Draft System Cleaning Equipment

This plastic ball lock cap features soda bottle threads, allowing you to convert a 1 or 2 liter soda bottle into a convenient travel growler. The ball lock is compatible with both gas and beverage disconnects, so you can charge the PET bottle before you leave the house and dispense on the go. Attach 3/16" or 1/4" ID tubing to the barb to serve as your dip tube and you're all set! These caps also work great for quickly and conveniently cleaning your draft lines. Mix up a small batch of line cleaning solution in a soda bottle, attach the ball lock cap, and then connect it to your beverage line. Place a bucket below your tap to catch the cleaning solution and open your faucet. Then simply turn the bottle upside down and squeeze it to push solution through your line and out the faucet. You can also choose to pressurize the bottle first, but squeezing the solution through is just as effective. Fermenting with the FermZilla? This is the same ball lock fitting included with the FermZilla Pressure Kit and it's also compatible with the FermZilla Collection Container. If you use the collection container to add dry hops, attach one of these caps and you'll be able purge the container of oxygen before opening the dump valve to introduce the hops. Attach some tubing and diffusion stone and you can oxygenate your wort through the collection container as well! When using two ball lock caps, we recommend pairing this red plastic cap with a yellow plastic cap so you can easily identify which caps are being used for liquid or gas. The barb is Duotight compatible. If you'd like to use the cap with 8 mm OD EVABarrier tubing, see DUO100. For a stainless steel option see KG500. Specs: Liquid and Gas Ball Lock Compatible Overall Length - 2.5" Barb Length - 7/8" Barb OD - 1/4" Barb ID - 3/16" 28mm PCO 1881 Threads Kegland Part number: KL10788

Read more less

BLC, also known as Beer Line Cleaner, is a preferred alkaline based draft line cleaner. Used to remove bacteria and loosen mineral deposits from beverage lines, faucets, etc.. Can be used with all type of cleaning systems and al types of draft set ups including long draw commercial systems, homebrew set ups, kegerators, draft box lines, etc.. Can be used with cold or warm water. No hazardous shipping.   Instructions for use: Add ½ oz BLC for each quart of water.  Drain out beer and run solution into line.  Circulate or let stand in lines for at least 15 minutes  Flush cleaning solution from line and rinse well with clean water. 

Read more less

This stainless steel ball lock cap features soda bottle threads, allowing you to convert a 1 or 2 liter soda bottle into a convenient travel growler. The ball lock is compatible with both gas and beverage disconnects, so you can charge the PET bottle before you leave the house and dispense on the go. Attach 3/16" or 1/4" ID tubing to the barb to serve as your dip tube and you're all set! These caps also work great for quickly and conveniently cleaning your draft lines. Mix up a small batch of line cleaning solution in a soda bottle, attach the ball lock cap, and then connect it to your beverage line. Place a bucket below your tap to catch the cleaning solution and open your faucet. Then simply turn the bottle upside down and squeeze it to push solution through your line and out the faucet. You can also choose to pressurize the bottle first, but squeezing the solution through is just as effective. Fermenting with the FermZilla? This is the same ball lock fitting included with the FermZilla Pressure Kit and it's also compatible with the FermZilla Collection Container. If you use the collection container to add dry hops, attach one of these caps and you'll be able purge the container of oxygen before opening the dump valve to introduce the hops. Attach some tubing and diffusion stone and you can oxygenate your wort through the collection container as well! Features: Liquid and Gas Ball Lock Compatible Disassembles for Easy Cleaning Made from Stainless Steel 28mm PCO 1881 Threads Please note: The threaded section of the bottleneck must be at least 1/2" long to form a seal. These caps are not compatible with the KegLand 500mL PET Bottles. Kegland Part Number: KL00826

Read more less

Keep the flies away and pesky microbes at bay with these beer faucet brush-style plugs. Made to sit flush when inserted into Intertap, NukaTap and Perlick brand faucets. Easily cleans your faucet spout and can be left in place when the tap is not in use. For the most sanitary seal possible, give the brush a good spray down with sanitizer before plugging the faucet. Comes in 2-pack.

