Holiday Gift Guide
Shop by collection
-
Hop Spider | Mesh Hop Filter | 0.4 mm Aperture | Stainless Steel
Keep vegetal matter contained and out of your fermenter with the Hop Spider mesh filter Sits directly in your boil kettle allowing hop oils to be directly infused into your wort Kettle hanger can be bent and adjusted to dial in the height at which the filter sits inside your kettle Holds up to 12 oz of hop pellets Made from 304 stainless steel The hop spider is stainless steel mesh hop filter that hangs from the the edge of your kettle. Up to 12 oz of hops are poured directly into the spider during the boil. Made from 304 stainless steel. The basket is 13.75 in (35cm) high with the opening at the top being 5.9 in (15cm) diameter and tapers down to a 3.9 in (10cm) diameter at the bottom. 0.4 mm aperture mesh. Kegland Part Number: KL04688
$38.49
-
Mesh Grain Bag | 27.5" x 32.5" | High-Quality Polyester | Brew-in-a-Bag | BIAB | Fits Most Pots and Kettles
Purpose-built grain bag for Brew-in-a-Bag (BIAB) brewing Fits most brewing kettles up to 19" in diameter Made from polyester webbing with 1" reinforced nylon seam liners Nylon forms 4 loops at the opening of the bag that make great handholds or can be used with a winch system Perfect for Brew in a Bag, this large 27.5" x 32.5" bag will fit pots up to 19" in diameter. These polyester bags have 1-inch wide nylon sewn over the seams, making them incredibly strong and resilient. At the opening of the bag the nylon forms 4 loops, making great handholds when lifting the bag or attaching to a winch system for large BIAB batches. 63 micron mesh Temperature rated to 230°F (110°C) Please note: when removing the bag from your kettle, always be sure to avoid thermometer probes and other accessories that may snag and tear the mesh. Be careful when using mash paddles and spoons, especially when the bag is full. Kegland Part Number: KL01304
$19.99
-
FerMonster Carboy With Spigot - 7 gal.
Smooth, ribless design prevents yeast and bacteria buildup, making sanitation a breeze Punted bottom and conical top promote sediment collection and reduce oxidation during storage Extra-wide 4" mouth opening simplifies filling, additions, and cleaning Constructed from heavy-duty, virgin PET plastic without plasticizers Made with food-grade and BPA-free materials The Ported Fermonster is a brand new fermenter designed specifically for fermentation. MoreBeer! gave product feedback for over 2 years of development and we think they nailed the design. The large lid allows for easy filling and makes hop or oak additions a breeze. The smooth sides are fantastic for sanitization - no ribs or texture to collect yeast or bacteria. The large 7 gallon size was designed to provide ample space for fermentation and you'll find the molded in volume markers super handy for accurate filling. The punted bottom allows sediment to collect to the sides so that you can siphon liquid from the center. Because they are made from virgin PET plastic they nearly unbreakable and a lot safer than similar glass carboys. Also notice the conical top which reduces surface area if you plan to store beer or wine long term. These ported versions come with our plastic spigot (FE347), allowing for easy racking and sampling! Made from heavy PET plastic, the same material used in 2 L soda bottles, which is nearly impermeable to oxygen penetration. Due to the thickness of the material and the overall geometry the Fermonster does not require ribs or dimples for stability. That results in a super smooth interior surface that reduces yeast and sediment buildup making it the easiest to clean, most sanitary PET carboy on the market. The huge 4" opening makes filling a breeze, and cleanup is as easy as wiping down the inside. The 7 gallon volume is a monster of a fermenter, reducing blowoff issues seen with standard 5 and 6 gallon carboys. Fermonsters are easily moved by hand or consider using our Carboy Carrier for even greater ease of use. These fermentors are completely air-tight and the lids sealed tight with an O-Ring. Additional O-Rings and Lids both with and without holes are available for purchase, see our You Might Also Need items below. Features: 4" wide mouth carboy - easy to clean! Ported version includes Spigot for easy racking Food grade PET plastic construction is nearly impermeable to oxygen penetration No hard to clean dimples or ribs Volume Markers at 5, 6, and 7 Gallons Punted bottom O-Ring and Lid with one hole is included (Fits #10 Stopper) Additional O-Rings and Lids available Weight: 1.5 lbs Temperature Limit: 140° F Height: 20.9 inches Diameter: 11.3 inches Completely taste and odor free Perfect for Beer, Wine, Cider, Mead, Kombucha or any other fermented beverage! Thick walls for better oxygen barrier.
$49.99
-
The FermWrap™ Heater | Fermentation Heater | 40 watts | 115V
Achieve consistent and optimal fermentation temperatures with the FermWrap Fermentation Heater. This flexible and easy-to-use unit wraps snugly around your fermenter, providing gentle and controlled heat. Use alone or simply plug into the 110V heatnig plug on most popular temp controllers Provides gentle, even heating with 40 watts spread over almost two square feet Keep your yeast happy and your ferment warm during those cold winter months with this flexible heater wrap! Don't be fooled by imitators and cheap knock-offs, this is the original FermWrap that has been produced by Fermentap for over a decade. Unlike those old heater belts, the FermWrap covers a wide area of your carboy or fermentation vessel, promoting an even heat distribution. Using tape to adhere, the FermWrap can be attached directly to your fermenter, or can be used to heat the space in a box (or refrigerator) that the fermenter is in. Depending on your configuration and insulation, you can increase the temperature of your ferment from 5-20°F. This differential can be increased by using the BrewBuilt™ Neoprene Carboy Sleeve. With 40 watts of heat spread over almost two square feet, it provides gentle, even heating. For more precise results, we recommend a temp controller and carboy thermowell. The controller will monitor the fermentation temp and only power on the FermWrap if the temperature drops below your set point. For the ultimate level of control, we recommend pairing it with the BrewBuilt CoolStix™ to provide cooling. With both accessories plugged into the temp controller, you'll get cooling or heating whenever you need it. Specs: 40 watts 115V 11" H x 25" W Item does not include carboy as pictured. Kegland Part number: KL0625
$32.99 $21.44
-
Inkbird Digital Temperature Controller
The Inkbird dual stage temperature controller is an easy to use and economical controller that is perfect for home brewing. Inkbird controllers allow you to control both heating and cooling, and set independent differentials for each to keep the exact temperature you need. The Ink bird ITC-308S controller performs many of the same functions as the Ranco or Johnson but at a more affordable price, making it a great alternative for temperature control. Aside from brewing uses, this is a great dual relay output temperature controller for cooking (use in a smoker or bbq), home growing (heat mats for seedlings, climate control), or any other DIY project you come up with! Features: Simple plug and play design with user friendly LED interface Dual stage ITC-308 - control both heating and cooling Adjustable Heating/Cooling differential 1000W max power Celsius or Fahrenheit High and low temperature and sensor fault alarms Can control temperatures of -58° F through 210° F (-50° C - 99° C) Body Dimensions: 5.5 in x 2.7 in x 1.3 in
$44.99
-
KegLand Oxebar Mono PET Keg | Plastic Reusable Bottle | Cary Handle & Reusable Screw Cap Included | 2.1 Gallons | 8L
Oxebar Mono is a lightweight 2-gallon keg with high oxygen barrier properties compared to standard PET plastic Add the Ball Lock Adapter Tapping Head to easily pressurize and dispense at home or on the go Lighter than traditional glass growlers. Easier and safer to transport Made from Nylon impregnated PET for superior oxygen barrier Wedge seals on the optional Tapping Head and Ball Lock Caps eliminate points of oxygen ingress found where rubber is traditionally used Lower total oxygen pickup compared to a standard corny keg lid seal This 2-gallon keg is lightweight, compact and has high oxygen barrier properties with 3x better (meaning less) gas transmission than traditional PET grades of plastic making it suitable for beer storage or other oxygen sensitive carbonated and non-carbonated beverages. This product is sold with the PCO38 cap, however if you would like to dispense this product through a draft system, we recommend the use of the Ball Lock Adapter Tapping Head. The tapping head is sold separately and allows you to attach standard ball lock disconnects and pressure relief valve to the top of the keg. What is Oxebar Mono Oxebar Mono is a PET polymer blend that utilizes several polymers blended together to significantly improve gas barrier properties. When compared with standard PET plastic, Oxebar Mono is able to reduce oxygen ingress and CO2 loss so your precious beverage is preserved and shelf life extended by 3x. We recommend this product for beer storage of up to 6 months. Dimensions: Diameter: 6.1" (155 mm) Height: 20.5" (520 mm) Pressure Rating: 58 psi (4 BAR) Temperature Rating: 113°F (45°C) KegLand Part Number: KL22347 NOTE: Oxebar kegs are marked with a manufacturer’s “expiry date”. This does not indicate that the keg is bad after this date; it simply indicates that a hydro test may be in order. 2 years after production and every 2 years after first use, it is recommended that the keg be hydro tested to ensure the tank is holding pressure. Hydro test instructions are available here. You will also need the KG520 Tapping Head and D1072 Green PRV to perform the test. If you do not plan to pressurize the keg, the test is not necessary.
