Wine Making Equipment

Use in conjunction with an Enolmatic or Enolmaster filler to filter wine inline as you are bottling. Saves time by eliminating a separate step and allows you to filter without using a pump or exposing your wine to oxygen. This filter unit is placed inline between the product and the filler itself. Filters are available in 5, 1 and .5 micron ratings. The filter cartridges used with this housing can be cleaned and re-sanitized for future useage. Wash by running PBW (CL25) followed by a hot then a cold rinse. Re-sanitize immediately after washing and then again just prior to the next use with SaniClean (CL27).

Read more less

Replacement spigots for the maintenance of your cherished wooden aging barrel.   A wooden barrel spigot is something that will need to be replaced from time to time. This wooden barrel spigot features a wooden handle and spout, and a plastic valve insert. Spigots are sold individually, with no packaging.    The #4 spigot is approximately 8-3/4" long and 27 mm (1 1/16") at the small end.  

Read more less

Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. This stainless steel cart makes it easy to wheel around your pump and is small enough to fit into tight spaces. Comes with pre-drilled holes for mounting. Compatible with Euro 20 and Euro 30 flexible impeller pumps.

Read more less

Replacement spigots for the maintenance of your cherished wooden aging barrel.   A wooden barrel spigot is something that will need to be replaced from time to time. This wooden barrel spigot features a wooden spout and a plastic valve insert. Spigots are sold individually, with no packaging.    The #0 spigot is approximately 5-1/2" long. The shaft tapers from 16 mm (11/16") at the small end, up to 24 mm (15/32") wide.      

Read more less

This reagent bottle replenishes the TA titrant (0.133N NaOH) found in the SC-200 and the SC-300 Analyzer kits. To avoid cross-contamination with other reagents, use a dedicated syringe to dispense the NaOH reagent. Store reagents in a dark, cool place with the bottle tightly sealed to maximize shelf life. Good for about 12 tests. Guaranteed for 6 months. To avoid cross-contamination with other reagents & solutions, use a dedicated pipette or pour the TA titrant into another container. Store solution in a dark, cool place with the bottle tightly sealed to maximize shelf life. Please note: some bottles of TA Titrant may show 100mL as the volume. This is a misprint. The true volume is 130mL.

Read more less

WineStix are a new form of oak integration for wine, designed to give new barrel flavors with an extraction time similar to cubes. The combination of Short and Long grains result in amazing gradience of flavor similar to barrels, while extracting significantly quicker! These are Light toast North American Oak staves, and depending on the wine, will impart flavors of light vanillin, almonds, coconut, and fresh oak. This is a two pack of WineStix, sized specifically for a 5-6 gallon carboy of wine. WineStix will easily fit through the mouth of a glass carboy, and can be attached to a string via the drilled hole for easy removal! One carboy Winestix will treat 5-6 gallons of wine.

Read more less

Replacement siphon starter bulb for 3-spout and 5-spout bottle fillers. This is included in our WE602 and WE605 stainless steel bottle fillers, and can be purchased as an option upgrade for the WE604 painted filler. This siphon starter will save you a lot of hassle, and allow you to start a siphon in the fillers tubes while maintaining sanitary conditions.  The siphon starter features a food grade plastic bulb and tubing, and a black rubber "boot" that fits tightly around the end of the bottle filler tubes. To use: Connect your bottle filler to the wine source and allow the reservoir to fill. Sanitize the siphon starter, inside and out Squeeze the bulb to remove most of the air. Fit the rubber "boot' or base around the end of the bottle filler tube. The hole in the boot must line up with the hole where the wine will come out. Gently press down on the filler tube so that the gasket is not touching the inside wall. Slowly let go of the pressure on the bulb. The bulb will suck the air out of the tube, and wine will follow. Stop when you can hear or feel wine going into the bulb siphon starter. Repeat for each filler tube you would like to use. Wash, sanitize, and dry the siphon starter bulb before storage  

Read more less

A fantastic price on a "Rhone/Burgundy" style bottle that has been traditionally used for Syrah, Petite Syrah, Pinot Noir, Grenache, Mourvedre, Chardonnay, Sauvignon Blanc in the Loire tradition ("Fume Blanc"), Viognier, Gewurztraminer, and Roussanne. You can use it for any wine you make. 12 per case. Bottle Specifications: Capacity: 750 ml Weight: 1 lb Height: 11.65 inches Outside Diameter: 3.2 inches  

Read more less

Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more in early February. Replaces the entire fill nozzle assembly on the WE620 Enolmatic Bottle filler, including the support arm and spring.

