Pump Fittings & Accessories

This Stainless Steel MPT barb will connect any tubing with a 3/8" ID line to any fitting with a 1/2" FPT connection. Most commonly used to connect tubing to a ball valve. Great for brewers who want to upgrade the fittings in their brewery to stainless steel. A high quality fitting with no sharp burs around the edges.   Made from 304 Stainless Steel.

Read more less

Use this fitting for connecting tubing directly to your pump. 1/2" FPT on one side, with a 1/2" barb on the other. If you are not using a QD Set or a ball valve, this is a handy piece of stainless for a direct connection!

Read more less

304 Stainless steel, full port, two piece ball valves that will last for years. Easy to clean with 1/2" FPT on input and output.. High grade 304-stainless made to last with1000psi rating. We've been selling these same valves from the same manufacturer for over 10 years. This is non-locking valve meaning that it does not come with the locking clip. Many users prefer this because you are not constantly lifting the clip to open and close the valve. If you would prefer a ball valve with a locking clip please see the Brewbuilt Ball Valve.  TIP: You can take a ball valve apart using two crescent wrenches. This will allow you to open up the valve to get to the ball and the two PTFE gaskets that form the seal when closed.

Read more less

This BrewBuilt Stainless Steel Ball Valve features a locking mechanism that keeps the valve from being opened by a child or passing dog while you are brewing.  Easy to clean 2 piece design, constructed from high grade 304-stainless made to last. 1/2" FPT on input and output side. TIP: You can take a ball valve apart using two crescent wrenches. This will allow you to open up the valve to get to the ball and the two PTFE gaskets that form the seal when closed. Features: 1/2" FPT on inlet and outlet Locking Mechanism on Handle 304 SS construction with PTFE gaskets Two-Piece Construction for easy cleaning Full Port design for minimal pressure loss / resistance BrewBuilt: Designed for Brewing, Built to Last.

Read more less

Full Coupler with 1/2" Female Pipe Thread. Full couplers have threads for insertion from both sides. 304 stainless. Also used to connect fittings. We use with our polysulphone brewing pump, H315 to connect other fittings like quick disconnects. Length is approximately 1.5" Max pressure rating of 150 psi.

Read more less

With three places to attach tubing and accessories, this tee gives you the ability to customise your brewing setup.   304 Stainless, 1/2" Female Pipe Thread on all three openings.   2" length x 1.5" width

Read more less

A stainless steel nipple used to combine two fittings with 1/2" FPT threads.  There is a 1/2'' space between threads.

Read more less

Upgrade your MKII pump with a 304 stainless steel replacement head. Stainless steel is more durable if you are attaching ball valves. Very occasionally the threads on the plastic head that comes standard on the MKII can break if you are using hard to close ball valves that apply a lot of torque. Stainless steel is very robust and will not break, is food grade, and well... stainless. Before you snag the stainless center-inlet head, also consider the stainless inline tri-clamp head. Kegland Part Number: KL03865

Read more less

For Insertion into a ball valve for connecting 1/2" ID line. Made from 304 type stainless steel.   Please note: If using 1/2" ID vinyl tubing, we recommend using hot water to heat the tubing up for easier insertion. Not recommended for use with thick wall 1/2" vinyl tubing. 

Read more less

Use this barbed fitting with our 1/2" ID Silicone tubing for a better fit. Because Silicone tubing is soft and flexible it actually fits much better on this over sized 5/8" OD barb than on a 1/2" OD barb. Designed and made by MoreBeer! to maximize flow this fitting is also perfect for use when a March or Chugger High-Flow pump as it allows a larger volume of wort to enter the pump, decreasing instances of cavitation. Please note: If using 1/2" ID vinyl tubing, we recommend using hot water to heat the tubing up for easier insertion. Not recommended for use with thick wall 1/2" vinyl tubing. 

Read more less

Replacement O-ring kit for Blichmann RipTide™ pump.  

Read more less

Replacement impeller for Blichmann's Riptide Brewing Pump.

Read more less

This stainless steel ball valve is the perfect match to most homebrewing kettles with a 1/2" coupler or nipple on the bottom.  The 3-piece design makes it easy to take apart and keep clean, preventing any spoilage organism from lingering between batches.  It has a 1/2" FPT inlet and outlet.

Read more less

Stainless steel elbow with a 1/2" FPT inlet and 1/2" FPT outlet. Max pressure rating of 150 psi.

Read more less

A replacement o-ring for our March magnet drive pumps and Chugger pumps. Compatable with the following SKUs: H315HF, H332, H331, H375, H320, H350.

Read more less

This white plastic swivel fitting is made by Shurflo, manufacturers of our popular H305 Self Priming Diaphragm pump, and is designed specifically to fit with this pump. Features a 1/2" Barb x 1/2" Female Thread swivel fitting, which makes disconnecting your hoses from the pump a snap. Made from NSF Food Grade polypropylene.

