Homebrew Cleaning Equipment

Our favorite brewer gloves are made from a chemical resistant PVC that protects your hands from harsh cleaning chemicals. With a length of 21.5 in, these elbow length gloves allow you to reach into liquids while protecting your hands and forearms.  We also like these gloves because they offer more heat resistance than the standard green brewing gloves.  Great for cleaning your brewery and handling brewing equipment in a sanitary way!    Kegland Part Number: KL05289

Read more less

You’ll never regret owning the right tool for the job!   This line brush is 1/4” in diameter and 36” long. You can use it to clean any 1/4” ID tubing in your brewery or draft setups. The long handle makes it convenient for long lengths of tubing.   Use it to clean: Draft lines Keg dip tubes Down tube on your Cornelius keg Racking canes Any tube or line that is 1/4” in diameter

Read more less

Quickly clean kegs and fermenters while you tend to other tasks High flow rate pump provides a powerful blast that coats the inside of the vessel Use it for cleaning or sanitizing with your favorite solutions 15L bucket provides a much larger reservoir compared to other models Everything included in the system neatly fits inside the bucket for easy storage The Bucket Blaster is a convenient and effective system for cleaning and sanitizing kegs, carboys, and other brewing vessels. The beauty of the Bucket Blaster is that you can set it and forget it. Simply set up the keg washer basin with your cleaner or sanitizer, set your vessel over the jet nozzle, power up the pump and let the Bucket Blaster do the work while you tend to other tasks. Perfect for homebrew kegs, carboys, FermZillas, or bucket fermenters. This unit comes with a 15L (3.9 gal) bucket, which doubles as a storage container when you are not using the system. Other keg washers come with a very small reservoir that make it a pain to move, as liquid spills over the sides easily and generally they just do not work as well. The Bucket Blaster's large 15L reservoir makes it much less likely for you to spill liquid on the floor, and since it can hold more cleaning solution, each cleaning cycle will be that much more effective. Includes: Submersible Pump - 2,000 L/hr 15L Bucket Powerful Jet Nozzle 9.5 mm EVABarrier Tubing Gray and Black Ball Lock Disconnects Duotight fittings for all connections Kegland Part Number: KL15905    

Read more less

This bottle brush design has stood the test of time.   This traditional design Beer Bottle Brush, is perfect for cleaning 12 to 22oz beer bottles. If there is any stuck-on residue or dust in the bottom of your bottles the rounded end of the brush will reach in and scrub it out!    Includes circular metal loop for hanging.    Bristles are 2.75" in diameter with an overall length of 16"

Read more less

Tired of mixing large batches of sanitizer for small jobs? This 8 oz Sanitizing Spray Bottle is the answer!    Great for a quick spray on hands, fermenter valves, sample takers, etc. either before or immediately after use.    Add 1/2 tsp (2 ml) of Star San or Iodophor sanitizer and fill with water. Sanitizer will last up to 1 week before it is ineffective.

Read more less

The first time a brewer tries out the FastRack bottle drying rack system they always say the same thing to themselves: “That is a thing of beauty!”   The FastRack bottle drying rack is the easiest way to drain, stack, and store your empties!  When bottling, use the FastRack to hold your bottles after sanitizing, and have them ready to fill with your delicious homebrew!  The FastRack takes up far less space than a bottle tree. This is a very sturdy system, and even when stacked over 4 levels tall, maintains stability!  Works for standard bottles as well as swing tops.   We sell the Fast Rack components independently, or in a handy combo pack of 1 Tray and 2 Racks.   2 FastRack Racks will hold 48 x 12 oz bottles, a full 5 gallon batch!   Compatible with 12oz bottles only.   Lowest Price Guarantee, this item has MAP pricing so you can be confident you won't find it for less.

Read more less

Two brushes in one! Get twice the use from one brush!   This dual ended brush is designed for cleaning both your faucet and commercial tap. Cheers to one less piece of equipment to track down on Draft-Cleaning-Day. Now you can get your lines re-connected & flowing again faster. We’ll drink to that!

Read more less

If you have spent uncounted hours washing and sanitizing bottles on bottling day, then you know what a drag that can be. Save time and simplify your life by making this tool a regular part of your bottling process. Simply add some sanitizing solution the the clear dish section of the injector, then place a bottle upside down one the white nozzle and pump it a few times to spray sanitizer inside the bottle. The nozzle provides the correct spray pressure and coverage to fully coat the inside of the bottle in just a few pumps. Able to be installed on top of our Ferrari brand rotating bottle trees (B510 or B517), or used separately on the countertop. It only takes a few minutes to sanitize 2 cases of bottles, letting you get on with bottling and then the rest of your day! Please Note: Does not fit other brand bottle trees or on the Ferrari fixed based tree with handle (B518).