Read more less

This plastic ball lock cap features soda bottle threads, allowing you to convert a 1 or 2 liter soda bottle into a convenient travel growler. The ball lock is compatible with both gas and beverage disconnects, so you can charge the PET bottle before you leave the house and dispense on the go. Attach 3/16" or 1/4" ID tubing to the barb to serve as your dip tube and you're all set! These caps also work great for quickly and conveniently cleaning your draft lines. Mix up a small batch of line cleaning solution in a soda bottle, attach the ball lock cap, and then connect it to your beverage line. Place a bucket below your tap to catch the cleaning solution and open your faucet. Then simply turn the bottle upside down and squeeze it to push solution through your line and out the faucet. You can also choose to pressurize the bottle first, but squeezing the solution through is just as effective. Fermenting with the FermZilla? This is the same ball lock fitting included with the FermZilla Pressure Kit and it's also compatible with the FermZilla Collection Container. If you use the collection container to add dry hops, attach one of these caps and you'll be able purge the container of oxygen before opening the dump valve to introduce the hops. Attach some tubing and diffusion stone and you can oxygenate your wort through the collection container as well! When using two ball lock caps, we recommend pairing this yellow plastic cap with a red plastic cap so you can easily identify which caps are being used for liquid or gas. The barb is Duotight compatible. If you'd like to use the cap with 8 mm OD EVABarrier tubing, see DUO100. For a stainless steel option see KG500. Specs: Liquid and Gas Ball Lock Compatible Overall Length - 2.5" Barb Length - 7/8" Barb OD - 1/4" Barb ID - 3/16" 28mm PCO 1881 Threads Kegland Part number: KL10788  

Read more less

Life is too short to drink bad beer! Beer flavor gets funky when your tap, line and faucet are filled with beer stone--a left over gift from pints long  since poured. You do NOT want to share that with your friends!   Ideally you want to clean your lines after every keg, but at the very least cleaning them a few times a year (we like quarterly) will keep your brew pouring fresh and your friends asking for more! Our Draft Cleaning Kit comes with a 1 qt hand pump that pushes Beer Line Cleaner (4 oz size included) through your whole draft system. The faucet gets removed and cleaned with the included faucet wrench and brush. Perfect for cleaning home kegerators as well. 

Read more less

Keep fruit flies and spiders out of your draft beer faucet with this handy plug brush. Plugs your faucet when you are not using it. Attached brush cleans faucet on the way in and out. We like to spray the brush moist with Alpet Spray Sanitizer for the most sanitary seal possible. Note: Does not sit flush on Intertap, NukaTap or Perlick faucets

Read more less

Mark’s Mark II Keg Washer™ is designed to clean and sanitize large vessels like cornelius kegs and carboys. This keg cleaner is also intended to provide a sanitation container for miscellaneous items such as airlocks, thermometers, tubing, keg fittings, and more. Quiet, Fun, & Easy to Use Very quiet when in use and most importantly speeds up the process of cleaning and sanitizing.    Light in weight.  Easy to store.  Cleans Kegs This keg washer cleans and sanitizes a cornelius keg without having to take apart the ball lock fittings, poppets, and dip tubes. You can clean the keg and the dip tube simultaneously using the T adapter. Cleans Tubing Too Cleans tube separately utilizing the pump with the additional barb fittings included.  Cleans Parts Reservoir holds 1.25 gallons of water making it easy to fill and empty with sanitizer.     Saves water and sanitizer.  The keg washer does not have an on/off switch, you can plug it directly into a wall outlet to operate the pump or plug it into an outlet that is controlled by a switch. Never leave the keg washer unattended when in use. When in use, fill the keg washer up to about 1 inch under the brim. The pump is not self priming, so always make sure the basin is full of water before plugging in the pump. Owner's Manual is included. Please read thoroughly before using. Dimensions of the inside of the washer's reservoir are: 6"L x 12"W x 4"D. Please Note: Product does not include the bucket, carboy, or keg pictured above for display purposes. The pump specs are: 520 GPH 120 Volts AC 40 watts Ceramic shaft, impeller  

Read more less

A must-have tool for any DIY draft-cleaning system, the Faucet Cleaning Adapter makes it a cinch to back-flush your draft lines for cleaning. Simply remove your draft faucet and mount the adapter in its place, leaving you with a 3/8” barb to connect tubing.   Made from brass.

