Ss Brewing Technologies

Upgrade your home brewery with an innovative, Stainless Steel, 7 Gallon Brew Bucket™ Fermenter!  You will enjoy many of the benefits of a stainless conical fermenter but at a fraction of the cost and you are going to love how easy it is to use!  Made by Ss Brewing Technologies from polished 304 Stainless Steel, the Brew Bucket™ fermentor is not only functional it is downright beautiful. At MoreBeer!  we know brewing equipment and we truly believe this is a piece of equipment you are going to enjoy using every brew day. We inspected and used the Brew Bucket™ and one of the most unique features that stood out is that the Brew Bucket can be stacked during fermentation, even with an airlock attached. We also like the conical bottom that allows trub to settle out in a concentrated space that minimizes the surface area of the trub that is in contact with your beer.  The included Patent Pending Rotating Racking Valve is also a brilliantly simple design allowing you to rotate the racking arm inside the Brew Bucket down during fermentation to minimize trub, and later up to get clear beer when racking!   Etched Volume Markers on the inside were super handy when filling and display in both Liters and Gallons. The build quality is really amazing for the price. Welds are clean. The lid is strong and the spring loaded lid hatches are solid.  The lid includes a removable, molded silicone gasket that ensures an airtight seal.  We love an airtight seal so that we can be sure to see the airlock working.  The welded on stainless handles make the BrewBucket fermentor super easy to move.  Overall: Very functional, easy-to-use, will last a lifetime, and looks amazing. Lets make some beer! Features: Certified Food Grade 304 Stainless Steel Construction Patent Pending Stainless Rotating Racking Valve 6.95 gal Max Capacity 40° Conical Bottom for Trub Trapping Nests for Storage, Stacks for Ferment! Molded Silicone Lid Gasket Spring Loaded Lid Clamps for Airtight Lid Seal Offset Airlock Hole includes Silicone Stopper Gallon & Liter Markers inside for visual volume assessment Stainless construction resists damage and is easy to clean 21” Height x 13” Width 10 lbs Note: 1/2" Silicone fits into the lid hole for use as a blowoff.  3/8" ID tubing is perfect for racking beer from the BrewBucket's valve.

Read more less

Blow off barb for the FTSs Lids and Brew Bucket/ Brewmaster Bucket Lid. Comes with the blow off barb, 2 gaskets and a lock nut. Features: Custom tooled for FTSs/Bucket lids! Fits into blow off / airlock hole 1/2" hose barb 304 Stainless construction Includes 1 spare o-ring (1 o-ring for use / 1 spare)

Read more less

The Ss recirculation manifold is a nice gentle way to recirculate your wort. The manifold sits on top of the grain bed and evenly distributes the flow through 24 different holes on top of the manifold. Works great with our recirculation bulkhead fitting (BE386) and 1/2" FPT to 3/8" knurled hose barb (BE387). The manifold will fit in Ss Brewtech 10-30 gal kettles and mash tuns. It's 12.6" in diameter of 304 stainless steel with a 3/8" hose barb inlet.

Read more less

Replacement set of O-rings for Ss Brewing Technologies Brew Bucket ball valve and racking arm.

Read more less

Another great invention coming out of Ss Brewtech, the Keg WaSsher! This is a hands free, clean in place keg washer that will make cleaning kegs one of the easiest steps of the brewing process. Gone are the days of disassembling your keg to clean it. The cleaning process is pretty simple. Just take the keg lid off, attach the keg washer, attach both ball lock QDs, stick the whole thing upside down in a bucket full of sanitizer, turn on the pump and your keg is clean. The Keg WaSsher is designed to fit in a standard 5 gallon bucket. It also only uses 2 gallons of cleaning solution resulting in less chemical waste and evironmental impact. If you want to get fancy, you can set up a wash station with 3 buckets to perform an initial cleaning, fresh water rinse, and sanitizer. All you have to do is lift the whole apparatus from one bucket to the next! Features: Hands free operation Chemical resistant submersible pump Attaches to common ball-lock Cornelius-style kegs w/ removable lids Powerful CIP spray ball Entire assembly fits in 5-gallon bucket Cleans inside of keg and ports simultaneously Easily attaches/detaches from kegs Perform clean, rinse, and sanitize steps all with the same unit

