BrewBuilt® Kettles and Burners

Welded 1.5" tri-clamp ports for a lifetime of leak-free use 304 stainless steel construction with mirror polish finish Notched lid provides cover while not interfering with immersion chillers, hop bags, or other accessories Choose from Boil Kettle, Hot Liquor Tank or Mash Tun configurations The Boil Kettle comes without fittings The Hot Liquor Tank includes a Kettle Maximizer and Thermometer with 2" Probe The Mash Tun includes a False Bottom Kit and Thermometer with 6" Probe Add your preferred Valve Hardware Pack when choosing your kettle above or purchase your own valve & fittings separately Designed for Brewing. Built to Last. BrewBuilt brew kettles are made from 304 stainless steel and offer an unparalleled mix of features for the price. At the very top of the list are two welded-in place tri-clamp couplers that offer a lifetime of leak free use.  As you can imagine, welding in a coupler costs more than punching a hole and using a gasketed (i.e. weld-less) fitting. Welded fittings offer a permanent connection that to us is worth every penny.  The second unique feature that we absolutely love about these brew kettles is the notched lid with silicone plug.  This notch allows you so much flexibility; you can use an immersion chiller, one of our Ultimate Sparge Arms for mashing, tie off hop bags, take a temp reading during cooling, or whatever else we all can dream up. Our new T.C. kettles were designed to keep pace with the ever-evolving world of brewing technology. Tri-clamp fittings are standard fare in professional breweries, and they’ve been widely adopted in homebrewing as T.C. fermenters and pumps become more affordable and widely available. Tri-clamp fittings, also known as Tri-clover, allow you to make a sanitary connection that is free of nooks and crannies for contaminants to take hold. They are much easier to break down for cleaning compared to threaded connections, and they don’t require Teflon tape to make a watertight seal. T.C. fittings and accessories also give you the distinct advantage of being able to clean in place (CIP), so you don’t need to break down your entire system after every brew day. Configurations The base boil kettle comes without fittings so you can modify it the specific tri-clamp accessories that best suit your needs. Add one of the optional Brewing Kettle Valve Packs above which include your choice of valve and all the hardware you'll need to connect 1/2" ID transfer tubing, as well as an end cap to seal the top port if a thermometer or other accessory is not in place. The Hot Liquor Tank includes the base kettle plus a kettle maximizer for the bottom port and thermometer with 2" probe for the top port. Clamps and gaskets are included to attach the tri-clamp kettle maximizer and the thermometer. The Mash Tun includes the base kettle plus a false bottom kit for the bottom port and thermometer with 6" probe for the top port. Clamps and gaskets are included to attach the tri-clamp false bottom maximizer and the thermometer. Kettles do not come with a valve or additional fittings for the bottom port as standard. Add one of our pre-configured Valve Packs or purchase your preferred valve and fittings separately. This Brew Kettle has a lot to offer... Some other features we dig include the internal volume markers from the bottom to the top - so handy for instant reads.  The silicone sleeved handles on the kettle and the lid are a cool feature to protect your hands. The tri-clad bottom with a 4mm core of aluminum sandwiched between two layers of stainless steel offers even heat distribution during the boil and also makes it a perfect choice for anyone wanting to use an induction burner.   Beefy 304 Stainless These kettles are made from 304 grade stainless.  That means you will have less corrosion issues than with a kettle made from lower grade 201 type stainless. We put these kettles through a corrosive salt water test in the MoreBeer! shop and they passed with flying colors. We also made sure the rivets and riveted handles were also made of stainless steel for a long term, trouble free life.  The 10 and 15 gallon size are made from 1.0mm thick stainless steel. The 20, 30 and 50 gallon size are made with 1.2mm stainless - that's pretty thick stuff - and you will know it when you pick one up.  Mirror Polish Finish The mirror polish finish isn’t just for making your Instagram feed pop! This extra slick finish is much easier to clean and sanitize than a standard brushed stainless kettle. Hop trub and other organic solids left behind after a brew day will have a hard time clinging to the interior surface and scrub away with ease. Size Ratios and Stuff All the BrewBuilt kettles follow the recent trend to a 1.2:1 ratio where the height is 1.2 times the diameter. This is a proven commercial ratio that has been adopted in homebrewing to achieve a more consistent 10% evaporation rate during the boil.  We do like this ratio for boiling. For Mashing we would prefer a little bit shallower but that is a small compromise. Dimensions for a hot-liquor tank, if you are thinking brewing system down the road, are irrelevant as any ratio kettle will do. Features: Two welded T.C. couplers for a lifetime of leak free use Notched lid with silicone plug for flexibility 304 stainless steel construction for longevity 1.0mm (10 & 15 gal) or 1.2mm (20, 30 & 50 gal) thick side walls resist denting 4mm Tri-Clad Aluminum bottom sandwiched between two layers of stainless steel for no scorching Internally etched volume markers from top to bottom for easy reading 1.2:1 Ratio is optimal for boiling evaporation rate Lid is designed to conveniently hang from a handle Side handles with silicone coated handles for heat protection Stainless handles with stainless rivets for secure lifting   Size Kettle ID (in.) Height (in.) 10 Gallon 13.78 16.54 15 Gallon 15.75 18.90 20 Gallon 17.72 21.26 30 Gallon 19.69 23.62 50 Gallon 23.62 28.30    

Read more less

Replacement Gaskets for your BrewBuilt Mash Tun.  These are custom pieces we've designed for the BrewBuilt Mash tuns.  Their only purpose?  Assist you in brewing the best beer possible. Solid single piece silicone molded construction will last you for a number of brews, but whether you lose yours, or manage to break it, we have replacements. For a complete False Bottom Kit that includes the necessary Screen and Pickup Tube, see our BrewBuilt Mash Tun False Bottom Kits.  Or for a complete Mash Tun, see our BrewBuilt Mash Tuns. Lowest Price Guarantee, this item has MAP pricing so you can be confident you won't find it for less.

Read more less

Having your pump securely mounted where you want it gives you a more stable unit that is easier to control.   With this stainless mounting bracket you can mount your pump right where you want it in your brewing setup. It has two pre-drilled holes so you can attach it to a brewing stand, cart, etc. After you have secured the mounting bracket you can easily slide your pump into place and remove it when you're finished, if desired. Keep your brew system tidier during brewing by giving your pump a dedicated mount to keep it out of the way.   Fits our Chugger Pumps (H331 and H332).  

Read more less

Welded 1.5" tri-clamp ports for a lifetime of leak-free use 304 stainless steel construction with mirror polish finish Front and back located handles with silicone grips Induction burner compatible Notched lid provides cover while not interfering with immersion chillers, hop bags, or other accessories The BrewBuilt Pro Brewing Kettle is built for even more versatility than the standard T.C. kettle. A third tri-clamp port is offset from the front and ready to accept an electric heating element, whirlpool return valve, or any other accessory that you want to incorporate with the kettle. Handles are located at the front and back, rather than either side, saving you space when building out a horizontal system and will keep fittings pointed away from you regardless of which side you pick up the kettle from. Designed for Brewing. Built to Last. BrewBuilt brew kettles are made from 304 stainless steel and offer an unparalleled mix of features for the price. At the very top of the list are three welded-in place tri-clamp couplers that offer a lifetime of leak free use.  As you can imagine, welding in a coupler costs more than punching a hole and using a gasketed (i.e. weld-less) fitting. Welded fittings offer a permanent connection that to us is worth every penny.  The second unique feature that we absolutely love about these brew kettles is the notched lid with silicone plug.  This notch allows you so much flexibility; you can use an immersion chiller, one of our Ultimate Sparge Arms for mashing, tie off hop bags, take a temp reading during cooling, or whatever else we all can dream up.   Our T.C. kettles were designed to keep pace with the ever-evolving world of brewing technology. Tri-clamp fittings are standard fare in professional breweries, and they’ve been widely adopted in homebrewing as T.C. fermenters and pumps become more affordable and widely available. Tri-clamp fittings, also known as Tri-clover, allow you to make a sanitary connection that is free of nooks and crannies for contaminants to take hold. They are much easier to break down for cleaning compared to threaded connections, and they don’t require Teflon tape to make a watertight seal. T.C. fittings and accessories also give you the distinct advantage of being able to clean in place (CIP), so you don’t need to break down your entire system after every brew day.   This kettle comes without fittings so you can modify it with whatever tri-clamp accessories best suit your needs.   This Brew Kettle has a lot to offer... Some other features we dig include the internal volume markers from the bottom to the top - so handy for instant reads.  The silicone sleeved handles on the kettle and the lid are a cool feature to protect your hands. The tri-clad bottom with a 4mm core of aluminum sandwiched between two layers of stainless steel offers even heat distribution during the boil and also makes it a perfect choice for anyone wanting to use an induction burner.  The bottom coupler is also cool with 1/2" male threads on the outside and 1/2'' female threads on the inside.     Beefy 304 Stainless These kettles are made from 304 grade stainless.  That means you will have less corrosion issues than with a kettle made from lower grade 201 type stainless. We put these kettles through a corrosive salt water test in the MoreBeer! shop and they passed with flying colors. We also made sure the rivets and riveted handles were also made of stainless steel for a long term, trouble free life.  The 10 and 15 gallon size are made from 1.0mm thick stainless steel. The 20, 30 and 50 gallon size are made with 1.2mm stainless - that's pretty thick stuff - and you will know it when you pick one up. The included ball valve is a two piece design that allows for easy cleaning (we prefer these over 3 piece for ease of assembly) and is also made from 304 stainless.    Mirror Polish Finish The mirror polish finish isn’t just for making your Instagram feed pop! This extra slick finish is much easier to clean and sanitize than a standard brushed stainless kettle. Hop trub and other organic solids left behind after a brew day will have a hard time clinging to the interior surface and scrub away with ease.   Size Ratios and Stuff All the BrewBuilt kettles follow the recent trend to a 1.2:1 ratio where the height is 1.2 times the diameter. This is a proven commercial ratio that has been adopted in homebrewing to achieve a more consistent 10% evaporation rate during the boil.  We do like this ratio for boiling. For Mashing we would prefer a little bit shallower but that is a small compromise. Dimensions for a hot-liquor tank, if you are thinking brewing system down the road, are irrelevant as any ratio kettle will do.     Final Words With welded tri-clamp fittings, mirror polish finish, a bunch of cool features, and a solid, thick 304 stainless steel core this kettle is a pretty amazing value. Remember, if you order from MoreBeer! we ship free anywhere in the continental USA!   Features: Three welded T.C. couplers for a lifetime of leak free use Notched lid with silicone plug for flexibility 304 Stainless construction for longevity 1.0mm (10 & 15 gal) or 1.2mm (20, 30 & 50 gal) thick side walls resist denting 4mm Tri-Clad Aluminum bottom sandwiched between two layers of stainless steel for no scorching Internally etched volume markers from top to bottom for easy reading Silicone coated handles for heat protection 1.2:1 Ratio is optimal for boiling evaporation rate Lid is designed to conveniently hang from a handle  Stainless handles with stainless rivets for secure lifting     SKU Size Kettle ID (in.) Height (in.) BE581 10 13.78 16.54 BE582 15 15.75 18.90 BE583 20 17.72 21.26 BE584 30 19.69 23.62 BE585 50 23.62 28.30   Lowest Price Guarantee, this item has MAP pricing so you can be confident you won't find it for less.