Read more less

Another great invention coming out of Ss Brewtech, the Keg WaSsher! This is a hands free, clean in place keg washer that will make cleaning kegs one of the easiest steps of the brewing process. Gone are the days of disassembling your keg to clean it. The cleaning process is pretty simple. Just take the keg lid off, attach the keg washer, attach both ball lock QDs, stick the whole thing upside down in a bucket full of sanitizer, turn on the pump and your keg is clean. The Keg WaSsher is designed to fit in a standard 5 gallon bucket. It also only uses 2 gallons of cleaning solution resulting in less chemical waste and evironmental impact. If you want to get fancy, you can set up a wash station with 3 buckets to perform an initial cleaning, fresh water rinse, and sanitizer. All you have to do is lift the whole apparatus from one bucket to the next! Features: Hands free operation Chemical resistant submersible pump Attaches to common ball-lock Cornelius-style kegs w/ removable lids Powerful CIP spray ball Entire assembly fits in 5-gallon bucket Cleans inside of keg and ports simultaneously Easily attaches/detaches from kegs Perform clean, rinse, and sanitize steps all with the same unit

Read more less

This stainless steel ball lock cap features soda bottle threads, allowing you to convert a 1 or 2 liter soda bottle into a convenient travel growler. The ball lock is compatible with both gas and beverage disconnects, so you can charge the PET bottle before you leave the house and dispense on the go. Use the Duotight compatible stem to connect a 8mm or 9.5mm reducer, then attach EVABarrier draft line to serve as your dip tube and you're all set! These caps also work great for quickly and conveniently cleaning your draft lines. Mix up a small batch of line cleaning solution in a soda bottle, attach the ball lock cap, and then connect it to your beverage line. Place a bucket below your tap to catch the cleaning solution and open your faucet. Then simply turn the bottle upside down and squeeze it to push solution through your line and out the faucet. You can also choose to pressurize the bottle first, but squeezing the solution through is just as effective. Fermenting with the FermZilla? This is ball lock fitting is also compatible with the FermZilla Collection Container. If you use the collection container to add dry hops, attach one of these caps and you'll be able purge the container of oxygen before opening the dump valve to introduce the hops. Attach some tubing and diffusion stone and you can oxygenate your wort through the collection container as well! Features: 6.5mm Duotight Compatible Liquid and Gas Ball Lock Compatible Disassembles for Easy Cleaning Made from Stainless Steel 28mm PCO 1881 Threads Please note: The threaded section of the bottleneck must be at least 1/2" long to form a seal. These caps are not compatible with the KegLand 500mL PET Bottles. Kegland Part Number: KL20435

Read more less

Made with a fully stainless steel sanke coupler with ball valves at both ends. The check valves have been removed so solution can be back flushed through the system. Perfect for washing or filling Sanke D kegs. This is the same coupler featured on the MoreBeer! Pro Manual Keg Filler. 1/2" tailpieces at inlet and outlet.  

Read more less

This non-caustic cleaning powder will make quick work of any stubborn soil build-up on your brewing equipment. TLC will help you brew your best beer possible by keeping your home brewery in tip-top condition. TLC is an efficacy proven alternative to caustic cleaners. Why You'll Love TLC: Versatile – TLC is a versatile cleaner and allows for both soak and low foam circulation cleaning. This product works at all temperatures. Effective – TLC is effective at removing the toughest caked on debris without scrubbing. It is non-corrosive and safe to use on soft metals. Safe – This product is safe on skin, and has no noxious fumes, while maintaining the effectiveness of heavy-duty caustic cleaners. Economical – TLC is an easy to use and economical choice for tank and line cleaning. Product Highlights: Non-caustic formula Great for circulation cleaning or parts soaking Effective at removing organic soils such as fats, greases, proteins, and yeast Effective at a wide temperature range Safe on soft metals Economical dilution Non-corrosive with the performance of a caustic cleaner Convenient pack sizes Oxygen booster for alkaline cleaning solutions Skin contact safe Gentle on rubber seals and gaskets  

