whether you're a brewery looking to offer canned beer to go or a homebrewer wanting to keep your creations fresh and fully protected from light, the Cannular is the answer. This bench top unit is one of the most compact and easy to use can seamers you'll find. The Cannular only requires one person to operate, and each can takes roughly 3 seconds to seam. With a two-person team, one filling and one seaming, the Cannular becomes a suitable option for nano breweries doing small canning production runs. Cannular Pro vs. Manual Unit This new Semi-Auto Pro model will guarantee you get a consistent seaming process every time. Unlike the less expensive manual can seamer, this machine has no lever for the seaming operation, meaning it's even easier for the operator to seam the can consistently and will not vary on how hard the operator is pulling the lever.  Another major difference is that the Cannular Pro's table spacer is specially designed to work with all standard 202 cans, including the industry favorite 16 oz (473ml) and 12 oz (355 ml) cans, as well as our 500ml (16.9 oz) and 330ml (11.2 oz) Can Fresh Aluminum Cans. Unlike the manual model that requires a secondary table spacer for use with 330ml cans, the Pro model features an adjustable platform, allowing you to raise or lower the table spacer depending on what size can you're seaming. It is necessary to adjust the table height to ensure you have the appropriate amount of pressure applied when the can lift is raised. The Cannular Pro can be adapted for use with 32 oz Crowlers (Ball 300 can/end). To seam Ball 300 end/lid type oversized aluminium cans you will need to purchase the required Chuck for 1L (32 oz) Crowlers separately (coming soon). The Cannular Pro can also be adapted for use with Tin Plated Steel Cans for food packaging applications. The table spacer is designed to accept these 100mm cans, but you will need to purchase the required 100mm Chuck separately. Operation: The beauty of the Cannular lies in how truly simple it is to operate, and the semi-automatic pro model makes canning beer even easier. With only three points of operation, it only takes a few minutes to familiarize yourself with the machine. The seaming process is as follows: Place lid atop the can and place the can on the table spacer Turn the platform lever clockwise to raise the can to the seamer Press the seaming operation button then wait for the can to stop spinning Turn the platform lever counterclockwise to lower the can That's all there is to it! Construction: The Cannular was designed to be compact, durable, and safe to operate in a wet environment. The platform assembly is made from 304 grade stainless steel, so no matter how messy your canning gets, there's no need to worry about rusting or degradation. The body of the unit is made from hammered sheet metal and fastened together with stainless steel screws. Rubber feet help keep the unit from slipping and sliding while in use. In addition, the Cannular features built-in brackets near the feet so you have the option to mount the machine to your counter or benchtop. The Cannular runs off of 24V DC power via the Anderson socket located on the back. This lower voltage was chosen specifically to make the unit as safe to use in a wet environment as possible.   Power: As noted above, the Cannular comes with a 24V DC Anderson socket located on the back of the unit. It does not, however, include a cord and plug. This unit uses the more powerful Pro Model Power Supply, which provides enough power to seam tin plated steel cans as well as aluminum cans.   Why Cans? So why can when you can bottle? There's no doubt that canning has become a more and more popular format for packaging beer among craft breweries over the last several years, and with good reason. Aluminum cans aren't just more environmentally friendly than bottles, since cans require less energy to transport and recycle, they're also much better at protecting the quality of the beer. Whereas bottles allow in light, which leads to skunking, aluminum cans offer 100% protection from UV and other wavelengths of light that are harmful to beer. There's still great debate surrounding whether cans or bottles are better at keeping beer fresh, but if done correctly, cans are theoretically the superior option. When a crown cap is crimped onto a bottle, the lining of the cap can form an imperfect seal on the bottle, allowing small amounts of oxygen in, as well as small amounts of CO2 out. Over time this can result in oxidation of the beer and lost carbonation. Seamed cans, on the other hand, form a much better seal that can prevent these issues. Of course, it's important to make sure that the can is purged of oxygen before being filled, and that the can lid is sealed atop foam to eliminate oxygen from the headspace. Aside from all the "sciency stuff", cans are just plain safer. Take your beer backpacking, camping, or poolside and rest assured that broken glass won't ruin your day!   Specifications: Power: 250W 24V DC Rated Speed: 3300 RPM Gearbox Ratio: 9.8 : 1 Dimensions: 16" L x 9.5" W x 21" H Weight: 40 lbs Splash guard not included Max Can Height: 7.75" (197mm) Please note the pictured splash guard is not included with the seamer. Please see CAN106 to add the splash guard to your order. Please note: When you receive your cannular the rollers have been set and tested at the factory. They should not need adjustment for 100,000 cans when using only Can Fresh brand cans. We recommend testing at least 4 cans to verify the calibration. The table, however, comes unadjusted and getting it set up correctly is very important to getting a proper seal. Cannular's test show that a minimum 0.4mm (.015") actual overlap is needed to seal to 90 PSI. The proper table tension takes a little practice and expect to waste a few cans getting it dialed in. Once you learn the proper tension re-adjusting it is very quick and easy. You want the tension to be tight but not so tight as to dent the can. Use cans at your fill height with water for proper tension adjustment. Kegland Part number: KL15769

