Cleaning & Sanitizing

This is a must have for any home brewer! No rinse, no worries, no contaminations! Only requires 1 minute of contact time for effective sanitization High-foaming to ensure maximum coverage and contact in all the nooks and crannies in larger equipment Don't fear the foam! Residual foam in your fermenter, bottles, or kegs will have no impact on your finished beer Five Star Chemicals is a full-service cleaning provider with a proven record in the craft beverage industries since 1980 Buy in bulk for even more savings! Star San is an acid-based sanitizer that is quick, odorless, tasteless, and safe for most materials except softer metals. As a high foamer, it’s foaming action ensures coverage and contact time in larger vessels and better penetration into nooks and crannies. Any foam that is left over in your carboy or keg will not harm your beer or you. If you plan on making some up for spray application, it is best to use distilled or RO water to maximize the life of the unused portion (minerals in tap water reduce the shelf life of Star San once in solution). If a lower foaming alternative is preferred, for bottling or multiple batches, check out Saniclean. Use 1 oz per 5 gallons of water  Contact time of 1 minute  Completely safe and non-toxic Will not impart any flavors or odors   Please note: Due to DOT HAZMAT shipping restrictions, orders for 15-gallon, 55-gallon, or multiple 5-gallon units will require freight shipping. These sizes are intended for commercial use. HAZMAT items are not able to be returned.

Read more less

A safe alkaline cleaner for everything in your brewing universe! PBW (Powdered Brewery Wash) is a favorite of small home breweries because it out-performs dangerous caustic chemicals without scrubbing. Just put your kettle, bottles, carboy, etc. in for a good long soak and watch dirt, krausen and any other organic material simply rinse or wipe away. Will not corrode soft metals. USE CAUTION when you use PBW in closed equipment. When you mix hot water and PBW in an air or water-tight space, it will create pressure.  

Read more less

BLC, also known as Beer Line Cleaner, is a preferred alkaline based draft line cleaner. Used to remove bacteria and loosen mineral deposits from beverage lines, faucets, etc.. Can be used with all type of cleaning systems and al types of draft set ups including long draw commercial systems, homebrew set ups, kegerators, draft box lines, etc.. Can be used with cold or warm water. No hazardous shipping.   Instructions for use: Add ½ oz BLC for each quart of water.  Drain out beer and run solution into line.  Circulate or let stand in lines for at least 15 minutes  Flush cleaning solution from line and rinse well with clean water. 

Read more less

Homebrewers know that proper sanitation techniques are critical for creating high quality homemade beverages. BTF Iodophor, an iodine based sanitizer, is a powerful, broad spectrum antimicrobial product that kills a wide range of bugs that are waiting to infect your fermentation. Unlike acid based sanitizers, BTF Iodophor reliably kills yeast, mold, fungus, bacteria, viruses and blood borne pathogens.  BTF Iodophor offers a low cost per use, is gentler on your hands than other sanitizers, and is very low foaming. If used in the correct dilution (very important) it is a no-rinse sanitizer. It is safe to use on all your brewing equipment such as buckets, kegs, tanks, fermenters, bottles, etc. Even if you frequently use a sanitizer, it’s a good idea to have multiple sanitizers on hand especially when working with wild yeasts and bacteria or as a “change of pace” sanitizer. Directions for 12.5 PPM Brewing Sanitizer Solution: To Make 1.5 Gallons of sanitizer: Mix 1 tsp BTF Iodophor into 1 ½ gallons cool water To Make 5 Gallons of Sanitizer: Mix ½ oz (1 Tablespoon) BTF Iodophor into 5 gallons cool water Allow solution to contact surface for 2 minutes, then air dry. Iodophor Features: Kills yeast, mold, fungus, gram positive bacteria, gram negative bacteria, spore forming bacteria, viruses and blood borne pathogens Use at a rate of 1/2 oz of BTF per 5 gallons Low foaming No-rinse at 12.5 PPM dilution (see above) Non-corrosive and gentle on skin and hands

