Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this item to you when we receive more in mid January.
Have a keg of beer, but want to fill some bottles to take with you to the game, beach, or friend's house? The BeerGun is a great way to fill bottles from a keg. Every part that comes into contact with your beer is stainless steel. This unit features a CO2 purge, which helps to prevent oxidation during filling. Includes tubing and a brush for cleaning.
The Version 2 BeerGun will soon become the standard for rapid handheld bottling. This new model features an ergonomic handle, with valve controls placed conveniently at your fingertips. This upgrade is easier to clean, and even easier to use. If you've used other bottlers, but been disappointed by confusing controls or foaming, then this is the Bottle Filler for you.
What's New:
Ergonomic warm-touch grip with ambidextrous thumb actuated CO2 valve
Positively retained beer gun seal tip - no more lost tips!
Anti-microbial beer hose keeps contamination at bay!
Accessory kit now included as standard item
Tool free super fast disassembly
Made in the USA!
Note: Regulators and "Y" fittings are not included with the product. You need two gas sources, so a dual output MFL regulator is ideal. You can add a second output to your regulator by adding a "Y" Fitting and 2 shutoffs. You can also cut your line and add a barbed "T" or use a manifold.
Absolutely EVERYTHING you need to start brewing!
The complete home brewery kit! Includes everything you need to brew 5 gallons of delicious beer at home!
High quality 5-gallon stainless steel kettle perfect for brewing
Fermonster brand brewing fermenter is clear so you see fermentation activity and eliminates the need to siphon with built-in spigot
Step-by-Step instruction pamphlet fine-tuned over 20 years for easy success
Your choice of recipe kit included
Make brewing fun and easy with our new Deluxe Homebrewing Starter Kit only from MoreBeer!. This beer brewing starter kit includes the nearly indestructible Fermonster fermenter, a five gallon stainless steel brewing kettle, an ingredient kit of your choice and all the time-tested equipment you need to brew up 5 gallons / 2 cases of beer per batch.
With the Deluxe Homebrew Starter Kit, you can choose from several recipes including the American Ale Hoppy Pale Ale, Irish Red Ale, I Heart IPA, and German Hefeweizen.
The Fermonster Fermenter - A Huge Upgrade Over Standard Buckets or Glass "Carboy" Water Bottles
Unlike buckets or glass carboys, the Fermonster fermenter was designed for brewing beer. It is made from tough, clear, virgin grade PET plastic so you can see the magic of fermentation. Unlike glass it will never break and shatter if dropped. It represents a huge upgrade over traditional buckets because these fermenters are much less likely to get scratched. Scratches can hold bacteria that can cause off flavors in the beer. The Fermonster comes with a built-in spigot that eliminates a long time issue in homebrewing of having to start a siphon to transfer your beer to the bottling bucket after fermentation is over. The large 4" lid allows for easily adding yeast, hops, or other additions. We also really love the molded-in level markers that tell you exactly when you have reached your desired volume.
Five Gallon Stainless Kettle - It's Bigger Than What You Have in Your Kitchen
Over the years we found that many brewers thought they had a big enough kettle. They would go home only to return and buy our five gallon stainless steel brewing kettle. To make brewing easy, we've discounted our five gallon brewing kettle to be able to include it from the start! Plus, because it is made of food-grade stainless steel, you don’t have to worry about any off flavors imparted by your boil kettle.
We Don't Skimp on Cleaning and Sanitizing
Proper cleaning and sanitizing is one of the core tenants of making great beer. Some starter kits utilize an all-in-one cleaner/sanitizer that does neither job well. We’ve included the best-selling sanitizer for brewing, Star San. We also include Craftmeister oxygen-based cleaning tablets that make cleaning your Fermonster Fermenter a breeze.
Other Upgrades That Make Brewing Easier
We’ve also made a few items standard that really make the brew day easier including a thermometer for temperature monitoring and a hydrometer with testing jar for measuring sugar levels. Our reusable mesh bags allow for the easy removal of spent grain and hops at the end of the boil. The included stainless spoon is a really nice upgrade over plastic when you are stirring boiling liquids.
Easy, How-To Instructions & an Actual 800#
We've taught hundreds of thousands of people how to brew in over 25 years. Our instructions are clear and simple to follow and will have you making great beer with batch number one. If you have any questions, call our on-staff brewmasters at 1-800-600-0033. In an age where 800-numbers and real customer service is going away, you can still call us and ask a question.
Recipe Options:
American Ale produces a light colored, hoppy Pale Ale that puts the beloved Cascade hop on full display. Cascade hops are one of the classic American hop varieties, and we love them for their citrus, grapefruit character.
Irish Red Ale is a genre-defying brew that continues to be one of our best-selling kits year after year. You'll love the deep, red color and distinct caramel flavor.
I Heart IPA was inspired by Bell's Two Hearted Ale, a universally adored IPA that features front-to-back hop additions of Centennial. Malt character takes a back seat to the pungent quality of citrus and lemon notes.
German Hefeweizen has a lovely blond color and distinct hazy appearance in the glass. This kit uses 100% Bavarian Wheat malt extract with just a dash of Northern Brewer hops for bittering.
This Kit Includes:
6 Gallon Fermonster fermenter with spigot, stopper and airlock
5 Gallon Stainless Steel Kettle
Food-Grade Bottling Bucket with spigot
Mesh Bags for steeping grain and hops on brew day
Thermometer for easy temperature management
Hydrometer for making key sugar readings
Transfer Tubing
Bottling Wand with shut off valve
Sturdy Bottle Capper
Bottle Caps
Bottle Cleaning Brush
Star San Sanitizer for true sanitization
Large Stainless Steel Spoon for mixing
Craftmeister Cleaning Tablets for easy cleaning
Your choice of recipe kit with yeast included
Everything You Need to Brew in One Box:
This kit includes everything you need to start brewing amazing beer at home, all in one easy to wrap box. With our simple to follow step-by-step instructions and included choice of a delicious recipe kit, you will be brewing up your first batch of beer in no time at all. Don't settle for less when picking your homebrewing kit, pick MoreBeer! because we give you More!
Fermonster Carboy - 6 gal. With Spigot:
The Ported Fermonster is a brand-new fermenter designed specifically for fermentation. MoreBeer! gave product feedback for over 2 years of development and we think they nailed the design. The large lid allows for easy filling and makes hop or oak additions a breeze. The smooth sides are fantastic for sanitization - no ribs or texture to collect yeast or bacteria. The punted bottom allows sediment to collect to the sides so that you can siphon liquid from the center. Because they are made from virgin PET plastic, they're nearly unbreakable and a lot safer than similar glass carboys. Also notice the conical top which reduces surface area if you plan to store beer or wine long term.
Five Gallon Stainless Steel Kettle:
Made of high-quality stainless steel that is anything but cheap. The 0.5-mm thick sides and bottom are more than thick enough for this amount of liquid, and the riveted stainless steel handles on the kettle’s body make it easy to carry, even when filled. This 5-gallon kettle can safely hold up to 3 gallons of wort while boiling, making it the perfect size for brewing right in your own home!
Great Customer Service Since 1995:
As avid homebrewers ourselves, we strive to help new brewers make great beer right from the first batch. We have knowledgeable homebrewers ready to help you 6 days a week (Mon-Sat) on our Customer Service team. Got a question? We are glad to answer it. Have a problem? Let us help you. We’ve built our business on great customer service since we started in 1995. We also offer a vast library of Articles & Videos on numerous homebrewing topics.
You will also need one of the following to bottle or keg your beer:
(48) 12 oz or (24) 22 oz cappable Beer Bottles or a Home Kegging System
Mill your own grains on brew day for increased freshness and higher efficiency!