Read more less

Everything you need to start seaming 32 oz Crowlers with the Cannular Pro can seamer. This kit includes the Cannular Pro Semi-Auto Canning Machine, 110V Power Supply, Splash Guard Accessory, and Crowler Chuck Adapter. The Cannular Pro is a semi-automatic can seamer that is easy to use, reliable, and beautifully simple. Please note: the Cannular comes ready for sealing 12 oz and 16 oz cans as standard. The Crowler Chuck Adapter must be installed before seaming 32 oz Crowlers (Ball 300 can/end). Whether you're a brewery looking to offer canned beer to go or a homebrewer wanting to keep your creations fresh and fully protected from light, the Cannular is the answer. This bench top unit is one of the most compact and easy to use can seamers you'll find. The Cannular only requires one person to operate, and each can takes roughly 3 seconds to seam. With a two-person team, one filling and one seaming, the Cannular becomes a suitable option for nano breweries doing small canning production runs. The Cannular Pro's table spacer is specially designed to work with all standard 202 cans, including the industry favorite 16 oz (473ml) and 12 oz (355 ml) cans, as well as our 500ml (16.9 oz) and 330ml (11.2 oz) Can Fresh Aluminum Cans. Unlike the manual model that requires a secondary table spacer for use with 330ml cans, the Pro model features an adjustable platform, allowing you to raise or lower the table spacer depending on what size can you're seaming. It is necessary to adjust the table height to ensure you have the appropriate amount of pressure applied when the can lift is raised. Operation: The beauty of the Cannular lies in how truly simple it is to operate, and the semi-automatic pro model makes canning beer even easier. With only three points of operation, it only takes a few minutes to familiarize yourself with the machine. The seaming process is as follows: Place lid atop the can and place the can on the table spacer Turn the platform lever clockwise to raise the can to the seamer Press the seaming operation button then wait for the can to stop spinning Turn the platform lever counterclockwise to lower the can That's all there is to it! Construction: The Cannular was designed to be compact, durable, and safe to operate in a wet environment. The platform assembly is made from 304 grade stainless steel, so no matter how messy your canning gets, there's no need to worry about rusting or degradation. The body of the unit is made from hammered sheet metal and fastened together with stainless steel screws. Rubber feet help keep the unit from slipping and sliding while in use. In addition, the Cannular features built-in brackets near the feet so you have the option to mount the machine to your counter or benchtop. The Cannular runs off of 24V DC power via the Anderson socket located on the back. This lower voltage was chosen specifically to make the unit as safe to use in a wet environment as possible. Kit Includes: Cannular Pro Can Seamer 110V Power Supply Splash Guard Crowler Chuck Adapter Cannular Pro Specifications: Power: 250W 24V DC Rated Speed: 3300 RPM Gearbox Ratio: 9.8 : 1 Dimensions: 16" L x 9.5" W x 21" H Weight: 40 lbs   Please note: When you receive your cannular the rollers have been set and tested at the factory. They should not need adjustment for 100,000 cans. The table, however, comes unadjusted and getting it set up correctly is very important to getting a proper seal. Cannular's test show that a .4mm (.015") actual overlap is all that is needed to seal to 90 PSI. The proper table tension takes a little practice and expect to waste a few cans getting it dialed in. Once you learn the proper tension re-adjusting it is very quick and easy. You want the tension to be tight but not so tight as to dent the can. Use cans at your fill height with water for proper tension adjustment.

Read more less

Take your beer on the go and leave the glass at home! These large 32 oz crowlers are a great replacement for heavy, fragile glass growlers. Fully compatible with the Cannular Pro Can Seamer when used with the Chuck Adapter for Ball 300 Ends. Aluminum cans offer 100% protection from UV and other wavelengths of light that are harmful to beer. There's still great debate surrounding whether cans or bottles are better at keeping beer fresh, but if done correctly, cans are theoretically the superior option. When a crown cap is crimped onto a bottle, the lining of the cap can form an imperfect seal on the bottle, allowing small amounts of oxygen in, as well as small amounts of CO2 out. Over time this can result in oxidation of the beer and lost carbonation. Seamed cans form a much better seal, which can prevent these issues Aside from better protection, aluminum cans are undoubtedly the safest option for sharing and enjoying your homebrew. Bring your canned creations tailgating, camping, boating, or crack a few open poolside without the worry of broken glass! To use these cans with the Cannular Pro Can Seamer you will also need the CAN112 chuck adapter. 32 oz / 946 mL aluminum crowlers Each case contains 149 cans and lids 300/307 x 710 Crowler One case is enough for roughly seven 5-gallon batches of beer Compatible with the Cannular Pro Can Seamer when used with Ball 300 Chuck Adapter (CAN112) Water-based polymer interior coating Please note that empty aluminum cans are very delicate, and up to 5% of the cans are likely to be dented or damaged in transit. If the cans were packed in a more protective (more expensive) cardboard box, the cost per can would be more expensive than simply having some dented/sacrificial cans arrive.    