Read more less

Perfect for spraying down brewing equipment with dissolved cleaners or sanitizers Attach the optional Ball Lock Keg Post Adapter to convert the sprayer into a line cleaning device Empty the large 33.8 oz tank up to 30 times on a single charge The Power Sprayer is a fantastic multi-purpose device that can be used for spraying down your brewing equipment with cleaners and sanitizers or converted into a pressurized line cleaning system. The tank features graduated volume markers and can be emptied up to 30 times on a single charge. The nozzle knob can be adjusted to turn the stream into a fine mist or a powerful jet. This product is made from food grade Santoprene, PP, PE, Silicone and stainless components. Battery Life The pump has large 18650 li-ion rechargeable battery. On a full charge the battery will empty the tank 18-30 times so it lasts for ages. If you use fine mist it will be closer to 18 times but if you use a jet/stream the battery will last closer to 30 times. Includes: 33.8 oz Reservoir Tank Power Sprayer Nozzle and Dip Tube White Plastic Adjustment Head Sprayer 6" USB-C to Standard USB Cable *Does not include USB wall charger KegLand Part Number: KL40860

Read more less

PetroGel is used as a food grade lubricant in kegging systems, and other beer and wine applications. It can be used to lubricate o-rings, and can "rejuvenate" worn o-rings on keg lids and other areas. The petroleum lubricant can get sticky and hold on to soils. For a non-sticky alternative, some people prefer the silicone spray lubricant (CH238).

Read more less

The WilliamsWarn Keg Washer is a convenient option for cleaning and rinsing D-Style commercial Sanke kegs. No need to remove the spear from the keg—simply lock the keg washing into the keg as you would a tap coupler, then hook up water or cleaning solution to the 3/4" GHT inlet. Simple and effective.  

Read more less

Clean multiple beverage draft lines in a single loop using this Ball Lock Keg Jumper Post. Makes cleaning your kegerator or keezer a breeze without the need to remove your quick disconnects. This double ended keg post does not have a spring & poppet. It just has a piece of bar that activates the ball lock disconnect wide open. Please note it is a single piece that cannot be undone from the middle. KegLand Part Number: KL20152

Read more less

Converts the KegLand Power Sprayer into a compact, convenient line cleaning device Ball Lock multi-post is compatible with both Gas & Liquid QDs Attach the Ball lock Keg Post Adapter to the KegLand Power Sprayer to turn the unit into a convenient line cleaning device. The multi-post is compatible with both Gas & Liquid ball lock quick disconnects. This part is only suitable for the Power Sprayer. It is not a standard thread size. It has been custom made for this product and this product only.   Please Note: The keg post adapter does not include a spring & poppet. This is intentional in order to prevent the flow path from being blocked if the sprayer was unintentionally powered on without a ball lock disconnect connected to the post. Powering the sprayer with the flow path blocked could damage the pump. KegLand Part Number: KL42871

Read more less

Use this adapter to connect your beer line cleaning pump directly to a sanke keg coupler. This allows you to back flush cleaning solution through your lines without having to remove the faucet. Simply attach your D-style coupler, open your facuet, and pump solution through. Adapter only. Does not include beer line cleaning pump or coupler.

Read more less

You love your Carboy Cleaner so much that you’ve worn out the cleaning pads!   A set of replacement pads and washers for The Carboy Cleaner™. The ease and convenience of the Carboy Cleaner can’t be overstated. After you’ve used it to clean enough carboys and kegs, you will need to replace the cleaning pads.   Set of 2 replacement pads and 4 washers for The Carboy Cleaner™.