Read more less

Our favorite brewer gloves are made from a chemical resistant PVC that protects your hands from harsh cleaning chemicals. With a length of 21.5 in, these elbow length gloves allow you to reach into liquids while protecting your hands and forearms.  We also like these gloves because they offer more heat resistance than the standard green brewing gloves.  Great for cleaning your brewery and handling brewing equipment in a sanitary way!    Kegland Part Number: KL05289

Read more less

The low-foaming version of Star San! Perfect for recirculating through pumps and transfer hoses or acid rinsing draft equipment Requires 2-3 minutes of contact time for effective sanitization Five Star Chemicals is a full-service cleaning provider with a proven record in the craft beverage industries since 1980 Buy in bulk for even more savings! Do you need a low-foaming cleaner to sanitize your equipment? Saniclean is the low-foam version of Star San. Made by the same company that makes your favorite cleaners, Star San and PBW! Saniclean does exactly what you want it to do: sanitize with low foam. It is also known as a flavor and odor remover, making it the perfect choice for acid rinsing your dispensing equipment. With a contact time of 2-3 minutes, it is not as fast as Star San, but works equally well. Particularly well suited for recirculation through pumps and transfer hoses. Dilute at a rate of 2oz Saniclean per 5 gallons of water. Please note: Due to DOT HAZMAT shipping restrictions, orders for 15-gallon, 55-gallon, or multiple 5-gallon units will require freight shipping.  

Read more less

Does your cleaner power through dirt in cold water? Craft Meister Alkaline Brewery Wash does! This versatile and powerful brewery cleaner dissolves quickly and cleans rapidly in cold water in addition to hot water. Ideal for overnight soaking as the solution does not lose effectiveness over time like oxygen based cleaners such as Oxi Clean. Excellent for recirculating keg washers, clean-in-place (CIP) systems, and unmatched at removing bottle labels. Craft Meister Alkaline Brewery Wash will not leave a white chalky film on your equipment like most oxygen based cleaners and rinses away with ease. Containers include a scoop for easy measuring. Feature Summary: Cleans effectively in cold water Works longer than oxygen based cleaners; perfect for overnight soaks Removes bottle labels with ease No chalky residue Avoid use on aluminum Non-caustic and will not burn skin or hands Dilution Rates: Fermenters, Fittings, Bottles and Tubing: use 1 oz (2 scoops) per gallon of water. For heavy soils and brew kettles use 2 oz (4 scoops) per gallon of water. Use: Spray or immerse surfaces and allow cleaner to loosen soil for 5-20 minutes. Rinse with clean water and sanitize, if required.

Read more less

You’ll never regret owning the right tool for the job!   This line brush is 1/4” in diameter and 36” long. You can use it to clean any 1/4” ID tubing in your brewery or draft setups. The long handle makes it convenient for long lengths of tubing.   Use it to clean: Draft lines Keg dip tubes Down tube on your Cornelius keg Racking canes Any tube or line that is 1/4” in diameter

Read more less

Quickly clean kegs and fermenters while you tend to other tasks High flow rate pump provides a powerful blast that coats the inside of the vessel Use it for cleaning or sanitizing with your favorite solutions 15L bucket provides a much larger reservoir compared to other models Everything included in the system neatly fits inside the bucket for easy storage The Bucket Blaster is a convenient and effective system for cleaning and sanitizing kegs, carboys, and other brewing vessels. The beauty of the Bucket Blaster is that you can set it and forget it. Simply set up the keg washer basin with your cleaner or sanitizer, set your vessel over the jet nozzle, power up the pump and let the Bucket Blaster do the work while you tend to other tasks. Perfect for homebrew kegs, carboys, FermZillas, or bucket fermenters. This unit comes with a 15L (3.9 gal) bucket, which doubles as a storage container when you are not using the system. Other keg washers come with a very small reservoir that make it a pain to move, as liquid spills over the sides easily and generally they just do not work as well. The Bucket Blaster's large 15L reservoir makes it much less likely for you to spill liquid on the floor, and since it can hold more cleaning solution, each cleaning cycle will be that much more effective. Includes: Submersible Pump - 2,000 L/hr 15L Bucket Powerful Jet Nozzle 9.5 mm EVABarrier Tubing Gray and Black Ball Lock Disconnects Duotight fittings for all connections Kegland Part Number: KL15905    