Read more less

Convert the BrewBuilt T.C. brewing kettle into a mash tun using one of these false bottom kits. The heavy duty false bottom rests low in the kettle, utilizing a tri-clamp style maximizer that reduces dead space and pulls from the very bottom of your kettle, leaving no wort behind. A Silicone gasket rims the False Bottom, ensuring a tight seal to the wall with no chance of grain bypass. A handle is welded to the top of the false bottom for easy removal. To monitor your mash temperature, we recommend the 1.5" T.C. Thermometer with 6" probe for better grain bed penetration. 1.5" tri-clamp and gasket included Welded T.C. maximizer False bottom gasket for tight seal Welded legs and handle Made from 304 stainless steel NOTE: These false bottom kits will fit all BrewBuilt T.C. kettles, including the electric kettle with SlingBlade heating element. We do not recommend converting the electric kettle into a mash tun as the element will scorch the grain. If you wish to use the false bottom in your boil kettle, it should be noted that the screen is designed to filter grain, so fine particle vegetal matter will pass through.

Read more less

Welded 1.5" tri-clamp ports for a lifetime of leak-free use 304 stainless steel construction with mirror polish finish SlingBlade electric heating element with Tri-Clamp connections Front and back located handles with silicone grips Notched lid provides cover while not interfering with immersion chillers, hop bags, or other accessories The BrewBuilt Electric Kettle The BrewBuilt Electric Brewing Kettle features an offset welded tri-clamp ferrule for easy installation of the SlingBlade electric heating element. The SlingBlade elements were designed specifically for the BrewBuilt kettles and each element fits the corresponding kettle like a glove, perfectly matching the curvature of the kettle wall and providing the appropriate amount of power for the volume size. The unique crescent-shaped design places the element on one side of the kettle, leaving the opposite side clear for an immersion chiller or other accessories. Positioning the element in this way also promotes a rolling boil that evenly ditributes heat throughout the kettle. You'll love the results you get with the SlingBlade's ultra-low watt density, which won't scorch your wort. The kettle does not come with a power cord so you'll need to provide your own extension cord, or add our watertight On/Off power switch for the most convenient way to power the element. Handles are located at the front and back, rather than either side, saving you space when building out a horizontal system and will keep fittings pointed away from you regardless of which side you pick up the kettle from. This model includes a T.C. x FPT ball valve with oversized 5/8" barb—ideal for using 1/2" ID silicone transfer tubing. Also available with Butterfly Valve or T.C. x T.C. Ball Valve hardware packs. Designed for Brewing. Built to Last. BrewBuilt brew kettles are made from 304 stainless steel and offer an unparalleled mix of features for the price. At the very top of the list are two welded-in place tri-clamp couplers that offer a lifetime of leak free use.  As you can imagine, welding in a coupler costs more than punching a hole and using a gasketed (i.e. weld-less) fitting. Welded fittings offer a permanent connection that to us is worth every penny.  The second unique feature that we absolutely love about these brew kettles is the notched lid with silicone plug.  This notch allows you so much flexibility; you can use an immersion chiller, one of our Ultimate Sparge Arms for mashing, tie off hop bags, take a temp reading during cooling, or whatever else we all can dream up. Our T.C. kettles were designed to keep pace with the ever-evolving world of brewing technology. Tri-clamp fittings are standard fare in professional breweries, and they’ve been widely adopted in homebrewing as T.C. fermenters and pumps become more affordable and widely available. Tri-clamp fittings, also known as Tri-clover, allow you to make a sanitary connection that is free of nooks and crannies for contaminants to take hold. They are much easier to break down for cleaning compared to threaded connections, and they don’t require Teflon tape to make a watertight seal. T.C. fittings and accessories also give you the distinct advantage of being able to clean in place (CIP), so you don’t need to break down your entire system after every brew day. This Brew Kettle has a lot to offer... Some other features we dig include the internal volume markers from the bottom to the top - so handy for instant reads.  The silicone sleeved handles on the kettle and the lid are a cool feature to protect your hands. The tri-clad bottom with a 4mm core of aluminum sandwiched between two layers of stainless steel offers even heat distribution during the boil and also makes it a perfect choice for anyone wanting to use an induction burner.  The bottom coupler is also cool with 1/2" male threads on the outside and 1/2'' female threads on the inside.   Beefy 304 Stainless These kettles are made from 304 grade stainless.  That means you will have less corrosion issues than with a kettle made from lower grade 201 type stainless. We put these kettles through a corrosive salt water test in the MoreBeer! shop and they passed with flying colors. We also made sure the rivets and riveted handles were also made of stainless steel for a long term, trouble free life.  The 10 and 15 gallon size are made from 1.0mm thick stainless steel. The 20, 30 and 50 gallon size are made with 1.2mm stainless - that's pretty thick stuff - and you will know it when you pick one up. The included ball valve is a two piece design that allows for easy cleaning (we prefer these over 3 piece for ease of assembly) and is also made from 304 stainless.  Mirror Polish Finish The mirror polish finish isn’t just for making your Instagram feed pop! This extra slick finish is much easier to clean and sanitize than a standard brushed stainless kettle. Hop trub and other organic solids left behind after a brew day will have a hard time clinging to the interior surface and scrub away with ease. Size Ratios and Stuff All the BrewBuilt kettles follow the recent trend to a 1.2:1 ratio where the height is 1.2 times the diameter. This is a proven commercial ratio that has been adopted in homebrewing to achieve a more consistent 10% evaporation rate during the boil.  We do like this ratio for boiling. For Mashing we would prefer a little bit shallower but that is a small compromise. Dimensions for a hot-liquor tank, if you are thinking brewing system down the road, are irrelevant as any ratio kettle will do.   Final Words With welded tri-clamp fittings, mirror polish finish, a bunch of cool features, and a solid, thick 304 stainless steel core this kettle is a pretty amazing value. Remember, if you order from MoreBeer! we ship free anywhere in the continental USA! SlingBlade Heating Elements The BrewBuilt SlingBlade's unique crescent-shaped design promotes a rolling boil and even heat distribution. This electric heating element places all of the heating power on one side of the kettle, sending thermal energy upward to the surface that then cascades downward on the opposite side of the kettle. This movement creates a natural turbulence that evenly distributes heat while creating a vigorous boil. By being located on one side of the kettle, the other side is clear for immersion chillers, and the curved shape won't obstruct the flow of wort during whirlpool. Thanks to the non-circular design, the SlingBlade can easily be installed on any kettle with a 1.5" tri-clamp ferrule. This also makes removing the element for cleaning between uses a breeze. Kettle Key Features: Three welded T.C. couplers for a lifetime of leak free use 50-gal kettle has four welded T.C. couplers to use with two heating elements T.C. x FPT ball valve with 5/8" barb AISI304 Stainless Steel construction for longevity and excellent corrosion resistance Stainless handles and rivets for secure lifting Silicone coated kettle and lid handles for heat protection Lid is designed to conveniently hang from a handle 4 mm Tri-Clad Bottom with Aluminum Core heats quickly and disperses heat evenly to prevent scorching Induction burner compatible 1.0mm (10 & 15 gal) or 1.2mm (20, 30 & 50 gal) thick side walls resist denting 1.2:1 height to diameter ratio provides optimal evaporation rate during boiling Industry-First notched lid with silicone plug accommodates an immersion chiller or sparge arm Internally etched volume markers from top to bottom for easy filling SlingBlade Key Features: Made from Stainless Steel with proprietary coating for long life 1.5" Tri-Clamp connection Unique offset design promotes rolling boil Ultra-Low Watt Density eliminates scorching UL Certified components 240 Volt L6-30 plug 20 Amp breaker required for 10 & 15-gallon kettle 30 Amp breaker required for 20 & 30-gallon kettle 50-gallon kettle uses 2 x heating elements and requires 2 x 30 amp circuits SKU Size Element Wattage Kettle ID (in.) Height (in.) BE581A 10 3750 13.78 16.54 BE582A 15 4500 15.75 18.90 BE583A 20 5000 17.72 21.26 BE584A 30 5750 19.69 23.62 BE585A 50 (2) 5750 23.6 28.30   ***In order to avoid injury or death we strongly recommend using a GFCI in any circuit used near water. You can find one here.***   Lowest Price Guarantee, this item has MAP pricing so you can be confident you won't find it for less.