Read more less

Replacement gasket for the 25 watt MKII High Temp Magnetic Drive Pump - PMP500. KegLand Part Number: KL33565

Read more less

Replacement O-ring for RipTide™ brewing pump  

Read more less

Replacement silicone o-ring for the Chugger stainless pump head. H332 H332X H333 H334 H335 H336 Compatible with the following Chugger pump models: CPSS-IN-1 CPSS-IN-2 CPSS-CI-1 CPSS-CI-2 CPPS-IN-1 XCPSS-CI-1 XCPSS-IN-1 TRI-XCPSS-CI-1 TRI-XCPSS-IN-1

Read more less

A replacement or spare Pre-Filter for the H308 diaphragm pump. The redesigned pre-filter is easier to remove and reattach with the need for tools, and fully disassembles for cleaning. Fully compatible with pre-2020 Super Transfer pumps that came with the original pre-filter.

Read more less

Having your pump securely mounted where you want it gives you a more stable unit that is easier to control.   With this stainless mounting bracket you can mount your pump right where you want it in your brewing setup. It has two pre-drilled holes so you can attach it to a brewing stand, cart, etc. After you have secured the mounting bracket you can easily slide your pump into place and remove it when you're finished, if desired. Keep your brew system tidier during brewing by giving your pump a dedicated mount to keep it out of the way.   Fits our Chugger Pumps (H331 and H332).  

Read more less

Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. Replacement impeller for our H325, H327 & H328 March Nano Pumps.

Read more less

A replacement pump head for the H308 diaphragm pump, should the diaphragms become worn or get damaged by passing particulate matter through them. Please Note: This pump head does not include the Pre-Filter or the Elbow fittings that are connected to your hoses, those will need to be transferred over from the existing pump head or purchased separately.

Read more less

A larger impeller than what comes in the standard "809" pump. These help to prevent cavitation in the pump head. Designed for our old H315 and new H315HF pumps. Will also fit and improve H350 and H375 pump heads.

Read more less

The redesigned quick disconnect pre-filter for the H308 Super Transfer pump now features a replaceable filter screen. Pick up a replacement or keep a spare on hand. When your filter mesh screen is past its prime, simply replace the screen rather than replace the whole pre-filter. Please note: this filter screen will only work with the current generation pre-filter. If you purchased the Super Transfer pump before 2020 and have the original pre-filter, you will need to upgrade to the newest version (H308C) to be compatible with this replacement mesh screen.  

Read more less

Transfer the clearest beer possible from first pint to last with the Super Sucker Filtered Racking Buoy! Stainless steel float allows you to pull liquid from the top of your vessel rather than transferring out from the bottom Sediment falls out of suspension over time, especially at cold temperatures, so the clearest beer is always at the top! 10 feet of tubing can be cut to your preferred length for both the pump inlet and outlet Made for use with the Super Sucker Transfer Pump The Filtered Racking Buoy kit allows you to transfer the clearest liquid possible with the Super Sucker Transfer Pump. Whether you're transferring beer or wine, the clearest liquid will always be at the top of the vessel as solids fall out of suspension and settle to the bottom over time. The stainless steel float will position your transfer tubing at the top of the liquid so you can pull from the top down and cease transferring when you get near the sediment. The filter attachment will add a layer of protection for the pump and will leave solids behind in your fermenter or storage tank. Includes: Stainless float (1.75" Ø) Filter attachment 10' length of 3/8" ID silicone tubing (3) hose clamps

Read more less

A replacement head that fits either the H315 or H315HF Polysulphone pump. This is only the plastic head, no impeller.

Read more less

Stainless steel barb adapter for 1/4" female pipe thread connections. For use with 3/16" or 1/4" ID tubing. Pack of 2.

Read more less

Stainless steel barb adapter for 1/4" femaile pipe thread connections. For use with 1/4" or 5/16" ID tubing. Pack of 2.

Read more less

Replacement elbow fitting for the H308 diaphragm pump. This fitting is typically only used on the pump outlet, but can also be placed on the inlet in lieu of the Pre-Filter. Please note that doing so puts the pump head at increased risk of damage from particulate matter.

Read more less

Replacement stainless steel pump head for the 65-watt MKII Pump (PMP502). 3/4" BSPT ports. KegLand Part Number: KL03872

Read more less

Replacement Feet for H308 Super Transfer Pump.

Read more less

This is a replacement assembly for our H315HF pump. It has the polysulfone head and the impeller as well. This unit is set up with the new impeller, and will replace the head of an H315HF unit, or upgrade an older H315 to the High Flow model.

Read more less

Full Coupler with 1/2" Female British Standard Pipe Parallel Thread. Full couplers have threads for insertion from both sides.

Read more less

Replacement impeller for the Chugger X-Dry Series pumps - H332X, H334, H335, H336. Also backwards compatible with the classic series H331 Chugger Pump. 

Read more less

Replacement plastic pump head for the MKII High Temperature Magnetic Pump (PMP500). If you're replacing a broken head on your MKII pump, also consider these stainless steel upgrades—standard stainless center inlet head or stainless inline tri-clamp head. Kegland Part Number: KL13536

Read more less