Adjustable gap setting allows you to fine tune your preferred crush level and adapt to the kernel size of different malts
12 TPI knurl to efficiently pull grain through rollers while leaving hull intact to form an excellent filter bed for sparging
2 roller mills are great "first mills" for homebrewers expanding their brew kit. Economical and gets the job done!
Included crank handle can be detached to power the driven roller with an electric drill or motor
Mill your own grains for ultimate freshness with the MaltMuncher two roller grain mill. Includes a 6lb hopper, adjustable rollers, and hand crank. The handle can be removed to use the mill with a drill. The MaltMuncher is backed by a one year warranty and is built to last with rollers made from cold rolled steel, a big upgrade over most entry level mills. The body and hopper is made from 6061 grade aluminum. The optional PPE base board is much stronger than comparable particle board or plywood bases and makes for a secure platform to set on a bucket.
Do you love to build your own equipment? Make an amazing motorized mill with the optional MaltMuncher high torque motor designed to work with the MaltMuncher 2 roller and MaltMuncher 3 roller grain mills.
Features:
6 lb hopper and crank handle
Great for use with a power drill
Cold rolled steel rollers sized at 5" long by 1.25" diameter
Adjustable rollers at both ends to move the gap from .025" - 0.1"
If motorized we recommend 200 rpm
12 TPI knurl to effectively pull grain through the rollers while still leaving the hulls intact to later form an excellent filter during the sparge
10 mm crank shaft
KegLand Part Number: KL03254
Please note: This mill is designed for use with brewing grains only. It will not work for cracking whole kernel corn.
The ultimate plastic pressurized conical
A best seller for a reason! Tons of features at an incredible cost
Crystal Clear super smooth PET makes fermenting and cleaning super easy
3" Butterfly valve at bottom makes removing yeast/trub easy with the 600mL collection jar.
Pressurizable (with accessories) for fermentation and closed transfer to your keg
The Gen 3.2 FermZilla Tri-Conical features a newly designed collection container with top & bottom PCO1881 ports. The collection container has a 3" T.C. opening and installs on the Conical with a 3" T.C. butterfly valve. The molded 3" T.C. ferrule on the tank is a huge improvement over the Gen 2 model—eliminating the complicated dump valve design and simplifying the collection container connection. Brew with confidence on the new Tri-Clover FermZilla!
Out of the box, the FermZilla Conical is an amazing fermenter that will immediately step up your game on the cold side of the brewing process. But what we love most about this unit is how easily it is to upgrade as you go—adding more functionality and gaining more precise control over your fermentation with each new accessory. Below are some of our favorite add-ons for the FermZilla Tri-Conical Fermenter.
Pressure Kit
The FermZilla is the perfect option for brewers that want all the advantages of a conical fermenter without the price tag of a full blown stainless steel unit. It allows you to dump trub, harvest yeast, and with the addition of the FermZilla Pressure Kit, you can carbonate and serve – all in one vessel! The clear PET tank allows you to visually monitor fermentation activity and is pressure rated to 2.4 Bar (34.8 psi), which means you can ferment under pressure, reducing ester and fusel alcohols in your finished beer. This also gives the ability to perform pressure transfers. If you prefer to move your finished beer to a keg or other vessel, you can do so with little to no oxygen exposure.
Tri-Clamp Pressure Lid
Add a 2" T.C. port to your fermenter by replacing the standard lid with the FermZilla Tri-Clamp Pressure Lid. This will give you an opening to add dry hops or other additions without needing to remove the entire lid, or you can upgrade down the road with a Hop Bong sight glass in order to add CO2 and purge your hop charge of oxygen. PCO1881 threaded ports are still there for Ball Lock Caps, as well as undrilled ports for an optional Thermowell and Temp Twister cooling coil.
Hop Bong Pressure Pack
The ultimate upgrade kit! The Hop Bong Pressure Pack has all of the parts included with the Pressure Kit and Tri-Clamp Pressure Lid but fully parted out to remove the guess work. If the Tri-Conical is your first FermZilla fermenter, this accessory kit is for you. Load up the Hop Bong, flush it with CO2, purge out oxygen with the handy PRV on top, then simply open the Butterfly Valve to inject your beer with a 6 oz payload of dry hops.
FermZilla Gen 3 vs Gen 3.2:
3" x 3" T.C. butterfly dump valve
3" T.C. compatible collection container
600 mL collection container w/ top & bottom PCO1881 threaded ports
What's Included:
FermZilla 27L Tank with 3" T.C. Bottom Port
3" T.C. Butterfly Valve
600 mL Collection Container with 3" T.C. Connection
Stainless Steel Stand with Swing Handles
Stainless Steel Handle Assembly
Top Lid with PRV (35 psi)
3" tri-clamp with gaskets
3-Piece Airlock
Graduation Sticker
Adhesive Thermometer
Spare Seals
Specs:
27 L (7.1 gal) Total Volume
Pressure Rated to 2.4 Bar (34.8 psi)
Height in Stand - 29.5"
Height w/ Airlock - 33.7"
Tank Diameter - 13.9"
Diameter in Stand - 15.3"
Lid & Collection Container Ports - 28 mm PCO 1881 threads
Temperature Rating:
When not under pressure, do not expose to liquids above 131°F
When under pressure, do not expose to any temperatures above 95°F*
*Please note that the temperature rating for the FermZilla tank is lower when using it under pressure. When not under pressure, it is perfectly safe to transfer wort into the tank below 131°F or to use hot liquids below this temp for cleaning. When under pressure, make sure to keep your fermentation temperature below 95°F and keep the fermenter in an environment that is below 95°F ambient. This is especially important when fermenting with kveik yeast. These strains are known to ferment hot if no temperature control is being used. Exceeding the temperature rating may compromise the tank, leading to a shorter life span or sudden failure to maintain pressure. Even with proper use, we recommend replacing the tank every two years.
Please note: when using the FermZilla under pressure, you must perform a water pressure check to ensure your connections are leak proof. To do this, fill your FermZilla up with water, apply at least 15 psi pressure, and check for leaks around all caps and threads.
Pressure Stress
If you use the FermZilla to ferment under pressure, or you use CO2 to pressure transfer or force carbonate your finished beer, it is very important that you conduct semi-annual inspections of your tank. Even with perfect care, the FermZilla tank may show signs of wear from pressure stress over time. We recommend visually inspecting your tank for stress creases or other signs of wear once or twice a year. A hydro test should be conducted every two years, even if no signs of wear are found. The process is simple:
Fill the tank to the brim with water
Replace the Red PRV with a Green PRV rated to 4.5 BAR or higher
Pressurize the tank to 4 BAR (58 psi)
Check for leaks, then replace the Red PRV when finished
If leaks or potential points of failure are found, replace the tank before you continue using pressure with your FermZilla.
General Care
Taking good care of your FermZilla begins with cleaning and sanitizing the unit before and after use. The tank is made from food-grade PET, which is beautifully clear, but can be sensitive to long soaks in cleaners and acid-based sanitizers. In general, we do not recommend leaving products like PBW or StarSan soaking in the tank for more than an hour. Extended soaks have the potential to degrade the PET material and shorten the lifespan of the tank.
KegLand Part number: KL25898
NOTE: FermZilla tanks are marked with a manufacturer’s “expiry date”. This does not indicate that the tank is bad after this date; it simply indicates that a hydro test may be in order. 2 years after production and every 2 years after first use, it is recommended that the tank be hydro tested to ensure the tank is holding pressure. Hydro test instructions are available here. You will also need the D1072 Green PRV to perform the test. If you do not plan to pressurize the fermenter, the test is not necessary.
Quickly carbonate your beer using the same process most large commercial breweries use!