Read more less

This bottle brush design has stood the test of time.   This traditional design Beer Bottle Brush, is perfect for cleaning 12 to 22oz beer bottles. If there is any stuck-on residue or dust in the bottom of your bottles the rounded end of the brush will reach in and scrub it out!    Includes circular metal loop for hanging.    Bristles are 2.75" in diameter with an overall length of 16"

Read more less

Sodium Percarbonate is currently on backorder for all sizes. There is no estimated availability at this time. Typically used as a cleaning agent, it is a compound of sodium carbonate and hydrogen peroxide. Sold commercially as "Oxy-Clean" and various other names. For use in cleaning barrels, mix 0.25 to 0.5 ounces per gallon of barrel in cold or warm water, and dissolve completely. Pour into barrel, and top up with water (do not use hot water, it will release the hydrogen peroxide too quickly). Soak for a few minutes, up to a few hours. The longer the soak the more tannins will be extracted from the wood, reducing the life and flavor of the barrel. Drain the barrel, rinse with water, and rinse the inside of the barrel with a citric acid solution (1 tbsp citric acid per 5 gallons water) to neutralize the sodium carbonate. For general cleaning of equipment, use .5 to 1 ounces per gallon of water. Usage: 0.25 to 1.0 ounces per gallon of water Chemical name: Sodium percarbonate Compostion: Sodium carbonate peroxyhydrate >= 85% Carbonic acid sodium salt (1:2) <= 13% Sodium silicate SiO2/Na2O <= 1.5%

Read more less

A proprietary blend of food-grade phosphate buffers to lock in mash pH levels Takes the guesswork out of using brewing salts and acids to adjust your pH Reduces scaling in heat exchangers, fermenters, and kegs Optimize the enzymatic activity of malt, help clarify wort, and often raises the starting gravity Never worry about pH again! One tablespoon of 5.2 per 5 gallon batch and your water is instantly adjusted to the perfect pH of 5.2, no matter what your starting pH was. It will not add any flavors to your mash water whatsoever. 5.2 optimizes the enzymatic activity of your malt, helps to clarify the wort, and may even help to raise your starting gravities. Also, using 5.2 in the boil will give you more consistent hop usage, and will also keep hard water salts in solution, which will result in less scaling in your heat exchangers, fermenters, and kegs. If you are doing all-grain you add it to your mash water - 1 tablespoon per 5 gallon batch regardless of mash water volume. You do not need to add any extra to your Hot-Liquor tank or Boil Kettle.

Read more less

Clean-in-place your BrewZilla by using the built-in low volume pump Recirculate brewery wash and let the CIP Spray Rotor do the work! Only requires a 6W pump to spin the rotating head and get full effectiveness Easily adapted for use to clean fermenters and other vessels Finally! A CIP spray head designed specifically for use with smaller homebrew pumps. There are a lot of stainless steel CIP Spray Balls readily available for homebrewers but they require a fairly beefy pump to spin the head and make it effective. The new Low Volume CIP Spray Rotor can provide full spray coverage with as little flow rate as 3 gallons per minute. This makes cleaning your BrewZilla an absolute breeze by simply recirculating cleaning chemicals and letting the CIP Rotor spray down the inside of your brewery. Also a great option for brewers using the MKII Magnetic Drive Pump as the spray head can easily be adapted to clean all sorts of fermenters. What Can it Do? Clean-in-place your 35L, 65L or 100L BrewZilla. Simply cut your recirculation hosing, or purchase additional silicone hosing to get the right length for your setup. You will be able to find the optimum length required by testing with water first. We found great success using the glass lid to start with to see if it is coating everything that you need it to. Recommended for low voltage pumps as low as 6W up to 25W (roughly 3–5 GPM). If using a more powerful pump, you may need to throttle back the flow rate so you don't overpower the spray rotor. Includes: Custom molded rotating spray head with 1/2" BSP thread 11.8" (300mm) length of silicone tubing suitable for your BrewZilla recirculation arm Stainless nut and barb Please note: The rotating spray head can only be used in the downwards position, it cannot be tilted or mounted sideways or upside down. KegLand Part Number: KL04329