Read more less

0.5 Micron Absolute Rated Washable and Reusable High Quality PE Filter Compatible with both the Enolmatic and Enolmaster filters Use with the Enolmatic or Enolmaster filter. These filter cartridges can be cleaned and re-sanitized for future useage. Wash by running PBW (CL25) followed by a hot then a cold rinse. Re-sanitize immediately after washing and then again just prior to the next use with SaniClean (CL27). Can be used to Filter approximately 15 gallons at a time assuming the wine is previously filtered by rougher filtration like 1 or 2 micron filters

Read more less

Replacement spigots for the maintenance of your cherished wooden aging barrel.   A wooden barrel spigot is something that will need to be replaced from time to time. This wooden barrel spigot features a wooden spout and a plastic valve insert. Spigots are sold individually, with no packaging.    The #6 spigot is approximately 10-1/4" long and 34 mm (1-11/32") at the small end.      

Read more less

Stainless steel spigot with quarter-turn ball valve. 1/2 in male BSP threads.

Read more less

After using the Italian crusher/destemmer units for many years ourselves, we designed and manufactured a special accessory stand that is just tall enough to allow grapes to drop directly into your fermenter or transfer container. Many customers opt to use our 32 Gallon food-grade containers (which we sell as WE509). A regular garbage can can be placed at the end of the unit to collect stems. By using the stand you eliminate the need to move the must and stems from container-to-container, thus saving time and energy. This model fits our WE220 and WE223 series of EnoItalia Crusher/Destemmers. Does not fit models from other manufacturers. Please Note: This stand comes broken down, and will require assembly. Estimated Overall dimensions: Footprint: 32 1/4" long x 22" wide Height: 40" high. Top Tray Inside dimensions 32" long x 14" wide

Read more less

Replacement impeller for the Euro 20 pump. In documents tab: Position: 7

Read more less

Rugged punch down tool at a fantastic price. Exterior 1" diameter 304-type stainless tubing is polished to a mirror finish. Bottom disc is 12" in diameter with four large holes to decrease pressure during punch down. Features Polished Finish 12" disc made from 10 gauge thick stainless Capped/Sealed ends for easy cleaning and sanitizing Constructed from 304-type stainless steel Actual weight is 7lbs. Shipping weight is calculated at 70 lbs because these ship at FedEx oversize 2 rates. 72" Height

Read more less

Used to stir up lees in a barrel or to ensure a complete mix of so2 or any other addtives, our stainless steel lees stirrer with 24" solid stainless shaft and fold out stainless paddle will get the job done quickly and efficiently.  Connect to drill and use on lowest speed. Included black plastic bung seals barrel while stainless shaft spins freely. 

Read more less

Replacement spigots for the maintenance of your cherished wooden aging barrel.   A wooden barrel spigot is something that will need to be replaced from time to time. This wooden barrel spigot features a wooden spout and a plastic valve insert. Spigots are sold individually, with no packaging.    The #1 spigot is approximately 6 5/16" long and 18 mm (23/32") at the small end.      

Read more less

Put one feed line into this filler from your fermenter or barrel and fill three bottles at once. Unit comes included with a Siphon Bulb for conveniently starting a siphon from the holding tank to each filler spout. Each bottle fills independently of one another to allow for staggered filling (take one bottle off as another is filling). Fill is initiated when bottle is lowered onto filling spout and locked into place with built-in bottle neck clasp. The flow of liquid will stop automatically when the level of liquid in the bottle reaches the liquid level in the reservoir.  The clasps around each fill head will hold the bottles in place during filling. Spouts feature a unique design that eliminates dripping when bottle is removed. A float valve keeps the wine level constant in the wine reservoir at all times. Each spout fills about two bottles per minute. Built-in drain allows for easy cleaning. All metal parts are made from 304-type stainless steel. Replacement fill spout seals are available. 15L reservoir.  

