Not to knock the hot stuff, but nothing is quite as enjoyable as a tall glass of cold brew coffee. Cold extract coffee tends to offer a more rich, smooth coffee flavor, and since it's steeped at a much lower temperature, you don't extract as much of the oils and acids from the beans as when you hot steep. You may be surprised to learn that making cold brew coffee at home is an incredibly simple process that only requires a few pieces of equipment. The ratio we've found that works best is 4 oz of course coffee grounds to 6 cups of water, and this ratio can easily be extrapolated to brew whatever batch size you desire. Simply combine the grounds and water in your vessel of choice, place it on the countertop or in the fridge and let steep for 12-16 hours, strain out the grounds into a secondary vessel using a mesh bag or sieve, and you're done! Don't be fooled by Big Cafe, it doesn't take a barista wiz to enjoy cold brew whenever you please!
Add hops or other boil additions while retaining most of the vegetal matter
Leads to clearer beer and less transfer issues due to clogging
Made from food-grade nylon that can be washed and sanitized between uses
Drawstring keeps the bag closed and can be tied off to your kettle handle
Holds approximately 2 oz of pellet hops after they swell up
Reusable small Nylon Mesh Bags are an indispensable part of any brew day.
These food-grade nylon bags are available in a range of sizes and with either a fine or a medium mesh weave, which make them both more versatile and a better value than disposable cloth muslin bags. These bags are used for a wide range of different applications during brewing and fermentation.
Nylong bags are often times used to add pellet hops to the boil or as a dry hop in the fermenter. Retains the vast majority of the hop material, making for clearer beer and easier transfers. Can also be used to add smaller amounts of other adjuncts to the boil or fermenter, such as orange peel, oak, spices, etc. This small 6 x 8 inch nylon mesh bag will hold up to 2 oz of pellet hops after they swell up. Features a handy drawstring to keep the bag closed and tie it off to your kettle handle, spoon or mash paddle.
Bag size is 6 in. x 8 in, with hole size in mesh of approximatley 0.4-0.8 mm is size.
You love making beer. You give careful attention to each step in the brewing process. That’s why having a simple yet elegant way to complete one of those steps is indispensable. This fine mesh bag makes adding hops to your brew, and then removing them again, a breeze! The ultra-fine mesh fabric keeps most of the hop material from entering your fermenter. Great for additions of pellet hops during the boil! It also works well for dry hopping in the keg, with pellet or whole hops.
Note: Dry hopping with pellets in a keg using this bag will throw a little matter into your beer, but it settles out pretty quickly and we have had good luck with this procedure.
Perfect size for 1-4 ounces of pellets or 1-2 ounces of whole hops.
Can also hold specialty grains
Reusable
Easy to clean
Great price
Bag size is 9 in. x 12 in, with hole size in mesh of approximatley 0.4-0.8 mm is size.
A great bag for brew in a bag recipes or just steeping grains. Made from nylon this bag comes with a drawstring and measures 18 in x 20 in, with hole size in mesh of approximatley 0.4-0.8 mm is size.
Wide mouth jar for small batch fermentations or storing pickled food items
Large 3.9" diameter opening
100-2055 Lug Finish neck with metal lid included
128 oz (1 Gal) capacity
Widemouth glass jars are great for fermenting small batches of fruit wines, beer, vinegars, lacto fermented foods, and more. The 100 mm (3.9") wide opening is large enough to add product, and to reach your hand in for cleaning.
100 mm lug finish metal lids included (FE309A).
These jars have a lug finish.
All the crucial features of a top-shelf brew kettle at an incredible price!
These kettles are the perfect choice for new brewers leaving the kitchen stove and stepping up to the full boil brewing method
Made from stainless steel throughout which is easy-to-clean and offers a lifetime of reliable use
Two welded 1/2" ports for common threaded brewing accessories—ball valve and barb fitting are included for the bottom port
Internal volume markers make it easy to measure pre boil volume and post boil volume
Silicone grips made for comfortable, slip-free handling
If you’re searching for a fully featured brew kettle but don't want to break the bank, the Brewmaster 8.5 Gallon Stainless Brew Kettle will certainly do the trick. Made of 100 percent stainless steel and available for a truly amazing price, this reliable brew kettle is perfect for first-time brewers and experienced home brewers alike. Two ½-inch couplers are welded to the side of the kettle, and the bottom coupler can even be threaded on the inside of the kettle to use with a diverter or a kettle tube screen. These kettles are upgraded with Silicone Grip Handles and Stamped volume markers on the inside, making brew day that much easier.