Read more less

The two most popular sizes of our two most popular cleaning and sanitizing products. Keeping your equipment cleaned and sanitized is the most important step toward making the best beer possible. Stock up on PBW and Star San at the same time, and save a couple bucks along the way! PBW PBW stands for Powder Brewery Wash, which is a non-hazardous buffered alkaline brewery cleaner. PBW is the cleaner of choice for many breweries, where it out performs more hazardous caustic chemicals without removing the flesh off your bones. PBW also will not corrode soft metals.  Comes in a jar with screw top lid.   When mixing hot water and PBW in an air or water tight space, it will create pressure. Please use caution when using PBW in enclosed equipment.   Star San Star San is an acid based sanitizer that is quick, odorless, tasteless and safe for most materials except softer metals. Use of 1 oz of Star San per 5 gallons of water and a contact time of 1 minute makes Star San very economical and convenient.   As a high foamer, Star San's foaming action insures coverage and contact time in larger vessels and better penetration into nooks and crannys. Any foam that is left over in your carboy or keg from the Star San solution will not harm your beer or you, and is perfectly safe and non-toxic, nor will it impart any flavors or odors. If you plan on making some up for spray application it is best to use distilled or RO water to maximize the life of the unused portion (minerals in tap water reduce the shelf life of Star San once in solution). Kit Includes: PBW - 1 lb (CL25A) Star San - 32 oz (CL26A)  

Read more less

Line brushes make quick work of build-up and deposits on the inside of your tubing that would otherwise be unreachable. Clean tubing is essential to preventing infected beers!   This 3/8“ x 48” line brush is flexible and easy to use,great for cleaning 3/8" transfer tubing.

Read more less

The same cleaning product that brewers love, but in an easy to dissolve liquid format. PBW (Powder Brewery Wash) is a non-hazardous buffered alkaline brewer cleaner. It's the cleaner of choice for many breweries, where it out performs more hazardous caustic chemicals without removing the flesh off your bones. PBW also will not corrode soft metals. It's effectiveness and ease of use has made it a go-to cleaning chemical for pros and home brewers alike. This new liquid format makes it even easier to whip up a batch of cleaning solution, even when using cold water. Add 1-2 oz per gallon of water and give a quick stir to mix.  

Read more less

A perfect size, food-grade, bucket that is a perfect fermenter for doing 1 gallon fermentations. Ideal for your next small batch of homebrew or fruit wine. Also a great container to store grain in. Wide opening allows for easy cleaning.  Lid sold separately. 9-1/4" H x 9-1/2" D (without lid) 9-7/16" H x 9-15/16" D (with lid)

Read more less

Mark’s Mark II Keg Washer™ is designed to clean and sanitize large vessels like cornelius kegs and carboys. This keg cleaner is also intended to provide a sanitation container for miscellaneous items such as airlocks, thermometers, tubing, keg fittings, and more. Quiet, Fun, & Easy to Use Very quiet when in use and most importantly speeds up the process of cleaning and sanitizing.    Light in weight.  Easy to store.  Cleans Kegs This keg washer cleans and sanitizes a cornelius keg without having to take apart the ball lock fittings, poppets, and dip tubes. You can clean the keg and the dip tube simultaneously using the T adapter. Cleans Tubing Too Cleans tube separately utilizing the pump with the additional barb fittings included.  Cleans Parts Reservoir holds 1.25 gallons of water making it easy to fill and empty with sanitizer.     Saves water and sanitizer.  The keg washer does not have an on/off switch, you can plug it directly into a wall outlet to operate the pump or plug it into an outlet that is controlled by a switch. Never leave the keg washer unattended when in use. When in use, fill the keg washer up to about 1 inch under the brim. The pump is not self priming, so always make sure the basin is full of water before plugging in the pump. Owner's Manual is included. Please read thoroughly before using. Dimensions of the inside of the washer's reservoir are: 6"L x 12"W x 4"D. Please Note: Product does not include the bucket, carboy, or keg pictured above for display purposes. The pump specs are: 520 GPH 120 Volts AC 40 watts Ceramic shaft, impeller  