Beer is carbonated and ready to drink in less than an hour
Easy to clean and sanitize
No one likes waiting, and the QuickCarb keg carbonator by Blichmann Engineering is the way to eliminate the wait from carbonating your homebrew. This high-pressure co2-injection system from Blichmann Engineering™ will carbonate a keg in 30 minutes, with no chance of over carbonating your beer. All connectors are included, and the unit hangs from the front of your keg.
Use is simple, just sanitize the unit using the built in pump, and connect hoses to your Keg and CO2 system. Turn on the gas, plug in the unit, and 30-40 minutes later, your beer will be perfectly carbonated. Cleanup is just as easy, as you can run cleaner and sanitizer through the system using the pump as well.
All the crucial features of a top-shelf brew kettle at an incredible price!
These kettles are the perfect choice for new brewers leaving the kitchen stove and stepping up to the full boil brewing method
Made from stainless steel throughout which is easy-to-clean and offers a lifetime of reliable use
Two welded 1/2" ports for common threaded brewing accessories—ball valve and barb fitting are included for the bottom port
Internal volume markers make it easy to measure pre boil volume and post boil volume
Silicone grips made for comfortable, slip-free handling
If you’re searching for a fully featured brew kettle but don't want to break the bank, the Brewmaster 8.5 Gallon Stainless Brew Kettle will certainly do the trick. Made of 100 percent stainless steel and available for a truly amazing price, this reliable brew kettle is perfect for first-time brewers and experienced home brewers alike. Two ½-inch couplers are welded to the side of the kettle, and the bottom coupler can even be threaded on the inside of the kettle to use with a diverter or a kettle tube screen. These kettles are upgraded with Silicone Grip Handles and Stamped volume markers on the inside, making brew day that much easier.
Add an AG405 (domed false bottom) to this stainless brew kettle and you can even use it as a mash tun. Includes a ball valve and a threaded adpator to 3/8" barb for easily attaching transfer tubing. Also included is a thread 1/2" plug for the thermometer port. Thermometer is not included and can be added at any time.
Features:
8.5 Gallon Stainless Steel Brewmaster Brewing Kettle
Two Welded 1/2" Full Couplers allow for internal and external attachments
Stainless 1/2" Full Port Ball Valve & nipple included for bottom Coupler
Stainless 1/2" Plug included for top coupler
Stamped Volume Markers
Silicone Handle Grips
Internal Threading allows for conversion to Mash Tun or addition of whole hop filters
Internal Dimensions: 13.75" Tall x 13.75" Ø
1 mm thick walls
Made from 201 Stainless Steel
Approximate Internal Dimensions 13.75" tall 13.75" wide.
This item does not work with induction burners
A ball valve, nipple, and plug are included for the welded couplers. A thermometer, false bottom, or kettle screen can be added separately
New Kegs are trouble-free for years
Rubber top and bottoms protect floors from dings
Perfect laser welds ensure easy sanitation and reduced risk of contamination
Made in Italy by AEB, a long-time manufacturer with impeccable attention to detail
Ditch the bottles and start kegging today! Save time, reduce the risk of infection and get all those bottles out of the kitchen for good!
This brand new 5 gallon keg offers convenience, security and insurance when compared to used or reconditioned kegs. There's no need to replace gaskets or other parts, no need to trust that someone else did a good job with reconditioning, and no possibility of residual flavor or aromas getting into your beer!
We import these 5 gallon Cornelius Kegs from AEB Italy, a long-time manufacturer with impeccable attention to detail. Perfect laser welds ensure easy sanitation and reduced risk of contamination. While newer kegs shipped from China may have modern features, they do not provide perfect laser welds and therefore risk contamination over time. You'll be glad you paid a bit extra for this high-quality keg. Tack on our famous Fast & Free shipping and you've got a great quality keg at an amazing value!
Ball Lock Style Corny Keg
5 gallon capacity
9" Diam. x 25" Height
Maximum working pressure of 130 PSI.
Heavy-duty HDPE plastic fermentation and stoarge tank
Made from food-safe materials with extra thick walls to preserve the aroma of your beverage
Rotating plastic spigot eliminates the need to use an auto-siphon or racking arm to transfer liquid
Wide top port opening for easy cleaning
Airlock & stopper included
Made in Germany by Speidel
The future is here today, and the future is HDPE Fermentation & Storage Tanks from Speidel. Made in Germany from nothing but undyed and food-safe plastic, these tanks are produced with particularly thick walls which preserves the aroma and the alcohol for a markedly long time. The stable carrying handles have been tried and tested for decades and are extremely durable.
Are you tired of carboys? Hate siphoning to transfer? Wish you could ferment larger batches in a single container? Sick of lifting 50lbs by a small metal handle? Done with worrying about shattered glass, injury and lost product? Well then have we got the solution for you!
These heavy duty plastic tanks offer a fantastic fermentation & storage solution at a great price.
Key Features:
Heavy duty HDPE construction is durable and resists oxygen transfer. None of the risks of working with glass.
Small footprint and rectangular shape makes them easy to store - take better advantage of the space you have to dedicate to wine & beer making.
Built-in handles make these tanks easy to move, even when full.
Large lid opening makes them easy to clean by hand - say goodbye to your carboy brush!
All ports seal with gaskets and the vessel can be fully sealed for long-term storage.
Includes a spigot and oversized 2-piece Speidel airlock.
Designed and manufactured in Germany by Speidel, the makers of our legendary commercial wine tanks.
22"L x 16"W x 22" H, 8.82 lbs
FAQ:
Can filled containers be carried by the handles?
Depending on the weight—barrels up to 30L are no problem—60L is the limit and should not be carried when completely full. The handles have a weight capacity of 30kg (66 lbs).
Is there an upper limit on the alcohol content of the stored liquid?
In principle, there is not. However, it should be noted that the higher the alcohol content, the faster the seals and, to a lesser extent, the tank itself will wear out.
Up to what temperature can the containers be used?
For short periods of time the containers can withstand temperatures of up to 80°C (176°F). This temperature should not be exceeded. For longer periods of time the containers can be used at temperatures up to 60°C (140°F).
MoreBeer!'s Patent Pending sparge arm design is the perfect addition to almost any all grain setup! This sparge arm assembly is made completely of stainless steel and silicone, and has two adjustment points. One of these will help to hold the sparge arm against your kettle, while the other allows you to move the sparge arm up or down inside the kettle to accommodate different amounts of grain. These adjustment knobs are very easy to hand tighten and loosen, meaning no tools are necessary. Excellent for sparging as well as recirculating your mash in a RIMS or HERMS system!
To use, simply install on your kettle wall, tighten down the stopper bumper to hold the sparge arm in place, adjust the height of the bottom disc to be right above your grain bed but below the mash tun's water level, and adjust the flow level using the included ball valve. This unit will not include a barb or quick disconnect on the inlet of the ball valve, as every brewery is different. Please choose an inlet attachment from the sparge arms recommended items. Note - This sparge arm will not fit on most coolers. Make sure to check out the video in the video tab below.
Features
100% stainless and silicone construction
Two adjustment knobs make it extremely universal
Included ball valve allows you to increase or decrease the flow rate during sparge or recirculation
Included check ball will prevent back flow
Can adjust from the top of your kettle to 12-13 inches down into your kettle
A single, large diameter outlet port trickles onto a stainless disc, which distributes sparge water gently and evenly. This port is also much easier to flush out and keep clean than many other sparge assemblies with multiple small holes that grain gets stuck in during recirculation
Stainless tube measures 18.5" from the top to the bend, and 8.5" from the bottom to the center of the distribution disc.
