MoreBeer! is the go-to homebrew shop for Blichmann Engineering spare parts! Most shops will charge you $15+ to custom order a replacement part to be sent directly from Blichmann, but we carry most of these parts in stock. This means you will get the parts you need faster, cheaper, and more conveniently!
No one wants a leak in his or her brew kettle, which is why the Blichmann BrewMometer Hole Plug Kit is such an essential part of your Blichmann home brewing setup. This innovative part can be used to plug the hole if you need to remove the thermometer from your brew kettle, and it is designed especially to fit inside of the hole left behind by the thermometer.
The Blichmann BrewMometer Hole Plug Kit can also be used to plug the thermometer hole if you decide to brew a smaller batch in a larger kettle, making your setup incredibly versaitle for any brew size. Simply drill a new hole wherever you want to place the thermometer, then use the convenient hole plug kit to securely stop liquid and heat from escaping through the exisiting thermometer hole. Because the Blichmann BrewMometer Hole Plug Kit is also made by the popular brewing brand Blichmann, you can feel confident that it will work seamlessly with your other Blichmann products.
Size: 1/2-20x1/2 hex head cap screw
This is a replacement seal kit for all Blichmann BoilerMaker Brew Kettles. We recommend purchasing a seal kit when you purchase a BoilerMaker as they're relatively inexpensive, and are great to have on hand if you have a leak on brew day!
Looking to get away from using propane with your Blichmann Floor Standing Burner? With this conversion kit, you now have the ability to use natural gas! The kit includes the orifice and needle valve.
This is a Blichmann Spare Part. 1/2" tri-clamp gasket. This is the gasket used on the Blichmann Fermenator's racking arm.
Note: Each order comes with one gasket.
Tired of your small airlock getting clogged from aggressive ferments? This blow-off kit is designed to work with the Tri-Clover Blichmann Fermenator. A superb upgrade for those looking for an airlock system that can handle aggressive, high gravity ferments.
Power Adapter from Blichmann Engineering. The adapter allows the 240V BoilBoil cable with L6-30P plug to be used with a 14-50P outlet. 14-50P outlets are commonly used for charging electric vehicles, RVs and electric ranges.
1.25 ft in length.
Take precise temperature control to the next level with the Fermenator™ G4 Cooling Jacket. Designed specifically for the Fermenator G4 Conical Fermenter—perfect for lagers, sours, and precision ales. Durable, easy to clean, and made for brewers who demand pro-level fermentation control.
This jacket is included with the Blichmann G4 Fermenator™ Cooling System.
Upgrade your Fermenator™ G4 Fermenter’s mobility with the G4 Caster Kit™. This optional add-on includes durable casters and front/rear-mounted handles for smooth and effortless movement. Working on uneven or rough surfaces? Add the caster extension frames for enhanced stability and confidence wherever you roll.
The Submersible Pump delivers reliable performance and efficiency, built specifically for homebrewers. It’s an ideal solution for circulating cooling fluids and also serves as a direct replacement for the pump used in Blichmann Fermenator™ G4 Cooling Systems. Compact, durable, and easy to use, this pump keeps your fermentation temperature control system running smoothly.
Looking for a way to add your hops to your fermenter without adding unwanted oxygen? The Aromanator™ is your solution. Use this accessory to dry hop through any 1.5” tri-clamp port. Comes with a keg post to purge oxygen from the Aromanator™ and a 2” butterfly valve to seal your wort before hop addition.
Allows for full purge of hops from the bottom up for true oxygen-free dry-hopping. Oxygen can cause off-flavors in beer, and this can help eliminate them! Easy to assemble with sanitary tri-clamp connections. Quick to assemble and easy to clean! A clear cap ensures visibility to see that every hop pellet has fallen. Robust purge valve with integrated open valve detent for easy operation and safety! 2” sanitary butterfly valve allows passage of large hop pellets! An optional reducer can be installed to use other attachments during fermentation, meaning you can use any 1.5” TC attachment you want on your fermenter! Connects to any 1.5” or 2” tri-clamp port on your fermenter!
Includes:
Aromanator™ Body
Aromanator™ Lid Pressure Relief Valve and Nut
2” TC Butterfly Valve
2” to 1.5” Tri-Clamp Adapter
(2) 2” Tri-Clamp
(2) 2” TC Gasket
3” Tri-Clamp
3” TC Gasket Gas Ball Lock Post
Optional Reducer Kit
The optional reducer kit includes an extra 2” to 1.5” tri-clamp adapter, a 2” tri-clamp, and a 2” TC gasket. It can be used to prevent oxygen from entering the fermenter when changing attachments on the top of your fermenter.