Add an AG405 (domed false bottom) to this stainless brew kettle and you can even use it as a mash tun. Includes a ball valve and a threaded adpator to 3/8" barb for easily attaching transfer tubing. Also included is a thread 1/2" plug for the thermometer port. Thermometer is not included and can be added at any time.
Features:
8.5 Gallon Stainless Steel Brewmaster Brewing Kettle
Two Welded 1/2" Full Couplers allow for internal and external attachments
Stainless 1/2" Full Port Ball Valve & nipple included for bottom Coupler
Stainless 1/2" Plug included for top coupler
Stamped Volume Markers
Silicone Handle Grips
Internal Threading allows for conversion to Mash Tun or addition of whole hop filters
Internal Dimensions: 13.75" Tall x 13.75" Ø
1 mm thick walls
Made from 201 Stainless Steel
Approximate Internal Dimensions 13.75" tall 13.75" wide.
This item does not work with induction burners
A ball valve, nipple, and plug are included for the welded couplers. A thermometer, false bottom, or kettle screen can be added separately
Simply unscrew the normal spout on a NukaTap or Intertap faucet and screw this stout spout in its place to pour your nitro brews. This spout has a creamer/aerator disc inside that strips out the nitrogen gas for a creamier beer. Matches perfectly with the NukaTap Stealth Bomber faucet! For additional disc options, check out the 7-Disc Creamer/Aerator Kit.
Stainless steel construction with matte black finish.
Kegland Part number: KL21135
This stainless steel strainer is 10.25" in diameter, and features a double mesh basket with a wooden handle. Great for straining hops, wort, and adjuncts during the brewing process.
Wide mouth jar for small batch fermentations or storing pickled food items
Large 3.9" diameter opening
100-2055 Lug Finish neck (lid not included)
128 oz (1 Gal) capacity
Widemouth glass jars are great for fermenting small batches of fruit wines, beer, vinegars, lacto fermented foods, and more. The 100 mm (3.9") wide opening is large enough to add product, and to reach your hand in for cleaning.
Lids are not included, see our 100 mm lug finish metal lids: FE309A. 1 gallon widemouth jars are sold individually, and come packed 4 to a case. We suggest buying a case quantity of 4 to reduce the chance of breakage in transit.
Please note: the example image shows a unit with continuous threads. These jars have a lug finish.
Wide mouth jar for small batch fermentations or storing pickled food items
Large 4.3" diameter opening
110 mm continuous thread neck (lid not included)
128 oz (1 Gal) capacity
Widemouth glass jars are great for fermenting small batches of fruit wines, beer, vinegars, lacto fermented foods, and more. The 110 mm (4-3/8") wide opening is large enough to add product, and to reach your hand in for cleaning.
Lids are not included, see our 110 mm plastic lid: JAR01A. 1 gallon widemouth jars are sold individually, and come packed 4 to a case. We suggest buying a case quantity of 4 to reduce the chance of breakage in transit.
Want an easy way to brew coffee on the go? These disposable coffee maker bags make brewing coffee easy, even when on the go! All you need is coffee grounds and water and you can brew about 2 cups of coffee with each bag.
Making a batch of cold brew coffee has never been simpler. The Toddy® Cold Brew System is a non-electrical coffee maker that produces a smooth, rich, delicious liquid concentrate used to make steaming hot coffee, and iced and iced blended coffee drinks - one cup at a time and at the strength you prefer. It also can be used to brew tea. The Toddy® Cold Brew System is BPA Free.
By allowing time to replace heat, Toddy's deceptively simple cold water filtration process extracts the coffee bean's true delicious flavor yet leaves behind much of the acidity - 50-67% less than coffee concentrates brewed by conventional hot-brewed extraction methods (e.g., Mr. Coffee system).