Read more less

Kettle Maximizer allows you to pull liquor or wort from below the depth of your kettle's bottom port Angle straight down in hot liquor tanks to maximize pick up Rotate to your preferred pick-up height in boil kettles to leave trub behind when transferring to fermenter The tri-clamp maximizer is recommended for boil kettles and hot liquor tanks with 1.5" T.C. bottom ports. This fitting will allow you to pull liquor or wort from below the depth of your kettle's bottom port without the need to tip your vessel. For hot liquor tanks, point the end of the tube straight down to maximize pick up. For boil kettles, you can rotate the maximizer to position the end of the tube at your preferred height above the bottom of the kettle, leaving room for a layer of trub that will be left behind in the kettle when you transfer wort to your fermenter. 1.5" tri-clamp Tube Length: 6.5" Overall Length: 8.18" Made from stainless steel

Read more less

Recirculate wort in your boil kettle without sacrificing one of your tri-clamp ports. The BrewBuilt Whirlpool Return Fitting & Thermowell Offset kit allows you to use any tri-clamp kettle's thermometer port to recirculate wort while also taking temp readings. This kit is perfect for kettles that only have two tri-clamp ports—eliminating the need to drill out a hole in your kettle to add a third port for wort recirculation. Attach your preferred valve or tri-clamp fitting to the side inlet and, during whirlpool, draw wort from your bottom port and pump it back through the Whirlpool Return Fitting. Kit Includes: Whirlpool Return Fitting Thermowell Offset (1) 1.5" Tri-Clamp (1) 1.5" Tri-Clamp Gasket (EPDM)

Read more less

Welded 1.5" tri-clamp ports for a lifetime of leak-free use Front & back positioned handles reduce the space needed to arrange multiple kettles in a horizontal system 304 stainless steel construction with mirror polish finish Notched lid provides cover while not interfering with immersion chillers, hop bags, or other accessories Choose from Boil Kettle, Hot Liquor Tank or Mash Tun configurations The Boil Kettle comes without fittings The Hot Liquor Tank includes a Kettle Maximizer and Thermometer with 2" Probe The Mash Tun includes a False Bottom Kit and Thermometer with 6" Probe Add your preferred Valve Hardware Pack when choosing your kettle above or purchase your own valve & fittings separately Designed for Brewing. Built to Last. BrewBuilt brew kettles are made from 304 stainless steel and offer an unparalleled mix of features for the price. At the very top of the list are two welded-in place tri-clamp couplers that offer a lifetime of leak free use.  As you can imagine, welding in a coupler costs more than punching a hole and using a gasketed (i.e. weld-less) fitting. Welded fittings offer a permanent connection that to us is worth every penny.  The second unique feature that we absolutely love about these brew kettles is the notched lid with silicone plug.  This notch allows you so much flexibility; you can use an immersion chiller, one of our Ultimate Sparge Arms for mashing, tie off hop bags, take a temp reading during cooling, or whatever else we all can dream up. Our new T.C. kettles were designed to keep pace with the ever-evolving world of brewing technology. Tri-clamp fittings are standard fare in professional breweries, and they’ve been widely adopted in homebrewing as T.C. fermenters and pumps become more affordable and widely available. Tri-clamp fittings, also known as Tri-clover, allow you to make a sanitary connection that is free of nooks and crannies for contaminants to take hold. They are much easier to break down for cleaning compared to threaded connections, and they don’t require Teflon tape to make a watertight seal. T.C. fittings and accessories also give you the distinct advantage of being able to clean in place (CIP), so you don’t need to break down your entire system after every brew day. Configurations The base boil kettle comes without fittings so you can modify it the specific tri-clamp accessories that best suit your needs. Add one of the optional Brewing Kettle Valve Packs above which include your choice of valve and all the hardware you'll need to connect 1/2" ID transfer tubing, as well as an end cap to seal the top port if a thermometer or other accessory is not in place. The Hot Liquor Tank includes the base kettle plus a kettle maximizer for the bottom port and thermometer with 2" probe for the top port. Clamps and gaskets are included to attach the tri-clamp kettle maximizer and the thermometer. The Mash Tun includes the base kettle plus a false bottom kit for the bottom port and thermometer with 6" probe for the top port. Clamps and gaskets are included to attach the tri-clamp false bottom maximizer and the thermometer. Kettles do not come with a valve or additional fittings for the bottom port as standard. Add one of our pre-configured Valve Packs or purchase your preferred valve and fittings separately. This Brew Kettle has a lot to offer... Some other features we dig include the internal volume markers from the bottom to the top - so handy for instant reads.  The silicone sleeved handles on the kettle and the lid are a cool feature to protect your hands. The tri-clad bottom with a 4mm core of aluminum sandwiched between two layers of stainless steel offers even heat distribution during the boil and also makes it a perfect choice for anyone wanting to use an induction burner.   Beefy 304 Stainless These kettles are made from 304 grade stainless.  That means you will have less corrosion issues than with a kettle made from lower grade 201 type stainless. We put these kettles through a corrosive salt water test in the MoreBeer! shop and they passed with flying colors. We also made sure the rivets and riveted handles were also made of stainless steel for a long term, trouble free life.  The 10 and 15 gallon size are made from 1.0mm thick stainless steel. The 20, 30 and 50 gallon size are made with 1.2mm stainless - that's pretty thick stuff - and you will know it when you pick one up.  Mirror Polish Finish The mirror polish finish isn’t just for making your Instagram feed pop! This extra slick finish is much easier to clean and sanitize than a standard brushed stainless kettle. Hop trub and other organic solids left behind after a brew day will have a hard time clinging to the interior surface and scrub away with ease. Size Ratios and Stuff All the BrewBuilt kettles follow the recent trend to a 1.2:1 ratio where the height is 1.2 times the diameter. This is a proven commercial ratio that has been adopted in homebrewing to achieve a more consistent 10% evaporation rate during the boil.  We do like this ratio for boiling. For Mashing we would prefer a little bit shallower but that is a small compromise. Dimensions for a hot-liquor tank, if you are thinking brewing system down the road, are irrelevant as any ratio kettle will do. Features: Two welded T.C. couplers for a lifetime of leak free use Front & back oriented handles with silicone coated handles for heat protection Notched lid with silicone plug for flexibility 304 stainless steel construction for longevity 1.0mm (10 & 15 gal) or 1.2mm (20, 30 & 50 gal) thick side walls resist denting 4mm Tri-Clad Aluminum bottom sandwiched between two layers of stainless steel for no scorching Internally etched volume markers from top to bottom for easy reading 1.2:1 Ratio is optimal for boiling evaporation rate Lid is designed to conveniently hang from a handle  Stainless handles with stainless rivets for secure lifting   Size Kettle ID (in.) Height (in.) 10 Gallon 13.78 16.54 15 Gallon 15.75 18.90 20 Gallon 17.72 21.26 30 Gallon 19.69 23.62 50 Gallon 23.62 28.30    