Read more less

Hand operated unit crushes grapes and separates stems in one pass Stainless steel basket is removable for easy cleaning Fiber reinforced nylon fly-wheel  Aluminum rollers Made in Italy by EnoItalia This hand-cranked Crusher/Destemmer is perfect for the home winemaker processing small batches or is working in conjunction with friends who don't mind a little manual work! As the unit is cranked, the grapes are pulled by the agitator into the rollers where first the grapes are crushed. Next, they fall into the stainless basket where a rotating shaft with paddles separates stems from grapes. The crushed and de-stemmed grapes then fall through the basket while simultaneously the stems are pushed out the end and into a refuse can. All of our units feature removable easy-to-clean stainless baskets (grates) where the grapes fall through after having been crushed. The Crusher/Destemmer can be purchased by itself or alongside the Stainless Stand & Chute. Features: Enamel coated body, bin, and agitator 304-Type Stainless Steel Basket (can be removed for easy cleaning) Fiber reinforced nylon fly-wheel  Aluminum Rollers Output is speed is as fast as you can crank Replacement parts available Color of enamel may vary Product Dimensions 48"Lx27"Hx20"W How to Assemble the Optional Stand & Chute:

Read more less

Stainless steel spigot with quarter-turn ball valve. 3/4 in male BSP threads.

Read more less

WineStix are a new form of oak integration for wine, designed to give new barrel flavors with an extraction time similar to cubes. The combination of Short and Long grains result in amazing gradience of flavor similar to barrels, while extracting significantly quicker! These are Dark toast North American Oak staves, and depending on the wine, will impart flavors of toasted oak, dark chocolate, subtle black pepper, and carmelized characters. This is a two pack of WineStix, sized specifically for a 5-6 gallon carboy of wine. WineStix will easily fit through the mouth of a glass carboy, and can be attached to a string via the drilled hole for easy removal! One carboy Winestix will treat 5-6 gallons of wine.

Read more less

Start making great wine at home with a small investment in some quality equipment. This inexpensive starter package includes all the equipment you will need to begin making wine with VineCo's extensive line of concentrate kits. These kits are designed to make 23 liters of wine, or about 6 gallons. Primary fermentation will take place in the included 7.9 gallon bucket. After the primary fermentation is complete you will transfer the wine into the included 6 gallon carboy leaving behind the sediment from fermentation. We have included all the necessary cleaning and testing equipment. Also included are corks and a corker for bottling and corking your own wine. You will need to purchase a wine concentrate kit. You will also need to save or buy approximately (30) 750ml wine bottles (2.5 cases). Included In Kit: 7.9 gallon food grade bucket and lid with airlock hole 6 gallon plastic carboy for aging Airlock and stopper 7/16" Siphon assembly Bottle brush Sample taker/thief Triple scale hydrometer Bottle filler with removable spring Bottle corker 100 Corks - 1 3/4 in. One Step Cleanser  

Read more less

Replacement spigots for the maintenance of your cherished wooden aging barrel.   A wooden barrel spigot is something that will need to be replaced from time to time. This wooden barrel spigot features a wooden spout and a plastic valve insert. Spigots are sold individually, with no packaging.    The #2 spigot is approximately 7-5/64" long and 24 mm (61/64") at the small end.      

Read more less

Replacement air tubes for variable capacity tanks. 50 cm tube fits Marchisio 100 - 200 Liter tanks.   Please note: These tubes are only compatible with Marchisio brand tanks. They will not work with Speidel or other brands of variable volume tanks.

Read more less

Flexible impeller pump for moving wine or juice Stainless steel pump head with 1.5" tri-clamp connections On/off switch for easy operation 4.4 gallons per minute flow rate Pre-wired with 110V plug Made in Italy by EnoItalia This version of the Italian-made Euro 20 features a pre-wired 110V plug. Unlike the 220V model, this pump is ready for use and does not require a plug to be wired to a bare cord. The Euro 20 is a great pump for smaller production. Featuring a SS head with 1.5” TC fittings, this flexible impeller pump is great for moving wine or juice. We have this pump set up with a forward and reverse on/off switch on the body, simplifying operation.  This unit comes with mounting points for if you want to mount it to a cart or filler/filter. Features: Flow rate is 4.4 gpm Max Pressure: 46 PSI (3.2 BAR) 1.5" Tri-Clover inlet and outlet 110V single phase Pre-Wired Plug 0.5 HP motor 1.7 amps Recommended temperature range: 40 - 150°F (5 - 65°C) SS head w/ Flexible Impeller    

Read more less

Rugged punch down tool at a fantastic price. Exterior 1" diameter 304-type stainless tubing is polished to a mirror finish. Bottom disc is 12" in diameter with four large holes to decrease pressure during punch down. Features Polished Finish 12" disc made from 10 gauge thick stainless Capped/Sealed end for easy cleaning and sanitizing Constructed from 304-type stainless steel Actual weight is 5lbs. Shipping weight is 30lbs as these ship out as a UPS oversize 1 package. 46" Height

Read more less

Replacement spigots for the maintenance of your cherished wooden aging barrel.   A wooden barrel spigot is something that will need to be replaced from time to time. This wooden barrel spigot features a wooden spout and a plastic valve insert. Spigots are sold individually, with no packaging.    The #3 spigot is approximately 8" long. The shaft tapers from 24 mm (15/16") at the small end, up to 32 mm (1-1/4") wide.      

