Brew Pump - Hot Side

Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this item to you when we receive more in late November.   Stop lifting buckets, kettles, and fermenters or relying on gravity for transfers! Brew pumps unlock a world of brewing processes otherwise unavailable—create a return loop for whirlpooling in kettle during post boil hop additions Stainless steel pump head comes standard—the ideal choice for attaching quick disconnects, camlocks, and other stainless fittings Built-in flow control valve allows for direct flow adjustment on the pump head and eliminates the need to add an additional ball valve Corny keg style pull ring PRV makes it easy to bleed the pump head of air bubbles and prime the pump Tri-clamp pump head can be rotated to your preferred orientation and disassembles quickly for cleaning between uses Imagine a brewing pump that eliminates cavitation, is easy to clean, has a built in valve, and is quiet. Introducing The RipTide pump from Blichmann Engineering, the first pump designed specifically for homebrewing. We love this brew pump. Like a brewer wired on coffee, let us rattle off some of our favorite features.  First, the pull style relief valve that allows air to exit the pump head so the impeller won't cavitate is a genius addition. Our next favorite feature is the bad-ass, built-in flow control valve so you don't have to add additional ball-valves. While we dont manually clean our pumps very often we like the idea that we can easily do that with the clover clamp style connection. That might be particularly important if you are transferring cool wort where extra sanitation might make a difference.  Equally cool is the noise, or lack thereof, when operating. It just wears on you to hear your pump grinding away all day. The RipTide pump isn't silent, but it is much quieter.  And to top it all off we like the mounting base and the extra long 9' cord. 9' gets the plug connection a few feet away from where we are brewing and less likely to be exposed to water - a simple upgrade that is really nice.  Oh, and we almost forgot the power switch which is always a nice feature on something electric! All in all this is a no brainer upgrade for the difference in cost. Features: Strong rare earth magnets and a curved blade impeller provide 7 GPM and up to 21 ft of lift Tri-Clamp head disassembles easily for cleaning 1/2" NPT inlet and outlet Motor is enclosed in a splash proof and super quiet case Rotatable stainless steel head Integrated air release vent allows you to easily prime the pump everytime without those frustrating air bubbles and cavitation Linear flow valve provided for excellent flow control Power switch on base 10 ft. long power cord with 120V plug

Read more less

This magnetic drive pump is a perfect pump for your brew system. Use it to move hot wort in an all-grain system and also to transfer wort from boil kettle to fermenter. The housing of the unit is made from tough, food grade food-grade heat-resistant SPS. The magnetic drive allows you to slow down the flow without damaging the pump. This pump is not self priming so do not run the pump dry. The pump head can be rotated in 60-degree increments, allowing for 6 different pump head orientations. Optional stainless steel pump head upgrades available—standard stainless center inlet head or stainless inline tri-clamp head. Want More! power? Check out this pump's bigger brother, the 60-Watt MKII. Features: 110v/60hz Max Head: 11.15 ft. (3.4 m) Max Flow: 5 Gal/min (19L/min)  1/2" BSP fittings Rotatable pump head Max temperature - 248 F/ 120 C Water resistant (not proof!) casing Kegland Part Number: KL05470