Read more less

Upgrade your home brewery with an innovative, Stainless Steel, 3.5 Gallon Brew Bucket™ Fermenter!  Many have asked for a smaller BrewBucket, and that has been heard.  The Brew Bucket mini is perfect for 2.5 gallon batches.  With features similar to the original 7 gallon Brew Bucket, the Mini is a great way to do smaller batches.  Whether you are interested in splitting a 5 gallon batch for experimenting, or just brew 2.5 gallons, the BrewBucket Mini is a great choice. Featuring a conical bottom, 304 SS construction, a rotating racking arm valve, and stackable design, these are space saving feature rich fermenters that are easy and enjoyable to use.  We inspected and used the Brew Bucket™ and one of the most unique features that stood out is that the Brew Bucket can be stacked during fermentation, even with an airlock attached. We also like the conical bottom that allows trub to settle out in a concentrated space that minimizes the surface area of the trub that is in contact with your beer.  The included Patent Pending Rotating Racking Valve is also a brilliantly simple design allowing you to rotate the racking arm inside the Brew Bucket down during fermentation to minimize trub, and later up to get clear beer when racking!   Etched Volume Markers on the inside were super handy when filling. The build quality is really amazing for the price. Welds are clean. The lid is strong and the spring loaded lid hatches are solid.  The lid includes a removable, molded silicone gasket that ensures an airtight seal.  We love an airtight seal so that we can be sure to see the airlock working. The welded on stainless handles make the BrewBucket fermentor super easy to move.  Features: 304 SS Food Grade Construction Rotating Racking Arm & Valve (Patent Pending) 3.5 Gal Max Capacity (2.5 gal Batches) 40° Conical Bottom for Trub Trapping Nests for Storage & Stacks for Ferment! SS lid w/ Silicone Gasketed seal Spring Loaded Lid Clamps for Airtight Lid Seal Offset Airlock Hole includes Silicone Stopper Gallon Markers inside for visual volume assessment Stainless construction resists damage and is easy to clean 8.5" Bottom Width / 11" Top Width x 16" Height Please note: the thermowell pictured in the second photo is not included.  

Read more less

Replacement lid stopper for the Brew Bucket and Brewmaster Bucket. The stopper is made out of food-grade silicone and is designed to fit a 17 mm hole.

Read more less

A replacement gasket for the lids of SS Brewtech 7 gallon Chronicals and Brew Buckets. 

Read more less

CIP (clean in place) is a commonly used technique to clean large craft brewing vessels. At Ss, we've taken the same principles used in our pro fermenters and scaled the design down for homebrewers to speed up their cleaning process and improve their sanitation practices, just like craft breweries. 304 Stainless steel construction 3" TC 1/2" MPT fitting Recommended to use with the 1/2" Hose Barb 2 bar / 29 psi / 7 gpm flowrate recommended Does not include TC clamp or gasket Pro version has a larger spray ball designed for larger pumps (17 GPM) and vessels 1BBL and larger.

Read more less

The Ss Brewtech Whirlpool fitting attaches to the thermometer port, the recirculation port, or another 7/8" hole. Creates a nice whirlpool action that works perfectly with a trub dam to keep out most of the hop matter and other solids from your fermenter. Made from 304 stainless steel. The whirlpool fitting has a 1/2" MPT and comes with 1" x 1/2" bulkhead. Please note this product is intended to be used with a 1/2" FPT ball valve (BE382) on the outside of the kettle. Please see the Whirlpool Fitting Quick Reference Guide below for installation and operation instructions.

Read more less

This thermometer from Ss Brewtech installs into the thermometer port on their Brew Kettle in minutes. Easy to read 3" dial face with 1/2" male thread on the back. Comes with 1/2" female bulkhead constructed from 304 stainless steel, high temp silicone o-rings included. This thermometer is not compatible with the Brewmaster Edition Brew Kettle. For the BME compatible thermometer with 1.5" TC fitting, see MT513.

Read more less

This clean in place spray ball from Ss Brewtech attaches to a 1.5" tri clamp to clean the inside of whatever container you attach it to. Has a 1/2" MPT and made from 304 stainless steel. The attachment is 2.5 in. long and 0.75 in. wide. 1.5" tri clamp gasket and clamp not included. A pump capable of 29 PSI minimum is recommended for this product. Does not fit Chronical BME, Chronical 2.0, or Unitanks.  