Read more less

Welded 1.5" tri-clamp ports for a lifetime of leak-free use 304 stainless steel construction with mirror polish finish SlingBlade electric heating element with Tri-Clamp connections Front and back located handles with silicone grips Notched lid provides cover while not interfering with immersion chillers, hop bags, or other accessories The BrewBuilt Electric Kettle The BrewBuilt Electric Brewing Kettle features an offset welded tri-clamp ferrule for easy installation of the SlingBlade electric heating element. The SlingBlade elements were designed specifically for the BrewBuilt kettles and each element fits the corresponding kettle like a glove, perfectly matching the curvature of the kettle wall and providing the appropriate amount of power for the volume size. The unique crescent-shaped design places the element on one side of the kettle, leaving the opposite side clear for an immersion chiller or other accessories. Positioning the element in this way also promotes a rolling boil that evenly ditributes heat throughout the kettle. You'll love the results you get with the SlingBlade's ultra-low watt density, which won't scorch your wort. The kettle does not come with a power cord so you'll need to provide your own extension cord, or add our watertight On/Off power switch for the most convenient way to power the element. Handles are located at the front and back, rather than either side, saving you space when building out a horizontal system and will keep fittings pointed away from you regardless of which side you pick up the kettle from. This model includes a Butterfly Valve with 1/2" barb. Also available with T.C. x FPT or T.C. x T.C. Ball Valve hardware packs. Designed for Brewing. Built to Last. BrewBuilt brew kettles are made from 304 stainless steel and offer an unparalleled mix of features for the price. At the very top of the list are two welded-in place tri-clamp couplers that offer a lifetime of leak free use.  As you can imagine, welding in a coupler costs more than punching a hole and using a gasketed (i.e. weld-less) fitting. Welded fittings offer a permanent connection that to us is worth every penny.  The second unique feature that we absolutely love about these brew kettles is the notched lid with silicone plug.  This notch allows you so much flexibility; you can use an immersion chiller, one of our Ultimate Sparge Arms for mashing, tie off hop bags, take a temp reading during cooling, or whatever else we all can dream up. Our T.C. kettles were designed to keep pace with the ever-evolving world of brewing technology. Tri-clamp fittings are standard fare in professional breweries, and they’ve been widely adopted in homebrewing as T.C. fermenters and pumps become more affordable and widely available. Tri-clamp fittings, also known as Tri-clover, allow you to make a sanitary connection that is free of nooks and crannies for contaminants to take hold. They are much easier to break down for cleaning compared to threaded connections, and they don’t require Teflon tape to make a watertight seal. T.C. fittings and accessories also give you the distinct advantage of being able to clean in place (CIP), so you don’t need to break down your entire system after every brew day. This Brew Kettle has a lot to offer... Some other features we dig include the internal volume markers from the bottom to the top - so handy for instant reads.  The silicone sleeved handles on the kettle and the lid are a cool feature to protect your hands. The tri-clad bottom with a 4mm core of aluminum sandwiched between two layers of stainless steel offers even heat distribution during the boil and also makes it a perfect choice for anyone wanting to use an induction burner.  The bottom coupler is also cool with 1/2" male threads on the outside and 1/2'' female threads on the inside.   Beefy 304 Stainless These kettles are made from 304 grade stainless.  That means you will have less corrosion issues than with a kettle made from lower grade 201 type stainless. We put these kettles through a corrosive salt water test in the MoreBeer! shop and they passed with flying colors. We also made sure the rivets and riveted handles were also made of stainless steel for a long term, trouble free life.  The 10 and 15 gallon size are made from 1.0mm thick stainless steel. The 20, 30 and 50 gallon size are made with 1.2mm stainless - that's pretty thick stuff - and you will know it when you pick one up. The included ball valve is a two piece design that allows for easy cleaning (we prefer these over 3 piece for ease of assembly) and is also made from 304 stainless.  Mirror Polish Finish The mirror polish finish isn’t just for making your Instagram feed pop! This extra slick finish is much easier to clean and sanitize than a standard brushed stainless kettle. Hop trub and other organic solids left behind after a brew day will have a hard time clinging to the interior surface and scrub away with ease. Size Ratios and Stuff All the BrewBuilt kettles follow the recent trend to a 1.2:1 ratio where the height is 1.2 times the diameter. This is a proven commercial ratio that has been adopted in homebrewing to achieve a more consistent 10% evaporation rate during the boil.  We do like this ratio for boiling. For Mashing we would prefer a little bit shallower but that is a small compromise. Dimensions for a hot-liquor tank, if you are thinking brewing system down the road, are irrelevant as any ratio kettle will do.   Final Words With welded tri-clamp fittings, mirror polish finish, a bunch of cool features, and a solid, thick 304 stainless steel core this kettle is a pretty amazing value. Remember, if you order from MoreBeer! we ship free anywhere in the continental USA! SlingBlade Heating Elements The BrewBuilt SlingBlade's unique crescent-shaped design promotes a rolling boil and even heat distribution. This electric heating element places all of the heating power on one side of the kettle, sending thermal energy upward to the surface that then cascades downward on the opposite side of the kettle. This movement creates a natural turbulence that evenly distributes heat while creating a vigorous boil. By being located on one side of the kettle, the other side is clear for immersion chillers, and the curved shape won't obstruct the flow of wort during whirlpool. Thanks to the non-circular design, the SlingBlade can easily be installed on any kettle with a 1.5" tri-clamp ferrule. This also makes removing the element for cleaning between uses a breeze. Kettle Key Features: Three welded T.C. couplers for a lifetime of leak free use 50-gal kettle has four welded T.C. couplers to use with two heating elements Butterfly Valve with 1/2" barb AISI304 Stainless Steel construction for longevity and excellent corrosion resistance Stainless handles and rivets for secure lifting Silicone coated kettle and lid handles for heat protection Lid is designed to conveniently hang from a handle 4 mm Tri-Clad Bottom with Aluminum Core heats quickly and disperses heat evenly to prevent scorching Induction burner compatible 1.0mm (10 & 15 gal) or 1.2mm (20, 30 & 50 gal) thick side walls resist denting 1.2:1 height to diameter ratio provides optimal evaporation rate during boiling Industry-First notched lid with silicone plug accommodates an immersion chiller or sparge arm Internally etched volume markers from top to bottom for easy filling SlingBlade Key Features: Made from Stainless Steel with proprietary coating for long life 1.5" Tri-Clamp connection Unique offset design promotes rolling boil Ultra-Low Watt Density eliminates scorching UL Certified components 240 Volt L6-30 plug 20 Amp breaker required for 10 & 15-gallon kettle 30 Amp breaker required for 20 & 30-gallon kettle 50-gallon kettle uses 2 x heating elements and requires 2 x 30 amp circuits SKU Size Element Wattage Kettle ID (in.) Height (in.) BE581B 10 3750 13.78 16.54 BE582B 15 4500 15.75 18.90 BE583B 20 5000 17.72 21.26 BE584B 30 5750 19.69 23.62 BE585B 50 (2) 5750 23.6 28.30   ***In order to avoid injury or death we strongly recommend using a GFCI in any circuit used near water. You can find one here.*** Lowest Price Guarantee, this item has MAP pricing so you can be confident you won't find it for less.

Read more less

Easily connect multiple BrewBuilt AfterBurners together to create your very own brewing stand. Predrilled holes on every BrewBuilt Burner allow for easily assembly. Includes stainless straps for backside connection along wtih a laser cut plate for the front of the stand.  Front plate also includes predrilled holes for mounting a pump bracket. 8 bolt assemblies are included for a rocksolid connection. This beefy mounting plate is made in the US out of thick, 12 gauge 304 Stainless Steel.

Read more less

Add these super-duty casters directly to your BrewBuilt AfterBurner and save your back. Your BrewBuilt Burner comes with pre-drilled holes making installation super easy.  Includes two casters, two stainless steel mounting brackets, and four bolt packages.  When also used with the optional BrewBuilt Handle you will be able to easily wheel your burner into place.  

Read more less

Filter hops, grains, coffee grounds, and other kettle additions Screen sits tight to the edges with the included BrewBuilt silicone screen gasket All stainless welded components with handle for easy install and removal The BrewBuilt Kettle Screen fits perfectly in the BrewBuilt Brewing Kettle and can be used to filter hop additions, convert the kettle into a mash tun, or for making large batches of cold brew coffee. The welded stainless steel flat bar feet sit on the bottom of your kettle and positions the screen approximately 3/8" above the kettle's bottom port. The silicone gasket creates a tight seal around the kettle wall to retain solids above the screen when transferring liquid out of the kettle.

Read more less

Ball Valve hardware pack for the BrewBuilt Brewing Kettle with 2 x tri-clamp ports. Includes ball valve and hardware for connecting tubing at the kettle's bottom port. End cap included to seal the top port if a thermometer or other accessory is not in place. Includes: (1) Stainless 3-Piece Ball Valve - 1.5" T.C. x 1/2" FPT (1) Stainless 1/2" MPT x 5/8" Barb Adapter (2) Stainless 1.5" Tri-Clamp (2) EPDM 1.5" Tri-Clamp Gasket (1) Stainless 1.5" End Cap Teflon Tape