Read more less

Introducing the X-Dry Series Chugger Pumps! These pumps offer the same great quality we've come to expect from Chugger, but now feature Run-Dry Protection. Although the Chugger still needs to be primed before each use, the X-Dry Series offers a new level of protection from damage due to cavitation. The Chugger lineup of pumps represents a great value for an even better price. These pumps are workhorses in the brewery. Featuring a robust flow rate of 7 gpm, and a magnetic drive designed to handle back-pressure, these pumps are a great addition to any brewing setup! The Stainless Steel Chugger showcases their molded Stainless Steel Pump Head. This stainless pump is a steal for the price, and we've been more than happy with the quality! Use this to ease transfers between kettles, cool wort via a counterflow chiller, or recirculate icewater for quicker chilling! The Chugger pump model has 1.5" tri-clamp inlet and outlet, allowing easy integration with your T.C. kettles or fermenter! We recommend setting these pumps up with a butterfly valve on the outflow side, this way you can throttle down the outgoing flow rate, allowing for more efficient sparges or cooling! The pump head can also be rotated 360° (in 90° intervals) allowing for even more customization! Features: Run Dry Carbon Bearing Stainless Steel Center Inlet Pump Head Food Grade up to 250° F 1.5" tri-clamp inlet and outlet High Flow rate of 7 gpm Max Head 18.6 ft 115v 55" cord and plug attached 50/60 Hz, 1.4 amp 1/20 HP, 3500 RPM Note: When using silicone tubing, we recommend using a slighlty larger barb than the I.D. of the tubing. This is because silicone tubing tends to have greater pliability than most tubing. For example, when using 1/2" silicone tubing, we recommend our 5/8" barb (H620), to help ensure a better seal!  

Read more less

Introducing the X-Dry Series Chugger Pumps! These pumps offer the same great quality we've come to expect from Chugger, but now feature Run-Dry Protection. Although the Chugger still needs to be primed before each use, the X-Dry Series offers a new level of protection from damage due to cavitation. The Chugger lineup of pumps represents a great value for an even better price. These pumps are workhorses in the brewery. Featuring a robust flow rate of 7 gpm, and a magnetic drive designed to handle back-pressure, these pumps are a great addition to any brewing setup! The Stainless Steel Chugger showcases their molded Stainless Steel Pump Head. This stainless pump is a steal for the price, and we've been more than happy with the quality! Use this to ease transfers between kettles, cool wort via a counterflow chiller, or recirculate icewater for quicker chilling! This Chugger pump model has 1/2" mpt inlet and outlet, allowing easy configuration for any application! We recommend setting these pumps up with a Ball valve on the outflow side, this way you can throttle down the outgoing flow rate, allowing for more efficient sparges or cooling! The pump head can also be rotated 360° (in 90° intervals) allowing for even more customization! Features: Run Dry Carbon Bearing Stainless Steel Inline Pump Head Food Grade up to 250° F 1/2" mpt inlet and outlet High Flow rate of 7 gpm Max Head 18.6 ft 115v 55" cord and plug attached 50/60 Hz, 1.4 amp 1/20 HP, 3500 RPM Note: When using silicone tubing, we recommend using a slighlty larger barb than the I.D. of the tubing. This is because silicone tubing tends to have greater pliability than most tubing. For example, when using 1/2" silicone tubing, we recommend our 5/8" barb (H620), to help ensure a better seal!  

Read more less

Please note: the example images show an AU style 220V plug. This unit comes with a standard US 3-prong 110V plug. Updated images coming soon. The "Big Brother" to one of our best-selling pumps! Expect the same quality that customers have come to expect from the MKII Pump (PMP500) but with more power. This 65 watt magnetic drive pump is powerful enough for homebrewers and micro brewers alike. Use it to move hot wort in an all-grain system and also to transfer wort from boil kettle to fermenter. The pump head is made from 304 grade stainless steel with 3/4" threaded ports that can easily be converted to tri-clamp. The magnetic drive allows you to slow down the flow without damaging the pump. This pump is not self-priming so do not run the pump dry. The pump head can be rotated in 60-degree increments, allowing for 6 different pump head orientations. We recommend adding two 1.5" T.C. x 3/4" Female BSPP adapters to the ports. From there you can use a ForgeFit 1.5" T.C. x Male QD to use quick disconnects with your lines, or convert to your preferred tri-clamp fittings. Features: 110V / 60hz Max Head: 15-21 ft. Max Flow: 13.5 Gal/min Max Temp: 248°F (120°C) Rotatable 304 stainless steel pump head 3/4" BSPT fittings Water resistant casing KegLand Part Number: KL05487