Read more less

A replacement lid for the rear overflow reservoir on the Enolmatic filler. Includes the float assembly which breaks the vacuum and stops filling if the reservoir becomes full to prevent messy overflowing.

Read more less

Replacement air tubes for variable capacity tanks. 65 cm tube fits Marchisio 300-400 Liter tanks, and the wide format 200L tank.   Please note: These tubes are only compatible with Marchisio brand tanks. They will not work with Speidel or other brands of variable volume tanks.

Read more less

WineStix are a new form of oak integration for wine, designed to give new barrel flavors with an extraction time similar to cubes. The combination of Short and Long grains result in amazing gradience of flavor similar to barrels, while extracting significantly quicker! These are Dark toast French Oak staves, and depending on the wine, will impart flavors of dark coffee, some carmelized sweetness, and a roasty smokey character that will compliment big blockbuster varietals. This is a two pack of WineStix, sized specifically for a 5-6 gallon carboy of wine. WineStix will easily fit through the mouth of a glass carboy, and can be attached to a string via the drilled hole for easy removal! One carboy Winestix will treat 5-6 gallons of wine.

Read more less

Get the functionality of a 3 spout gravity filler for a fraction of the price.  These fillers are a great alternative to more expensive fillers, while still allowing you to bottle at a quick rate.  For a more robust model in Stainless Steel, see our WE602. These 3 spout models have an internal float mechanism to keep the reservoir full.  3 individual nozzles allow for independent filling of bottles.

Read more less

Replenishes the SO2 Titrant provided with the SC-100 and SC-300. Good for up to 50 tests. Guaranteed for 6 months. To avoid cross-contamination with other reagents, use a dedicated pipette to dispense the acid reagent. Store reagents in a dark, cool place with the bottle tightly sealed to maximize shelf life.

Read more less

Motorized unit crushes grapes and separates stems in one pass All parts that come into contact with the grapes are made from stainless steel Screw Feed provides fast, continual hands-free operation Self-adjusting rubber rollers are soft on grape stems to reduce tannin extraction 3,000 lbs per hour production capacity Made in Italy by EnoItalia A great value in our motorized Crusher Destemmer line as the parts that are in direct contact with the grapes are stainless while the main body and motor/gear shroud are made from enamel coated steel. Performance is exactly the same as our WE223S Model. The Crusher/Destemmer can be purchased by itself or alongside the Stainless Stand & Chute. How These Work: Grapes are loaded into the top bin where the powered screw feed continually pushes grapes towards the rollers. Grapes are gently crushed by the rubber rollers and then fall into the destemming chamber. The destemming chamber features a removable basket with a bunch of circular holes in it and rotating destemming shaft. Grapes fall through the holes into your bucket. Stems get rotated through the basket by the destemming shaft until they exit at the end of the machine where they fall onto the ground or an awaiting bucket. Rubber Rollers This model features soft rubber rollers which are softer on stems possibly reducing rough tannins in your wine. The rollers are spring loaded and self adjusting to protect against damage, such as the accidental passing of a small stone.  Output Production Powered by a 1hp motor that provides an hourly production of approximately of up to 3,000 lbs. Note that these machines must be fed with consistency to reach maximum throughput. Overload the machine with too many grapes at one time and the motor will pause and actually slow down production. Cleaning Remove two quick bolts and the safety cover slides off and the internal stainless destemming grate slides out for easy cleaning. The hose out the rest of the unit. Comes with directions. WE223PS Features: 1) 304-Type Stainless Steel Receiving Bin, Screw Feed, and Destemming Basket 2) A Screw Feed drive receiving bin for continual, faster, hands-free operation 3) Adjustabe Rubber Rollers (adjustment on all small machines, regardless of make, is limited to 5mm because of the way the gears mesh.) 4) Solid Construction 5) A powerful 110V 1HP motor which provides an hourly production of approximately 3000 lbs. 6) Replacement parts are available 7) Big, Red Emergency stop button on motor shuts down the machine in a hurry to help reduce chance of accident Overall dimensions: 47" long x 19.6" wide x 25" high. Weight: 118 pounds (54KG.) Figure 158 lbs for shipping weight with pallet.    

