Replacement 1.5" T.C. carbonation stone for MB conical fermenters and brite tanks.
Specifications:
2 micron
Overall Length: 17.7"
Stone Length: 9.8"
Single-piece design
Made from Titanium
Please Note: As the stone is made from titanium, it is intended for carbonation only and should not be used for oxygenation. Use with oxygen can make the titanium become brittle and prone to cracking.
Sanitary sample valve ideal for active fermentations as it has no pockets to trap fermenting wort
Easy twist-to-open handle is much easier to operate than standard plunger style sample valves
Disassembles quickly for cleaning between uses
Direct replacement for MB conical fermenters & brite tanks and compatible with any fermenter with 1.5" T.C. port
Nozzle mount for use with a pigtail sample coil to pour samples of carbonated beer
Look no further, this is a perfectly engineered 1.5" TC sample valve! With an easy twist to open handle and quick diassembly, this valve provides ease and convenience. Can be used on any fermenters 1.5" TC port.
This 304 stainless steel valve is perfect for active fermentations. It has no pockets to trap fermenting wort. It is very easy to disassemble and clean. It features a mount for a pigtail or a CO2 checker.
This is the recommended replacement sample valve for MB conical fermenters and brite tanks.
Single station manual keg filler assembly makes a simple solution for small volume keg filling runs
Reinforced silicone tubing on the beer-out side offers more protection when cleaning and sanitizing the system with hot solution
Clear vinyl on the gas-out side operates as a sight glass to let you know what's happening in the keg
Easily fill Sanke kegs with the MB Keg Filler. Simply connect to your brite tank and purge with beer. The high-quality stainless steel keg couplers have had the check valves removed so beer and CO2 can flow backwards when needed. Reinforced silicone tubing on the beer-out side offers more protection when cleaning and sanitizing the system with hot solution. Clear vinyl on the gas-out side operates as a sight glass to let you know what's happening in the keg—foam in the tubing indicates you're filling too quickly, while beer in the tubing indicates the keg is full.
Stainless Steel D-style sanke couplers
Reinforced silicone tubing on beer side
Clear vinyl tubing on gas side
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this item to you when we receive more in mid February.
2" tri-clamp pressure relief valve. Calibrated to blow off at 2 BAR or 29 PSI.
This is the modern copy of the old 1/4" Turn Valves (Zwickle). It has a ledge to attach a pigtail or a CO2 checker. The valve is designed to clean in place as long as the valve remains open for the cleaning cycle.
Note: The valve has a small pocket in the moving part that traps wort when closed so we don't recomend these for active fermentations.
This is a replacement option for the sample valve for MB conical fermenters and brite tanks.
Made from a brand new 15.5 gal. keg with a 4" tri-clamp opening
1" yeast piping for easily moving dense yeast
Includes two 1.5" tri-clamp butterfly valves at the inlet and outlet
Adjustable PRV for lowering pressure for long term storage
15.5 gal size, perfect for up to 10 bbl batches
The MoreBeer! Pro Yeast Brink is made with pro brewers in mind brewing up to 10 barrel batches. The yeast piping gives you a 1" passage to the bottom of a keg to make moving even the thickest yeasts a breeze. There is an adjustable PRV in case you need to lower the pressure for long term storage. The yeast piping is welded into the keg 4" TC keg lid, making for quick and easy inspecting and cleaning. The dip tube is about an inch from the bottom of the keg to help keep non-yeast solids that separate out from transferring with your repitch.
1/2 bbl is perfect for up to a 10 bbl batch with most yeasts. Also available in 1/4 bbl size for up to 5 bbl batches and 1 bbl size for up to 20 bbl batches.
Pro tip: If you align one valve handle 90 degrees to the other you won't forget which side is IN or OUT. If you do forget, with the PRV on the back side, the left side is the IN and the right side is the OUT.
Replacement cup gasket is for the ForgeFit® Sanitary Sample Valve.
This is the recommended replacement part for the sample valve on MB conical fermenters and brite tanks.
Material: EPDM
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory.