Read more less

The RipTide™ (Tri-Clamp model only) has been taken to the next level with a design modification to be the ultimate work horse. Now it eliminates the easy-to-loose thrust washer and showcases a PRV vent barb that will allow for mess free priming. This version will improve the overall brewing experience and operation. Again, this change is currently only on the TC RipTide™. Gone are the days of  making do with a general purpose pump such as the March 815 and all the variant imported copies.  These pumps are cumbersome to disassemble, difficult to prime to get the wort moving, require the addition of a valve, a switch, and a proper base to hold the pump upright.  They also use noisy open motors that must be shielded from liquids.  All undesireable attributes for a homebrewing pump!  The team of homebrewers at Blichmann Engineering and our friends at March Manufacturing have created the RipTide™ to solve all of these problems! High performance curved blade impeller and strong rare earth magnets deliver 7 GPM and up to 21ft of head pressure! Carbon Fiber Dry Run Protection increases the life of your impeller and resists damage during accidental dry runs Tri-clamp head connection fully disassembles in seconds for easy cleaning 1.5" tri-clamp inlet and outlet connections Totally enclosed motor is splash proof and super quiet (50 dB) Integral linear flow valve for superior flow control - don't spend more money for a separate valve and fittings. Integral air vent valve and partially enclosed impeller design allows you to prime the pump in seconds - no more frustrating air locked pumps! Stainless steel head rotates 360 degrees to fit in virtually any installation Large stable base with protective rubber feet keeps the pump from tipping Convenient power switch on the base Includes a 10ft long cord with plug (120V) Base acts as a cord wrap for convenient storage Assembled in USA from USA and imported components

Read more less

The small batch brewers dream pump! The Anvil Brewing Pump is perfect for recirculating and transferring wort. Features: Tool-free Disassembly Quiet Operation In-line Switch 6 ft. Cord Sized for 1/2 in. Hoses Max Flow - 3 GPM Max Lift - 7 ft Voltage - 120V 60Hz Current - 0.75A  

Read more less

Introducing the X-Dry Series Chugger Pumps! These pumps offer the same great quality we've come to expect from Chugger, but now feature Run-Dry Protection. Although the Chugger still needs to be primed before each use, the X-Dry Series offers a new level of protection from damage due to cavitation. The Chugger lineup of pumps represents a great value for an even better price. These pumps are workhorses in the brewery. Featuring a robust flow rate of 7 gpm, and a magnetic drive designed to handle back-pressure, these pumps are a great addition to any brewing setup! The Stainless Steel Chugger showcases their molded Stainless Steel Pump Head. This stainless pump is a steal for the price, and we've been more than happy with the quality! Use this to ease transfers between kettles, cool wort via a counterflow chiller, or recirculate icewater for quicker chilling! The Chugger pump model has 1.5" tri-clamp inlet and outlet, allowing easy integration with your T.C. kettles or fermenter! We recommend setting these pumps up with a butterfly valve on the outflow side, this way you can throttle down the outgoing flow rate, allowing for more efficient sparges or cooling! The pump head can also be rotated 360° (in 90° intervals) allowing for even more customization! Features: Run Dry Carbon Bearing Stainless Steel Inline Pump Head Food Grade up to 250° F 1.5" tri-clamp inlet and outlet High Flow rate of 7 gpm Max Head 18.6 ft 115v 55" cord and plug attached 50/60 Hz, 1.4 amp 1/20 HP, 3500 RPM Note: When using silicone tubing, we recommend using a slighlty larger barb than the I.D. of the tubing. This is because silicone tubing tends to have greater pliability than most tubing. For example, when using 1/2" silicone tubing, we recommend our 5/8" barb (H620), to help ensure a better seal!    