$15.49
-
Fermonster Carboy - 6 gal. With Spigot
Smooth, ribless design prevents yeast and bacteria buildup, making sanitation a breeze Punted bottom and conical top promote sediment collection and reduce oxidation during storage Extra-wide 4" mouth opening simplifies filling, additions, and cleaning Constructed from heavy-duty, virgin PET plastic without plasticizers Made with food-grade and BPA-free materials The Ported Fermonster is a brand new fermenter designed specifically for fermentation. MoreBeer! gave product feedback for over 2 years of development and we think they nailed the design. The large lid allows for easy filling and makes hop or oak additions a breeze. The smooth sides are fantastic for sanitization - no ribs or texture to collect yeast or bacteria. The 6 gallon size is great for most fermentations, and the larger 7 gallon is available for even bigger beers. The punted bottom allows sediment to collect to the sides so that you can siphon liquid from the center. Because they are made from virgin PET plastic they nearly unbreakable and a lot safer than similar glass carboys. Also notice the conical top which reduces surface area if you plan to store beer or wine long term. These ported versions come with our plastic spigot (FE347), allowing for easy racking and sampling! Made from heavy PET plastic, the same material used in 2 L soda bottles, which is nearly impermeable to oxygen penetration. Due to the thickness of the material and the overall geometry the Fermonster does not require ribs or dimples for stability. That results in a super smooth interior surface that reduces yeast and sediment buildup making it the easiest to clean, most sanitary PET carboy on the market. The huge 4" opening makes filling a breeze, and cleanup is as easy as wiping down the inside. Fermonsters are easily moved by hand or consider using our Carboy Carrier for even greater ease of use. These fermentors are completely air-tight and the lids sealed tight with an O-Ring. Additional O-Rings and Lids both with and without holes are available for purchase, see our You Might Also Need items below. Features: 4" wide mouth carboy - easy to clean! Ported version inlcudes spigot for easy racking Food grade PET plastic construction is nearly impermeable to oxygen penetration No hard to clean dimples or ribs Volume Markers at 5 and 6 Gallons Punted bottom for less sediment transfer during racking O-Ring and Lid with one hole is included (Fits #10 Stopper) Additional O-Rings and Lids available Weight: 1.5 lbs Temperature Limit: 140° F Height: 19.25 inches Diameter: 11.25 inches Completely taste and odor free Perfect for Beer, Wine, Cider, Mead, Kombucha or any other fermented beverage! Thick walls for better oxygen barrier.
$47.99
-
Duotight BlowTie 2 | Complete Kit | Diaphragm Spunding Valve | Built-In Pressure Gauge | 0-15 PSI | 8 mm Duotight | Duotight Ball Lock Quick Disconnect (QD)
Automatically release pressure inside your fermenter during pressure fermentations Regulate beer flow during pressurized transfers from fermenter to keg Built-in pressure gauge for easy reference when adjusting the spunding valve Pressure gauge is interchangeable—swap to different pressure ranges that better suit your application Diaphragm spunding valves offer higher accuracy compared to spring & poppet spunding valves Comes complete with Duotight ball lock QD and rigid joiner With this complete kit you'll be ready to use the BlowTie 2 Spunding Valve right out of the box. The BlowTie is used to release excess pressure on a pressurized fermenter or from a receiving keg during pressure transfers. This diaphragm spunding valve is much more accurate than the spring and poppet style, and works much better at lower pressures. This version of the Spunding Valve Kit includes the Duotight Ball Lock QD which allows you to attach the BlowTie directly to the QD via the 8 mm rigid joiner. The BlowTie 2 can also be upgraded with a Digital Mini Pressure Gauge. Pressure Fermentation Pressure fermentation is becoming more and more popular at the homebrew level, but in order to do it safely and accurately, you need a way to release excess pressure. You'll pressurize your vessel to your desired psi, but once fermentation begins and those hungry, active yeast start creating CO2, the pressure inside the vessel will increase. Attach a spunding valve and set it to your desired pressure, and it will blow off when the pressure gets to high and close up again when it's back to your desired psi. Pressure Transfers Even if you don't have a pressurizable fermenter, you may have done pressure transfers from keg to keg during filtering or after fining. During pressure transfers, it's a good idea to have a bit of head pressure in the receiving keg, especially if you're transferring beer that is already carbonated. Having a spunding valve in place will allow you to consistently control the head pressure and give you more consistent results, without losing carbonation in the process. Diaphragm vs. Poppet With the poppet style spunding valve, a spring pushes against a poppet to keep the valve closed. When the poppet lifts up to open, the surface area the gas pushes against becomes larger, and the spring has to work harder to push the poppet down and reseal the valve. This can lead to more gas being released than intended, and the remaining pressure in your vessel may be at a lower psi than your spunding valve’s set psi. Instead of a poppet, the spring inside the BlowTie pushes against a diaphragm, which has an immensely larger surface area. This means the surface area that the gas pushes against while the diaphragm is closed is significantly closer to the surface area it pushes against when the diaphragm is open. This leads to higher accuracy, and the remaining pressure after excess gas is released will be much closer to your set blow off pressure. Kit Includes: BlowTie 2 w/ Integrated Pressure Gauge (0-15 psi) 8 mm Duotight Gray Ball Lock Disconnect 8 mm OD Rigid Plastic Joiner
$28.99
-
Ferrari Bottle Tree | Sanitizer Injector
If you have spent uncounted hours washing and sanitizing bottles on bottling day, then you know what a drag that can be. Save time and simplify your life by making this tool a regular part of your bottling process. Simply add some sanitizing solution the the clear dish section of the injector, then place a bottle upside down one the white nozzle and pump it a few times to spray sanitizer inside the bottle. The nozzle provides the correct spray pressure and coverage to fully coat the inside of the bottle in just a few pumps. Able to be installed on top of our Ferrari brand rotating bottle trees (B510 or B517), or used separately on the countertop. It only takes a few minutes to sanitize 2 cases of bottles, letting you get on with bottling and then the rest of your day! Please Note: Does not fit other brand bottle trees or on the Ferrari fixed based tree with handle (B518).
$19.99
-
FerMonster Carboy - 7 gal.
Smooth, ribless design prevents yeast and bacteria buildup, making sanitation a breeze Punted bottom and conical top promote sediment collection and reduce oxidation during storage Extra-wide 4" mouth opening simplifies filling, additions, and cleaning Constructed from heavy-duty, virgin PET plastic without plasticizers Made with food-grade and BPA-free materials The Fermonster is a brand new fermenter designed specifically for fermentation. MoreBeer! gave product feedback for over 2 years of development and we think they nailed the design. The large lid allows for easy filling and makes hop or oak additions a breeze. The smooth sides are fantastic for sanitization - no ribs or texture to collect yeast or bacteria. The large 7 gallon size was designed to provide ample space for fermentation and you'll find the molded in volume markers super handy for accurate filling. The punted bottom allows sediment to collect to the sides so that you can siphon liquid from the center. Because they are made from virgin PET plastic they nearly unbreakable and a lot safer than similar glass carboys. Also notice the conical top which reduces surface area if you plan to store beer or wine long term. Made from heavy PET plastic, the same material used in 2 L soda bottles, which is nearly impermeable to oxygen penetration. Due to the thickness of the material and the overall geometry the Fermonster does not require ribs or dimples for stability. That results in a super smooth interior surface that reduces yeast and sediment buildup making it the easiest to clean, most sanitary PET carboy on the market. The huge 4" opening makes filling a breeze, and cleanup is as easy as wiping down the inside. The 7 gallon volume is a monster of a fermenter, reducing blowoff issues seen with standard 5 and 6 gallon carboys. Fermonsters are easily moved by hand or consider using our Carboy Carrier for even greater ease of use. These fermentors are completely air-tight and the lids sealed tight with an O-Ring. Additional O-Rings and Lids both with and without holes are available for purchase, see our You Might Also Need items below. Features: 4" inner diameter wide mouth carboy - easy to clean! Food grade PET plastic construction is nearly impermeable to oxygen penetration No hard to clean dimples or ribs Volume Markers at 5, 6, and 7 Gallons Punted bottom O-Ring and Lid with one hole is included (Fits #10 Stopper) Additional O-Rings and Lids available Weight: 1.5 lbs Temperature Limit: 140° F Height: 20.9 inches Diameter: 11.3 inches Completely taste and odor free Perfect for Beer, Wine, Cider, Mead, Kombucha or any other fermented beverage! Thick walls for better oxygen barrier.
$47.99
-
Reina del Sol Lager | Corona Extra® Mexican Lager Clone | 5 Gallon Beer Recipe Kit | All-Grain
Modeled after the most popular Mexican-style lager in the U.S., Corona Extra. Light, crisp, and refreshing Includes 100% Galena hops Estimated ABV: 4.7% Estimated IBUs: 15 Makes 5 gallons of finished beer Sometimes you just want a reliable, simple beer that you know will quench your thirst. Our Reina del Sol Lager is modeled after the most popular Mexican-style lager in the U.S., Corona Extra. Whether you're relaxing under the sun on a pool day or getting beat down by merciless rays on a chore day, you can always count on this crisp, refreshing Mexican Cerveza to cool you off. In that fashion, we designed a straightforward recipe that consists of Pilsner malt, flaked corn and a scoop of Carapils with two dashes of Galena hops to provide just a kiss of bitterness. To make it a true to form cerveza, ferment cold with a Mexican yeast strain like CellarScience® BAJA. Originally developed and popularized by the Modelo Group, this Mexican yeast strain produces clean lagers and finishes dry. Makes 5 gallons Estimated Original Gravity: 1.044-49 SRM (Color Range): 3 IBUs: 15 Estimated Alcohol Percentage: 4.7% Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts.