Make quick work of transferring finished beer from fermenter to kegs with the easy-to-operate four station manual keg filler
Optional Keg Filling FOBs stop flow automatically once the keg is full, eliminating waste and making it even easier for a single person to operate the filler
Sight glass at the inlet allows you to monitor beer flow from the fermenter—check if you're pulling yeast or breaking CO2 out of solution
Elevated sample port for purging air from the system before filling runs
Made from high-quality Stainless Steel tri-clamp fittings, custom-welded stand, and reinforced silicone tubing
Shorten the time it takes to do your least favorite task with the MB Keg Filler. Our Keg Filler was designed by renowned brewmaster Colin Kaminski to make filling kegs a simple process that can be completed quickly. Connect your tank to the keg filler via the 1.5" butterfly valve inlet, which will enable you to shut off flow if you run into any issues. Monitor flow with the sight glass to see if you're pulling yeast, if there's air present in the system, or if CO2 is breaking out of solution because you're filling too quickly. The highest point in the filler is a plunger-style sample valve sitting at the opposite end, allowing you purge air out of the system and minimize oxidation. The high-quality stainless steel keg couplers have had the check valves removed so beer and CO2 can flow backwards when needed. Reinforced silicone tubing on the beer-out side offers more protection when cleaning and sanitizing the system with hot solution. Clear vinyl on the gas-out side operates as a sight glass to let you know what's happening in the keg—foam in the tubing indicates you're filling too quickly, while beer in the tubing indicates the keg is full.
The Manual Keg Filler is available with or without a Keg Filler FOB on each filling line. See the instructions below for operating the keg filling FOBs.
4-Head Keg Filling Station
Stainless Steel D-style sanke couplers
Reinforced silicone tubing on beer side
Clear vinyl tubing on gas side
Custom-welded compact stainless steel stand
Butterfly valves have the distinct advantage over ball valves in that they won't trap wort inside. They are the most sanitary valve you can ask for and are easy to clean in place. 2" tri-clamp.
These valves are a direct replacement of the butteryfly valves that come on MB conical fermenters and brite tanks.
Made from a brand new 7.75 gal. keg with a 4" tri-clamp opening
1" yeast piping for easily moving dense yeast
Includes two 1.5" tri-clamp butterfly valves at the inlet and outlet
Adjustable PRV for lowering pressure for long term storage
7.75 gal size, perfect for up to 5 bbl batches
The MoreBeer! Pro Yeast Brink is made with pro brewers in mind brewing up to 5 barrel batches. The yeast piping gives you a 1" passage to the bottom of a keg to make moving even the thickest yeasts a breeze. There is an adjustable PRV in case you need to lower the pressure for long term storage. The yeast piping is welded into the keg 4" TC keg lid, making for quick and easy inspecting and cleaning. The dip tube is about an inch from the bottom of the keg to help keep non-yeast solids that separate out from transferring with your repitch.
1/4 bbl is perfect for up to a 5 bbl batch with most yeasts. Also available in 1/2 bbl size for up to 10 bbl batches and 1 bbl size for up to 20 bbl batches.
Pro tip: If you align one valve handle 90 degrees to the other you won't forget which side is IN or OUT. If you do forget, with the PRV on the back side, the left side is the IN and the right side is the OUT.
This hop port cover is intended for use with MB conical fermenters. Features a welded hook on the underside to hang bagged flavoring additions and a welded handle on top for easy removal.
Made from 304 stainless steel.
This hydrator features a grain input port on the top and a tangential Hot Liquor input. It provides a good initial mix but does not eliminate the need to stir.
Hot Liquor input: 1.5” tri-clamp
Output: 4" tri-clamp
Recommended for 5 to 15 bbl mash tuns
Ferment under pressure with precisely tuned pressure settings
Pressure fermentations help to suppress unwanted esters
Make clean lagers faster and at higher temperatures
Easy-to-read etched pressure scale from 15 to 30 psi
Hand adjustable—turn clockwise or counterclockwise to raise or lower your setting
Made from 304 stainless steel with polycarbonate cylinder
MB is a brand dedicated to crafting and sourcing high-quality, professional-level brewing supplies
The MB T.C. spunding valve will give you the highest level of accuracy when fermenting under pressure. Designed for use with any pressurizable stainless steel conical with 1.5" T.C. top ports. For larger units, the spunding valve can also be integrated into the blowoff pipework and used with a pressure gauge and tri-clamp tee. The polycarbonate cylinder that surrounds the spunding valve can be filled with water or sanitizer to keep your tank 100% sanitary throughout the fermentation process.
Adjustable from 15-30 psi
Made from 304 stainless steel
11.75" H x 4" Ø
For Your Safety: Never exceed the maximum rater working pressure of your vessel at any time during operation. The fixed-pressure PRV on your conical should always remain in place while using this spunding valve.