Read more less

The ideal vessel for serving pre-mixed cocktails and other concoctions on draft Easily pour in your beverage of choice through the wide corny-style lid opening without needing to remove the spear Doubles as a line cleaning keg Rolled handles for a comfortable grip Low2 lid O-ring reduces oxygen ingress by 96% compared to silicone O-rings when measured in a keg! Made by an ISO certified commercial keg manufacturer with high-quality laser welded seams The Torpedo Cocktail Keg is the ideal vessel for serving pre-mixed cocktails and other concoctions on draft. The corny keg style lid makes it easy to pour in your beverage of choice without having to fuss with removing the spear like with standard commercial sanke kegs. Hook up a D-Style keg coupler to begin carbonating the beverage from the bottom up. These kegs provide the added advantage of fully carbonating the entire cocktail. When making drinks on the fly, carbonation is lost quickly since you're mixing carbonated and still ingredients together. But when served from a fully carbonated keg, you can enjoy the bubbles in your glass for longer! Draft lines needing some love? The Torpedo Cocktail keg easily doubles as a line cleaning keg. Simply fill with a batch of LLC or BLC to give your bev lines a little TLC. Low2 Keg Lid O-ring Give your beverage the absolute best protection from oxygen staling with the Low2 keg lid O-ring. Even the most perfectly sealed keg is susceptible to oxygen ingress through the hatch O-ring—yes, even if the keg is under constant pressure with CO2! Even a leak-free, pressurized keg will release CO2 molecules as they pass through the lid O-ring itself, and conversely, Oxygen molecules will permeate through the O-ring and diffuse into the keg when they reach the surface area on the other side. The level of permeability is wide ranging and highly dependent on what material the O-ring is made from. Rather than the usual EPDM or Silicone, Low2 gaskets are made from a unique composition of Synthetic M-Class and Cross-Link Elastomers. This special blend has superior oxygen barrier properties that results in your beverage staying fresher for longer. Specifications: Max Pressure: 130 psi PRV Rating: 85 psi High Quality Laser Welded Seams ISO9001 Quality Assurance Made from 304 Stainless Steel Dimensions:   Height (in.) Diameter (in.) 1.5 Gal 10 9 3/8 2.5 Gal 13 1/4 9 3/8  

Read more less

Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this item to you when we receive more in late March. Designed specifically for cleaning draft lines, this hand pump pressurized keg is easy to use and doesn't need CO2 like many other line cleaning kegs. After filling the keg with cleaning solution, unscrew the beer line from your sanke coupler and attach it to the included beer thread coupler to hook it up directly to the cleaning keg. Pumps from the bottom to the top, allowing you to leave the cleaning solution in the line for 15 minutes. We recommend cleaning your lines every time you switch out a keg or every 6 weeks, whichever comes first. 1 gallon capacity Comes with a 3/16” x 5/16” hose Included Female Beer Thread (5/8" BSP) Coupler Also Included: Beer Line Cleaning Brush ​With 8" length and 5/8" diameter, this brush is ideal for cleaning keg couplers, draft faucets, 3-Piece airlocks, 1/2" bottle fillers, and 3/8" or 1/2" spigots. Features a coated tip to prevent scratching or damaging surfaces. Draft Beer Faucet Brush and Plug ​Keep fruit flies and other bugs out of your draft beer faucets when not in use. This plug style brush will clean the faucet nozzle on the way in and when pulled out. It works with standard beer faucets and Intertap, NukaTap, and Perlick brand faucets. Double Shank and Faucet Wrench Draft wrench designed to tighten the hex nut on the back of a faucet shank. Well suited for keezers or even draft towers. Features a pin wrench for tightening the faucet coupling ring where your faucet attaches to the draft shank.

Read more less

Just the pump for the cleaning kit, no cleaner, wrench, or brush.

Read more less

This male to male coupler is commonly used in draft line cleaning. It allows the connection of draft lines for cleaning loops. Male beer thread to male beer thread (5/8" BSP).