Can be mounted on a lip that is up to 7/8" wide
Has a 1/2" FPT ball valve
No more spillovers! Set your desired volume and walk away
Automatically collect water while you tend to other tasks
Great for collecting brewing water or mixing your cleaning and sanitizing chemicals
Illuminated display in splash resistant housing
Integrated solenoid valve cuts off flow when your set volume is dispensed
1/2" BSP inlet and outlet work well with Duotight or Type A Camlock fittings
Unlike other hose timers that simply measure time, the Fill-O-Meter measures volume and will automatically turn off when the programmed volume of water is dispensed. Enter your desired volume of water, press Start, and tend to other brew day prep work. Install in-line with your water filter to automatically collect filtered strike water, or measure out how much water you need to mix with cleaning chemicals for a precise dilution ratio.
We recommend setting up the Fill-O-Meter with either Duotight fittings or Type A Camlocks. Thread tape will be required for the Camlock. Use sparingly as too much plumber's tape can damage the plastic thread. And it is very important to never overtighten!
Displays real time flow rate and volume (Liters/Min or Gallons/Min)
Accurately measures and controls volumes at flow rates from 1-30L/Min (0.26-7.9Gal/Min)
Never overfill or spillover again
Splash resistant housing
Great for filling tanks, brewing kettles, distilling gear, mixing liquid and many other applications
Integrated flow meter and solenoid valve
Illuminated display for usage in the evening
Integrated sound alarm
Easy 1/2" BSP Inlet and Outlet
Automatic failsafe - flow is stopped if the unit loses power
Important Notes:
DO NOT flow liquid the wrong direction, it will break the unit.
DO NOT overtighten fittings onto the 1/2" ports.
DO NOT exceed temperatures greater than 104°F (40°C) through the unit.
Specifications:
Flow Range: 1-30L per minute
Temperature Range: 32-104°F (0-40°C)
LCD: 3 inch back lit display
Housing Material: ABS
Input/Output threads: BSP 1/2"
Pressure Rating: 0-12bar (0-180psi)
Accuracy: +/- 5%
Please Note: Accuracy can be improved with stable flow. Repeated start/stop or variation in water supply can have negative effect on accuracy. If you are noticing innaccurate fill levels, see the instruction manual for calibration instructions.
KegLand Part Number: KL14694
Few materials are more durable or more attractive than stainless steel, which is exactly what sets this Stainless Steel Wort Chiller from MoreBeer! apart from similar chillers. This chiller is made from 50 feet of stainless steel tubing measuring 1/2 inch diameter.
Although stainless steel takes a little longer to cool your worth than comparable copper tubing, its advantage is that it won’t tarnish between uses. Stainless steel is also much more affordable than copper, which makes this an economical choice that won’t sacrifice quality or real-world effectiveness. This stainless steel wort chiller also contains a brass hose adapter for an even more attractive, high quality look and feel.
The Stainless Steel Wort Chiller 50’ x 1/2” from MoreBeer! is made entirely in the U.S.
Note: The inner bend on the coils have small indentations that are a natural result of the winding process used during manufacturing. As an upside, these do actually help turbulate the cooling water to eliminate laminar flow (helps increase the cooling capacity).
Product Specifications
50' Stainless tubing
Brass Hose Adaptor
12.75" diameter
12" to the top coil
23" to the bend to go over the lip of the kettle.
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory.
The Hop Bong is a versatile pressurizable tri-clamp accessory, capable of not only dry hopping oxygen purged hops into fermenters, but also as an inline carbonation/oxygenation accessory. Load up the Hop Bong, flush it with CO2, purge out oxygen with the handy PRV on top, then simply open the Butterfly Valve to inject your beer with a 6 oz payload of dry hops.
If you're an existing FermZilla Conical or All Rounder user and you already own the Pressure Kit with 2x Ball Lock Caps and floating dip tube, check out the Hop Bong Upgrade Kit.
The 3 Pieces of the Hop Bong Pressure Pack:
Pressure Kit
The Pressure Kit includes two Ball Lock Caps with the Floating Dip Tube and Filter Attachment. These pieces allow you to pressure transfer finished beer out of the fermenter into kegs or a bottling bucket, or you can carbonate and serve beer directly from the FermZilla.
Tri-Clamp Pressure Lid
Replacing the standard lid with the FermZilla Tri-Clamp Pressure Lid provides you with a 2" T.C. port at the top of your fermenter. This will give you an opening to add dry hops or other additions without needing to remove the entire lid. Take off the butterfly valve to add your yeast pitch, and when you're ready to add flavoring additions when fermentation is complete, drop them in oxygen-free via the Hop Bong. PCO1881 threaded ports are there for your Ball Lock Caps, as well as undrilled ports for an optional Thermowell and/or Temp Twister cooling coil.
Hop Bong
Load up the Hop Bong and add CO2 to purge your hop charge of oxygen. This kit comes with a third Ball Lock Cap to introduce CO2 directly to the Hop Bong, as well as a pull ring PRV to release pressure and purge oxygen. Once you've flushed your hop charge with CO2, open the butterfly valve to inject your beer with up to 6 oz of hop pellets.
Hop Pellet Capacity: 150–180g (5.2–6.3 oz)
Kit Includes:
FermZilla 2" T.C. Pressure Lid Starter Kit
2" Hop Bong
2" FermZilla Tri-Conical Butterfly Valve
Floating Dip Tube
Weighted Mesh Filter Attachment (KEG6571)
Red PRV & PCO1881 Cap Combo
Yellow Ball Lock Cap
(2) Red Ball Lock Caps
(2) 2" Tri-Clamps
(2) 2" Silicone T.C. Gaskets
KegLand Part Number: KB10897
Installation Note: For best performance, ensure there is not an excess amount of slack when the silicone dip tube is installed and shorten it if needed. With the floating dip tube installed on your empty FermZilla, you ideally want the dip tube to hang freely with just enough length for the end of the dup tube to touch the bottom of the tank.
Warning: Always depressurize your system COMPLETELY before removing fittings from your fermenter.
New Kegs are trouble-free for years
Rubber top and bottoms protect floors from dings
Perfect laser welds ensure easy sanitation and reduced risk of contamination
Made in Italy by AEB, a long-time manufacturer with impeccable attention to detail
Imagine this…. you’re out camping with friends, and one of your buddies says he would love to have a cold brew. Then just picture the looks on their faces as you pull your brand new Cornelius Keg out of your cooler, full of your rich home brew!
This 2.5 gallon corny keg is perfect for the serious home brewer who loves to brew ½ batches, or is just tight on kitchen space. It will fit pretty much anywhere from coolers to backpacks, in your keezer, or in your fridge.
You’ll love the rubber tops on these 2.5 gallon kegs because they have two handles and are easier to stack! It is versatile, travels well and just looks cool!
The quality of these Italian-made cornelius kegs is undeniable. They are welded by laser under inert gas which means there are no nooks or crannies where bacteria can hide. They may cost more than kegs made in China but the quality difference is a perfect batch versus a ruined one. Quality is important because your beer may sit in these kegs for months. If bacteria gets into a bad weld they are going to very hard to kill.
Key Features:
High quality Italian made ball-lock style kegs with rubber top and bottom
Kegs are 15" tall, x 8.25" diameter and weigh 7.5 pounds.
Max working pressure of 130 PSI.
Upgrade your home brewery with an innovative, Stainless Steel, 3.5 Gallon Brew Bucket™ Fermenter! Many have asked for a smaller BrewBucket, and that has been heard. The Brew Bucket mini is perfect for 2.5 gallon batches. With features similar to the original 7 gallon Brew Bucket, the Mini is a great way to do smaller batches. Whether you are interested in splitting a 5 gallon batch for experimenting, or just brew 2.5 gallons, the BrewBucket Mini is a great choice.