This Reactor Rod was custom built to be used with the 1 bbl MoreBeer! Pro Conical Fermenter, but can easily be integrated to other vessels with a 4" tri-clamp top port. Unlike other in-solution cooling coils on the market, the Reactor Rod utilizes a straight vertical design. Without all the curves and bends of a cooling coil, it is easier to scrub and sanitize the unit prior to setup and after use. The four cooling rods are 32" long measured from the bottom of the T.C. fitting.
Made from a brand new 1 bbl keg with a 4" tri-clamp opening
1" yeast piping for easily moving dense yeast
Includes two 1.5" tri-clamp butterfly valves at the inlet and outlet
Adjustable PRV for lowering pressure for long term storage
1 bbl size, perfect for up to 20 bbl batches
The MoreBeer! Pro Yeast Brink is made with pro brewers in mind brewing up to 20 barrel batches. The yeast piping gives you a 1" passage to the bottom of a keg to make moving even the thickest yeasts a breeze. There is an adjustable PRV in case you need to lower the pressure for long term storage. The yeast piping is welded into the keg 4" TC keg lid, making for quick and easy inspecting and cleaning. The dip tube is about an inch from the bottom of the keg to help keep non-yeast solids that separate out from transferring with your repitch.
To make it easier to move the yeast brink around the brewery consider a keg cart.
Also available in 1/4 bbl size for up to 5 bbl batches and 1/2 bbl size for up to 10 bbl batches.
Pro tip: If you align one valve handle 90 degrees to the other you won't forget which side is IN or OUT. If you do forget, with the PRV on the back side, the left side is the IN and the right side is the OUT.
Designed by MB's in-house engineers with a focus on cleanability, ease of use, and durability
Made from 304 stainless steel throughout with passivated 2B polished finished on the interior
Sanitary tri-clamp connections from top to bottom with dedicated CIP port, hopping port, and blowoff—all fittings included!
20% extra headspace with a working volume of 2 bbl and max volume of 2.4 bbl
2mm thick single shell design—click here for the 2 bbl Jacketed Conical
Ships domestically from within the contiguous United States
These heavy-duty Beer Tanks are purpose built for longevity, quality, and cost effectiveness, and boast a hefty list of quality features to ease the brewing process. Starting with High Quality 304 grade stainless steel, the tank features a 2 mm thick single shell design. Large 12" T.C. dome top port allows easy access for cleaning and sanitizing, and on top of that, a 1.5" T.C. port allows for the attachment of a CIP spray ball. Useful features such as Blowoff Pipe, Hop Ports and Rotating Racking Arms keep you brewing and fermenting at top efficiency.
The 1 & 2 bbl MB Conicals feature a sealed pressure gauge, as well as plunger style sample port to protect against infection.
Great Quality from MB
MB is a brand that we dedicate to crafting and sourcing the equipment pro brewers need to make an exceptional product efficiently and consistently. Our conicals between 1 and 120 bbl are designed by our in-house team of engineers with decades of professional brewing experience. Focusing on cleanability, ease of use, and durability, we’ve made sure our fermenters have the features that modern brewers expect when purchasing a new tank. While some discount dealers chase down bargain priced tanks from a string of manufacturers, we have maintained a long running relationship with a single manufacturer that ensures the quality of our products never wavers.
Great Value from MoreBeer! Pro
If you used MoreBeer! as a homebrewer, you may not know that MoreBeer! & MoreBeer! Pro combined is one of the largest brewing supply companies in the world with over 250,000 customers. We’ve seen countless homebrewers turn pro, and there’s nothing that makes us happier than being a part of that transition. As a privately owned brewing supply company that's been in business for over 25 years, we’ve established relationships with suppliers and manufacturers around the world and at every level of the industry. We get a great price and we pass that on to you.
Features:
304 stainless steel construction
Single shell design, inner surface is 2B finish and passivated
Oversized for 20% headspace
Pressure/Vacuum relief valve 1 Bar / 15 PSI
60° conical bottom
Sample valve
Rotating racking arm
Analog temperature gauge
Yeast dump port
Hop port
CIP port
Carb stone
Separate blow-off pipe with 1.5" T.C. x 3/4" barb
Specifications:
Grade 304 Stainless Steel
2mm think single shell design
Internal Finish: #2B
Total Height w/ Blowoff Pipe: 62"
Tank Diameter: 26"
Empty Weight: 152 lbs
Working Volume: 2 bbls
Max Volume: 2.4 bbls
Working Pressure: 1 Bar (14.5 psi)
All ports are 1.5" TC except for 12" TC Dome Port and 4" TC Hop Port
Please Contact our Customer Service department at 1-800-600-0033 to assess shipment costs and place an order.