Read more less

Welded 1.5" tri-clamp ports for a lifetime of leak-free use 304 stainless steel construction with mirror polish finish SlingBlade electric heating element with Tri-Clamp connections Front and back located handles with silicone grips Notched lid provides cover while not interfering with immersion chillers, hop bags, or other accessories The BrewBuilt Electric Kettle The BrewBuilt Electric Brewing Kettle features an offset welded tri-clamp ferrule for easy installation of the SlingBlade electric heating element. The SlingBlade elements were designed specifically for the BrewBuilt kettles and each element fits the corresponding kettle like a glove, perfectly matching the curvature of the kettle wall and providing the appropriate amount of power for the volume size. The unique crescent-shaped design places the element on one side of the kettle, leaving the opposite side clear for an immersion chiller or other accessories. Positioning the element in this way also promotes a rolling boil that evenly ditributes heat throughout the kettle. You'll love the results you get with the SlingBlade's ultra-low watt density, which won't scorch your wort. The kettle does not come with a power cord so you'll need to provide your own extension cord, or add our watertight On/Off power switch for the most convenient way to power the element. Handles are located at the front and back, rather than either side, saving you space when building out a horizontal system and will keep fittings pointed away from you regardless of which side you pick up the kettle from. This model includes a T.C. x T.C. ball valve with 1/2" barb. Also available with Butterfly Valve or T.C. x FPT Ball Valve hardware packs. Designed for Brewing. Built to Last. BrewBuilt brew kettles are made from 304 stainless steel and offer an unparalleled mix of features for the price. At the very top of the list are two welded-in place tri-clamp couplers that offer a lifetime of leak free use.  As you can imagine, welding in a coupler costs more than punching a hole and using a gasketed (i.e. weld-less) fitting. Welded fittings offer a permanent connection that to us is worth every penny.  The second unique feature that we absolutely love about these brew kettles is the notched lid with silicone plug.  This notch allows you so much flexibility; you can use an immersion chiller, one of our Ultimate Sparge Arms for mashing, tie off hop bags, take a temp reading during cooling, or whatever else we all can dream up. Our T.C. kettles were designed to keep pace with the ever-evolving world of brewing technology. Tri-clamp fittings are standard fare in professional breweries, and they’ve been widely adopted in homebrewing as T.C. fermenters and pumps become more affordable and widely available. Tri-clamp fittings, also known as Tri-clover, allow you to make a sanitary connection that is free of nooks and crannies for contaminants to take hold. They are much easier to break down for cleaning compared to threaded connections, and they don’t require Teflon tape to make a watertight seal. T.C. fittings and accessories also give you the distinct advantage of being able to clean in place (CIP), so you don’t need to break down your entire system after every brew day. This Brew Kettle has a lot to offer... Some other features we dig include the internal volume markers from the bottom to the top - so handy for instant reads.  The silicone sleeved handles on the kettle and the lid are a cool feature to protect your hands. The tri-clad bottom with a 4mm core of aluminum sandwiched between two layers of stainless steel offers even heat distribution during the boil and also makes it a perfect choice for anyone wanting to use an induction burner.  The bottom coupler is also cool with 1/2" male threads on the outside and 1/2'' female threads on the inside.   Beefy 304 Stainless These kettles are made from 304 grade stainless.  That means you will have less corrosion issues than with a kettle made from lower grade 201 type stainless. We put these kettles through a corrosive salt water test in the MoreBeer! shop and they passed with flying colors. We also made sure the rivets and riveted handles were also made of stainless steel for a long term, trouble free life.  The 10 and 15 gallon size are made from 1.0mm thick stainless steel. The 20, 30 and 50 gallon size are made with 1.2mm stainless - that's pretty thick stuff - and you will know it when you pick one up. The included ball valve is a two piece design that allows for easy cleaning (we prefer these over 3 piece for ease of assembly) and is also made from 304 stainless.  Mirror Polish Finish The mirror polish finish isn’t just for making your Instagram feed pop! This extra slick finish is much easier to clean and sanitize than a standard brushed stainless kettle. Hop trub and other organic solids left behind after a brew day will have a hard time clinging to the interior surface and scrub away with ease. Size Ratios and Stuff All the BrewBuilt kettles follow the recent trend to a 1.2:1 ratio where the height is 1.2 times the diameter. This is a proven commercial ratio that has been adopted in homebrewing to achieve a more consistent 10% evaporation rate during the boil.  We do like this ratio for boiling. For Mashing we would prefer a little bit shallower but that is a small compromise. Dimensions for a hot-liquor tank, if you are thinking brewing system down the road, are irrelevant as any ratio kettle will do.   Final Words With welded tri-clamp fittings, mirror polish finish, a bunch of cool features, and a solid, thick 304 stainless steel core this kettle is a pretty amazing value. Remember, if you order from MoreBeer! we ship free anywhere in the continental USA! SlingBlade Heating Elements The BrewBuilt SlingBlade's unique crescent-shaped design promotes a rolling boil and even heat distribution. This electric heating element places all of the heating power on one side of the kettle, sending thermal energy upward to the surface that then cascades downward on the opposite side of the kettle. This movement creates a natural turbulence that evenly distributes heat while creating a vigorous boil. By being located on one side of the kettle, the other side is clear for immersion chillers, and the curved shape won't obstruct the flow of wort during whirlpool. Thanks to the non-circular design, the SlingBlade can easily be installed on any kettle with a 1.5" tri-clamp ferrule. This also makes removing the element for cleaning between uses a breeze. Kettle Key Features: Three welded T.C. couplers for a lifetime of leak free use 50-gal kettle has four welded T.C. couplers to use with two heating elements T.C. x T.C. ball valve with 1/2" barb AISI304 Stainless Steel construction for longevity and excellent corrosion resistance Stainless handles and rivets for secure lifting Silicone coated kettle and lid handles for heat protection Lid is designed to conveniently hang from a handle 4 mm Tri-Clad Bottom with Aluminum Core heats quickly and disperses heat evenly to prevent scorching Induction burner compatible 1.0mm (10 & 15 gal) or 1.2mm (20, 30 & 50 gal) thick side walls resist denting 1.2:1 height to diameter ratio provides optimal evaporation rate during boiling Industry-First notched lid with silicone plug accommodates an immersion chiller or sparge arm Internally etched volume markers from top to bottom for easy filling SlingBlade Key Features: Made from Stainless Steel with proprietary coating for long life 1.5" Tri-Clamp connection Unique offset design promotes rolling boil Ultra-Low Watt Density eliminates scorching UL Certified components 240 Volt L6-30 plug 20 Amp breaker required for 10 & 15-gallon kettle 30 Amp breaker required for 20 & 30-gallon kettle 50-gallon kettle uses 2 x heating elements and requires 2 x 30 amp circuits SKU Size Element Wattage Kettle ID (in.) Height (in.) BE581C 10 3750 13.78 16.54 BE582C 15 4500 15.75 18.90 BE583C 20 5000 17.72 21.26 BE584C 30 5750 19.69 23.62 BE585C 50 (2) 5750 23.6 28.30   ***In order to avoid injury or death we strongly recommend using a GFCI in any circuit used near water. You can find one here.*** Lowest Price Guarantee, this item has MAP pricing so you can be confident you won't find it for less.

Read more less

Made specifically for whirlpooling, this fitting angles ricrculating wort along the kettle wall for a more efficient whirlpool effect Doubles as a kettle maximizer, allowing you to pull wort from below the depth of your kettle's bottom port Rotate to your preferred pick-up height in the kettle to leave trub behind when transferring to fermenter Compatible with kettles 12" in diameter and larger This unique tri-clamp fitting works perfectly for whirlpooling hops at the end of the boil and doubles as kettle maximizer when transferring out to your fermenter. When recirculating wort through the bottom port, wort will be returned to flow along the kettle wall for a more efficient whirlpool effect, drawing vegetal matter into the center of your kettle. When transferring wort out, the fitting will then pull from the side of the kettle where matter has been cleared, and by angling the end of the tube downwards, you'll be able to pull liquid from below the depth of your kettle's bottom port without the need to tip your vessel. 1.5" tri-clamp Length from T.C. to tube bend: 7" (approx.) Length from tube bend to outlet: 9" (approx.) Made from stainless steel

Read more less

Ball Valve hardware pack for the BrewBuilt Brewing Kettle with 2 x tri-clamp ports. Includes ball valve and hardware for connecting tubing at the kettle's bottom port. End cap included to seal the top port if a thermometer or other accessory is not in place. Includes: (1) Stainless 1.5" Tri-Clamp 3-Piece Ball Valve (1) Stainless 1.5" Tri-Clamp x 1/2" Barb Adapter (3) Stainless 1.5" Tri-Clamp (3) EPDM 1.5" Tri-Clamp Gasket (1) Stainess 1.5" End Cap

Read more less

This SS handle option is a great upgrade to get your AfterBurner moving!  Combine this with the Caster Package and your AfterBurner will be an easily cartable brewery.  This handle is designed specifically for the Modular AfterBurner Packages, and has drilled holes for easy attaching. Comes with Stainless Steel Handle and Bolt connection packages.  Please note that this handle is designed specifically for the BrewBuilt AfterBurner.