Read more less

Line brushes make quick work of build-up and deposits on the inside of your tubing that would otherwise be unreachable. Clean tubing is essential to preventing infected beers!   This 3/8“ x 48” line brush is flexible and easy to use,great for cleaning 3/8" transfer tubing.

Read more less

A perfect size, food-grade, bucket that is a perfect fermenter for doing 1 gallon fermentations. Ideal for your next small batch of homebrew or fruit wine. Also a great container to store grain in. Wide opening allows for easy cleaning.  Lid sold separately. 9-1/4" H x 9-1/2" D (without lid) 9-7/16" H x 9-15/16" D (with lid)

Read more less

The first time a brewer tries out the FastRack system they always say the same thing to themselves: “That is a thing of beauty!”   Because it’s made to hold wine bottles, the FastRack Wine Bottle Drying Rack & Storage System is just the right size for your 22oz beer bottles! It is the cleanest way to drain, stack, and store your empties. When bottling, use the FastRack to hold your bottles after sanitizing, and have them ready at hand to fill with your delicious homebrew!  The FastRack Wine takes up far less space than a bottle tree.   We sell the Fast Rack in a handy combo pack, consisting of 1 Tray and 2 Racks, which is perfect for a 5 gallon batch. We also sell the individual components for larger batches and storing more cases!    Each FastRack Wine Rack holds 12 x 22 oz (or 750 ml) bottles.   Lowest Price Guarantee, this item has MAP pricing so you can be confident you won't find it for less.

Read more less

Mark’s Mark II Keg Washer™ is designed to clean and sanitize large vessels like cornelius kegs and carboys. This keg cleaner is also intended to provide a sanitation container for miscellaneous items such as airlocks, thermometers, tubing, keg fittings, and more. Quiet, Fun, & Easy to Use Very quiet when in use and most importantly speeds up the process of cleaning and sanitizing.    Light in weight.  Easy to store.  Cleans Kegs This keg washer cleans and sanitizes a cornelius keg without having to take apart the ball lock fittings, poppets, and dip tubes. You can clean the keg and the dip tube simultaneously using the T adapter. Cleans Tubing Too Cleans tube separately utilizing the pump with the additional barb fittings included.  Cleans Parts Reservoir holds 1.25 gallons of water making it easy to fill and empty with sanitizer.     Saves water and sanitizer.  The keg washer does not have an on/off switch, you can plug it directly into a wall outlet to operate the pump or plug it into an outlet that is controlled by a switch. Never leave the keg washer unattended when in use. When in use, fill the keg washer up to about 1 inch under the brim. The pump is not self priming, so always make sure the basin is full of water before plugging in the pump. Owner's Manual is included. Please read thoroughly before using. Dimensions of the inside of the washer's reservoir are: 6"L x 12"W x 4"D. Please Note: Product does not include the bucket, carboy, or keg pictured above for display purposes. The pump specs are: 520 GPH 120 Volts AC 40 watts Ceramic shaft, impeller  

Read more less

These are a great add to any brewery.  Overly long so as to cover the entire forearm for reaching into sanitizer buckets, these gloves will protect you from all brew day hazards!  These will help reduce the risk of getting burned or scalded by your brew, and keep caustic cleaners and sanitizers away from your skin! 

Read more less

Line brushes make quick work of build-up and deposits on the inside of your tubing that would otherwise be unreachable. Clean tubing is essential to preventing infected beers!   This 1/2“ x 48” line brush is flexible and easy to use. Great for cleaning 1/2" transfer tubing, especially if the line was used with a carboy hood as a blow off.

Read more less

Bottle washers make clean up and bottle maintenance much easier to deal with!  Using one of our bottle washers is definitely the fastest way to clean bottles and carboys. Works great on build up!   Our stainless bottle washer creates a jet-style stream that penetrates build-up in bottles or carboys. It is automatically activated when a bottle is pressed down onto the unit. Female hose thread connection.

Read more less

Makes managing sanitized bottles for a whole batch easy, and lets you get the bottling mess out of the kitchen--no more using the dishwasher rack to hold sanitized bottles. The Rotating Bottle Tree holds 45 bottles. It will simplify the bottling process. Just rinse the bottles out well after use and store upside down on the bottle tree where they remain clean. When you want to bottle, use the optional Sanitized Injector (B520) to spray sanitizing solution, such as Star San or SaniClean, into the bottles to sanitize. Wait 1 minute and bottle. You can also do the sanitizing ahead of time and let the bottles air dry upside down. Made by Ferrari Group in Italy.