Read more less

Convenient, easy, and simple – just the way cleaning should be. Never guess about how much cleaner you should be using with Craft Meister Keg & Carboy Cleaning Tablets, the easiest way to clean your dirty gear. Just fill the dirty keg or carboy with hot water, add Tablets and let them do the work for you! Similar to laundry detergent pods and dishwasher tablets, these handy Tablets are not only easier to use than bulk powder, they may be more cost effective over time by ensuring you use the correct amount of cleaner every time. Keg & Carboy Cleaning Tablets are a mix of powerful alkaline and oxygen detergents providing a one-two punch to knock out soils and build-up. Safe for use on glass, plastic, and stainless steel. Stir lightly to dissolve tablets. Use a brush or repeat for stubborn soils. If you are looking for a cleaner that works in cold water, or where you want it to sit overnight, we recomment you check out Craftmeisters Alkaline Brewery Wash. Directions: Carboy cleaning: Fill carboy with HOT water Add 2 tablets per 3 gallons of water For heavy soils, use 1 extra tablet per carboy or soak longer (up to 24 hours) Soak for at least 60 minutes Rinse thoroughly, then sanitize Keg cleaning: Fill keg with HOT water Add 1 tablet per 3 gallons of water Soak for at least 60 minutes Rinse thoroughly, then sanitize

Read more less

Line brushes make quick work of build-up and deposits on the inside of your tubing that would otherwise be unreachable. Clean tubing is essential to preventing infected beers!   This 1/2“ x 48” line brush is flexible and easy to use. Great for cleaning 1/2" transfer tubing, especially if the line was used with a carboy hood as a blow off.

Read more less

Spray it and you're done! This spray is useful for sanitizing ball valves on conical fermenters, and anything else you can't easily soak in sanitizer.    Alpet D2 Surface Sanitizer kills bacteria and wild yeast after a 60 second contact period! It contains isopropyl alcohol, water, and a residual bacterial killer called QUAT. No rinse, just allow to air dry.   Alpet D2 Surface Sanitizer is included on the EPA’s list of Disinfectants for use against Covid, SARS-COV-2. You can find more information HERE     Manufacturer Specifications: Safe for food contact surfaces Highly evaporative/no rinsing required Excellent for packaging areas, scales, display cases Will not impart taste onto food Ready-To-Use - no dilution/no mistakes Consistent measurable results Non corrosive to tools and metals Works where normal sanitizers cannot 60 second contact time 2 year shelf life

Read more less

Bottle washers make clean up and bottle maintenance much easier to deal with!  Using one of our bottle washers is definitely the fastest way to clean bottles and carboys. Works great on build up!   Our stainless bottle washer creates a jet-style stream that penetrates build-up in bottles or carboys. It is automatically activated when a bottle is pressed down onto the unit. Female hose thread connection.

Read more less

Easily connects the Bottle & Carboy Washer (CE10) to most kitchen sink faucets. Stainless steel construction.   Comes with two washers. For outside threaded faucets use adapter with only one washer; for inside threaded spout use both washers. Simply unscrew the screen assembly at the end of your faucet and screw the adapter in place.   Bottle & Carboy Washer sold separately.  