Read more less

This unique kettle with four tri-clamp ports was developed for the BrewBuilt electric kettle line as it requires two ports for two electric heating elements. The kettle is offered without fittings so you can rig it up with whatever accessories you see fit. Welded 1.5" tri-clamp ports for a lifetime of leak-free use 304 stainless steel construction with mirror polish finish Front and back located handles with silicone grips Induction burner compatible Notched lid provides cover while not interfering with immersion chillers, hop bags, or other accessories The BrewBuilt Pro Brewing Kettle is built for even more versatility than the standard T.C. kettle. A third and fourth tri-clamp port are offset from the front and ready to accept an electric heating element, whirlpool return valve, or any other accessory that you want to incorporate with the kettle. Handles are located at the front and back, rather than either side, saving you space when building out a horizontal system and will keep fittings pointed away from you regardless of which side you pick up the kettle from. Designed for Brewing. Built to Last. BrewBuilt brew kettles are made from 304 stainless steel and offer an unparalleled mix of features for the price. At the very top of the list are four welded-in place tri-clamp couplers that offer a lifetime of leak free use.  As you can imagine, welding in a coupler costs more than punching a hole and using a gasketed (i.e. weld-less) fitting. Welded fittings offer a permanent connection that to us is worth every penny.  The second unique feature that we absolutely love about these brew kettles is the notched lid with silicone plug.  This notch allows you so much flexibility; you can use an immersion chiller, one of our Ultimate Sparge Arms for mashing, tie off hop bags, take a temp reading during cooling, or whatever else we all can dream up.   Our T.C. kettles were designed to keep pace with the ever-evolving world of brewing technology. Tri-clamp fittings are standard fare in professional breweries, and they’ve been widely adopted in homebrewing as T.C. fermenters and pumps become more affordable and widely available. Tri-clamp fittings, also known as Tri-clover, allow you to make a sanitary connection that is free of nooks and crannies for contaminants to take hold. They are much easier to break down for cleaning compared to threaded connections, and they don’t require Teflon tape to make a watertight seal. T.C. fittings and accessories also give you the distinct advantage of being able to clean in place (CIP), so you don’t need to break down your entire system after every brew day.   This kettle comes without fittings so you can modify it with whatever tri-clamp accessories best suit your needs.   This Brew Kettle has a lot to offer... Some other features we dig include the internal volume markers from the bottom to the top - so handy for instant reads.  The silicone sleeved handles on the kettle and the lid are a cool feature to protect your hands. The tri-clad bottom with a 4mm core of aluminum sandwiched between two layers of stainless steel offers even heat distribution during the boil and also makes it a perfect choice for anyone wanting to use an induction burner.  The bottom coupler is also cool with 1/2" male threads on the outside and 1/2'' female threads on the inside.     Beefy 304 Stainless These kettles are made from 304 grade stainless.  That means you will have less corrosion issues than with a kettle made from lower grade 201 type stainless. We put these kettles through a corrosive salt water test in the MoreBeer! shop and they passed with flying colors. We also made sure the rivets and riveted handles were also made of stainless steel for a long term, trouble free life.  The 10 and 15 gallon size are made from 1.0mm thick stainless steel. The 20, 30 and 50 gallon size are made with 1.2mm stainless - that's pretty thick stuff - and you will know it when you pick one up. The included ball valve is a two piece design that allows for easy cleaning (we prefer these over 3 piece for ease of assembly) and is also made from 304 stainless.    Mirror Polish Finish The mirror polish finish isn’t just for making your Instagram feed pop! This extra slick finish is much easier to clean and sanitize than a standard brushed stainless kettle. Hop trub and other organic solids left behind after a brew day will have a hard time clinging to the interior surface and scrub away with ease.   Size Ratios and Stuff All the BrewBuilt kettles follow the recent trend to a 1.2:1 ratio where the height is 1.2 times the diameter. This is a proven commercial ratio that has been adopted in homebrewing to achieve a more consistent 10% evaporation rate during the boil.  We do like this ratio for boiling. For Mashing we would prefer a little bit shallower but that is a small compromise. Dimensions for a hot-liquor tank, if you are thinking brewing system down the road, are irrelevant as any ratio kettle will do.     Final Words With welded tri-clamp fittings, mirror polish finish, a bunch of cool features, and a solid, thick 304 stainless steel core this kettle is a pretty amazing value. Remember, if you order from MoreBeer! we ship free anywhere in the continental USA!   Features: Four welded T.C. couplers for a lifetime of leak free use Notched lid with silicone plug for flexibility 304 Stainless construction for longevity 1.0mm (10 & 15 gal) or 1.2mm (20, 30 & 50 gal) thick side walls resist denting 4mm Tri-Clad Aluminum bottom sandwiched between two layers of stainless steel for no scorching Internally etched volume markers from top to bottom for easy reading Silicone coated handles for heat protection 1.2:1 Ratio is optimal for boiling evaporation rate Lid is designed to conveniently hang from a handle  Stainless handles with stainless rivets for secure lifting Kettle ID - 23.62" Height - 28.3"    

Read more less

Butterfly Valve hardware pack for the BrewBuilt Brewing Kettle with 2 x tri-clamp ports. Includes butterly valve and hardware for connecting tubing at the kettle's bottom port. End cap included to seal the top port if a thermometer or other accessory is not in place. Includes: (1) Stainless 1.5" Tri-Clamp Butterfly Valve (1) Stainless 1.5" Tri-Clamp x 1/2" Barb Adapter (3) Stainless 1.5" Tri-Clamp (3) EPDM 1.5" Tri-Clamp Gasket (1) Stainless 1.5" End Cap

Read more less

Pro-Grade Construction: Made from high-quality 304 stainless steel with a welded dish bottom for complete drainage and easy cleaning. Integrated Grain Door: For effortless and complete grain removal. Sanitary Connections: Features sanitary welded TC ferrules for leak-free, professional-grade connections. Enhanced Usability: Includes silicone-gripped handles, a TC-ported lid for CIP, and raised legs for convenient access to lower ports and grain door. Each mash tun is meticulously crafted from high-quality 304 stainless steel, promising not just durability but a lifetime of flawless brews. Discover the revolutionary welded dish bottom, engineered for unparalleled complete drainage, ensuring every precious drop of wort is utilized and cleanup becomes a breeze. Our mash tuns feature high-quality sanitary welded TC Ferrules, providing a lifetime of leak-free use and making sanitary connections effortless, a standard in professional breweries now accessible for homebrewing. Designed for Efficiency and Usability: Experience the ultimate in grain management with the integrated grain door, allowing for easy and complete grain removal after mashing. Comfort and safety are prioritized with silicone-gripped handles to protect your hands from heat. The lid comes welded with a TC port, ready for CIP (Clean-in-Place) and other future accessories. For convenient access to lower ports and the grain door, the mash tuns are raised on sturdy legs. BrewBuilt Mash Tuns are the same high-performance vessels used in our Next Generation BrewSculptures, guaranteeing professional-grade results. Available in a wide range of popular homebrew sizes—10, 15, 20, 30, and 50 gallons—they cater to every brewing scale. Additional features include a notched lid with a silicone plug for versatility, internal volume markers for easy readings, and a variety of TC ports for countless custom setups. Major Features for Brewers: Pro-Grade Construction: Made from high-quality 304 stainless steel with a welded dish bottom for complete drainage and easy cleaning. Integrated Grain Door: For effortless and complete grain removal. Sanitary Connections: Features sanitary welded TC ferrules for leak-free, professional-grade connections. Enhanced Usability: Includes silicone-gripped handles, a TC-ported lid for CIP, and raised legs for convenient access to lower ports and grain door. High Quality 304 stainless steel construction Welded Dish Bottom for complete drainage - easy cleaning, no loss High Quality sanitary welded TC Ferrules Handles with Silicone grips to avoid burning hands Lid comes welded with TC port for CIP and other accessories down the road Mash tuns are raised on legs for easy access to lower ports and grain door Same vessels used in our Next Generation BrewSculptures Wide Range of homebrew sizes - 10, 15, 20, 30, 50 gal Includes: BrewBuilt Dish Bottom Mash Tun with Grain Door Chute for Grain Door False Bottom Thermowell Butterfly Valve TC Clamps and Gaskets Lid with TC CIP port Feet  

Read more less

Eliminate Steam and Condensation: The condenser's continuous flow of cool water captures and converts hot steam back into a liquid that can be easily drained, keeping your brewing area dry and free of moisture damage. Simple, Secure Connection: The condenser attaches directly to a 2" TC port on your BrewBuilt Domed Lid, creating a fully contained, steam-free brewing system. Durable, Sanitary Construction: Made entirely of stainless steel with a tri-clamp connection, this high-efficiency unit is built to last and provides a clean, secure way to get a full rolling boil anywhere. Brew indoors without the worry of moisture, mold, and humidity. The BrewBuilt Condenser is your ultimate solution for a steam-free brew day. This high-efficiency unit is designed to attach directly to the 2" TC port on your BrewBuilt Domed Lid, turning your kettle into a fully contained system. Using a continuous flow of cool water, the condenser captures and converts hot steam back into liquid, which can then be drained away. Its durable all-stainless steel construction and tri-clamp connection provide a clean, secure way to eliminate steam and its associated cleanup. Now you can get a full, rolling boil anywhere—without turning your brewery into a sauna.