Read more less

Introducing the X-Dry Series Chugger Pumps! These pumps offer the same great quality we've come to expect from Chugger, but now feature Run-Dry Protection. Although the Chugger still needs to be primed before each use, the X-Dry Series offers a new level of protection from damage due to cavitation. The Chugger lineup of pumps represents a great value for an even better price. These pumps are workhorses in the brewery. Featuring a robust flow rate of 7 gpm, and a magnetic drive designed to handle back-pressure, these pumps are a great addition to any brewing setup! The Stainless Steel Chugger showcases their molded Stainless Steel Pump Head. This stainless pump is a steal for the price, and we've been more than happy with the quality! Use this to ease transfers between kettles, cool wort via a counterflow chiller, or recirculate icewater for quicker chilling! The Chugger pump has 3/4" MPT inlet and 1/2" MPT outlet, allowing easy configuration for any application! We recommend setting these pumps up with a Ball valve on the outflow side, this way you can throttle down the outgoing flow rate, allowing for more efficient sparges or cooling! The pump head can also be rotated 360° (in 90° intervals) allowing for even more customization! Features: Run Dry Carbon Bearing Stainless Steel Center Inlet Pump Head Food Grade up to 250° F 3/4" MPT inlet and 1/2" MPT outlet High Flow rate of 7 gpm Max Head 18.6 ft 115v 55" cord and plug attached 50/60 Hz, 1.4 amp 1/20 HP, 3500 RPM No more issues with crossthreading plastic heads or snapping off fittings Note: When using silicone tubing, we recommend using a slighlty larger barb than the I.D. of the tubing. This is because silicone tubing tends to have greater pliability than most tubing. For example, when using 1/2" silicone tubing, we recommend our 5/8" barb (H620), to help ensure a better seal!  

Read more less

The History of MoreBeer! & March Many years ago MoreBeer! worked with March Pumps to release what is now the standard pump in the homebrewing community, their model 809 (our H315) with a polysulfone head and 6' cord with plug. Thousands and thousands of these pumps have been sold to homebrewers. The New Design Now, with a slight design modification, the new model nearly eliminates past cavitation issues (where the impeller spins in an air pocket and no liquid moves). We've been testing/using the pump with our BrewSculptures for several years now and are extremely happy with the results, so much so that we are completely replacing the H315 with the high flow model. Still Works the Same The new model comes with all the great features of the original - magnetic drive, handles flow restriction, okay for boiling temperatures, 6' cord with plug, food-grade materials in contact with the liquid, 1/2" ports, etc. - but now features a different slightly higher flow rate with less issues of cavitation. The magnetic drive in a March pump acts as a clutch allowing the user to put back pressure on the pump to slow down flow. Since it is magnetic drive, it is not self-priming, you must put the pump below the level of the liquid source. This pump cannot be run dry. Additional Notes To restrict flow place a ball valve on the out flow of this pump. This is the pump we install and use on all of our BrewSculpture brewing systems. We stock polysulfone replacement heads, H317, in case the threads are damaged. If you are looking for a pump for a larger home brewery or small nano brewery you can also look at our H325 Nano Brewery pump from March. Features List Included bracket for mounting 6' power cord with plug wired in for easy use 115V - 50/60Hz Maximum flow of just over 7 gpm (at zero head) Maximum head of 18 feet (at zero flow) 1/2" mpt fittings on both inlet and outlet. Materials in contact with solution: Polysulfone, 316 stainless steel, silicone rubber, Ryton and Teflon 1/25 hp, continuous-duty, thermal overload protected, single phase 1.4 Amp motor Motor is fan cooled Will handle internal pressures to 50 psi. Max temp rating: 250F Face unscrews and rotates at 90 degree intervals to adjust to your application. Note: When using silicone tubing, we recommending using a slighlty larger barb than the I.D. of the tubing. This is because silicone tubing tends to have greater pliability than most tubing. For example, when using 1/2" silicone tubing, we recommend our 5/8" barb (H620), to help ensure a better seal!