$25.99
-
BrewZilla Neoprene Jacket | 35L | Gen 4 | Sparge Arm Sleeve | Improves Heating Times | Reduces Heat Loss | Removable for Faster Chilling
Add this neoprene jacket to your Gen 4 BrewZilla to speed up heating! Heating is 10% faster and heat loss from the boiler is reduced by 50% Remove the jacket after the boil to speed up chilling Thick, insulating neoprene is secured to the boiler body with a sewn-on hook and loop fastener strap Sparge arm sleeve included to reduce heat loss during mash recirculation Add some insulation to your BrewZilla to get better boils! This neoprene jacket will help keep the heat in for quicker and more vigorous boils. Slap it on to speed up heating; take it off to speed up chilling. Also includes a neoprene sleeve for the recirculation arm to reduce heat loss during the mash. This jacket will fit Gen 4 BrewZilla models. It is not compatible with older generations of BrewZillas and DigiBoils due to where the cutouts on the jacket are located. Features: 10% faster heat up time 50% less heat loss from boiler Fits the 35L BrewZilla Gen 4 Made from 8 mm thick neoprene which is easy to wash after use KegLand Part Number: KL24365
$27.49
-
Yeast Starter Kit (Starter Yeast) - 2000 mL
Yeast starters offer higher cell counts at the time the yeast is pitched, leading to faster, healthier fermentations and better tasting beer! You may be wondering how to make a yeast starter. Well, lucky for you this kit contains everything you need for making your own yeast starter right out of the box, including step-by-step instructions! This is the most common size used to make yeast starters using liquid yeast, great for higher alcohol beer and cold fermented lagers. In the lab world, these flasks are known as "Student Grade," meaning there may be some cosmetic flaws in the glass, and the volume measurements are approximate due to variations in the thickness of the glass walls of the flask. This makes it a great flask for making yeast starters--at a great price! We do not recommend the use of an electric element with these flasks. If this cannot be avoided, we suggest using a larger pot as a hot water bath on the stove.
$27.49
-
MoreBeer! Gift Card | Instant Email Delivery
Don't know a mash tun from a malt pipe? Don't sweat it. Give them the MoreBeer! Gift Card. Think of it as Future Beer Money. You buy the card, they buy the ingredients, and eventually, you both enjoy a cold pint. It’s a win-win. Instant Email Delivery (Perfect for last-minute gifting!) Redeemable on thousands of products. The easiest way to support their brewing obsession.
$10.00 - $500.00
-
Holiday Hops IPA | Sierra Nevada Celebration IPA® Clone | 5 Gallon Beer Recipe Kit | All-Grain
A classic West Coast IPA modeled after Sierra Nevada's Celebration. Balanced malt character, deep reddish color and plenty of hop bitterness Includes Chinook, Cascade, and Centennial hops Estimated ABV: 6.6% Estimated IBUs: 64 Makes 5 gallons of finished beer There are certain beers that you can't help but associate with a specific time of year, and there might be no better example than Sierra Nevada's Celebration IPA. As the year begins to wind down and we enter the holiday season, our eyes instinctively start scanning the shelves for those striking red labels. Once you've enjoyed that first pint of Sierra's signature seasonal release, it's hard to resist leaning into the holiday spirit. Sierra brews this recipe every year with their most recent haul of fresh, hand-selected hops, making each release slightly unique to past iterations. Even though our clone kit doesn't contain fresh hops, we strived to make a recipe that celebrates the character of Cascade, Centennial, and Chinook hops with heaps of citrus, piney, and floral notes. Our Holiday Hops kit is a classic West Coast IPA with a distinct, but balanced malt character, deep reddish color and plenty of hop bitterness to match the bite of winter weather. Cascade, Centennial, and Chinook hops are employed up and down the brew schedule, from the top of the 90-minute boil to the final dry hop addition days before packaging. We highly recommend using a Chico yeast strain for fermentation—it's a Sierra Nevada ale recipe after all! Makes 5 gallons Estimated Original Gravity: 1.061-66 SRM (Color Range): 12 IBUs: 64 Estimated Alcohol Percentage: 6.6% Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts.
$43.99
-
Artisan Hops® Hop Shot - Cascade/Willamette Hop Extract Blend - 10 mL
The Artisan Hops® Hop Shot is an easy way to boost IBUs without adding vegetal matter to your beer. This CO2 hop extract is a blend of Cascade and Willamette hops, which will impart a slight citrus, fruity character to your beer. 1 mL boiled in 5 gallons of 1.050 wort for 60 minutes will add approximately 7 IBUs. Add to boiling wort only. We recommend softening the extract before use. Place the syringe in a warm glass of water at the beginning of your brew day, or create a slurry by adding the extract directly to a small amount of pre-boiled water. 10 mL syringe 68% Cascade 32% Willamette Citrus, Fruity Store in the refrigerator between uses.
$8.99
-
Reina del Sol Lager | Corona Extra® Mexican Lager Clone | 5 Gallon Beer Recipe Kit | Extract
Modeled after the most popular Mexican-style lager in the U.S., Corona Extra. Light, crisp, and refreshing Includes 100% Galena hops Estimated ABV: 4.7% Estimated IBUs: 15 Makes 5 gallons of finished beer Sometimes you just want a reliable, simple beer that you know will quench your thirst. Our Reina del Sol Lager is modeled after the most popular Mexican-style lager in the U.S., Corona Extra. Whether you're relaxing under the sun on a pool day or getting beat down by merciless rays on a chore day, you can always count on this crisp, refreshing Mexican Cerveza to cool you off. In that fashion, we designed a straightforward recipe that consists of Pilsner malt extract, flaked corn and a scoop of Carapils with two dashes of Galena hops to provide just a kiss of bitterness. To make it a true to form cerveza, ferment cold with a Mexican yeast strain like CellarScience® BAJA. Originally developed and popularized by the Modelo Group, this Mexican yeast strain produces clean lagers and finishes dry. Makes 5 gallons Estimated Original Gravity: 1.044-49 SRM (Color Range): 3 IBUs: 15 Estimated Alcohol Percentage: 4.7% Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All included steeping grains will come milled. Liquid Malt Extract (LME) vs. Dried Malt Extract (DME) MoreBeer! recipe kits are offered in both Liquid Malt Extract and Dry Malt Extract so that our customers can choose the format that best suits their needs and brewing style. LME is a viscous liquid, similar in consistency to maple syrup. In addition to being the more affordable option, many brewers find LME easier to handle than dry extract. DME is more condensed and comes in a powder format that is similar to baking flour. Although it’s a little more costly, DME is naturally lighter in color and stays fresher for longer. We highly recommend DME when brewing light colored beers.
$28.99 - $37.99
-
Ferrari Bottle Tree | Rotating Base | 45 Seat
Makes managing sanitized bottles for a whole batch easy, and lets you get the bottling mess out of the kitchen--no more using the dishwasher rack to hold sanitized bottles. The Rotating Bottle Tree holds 45 bottles. It will simplify the bottling process. Just rinse the bottles out well after use and store upside down on the bottle tree where they remain clean. When you want to bottle, use the optional Sanitized Injector (B520) to spray sanitizing solution, such as Star San or SaniClean, into the bottles to sanitize. Wait 1 minute and bottle. You can also do the sanitizing ahead of time and let the bottles air dry upside down. Made by Ferrari Group in Italy.
$34.99
-
The Ultimate Growler (Stainless Steel) - 64 oz
Completely impervious to oxygen and sunlight and made from 304 stainless steel, this growler is one of the best storage options for beer. This growler comes with a double wall vacuum insulation keeping your delicious beer cold for hours. The spring wired lid makes this growler capable of holding up to 30 psi. This is a smokin deal when compared to other double wall growlers. Dimensions: 4.75 in. Diameter x 12 in. Height; Holds 2L or 67 oz Draft Kit is out now! Kegland Part number: KL04282
$27.49
-
Nectaron® Heavenly Haze Single Hop Hazy IPA | 5 Gallon Beer Recipe Kit | All-Grain
Our single-hop Hazy IPA series dedicated to expressing the newest hops when they hit the scene Includes 100% Nectaron® hops from boil, to whirlpool, to dry hopping Nectaron® Flavor/Aroma: Grapefruit, peach, pineapple Estimated ABV: 6.7% Estimated IBUs: 32 Makes 5 gallons of finished beer Heavenly Haze is our series of single-hop Hazy IPAs. Whenever a hip new hop hits the scene, we're as excited to brew with it as you are! We developed Heavenly Haze to use a straight-forward hazy IPA malt bill as a base that's shared between all Heavenly Haze recipe kits—the only thing that changes is your hop of choice! This allows you to really zero in on the different flavors and aromas of one particular hop, and it's how we recommend experiencing a new hop you haven't brewed with before. We'll continue to expand our Heavenly Haze series to include newly released hops that are perfect for NEIPAs, as well as circle back to include some of our favorite hazy hops that have long been available. Nectaron® is a dual purpose hop with intense notes of grapefruit, peach, and pineapple. Well suited for all hop forward styles including IPAs, New England IPAs, and Hazy Pale Ales. A triploid aroma type, developed in collaboration with New Zealand’s Plant & Food Research. Nectaron® Brand HORT4337 is a full sister to Waimea. Makes 5 gallons Estimated Original Gravity: 1.061-66 SRM (Color Range): 4-5 IBUs: 32 Estimated Alcohol Percentage: 6.7% Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts. Nectaron® is a trademark owned by New Zealand Hops Limited Company
$36.99
-
FerMonster Carboy - 6 gal.