Read more less

This handy tool is inserted into the bottom of your keg coupler to lift the ball check valve, allowing you to flush cleaning solution through from the tap without needing to disassemble the keg coupler. A simple solution to save you time while cleaning draft lines. Comes in a convenient zip lock bag.

Read more less

Removes beer and beverage soils and other off-flavor producers from beer lines Heavy-duty, liquid, caustic Low-foaming Can be used in both hot and cold applications Will withstand storage temperatures as low as 32°F Formerly sold by Five Star as LLC or Liquid Line Cleaner Recommended for hot and cold process CIP cleaning circuits Mix solutions according to equipment and application CIP: 2-9 quarts of LCC per 50gal. of water. Brew Kettles: 2oz. of LCC per gallon of water. Heat Exchangers: 3-4 oz of LCC per gallon of water Circulate for 30 minutes at temperatures between 160°-180° (must be 180° if for heat exchanger) Rinse with water   Please note: Intended for commercial use. Due to DOT HAZMAT shipping restrictions, orders 55-gallon, or multiple 1-gallon units will require freight shipping. HAZMAT items are not able to be returned.

Read more less

Accelerator super charges the Vantage Synergy Power User Formula to provide superior results with unmatched safety. This enzyme-based cleaner will reduce biofilms and odors throughout your beverage system. Enzyme-based cleaners for beverage systems are a safe and modern alternative to traditional hazardous chemicals. Vantage Synergy Accelerator is not a standalone cleaning option but is designed for the three-part Power User Formula. Industry standard beverage system cleaning best practices can be time-consuming and often dangerous. Using enzyme-based cleaners are a new and safe alternative to hazardous caustic chemicals and are effective for removing biofilms and odors from beverage systems. Triple zero rated for health and safety. No DOT hazardous shipping warnings. Features industry standard tracer dye. When used with Vantage Synergy Biomass Remover and Vantage Synergy Demineralizer, the Vantage Synergy Accelerator boosts the Power User Formula to provide outstanding results without the safety concerns of other hazardous cleaning chemicals. For use only in Power User Blend with Vantage Synergy Biomass Remover and Vantage Synergy Demineralizer. Vantage Synergy is an industry-leading non-caustic, non-toxic beverage system cleaning solution that reduces cleaning time by up to 50%. This non-hazardous lineup of cleaning chemicals reduces the risk of injury compared to other caustic solutions, and is much more environmentally friendly thanks to its biodegradable chemistry. For use with CO2 pots and recirculating pumps: Add 2 oz Biomass Remover, 2 oz Demineralizer, 2 oz Accelerator per gallon of water for the complete Power User Formula. ONLY mix Vantage Synergy products with each other. NEVER mix any other chemical products with Vantage Synergy products. Highlights: Use the three-part Synergy package and reduce cleaning time by up to 50% Non-caustic, non-corrosive and non-hazardous Triple zero health and safety rating No DOT hazardous shipping charges for freight or parcel delivery Improve personal and consumer safety, reduce property damage and injury liability claims Built-in industry standard tracer dye Biodegradable chemistry limits wastewater effluent concerns   Challenge: Not having enough time to perform industry standard cleaning cycles and visit enough accounts per day. Solution: Use the three-part Synergy package and reduce cleaning time by up to 50%. Challenge: Existing cleaning products are hazardous, dangerous, and corrosive. Solution: Vantage Synergy chemicals are non-caustic, non-corrosive and non-hazardous. Switching to Synergy will improve personal and consumer safety, reduce property damage costs and mitigate injury liability claims. Challenge: Built-in tracer dye as an industry standard safety feature. Solution: Our “old” caustic and acid brands did not feature a tracer dye, Vantage Synergy does. Tracer dye indicates when cleaning solution is loaded into a system. Challenge: Dangerous caustic and acid chemicals are not “green” products. Solution: Vantage Synergy products are biodegradable and limit wastewater effluent contamination concerns. Challenge: Hazardous shipping fees are expensive for freight and parcel delivery. Solution: Vantage Synergy products are “triple zero” non-D.O.T. regulated for shipping.      

Read more less