Read more less

1.5 in. TC sample valve from Ss Brewtech. Uses lever operation and easily disassembles for cleaning. Features: Made from 304 stainless steel Knob/Bonnet operation Completely sanitary with silicone seal Easy disassembly for cleaning Compatible with most sampling coils

Read more less

Ss BrewTech has done it again, taking brewing equipment to an innovative next level.  These are a premium lineup of feature rich all Stainless Steel Brew Kettles, designed to keep you brewing for a lifetime.  What really sets this boil kettle apart from the rest is the first ever integrated trub dam and pick-up tube assembly that Ss has designed into the back of the 304 Ss 1/2" ball valve (3pc).  It is a brilliant little piece which will help with a more efficient whirlpool, leaving more trub in the kettle, and bringing more wort to the fermenter!  Other features include robust triclad bottom, internal gallon markings, and strong riveted handles with molded silicone grips that can hang the lid. Features: Heavy duty 18 gauge 304 Stainless 1.2 x 1.0 height to width ratio Triclad bottom - no scorching! Internal etched gallon markings (starting at 1 gal!) Thermometer port High Quality Weldless Fittings Robust riveted silicone handles for safety Hang lid on side handles Optional coupling for thermometer Dimensions: 13.4" H x 11" W 5.5 Gallons total volume

Read more less

Another high quality intuitive piece of brewing gear from Ss BrewTech, the Ssparge Arm!  Simple design, with adjustable height and flow rate, this is a necessary add on for the Ss InfuSsion Mash Tuns.  Incredibly easy to use: Simply choose and thread on a flow rate disk, clip the unit to your mash tun, set the height just above your grain bed, and get brewing!!  See the Documents tab above for a more detailed guide to use. For USE ONLY ON Ss MASH TUNS (10/20 gal) 304 Stainless Steel construction Designed for gravity feed from HLT Or hook your own pump / flow control valve 3/8” diameter stainless tubing 3/8" barb on inlet of tubing Custom silicone handle mount for Ss Mash Tun Easily adjust height of sparge head up  / down Uniform liquid dispersion fom sparge head

Read more less

Ss Brewtech T.C. thermometer. Made for the Brewmaster Edition Kettles but these will fit any 1.5 in. Tri Clamp fitting. Specifications: 1.5 in Tri-Clamp 3 in dial face +/- 1% accuracy Farenheit and Celcius

Read more less

LCD Temp Display Module for Mash Tun and FTSs units. Displays in Fahrenheit. Features: Digital temp sensor Easy to read LCD display Batteries included Silicone rubber housing Custom tooled to use with Chronicals

Read more less

The Vorlauf Arm Assembly is great for recirculating your mash. It fits right into the Ss Brewtech recirculation bulkhead fitting with a 1/2" knurled FPT locking nut.  Made from 304 stainless steel.  

Read more less

Designed to adapt weldless punched holes into 1/2" female threaded connection ports. 1/2" Female threaded 304 Stainless steel Hi-temp silicone o-rings Fits into 13/16" punch hole

Read more less

Leg Extensions for the 14 gal and 1/2 BBL Chronical Conicals.  Works with both standard and BrewMaster edition Chronicals. Features: 304 Stainless Steel Finish matches Chronical legs 3/8" male stem on top (insert to legs) 3/8" female on bottom (for casters/feet) 10" total length

Read more less

Need a ball valve with a TC connection? Ss Brewtech has got you covered! This 1/2 in ball valve has 1.5 in TC on one side, and 1/2 in female NPT on the other. It is perfect for Ss Brewtech BME kettles as a tangential inlet. Features: 3 piece body Made from 304 stainless steel 1/2 in ID valve body 1.5 in TC 1/2 in. female NPT

Read more less

Replacement O-rings for the Chronical Racking Arm bought after September 2014.   

Read more less

The Sspunding Valve from Ss Brewtech allows you dial in the precise pressure at which you want your Unitank fermenting. A spunding valve is essentially an adjustable pressure relief valve. Normal PRVs that are found on kegs, couplers and come stock on Ss Unitanks, operate as safety features that will release pressure when it's nearing dangerous levels. Spunding valves, on the other hand, allow you to set the release pressure much lower. Simply dial in your desired fermentation pressure, and the Sspunding valve will release excess pressure when it gets too high. The scaled Sspunding valve includes an etched sleeve with a scale between 0-2 BAR, along with a pressure calibrated spring.  This version is perfect for a home or nano brewer that wants to be able to dial in pressures on the fly without having to match the release pressure using a gauge. The scaled version also features a pressure release knob to quickly and easily verify or equalize tank pressure. If you're looking for a more affordable option, check out FE892A for the non-scaled version. The polycarbonate cup is designed to hold sanitizer so that the tank remains 100% sanitary throughout the course of the fermentation process. You can pair the spunding valve with a 1.5" tri-clamp tee (H666) and 90-degree elbow (H667), which enables the unit to be installed on the Unitank’s blow off arm, as shown in the photo. All 304 Stainless Construction Only for use with pressure rated Unitanks 1.5" TC interface Removable sanitizer cup Easy disassembly for cleaning Not for use on low pressure vessels (Chronicals, etc.) For Your Safety: Always leave the fixed-pressure PRV included with the Unitank in place. Never exceed the maximum rated working pressure of the vessel at any time during operation.  