Read more less

Pro-Grade Construction: Made from high-quality 304 stainless steel with a welded dish bottom for complete drainage and easy cleaning. Enhanced Cooling & Clarity: Includes an innovative jacketing system for efficient cooling and a welded tangential arm for enhanced whirlpooling, ensuring clear wort transfers and maximum hop utilization. SlingBlade Heating Element: Ultra-low watt density element heats efficiently without obstructing other kettle accessories. Sanitary Connections: Features sanitary welded TC ferrules for leak-free, professional-grade connections. Enhanced Usability: Includes silicone-gripped handles, a TC-ported lid for CIP, and raised legs for convenient access. Elevate your homebrewing craft with BrewBuilt Boil Kettles – where professional-grade design meets passionate homebrewers. Each kettle is meticulously crafted from high-quality 304 stainless steel, promising not just durability but a lifetime of flawless brews. Discover the revolutionary welded dish bottom, engineered for unparalleled complete drainage, ensuring every precious drop of wort is utilized and cleanup becomes a breeze. Our Boil Kettles feature an innovative jacketing system for effective cooling, helping you reach desired temperatures more quickly and precisely. They also include a welded tangential arm for optimal whirlpooling, ensuring clear wort transfers and maximum hop utilization. Our kettles feature high-quality sanitary welded TC Ferrules, providing a lifetime of leak-free use and making sanitary connections effortless, a standard in professional breweries now accessible for homebrewing. These kettles are also designed to work hand-in-glove with the included SlingBlade Heating Elements, offering seamless integration for electric brewing setups. Power cord or controller must be purchased separately. Comfort and safety are prioritized with silicone-gripped handles to protect your hands from heat. The lid comes welded with a TC port, ready for CIP (Clean-in-Place) and other future accessories. For convenient access to lower ports, the kettles are raised on sturdy legs. BrewBuilt Kettles are the same high-performance kettles used in our Next Generation BrewSculptures, guaranteeing professional-grade results. Available in a wide range of popular homebrew sizes—10, 15, 20, 30, and 50 gallons—they cater to every brewing scale. Additional features include a notched lid with a silicone plug for versatility, internal volume markers for easy readings, and a variety of TC ports for countless custom setups. Elevate your brewing experience with BrewBuilt Boil Kettles, designed for the serious homebrewer. Major Features for Brewers: High Quality 304 stainless steel construction Welded Dish Bottom for complete drainage - easy cleaning, no loss Integrated Jacketing System for efficient heating Welded Tangential Arm for superior whirlpooling High Quality sanitary welded TC Ferrules SlingBlade Electric Heating Element(s) (240V) Handles with Silicone grips to avoid burning hands Lid comes welded with TC port for CIP and other accessories down the road Kettles are raised on legs for easy access to lower ports Same Kettles used in our Next Generation BrewSculptures Wide Range of homebrew sizes - 10, 15, 20, 30, 50 gal Loaded Boil Kettle Includes: Jacketed Bottom Drain Boil Kettle with Tangential Arm SlingBlade Heating Element(s) Thermowell Butterfly Valves TC Clamps and Gaskets Notched Lid with TC CIP Port Feet SlingBlade Specs: 240 Volt L6-30 plug 20 Amp breaker required for 10 & 15 gal element 30 Amp breaker required for 20 & 30 gal element 50-gallon kettle requires 2 x 30 amp circuits Includes 2 x 5750 Watt elements Wattage: 10 gal - 3750 Watts 15 gal - 4500 Watts 20 gal - 5000 Watts 30 gal - 5750 Watts Please Note: The kettle does not include a power cord for the heating element. You will need to purchase a power cord or your preferred element controller separately. Warning: In order to avoid injury or death we strongly recommend using a GFCI in any circuit used near water. You can find one here.

Read more less

Pro-Grade Construction: Made from high-quality 304 stainless steel with a welded dish bottom for complete drainage and easy cleaning. SlingBlade Heating Element: Ultra-low watt density element heats efficiently without obstructing other kettle accessories. Sanitary Connections: Features sanitary welded TC ferrules for leak-free, professional-grade connections. Enhanced Usability: Includes silicone-gripped handles, a TC-ported lid for CIP, and raised legs for convenient access. Elevate your homebrewing craft with BrewBuilt Brewing Kettles – where professional-grade design meets passionate homebrewers. Each kettle is meticulously crafted from high-quality 304 stainless steel, promising not just durability but a lifetime of flawless brews. Discover the revolutionary welded dish bottom, engineered for unparalleled complete drainage, ensuring every precious drop of wort is utilized and cleanup becomes a breeze. Our kettles feature high-quality sanitary welded TC Ferrules, providing a lifetime of leak-free use and making sanitary connections effortless, a standard in professional breweries now accessible for homebrewing. These kettles are also designed to work hand-in-glove with the included SlingBlade Heating Elements, offering seamless integration for electric brewing setups. Power cord or controller must be purchased separately. Comfort and safety are prioritized with silicone-gripped handles to protect your hands from heat. The lid comes welded with a TC port, ready for CIP (Clean-in-Place) and other future accessories. For convenient access to lower ports, the kettles are raised on sturdy legs. BrewBuilt Kettles are the same high-performance kettles used in our Next Generation BrewSculptures, guaranteeing professional-grade results. Available in a wide range of popular homebrew sizes—10, 15, 20, 30, and 50 gallons—they cater to every brewing scale. Additional features include a notched lid with a silicone plug for versatility, internal volume markers for easy readings, and a variety of TC ports for countless custom setups. Major Features for Brewers: High Quality 304 stainless steel construction Welded Dish Bottom for complete drainage - easy cleaning, no loss High Quality sanitary welded TC Ferrules SlingBlade Electric Heating Element(s) (240V) Handles with Silicone grips to avoid burning hands Lid comes welded with TC port for CIP and other accessories down the road Kettles are raised on legs for easy access to lower ports Same Kettles used in our Next Generation BrewSculptures Wide Range of homebrew sizes - 10, 15, 20, 30, 50 gal Includes: BrewBuilt Dish Bottom Kettle SlingBlade Heating Element(s) Thermowell Butterfly Valve TC Clamps and Gaskets Lid with TC CIP port Feet SlingBlade Specs: 240 Volt L6-30 plug 20 Amp breaker required for 10 & 15 gal element 30 Amp breaker required for 20 & 30 gal element 50-gallon kettle requires 2 x 30 amp circuits Includes 2 x 5750 Watt elements Wattage: 10 gal - 3750 Watts 15 gal - 4500 Watts 20 gal - 5000 Watts 30 gal - 5750 Watts Please Note: The kettle does not include a power cord for the heating element. You will need to purchase a power cord or your preferred element controller separately. Warning: In order to avoid injury or death we strongly recommend using a GFCI in any circuit used near water. You can find one here.

Read more less

Effortless Grain Removal: Simply attach the stainless steel chute to the integrated grain door on your BrewBuilt Dish Bottom Mash Tun for a clean and controlled way to empty spent grains directly into a bucket. Mess-Free Brewing: This essential upgrade eliminates spills and reduces cleanup time, ensuring a quicker and more efficient post-brew day process. Durable and Sanitary Design: Constructed from durable, food-grade stainless steel, the grain chute is built to last and is easy to clean, maintaining a sanitary environment for your brewing process. Tired of messy grain removal? The BrewBuilt Grain Chute is the essential upgrade for your BrewBuilt Dish Bottom Mash Tun. Designed to fit the integrated grain door, this chute provides a clean and controlled way to remove spent grains. Simply attach the stainless steel chute to the grain door and use a rake or paddle to push the grain directly into a bucket or disposal bag. This simple addition eliminates spills on the floor, reduces cleanup time, and makes grain removal quick and efficient. Crafted from durable, food-grade stainless steel, the BrewBuilt Grain Chute is built to last and easy to clean. Get yours and make your next brew day a little less messy.

Read more less

Integrated 2" TC Port: Seamlessly connect a condenser or still top to recover hop oils, distill water, or experiment with spirits, transforming your kettle into a versatile system. Optimal Vapor Collection: The raised dome design facilitates efficient vapor collection and separation, ensuring high-quality distillation and enhanced performance. Secure & Durable Design: Crafted for a precise fit and a secure seal, this domed lid ensures optimal function and lasting durability for all your brewing and distilling needs. Bring your brewing to the next level with the BrewBuilt Domed Lid for Dish Bottom Kettles. This essential upgrade features a centered 2" tri-clamp (TC) port, giving you the flexibility to easily add a condenser or still top. Whether you're looking to recover hop oils, distill water, or experiment with spirits, this domed lid is designed for a seamless fit and optimal performance. The raised dome design allows for proper vapor collection and separation, while the high-quality construction ensures a secure seal. Transform your BrewBuilt kettle into a multi-functional powerhouse and unlock a new world of brewing possibilities.  

Read more less

Pro-Grade Construction: Made from high-quality 304 stainless steel with a welded dish bottom for complete drainage and easy cleaning. Integrated Grain Door: For effortless and complete grain removal. Sanitary Connections: Features sanitary welded TC ferrules for leak-free, professional-grade connections. Enhanced Usability: Includes silicone-gripped handles, a TC-ported lid for CIP, and raised legs for convenient access to lower ports and grain door. Fully Customizable: The kettle arrives without fittings or valves, giving you a blank canvas to customize with your preferred accessories. Elevate your homebrewing craft with the BrewBuilt Dish Bottom Kettle, specifically designed as the perfect mash tun. This professional-grade kettle is meticulously crafted from high-quality 304 stainless steel, ensuring durability and a lifetime of flawless brews. Experience the revolutionary welded dish bottom, engineered for unparalleled complete drainage, ensuring every precious drop of wort is utilized and cleanup becomes a breeze. This specialized BrewBuilt Kettle features a convenient grain door, making the removal of spent grains incredibly easy and efficient. High-quality sanitary welded TC Ferrules provide a lifetime of leak-free use and make sanitary connections effortless, a standard in professional breweries now accessible for homebrewing. Comfort and safety are prioritized with silicone-gripped handles to protect your hands from heat. The lid comes welded with a TC port, ready for CIP (Clean-in-Place) and other future accessories. For convenient access to lower ports, the kettle is raised on sturdy legs. BrewBuilt Kettles are the same high-performance kettles used in our Next Generation BrewSculptures, guaranteeing professional-grade results. Available in a wide range of popular homebrew sizes—10, 15, 20, 30, and 50 gallons—they cater to every brewing scale. Build Your Own Brewing System: This BrewBuilt Kettle provides the perfect foundation for your custom mashing setup. It does not include accessories, giving you the freedom to purchase the specific hardware you need to build a dedicated Mash Tun. Major Features for Brewers: High-Quality 304 stainless steel construction Welded Dish Bottom for complete drainage - easy cleaning, no loss Integrated Grain Door for easy removal of spent grains High-Quality sanitary welded TC Ferrules Handles with Silicone grips to avoid burning hands Lid comes welded with TC port for CIP and other accessories down the road Kettles are raised on legs for easy access to lower ports Same Kettles used in our Next Generation BrewSculptures Wide Range of homebrew sizes - 10, 15, 20, 30, 50 gal Please Note: This kettle is designed for customization. All necessary hardware—including heating elements, valves, thermowells, and clamps—must be purchased separately to build your desired brewing system.  