Read more less

A Stainless Steel pump housing is food-grade and nearly indestructable. Exact same internal pump as our H315 but with a stainless steel housing. Stainless steel is the material of choice for professional breweries because it is a durable, food-grade metal that can withstand caustic chemicals and can also be effectively sanitized. 3/4" mpt on center inlet. 1/2" mpt outlet. The magnetic drive acts as a clutch allowing the user to put back-pressure on the pump to slow down flow. With a ball valve on the outflow, you can slow flow all the way to nothing. Since it is a magnetic drive, it is not self priming, you must put the pump under the level of the liquid source. We wanted the pump to be brewer friendly so we had March install a bracket so that it can be mounted. We also had a 6' power cord with plug wired in for easy use. This is a tough little pump with a 1/25 hp, continuous-duty 1.4 Amp motor which can be run non-stop for extended periods. This pump has a maximum flow of 7.2 GPM with a maximum head of 12 feet. For an example of typical usage: with a head of 6' it will pump 3.25 GPM and with an 8' head it will pump 2.5 GPM. Motor requires 115v 50/60HZ power requirements.

Read more less

Specifically designed for the professional “Nano” brewery.   The reliable Nano Brewery Pump by March is designed for the small commercial brewery, where the H315 series is too small but you don't need an expensive, large-scale brewery pump. Featuring a robust flow rate of 17 GPM and a magnetic drive which allows you to throttle back flow without damaging the motor. The Nano Pump employs food-grade materials anywhere it comes in contact with your beer.   Please Note: This pump must be taken apart and cleaned after every use to prevent the impeller from seizing. To do so, take the bolts out of the pump head, remove the pump head from the pump, then take the impeller shaft and actual impeller apart. Clean well, and reassemble.   Materials in Contact with Beer Housing - Stainless Steel Impeller - Polysulfone O-Ring - Buna N Thrust Washers - Ceramic   Statistics Motor Output: 1/8HP/0.94KW Max Flow: 17 G.P.M at zero head Max Head: 27 ft. at 1 GPM Inlet: 1" FPT Outlet: 1/2" MPT Pressure: Max. internal pressure is 200 psi Temperature Range: 250F/121C Electrical Connection: 115V 50/60HZ. Please note that the pump comes with a three foot cord WITHOUT a plug attached.

Read more less

Designed for the small 'Nano' commercial brewery where the H315 series is too small but you don't yet need a full on expensive professional brewery pump. The March Nano Brewery Pump features a robust flow rate of 17 GPM with all the benefits brewers have come to expect from March magnetic drive pumps. Those features include the ability to throttle back flow and the use of food-grade materials where the beer is in contact with the pump. *Please Note* - This pump must be taken apart and cleaned after every use to prevent the impeller from seizing. To do so, take the bolts out of the pump head, remove the pump head from the pump, then take the impeller shaft and actual impeller apart. Clean well, and reassemble. Homebrewing Tips: 1. Great for Whirlpooling 20 gallons of wort or more. 2. Ideal for our Counterflow Chillers WC90. Please note that the pump comes with a three foot cord WITHOUT a plug attached. It has a 16 gauge 3 wire setup. Statistics Motor: 1/8HP 110v/60Hz Max Flow: 17 G.P.M at zero head Max Head: 27 ft. at 1 GPM Inlet: 1" FPT Outlet: 1/2" MPT Materials in Contact with Beer Polysulfone Stainless Steel Buna N Ceramic