Includes:
Brewing Container
Glass Decanter
Decanter Lid
Brewing Handle
2 Toddy Filters
1 Rubber Stopper
3 sample Paper Filter Bags
Are you ready for unbelievably rich and flavorful coffee? The french press (or "cafetiere" in the UK, and "plunger" in Australia) is considered by many to provide the quintessential coffee drinking experience.
Because the water is always in direct contact with the coffee grounds, essential oils and flavor compounds normally left behind in the paper filter remain in the coffee. After pushing down the stainless steel plunger/screen, you are left with an incredibly robust, remarkably flavorful, and richly aromatic cup of coffee.
We recommend using a courser grind setting for your beans so that the screen is able to remove the majority of coffee solids.
Features a polypropylene handle, with borosilicate glass and a stainless plunging/filtering system. It has a domed lid to seal in the aroma and maintain temperature. 8-cup french presses are ideal for serving 2-4 people. As with all of our french presses, it is completely dishwasher safe.
The KOMOS Stout & Cold Brew Coffee Kegerator comes with NukaTap faucets with Stout Spout attachments to give your beverage an extra creamy pour. Every unit also comes with an adapter to use the included KOMOS CO2 regulator with a Nitrogen gas cylinder. For each faucet, you will also receive the standard faucet spout so you can mix and match your taps and use some for Stout or Cold Brew and some for serving beer, soda, or other beverages.
Serving with Nitrogen
Nitrogen cylinders can be filled with either pure nitrogen or "Beer Gas", which is a blend of Nitrogen and CO2. Pure nitrogen is recommended for serving cold brew coffee in order to avoid the effects of carbonation. Carbonic acid dissolving into solution will change the mouthfeel of your cold brew and heighten the acidity and bitterness. Stouts, on the other hand, are commonly served with a mix of Nitrogen and CO2, and will give your pours that signature Guinness-like cascade of bubbles as CO2 is knocked out of solution when it passes through the stout spout's aerator disc. Beer gas can also be used to serve other styles of beer, or you can feed a pure CO2 line into the kegerator from a separate CO2 tank.
Please note that the kegerator only includes one regulator and does not include a nitrogen cylinder. An empty nitrogen tank can be added to your order above. If you plan to use two different types of gas, you will need to purchase a second regulator and gas cylinder.
NukaTap Forward Sealing Faucets
NukaTap is the newest brand of forward sealing faucets that boast a lower thermal mass for reduced first pour foam. They feature a "nuke-shaped" internal shuttle that is made from TPV, which provides superior laminar flow to further reduce foaming issues. If you prefer all stainless steel components in your beer faucet, we would suggest the kegerator configuration that comes with Intertap faucets. All faucet spout attachments and accessories are cross compatible between Intertap and NukaTap.
KOMOS Kegerator
The KOMOS Kegerator offers a stunning set of features that clearly separate this unit as the most modern kegerator on the market. With more interior space than other models, the KOMOS Kegerator is designed to fit up to four 5-gallon Slimline Torpedo kegs or Pepsi-style Ball Lock Corny kegs. Whether you choose the single, double, triple, or quad tap configuration, you'll receive NukaTap stainless steel faucets, the newest in forward-sealing faucet design. Stainless faucets are a huge upgrade over the chrome-plated brass faucets commonly included with other kegerators, and you'll quickly recognize the quality of a forward-sealing beer faucet compared to the standard taps seen at your local tavern or in-law's mancave. Rather than a chrome plated tower, the NukaTap faucets are mounted to a stainless steel tower that remains cool before, during, and after each pour thanks to a tower fan diverter that recirculates cold air within the kegerator and blows it up into the tower to keep your beer lines cold and reduce foaming. From keg to faucet, your beer will pass through EVABarrier draft lines, a premium double-walled tubing designed to protect against beer oxidation. And with Duotight push-to-connect fittings, you'll have your lines connected in a snap with no need to force the tubing over barb fittings or fiddle with hose clamps. Other features you'll love about the KOMOS Kegerator include its highly-efficient cooling capacity so you'll be serving ice cold beer even in the warmest temperatures, extra wide temperature range from 26–82°F, dual gas inlets at the back, aluminum internal floor, rolling casters, and the included KOMOS Dual Gauge CO2 regulator.