Smooth, ribless design prevents yeast and bacteria buildup, making sanitation a breeze Punted bottom and conical top promote sediment collection and reduce oxidation during storage Extra-wide 4" mouth opening simplifies filling, additions, and cleaning Constructed from heavy-duty, virgin PET plastic without plasticizers Made with food-grade and BPA-free materials The Fermonster is a brand new fermenter designed specifically for fermentation. MoreBeer! gave product feedback for over 2 years of development and we think they nailed the design. The large lid allows for easy filling and makes hop or oak additions a breeze. The smooth sides are fantastic for sanitization - no ribs or texture to collect yeast or bacteria. The 6 gallon size is great for most fermentations, and the larger 7 gallon is available for even bigger beers. The punted bottom allows sediment to collect to the sides so that you can siphon liquid from the center. Because they are made from virgin PET plastic they nearly unbreakable and a lot safer than similar glass carboys. Also notice the conical top which reduces surface area if you plan to store beer or wine long term. Made from heavy PET plastic, the same material used in 2 L soda bottles, which is nearly impermeable to oxygen penetration. Due to the thicknes of the material and the overall geometry the Fermonster does not require ribs or dimples for stability. That results in a super smooth interior surface that reduces yeast and sediment buildup making it the easiest to clean, most sanitary PET carboy on the market. The huge 4" opening makes filling a breeze, and cleanup is as easy as wiping down the inside. Fermonsters are easily moved by hand or consider using our Carboy Carrier for even greater ease of use. These fermentors are completely air-tight and the lids sealed tight with an O-Ring. Additional O-Rings and Lids both with and without holes are available for purchase, see our You Might Also Need items below. Features: 4" wide mouth carboy - easy to clean! Food grade PET plastic construction is nearly impermeable to oxygen penetration No hard to clean dimples or ribs Volume Markers at 5 and 6 Gallons Punted bottom O-Ring and Lid with one hole is included (Fits #10 Stopper) Additional O-Rings and Lids available Weight: 1.5 lbs Temperature Limit: 140° F Height: 19.25 inches Diameter: 11.25 inches Completely taste and odor free Perfect for Beer, Wine, Cider, Mead, Kombucha or any other fermented beverage! Thick walls for better oxygen barrier.
$43.99
-
Milwaukee Digital pH Meter - 0-14 pH Range
A simple, low cost pH meter eliminates the guesswork of using pH strips. Simple 1-point calibration, accuracy to 0.1 pH units, and a pH 0-14 range make this tester incredibly easy to live with. No more guessing at your mash pH! Includes calibration screwdriver, batteries and user manual. Milwaukee Part Number: pH600AQ
$34.50
-
33 Brews: A Homebrewing Log and Brew Journal
Keep track of everything on brew day with this handy brewing journal. This journal will keep all of your brewing notes organized and professional. Good brewing notes make good beers. Bound with recycled cardboard, this journal is a compact 5 in. x 7 in.
$4.99
-
BrewZilla Neoprene Jacket | 65L | Gen 4 | Sparge Arm Sleeve | Improves Heating Times | Reduces Heat Loss | Removable for Faster Chilling
Add this neoprene jacket to your Gen 4 BrewZilla to speed up heating! Heating is 10% faster and heat loss from the boiler is reduced by 50% Remove the jacket after the boil to speed up chilling Thick, insulating neoprene is secured to the boiler body with a sewn-on hook and loop fastener strap Sparge arm sleeve included to reduce heat loss during mash recirculation Add some insulation to your BrewZilla to get better boils! This neoprene jacket will help keep the heat in for quicker and more vigorous boils. Slap it on to speed up heating; take it off to speed up chilling. Also includes a neoprene sleeve for the recirculation arm to reduce heat loss during the mash. This jacket will fit Gen 4 BrewZilla models. It is not compatible with older generations of BrewZillas and DigiBoils due to where the cutouts on the jacket are located. Features: 10% faster heat up time 50% less heat loss from boiler Fits the 65L BrewZilla Gen 4 Made from 8 mm thick neoprene which is easy to wash after use KegLand Part Number: KL24372
$32.99
-
Mash Paddle Stainless Steel - 36 in.
Let this mash paddle unleash your inner Pro Brewer! This 36 inch, 100% Stainless Steel Mash Paddle is perfect for any size mash tun. It can stir large volumes and it’s a snap to clean and sanitize. The paddle itself is a solid piece of stainless steel with no holes in it. Because there are many different theories about mash paddle design, this paddle is left solid so that you can customize the hole pattern to your preferences. If you like, we do offer one drilled configuration, the AG431A.
$30.99 $26.34
-
Holiday Hops IPA | Sierra Nevada Celebration IPA® Clone | 5 Gallon Beer Recipe Kit | Extract
A classic West Coast IPA modeled after Sierra Nevada's Celebration. Balanced malt character, deep reddish color and plenty of hop bitterness Includes Chinook, Cascade, and Centennial hops Estimated ABV: 6.6% Estimated IBUs: 64 Makes 5 gallons of finished beer There are certain beers that you can't help but associate with a specific time of year, and there might be no better example than Sierra Nevada's Celebration IPA. As the year begins to wind down and we enter the holiday season, our eyes instinctively start scanning the shelves for those striking red labels. Once you've enjoyed that first pint of Sierra's signature seasonal release, it's hard to resist leaning into the holiday spirit. Sierra brews this recipe every year with their most recent haul of fresh, hand-selected hops, making each release slightly unique to past iterations. Even though our clone kit doesn't contain fresh hops, we strived to make a recipe that celebrates the character of Cascade, Centennial, and Chinook hops with heaps of citrus, piney, and floral notes. Our Holiday Hops kit is a classic West Coast IPA with a distinct, but balanced malt character, deep reddish color and plenty of hop bitterness to match the bite of winter weather. Cascade, Centennial, and Chinook hops are employed up and down the brew schedule, from the top of the 90-minute boil to the final dry hop addition days before packaging. We highly recommend using a Chico yeast strain for fermentation—it's a Sierra Nevada ale recipe after all! Makes 5 gallons Estimated Original Gravity: 1.061-66 SRM (Color Range): 12 IBUs: 64 Estimated Alcohol Percentage: 6.6% Liquid Malt Extract (LME) vs. Dried Malt Extract (DME) MoreBeer! recipe kits are offered in both Liquid Malt Extract and Dry Malt Extract so that our customers can choose the format that best suits their needs and brewing style. LME is a viscous liquid, similar in consistency to maple syrup. In addition to being the more affordable option, many brewers find LME easier to handle than dry extract. DME is more condensed and comes in a powder format that is similar to baking flour. Although it’s a little more costly, DME is naturally lighter in color and stays fresher for longer. We highly recommend DME when brewing light colored beers.
$48.99 - $58.99
-
The Kettle Spider
Make your brew day easier and your additions more efficient with a Kettle Spider. Attach one of our reusable nylon bags with drawstring and use the Kettle Spider to steep grains in an extract batch or use for multiple hop additions in a boil. Often when you use a bag for hops or grain you are not getting the full extraction of flavor or alpha acids. With an ideal placement in the middle of your kettle, the Kettle Spider aids in extraction of flavor, oils and alpha acids. The Kettle Spider makes bags easier to use with hops because it is open throughout the boil. Just keep adding the hops your recipe calls for. Also keeps bags off the bottom of the kettle, preventing a hole from developing in your bag. Tip: To secure your bag, try attaching a Keg Lid O-ring around the ring to hold your bag in place. Adjustable arms w/ anti-slip silicone sleeves Hole Diameter: 3.79" Arm Length: 9.15" Max Kettle Diameter: 20.5" Please note that this item does not include a mesh bag.
$39.99 $33.99
-
Recirculation Arm Extension for Boiler Extension | BrewZilla | DigiBoil
This arm extension allows you to continue using the BrewZilla's recirculation arm after adding a boiler extension kit. Compatible with both 35L and 65L models. Compatible with Gen 3 / Gen 4 BrewZillas. KegLand Part Number: KL26413
$32.99
-
Monster Bench Bottle Capper
Easy to use and will stand up to years of hard work. Trigger grip adjustment mechanism makes it easy to adjust height for different size bottles, and secure locking mechanism. Can be bolted to a bench for added stability. Reinforced base and steel column Reinforced plastic head and metal piston Use with standard 26 mm crown caps / bottle caps Has a pulling lever-type action that requires minimum exertion. Compatible with bottles from 3" to 14" in height. Full cup 26 mm steel capping head. For 29 mm capping head, See related product.