Featuring a conical bottom, 304 SS construction, a rotating racking arm valve, and stackable design, these are space saving feature rich fermenters that are easy and enjoyable to use.
We inspected and used the Brew Bucket™ and one of the most unique features that stood out is that the Brew Bucket can be stacked during fermentation, even with an airlock attached. We also like the conical bottom that allows trub to settle out in a concentrated space that minimizes the surface area of the trub that is in contact with your beer. The included Patent Pending Rotating Racking Valve is also a brilliantly simple design allowing you to rotate the racking arm inside the Brew Bucket down during fermentation to minimize trub, and later up to get clear beer when racking! Etched Volume Markers on the inside were super handy when filling.
The build quality is really amazing for the price. Welds are clean. The lid is strong and the spring loaded lid hatches are solid. The lid includes a removable, molded silicone gasket that ensures an airtight seal. We love an airtight seal so that we can be sure to see the airlock working. The welded on stainless handles make the BrewBucket fermentor super easy to move.
Features:
304 SS Food Grade Construction
Rotating Racking Arm & Valve (Patent Pending)
3.5 Gal Max Capacity (2.5 gal Batches)
40° Conical Bottom for Trub Trapping
Nests for Storage & Stacks for Ferment!
SS lid w/ Silicone Gasketed seal
Spring Loaded Lid Clamps for Airtight Lid Seal
Offset Airlock Hole includes Silicone Stopper
Gallon Markers inside for visual volume assessment
Stainless construction resists damage and is easy to clean
8.5" Bottom Width / 11" Top Width x 16" Height
Please note: the thermowell pictured in the second photo is not included.
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory.
The Hop Bong is a versatile pressurizable tri-clamp accessory, capable of not only dry hopping oxygen purged hops into fermenters, but also as an inline carbonation/oxygenation accessory.
This upgrade kit is for existing FermZilla Tri-Conical and All Rounder Fermenter users that already own the Plastic Pressure Kit with 2x Ball Lock Caps and Floating Dip Tube. If you already own these pieces, then you just need the two accessories below for a complete Hop Bong Pressure Pack.
Tri-Clamp Pressure Lid
Replacing the standard lid with the FermZilla Tri-Clamp Pressure Lid provides you with a 2" T.C. port at the top of your fermenter. This will give you an opening to add dry hops or other additions without needing to remove the entire lid. Take off the butterfly valve to add your yeast pitch, and when you're ready to add flavoring additions when fermentation is complete, drop them in oxygen-free via the Hop Bong. PCO1881 threaded ports are there for your Ball Lock Caps, as well as undrilled ports for an optional Thermowell and/or Temp Twister cooling coil.
Hop Bong
Load up the Hop Bong and add CO2 to purge your hop charge of oxygen. This kit comes with a Ball Lock Cap to introduce CO2 directly to the Hop Bong, as well as a pull ring PRV to release pressure and purge oxygen. Once you've flushed your hop charge with CO2, open the butterfly valve to inject your beer with up to 6 oz of hop pellets.
Hop Pellet Capacity: 150–180g (5.2–6.3 oz)
Kit Includes:
FermZilla 2" T.C. Pressure Lid Starter Kit
2" Hop Bong
2" FermZilla Tri-Conical Butterfly Valve
Red PRV & PCO1881 Cap Combo
Red Ball Lock Cap
(2) 2" Tri-Clamps
(2) 2" Silicone T.C. Gaskets
Does Not Include:
Yellow Ball Lock Cap
Secondary Red Ball Lock Cap
Floating Dip Tube with Filter Attachment
KegLand Part Number: KB10921
Warning: Always depressurize your system COMPLETELY before removing fittings from your fermenter.
The ultimate plastic pressurized conical
A best seller for a reason! Tons of features at an incredible price
Cyrstal clear super smooth PET makes fermenting and cleaning super easy
3" Butterfly valve at bottom makes removing yeast / trub easy with the 600mL collection jar
Pressurizable (with accessories) for fermentation and closed transfer to your keg
The Gen 3.2 FermZilla Tri-Conical features a newly designed collection container with top & bottom PCO1881 ports. The collection container has a 3" T.C. opening and installs on the Conical with a 3" T.C. butterfly valve. The molded 3" T.C. ferrule on the tank is a huge improvement over the Gen 2 model—eliminating the complicated dump valve design and simplifying the collection container connection. Brew with confidence on the new Tri-Clover FermZilla!
NOTE: The primary example photo shows the collection container from the Gen 3 FermZilla.
Out of the box, the FermZilla Conical is an amazing fermenter that will immediately step up your game on the cold side of the brewing process. But what we love most about this unit is how easily it is to upgrade as you go—adding more functionality and gaining more precise control over your fermentation with each new accessory. Below are some of our favorite add-ons for the FermZilla Tri-Conical Fermenter.
Pressure Kit
The FermZilla is the perfect option for brewers that want all the advantages of a conical fermenter without the price tag of a full blown stainless steel unit. It allows you to dump trub, harvest yeast, and with the addition of the FermZilla Pressure Kit, you can carbonate and serve – all in one vessel! The clear PET tank allows you to visually monitor fermentation activity and is pressure rated to 2.4 Bar (34.8 psi), which means you can ferment under pressure, reducing ester and fusel alcohols in your finished beer. This also gives the ability to perform pressure transfers. If you prefer to move your finished beer to a keg or other vessel, you can do so with little to no oxygen exposure.
Tri-Clamp Pressure Lid
Add a 2" T.C. port to your fermenter by replacing the standard lid with the FermZilla Tri-Clamp Pressure Lid. This will give you an opening to add dry hops or other additions without needing to remove the entire lid, or you can upgrade down the road with a Hop Bong sight glass in order to add CO2 and purge your hop charge of oxygen. PCO1881 threaded ports are still there for Ball Lock Caps, as well as undrilled ports for an optional Thermowell and Temp Twister cooling coil.
Hop Bong Pressure Pack
The ultimate upgrade kit! The Hop Bong Pressure Pack has all of the parts included with the Pressure Kit and Tri-Clamp Pressure Lid but fully parted out to remove the guess work. If the Tri-Conical is your first FermZilla fermenter, this accessory kit is for you. Load up the Hop Bong, flush it with CO2, purge out oxygen with the handy PRV on top, then simply open the Butterfly Valve to inject your beer with a 6 oz payload of dry hops.
FermZilla Gen 3 vs Gen 3.2:
3" x 3" T.C. butterfly dump valve
3" T.C. compatible collection container
600 mL collection container w/ top & bottom PCO1881 threaded ports
What's Included:
FermZilla 55L Tank with 3" T.C. Bottom Port
3" T.C. Butterfly Valve
600 mL Collection Container with 3" T.C. Connection
Stainless Steel Stand with Swing Handles
Stainless Steel Handle Assembly
Top Lid with PRV (35 psi)
3" tri-clamp with gaskets
3-Piece Airlock
Graduation Sticker
Adhesive Thermometer
Spare Seals
Specs:
55 L (13.2 gal) Total Volume
Pressure Rated to 2.4 Bar (34.8 psi)
Height in Stand - 41.5"
Height w/ Airlock - 45.1"
Tank Diameter - 13.9"
Diameter in Stand - 15.3"
Lid & Collection Container Ports - 28 mm PCO 1881 threads
Temperature Rating:
When not under pressure, do not expose to liquids above 131°F
When under pressure, do not expose to any temperatures above 95°F*
*Please note that the temperature rating for the FermZilla tank is lower when using it under pressure. When not under pressure, it is perfectly safe to transfer wort into the tank below 131°F or to use hot liquids below this temp for cleaning. When under pressure, make sure to keep your fermentation temperature below 95°F and keep the fermenter in an environment that is below 95°F ambient. This is especially important when fermenting with kveik yeast. These strains are known to ferment hot if no temperature control is being used. Exceeding the temperature rating may compromise the tank, leading to a shorter life span or sudden failure to maintain pressure. Even with proper use, we recommend replacing the tank every two years.