Read more less

Easily connects the Bottle & Carboy Washer (CE10) to most kitchen sink faucets. Stainless steel construction.   Comes with two washers. For outside threaded faucets use adapter with only one washer; for inside threaded spout use both washers. Simply unscrew the screen assembly at the end of your faucet and screw the adapter in place.   Bottle & Carboy Washer sold separately.  

Read more less

Another great invention coming out of Ss Brewtech, the Keg WaSsher! This is a hands free, clean in place keg washer that will make cleaning kegs one of the easiest steps of the brewing process. Gone are the days of disassembling your keg to clean it. The cleaning process is pretty simple. Just take the keg lid off, attach the keg washer, attach both ball lock QDs, stick the whole thing upside down in a bucket full of sanitizer, turn on the pump and your keg is clean. The Keg WaSsher is designed to fit in a standard 5 gallon bucket. It also only uses 2 gallons of cleaning solution resulting in less chemical waste and evironmental impact. If you want to get fancy, you can set up a wash station with 3 buckets to perform an initial cleaning, fresh water rinse, and sanitizer. All you have to do is lift the whole apparatus from one bucket to the next! Features: Hands free operation Chemical resistant submersible pump Attaches to common ball-lock Cornelius-style kegs w/ removable lids Powerful CIP spray ball Entire assembly fits in 5-gallon bucket Cleans inside of keg and ports simultaneously Easily attaches/detaches from kegs Perform clean, rinse, and sanitize steps all with the same unit

Read more less

You clean your equipment to remove bacteria. Make sure the tool you’re doing it with doesn’t leave scratches that actually promote bacterial growth!   These pads are made of soft, woven fibers making them ideal for equipment cleaning. They are tough enough to scrub off scum and debris without scratching most surfaces. These scrubbers are the best choice for cleaning stainless steel. Also good for chrome, copper, porcelain, glass, and plastic!    9" L x 6" W x 1/4" thick. Sold in packs of three.

Read more less

Got built-up sediment inside your narrow-mouthed glass carboy? Luckily there’s a brush designed to reach the bottom and sides of your fermenter. The bent head of the brush makes short work of cleaning the krausen (foam on top of beer) after fermentation. This brush is made with stainless steel so you won't have any rusting issues like with other carboy brushes. Note: This brush is not recommended for plastic carboys as the metal bristle attachment can scratch the plastic. Dimensions: 26" from end of handle to 90 degree bend. Bristles are approximately 1-1/4"" in length.  

Read more less

This L-shaped brush is the perfect tool for scrubbing every inch on the inside of carboys, and thanks to the plastic coating, they're also safe to use with plastic fermenters and PET carboys. Normal carboy brushes like our CE40 are great for cleaning glass carboys, but can be a risky choice for using on plastic. The metal rod where the bristles attach can scratch plastic, creating hide outs for bacteria. You won't have those worries with this carboy brush! Bristles made from Food Grade nylon Long enough to reach deep inside large carboys L-shaped bend allows you to easily scrub off leftover krausen residue Height from end of handle to 90° bend - 21.5" Brush section with bristles is 8.5" long Bristles are 2.75" in diameter Temperature rated to 140°F (60°C)  

Read more less

12-seat 2-in-1 Bottle Washer compatible with popular beer, wine, and PET bottles when paired with the appropriate bottle tray Garden hose adapter included to easily rinse bottles or purge them of oxygen with the Gas Purging Adapter Stack up to 4 trays of matching bottles while drying The Vintage Shop has been a pioneer in the manufacturing of products for the home wine and beer industry since 1969 Pair with either the Glass Bottle Tray or PET Bottle Tray (sold separately) Cleans dozens of bottles quickly! Imagine a system that lets you sanitize bottles 12 at a time, temporarily store them while they drain upside down, and then flush them with inert gas prior to filling. This bottle rinsing base and rack system is your dream come true! The base portion of the system connects to a water supply for rinsing or to your inert gas system for purging/flushing. In our ideal plan you have two bases. One is used for rinsing, the other, sitting right next to it, is used for purging. You can put the rinsing base in a tub that is re-circulating with sanitizing solution (such as: CL27) or just drain to the ground if you are working outside. *Note: Bottle Racks are sold separately. You will need to buy as many racks (CE971) as needed. Each rack holds 12 bottles. Comes with a female garden hose fitting attached to a plastic 1/2" barb fitting on the unit.   12.25" L x 10.75" W x 3" H Max Temp: 167° F (75° C)