The most eye-catching difference between the KOMOS unit and other kegerators is definitely the capacity. This is the first kegerator we have offered that comes with a quadruple tap tower option, and that’s all thanks to the redesigned interior. Most kegerators position the compressor on the right or left side of the inside floor, making one side shallower than the other. KOMOS positions the compressor in the middle so both sides of the interior have an equal depth. This seemingly small detail allows the unit to hold up to four 5-gallon Slimline Torpedo or Ball Lock Corny kegs.
Dual gas line inlets are absolutely clutch if you want to serve beverages at two different pressures or use two different types of gas. The previous model had one inlet that was only wide enough for a single line to pass through. Now both inlets are just over 3/4" in diameter and feature PCO 1881 threads. This threading allows you to use the plastic Carbonation Ball Lock Cap (FE133) as a quick connect option for your gas lines.
Upgraded condenser, evaporator, and insulation make this unit highly efficient, yet quiet, so you can serve ice cold beer in even the warmest temperatures. The unique internal fan provides excellent air circulation, pulling cold air from below the evaporator and blowing it back over the top of your kegs and up into the tower to chill your draft lines.
Extra Wide Temperature Range is Perfect for Homebrewers
The KOMOS kegerator is tailored to a homebrewer's needs. Take, for example, the extended range digital controller with an adjustable temperature range from 26 - 82°F. This allows homebrewers to use as fermentation chamber and is something that other kegerators don't do. Although the unit does not provide heating, the extended range allows you to program the internal temperature at say an ale fermentation temp of 68°F and will provide cooling whenever the temp rises above that set point. With the insulation provided by the kegerator, heating should rarely be needed, but you can always place a low wattage heat wrap inside the unit if ever needed. The digital controller always displays the temperature and is easily adjusted from the front of the kegerator with the door closed. It's pretty nice.
NukaTap Stainless Faucets and Towers
All kegerators come with either NukaTap faucets for mounting on the stainless tower. NukaTap is the newest brand of forward sealing faucets that boast a lower thermal mass for reduced first pour foam. They feature a "nuke-shaped" internal shuttle that is made from TPV, which provides superior laminar flow to further reduce foaming issues. If you prefer all stainless steel components in your beer faucet, we would suggest the kegerator configuration that comes with Intertap faucets. All faucet spout attachments and accessories are cross compatible between Intertap and NukaTap. Forward-sealing means that while in the closed position the faucet will keep beer in it instead of draining out. This keeps the internal parts from getting sticky and reduces the chance of off flavors transferring to your beer while you pour. The modular, threaded spout can fit a variety of attachments including a growler filler or stout spout. This model includes the all stainless faucet which we think is a must have upgrade over chrome plated brass.
Duotight Fittings & EVABarrier Draft Tubing
Duotight and EVABarrier have revolutionized how you connect draft line, and our kegerators come standard with both. We love Duotight push-in fittings for their quick connection, reliable seal, and versatility. Setting up and connecting draft line has never been easier -- no more hose clamps or heating water to soften tubing! Each kegerator comes with Duotight fittings for the tower shanks, regulator, and for splitting gas lines (double & triple tap only). We recommend adding Duotight fittings to use for your keg connections as well. Depending on whether you'll be serving from homebrew kegs or commercial sanke kegs, you'll need two DUO106 or two DUO104 per line.
EVABarrier tubing has been engineered with protection in mind and is both PVC-free and BPA-free. This double walled tubing offers superior protection against oxidation, CO2 loss, and microbial growth. EVA tubing is the future of draft line for professional applications, and now your kegerator will feature the same first-class tubing.
KOMOS Regulator
The included high quality KOMOS regulator maintains consistent pressure. The regulator includes a blow-off PRV with pull ring for safety and relieve pressure, rubber coated gauges, and a hand knob for easy adjustment. Included with your kegerator package is a Duotight fitting that attaches to the regulator for an easy, solid, push-to-connect connection with your gas line.