Please note: when using the FermZilla under pressure, you must perform a water pressure check to ensure your connections are leak proof. To do this, fill your FermZilla up with water, apply at least 15 psi pressure, and check for leaks around all caps and threads.
Pressure Stress
If you use the FermZilla to ferment under pressure, or you use CO2 to pressure transfer or force carbonate your finished beer, it is very important that you conduct semi-annual inspections of your tank. Even with perfect care, the FermZilla tank may show signs of wear from pressure stress over time. We recommend visually inspecting your tank for stress creases or other signs of wear once or twice a year. A hydro test should be conducted every two years, even if no signs of wear are found. The process is simple:
Fill the tank to the brim with water
Replace the Red PRV with a Green PRV rated to 4.5 BAR or higher
Pressurize the tank to 4 BAR (58 psi)
Check for leaks, then replace the Red PRV when finished
If leaks or potential points of failure are found, replace the tank before you continue using pressure with your FermZilla.
General Care
Taking good care of your FermZilla begins with cleaning and sanitizing the unit before and after use. The tank is made from food-grade PET, which is beautifully clear, but can be sensitive to long soaks in cleaners and acid-based sanitizers. In general, we do not recommend leaving products like PBW or StarSan soaking in the tank for more than an hour. Extended soaks have the potential to degrade the PET material and shorten the lifespan of the tank.
KegLand Part number: KL25904
NOTE: FermZilla tanks are marked with a manufacturer’s “expiry date”. This does not indicate that the tank is bad after this date; it simply indicates that a hydro test may be in order. 2 years after production and every 2 years after first use, it is recommended that the tank be hydro tested to ensure the tank is holding pressure. Hydro test instructions are available here. You will also need the D1072 Green PRV to perform the test. If you do not plan to pressurize the fermenter, the test is not necessary.
5-gallon Ball Lock Keg made from beverage-grade 304 stainless steel.
Ideal for beer, cider, kombucha, cold-brew coffee or any other beverage you want to serve on draft.
Single steel handle provides easy mobility while keeping the in & out posts clear for connection.
Rubber boot bottom won't scratch up the floor of your kitchen or home bar area.
Manufactured in an ISO 9001-certified facility with robotically welded seams for superior quality.
The KOMOS Homebrew keg is the perfect option for beer, cold brew coffee, kombucha, cider, or any other beverage you want to serve your home bar patrons on draft. These ball lock kegs are built in an ISO 9001-certified facility and made from beverage-grade 304 stainless steel with robotically welded seams. The single steel handle is positioned away from the ball lock posts, so you'll never have trouble connecting or routing your draft lines. The rubber boot bottom allows you to move your kegs around without fear of scratching up your floors, which is especially nice if your kegerator setup is on hardwood floors, and they can be stacked on top of other homebrew kegs with a rubber top. Comes with a standard corny keg lid with pull ring PRV, providing both manual and automatic pressure relief.
Specifications:
Max Pressure: 130 psi
PRV Rating: 85 psi
High Quality Laser Welded Seams
Single Ergonomic Steel Handle
Rubber Boot Bottom
ISO9001 Quality Assurance
NSF Approved
Made from 304 Stainless Steel
25.25" H x 8.75" D
Add dry hops without introducing oxygen to your fermenting or finished beer!
Load hops into the Hop Bong, fill it with CO2 via the ball lock cap, and pull the PRV to release oxygen
This is the perfect accessory to protect your finished beer from oxygen ingress when it's still in the fermenter
6 oz capacity per "hop drop"—easily repeat the process if you just gotta have More!
Compatible with all BrewBuilt X-Series fermenters and any stainless conical with 1.5" T.C. top port
The Hop Bong is a versatile pressurizable tri-clamp accessory that is perfect for purging oxygen from your dry hops before dropping them into your fermenter. Load up the Hop Bong, flush it with CO2, purge out oxygen with the handy PRV on top, then simply open the Butterfly Valve to inject your beer with a 6 oz payload of dry hops.
This kit is specifically adapted for use with the BrewBuilt X-Series conical fermenters and can be used with any stainless fermenter with 1.5" tri-clamp top port. The 2" T.C. Hop Bong attaches to a stainless 2" butterfly valve that then connects to a 2" x 1.5" T.C. reducer. This allows the largest capacity Hop Bong to be used with any of the 1.5" T.C. accessory ports on the BrewBuilt Conical's lid.
Hop Pellet Capacity: 150–180g (5.2–6.3 oz)
Kit Includes:
2" Hop Bong
Stainless Ball Lock Cap
Red PRV & PCO1881 Cap Combo
2" BrewBuilt Butterfly Valve
2" x 1.5" Tri-Clamp Reducer
(3) 2" Tri-Clamps
(3) 2" T.C. Gaskets
Warning: Always depressurize your system COMPLETELY before removing fittings from your fermenter.
Ss BrewTech has done it again, taking brewing equipment to an innovative next level. These are a premium lineup of feature rich all Stainless Steel Brew Kettles, designed to keep you brewing for a lifetime.
What really sets this boil kettle apart from the rest is the first ever integrated trub dam and pick-up tube assembly that Ss has designed into the back of the 304 Ss 1/2" ball valve (3pc). It is a brilliant little piece which will help with a more efficient whirlpool, leaving more trub in the kettle, and bringing more wort to the fermenter! Other features include robust triclad bottom, internal gallon markings, and strong riveted handles with molded silicone grips that can hang the lid.
Features:
Heavy duty 18 gauge 304 Stainless
1.2 x 1.0 height to width ratio
Triclad bottom - no scorching!
Internal etched gallon markings (starting at 1 gal!)
Thermometer port
High Quality Weldless Fittings
Robust riveted silicone handles for safety
Hang lid on side handles
Optional coupling for thermometer
Dimensions: 13.4" H x 11" W
5.5 Gallons total volume
Get to boil faster and increase boil vigor by retaining heat!
Manage steam by turning it back into liquid that can later be used for cleaning/sanitizing
Avoid the sticky residue that boiling wort can leave on your walls and ceiling
Reduce the power consumption during the boil with your BrewZilla or DigiBoil
Perfect accessory for indoor brewers! No need to install a special Range Hood to manage steam
Made with the apartment and basement brewer in mind, this steam condenser set made from high quality 304 stainless steel will help you manage steam and condensation during the boil. Assembles in minutes and can be used with the BrewZilla or DigiBoil with the proper Distillation Lid and 2" T.C. weldless bulkhead. This setup will reduce heat loss, meaning you'll get to boil faster and use less energy overall to maintain a rolling boil. When it's time to add hops, yeast nutrients, or other additions, simply remove the tri-clamp end cap and drop them in. (Use gloves, it will be hot!). With the new Pro Sight Glass Distillation Lid, the condenser can be attached directly to the 35L unit's 2" T.C. ferrule or to the 65L unit's 4" T.C. ferrule using a 4" x 2" T.C. reducer. The Pro Distillation Lid also features a 3" sight glass disc that can be removed to address foaming issues or to add hops or other boil additions.