Read more less

Pro-Grade Construction: Made from high-quality 304 stainless steel with a welded dish bottom for complete drainage and easy cleaning. Sanitary Connections: Features sanitary welded TC ferrules for leak-free, professional-grade connections. Enhanced Usability: Includes silicone-gripped handles, a TC-ported lid for CIP, and raised legs for convenient access. Fully Customizable: The kettle arrives without fittings or valves, giving you a blank canvas to customize with your preferred accessories. Elevate your homebrewing craft with BrewBuilt Brewing Kettles – where professional-grade design meets the passionate homebrewer's desire for customization. Each kettle is meticulously crafted from high-quality 304 stainless steel, promising not just durability but a lifetime of flawless brews. Discover the revolutionary welded dish bottom, engineered for unparalleled complete drainage, ensuring every precious drop of wort is utilized and cleanup becomes a breeze. Our kettles feature high-quality sanitary welded TC Ferrules, providing a lifetime of leak-free use and making sanitary connections effortless, a standard in professional breweries now accessible for homebrewing. Comfort and safety are prioritized with silicone-gripped handles to protect your hands from heat. The lid comes welded with a TC port, ready for CIP (Clean-in-Place) and other future accessories. For convenient access to lower ports, the kettles are raised on sturdy legs. BrewBuilt Kettles are the same high-performance kettles used in our Next Generation BrewSculptures, guaranteeing professional-grade results. Available in a wide range of popular homebrew sizes—10, 15, 20, 30, and 50 gallons—they cater to every brewing scale. Build Your Own Brewing System: This BrewBuilt Kettle provides the perfect foundation for your custom brewing setup. It does not include accessories, giving you the freedom to purchase the specific hardware you need to build a dedicated Hot Liquor Tank (HLT), Mash Tun, or Boil Kettle. Major Features for Brewers: High-Quality 304 stainless steel construction Welded Dish Bottom for complete drainage - easy cleaning, no loss High-Quality sanitary welded TC Ferrules Handles with Silicone grips to avoid burning hands Lid comes welded with TC port for CIP and other accessories down the road Kettles are raised on legs for easy access to lower ports Same Kettles used in our Next Generation BrewSculptures Wide Range of homebrew sizes - 10, 15, 20, 30, 50 gal Please Note: This kettle is designed for customization. All necessary hardware, including heating elements, valves, thermowells, and clamps, must be purchased separately to build your desired brewing system. Please Note: This kettle is designed for customization. All necessary hardware—including heating elements, valves, thermowells, and clamps—must be purchased separately to build your desired brewing system.

Read more less

Pro-Grade Construction: Made from high-quality 304 stainless steel with a welded dish bottom for complete drainage and easy cleaning. Enhanced Cooling & Clarity: Includes an innovative jacketing system for efficient cooling and a welded tangential arm for enhanced whirlpooling, ensuring clear wort transfers and maximum hop utilization. Sanitary Connections: Features sanitary welded TC ferrules for leak-free, professional-grade connections. Enhanced Usability: Includes silicone-gripped handles, a TC-ported lid for CIP, and raised legs for convenient access. Fully Customizable: The kettle arrives without fittings or valves, giving you a blank canvas to customize with your preferred accessories. Elevate your homebrewing craft with the BrewBuilt Dish Bottom Kettle, now enhanced with a tangential whirlpool arm and an integrated cooling jacket. This professional-grade kettle is meticulously crafted from high-quality 304 stainless steel, ensuring durability and a lifetime of flawless brews. Experience the revolutionary welded dish bottom, engineered for unparalleled complete drainage, ensuring every precious drop of wort is utilized and cleanup becomes a breeze. The integrated tangential whirlpool arm allows for efficient hop and trub separation, creating a compact cone at the bottom of your kettle, leading to clearer wort and better fermentation. The built-in cooling jacket provides rapid and controlled chilling of your wort, eliminating the need for external immersion chillers and streamlining your brew day. High-quality sanitary welded TC Ferrules provide a lifetime of leak-free use and make sanitary connections effortless, a standard in professional breweries now accessible for homebrewing. Comfort and safety are prioritized with silicone-gripped handles to protect your hands from heat. The lid comes welded with a TC port, ready for CIP (Clean-in-Place) and other future accessories. For convenient access to lower ports, the kettle is raised on sturdy legs. BrewBuilt Kettles are the same high-performance kettles used in our Next Generation BrewSculptures, guaranteeing professional-grade results. Available in a wide range of popular homebrew sizes—10, 15, 20, 30, and 50 gallons—they cater to every brewing scale. Build Your Own Brewing System: This BrewBuilt Kettle provides the perfect foundation for your custom brewing setup, whether you're building a dedicated Hot Liquor Tank (HLT), Mash Tun, or Boil Kettle. It does not include all accessories, giving you the freedom to purchase the specific hardware you need to complete your ultimate brewing system. Major Features for Brewers: High-Quality 304 stainless steel construction Welded Dish Bottom for complete drainage - easy cleaning, no loss Integrated Tangential Whirlpool Arm for efficient hop and trub separation Built-in Cooling Jacket for rapid and controlled wort chilling High-Quality sanitary welded TC Ferrules Handles with Silicone grips to avoid burning hands Lid comes welded with TC port for CIP and other accessories down the road Kettles are raised on legs for easy access to lower ports Same Kettles used in our Next Generation BrewSculptures Wide Range of homebrew sizes - 10, 15, 20, 30, 50 gal Please Note: This kettle is designed for customization. While it includes the tangential whirlpool arm and cooling jacket, other necessary hardware—including heating elements, valves, thermowells, and clamps—must be purchased separately to build your desired brewing system.

Read more less

Introducing the Next-Generation BrewBuilt BrewSculpture™ Professional-Grade Control: Manage your entire brew day from a single, intuitive digital touchscreen. Easily program mash steps and control pumps and heating elements with a tap, providing a centralized and seamless brewing experience. Full-Draining Kettles: The completely redesigned, true welded dish bottoms ensure you get every last drop of your wort. This revolutionary design eliminates the need for tilting and makes cleanup significantly easier. Innovative Mash Tun with Grain Door: Say goodbye to scooping heavy, spent grain. Our integrated grain door and stainless steel grain chute let you easily empty the mash tun into a disposal bucket, keeping your brew day clean and efficient. Tangential Boil Kettle: The integrated tangential whirlpool arm creates a powerful vortex, compacting hop and trub matter into a tight cone for a clear, sediment-free transfer to your fermenter. An integrated cooling jacket also helps rapidly chill your wort. Experience the pinnacle of home brewing with the new BrewBuilt BrewSculpture™. This all-in-one electric brewing system combines the trusted control and performance of our original designs with the latest innovations in brewing vessel technology, all managed through a unique digital touchscreen controller. The result? A pro-grade, all-electric sculpture engineered for efficiency, precision, and an unbelievably clean brew day, with the entire system controlled from one intuitive interface. This product will be released soon! Use the email signup button above to receive notifications and updates. At the Heart of the System: Full-Draining Kettles and Integrated Work Table We've completely redesigned our kettles to be the most drainable on the market. Featuring a true welded dish bottom, these kettles ensure you get every last drop of your precious wort. The revolutionary design means no more tilting, no more lost volume, and a far easier cleanup. Complementing this, a new integrated work table, sourced overseas, features a recessed top and drain, providing a dedicated and convenient space for all your brewing tasks. Mash Tun with Grain Door: Say goodbye to scooping heavy, water-logged grain. Our innovative mash tun features an integrated grain door, allowing you to simply open the chute and empty spent grains directly into a bucket or disposal bag. The included stainless steel grain chute ensures a clean and mess-free transfer. Boil Kettle with Tangential Arm and Cooling Jacket: Our new boil kettle is built for performance. The integrated tangential whirlpool arm creates a powerful vortex, compacting hop and trub matter into a tight cone at the center of the kettle, leaving you with a clear, sediment-free transfer to your fermenter. Additionally, the integrated cooling jacket allows for rapid chilling, bringing your wort down to pitching temperature faster than ever. Unmatched Power and Control with a Single Interface Powered by our proven control system, the new BrewSculpture puts you in command of your entire brew day through its unique digital touchscreen controller. The intuitive touchscreen interface allows you to program mash steps and control every pump and element with a tap of your finger, providing a seamless and centralized brewing experience. SlingBlade™ Heating Elements: Our unique crescent-shaped SlingBlade™ heating elements are engineered to promote a vigorous, rolling boil without scorching your wort. Their ultra-low watt density design transfers heat efficiently while staying out of the way of your whirlpool arm and other kettle accessories. Built for Life: Like all BrewBuilt products, this BrewSculpture is built to last. The heavy-duty, TIG-welded 304 stainless steel frame is designed for a rock-solid, corrosion-resistant foundation for a lifetime of brewing. The new BrewBuilt BrewSculpture™ is more than just a brewing system—it's a professional-grade, all-electric brewery that fits in your home, controlled effortlessly from a single, advanced digital interface. It’s a testament to over two decades of R&D and a commitment to helping you brew your best beer.  

Read more less