$59.99
-
Heating Belt Fermentation Heater
This 30W Heating Belt will gently warm your fermenter without creating major hot spots. Heating belts are often chosen over heating pads for the simplicity of adjusting the height of the belt on your fermenter to increase or decrease the heat transfer. And they're especially useful for smaller vessels where a heating pad would be simply too large. For the best results, pair the Heating Belt with a temperature controller so that heating is only provided when your fermentation drops below your set point. If you're using a fermentation chamber or other form of chilling, the temperature controller will be able to switch between heating and cooling as needed. Comes with a standard 2-prong US style 110V plug. Please disregard the example photo that shows an AU style plug. KegLand Part Number: KL01953
$21.99 $14.29
-
Riwaka™ Heavenly Haze Single Hop Hazy IPA | 5 Gallon Beer Recipe Kit | All-Grain
Our single-hop Hazy IPA series dedicated to expressing the newest hops when they hit the scene Includes 100% Riwaka™ hops from boil, to whirlpool, to dry hopping Riwaka™ Flavor/Aroma: Citrusy grapefruit, kumquat Estimated ABV: 6.7% Estimated IBUs: 32 Makes 5 gallons of finished beer Heavenly Haze is our series of single-hop Hazy IPAs. Whenever a hip new hop hits the scene, we're as excited to brew with it as you are! We developed Heavenly Haze to use a straight-forward hazy IPA malt bill as a base that's shared between all Heavenly Haze recipe kits—the only thing that changes is your hop of choice! This allows you to really zero in on the different flavors and aromas of one particular hop, and it's how we recommend experiencing a new hop you haven't brewed with before. We'll continue to expand our Heavenly Haze series to include newly released hops that are perfect for NEIPAs, as well as circle back to include some of our favorite hazy hops that have long been available. The kiwis keep it coming with yet another hop varietal that's bursting with character. Riwaka™ varietal 85-6-23 was originally bred by New Zealand Hops by crossing Saaz with specially developed breeding selections. The result was a highly aromatic hop with almost double the oil content of its parent Saaz. Realesed in 1997, this was once an exceedingly difficult hop to get your hands on outside of New Zealand, as it was quickly bought up by the native brewers. With an almost 1:1 alpha to beta acids ratio, this rockstar aroma hop gives off strong notes of citrusy grapefruit and kumquat. Perfect for new world pale ales, IPAs, hoppy lagers, and any beer you want a bold fruity hop character to shine. Makes 5 gallons Estimated Original Gravity: 1.061-66 SRM (Color Range): 4-5 IBUs: 15 Estimated Alcohol Percentage: 6.7% Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts. Riwaka™ is a trademark owned by New Zealand Hops Limited Company
$36.99
-
Nectaron® Heavenly Haze Single Hop Hazy IPA | 5 Gallon Beer Recipe Kit | Extract
Our single-hop Hazy IPA series dedicated to expressing the newest hops when they hit the scene Includes 100% Nectaron® hops from boil, to whirlpool, to dry hopping Nectaron® Flavor/Aroma: Grapefruit, peach, pineapple Estimated ABV: 6.7% Estimated IBUs: 32 Makes 5 gallons of finished beer Heavenly Haze is our series of single-hop Hazy IPAs. Whenever a hip new hop hits the scene, we're as excited to brew with it as you are! We developed Heavenly Haze to use a straight-forward hazy IPA malt bill as a base that's shared between all Heavenly Haze recipe kits—the only thing that changes is your hop of choice! This allows you to really zero in on the different flavors and aromas of one particular hop, and it's how we recommend experiencing a new hop you haven't brewed with before. We'll continue to expand our Heavenly Haze series to include newly released hops that are perfect for NEIPAs, as well as circle back to include some of our favorite hazy hops that have long been available. Nectaron® is a dual purpose hop with intense notes of grapefruit, peach, and pineapple. Well suited for all hop forward styles including IPAs, New England IPAs, and Hazy Pale Ales. A triploid aroma type, developed in collaboration with New Zealand’s Plant & Food Research. Nectaron® Brand HORT4337 is a full sister to Waimea. Makes 5 gallons Estimated Original Gravity: 1.061-66 SRM (Color Range): 4-5 IBUs: 32 Estimated Alcohol Percentage: 6.7% Liquid Malt Extract (LME) vs. Dried Malt Extract (DME) MoreBeer! recipe kits are offered in both Liquid Malt Extract and Dry Malt Extract so that our customers can choose the format that best suits their needs and brewing style. LME is a viscous liquid, similar in consistency to maple syrup. In addition to being the more affordable option, many brewers find LME easier to handle than dry extract. DME is more condensed and comes in a powder format that is similar to baking flour. Although it’s a little more costly, DME is naturally lighter in color and stays fresher for longer. We highly recommend DME when brewing light colored beers. Nectaron® is a trademark owned by New Zealand Hops Limited Company
$41.99 - $49.99
-
Water: A Comprehensive Guide for Brewers (Book)
Water is arguably the most critical and least understood of the foundation elements in brewing beer. Water: A Comprehensive Guide for Brewers, third in Brewers Publications’ Brewing Elements series, takes the mystery out of water’s role in the brewing process. From an overview on sources, quality and geography, the book leads brewers through how to read water reports, understanding flavor contributions, and the treatment and chemistry of brewing water. A discussion of adjusting water to styles of beer, residual alkalinity, malt acidity, mash pH, brewery process water and wastewater treatment is included. Written by John Palmer and MoreBeer!'s own Colin Kaminski.
$19.95
-
NukaTap® Stainless Steel Beer Faucet | Forward Sealing
Newest faucet design on the market! Reduced first pour foam due to low thermal mass Forward-sealing design prevents beer residue from gumming up the faucet Unique shuttle design greatly improves laminar flow, improving the pour of carbonated beverages Compatible with all Intertap faucet accessories and shanks First Pour Foam Reduction Every kegerator owner knows the letdown of pouring your first pint of the day and getting too much foam. Even with perfectly balanced draft lines, first pour foam is sometimes unavoidable simply due to the temperature of the faucet itself. Running beer through the faucet will drop the temperature, and the foaming will subside, but not without a bit of wasted beer from pouring off excess head. The NukaTap beer faucet drops to beer serving temperature much faster thanks to its lower thermal mass. Simply put, the bulkier the faucet is, the more beer is needed to flow through and chill the tap. The NukaTap is over 20% lighter than its Intertap predecessor, and even lighter still compared to other brands of faucets. Improved Laminar Flow The inspiration for the NukaTap name comes from its uniquely designed "nuke-shaped" shuttle that resides on the inside of the faucet. The NukaShuttle went through numerous rounds of redesigns and countless hours of testing to find a shape that provides superior laminar flow. This means that liquid passes by the shuttle with very little resistance, allowing highly carbonated beers or hard seltzers to pour like a dream. Sanitary Design The NukaShuttle is the world’s first seamless single-piece design. Traditional taps feature an o-ring seated on a stainless steel shuttle, which can cause a couple of issues. After many pours, the stainless shuttle rubbing against the internal body of the faucet will create small fissures that become potential infection sites, and the seated o-ring can be difficult to clean in place, making your draft cleaning and sanitizing process less effective than you realize. The NukaShuttle is an advanced TPV rubber matrix that has been seamlessly formed over a durable PP skeleton. This single-piece design eliminates the pitfalls of older manufacturing methods, making it one of the most sanitary faucets on the market. Forward Sealing vs. Rear Sealing From tap rooms to home bars, forward-sealing faucets are the ideal choice for any draft setup. In traditional rear-sealing taps, beer will drain out of the entire faucet when it's in the closed position. This means the internal mechanism is coated in beer, which then dries and becomes a sticky residue. Forward-sealing faucets, on the other hand, keep the tap full of beer so it never has a chance to dry and gunk up the internal parts. This makes the faucet much easier to clean and also reduces the chance of off flavors transferring to your beer while you pour. Made from stainless steel Shuttle made from TPV O-rings made from EPDM NSF approved Kegland Part Number: KL15509
$39.99
-
Intertap® Stainless Steel Beer Faucet | Forward Sealing
Forward-sealing design prevents beer residue from gumming up the faucet! Threaded spout can be replaced with a variety of attachments Unique sliding shuttle design allows the faucet to last longer than standard floating o-ring design 304 stainless steel construction The patented Stainless Steel Intertap Faucet is a forward sealing faucet that represents the most modern faucet design. It has a modular, threaded spout which can fit a variety of different attachments including a growler filler or a stout spout. In normal rear-sealing faucets the entire faucet has to drain of beer. In forward-sealing faucets the faucet keeps beer in it so the inside doesn't have a chance to get sticky, making cleaning much easier. It also reduces the chance of off flavors transfering to your beer while you pour. Other forward sealing faucets use a floating o-ring, which is just as sanitary but requires the o-ring to move inside the faucet body in order to seal correctly. This can become a problem as the faucet ages. Intertap faucets use a sliding shuttle that guides the o-ring into the perfect position every time. The threaded spout easily unscrews from the faucet and can be replaced by a growler filler or stout spout quickly and easily. Pour a pint and then fill a growler in no time at all. 304 Stainless Steel construction so you don't have to worry about chrome plating wearing off and exposing your beer to brass. Kegland Part number: KL00970
$42.99
-
Pop Cultures | Fermented Hot Sauce Making Kit
Make unbelievably delicious hot sauce at home with the Pop Cultures Hot Sauce Kit! Fully customizable, amazingly fresh, and good for you too, homemade fermented hot sauce is the perfect condiment to have in the fridge at all times! Bring the fresh ingredients, and the Pop Cultures Hot Sauce Kit gives you everything else you need to transform peppers into a hot sauce that is as spicy and tangy as you choose. The complete step-by-step instructions are easy to follow, and give you a recipe to start with, and inspiration for ways to customize your next batch of hot sauce. Before you know it, you’ll be ready to host your very own episode of Hot Ones! The Pop Cultures Hot Sauce Kit makes a great gift for the spice lover in your life, or anyone that enjoys DIY projects and making their own everything! All of the Pop Cultures Kits are great projects for the whole family to enjoy. Discover • Create • Share • Enjoy Includes: 1 Gallon Fermentation Jar Lid with Airlock Fermentation Weight Stick-on Thermometer Sea Salt Easy to follow step-by-step instructions You Will Also Need: A blender for blending up your hot sauce. Hot sauce bottles, new or recycled from the fridge.
