I highly recommend the EVA Barrier Double Wall draft tubing. It has eliminated the phenolic/plastic taste from the first 3 oz. of beer drawn from my keg. I lived with that for a dozen years or more. Well worth it!

Works great for dispensing, fermenting, and transfers. Great product.

Was a bit skeptical about the duotight stuff, but it truly is "plug and play" so easy to use. Working,Ike a charm so far ??

What can I say about this tubing that hasn't been said? It's awesome and so are the duotight fittings!

So far the EVABarrier tubing has been very nice to work with. It can be softened up in boiling water to either give it a set or to remove any coil set that is undesirable.

Awesome, especially with Duotighy

I like to keep spare hose on hand. This hose is easy to use with my beer distribution

I replaced all of the beer and gas lines in my four tap keezer, Incredibly easy to work with and zero leaks.

Quality, exactly what I expected.

I like this stuff a lot! Easy to deal with. Wish I would have found it sooner. Easy to make jumpers and easy to disassemble and clean if necessary.

Doutight is a great system. I use an upright refrigerator with 4 kegs and a pressurized air line sat against the light bulb for maybe 10-20 seconds while moving kegs around. The sound of air got my attention! I will buy an LED light to replace it (uses 5w, not 40, so it must be cooler). Hopefully all will be well after that. Cheers!

Using this tubing with Duotight fittings and Pluto Beer Guns for my liquid lines. So much easier to handle and swap around. No discoloring of tubing, as of yet. Been using for about a week. No leaks. Would def recommend!

I swapped out the 3/16" beer lines in my kegerator with this and noticed a big difference in pours. Considerably less foam on first pour and pairing it with duo-tight fittings, it's so versatile in ability. I'll also be swapping out my gas lines with it soon.

Where has this product been all of my brewing life?!? Believe the hype. Smaller ID tubing that helps reduce foaming, "quick disconnect" any line from either end, protects against CO2 egress and O2 ingress, easy upgrade to a beer gun for dispense vs."picnic taps", no more worm clamps or compression clamps!I switched over my liquid side last weekend and zero leaks. After looking at how cheap the duotight gas regulators are it's inevitable that I switch the gas side over next and finally implement individual pressure for my kegs.

This is a quality product at a great price. Prior PVC beer line left a "plastic" taste in my beer. I switched to silicon, but the lines were prone to bursting under pressure often leaked at the connections due to being so soft and fragile.. This product solves both problems. there is no plastic taste in the beer and they are very durable. They are stiff, so hot water is needed to slide the line over the connector.

This is easy to use and very fast in setting up the CO2 line in your Kegerator!

Great tubing and duotight system

Great product. Switched all my beverage lines to this.

Used with the duotight fittings. Couldn’t have been any easier to finish off the new keezer.

Works great!! I used it to extend the blow off side of the blowtie sounding gauge

The EVA tubing is very easy to work with and provides an oxygen barrier. That is a perfect combination for a keg setup.

Easy to use makes for a neat job made for head free beer serving Write your review here. It must be at least 20 characters long. Consider whether you would recommend this product and what you like or dislike about it.

Much much better than my old tubing. I replaced very stiff tubing that also had to be twice as long.

No noticeable off flavors and works perfectly with duotight fightings no leaks.

We use it in a Piaggio Ape based mobile bar, where lines are often installed and removed same day to support an event. This tubing, is giving us a great smooth pour and it s breeze to work with.

Exactly as ordered and shipped promptly! Very pleased!

For years I've been using a 6 ft line so my beers were 3/4 foam and 1/4 beer. This solved that issue. Pours are more like 3/4 beer and 1/4 foam now with the 5 ft EVA lines. The only thing is that I had to change out my faucets from Perlicks to Intertap (Perlicks will not work with this setup), so it went from $20+ to > $100 to have everything working.

Easy to work with. Good quality.

The entire Duotight system including the tubing is just easy and gets the job done.

Perfect diameter for no foam pours

This came with my new kegerator and it seems to pour much better than my old tubing.

As others have stated, this beer line does not impart plasticy flavor like the common PVC beer lines. Even relatively high-quality line I've used before, I'd have to flush the volume of the tubing before taking any to drink, or all I would taste is plastic. I think some people are more sensitive to that flavor than others - my partner doesn't notice it as badly. I guess I'm just unlucky (lucky?).With these lines, I get none of that taste - they are also cheaper! And, if you do want to flush the tubing volume anyway just to be safe or whatever, these 4mm lines pour well at 5-6', vs 8-10' for a 3/16 line, and so the volume that you'd have to "dump" is significantly less than contained in the 3/16 line. I've swapped now to also using the duotight fittings and will not be going back. Very pleased.