Flare keg fittings can be convenient when kegging as they are a universal thread, making it possible to interchange tubing sets or keg connections. Just make sure to use the flare washer when necessary and have them properly tightened to prevent leaks!
Flared Keg Fittings
-
Flare Fitting Set - 1/4 in. Nut & 5/16 in. Barb
This is a special 1/4" nut and 5/16" barb that will attach to threaded quick disconnects or other 1/4" male flare fittings and allow 5/16" gas tubing to be attached. Stainless Steel barb with a chrome plated Brass nut.
$4.99
-
Flare Fitting - Washer
Nylon washer used with 1/4 inch flare fittings. Use the washer anywhere you have metal to metal contact on flare fittings to prevent leaks. This can be on certain types of regulator connections and with stainless steel quick disconnects (like the Torpedo Quick Disconnects) This gasket is not necessary when connecting female flare fittings to the plastic MFL quick disconnects because they have a plastic washer built in.
$0.49
-
KOMOS® | Stainless Flare Fitting Set | 1/4 in. Swivel Nut & Barb
1/4 in. barb and 1/4 in. swivel nut for flare fitting connections. If you're connecting to stainless steel or brass, you will also need a nylon flare washer to form a seal. Plastic quick disconnects (QDs) on the other hand, have a built-in washer so the additional nylon flare washer is not needed. The barb and nut are both made from stainless steel. We recommend using 3/16" ID tubing for a tight fit.
$4.39
-
Flare Fitting - 1/4 in. MFL x 1/4 in. Barb
Stainless steel flare fitting used in draft beer systems for various configurations.
$3.49
-
KOMOS® | Nylon Flare Washers | 10-Pack
Nylon washers are used to create a seal between metal-to-metal 1/4" flare fitting connections. Most often used with stainless steel ball lock quick disconnects to prevent leaks. These washers are not necessary when connecting female flare fittings to plastic male flare QDs that have a plastic washer built-in. Flare washers are easy to misplace so we always recommend keeping spares on hand. Comes in a convenient zip lock bag.
$5.49
-
$3.99
-
KOMOS® | Flare Fitting Set | 1/4" Swivel Nut & 5/16" Barb | 4-Pack
5/16 in. barb and 1/4 in. swivel nut for flare fitting connections. If you're connecting to stainless steel or brass, you will also need a nylon flare washer to form a seal. The barb is made from stainless steel. The nut is made from nickel plated brass. Comes in a convenient zip lock bag.
$16.49
-
Ball Lock Quick Disconnect (QD) | Beverage Out | Flare | KOMOS®
Bev Out ball lock quick disconnect with 1/4 in. flare connection. Flare fitting barbs come in multiple sizes so you can choose the draft tubing size that best suits your needs. Features a built-in washer so you will not need a separate nylon washer. Manufactured in Germany by CM Becker. Packaged in the U.S. and distributed by KOMOS.
$8.09
-
Ball Lock Quick Disconnect (QD) | Gas In | Flare | KOMOS®
Gas In ball lock quick disconnect with 1/4 in. flare connection. Flare fitting barbs come in multiple sizes so you can choose the draft tubing size that best suits your needs. Features a built-in washer so you will not need a separate nylon washer. Manufactured in Germany by CM Becker. Packaged in the U.S. and distributed by KOMOS.
$8.09
-
KOMOS® | 1/4 in. MPT x 1/4 in. Flare Adapter | 2-Pack
Adapt 1/4" male pipe thread to 1/4" male flare thread, making any 1/4" FPT fitting compatible with flare fittings or flare threaded Duotight fittings. Made from chrome plated brass.
$7.69
-
KOMOS® | Flare Fitting | Stainless 1/4" Barb | 4-Pack
Stainless steel 1/4 in. barb for flare fitting connections. For use with 1/4 in. swivel nut (KEG1106 or KEG1107). If you're connecting to stainless steel or brass, you will also need a nylon flare washer to form a seal. Comes in a convenient zip lock bag.
$6.59
-
Flare Fitting - 1/4 in. Tee
Stainless Steel Tee with threaded outputs on all three sides. 1/4" Flare thread for use in gas line connections in a draft beer set up.
$14.99
-
KOMOS® | Flare Fitting | Stainless 5/16" Barb | 4-Pack
Stainless steel 5/16 in. barb for flare fitting connections. For use with 1/4 in. swivel nut (KEG1110). If you're connecting to stainless steel or brass, you will also need a nylon flare washer to form a seal. Comes in a convenient zip lock bag.
$8.79
-
KOMOS® | Flare Fitting | 1/4 in. Swivel Nut for 1/4 in. Barb | 4-Pack
Swivel nut for 1/4 in. flare fitting connections. For use with 1/4 in. barbs (KEG1108). If you're connecting to stainless steel or brass, you will also need a nylon flare washer to form a seal. Made from nickel plated brass. Comes in a convenient zip lock bag.
$6.59
-
KOMOS® | Flare Fitting | Stainless 1/4" Swivel Nut for 1/4" Barb | 4-Pack
Stainless steel swivel nut for 1/4 in. flare fitting connections. For use with 1/4 in. barbs (KEG1108). If you're connecting to stainless steel or brass, you will also need a nylon flare washer to form a seal. Comes in a convenient zip lock bag.
$13.99
-
KOMOS® | Flare Fitting | 1/4" Swivel Nut for 5/16" Barb | 4-Pack
Swivel nut for 1/4 in. flare fitting connections. For use with 5/16 in. barbs (KEG1109). If you're connecting to stainless steel or brass, you will also need a nylon flare washer to form a seal. Made from nickel plated brass. Comes in a convenient zip lock bag.
$8.79