Read more less

Craft Meister Oxygen Brewery Wash is an oxygen based cleaner that dissolves quickly into solution and gets to work faster than competing products. Unlike other oxygen based cleaners, Oxygen Brewery Wash will not leave behind a chalky residue or film on your equipment. With more active cleaning oxygen than any similar product in the market and a non-caustic alkaline punch, Oxygen Brewery Wash blows away dirt and debris with ease. Works best with hot water (minimum 100 degrees Fahrenheit). For similar performance with cold water see the Craftmeister Alkaline Cleaner. Containers include a scoop for easy measuring. Feature Summary: More active oxygen than competing products Dissolves faster at lower temperatures than Oxi Clean or other oxygen cleaners Rinses faster with less water than other cleaners Cleans with active oxygen and non-caustic alkaline detergents Dilution Rates: For Fermenters, Fittings, Bottles and Tubing use 1 oz (2 scoops) per gallon of water. For heavily soiled equipment and Brew Kettles use 2 oz (4 scoops) per gallon of water. Use: Spray or immerse surfaces and allow cleaner to loosen soil for 5-20 minutes. Rinse with clean water and sanitize, if required.

Read more less

You clean your equipment to remove bacteria. Make sure the tool you’re doing it with doesn’t leave scratches that actually promote bacterial growth!   These pads are made of soft, woven fibers making them ideal for equipment cleaning. They are tough enough to scrub off scum and debris without scratching most surfaces. These scrubbers are the best choice for cleaning stainless steel. Also good for chrome, copper, porcelain, glass, and plastic!    9" L x 6" W x 1/4" thick. Sold in packs of three.

Read more less

Tight fitting lid for our 2 Gallon, food-grade, bucket fermenter, JAR20. 

Read more less

The same cleaning product that brewers love, conveniently pre-measured into dissolvable tablets. PBW (Powder Brewery Wash) is a non-hazardous buffered alkaline brewer cleaner. It's the cleaner of choice for many breweries, where it out performs more hazardous caustic chemicals without removing the flesh off your bones. PBW also will not corrode soft metals. It's effectiveness and ease of use has made it a go-to cleaning chemical for pros and home brewers alike. 10 g tablets are recommended for kegs, fermenters, and carboys. Use 1 tablet per 1 gallon of water. Also available in 2.5 g tablets, which are recommended for growlers, spray bottles, and glassware.  

Read more less

This L-shaped brush is the perfect tool for scrubbing every inch on the inside of carboys, and thanks to the plastic coating, they're also safe to use with plastic fermenters and PET carboys. Normal carboy brushes like our CE40 are great for cleaning glass carboys, but can be a risky choice for using on plastic. The metal rod where the bristles attach can scratch plastic, creating hide outs for bacteria. You won't have those worries with this carboy brush! Bristles made from Food Grade nylon Long enough to reach deep inside large carboys L-shaped bend allows you to easily scrub off leftover krausen residue Height from end of handle to 90° bend - 21.5" Brush section with bristles is 8.5" long Bristles are 2.75" in diameter Temperature rated to 140°F (60°C)  

Read more less

BrewBuilt CIP Spray Ball for use with X-Series Uni Conicals or any stainless steel fermenter with 1.5" tri-clamp fittings. The head emits a 360° fan spray that cleans above and below the spinning ball. The sharp spray easily removes soil inside your tank. The long neck design allows the spray ball to reach through tall fittings and ferrules. With a welded 90° elbow inlet, you won't have any trouble with kinked hosing slowing your pump flow and lowering the spray ball's performance. A pump capable of 30-45 psi and 11 GPM is recommended for this product to provide a high pressure cleaning radius of 3.6 ft. When used with BrewBuilt conicals, 7 GPM is enough to coat the full interior of the fermenter, but longer CIP runs might be required to fully breakdown stubborn solid deposits.