Read more less

Used along with the Ss recirculation bulkhead, this fitting adds a 3/8" hose barb on your mash tun. It attaches with a 1/2" FPT knurled locking nut and is required if you are using the Ss recirculation manifold. Made from 304 stainless steel and silicone O-rings included.

Read more less

Replacement silicone feet for your Brew Bucket. A must have to keep your stainless steel fermenter level when the original feet get lost or damaged. Pack of 4.

Read more less

Weldless Thermowell from Ss Brewing Technologies. The universal design allows for easy installation on most vessels (including Speidel!). A must have upgrade for your existing Brew Bucket. It is constructed from 304 stainless steel, and approximately. 6 inches in overall length, with the inner thermowell portion being almost 4 of those inches.  The thermowell fits into a 17mm punched/drilled hole.

Read more less

Replacement 3/8 inch ball valve and racking arm for the Brew Bucket and Brewmaster Bucket. Brewers grade 304 stainless construction. Comes with an external o-ring that seals between the valve and bucket along with an internal o-ring (inside the ball valve) for connecting the racking arm. 3/8 in. tubing works great with a hose clamp and this valve, or use 5/16 in. for a tighter fit.

Read more less

This pressurized transfer fitting from Ss Brewtech is perfect for pushing beer to kegs. Fits on any 1.5" tri clamp flange. It includes a relief valve right in the fitting that releases at 2-2.5 psi. Made from 304 stainless steel.

Read more less

A stable mash temp is one of the most important elements of the brewing process. The Ss Brewtech InfuSsion Mash Tun is the perfect choice for brewer’s looking to upgrade their aging plastic cooler. It’s built to last, made exclusively of 304 stainless steel and designed for those who want professional grade equipment and features for their home brewery. The double walled construction with injected high density foam insulation is incredible at mitigating temp loss and holding temperatures stable throughout the duration of a typical mash rest. The venerable InfuSsion Mash Tun has been updated with TC ports throughout for easy integration with the rest of the Ss Brewtech line up. Additionally, the InfuSsion Mash Tun is the first Ss product to be released with the Patent Pending Pure Flow Valve platform. Fully sanitary, easy to clean, and micro adjustable Pure Flow valves are designed as the ultimate brewing valve. Pro-Inspired Pro features like a 5° sloped floor with center drain, zero deadspace design, etched volume markings, integrated thermowell, thermometer, and the ability to incorporate mash recirculation result in the most thoroughly engineered and efficient mash tun available to homebrewers.  Upgradable The InfuSsion Mash Tun is now equipped with a 3/4" TC recirculation bulkhead which allows quick installation of optional accessories such as the vorlauf attachment or a recirculation manifold. Pure Flow Valve With a clean slate, the Ss Engineering Team took a stab at creating the perfect sanitary valve for brewing. The foundation of the Micro Adjust Valve is a removable silicone membrane that seamlessly integrates TC gasket geometry. This ingenious design provides a 100% sanitary environment where beer makes contact with nothing except pure silicone while inside the valve. Features: 304 Stainless steel construction 1” thick insulated side walls and lid Sanitary TC ports 5° sloped floor with center drain eliminates dead space Gasket sealed stainless steel false bottom 1.5" TC Pure Flow Valve 3/4" TC recirculation bulkhead Redesigned feet with locking screw  Redesigned LCD thermometer Etched volume markings gals/liters What's Included: InfuSsion Mash Tun LCD thermometer (°F/°C) Silicone thermometer boot (2) 1.5" TC clamps (2) 1.5" TC gaskets Pure Flow Valve 1.5" TC Thermowell Silicone plug for recirculation hole 3/4" TC recirculation bulkhead Perforated false bottom Silicone false bottom gasket   Lowest Price Guarantee, this item has MAP pricing so you can be confident you won't find it for less.