Added Features
One of the unique features on a kegerator in this price range is the tower fan, which blows cold air up into your tower to reduce foaming issues. They also come standard with the KOMOS dual gauge CO2 regulator, which is super beefy and consistent in delivering accurate pressures. Most Chinese-made regulators experience creep where the pressure increases over time. The KOMOS regulator is by far the best CO2 regulator we have seen made in China.
The countertop drip tray couldn't be easier to keep clean. Built-in drip trays look cool, but they're a pain to keep clean. Before long they get pretty disgusting with dried, spilled beer -- attracting fruit flies and becoming a haven for mold and bacteria to grow. They'll often overflow the reservoir inside the kegerator causing a huge mess. Our kegerator's tray is designed to be removed and easily washed.
Best Value & Backed by MoreBeer!
We've looked around, and when you factor in fast and free shipping, you are getting the very best value on a kegerator in the USA. Plus you're getting MoreBeer! service if something happens in shipment. We double box the unit with foam pads and have very little shipping damage. However, it will be delivered via Fed-Ex ground so damage is possible. If your unit arrives damaged just call us up and we will work with you to take care of it.
Feature Summary:
Stainless Steel Forward-Sealing Faucets (choose number of taps above)
Stout Spouts and Standard Spouts for each faucet
Robust KOMOS Dual Gauge CO2 Regulator with included Nitrogen tank adapter
Stainless Steel Air Cooled Tower
Duotight Fittings make connecting draft lines a breeze
Digital Thermostat with wide 26 - 82° F temp range.
CO2 Tank holder mounts on back of kegerator (tank not included)
Efficient and powerful compressor
Stainless Steel Door
Countertop Style Drip Tray
Aluminum floor for additional keg support
Includes EVABarrier beer and gas tubing
Beverage line measures 4mm ID x 8mm OD
1 x 1.7m length of line per tap
Gas line measures 5mm ID x 8mm OD
1 x line of varying length depending on number of taps (2, 2.5, or 3m)
4 Tap model includes uncut rolls of bev & gas line
We recommend cutting bev lines to 1.7-2m lengths (5.5-6.5 ft.)
Gas lines can be cut to whatever length best suits your needs
Duotight adapters for draft shank and regulator connections
Duotight tee fittings for splitting gas lines (2, 3, 4 tap only)
You will need to purchase keg connections depending on whether you are serving commercial sanke, ball lock corny, or pin lock corny
For ball lock and pin lock disconnects we recommend DUO106
For commercial sanke keg couplers we recommend DUO104
Available Kegerator covers and "off road" casters for moving over uneven terrain
Detailed instructions on assembly and use
Specifications:
23.75" wide
25" deep
31.5" with CO2 mount
32.5" Tall (fridge only)
35" with Caster wheels
48.75" with tower
51" with Casters and Tower
110 v - 60 hz
0.8 Amp draw
Optimal ambient temperature is 65°F – 80°F
CSA Certified
Internal Dimensions:
19.5" wide
17" deep
16" down the center where compressor sits
28.5" tall
What Fits:
5 Gal. Torpedo Keg - 3
5 Gal. Slimline Torpedo Keg - 4
6 Gal. Torpedo Keg - 3
5 Gal. Megamouth Torpedo Keg - 1
5 Gal. Pin Lock Cornelius Keg (Corny Keg) - 3
5 Gal. Ball Lock Cornelius Keg (Corny Keg) - 4
5.2 Gal. Oxebar PET Keg - 3
5.16 Gal. Sixth Barrel Keg (Sixtel, Log) - 3
7.75 Gal. Quarter Barrel Keg (Pony Keg, Stubby Quarter) - 1
7.75 Gal. Slim Quarter Keg (Tall Quarter, The Slim) - 1
15.5 Gal. Half Barrel Keg (Full Size Keg) - 1
See below for the Kegerator Instruction Manual.
Lowest Price Guarantee, this item has MAP pricing so you can be confident you won't find it for less.
Please note: This unit requires 4" of clearance on all sides and is not intended to be installed under a countertop. For a build-in unit, see the KOMOS Pro Stainless Steel Kegerator.