Read more less

Scrub your beer bottles clean with this bottle-shaped brush. Soak bottles in your preferred cleaning solution, scrub the inside with the bottle washing brush, and rinse. 17.5" long. Bristle section is 12" long. Kegland Part number: KL12997

Read more less

12-seat bottle tray designed for glass beer & wine bottles to be used with The Vintage Shop 2-in-1 Bottle Washer Use with the 2-in-1 Bottle Washer to rinse bottles or purge them of oxygen with the Gas Purging Adapter Stack up to 4 trays of matching bottles while drying Swing top bottles will fit after removing the wire swing top The Vintage Shop has been a pioneer in the manufacturing of products for the home wine and beer industry since 1969 Fits most sink sizes and popular glass bottles Please also read description for CE970 as this is a two part kit. An awesome way to have your bottles ready to go! This rack will have your bottling session running smoothly, with as little handling as necessary.  Load up to 12 bottles upside down at one time. These racks then sit down on the base to either rinse or gas flush the bottles, depending on what you have hooked up to the base (water or inert gas.) Will hold a wide variety of bottles. Swing top bottles will fit if wire swing top is removed. 15.25" L x 11" W x 4 5/8" H Max Temp: 167° F (75° C)

Read more less

Copper scrub pads are great for cleaning stainless steel equipment, and can also be used as packing material for pot or reflux stills to enable the release of sulfides. Made from pure lead-free copper.   Kegland Part number: KL08907  

Read more less

Perfect for spraying down brewing equipment with dissolved cleaners or sanitizers Attach the optional Ball Lock Keg Post Adapter to convert the sprayer into a line cleaning device Empty the large 33.8 oz tank up to 30 times on a single charge The Power Sprayer is a fantastic multi-purpose device that can be used for spraying down your brewing equipment with cleaners and sanitizers or converted into a pressurized line cleaning system. The tank features graduated volume markers and can be emptied up to 30 times on a single charge. The nozzle knob can be adjusted to turn the stream into a fine mist or a powerful jet. This product is made from food grade Santoprene, PP, PE, Silicone and stainless components. Battery Life The pump has large 18650 li-ion rechargeable battery. On a full charge the battery will empty the tank 18-30 times so it lasts for ages. If you use fine mist it will be closer to 18 times but if you use a jet/stream the battery will last closer to 30 times. Includes: 33.8 oz Reservoir Tank Power Sprayer Nozzle and Dip Tube White Plastic Adjustment Head Sprayer 6" USB-C to Standard USB Cable *Does not include USB wall charger KegLand Part Number: KL40860

Read more less

With the FastWasher bottle washer you can clean and sanitize your bottles with ease! Simply place your bottles on the rack, lower the Fast Washer into a tub of sanitizer or clean water, turn it on and it does the rest! The FastWasher uses a 530 GPH submersible pump to shoot water or sanitizer up the neck of the bottle to make contact with the entire interior surface. The FastWasher holds 12 bottles at a time. Perfect for use with 22 oz "Bomber" beer bottles or 750 ml wine bottles. Also compatible with 12 oz and swing top bottles. Due to the presence of water, we highly recommend using a GFCI outlet adapter with the FastWasher. Check out the E100 below under "You Might Also Need". The FastWasher is meant to be used alongside the FastRack Bottle Drying Rack & Storage System. The FastWasher does not include the bottle rack pictured on the box. If you do not have the FastRack, you can purchase the bottle rack piece separately (B535R). The FastWasher requires a tub to operate correctly, which is not included. The recommended tub size is 20" x 16" x 8" or larger.

Read more less

Keeping your equipment clean and sanitary is the first step toward brewing a fantastic beer, but the number of products to choose from can make your head spin. That's why we put together a basic cleaning and sanitizing kit to set novice brewers on the path to success. Star San Star San is an acid based sanitizer that is quick, odorless, tasteless and safe for most materials except softer metals. Use of 1 oz per 5 gallons of water and a contact time of 1 minute makes Star San very economical and convenient. Craft Meister Alkaline Brewery Wash Does your cleaner power through dirt in cold water? Craft Meister Alkaline Brewery Wash does! This versatile and powerful brewery cleaner dissolves quickly and cleans rapidly in cold water in addition to hot water. Ideal for overnight soaking as the solution does not lose effectiveness over time like oxygen based cleaners such as Oxi Clean. Craft Meister Alkaline Brewery Wash will not leave a white chalky film on your equipment like most oxygen based cleaners and rinses away with ease. Spray Bottle A bucket full of sanitizer is great for soaking equipment, but not every job requires that much solution. This 8 oz Sanitizing Spray Bottle is the answer! Great for a quick spray on hands, fermenter valves, sample takers, etc. either before or immediately after use. Add 1/2 tsp (2 ml) of Star San with the plastic syringe and fill with water. Sanitizer will last up to 1 week before it is ineffective. Plastic Syringe The syringe is used to easily measure out 2 ml of Star San for the spray bottle. Kit Includes: Star San - 16 oz (CL26E) Alkaline Brewery Wash - 1 lb (CL41A) Plastic Syringe - 10 ml (MT118) Spray Bottle - 8 oz (CE96)