Read more less

This is a dome lid for Ss Brewtech 7 gal Chronical and Brew Bucket fermenters. It features a 3" tri clamp opening at the top to facilitate dry hopping or cleaning your fermenter in place. Made from 304 stainless steel. Does not include 3" TC gasket and clamp.

Read more less

This sampling coil from Ss Brewtech allows you to easily take samples while your tank is under pressure. Specifically designed to be used with the Ss Brewtech sample valve (H586). Features: 10 Turn proof coil made from 304 stainless steel 5.5 feet of stainless coil allows for sampling under pressure Coil is welded to compression body Compatible with all Ss Brewtech Unitanks Compatible with all Ss Brewtech Pro Unitanks 3 mm ID and 4 mm OD stainless tubing

Read more less

Tri-clamp racking arm adapter for 7, 14, and 1/2 BBL Chronical Conicals. Features: 304 Stainless Steel construction For those of you who want threadless/ TC fittings Custom designed for Chronical series fermenters! Use with 1.5" TC butterfly valve of your choice

Read more less

Designed to make moving unfilled brewing vessels easier. HD casters are designed for use on our fermenters and brite tanks 1BBL and under. Also can be used with our Ss Grain Mill Cart and other modular Brew Cubes. Not for use with our Nano Jacketed Unitanks.  Stainless Steel caster frame with brake Designed for harsh brewery wash-down environments Ideal for use with Half BBL and 1BBL vessels 3" wheel diameter 3/8" UNC x 2"  Zinc coated stems 250 lb static load rating per caster Includes stainless washer leveling kit The installation guide can be found here. Please note proper installation is required to prevent damaging the casters. *Not intended to be moved when full. *Not For Nano Jacketed Tanks

Read more less

Ss BrewTech's T.C. brewing kettle is made from quality 304 stainless steel and can last you a lifetime of home brewing. This high-quality boil kettle features an aluminum core Tri-Clad bottom to foster even heating and minimize the risk of scorching and allow for the use of induction heating. Tri-Clamp ports have long been the standard in professional brewing, and for a good reason, they're quick, sturdy, and sanitary.  The Ss T.C. Brew Kettle now brings this pro-level feature to the home brewer in an affordable package. The sturdy riveted silicone-coated handles are located on the front and back for easy moving and dumping of the kettle while also allowing for tighter brew stand setup. Just like the original Ss Brew Kettle, the T.C. version features an integrated trub dam into the dip tube to minimize the pickup of trub and hop material during knockout. The result is much clearer wort making its way into your fermenter. Features: Tri-Clad bottom Sanitary TC Ports Sturdy riveted silicone coated handles 3-piece TC ball valve with trub dam pick-up tube Lid designed to hang on side of handles Etched volume markings gals/liters Induction burner compatible Included Hardware: (2) TC Clamps (2) Silicone Clamp Gaskets 3-piece TC Ball Valve Dip Tube w/ Trub Dam Silicone Trub Dam Blade TC Port Plug Specs: Size Capacity Diameter Height 10 gal 10.7 gal 13.8" 16.5" 15 gal 15.7 gal 15.8" 18.9" 20 gal 22.7 gal 17.7" 21.3" 30 gal 31.1 gal 19.7" 23.7" 50 gal 53.0 gal 23.6" 28.3"   Lowest Price Guarantee, this item has MAP pricing so you can be confident you won't find it for less.  

Read more less

These caster wheels are designed to move empty half bbl and under vessels. 1BBL vessels should use HD | Casters. Older 7 gal Legacy Chronicals do not have threaded feet and use the Caster Boots instead.  Kit includes 3 or 4 casters with leveling washers Compatible with Chronicals series, Unitanks, and Brite Tanks 3/8" x 1.5" stem Includes brake High-quality PP wheels Double bearing wheels Click here for Quick Ref *Not intended to be moved when full, damage can occur. *Not for Nano Jacketed Tanks.

Read more less

A Pressure Relief Valve upgrade or replacement for the Chronical line of fermenters from Ss BrewTech. Features: Standard replacement part for Half Barrel Can be retrofitted to 7 Gal Chronical lid Releases pressure between 2-2.5 psi Food grade silicone O-ring Use Dewalt DWA1783IR step bit for retrofit For 7/32" inch hole diameter (in lid)

Read more less