Read more less

Easily take your canned creations on the go with these recycled HDPE can carriers. You're probably already familiar with these carriers from bringing home 16 oz can 4-packs from the local brewery or bottle shop. Beer cans snap in and out effortlessly and stack neatly inside the fridge. Fully compatible with our 16.9 and 11.1 oz Can Fresh Aluminum Cans. Made from 100% post-consumer recycled milk jugs and 100% recyclable. 4-Pack Can Carrier Available in Black, White, and Red Made from recycled resin Molded in the USA

Read more less

Due to high demand, the case quantity is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory.   Easily take your canned creations on the go with these recycled HDPE can carriers. You're probably already familiar with these carriers from bringing home 16 oz can 4-packs from the local brewery or bottle shop. Beer cans snap in and out effortlessly and stack neatly inside the fridge. Fully compatible with our 16.9 and 11.1 oz Can Fresh Aluminum Cans. Made from 100% post-consumer recycled milk jugs and 100% recyclable. 6-Pack Can Carrier Available in Black, White, and Red Made from recycled resin Molded in the USA

Read more less

Package 15 x 16oz cans per minute Hardened chuck for extreme durability and extended lifespan Small footprint – roughly the same size as a pallet space Easy to wash down and clean between uses Suitable for breweries up to 40bbl The Cannular brand launched the manual can seaming machine at the start of 2019 with the world's first bench-top canning machine that was affordable and accessible to home brewers worldwide.  It gave home brewers and craft brewers the ability to get into small scale canning while still maintaining very low DO, seam tightness and lock in beverage quality. Since then, the Cannular canning machines have become the world's most popular canning machines ever manufactured, selling worldwide in America, Europe, UK, New Zealand and Australia.  On the back of this success KegLand then has further built the Cannular brand name to deliver a Semi-Auto canning machine and now is delighted to bring out the Cannular Full Auto Single Lane Canning Line. In essence with the whole Cannular range it depends on fundamentally simple processes and when combined with modern engineering provides an elegantly simple solution to small scale packaging.  The Cannular Fully Auto Single Lane Packaging Line will suit a small to medium sized brewery doing batches from 10bbl and up to 40bbl. Compact Size The compact footprint means this canning line is almost the size of a standard pallet so it can be stowed into pallet racking or wheeled out of the way easily. Hardened Chuck The chucks on this machine are made from Cr12MoV which is then coated with Titanium.  This grade has superior hardness so it can last an extremely long time without needing to re-tune the machine or change the chuck.  The hardness is 58-62 dH.  If you are particularly concerned about corrosion of the chuck, KegLand can also custom make stainless steel chucks on request.  For stainless steel chucks they can use the Quench Polish Quench process to harden the stainless steel.  It should be noted that the stainless chuck is more expensive and is less hard than the Cr12MoV alloy and as a result we do not normally recommend this alternative but it can be manufactured if requested. Setup and Washdown As the machine is fairly compact the wash down is extremely simple. The whole operating deck can be washed down with a hose and the chassis is mounted with an oversized drip tray to catch stray drips from the filling process.  The deck can also be plumbed to drain so cleaning in place (CIP) can be implemented.  All wet areas are made from nylon, Teflon and 304 stainless steel. Maintenance Made with European pneumatics, electronic controllers, flow sensors and industrial grade PLC you can be confident that all components are built to last the distance and designed to handle millions of cans before requiring an overhaul. We recommend that tolerances are checked on the rolls and chuck every 100,000 cans and lubricate some of the pneumatics.  Fortunately, all spare parts are supplied by KegLand so you know you're not going to get the shaft on replacement parts in the unlikely instance that you need them.  No major overhauls will be required until well over 1 million cans have gone through this machine and even when that time comes the maintenance procedures are relatively straight forward. Significant CPM for the Footprint This canning line is able to package 15 cans per minute making this the highest output machine ever manufactured within this small footprint. Low Labor Cost As this machine is relatively simple to run, one operator can load cans and lids into the respective hoppers and also package cans from the output of the machine.  Larger more complicated machines often require several operators to run, making this labor efficient for such a small machine size. Specifications: 120V Supplied as standard with a B64 chuck that suits standard 202 can bodies Height and Width are easily adjustable for a variety of cans Min. Can Height: 3.93" (100mm) Max. Can Height: 7.28" (185mm) Dimensions: 38" x 28" x 69" Shipping Crate Dimensions: 42" x 33" x 76" Shipping Weight: 453 lbs KegLand Part Number: KL24457  

Read more less

32 oz crowler cans and ends. Pallet contains 2,400 units. 300/307 x 710 Crowler.  

Read more less