$34.99
-
MoreBeer!® Trucker Hat - Blue
What do you like? More Beer? Let it be known with this cool MoreBeer! Trucker hat. This is the only hat that we've carried where the entire staff gives it a thumbs up. Check out our facebook page to see some MoreBeer! staff looking straight up legit.
$17.99 $15.29
-
Pop Cultures | Fermented Pickle Making Kit
Now you can have homemade pickles in the fridge at all times with the Pop Cultures Fermented Pickle Kit! Homemade pickles have the irresistible crunch and bright flavor you know and love, while being fresher and even better for you. With easy to follow, step-by-step instructions, you’ll go from start to fermenting in about 30 minutes. Then, you’ll be able to monitor fermentation right from your kitchen, testing your pickles after a week and determining when they taste to your liking. There are other pickle kits out there, but no other kits are giving you this kind of bang for your buck! Most kits on the market give you a 32 oz or half-gallon jar, but the Pop Cultures Pickle Kit features a 1 gallon jar! You bring the fresh ingredients, and the Pop Cultures Pickle Kit gives you everything else you need to make delicious homemade pickles. The Pop Cultures Pickle Kit and all of the other Pop Cultures kits make great gifts for those that love DIY projects, and enjoy the fun of making their own! Plus, they’re a great way to spend time with friends and family too! Discover • Create • Share • Enjoy Includes: 1 Gallon Fermentation Jar Lid with Airlock Fermentation Weight Stick-on Thermometer Sea Salt Pop Cultures Pickling Spice Mix Black Tea Easy to follow step-by-step instructions
$34.99
-
BrewBuilt® Whirlpool Return Fitting | 1.5" T.C.
The BrewBuilt Whirlpool Return Fitting allows you to recirculate wort in your boil kettle without sacrificing one of your tri-clamp ports. Install it in any tri-clamp kettle's thermometer port and attach your preferred valve to the side inlet. The front of the fitting can be capped off with a 1.5" T.C. end cap, or you can pair with the BrewBuilt Thermowell Offset to install a thermometer or temperature probe.
$64.99
-
How To Brew by John Palmer
If you want to learn the art of homebrewing, this book is the place to start. How To Brew contains basic information for the first time brewer and technical information for the Master Brewer. This was the first book to include legitimate in-depth information on all-grain brewing at home. The author is a passionate homebrewer and a metallurgist by trade. There is a great section on the different metals involved in brewing and how to treat and care for them. The information in this book is so valuable, you will continue to refer back to it year after year--we know we do. This is a new and updated version of How To Brew with more emphasis on the "top five priorities": Sanitation Fermentation Temperature Control Proper Yeast Management The Boil The Recipe There are also 5 new chapters: Malting and Brewing Strong Beers Fruit Beers Sour Beers Adjusting Water for Style
$24.95
-
EasyDens & SmartRef Combo | Anton Paar
Our take on unlocking the additional readings when used together: In addition to the individual benefits and readings that both machines offer, the EasyDens and SmartRef can be used together to gain the addtional following measurements in finished beer or wine. These measurements do not require that you have an upfront original measurements. Beer: Alcohol by volume, Alcohol by weight, Final Gravity, Original Gravity (wow), and Real Extract Wine: Alchol by volume and Residual Sugar (very cool) The EasyDens and SmartRef device can now be used together to provide additional measurement parameters Determines alcohol content using density and refractive index measurements Quick results in under 5 seconds Determiniation of wort extract content Fermentation tracking and visualization Automatic temperature correction (ATC) Precise alcohol content determination (0.5% v/v) Unlimted ABV measurements with app subscription Measure finished beer and receive results for: ABV Real extract Original gravity Final gravity Suitable for standard and strong beer New App Features & Updates: Sync all data to the cloud Unlimited ABV measurements with an app account Wine Meister Alcohol & Total Extract in Wine: Get direct results in fermenting or finished kombucha Barcode: Assign measurement data via barcode scan to a batch Residual Sugar Calculator Brew Meister Alcohol in Kombucha: Get direct results in fermenting or finished kombucha Lab Meister TDS%: Using the SmartRef it is possible to measure TDS% in coffee Extract yield of coffee: A calculator is available that lets you calculate the extract yield for the different types Percolation brewing method (eg. Espresso, V60) Immersion brewing method (eg. French press) Mixed phases methods (eg. Aeropress) New measurement units: Now SmartRef support 40+ measurement units New Languages Now supported: English, German, French, Italian, Czech, Portuguese, Turkish, Chinese, Japanese, Spanish Direct ABV determination with the EasyDens & SmartRef Combo Beer: alcohol content (±0.5 %v/v), real extract (±0.2 %w/w), original gravity (±0.8 %w/w) and total extract (±2.0 g/L) Wine: alcohol content (±0.5 %v/v for wines up to 15% and ±1.0 %v/v for wines from 15 to 20 %v/v) Kombucha: alcohol content (±0.5 %v/v) Liquor: alcohol content (±0.5 %v/v) Application specific in-app calculators Beer: color calculator, refractometer brix correction, ABV (OG/FG) calculator, converter for gravity, temperature & more Wine & Fruits: brix acid correction, residual sugar calculator, converter for gravity, temperature & more Coffee: extraction and TDS calculator Spirits: converter for gravity, temperature & more Compatible with RAPT Pill & Tilt Hydrometer Measurement data from these devices can be seamlessly integrated into your Brew Meister and Wine Meister batches The EasyDens & SmartRef Beer Combo includes: SmartRef Digital Refractometer: 1x SmartRef 2x Batteries 4x Pipettes EasyDens Digital Density Meter: 1x EasyDens 2x Batteries 1x Syringe 1x Waste hose 1x Adapter luer SmartRef Digital Refractometer | Anton Paar Wide measuring range from 0 to 85 °Brix (0 to 62.7 °P) Accuracy of 0.2 °Brix (0.2 °P) Built-in wort and alcohol correction for beer that is fully configurable Quick readings – results in under 2 seconds Automatic temperature compensation (ATC) Small sample volume requirement (0.4 mL) Free iOS/Android app The SmartRef Digital Refractometer by Anton Paar is a portable smart pocket device suitable for a wide range of requirements. The SmartGuide+, as a feature in the mobile app, automatically checks any errors of ambient light, impurity, and sample behavior during measurement for you. The device offers more than 15 different measurement units with automatic temperature compensation. Depending on your need, SmartRef enables you to measure the extract content of your beer, the sugar content in wine, the sweetness of fruits and vegetables, the moisture of honey, the salt content of your aquarium or pool, and much more. Smart Technology for Consistent Results The SmartRef portable refractometer is used in combination with a free mobile app for Android and iOS via Bluetooth Low Energy and enables intelligent handling of the measurement results. The app permits easy storage, visualization, management, and sharing of measurement data. SmartGuide+ detects and helps eliminate measurement problems through high ambient light detection, continuous checking of prism and sample condition, and more. In addition to the quick measurement mode, measurements in continuous mode allow a more detailed understanding of the samples’ properties. Over-the-air updates keep your digital refractometer up-to-date with the latest features. SmartRef Measurement Details The SmartRef refractometer measures the refractive index of fluids. This allows retrieval of relevant sample properties in a wide variety of applications. Fast temperature stabilization and automatic temperature compensation for measurement results make additional calculations and correction tables obsolete. The unit has an IP6 rating and an easy-to-clean stainless steel sample well. SmartRef supports a one-point zero adjustment with distilled water and requires only a few drops of sample (0.4 mL). SmartRef displays results in under two seconds and has a measurement range of 0 °Brix to 85 °Brix with an accuracy of 0.2 °Brix. High Variety of Measurement Applications Brix refractometer: For wine, juice, honey, sauces, jams, fruits, vegetables, and maple syrup. The SmartRef measures the sugar content in °Brix, °Babo, °Baumé, °KMW, and °Oechsle. Salinity refractometer: SmartRef determines the salt content in your saltwater aquarium and pool in salinity specific gravity (SG 20/20), practical salinity units (PSU), and salinity in parts per thousand (ppt). Beer refractometer: SmartRef shows the extract content of wort in °Plato. Coffee refractometer: Measure total dissolved solids to assess coffee strength and extraction quality. Instantly calculates extraction yield, letting you dial-in strength, acidity, and sweetness for any brew method. Pet Care Meister: Reads urine specific gravity (USG) to help track hydration in cats, dogs, and other large mammals. As a smart device, SmartRef offers a constant expansion of measurement units. All available scales are provided within the app. Technical Specifications: Measuring Range Refractive index (RI) at 20°C: 1.3330 – 1.5040 Brix: 0° to 85° Sample Temperature: 10°C – 100°C (50°F – 212°F) PSU (practical salinity units): 0 – 50 Salinity ppt (parts per thousand): 0 – 150 Salinity S.G. (20/20): 1.000 – 1.114 Accuracy Refractive index (RI): ±0.0003 Brix: ±0.2° Temperature: 0.5 °C (0.9 °F) PSU (practical salinity units): ±2 Salinity ppt (parts per thousand): ±2 Salinity S.G. (20/20): ±0.002 Resolution Refractive index (RI): 0.0001 Brix: 0.1° Temperature: 0.1°C (0.1°F) PSU (practical salinity units): 1 Salinity ppt (parts per thousand): 1 Salinity S.G. (20/20): 0.001 Further Specifications Sample Volume: 0.4 mL Measurement Time: <2 s Automatic Temperature Compensation 20 °C (ATC) %Brix: 10°C – 100°C (50°F – 212°F) Automatic Temperature Compensation 20 °C (ATC) PSU, ppt, S.G. (20/20): 10°C – 40°C (50°F – 104°F) Mobile Operating System: Android and iOS Data Dimensions (L x W x H): 108mm x 64mm x 35mm (4.3" x 2.5" 1.4") Weight (incl. batteries): ~135 g (0.31 lbs) Power Supply: 2x AAA 1.5V LR03 alkaline batteries (included) or AAA NiMH rechargeable batteries Enclosure Rating: IP6 according to IEC 60529 Condition Ambient Temperature: 10°C – 40°C (50°F – 104°F) Air Humidity: 5% RH – 95% RH, non-condensing Battery Lifetime: ~10,000 measurements Storage Temperature: 10°C – 40°C (50°F – 104°F) Interface: Bluetooth™ Low Energy Frequency Band: 2400 MHz – 2480 MHz Transmitter Power: 7.5 dBm max. (5.6 mW max.) Part Material Sample Area: Stainless steel and glass, FKM O-Ring Enclosure Housing: Flame retardant PBT/PC, UL94-V0 The EasyDens by Anton Paar Anton Paar is a leading producer of analytical testing equipment for commercial breweries. Borrowing some technology from their high end machines, the EasyDens digital gravity/alcohol tester is designed for savvy homebrewers and small commercial breweries. It is a precision gravity/density testing unit which can accurately read gravity with a tiny 2 ml sample at any point in the brewing process. Alcohol % can also be tracked at any point during fermentation. The unit hooks up to your smartphone via Bluetooth and stores various fermentation "profiles" enabling you to track fermentation progress, alcohol levels, and help know when it's time to keg & drink your beer! See the documents tab for frequently asked questions about the Easy Dens. Features: Take a highly accurate gravity reading at any point in the brewing process even when alcohol is present. Very fast and simple to use Only uses 2ml of sample Automatic Temperature Compensation Connects and displays via free app on your phone or tablet Based on oscillating u-tube principle which is known as world's most accurate testing method Extremely durable Measures in specific gravity and alcohol can be determined with original reading App features graphing for gravity and alcohol App stores batch records (10) and can email a batch record as a .csv for saving. Specifications: Measuring Range Extract: –10 %w/w to 40 %w/w Sugar: –10 °Brix to 80 °Brix Specific Gravity (SG): 0.700 - 1.200 Alcohol: 0 %v/v to 100 %v/v Temperature: 5 °C to 30 °C / 41 °F to 86 °F Accuracy Extract: 0.3 %w/w Sugar: 0.3 °Brix Specific Gravity (SG): 0.001 Alcohol: 0.5 %v/v Temperature: 0.2 °C / 0.4 °F Resolution Extract / Sugar / Alcohol: 0.1 %w/w / °Brix / %v/v Specific Gravity (SG): 0.001 Temperature: 0.1 °C / 0.1 °F Additional Specifications: Sample volume: approx. 2 mL Ambient temperature: 5 °C to 35 °C / 41 °F to 95 °F Storage temperature: 5 °C to 35 °C / 41 °F to 95 °F Humidity Range: 5 % to 90 % relative air humidity, non-condensing Interface: Bluetooth Low Energy Power supply: Two 1.5 V LR6 AA alkaline batteries or two AA NiMH rechargeable batteries Battery operation lifetime: > 40 hours Dimensions: 120 mm × 80 mm × 35 mm / 4.7 in × 3.1 in × 1.4 in Weight (incl. batteries): 200 g / 7 ounces Mobile Operating System: Android 4.3 and higher; iOS 7.0 and higher Latest Updates to Meister Apps New batch design with a more detailed user interface Integrated beer style database Recipe creation and management Custom measurement values and labels ABV measurement for light beer, hard seltzer, and cider with the EasyDens & SmartRef Combo (in addition to existing support for standard and strong beer, wine, liqueur, and kombucha) Fermentation tracking for wine with SmartRef (previously only possible with EasyDens) Calorie determination for measurements with EasyDens, SmartRef, and the EasyDens & SmartRef Combo in Brew Meister and Wine Meister Tilt Hydrometer and RAPT Pill support in Brew Meister and Wine Meister
$899.00
-
Riwaka™ Heavenly Haze Single Hop Hazy IPA | 5 Gallon Beer Recipe Kit | Extract
Our single-hop Hazy IPA series dedicated to expressing the newest hops when they hit the scene Includes 100% Riwaka™ hops from boil, to whirlpool, to dry hopping Riwaka™ Flavor/Aroma: Citrusy grapefruit, kumquat Estimated ABV: 6.7% Estimated IBUs: 32 Makes 5 gallons of finished beer Heavenly Haze is our series of single-hop Hazy IPAs. Whenever a hip new hop hits the scene, we're as excited to brew with it as you are! We developed Heavenly Haze to use a straight-forward hazy IPA malt bill as a base that's shared between all Heavenly Haze recipe kits—the only thing that changes is your hop of choice! This allows you to really zero in on the different flavors and aromas of one particular hop, and it's how we recommend experiencing a new hop you haven't brewed with before. We'll continue to expand our Heavenly Haze series to include newly released hops that are perfect for NEIPAs, as well as circle back to include some of our favorite hazy hops that have long been available. The kiwis keep it coming with yet another hop varietal that's bursting with character. Riwaka™ varietal 85-6-23 was originally bred by New Zealand Hops by crossing Saaz with specially developed breeding selections. The result was a highly aromatic hop with almost double the oil content of its parent Saaz. Realesed in 1997, this was once an exceedingly difficult hop to get your hands on outside of New Zealand, as it was quickly bought up by the native brewers. With an almost 1:1 alpha to beta acids ratio, this rockstar aroma hop gives off strong notes of citrusy grapefruit and kumquat. Perfect for new world pale ales, IPAs, hoppy lagers, and any beer you want a bold fruity hop character to shine. Makes 5 gallons Estimated Original Gravity: 1.061-66 SRM (Color Range): 4-5 IBUs: 15 Estimated Alcohol Percentage: 6.7% Liquid Malt Extract (LME) vs. Dried Malt Extract (DME) MoreBeer! recipe kits are offered in both Liquid Malt Extract and Dry Malt Extract so that our customers can choose the format that best suits their needs and brewing style. LME is a viscous liquid, similar in consistency to maple syrup. In addition to being the more affordable option, many brewers find LME easier to handle than dry extract. DME is more condensed and comes in a powder format that is similar to baking flour. Although it’s a little more costly, DME is naturally lighter in color and stays fresher for longer. We highly recommend DME when brewing light colored beers. Riwaka™ is a trademark owned by New Zealand Hops Limited Company
$41.99 - $49.99
-
NukaTap® Mini Beer Faucet Assembly Kit | Flow Control Ball Lock Quick Disconnect (QD) | Duotight Adapter | Self Closing Spring
The ultimate portable draft faucet! Compact & lightweight with all the advantages of a standard NukaTap forward sealing faucet Includes NukaTap Mini, Flow Control Ball Lock QD, Duotight Adapter, and Self Closing Spring Forward-sealing design prevents beer residue from gumming up the faucet Reduced first pour foam due to low thermal mass and conductivity Perfect for mobile draft, mini kegs, sampling from fermenters, and can even be installed on your kegerator or keezer Mini Design – Ideal Flow Rate for Small Systems Most conventional beer faucets are designed with 3/8" diameter spouts so you can pour a pint in just over 10 seconds. This type of flow rate is great for high turnover bars and commercial venues but isn't necessary or even desirable for all applications. For compact portable systems and home draft systems, a slower flow rate is easier to control and further reduces foaming issues due to the low liquid volume stored in the body of the faucet. The NukaTap Mini is also more ideal for pouring smaller doses. For example, cocktails where 5-8 oz of liquid is dispensed is difficult to control with a high flow rate tap. For portable systems, the NukaTap Mini with the Flow Control Ball Lock QD & Duotight Adapter assembly is small enough to literally put in your pocket, making it ideal for mini keg setups that you want to be portable or that you want to easily fit inside a domestic fridge where space is tight. Forward Sealing Forward sealing faucets are absolutely the way to go when it comes to beer taps. Old legacy taps still exist in the industry that are simply poorly designed. The issue with rear sealing faucets is that beer dries up on the internal piston. Aside from being unsanitary, as more and more beer dries up in these components the faucet can almost glue completely shut causing damaged seals or broken handles (this is particularly the case if it's left for some time to dry out with beer inside). These older legacy designs still exist probably due to poor education. The forward sealing designs do not have this problem and the tap drains out completely with no beer drying up on the mechanical moving parts in the same way. This makes the tap more sanitary and reduces maintenance. In many instances the price is similar so there is no reason to use a poorly designed rear sealing faucet. All NukaTap faucets are forward sealing. Laminar Flow Just like the NukaTap SS and NukaTap FC, the NukaTap Mini has been designed with laminar flow in mind. Laminar flow is critical for a beer tap as it means you will pour the beer with minimal foaming and a substantial reduction in wastage. Think about how many times a beer faucet opens and closes in its lifetime. 