The German made 2/3 horse power MB Chiller is an ideal solution for nano breweries looking to chill up to 4 fermenters at once.
The idea of the MiniChilly is that for each fermenter you want to a chill a pump kit is added. A pump kit (GLY355) includes a submersible pump that is placed in the cold bath of the Mini Chilly along with a digital controller that is placed next to your fermenter. Silicone tubing is included to make the connections. The digital controller includes a thermal probe that should be inserted into a thermal well in your vessel or can be taped to the outside of the vessel if you don't have a thermal well. The digital controller then measures the temperature of your tank and turns the submersible pump on or off to cool the liquid in your vessel to the desired set temperature. In this way each tank can be set at different temperatures.
The MiniChilly is made by Quantor/Kreyer of Germany who is the largest manufacturer of glycol systems for breweries and wineries in the world. Made with high quality manufacturing and components, the MiniChilly is a durable system for many years of problem-free brewing.
The unit features a stainless steel case with stainless 3/8" barbs in the top that allow for a clean connection of the silicone tubing that will run from each pump to each tank. The MiniChilly is able to chill its reservoir down to 21°F when a 30% glycol solution is used. The compact size and included casters make it easy to move around the brewery when needed.
Applications:
Cooling of Fermentation
Cold Crashing for Brite Tanks
Maintain Lagering Temperatures
Compatibility:
The MiniChilly can be used with any fermenter that has a built-in cooling jacket or a submersed cooling coil. It works well as the cooling source for the following systems and fermenters.
Ss Brewtech Fermenters and Brites with optional FTS Temperature Control Systems: Because FTS systems include a pump and controller you will not need to buy a separate Glycol Pump Kit.
Spike Conical with Optional Cooling Package - Because the optional Spike cooling system includes a pump and controller you will not need to buy a separate Glycol Pump Kit.
Speidel Tanks with Optional Cooling Jackets - You will need one Glycol Pump Kit for each tank.
Grainfather Fermenters - Grainfather fermenters have standard cooling jackets. You will need one Glycol Pump Kit for each fermenter
Blichmann Fermenators with Optional Cooling Coil - You will need one Glycol Pump Kit for each Fermenator.
Capacity:
Many chiller ratings are based on the theoretical power of the compressor, while the cooling capacity of the MiniChilly is rated at a realistic ambient temperature. This is much more useful for predicting the MiniChilly’s performance in real world applications. Of course, you could cool a greater number of smaller tanks but you’re ultimately limited to the 3 connections. Actual cooling capacities will vary based on the insulation of the tank. For the examples below we assume neoprene or better.
Cooling Capacity Example:
Up to 5 1bbl (31 Gallon) tanks fermenting at 68°F in 80°F ambient temperature. For every fermenter you want to cold crash remove 4 fermenting fermenters from the capacity. Note there is only hooks ups for 4 fermenters.
Set Up:
In order to hook up the MiniChilly to your fermenter or tank's cooling system, you will need 4 lengths of tubing per pump. All tubing connections should be secured with hose clamps.
Length 1: Submersible pump outlet to inner barb of 1st bulkhead
Length 2: Outer barb of 1st bulkhead to cooling system inlet
Length 3: Cooling system outlet to outer barb of 2nd bulkhead
Length 4: Inner barb of 2nd bulkhead to MiniChilly reservoir (should drain freely, no connection necessary)
Technical Characteristics:
Power: 110V-1Ph/50-60Hz
Compressor Power: 2/3hp / 0.5 kw
Cooling Capacity at 32°F glycol temp and 90°F Ambient Temp: 0.38 KW/380 Watts (60Hz 110V)
Cooling Capacity at 60°F glycol temp and 90°F Ambient Temp: 0.65 KW/650 Watts (60Hz 110V)
Stainless Steel case
Water Temperature Range: 21°F - 86°F (-6°C - 30°C)
Ambient Temperature Range: 50°F - 90°F (10°C - 32°C)
Refrigerant R134a
Free Glycol Water-Bath for Mini-Pumps
Fittings 3/8" for Plastic Tubes of Individual Pumps
Solid Wheels w/ Brakes for Easy Mobility
Universal C19 Plug
On/Off Switch
Water-Level Sight-Tube
Grooves for Individual Pump Cables
Safety Inner Separation Water Side from Electric Side
Tank Capacity: 7.13 gal. (27 L)
Dimensions: 27.5"L x 14.5"W x 19.5"H
Weight: 79.5 lbs
Made in Germany
CE Certified