Read more less

Imagine a brewing pump that eliminates cavitation, is easy to clean, has a built in valve, and is quiet. Introducing The RipTide pump from Blichmann, the first pump designed specifically for homebrewing. We love this brew pump. Like a brewer wired on coffee, let us rattle off some of our favorite features.  First, the pull style relief valve that allows air to exit the pump head so the impeller won't cavitate is a genius addition. Our next favorite feature is the bad-ass, built-in flow control valve so you don't have to add additional ball-valves. While we dont manually clean our pumps very often we like the idea that we can easily do that with the clover clamp style connection. That might be particularly important if you are transferring cool wort where extra sanitation might make a difference.  Equally cool is the noise, or lack thereof, when operating. It just wears on you to hear your pump grinding away all day. The RipTide pump isn't silent, but it is much quieter.  And to top it all off we like the mounting base and the extra long 3 m cord. 3 m gets the plug connection a few meters away from where we are brewing and less likely to be exposed to water - a simple upgrade that is really nice.  Oh, and we almost forgot the power switch which is always a nice feature on something electric!    All in all this is a no brainer upgrade for the difference in cost.     Features: Strong rare earth magnets and a curved blade impeller provide 22 L/M and up to 6.5M of pressure head! Tri-Clamp head disassembles easily for cleaning 1/2" NPT inlet and outlet Motor is enclosed in a splash proof and super quiet case Rotatable stainless steel head Integrated air release vent allows you to easily prime the pump everytime without those frustrating air bubbles and cavitation Linear flow valve provided for excellent flow control Power switch on base 3 m long power cord with 230V plug

Read more less

Upgrade your MKII Magnetic Drive Pump with a stainless steel pump head that quickly & easily installs via 3" tri-clamp T.C. connection allows the pump head to be oriented at any angle in a full 360-degrees Pull ring PRV at the pump outlet makes it easy to purge air and prime the pump before each use Inline flow path for smooth integration into your brewery while keeping your tubing lines tidy Stainless steel head with 1/2" threaded ports to attach your preferred fittings—tri-clamp, quick disconnect, camlock, and More! Upgrade your MKII Magnetic Drive Pump with a stainless steel inline pump head! The TC Breakdown Brewing Pump Head provides several advantages over the standard MKII pump head, first and foremost being it's made of stainless steel instead of plastic. This allows for much easier installment of fittings without the risk of breaking off the plastic inlet or outlet. It will also convert the pump head from "Center Inlet" to "Inline" flow path which can make it much easier to integrate into your brewery and keep your brewing hoses tidy. At the outlet of the pump, there is a very handy pull ring PRV that allows you to bleed liquor or wort from the pump head to release trapped air and prime the pump. But what some MKII users might find most exciting about this upgrade kit is that it converts the pump head connection to 3" tri-clamp! Not only do you have a full 360-degrees to orient the pump head any which way, cleaning the pump after use has never been easier—just pop off the tri-clamp, wash out the pump head, and clamp back on. This upgrade kit is only compatible with the 25-Watt MKII pump (PMP500). It will not fit the larger 65-Watt MKII or the Blichmann Engineering RipTide pump. If you don't already own the 25-Watt MKII, you can purchase it with the T.C. pump head already installed here. Tri-Clamp Pump Head The T.C. pump head can be removed quickly and easily using the 3" tri-clamp. This means no drivers or power drills are needed to back out the six Phillips head screws that mount the pump head on the standard version of the MKII. Whip the head off in a flash to clear out spent grain, hop material, or clear a blockage. Attaching the pump head with a tri-clamp also allows the head to be rotated at any angle in a full 360-degrees. This makes it easy to configure the plumbing to your unique brewery setup. Inline Design An "inline" pump head simply means the input and output are on a straight horizontal line with one another which can make it easier to integrate into your brewery setup. If you're using a 3-vessel horizontal system, the inline pump head will make it easier to keep your hoses neat and tidy compared to pumps heads with a center inlet. PRV Purge Valve The corny keg style PRV will make priming the pump a breeze. Simply let bleed the pump head to purge air out before turning the pump on and you'll avoid any cavitation issues. The PRV also acts as a safety so you do not over pressurize your pump head or brewery system. 304 Stainless Steel The entire pump head is made from 304 grade stainless steel so it's highly resistant to chemicals, heat, and physical abuse. The 1/2" BSP threaded ports can be used to attach barbs, quick disconnects, camlocks, tri-clamp adapters, or any other 1/2" fittings you prefer. KegLand Part Number: KL27267