Stand-Up Design: The bladder's thick, rigid material allows it to stand upright, making it easy to fill with your favorite drinks and dispense them effortlessly
Keeps Beverages Fresh: A durable, multilayer film with an oxygen-blocking foil layer and a PE interior prevents oxidation and moisture loss, preserving the freshness and flavor of your beverages
Versatile for Many Drinks: The KegLand bladder is designed to hold a variety of non-carbonated beverages, from wine and spirits to coffee and cocktails, offering a simple solution for serving any of your favorite drinks
Serve your favorite non-carbonated drinks effortlessly with the KegLand 5L Stand Up Bladder. This versatile bladder is perfect for dispensing a wide range of beverages, including:
Wine
Spirits and Liqueurs
Coffee
Non-carbonated cocktails
This bladder is made from a durable, multilayer film. The interior layer of PE and an exterior foil (Mylar) layer work together to completely block oxygen and prevent moisture loss, keeping your drinks fresh. The material is also thick and rigid, allowing the bladder to stand upright on its own for easy filling and dispensing.
Please Note: This product is not suitable for beverages with an alcohol by volume (ABV) higher than 22%. A different, higher-density PE internal liner is required for higher ABV products.
KegLand Part Number: KL41287
These have a polypropylene handle and base, with borosilicate glass and a stainless plunging/filtering system. It has a domed lid to seal in the aroma and maintain temperature. This little guy makes a perfect mug of coffee - ideal for one person.
Minimize oxygen exposure by flattening the bag before filling to keep your wine, cider, spirits, or cold brew as fresh as the day it was made
This cost-effective tool connects easily to your existing brewing setup with a standard ball lock post, making it a simple and quick solution for refilling bladders without expensive machines
Fill your bag-in-box bladder directly from your brewing vessel. The clever design means the bladder's tap is already in place when full, so it's ready to dispense immediately without extra steps or mess
Tired of tricky transfers that risk oxidizing your wine, cider, spirits, or cold brew? The Bag-In-Box Bladder Refill and Transfer Connector simplifies the process, making it easy to fill bladders without losing quality.
This cost-effective tool lets you forget expensive filling machines and get straight to the good stuff. It's designed to be simple and effective.
Key Features:
Easy Filling: Connect the device to your bladder's tap, engage the knob, and fill it just like you would a keg through the yellow ball lock post.
Minimized Oxidation: Before filling, you can flatten the bag to remove all oxygen, ensuring your beverage stays fresh and delicious.
How it works: Simply attach the connector to your bladder's tap. The ball lock post lets you fill from your brewing setup, making the process quick and seamless. Once full, the tap is already in place for easy dispensing.
KegLand Part Number: KL39253
Quickly and securely connect to any VITOP tap on Bag-In-Box (BIB) bladders, creating a leak-free seal for seamless beverage transfer or refilling in seconds
This connector's straightforward design makes it exceptionally easy to attach, detach, and clean, streamlining your beverage handling process
Designed to work perfectly with 5L Stand Up Bladders, ensuring a reliable and efficient connection for a variety of popular bladder sizes
The Kegland Bag-In-Box Bladder Refill or Transfer Connector is an incredibly easy and efficient way to connect to your Bag-In-Box (BIB) bladders. This connector creates a secure and leak-free connection to any VITOP tap, allowing you to transfer or refill beverages in just a few seconds.
Whether you're a commercial establishment like a pub, cafe, or restaurant, or you just want to transfer beverages at home, this connector makes the process a breeze. Its simple design makes it incredibly easy to attach, detach, and clean.
Works perfectly with the 5L Stand Up Bladders.
Also available with a convenient Ball Lock Post attached.
KegLand Part Number: KL40013
Experience the evolution of cold brew with the SS Brewtech Cold Brew Recirculation Standard System, a stainless steel, pro-grade setup designed to extract maximum flavor in a fraction of the time. Using a gentle recirculation process inspired by professional brewing techniques, this system reduces brew time from the typical 16 hours down to as little as 4, without sacrificing the smooth, balanced character that cold brew lovers crave.