Read more less

Replacement (pyramid) end plate for the Buon Vino Super Jet Filter. If you love the brilliance you get when you filter with the Buon Vino Super Jet Filter you’ll be thrilled to know that you can get replacements parts for maintenance and repair! This is a replacement end-plate for the Buon Vino Super Jet filter. It features a one-sided filter plate with a pyramid shaped back for use with the metal plate on the filter.

Read more less

Put one feed line into this filler from your fermenter or barrel and fill three bottles at once. Unit comes included with a Siphon Bulb for conveniently starting a siphon from the holding tank to each filler spout. Each bottle fills independently of one another to allow for staggered filling (take one bottle off as another is filling). Fill is initiated when bottle is placed onto filling spout and set down on the bottle tray. The flow of liquid will stop automatically when the level of liquid in the bottle reaches the liquid level in the reservoir.  The bottle will rest upon the bottle tray during filling. Spouts feature a unique design that eliminates dripping when bottle is removed. A float valve keeps the wine level constant in the wine reservoir at all times. Each spout fills about two bottles per minute. Built-in drain allows for easy cleaning. All metal parts are made from 304-type stainless steel. Replacement fill spout seals are available. 9L reservoir.   16.5" L x 16" W  x 21.25" H  Nozzle diameter: 12 mm (0.472441 inch)  

Read more less

Expertly crafted stainless steel fruit press made by the original manufacturer of the bladder press Features a slotted screen which mirrors commercial press designs Higher juice yield (65-70%) compared to other press models Can be used with any domestic water supply that provides at least 36 psi of pressure Easy to clean after use—simply spray down with a hose and towel dry Made in Germany by Speidel Speidel was the original manufacturer of the bladder press. While similar to the Italian models in operation, Speidel offers a few quality upgrades. To obtain a better press Speidel uses a slotted screen, similar to what is offered on large commercial presses, instead of a screen with circular perforations. Speidel presses also offer superior hardware and a recessed valve assembly (to reduce accidental breakage). Compared to other presses, the Speidel hydro press has a higher juice yield (~65-70%) and works completely without electricity and with minimal effort. This press can be used with any domestic water supply the provides at least 2.5 bar (36 psi) of pressure. Pressing pressure and pressing time is simply regulated by the water flow. These units are extremely easy to care for and can be cleaned quickly by simply spraying it down with a hose after use. You will find the quality you'd expect from a product that is 100% German-made. Speidel has been shifting their bladder presses from painted to all stainless, and we're pretty excited about it. Although the orange painted versions have their own aesthetic appeal, nothing beats the performance and practicality of stainless steel. Stainless is much easier to clean and much more resistant to rust. The painted versions are likely to chip over time through normal wear and tear, creating small crevasses for bacteria to call home. No such worries when working this beautiful, brushed stainless press. Overall height is 33" and outlet height is 12".  A press cycle for this unit averages around 35 minutes. Includes: Complete press assembly Inner mesh bag (to keep fruit from getting in the stainless basket and make cleanup easier) Plastic "spray-protection bag" to keep juice from squirting out Fittings to connect garden hose Instruction manual Presses ship in a corrugated box. Minor assembly (attaching legs) is required before use 1 Year Warranty on all parts!   Click here for a PDF of the MoreWine Bladder Press Manual. FAQ: Can the press be operated with air pressure? No. These are hydraulic presses that may only be operated with water. When operating with compressed air, there is a risk of explosion and a very high risk of injury if the membrane bursts due to excess pressure or damage. Is a minimum water pressure required? In order to ensure the function and the best possible yield, there should be a minimum water pressure of 2-2.5 bar on the press. What if the water supply delivers more than 3 bar? In principle, this is not a problem, as if the water pressure inside the press exceeds 3 bar, the pressure relief valve opens and there is no pressure-related damage. How many apples make how much juice? On average, 50kg (110 lbs) of apples produce around 30-35L (8-9 gal) of juice, depending on the variety and quality of the apples.  

Read more less