Counterflow & Plate

This 40 plate chiller is efficient, effective and economical!   This popular addition to your home brewing system promises to cool your wort to the perfect low temperature to get the best cold break possible, and getting your wort to the ideal pitching temperature on the first pass.   Equipped with a 1/2" MPT wort inlet and outlet to match up to the most common size of home brewery hoses, as well as a 3/4" male garden hose thread water inlet and outlet for easy connection to garden hose fittings. It measures approximately 8.25 inches long, 4 inches high and 3 inches wide.   Specifications Wort Inlet/Outlet: 1/2" MPT Water Inlet/Outlet: 3/4" MGHT 8.25" Long x 4" High x 3" Wide

Read more less

The Blichmann Therminator Wort Chiller is one of the most popular tools to use when chilling your wort, as it gets the job done quickly, effectively and without much effort from you. This particular chiller has 40 plates and 316 stainless steel plates and fittings. It features ½ inch MPT for the wort in and out, and a ¾ inch MPT garden hose thread for the water in and out. You’ll be able to chill just like the pros when you use the Blichmann Therminator Wort Chiller, as it is extremely similar to the chillers used in commercial breweries. The Therminator chiller is small but mighty, with the capability to chill 10 gallons of wort down to 68 degrees when using 58 degree water in just five minutes! It measures an ultra compact 7.5 inches wide, 4 inches deep and 3 inches high, which also makes it very easy to clean and sanitize. It is brazed together with pure copper in an oxygen-free furnace so there are no potential leaks, and it even comes with heavy gauge stainless mounting bracket to keep your system looking sturdy and seamless.    All 316 stainless steel plates and fittings. Chill like the pro's - Identical to commercial brewery chillers. Brazed together with pure copper in an oxygen free furnace - no potential leaks like a gasketed unit. Chill 10 gal in 5 min to 68°F using 58°F cooling water at 5 gpm. Ultra compact (7.5" W, 4" D, 3" H) Easy to clean and sanitize - small enough to boil! Garden hose thread connections on water side - no extra adapters to buy. 1/2" male NPT fittings on wort side mates up with virtually all common hose connector types. Much easier to sanitize than female fittings. Comes with heavy gauge stainless mounting bracket

Read more less

Don't fear the Beast, feed the Beast! This heavy duty counterflow wort chiller will gobble up heat from your wort as it passes from kettle to fermenter so you can pitch your yeast as soon as possible. Made from passivated 304 stainless steel, The Beast has a 30 ft. wort line with 1.5" T.C. connections and a 29.5 ft. coolant line with 1/2" male BSPT connections. Tri-clamp connections offer the most sanitary way to pass wort through your heat exchanger and pairs perfectly with BrewBuilt's line of T.C. Kettles and X1 Uni Conical Fermenters. The BSP coolant connections work well with Camlock, Duotight, NPT or other BSP fittings found below. Adding a ball valve to the coolant line inlet is a great way to dial in flow for maximum cooling efficiency! When it comes to counterflow chillers, we love the coil design for its ease-of-use. Plate chillers are great for their high efficiency and compact size, but if there's too much hop matter running through them, they can quickly clog up. Transferring wort from your kettle to your fermenter is one of the critical steps in the brewing process where you don't want any hiccups. The Beast's wort line is 1/2" ID so it can withstand high amounts of hop additions without clogging! A cross bar is welded on one side of the coil with pre-drilled mounting holes allowing it to be easily installed under your work bench or mounted directly to your brewing system. Specs: Beer Line: 30 ft. long Beer Connection: 1.5" tri-clamp Coolant Line: 29.5 ft. long Coolant Connection: 1/2" BSPT Crossbar with pre-drilled mounting holes (4mm) Made from 304 stainless steel  

Read more less

Plate heat exchangers are one of the fastest ways to cool your wort and the Chillout is one of the best. The Chillout MKIV, now with new and improved male 1/2" BSP threaded posts, is the fastest way to chill your wort to yeast pitching temperature to get your fermentation off to a quick healthy start. made from stainless steel and brazed together with pure copper. It also has ripples along each plate that create more surface area to improve heat transfer. A great addition to your brewing setup. Set up one side with Wort in & out, and Water out & in on the other side.  Features: Made from stainless steel and copper Rippled plates for more surface area 1/2" Male BSP connections Dimensions: 12.4" x 2.8" x 2" (not including threads) KegLand Part Number: KL21234    

Read more less

Counterflow design provides rapid, single-pass wort chilling Larger flow area minimizes hop clogs compared to plate chillers 9.5mm Duotight compatible inlet/outlets allow for quick and easy hose connections Durable PEX tubing resists high temperatures and pressures, extending the chiller's lifespan Tired of slow, inefficient wort chilling? Meet the Red Reaper Counterflow Chiller, your ultimate brewing ally. This isn't just another chiller; it's engineered for speed, durability, and hassle-free brewing. Unleash Rapid Cooling with Superior Design: Robust PEX/Copper Construction: Unlike standard clamped connections, the Red Reaper boasts PEX tubing swaged and soldered directly to the copper wort pipe. This innovative design guarantees a leak-proof, high-pressure connection, ensuring your cooling water stays where it belongs. Lightning-Fast Duotight Compatibility: Seamlessly connect your hoses and camlock fittings in seconds with the 9.5mm Duotight compatibility. Brew more, fuss less. Add the Duotight Push-In Thermowell Tee to add a thermometer to your wort out line. High-Efficiency Counterflow Design: Featuring an internal copper tube for wort circulation and an outer chamber for counterflowing cold water, the Red Reaper maximizes heat transfer for rapid chilling. Experience the power of single-pass cooling from boiling to pitching temperatures. Clog-Resistant Flow: Enjoy the benefits of a plate chiller's efficiency with a larger flow area that minimizes hop clogs. Built for Performance and Longevity: The Red Reaper utilizes the same pressure and temperature-resistant PEX hosing trusted in professional plumbing, offering exceptional flexibility and durability. We recommend recirculating your last 15 minutes of boil through the Red Reaper to sanitize it before chilling with cold water. Easy Cleaning and Maintenance: For optimal cleaning, circulate hot PBW for a minimum 5-minute contact time. Alternate flow direction for thorough cleaning, and rinse with water at the same temperature. Important Care Instructions: Avoid Sunlight: Prolonged exposure to sunlight can degrade the PEX tubing. No Acidic Cleaners: Do not store with StarSan or other acidic products, as they can damage the copper. What is PEX? PEX (cross-linked polyethylene) is a flexible, durable plastic tubing used as a reliable alternative to traditional copper or steel plumbing. Choose Your Fittings: The Red Reaper comes with bare, 3/8" barbs that you can simply clamp your tubing onto. However, we recommend using 9.5mm Duotight x 1/2" male thread adapters which will allow you to convert to your preferred fittings for the water and wort lines -- Camlock, Garden Hose, Tri-Clamp, Quick Disconnect (QD), etc. Specifications: 18.3 ft. Length 3/8" barb inlet/outlet 9.5mm Duotight compatible Rubber feet Hinged hanger (for BrewZilla handles) KegLand Part Number: KL38355  

Read more less