Read more less

If you want to keep your draft faucets clean, you’ll dig this special brush dedicated specifically for the job. This brush is the right diameter to give the interior of your faucet a good scrub, and short enough to avoid being unwieldy.    Ah, there’s nothing like the right tool for the job.   About 3/4" diameter.

Read more less

Converts the KegLand Power Sprayer into a compact, convenient line cleaning device Ball Lock multi-post is compatible with both Gas & Liquid QDs Attach the Ball lock Keg Post Adapter to the KegLand Power Sprayer to turn the unit into a convenient line cleaning device. The multi-post is compatible with both Gas & Liquid ball lock quick disconnects. This part is only suitable for the Power Sprayer. It is not a standard thread size. It has been custom made for this product and this product only.   Please Note: The keg post adapter does not include a spring & poppet. This is intentional in order to prevent the flow path from being blocked if the sprayer was unintentionally powered on without a ball lock disconnect connected to the post. Powering the sprayer with the flow path blocked could damage the pump. KegLand Part Number: KL42871

Read more less

CIP (clean in place) is a commonly used technique to clean large craft brewing vessels. At Ss, we've taken the same principles used in our pro fermenters and scaled the design down for homebrewers to speed up their cleaning process and improve their sanitation practices, just like craft breweries. 304 Stainless steel construction 3" TC 1/2" MPT fitting Recommended to use with the 1/2" Hose Barb 2 bar / 29 psi / 7 gpm flowrate recommended Does not include TC clamp or gasket Pro version has a larger spray ball designed for larger pumps (17 GPM) and vessels 1BBL and larger.

Read more less

This clean in place spray ball from Ss Brewtech attaches to a 1.5" tri clamp to clean the inside of whatever container you attach it to. Has a 1/2" MPT and made from 304 stainless steel. The attachment is 2.5 in. long and 0.75 in. wide. 1.5" tri clamp gasket and clamp not included. A pump capable of 29 PSI minimum is recommended for this product. Does not fit Chronical BME, Chronical 2.0, or Unitanks.  

Read more less

Italian-made wine bottle brush. You might like this design because it has a tuft on the end that is good at getting the corners of your bottles.  Customers also like this brush for the easier entry and exit into the bottle neck compared to other brushes. Plastic handle is a little easier to grab as well. Made in Italy 18" long x 2.25" Diameter. 

Read more less

You love your Carboy Cleaner so much that you’ve worn out the cleaning pads!   A set of replacement pads and washers for The Carboy Cleaner™. The ease and convenience of the Carboy Cleaner can’t be overstated. After you’ve used it to clean enough carboys and kegs, you will need to replace the cleaning pads.   Set of 2 replacement pads and 4 washers for The Carboy Cleaner™.

Read more less

With the FastWasher bottle washer you can clean and sanitize your bottles with ease! Simply place your bottles on the rack, lower the Fast Washer into a tub of sanitizer or clean water, turn it on and it does the rest! The FastWasher uses two 530 GPH submersible pumps to shoot water or sanitizer up the neck of the bottle to make contact with the entire interior surface. The FastWasher holds 24 bottles at a time. Not recommended for use with larger sized bottles, as you won't be able to fit a bottle into each slot. Any slot not holding a bottle will shoot water freely and create quite a mess! If you're looking for something to clean your 22 oz "Bomber" bottles, check out B540. Due to the presence of water, we highly recommend using a GFCI outlet adapter with the FastWasher. Check out the E100 below under "You Might Also Need". The FastWasher is meant to be used alongside the FastRack Bottle Drying Rack & Storage System. The FastWasher does not include the bottle rack pictured on the box. If you do not have the FastRack, you can purchase the bottle rack piece separately (B530R). The FastWasher requires a tub to operate correctly, which is not included. The recommended tub size is 20" x 16" x 8" or larger.  

Read more less