The compact design mounts the recirculation module, pump, and controller directly to the Brew Bucket and perforated basket, creating a clean, space-saving configuration that’s easy to set up and operate. Built from 304 stainless steel, it’s durable enough for daily use while maintaining a polished, professional appearance.
Capable of brewing up to 5 pounds of coffee and yielding around 3.5 gallons of cold brew concentrate per batch, it’s ideal for home enthusiasts, offices, or small cafés looking for quality and efficiency in one system. The integrated pump runs on standard household power, delivering reliable, consistent recirculation without the need for high-wattage circuits.
From its precision build to its time-saving performance, the SS Brewtech Cold Brew Recirculation Standard System is the smarter way to brew cold coffee—fast, clean, and full of flavor.
What's Included:
Recirculation Module
7 gal Brew Bucket Classic
Cold Brew Bucket Kit
Specs:
5 lb max coffee volume
3.5 gal max coffee concentrate output
Assembled dimensions 12.5" x 12.5" x 26"
Self-contained brewing system purpose-built for producing large batches of cold brew coffee
Cold brew temperature is maintained via coolant circulated around the jacketed tank
Rake system ensures all coffee grounds and water are thoroughly and evenly mixed
Built-in pump recirculates and clarifies the coffee when extraction is complete
217 Gallon system and above feature coffee ground hydrator and integrated brew deck
For detailed power specs, dimensions, and shipping quotes contact our MoreBeer! Pro sales representatives today!
The MB Cold Brew Coffee System is a self-contained electric brewhouse used for producing commercial batches of cold brew coffee. After coffee grounds and water are added to the tank, the mixing rake system ensures even distribution and full infusion of grounds and water. Program your preferred brewing temperature between 35-80°F, and the controller will automatically circulate coolant through the tank's cooling jacket to maintain your set temperature. When extraction is complete, the coffee is recirculated until it runs clear, and then passed through a filter on its way to a holding tank where it can be stored until packaging.
For additional filtration when transferring liquid to your holding tank, check out the optional Filter Tank.
Features:
Button control panel
Glass grant w/ CIP
Viewing port
Coffee ground hydrator (7 bbl & above)
Brew deck (7 bbl & above)
CIP ring below the tank to clean the underside of the screen (7 bbl & above)
Liquid level sight gauge
Built-in centrifugal pump
Pipeline sight glass
Square manway & chute
All tri-clamp butterfly valves / fittings included
208V 60Hz, 3-Phase
Required Power:
31 Gal: 1.3 kW
62 Gal: 1.5 kW
93 Gal: 1.5 kW
155 Gal: 1.85 kW
217 Gal: 1.85 kW
310 Gal: 3 kW
Approximate Dimensions:
Length (in.)
Width (in.)
Height (in.)
31 Gal
63
49
71
62 Gal
65
63
77
93 Gal
69
67
85
155 Gal
77
69
93
217 Gal
93
73
98
310 Gal
98
79
102
Provides an extra layer of filtration for clearer cold brew
Tilting design allows for easy removal of sediment and simplifies cleaning
Mobile stainless steel cart with locking wheels for convenient movement
The optional filter tank is designed for seamless integration with the MB Cold Brew Coffee System. This unit provides an additional stage of filtration as liquid is transferred from the brewing system to a fermenter or holding tank. It features a removable 6.5-micron filter screen for effective particulate removal. The tank's tiltable design facilitates efficient solid removal and simplifies post-use cleaning. Integrated components include a pressure gauge for monitoring filtration pressure and a tri-clamp sight glass for visual clarity assessment. The filter tank is mounted on a robust stainless steel cart frame equipped with four locking casters, ensuring ease of mobility within your facility.
Features:
Tiltable filter tank
3mm thick tank body
6.5-micron filter mesh
Pressure gauge
Sight glass
Rolling casters with brakes
Tri-clamp fittings included
The Bodum® Brazil 8 cup French Press is a classic french press that has been sold for decades. Enjoy rich coffee with full flavor. Features a polypropylene handle and base, with borosilicate glass and a stainless plunging/filtering system. It has a domed lid to seal in the aroma and maintain temperature. 8-cup french presses are ideal for serving 2-4 people.