Read more less

MB Variable Speed Pumps are an ideal tool in the brewhouse. These pumps feature a variable frequency drive that allows the pump to be supplied with 110V power. Using the built-in potentiometer speed control, run the pump at slow speeds for moving product with laminar flow or increase the speed to make the flow turbulent for efficient tube and pipe cleaning. This pump is designed to have very low shear loading to protect your product. Built on a robust stainless cart, with a stainless control panel, and a stainless motor guard. Moves quickly and easily around the brewhouse. The pump is also available by itself without the trolley cart and control panel (PMP650P). Features: 1.5" TC connections On/Off switch Emergency Shut Off Button Stainless Cart Stainless Motor Guard Stainless Control Panel GPM: 13.2 Max Head: 54' 1 HP Temperature Rating: 212°F Power: Input Power Required: 110-120V, 1ph, 60hz Amperage Draw: 8 amps Nema 5-15P plug  

Read more less

Upgrade your MKII Magnetic Drive Pump with a stainless steel pump head that quickly & easily installs via 3" tri-clamp T.C. connection allows the pump head to be oriented at any angle in a full 360-degrees Pull ring PRV at the pump outlet makes it easy to purge air and prime the pump before each use Inline flow path for smooth integration into your brewery while keeping your tubing lines tidy Stainless steel head with 1.5" T.C. ports to attach your preferred 1.5" tri-clamp fittings Upgrade your MKII Magnetic Drive Pump with a stainless steel inline pump head! The TC Breakdown Brewing Pump Head provides several advantages over the standard MKII pump head, first and foremost being it's made of stainless steel instead of plastic. This allows for much easier installment of fittings without the risk of breaking off the plastic inlet or outlet. It will also convert the pump head from "Center Inlet" to "Inline" flow path which can make it much easier to integrate into your brewery and keep your brewing hoses tidy. At the outlet of the pump, there is a very handy pull ring PRV that allows you to bleed liquor or wort from the pump head to release trapped air and prime the pump. But what some MKII users might find most exciting about this upgrade kit is that it converts the pump head connection to 3" tri-clamp! Not only do you have a full 360-degrees to orient the pump head any which way, cleaning the pump after use has never been easier—just pop off the tri-clamp, wash out the pump head, and clamp back on. This upgrade kit is only compatible with the 25-Watt MKII pump (PMP500). It will not fit the larger 65-Watt MKII or the Blichmann Engineering RipTide pump. If you don't already own the 25-Watt MKII, you can purchase it with the T.C. pump head already installed here. Tri-Clamp Pump Head The T.C. pump head can be removed quickly and easily using the 3" tri-clamp. This means no drivers or power drills are needed to back out the six Phillips head screws that mount the pump head on the standard version of the MKII. Whip the head off in a flash to clear out spent grain, hop material, or clear a blockage. Attaching the pump head with a tri-clamp also allows the head to be rotated at any angle in a full 360-degrees. This makes it easy to configure the plumbing to your unique brewery setup. Inline Design An "inline" pump head simply means the input and output are on a straight horizontal line with one another which can make it easier to integrate into your brewery setup. If you're using a 3-vessel horizontal system, the inline pump head will make it easier to keep your hoses neat and tidy compared to pumps heads with a center inlet. PRV Purge Valve The corny keg style PRV will make priming the pump a breeze. Simply let bleed the pump head to purge air out before turning the pump on and you'll avoid any cavitation issues. The PRV also acts as a safety so you do not over pressurize your pump head or brewery system. 304 Stainless Steel The entire pump head is made from 304 grade stainless steel so it's highly resistant to chemicals, heat, and physical abuse. The 1.5" tri-clamp ports can be used to attach barbs, quick disconnects, camlocks, or any 1.5" tri-clamp fittings you prefer. KegLand Part Number: KL36924

Read more less