The Aromanator™ Reducer Kit helps maintain an oxygen-free environment during fermentation when switching between the Aromanator™, a blow-off tube, or an airlock. This kit makes it easy to swap attachments without exposing your fermenting wort to oxygen, preserving the aroma and quality of your brew. It’s an essential tool for brewers who want precise control over fermentation conditions and flavor retention.
The Tri-Clamp Blow Off Tube’s unique, versatile design allows it to fit all of our Fermenator™ G4 sizes, from 7 gallons all the way up to 1BBL! Every interior surface is visible, making it easy to see and clean any residue from fermentation.
304 Stainless Steel
1" Tri-Clamp
1" Hose Barb
Includes:
Blow Off Pipe
Tri-Clamp Elbow
Clamps
Gaskets
1" Tri-Clamp Barb
Fits 7, 14, 19, and 1 BBL Fermenator™ G4s! Also fits 1.5" tri-clamp ports on other fermenters.
Looking for an oxygen-free counter-pressure keg filler? The Venty™ is the perfect addition for oxygen-free transfers! Just attach the Venty™, purge your keg, set the Venty™ pressure, and fill! It’s that simple!
Precise Pressure Control
Fits Standard Ball Lock with 1/4″ Male Flare
Simple Tool-Free Installation
Stainless Construction
The maximum operating pressure of the Venty™ is 45 PSI.
The patent-pending G2 Linear Flow Valve is now in tri-clamp! Easily fine-tune your flow rate for sparging, lautering, and chilling, increasing the repeatability of your system. The built-in 90-degree outlet can be oriented at any angle, making hose routing simple and kink-free. Eliminate those extra elbows and other fittings on the valve for clean and simple routing. Unlike other valves, the new G2 valve disassembles in seconds for a quick cleaning! The cool-touch silicone grip makes handling under fire easy, and the silicone material handles temps to 600°F so it won’t melt like vinyl grips on ball valves do. The G2 linear flow valve is one of the many features tailored specifically for brewers.
The Flow Control Manifold is specifically designed for the Command Stand™ by Blichmann Engineering! Check the flow and divert the wort with this flow manifold. Designed to attach to the Command Stand™ and get your flow going through your brewing setup!
2.5 Gallon Propylene Glycol Concentrate (DowFrost™inhibited propylene glycol) heat transfer fluid provides years of reliable corrosion protection in demanding applications such as fermentation cooling, immersion freezing, and food applications. Compliant with USDA and FDA regulations, this product is ideal where contact with food or beverage may occur.
Features:
Wide Temperature Range: Effective from -60°F to 250°F.
Freeze and Burst Protection: Down to -60°F and below -73°C respectively.
Corrosion Inhibition: Contains inhibitors to protect against metal corrosion.
Food Grade Safety: FDA and USDA-compliant ingredients are suitable for incidental food contact.
Non-Toxicity: Low acute oral toxicity, safer than ethylene glycol.
Ease of Use: Pre-diluted for immediate application.
Appearance: Colorless, water-white solution.
Industry Standard: Widely accepted in various industrial applications.
Economic Benefits: Reduces long-term costs due to longevity and maintenance ease.
Our patent-pending G2 Linear Flow Valve is tailored specifically for brewers. Fine-tune your flow rate for sparging, lautering, and chilling and increase the repeatability of your system. Tool-free assembly allows easy cleaning. Fits 1/2” NPT.
The In-Line Oxygenation Kit designed by Blichmann Engineering™ sets your brew day up for success. The stainless steel diffusion stone dissolves oxygen into your wort to promote yeast health and vigorous fermentation. It also reduces lag times to produce the finest homebrewed beer without off-flavors from stressed yeast.
Unlike other products on the market, this product quickly and completely disassembles for cleaning and sanitation. We have also selected a stone porosity that is the perfect balance between small bubble size for quickly dissolving the oxygen, yet has the permeability for sanitizers to fully and quickly penetrate the stone for proper sanitation. Other manufacturers use stones so fine that sanitizers cannot penetrate them and they must be boiled to be properly sanitized. But not ours! Your success is our priority when it comes to brewing!
Key features include:
Stainless steel diffusion stone
Two 1/2″ QuickConnectors™
High-quality O2 regulator
Custom stainless steel fitting
5-foot O2 hose
Easy to sanitize
Requires “welding-type” oxygen tank on Premium In-Line Oxygenation Kit (silver regulator) and disposable oxygenation tank on Standard In-Line Oxygenation Kit (gold regulator)
Optional ThruMometer™ for in-line temperature measurement
Elevate your brewing adventures with the Blichmann Engraved Stanley Beer Stein. This durable 18/8 (304) stainless steel vessel features double-wall vacuum insulation to keep your beer cold for hours, a heavy-duty handle for a secure grip, and our laser-etched logo for a custom touch. Dishwasher safe and BPA-free, it’s built to hold 24 oz—perfect for two cans—and withstand countless toasts.