Read more less

Scrub your beer bottles clean with this bottle-shaped brush. Soak bottles in your preferred cleaning solution, scrub the inside with the bottle washing brush, and rinse. 17.5" long. Bristle section is 12" long. Kegland Part number: KL12997

Read more less

This non-caustic cleaning powder will make quick work of any stubborn soil build-up on your brewing equipment. TLC will help you brew your best beer possible by keeping your home brewery in tip-top condition. TLC is an efficacy proven alternative to caustic cleaners. Why You'll Love TLC: Versatile – TLC is a versatile cleaner and allows for both soak and low foam circulation cleaning. This product works at all temperatures. Effective – TLC is effective at removing the toughest caked on debris without scrubbing. It is non-corrosive and safe to use on soft metals. Safe – This product is safe on skin, and has no noxious fumes, while maintaining the effectiveness of heavy-duty caustic cleaners. Economical – TLC is an easy to use and economical choice for tank and line cleaning. Product Highlights: Non-caustic formula Great for circulation cleaning or parts soaking Effective at removing organic soils such as fats, greases, proteins, and yeast Effective at a wide temperature range Safe on soft metals Economical dilution Non-corrosive with the performance of a caustic cleaner Convenient pack sizes Oxygen booster for alkaline cleaning solutions Skin contact safe Gentle on rubber seals and gaskets  

Read more less

Copper scrub pads are great for cleaning stainless steel equipment, and can also be used as packing material for pot or reflux stills to enable the release of sulfides. Made from pure lead-free copper.   Kegland Part number: KL08907  

Read more less

Keeping your equipment clean and sanitary is the first step toward brewing a fantastic beer, but the number of products to choose from can make your head spin. That's why we put together a basic cleaning and sanitizing kit to set novice brewers on the path to success. Star San Star San is an acid based sanitizer that is quick, odorless, tasteless and safe for most materials except softer metals. Use of 1 oz per 5 gallons of water and a contact time of 1 minute makes Star San very economical and convenient. Craft Meister Alkaline Brewery Wash Does your cleaner power through dirt in cold water? Craft Meister Alkaline Brewery Wash does! This versatile and powerful brewery cleaner dissolves quickly and cleans rapidly in cold water in addition to hot water. Ideal for overnight soaking as the solution does not lose effectiveness over time like oxygen based cleaners such as Oxi Clean. Craft Meister Alkaline Brewery Wash will not leave a white chalky film on your equipment like most oxygen based cleaners and rinses away with ease. Spray Bottle A bucket full of sanitizer is great for soaking equipment, but not every job requires that much solution. This 8 oz Sanitizing Spray Bottle is the answer! Great for a quick spray on hands, fermenter valves, sample takers, etc. either before or immediately after use. Add 1/2 tsp (2 ml) of Star San with the plastic syringe and fill with water. Sanitizer will last up to 1 week before it is ineffective. Plastic Syringe The syringe is used to easily measure out 2 ml of Star San for the spray bottle. Kit Includes: Star San - 16 oz (CL26E) Alkaline Brewery Wash - 1 lb (CL41A) Plastic Syringe - 10 ml (MT118) Spray Bottle - 8 oz (CE96)

Read more less

If you want to keep your draft faucets clean, you’ll dig this special brush dedicated specifically for the job. This brush is the right diameter to give the interior of your faucet a good scrub, and short enough to avoid being unwieldy.    Ah, there’s nothing like the right tool for the job.   About 3/4" diameter.

Read more less

Craft Meister Growler Cleaning Tablets are the easiest and most effective way to keep all of your glass, stainless and plastic growlers clean and beer ready. Just fill the growler with warm water, add a Tablet, soak for 10-15 minutes, then dump and rinse. The Tablets rinse away easily with no fragrances, dyes or residues left behind. Also works great on drinking water bottles, Erlenmeyer flasks, and coffee mugs and pots. Directions: Fill Growler with warm water. Add 1 tablet and let dissolve. Soak for at least 10 minutes. Empty growler and rinse thoroughly. Repeat if necessary, sanitize if required. For heavy soils: Use 2 tablets. Let soak overnight up to 24 hours.  Increase water temperature.

Read more less