If you've brewed indoors before, you're probably familiar with how sticky the evaporation coming off the boiling wort can be. The gummy layer of film it can leave behind on your painted walls and ceiling is no fun to clean up. And if you've been considering how to incorporate a range hood in your brewery to deal with the steam, now there's no need! Simply attach the Steam Condenser Set and run your kitchen tap or garden hose to the Duotight-compatible inlet. From the inlet, water will enter the column via a special spray head which can condense 0.42 gal (1.6 L) per minute while connected to 100 psi mains water. You'll find that a super-fast flow rate isn't necessary to cool boiling steam into liquid. Unlike the distillation process where the distillate needs to be under a certain temperature so that ethanol doesn't evaporate from the liquid at a high rate, with boiling wort you just need enough flow to form the steam back into liquid. Simple!
After the steam is reformed into liquid, it will drain out of the bottom barb where you can install 3/8" ID silicone tubing. Recapture that water in a collection vessel and save it for cleaning and sanitizing! Once again, be aware that the water coming out will be very hot.
Caution: You will need to remove the Steam Condenser when you reach boil to manage the hot break and ensure you don't have a boil over when you reach boiling temperatures. Once you've completed that step, you can reattach the Condenser and leave it in place for the remainder of the boil.
Warning: It is important that the output tube for this steam condenser is open to atmosphere. This will allow the condensed steam to exit freely.
DO NOT put a valve on the liquid output or restrict the condensed steam in any way as this may cause your brewery to develop vacuum and implode or explode.
DO NOT immerse the tube for the condensed steam in water. The outlet hose must be open to atmosphere and the drips of condensed steam must drip into your collection bucket freely.
You Will Also Need:
Tri-Clamp Distillation Lid
OR
Standard Distillation Lid for 35L or 65L BrewZilla / DigiBoil
With 2" T.C. Weldless Bulkhead (H707)
OR
Pro Distillation Lid for 35L or 65L BrewZilla / DigiBoil
35L Lid connects directly
65L Lid requires 4" x 2" TC Reducer
6.35 mm Monotight Adapter (or you can clamp directly to the inlet)
3/8" ID silicone tubing for the outlet
Heat resistant brewing gloves
Kit Includes:
5 x 2" Tri-Clamps
5 x 2" Tri-Clamp Silicone Seals
1 x 13.7" (340 mm) Long 2" T.C. Tee
1 x 7.8" (200 mm) Wide 2" T.C. Tee
1 x 2" T.C. End Cap
1 x 2" T.C. to 6.35 mm Duotight elbow cap with elongated spray head mister
1 x 2" T.C. x 0.47" (12 mm) Barb – Suitable for 3/8" (10 mm) ID Silicone tubing
Some of these fittings are not sold separately
NOTE: The kit does not include the Duotight adapter and garden hose QD shown in the example photo. The text in the photo showing the Duotight compatible inlet elbow states 6.5 mm; it is actually 6.35 mm.
KegLand Part Number: KL22842
All the crucial features of a top-shelf brew kettle at an incredible price!
Perfectly sized for 10 gallon batch brewers
Made from stainless steel throughout which is easy-to-clean and offers a lifetime of reliable use
Two welded 1/2" ports for common threaded brewing accessories—ball valve and barb fitting are included for the bottom port
Internal volume markers make it easy to measure pre boil volume and post boil volume
Silicone grips made for comfortable, slip-free handling
If you’re searching for a fully featured brew kettle but don't want to break the bank, the Brewmaster 14 Gallon Stainless Brew Kettle will certainly do the trick. Made of 100 percent stainless steel and available for a truly amazing price, this reliable brew kettle is perfect for first-time brewers and experienced home brewers alike. Two ½-inch couplers are welded to the side of the kettle, and the bottom coupler can even be threaded on the inside of the kettle to use with a diverter or a kettle tube screen. These kettles are upgraded with Silicone Grip Handles and Stamped volume markers on the inside, making brew day that much easier.
Includes a ball valve and a threaded adaptor to 3/8" barb for easily attaching transfer tubing. Also included is a threaded 1/2" plug for the thermometer port. Thermometer is not included and can be added at any time.
Features:
14 Gallon Stainless Steel Brewmaster Brewing Kettle
Two Welded 1/2" Full Couplers allow for internal and external attachments
Stainless 1/2" Full Port Ball Valve & nipple included for bottom Coupler
Stainless 1/2" Plug included for top coupler
Stamped Volume Markers
Silicone Handle Grips
Internal Threading allows for conversion to Mash Tun or addition of whole hop filters
1.2 mm thick walls
Made from 201 Stainless Steel
Approximate Dimensions 17.5" tall 16" wide, 1.2mm thick
This item does not work with induction burners
A ball valve, nipple, and plug are included for the welded couplers. A thermometer, false bottom, or kettle screen can be added separately
pH56 is a pocket pH meter with a lot of features. It has a resolution of 0.01 pH, a range of -2.00 to 16.00 pH, and an accuracy of 0.05 pH. It also reads temperature from 23.0 degrees F to 140 degrees F (-5.0-60 C), and has automatic temperature compensation. The unit is completely waterproof.
The pH56 has a stability indicator and hold function that freezes the display for easy and accurate recording. The large display also has graphic symbols to guide you through the operations. Calibration is made automatically in 1 or 2 points with memorized standard and NIST buffer sets. Auto power off saves battery power after non-use. The double-junction electrode can be replaced in a very fast and simple way! The modular design allows easy electrode and battery replacement.
Milwaukee Part Number: pH56
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory.
The Catalyst represents the future of fermentation simplicity. Easy to clean, transferless, this is a time-saving piece of equipment which you'll be surprised by the value of. Boasting a rich set of features, the Catalyst Fermentation System was designed for homebrewers, while keeping true to many pro brewing principles. Not only will the Catalyst Fermentation System save you time and energy, it will improve the quality of your beer!
The 45° Conical Fermentation Tank is made of a BPA free Medical Grade material, Tritan, which can withstand dishwasher cleaning and is incredibly resistant to scratches or other damage. The entire vessel is designed to withstand boiling temperatures, so wort can be transferred straight from your kettle to fermenter without cooling if necessary.
Thanks to the integrated dump valve, trub can be dumped, allowing for primary and secondary fermentations to take place in the same vessel. This reduces transfers and touches, not only reducing oxygenation of your beer, but also reducing the chance of contamination. Once fermentation is complete, you can bottle from the same system using the included tubing adapter for the dump valve.
Conical design forces yeast & trub down to the integrated harvester, reducing contact with your beer and improving flavor. Yeast harvesting is accomplished using the integrated oversized 3" Butterfly Dump Valve & commonly available mason jars.
When fermentation is complete, cleaning is even easier. The Tritan material used for the conical resists buildup, and since the entire lid lifts off, cleaning the conical is as simple as a quick rinse & wipe down.
We've found the Catalyst to be a solid piece of equipment that does the job of many pieces of brewery equipment. If you're looking for a fermenter that covers you from brew day to bottling, this is the unit for you!
Features:
6.5 Gal capacity
45° Conical angle
Oversized 3" buttefly dump valve
Silicone Gasketed lid for perfect fermenter seal
Uses common mason jars as yeast harvester
All steps on the cold side of brewing in one vessel: Primary, Seconday, Yeast Harvesting, Bottling.
Medical Grade BPA Free conical made of Tritan.
Includes:
6.5 Gallon Tank with Lid
Stand (Base, 2 Legs, 2 Support Beams, 8 Screws)
3” Proprietary Butterfly Valve
Bottling Attachment
Transfer Tubing
Tubing Clamp
Rubber Stopper
16 Oz. Wide Mouth Mason Jar
Allen Wrench
Perfect your Catalyst System with the Catalyst Tank Cover.
PLEASE NOTE: The supplier of this product has temporarily halted shipments to addresses within the state of California. If you are a CA resident, please note your order will not be fulfilled and will ultimately be canceled. We hope to have this issue resolved with the supplier as soon as possible.