1,000 or maybe 10,000 times? Laminar flow saves wasted beer in excessive foam and the better laminar flow easily pays for itself in a reduction in lost beer. To use poorer designed faucets is essentially flushing money down the sink. Extensive modeling has been done on the NukaTap design to improve laminar flow. Integrated Seals That Are Indestructible and More Sanitary Unlike other designs, the NukaTap Mini body is made from Polyketone (POK) making it strong, robust, and able to be autoclaved. The seals are also over-molded from Santoprene® making them hard wearing so they will literally last for the lifetime of the tap without the need for replacement. Santoprene® and POK both have excellent resistance to chemicals such as caustic soda, peroxide, phosphoric acid, lactic acid, citric acid, acetic acid, and all common chemicals sold and used in the beverage industry. The seals internally are over-molded meaning no fissures or cracks exist for bacteria, crud, or yeast to hide. Superior First Pour Foam Due to Low Thermal Mass and Conductivity First pour foam is an issue caused by a warm tap body. For most faucets to pour well it's important to dispense enough beer to cool the tap body down to reach maximum performance. In addition to this the conductivity of the tab body also makes this worse so insulative materials simply work better than conductive materials. The NukaTap mini not only has very low thermal mass but is also highly insulative being made mostly from Santoprene® and POK. The combination of these two factors in conjunction with superior laminar flow makes for the lowest "first pour foam" effect out of any tap ever produced. Long Shank Alternative Most conventional beer faucets require a large 3/4" hole to be drilled through the side of your refrigerator, keezer, or cold box wall. Traditional long shanks also generally have a large volume of liquid that sits inside the wall unrefrigerated which is not ideal. New long shank alternatives developed for the NukaTap Mini are designed to suit any wall thickness and greatly reduces the stagnant beer sitting in the shank itself. For walls up to 2.7" thick, these wall mount shank kits include three screws, however if the wall is thicker, you can also use 6 small wood screws or something similar and attach three screws from the front and 3 from the back allowing you to go into any wall type. Another advantage of this new design is the tap will never accidentally rotate. Typically, other long shank beer taps rely on the hex nut on the shank to be done up tight enough to prevent rotation but if the wall compresses (often the case with foam walls) the tap is allowed to rotate. This new design has three fixing points making it impossible for the tap to rotate accidentally as the interlocking teeth behind the collet allow you to set the angle and then do up the collet to fix the tap permanently in that position.
$43.99
-
Double Laser Infrared Thermometer Gun
Take temperature readings instantly and from a safe distance with this infrared thermometer gun. Use it to check how close you are to the hot break before your boil, or measure the temp of your empty mash tun and grains to help predict temperature loss when you add strike water and mash in. Dual lasers is an important feature when choosing infrared thermometers because it allows for much higher accuracy. When measuring an object, a dual laser thermometer gun will help you greatly in finding the convergence point of the measured target and spot ratio. This can only be achieved with a dual laser unit. Features: Double Laser pointer for higher accuracy Simple one-handed operation Laser ON/OFF switch Low battery indication LED backlight Reads in °F / °C Automatic shutdown after 15 seconds Display hold, Scan function FCC, CE, ROHS Certified Notes: 1. When using this product to measure temperature, consider the ratio between the distance (the length from the product to the measured object) and the size of the measurement area, referred to as the object distance ratio. When the distance between the product and the measured object increases, the measurement area will increase accordingly. 2. If you want to use boiled water to measure the unit's accuracy, do not allow smoke or water vapor to contact the temperature sensing area, and keep the measurement angle at 45 ~ 60 degrees. KegLand Item Number: KL21883
$38.49
-
Pop Cultures | Italian Cheese Making Kit
Make unbelievably fresh Italian cheese at home with the Pop Cultures Italian Cheese Kit! All the equipment and instructions needed for multiple batches of fresh mozzarella and ricotta! Making cheese at home is easier than it sounds, especially with the Pop Cultures Italian Cheese kit! With easy to follow, step-by-step instructions, you can make multiple batches of fresh mozzarella and ricotta cheese right from your kitchen. Once you taste how delicious homemade fresh Italian cheese is, you’ll want to always have some available! The Pop Cultures Italian Cheese kit makes a great gift for a cheese lover, a home cook, or anyone that loves a fun DIY project. Plus, cheese making is a great way to spend time with friends and family, and is an activity that is definitely made easier with multiple sets of hands around! Discover • Create • Share • Enjoy Includes: Cheese Basket Cheese Cloth Pocket Thermometer Sea Salt Vegetarian Rennet Tablets Citric Acid Easy to follow step-by-step instructions
$24.99
-
1 Gallon Homebrew Starter Kit & Summer Wheat Recipe
This 1 Gallon Starter Kit is the the easiest way to get started homebrewing! Our Homebrew Starter Kit leverages your existing 2 gallon pot to make 1 gallon (about ten 12 oz bottles) of craft beer right in your kitchen in just a few hours! Our thoughtfully crafted Ingredient Refill Kits include everything you need for your batch, from grain bag to bottle caps. Unlike some other manufacturers there are no costly add-on packages needed to complete the brewing process. Our recipes span a wide range of classic and modern beer styles, you’re not limited to only very bland or very esoteric recipe choices. One thing they do share, though, is our decades of experience in brewing and crafting world-class beers; experience we’re now sharing directly with you! If you’ve ever thought about brewing your own beer at home, there’s no reason to hesitate any further. This is the starter kit you’ve been waiting for. Equipment Kit Contents Wide Mouth, Easy-To-Clean 1 Gallon Fermenter Jar Fermenter Jar Lid w/ 3-Piece Airlock Mini Auto-Siphon makes transfers a breeze Food-Grade Transfer Tubing Premium Bottle Filling Wand Bottle Capper Sanitizer Concentrate Summer Wheat Recipe Kit (see below for more info) Summer Wheat Recipe Kit A mild, low-bitterness, smooth beer for easy, frequent drinking. The perfect summer time thirst quencher! Because of it’s clean, mild profile, this beer is an excellent candidate for incorporating fruit extracts, flavorings or other ingredients to customize your brew! Color/Body: Blond/Light Bitterness: Low Estimated Alcohol: 3.8% Plus, EVERY Brewmaster Beer Ingredient Refill Kit comes complete with everything you need for your next batch of beer, including: Specialty Steeping Grains Fermentable Malt Extract Brewer’s Hops Brewer’s Yeast Disposable Grain Bag (for recipes w/ steeping grains only) Carbonation Drops Bottle Caps *Note: You will need to save up or purchase 10-12 12oz PRY-OFF (not twist-off) beer bottles.
$59.99
-
Pluto | Beverage Gun | Hand Held Beer Faucet | Stainless | Black Nylon
The Pluto Beverage Gun is the ultimate hand held beer tap! If you have been dispensing your draft beer out of a standard picnic tap, it's time to upgrade. Definitely one of the coolest draft beer taps that we've seen, this Pluto Beverage Gun is made from nylon and stainless steel. The body is plastic, while the barb, piston, and spring are all stainless. Comes with a 1/4" duotight-compatible barb perfect for use with EVABarrier draft line. You will need either the 8mm x 6.5mm or 9.5mm x 6.5mm Duotight reducer to connect the EVABarrier to the Pluto. Kegland Part number: KL00956
$16.49
-
Pop Cultures | Sourdough Starter Kit
With the Pop Cultures Sourdough Starter Kit, you’ll have a healthy and active sourdough starter in just a few days! Then you’ll be ready to make incredible sourdough bread and so much more from your home. Love the taste of sourdough, but not sure where to start when it comes to making your own at home? Look no further, because the Pop Cultures Sourdough Starter kit is just what you need! The Pop Cultures Sourdough Starter kit gives you what you need to have a flavorful and healthy sourdough starter on your kitchen counter in 24–48 hours. Just add a little flour and water to the included dried sourdough starter culture, and bring to life a developed and resilient sourdough starter of your own! With easy-to-follow instructions, the entire process is made simple. And once you have a healthy, living sourdough starter of your own, you’re on the fast track to making incredible homemade sourdough bread, pizza dough, pancakes and waffles, and so much more! The Pop Cultures Sourdough Starter kit makes a great gift for the baker or bread lover in your life, or anyone that loves a new DIY project. Plus, it’s a great activity to do with friends and family. Discover • Create • Share • Enjoy Includes: 32 oz Jar Cloth Cover Pop Cultures Sourdough Starter Culture Stick-on Thermometer Easy to follow step-by-step instructions
$29.99
You have seen 48 out of 78 products