The Grainfather Sparge Water Heater is a temperature-controlled unit that allows you to heat up to 6.6 gallons (25 L) of water making the brewing process even easier by having the right amount of sparge water heated to the right temperature ready at the time of sparge.
Start heating your sparge water when you begin the mash to ensure it is ready for when you need to sparge. Once water is at required temperature, it will hold that temperature until changed or turned off. Also comes with a sight glass, tap and heating lights.
Actual capacity from bottom to MAX level is 6.6 gal 25 liters (+/-0.5L).
110-120V~, 60Hz, 1500W (USA)
Single wall 304 ss material, brushed finish
One piece structure for easy cleaning
304 stainless steel lid with twisted lock for safety
Cool touch and robust lid handle and urn handles
Water gauge indication and stainless steel ball valve water tap
Two overheat protection
Concealed heating element
Control lights: heating and keep warm
ON/OFF switch
Maintenance base
With 45-110°C variable thermostat
The Blichmann HopRocket™ is a great tool for all hop-heads. Mainly used as a hop back, but has also been used inline in dispensing draft beer (Randal). The Hop Rocket can fit up to 3oz. of whole leaf hops to add that extra hop kick to any beer!
Pressure tight up to 40PSI!
Holds up to 3oz. of whole leaf hops
100% Stainless steel construction with silicone gaskets
No need to monitor the wort levels as it will not overflow
Fine filter with wiper seal sends very clear wort to your fermenter
Coarse filter and coned bottom inlet help prevent backup and wort channeling
Uses 1/2" NPT connections for a universal fit!
The BrewBuilt T.C. spunding valve will give you the highest level of accuracy when fermenting under pressure. Designed for use with the BrewBuilt X-Series Uni Conical Fermenter, the spunding valve attaches to the lid's 1.5" tri-clamp port where the blow off fitting is normally installed. It can also be used with any pressurizable stainless steel conical with 1.5" T.C. top ports. The polycarbonate cylinder that surrounds the spunding valve can be filled with water or sanitizer to keep your tank 100% sanitary throughout the fermentation process.
Adjustable from 0.3–14.5 psi
Made from 304 stainless steel
11.75" H x 4" Ø
For Your Safety: Never exceed the maximum rated working pressure of your vessel at any time during operation. The fixed-pressure PRV on your conical should always remain in place while using this spunding valve.
This new American White Oak barrel is made by hand and flamed to a medium toast. A small oak barrel is great for ageing your homebrew, homemade wine or spirits. The exterior is raw unvarnished wood, so take care to keep your barrel in tip top shape. The care guide below will give you instructions on to prepare the barrel for first time use, and also how to keep it hydrated and sealed.
Comes standard with a spring-loaded spigot for easy dispensing. An optional stainless steel spigot is also available.
Features:
5 L (1.32 gal)
American White Oak
Medium toast
Raw Exterior (Non-Varnished) for easier leak prevention techniques
Stainless Alloy Rings coated in a protective black coating
Food grade reinforced plastic screw in cork
Spring-loaded spigot for easier dispensing
Barrel Wax Block
Stand included
KegLand Part Number: KL04657
All the crucial features of a top-shelf brew kettle at an incredible price!
Perfectly sized for 15 gallon batch brewers
Made from stainless steel throughout which is easy-to-clean and offers a lifetime of reliable use
Two welded 1/2" ports for common threaded brewing accessories—ball valve and barb fitting are included for the bottom port
Internal volume markers make it easy to measure pre boil volume and post boil volume
Silicone grips made for comfortable, slip-free handling
If you’re searching for a fully featured brew kettle but don't want to break the bank, the Brewmaster 18.5 Gallon Stainless Brew Kettle will certainly do the trick. Made of 100 percent stainless steel and available for a truly amazing price, this reliable brew kettle is perfect for first-time brewers and experienced home brewers alike. Two ½-inch couplers are welded to the side of the kettle, and the bottom coupler can even be threaded on the inside of the kettle to use with a diverter or a kettle tube screen. These kettles are upgraded with Silicone Grip Handles and Stamped volume markers on the inside, making brew day that much easier.
Includes a ball valve and a threaded adpator to 3/8" barb for easily attaching transfer tubing. Also included is a thread 1/2" plug for the thermometer port. Thermometer is not included and can be added at any time.
Features:
18.5 Gallon Stainless Steel Brewmaster Brewing Kettle
Two Welded 1/2" Full Couplers allow for internal and external attachments
Stainless 1/2" Full Port Ball Valve & nipple included for bottom Coupler
Stainless 1/2" Plug included for top coupler
Stamped Volume Markers
Silicone Handle Grips
Internal Threading allows for conversion to Mash Tun or addition of whole hop filters
Internal Dimensions: 18" Tall x 17.75" Ø
Made from 201 Stainless Steel
Approximate Internal Dimensions 18" tall 17.75" wide. 1.2 mm thick walls
This item does not work with induction burners
A ball valve, nipple, and plug are included for the welded couplers. A thermometer, or kettle screen can be added separately
Beautiful stainless steel construction
Prime option for building your own draft box
High density insulation for excellent cold retention
Swinging rubber coated handles for easy carrying/loading
Locking lid
54 qt capacity
24.5" x 17" x 18"
Turn heads at your next cookout with the beautifully designed KOMOS Stainless Cooler. The gorgeous stainless steel construction is a classic look that never goes out of style and provides an indestructible exterior for a lifetime of use. Features high density insulation for excellent cold retention, stainless steel swinging handles with rubber grip, locking lid, and 54-quart capacity. The KOMOS Stainless Cooler is an ideal companion for camping trips, tailgaters, beach days, or wherever else you want to enjoy a cold, crispy beverage.
If you're designing your own jockey box, this stainless cooler will definitely make a statement. Let your draft box shine! We love this cooler paired with the KOMOS Slimline Cold Plate, which will allow you to chill the beverage you're serving while still having plenty of room to store other food and drinks.
Patented carbonation system automatically maintains freshness and optimal carbonation for weeks
Streamlined regulator cap allows you to choose high or low carbonation setting to match the beverage you're serving
Double wall stainless steel vacuum insulation keeps beverages cold all day
Durable powder coated finish and rubber footing provide extra protection against dents and scratches
3-position dispenser tap provides easy pouring and storing with locked, unlocked, and pour positions
Uses low cost, food-grade CO2 cartridges (not included)
The 64-ounce uKeg Go pressurizble growler from GrowlerWerks is the most convenient, most affordable, most "go anywhere" growler yet. Delivering the core freshness functionality of the original uKeg, in a vessel optimized for quenching thirsts on the go. Durable, lightweight, easy to use, and ready to rock!
Specs:
Color: Tungsten, also available in Chili (Red)
Capacity: 64 oz
Dimensions: 5.3in x 6.9in x 10.3in (135mm x 175mm x 260mm)
Weight: 2.8 lbs
Requires: one 8 gram food-grade CO2 cartridge per use available here
Contents: uKeg Go, manual, protective shipping bag, coupon for future CO2 purchase
The KOMOS Keg Filler FOB is designed by our in-house engineers to stop the flow of beer once a keg is full. With a sleak design, it is easy to clean and extremely versatile if you wish to reconfigure it for another task.
The KOMOS Keg FIller FOB is intended as an upgrade to our Four Station Manual Keg Filler and Single Station Manual Keg Filler.
Features:
Borosilicate Sight Glass
Beer Thread (5/8" BSP)
Easy to clean
Silicone Washers
Stainless Construction
Food Grade Check Ball
NOTE: Four Station Manual Keg Filler requires four Keg Filler FOBs
Use this analog unit to control the temperature of a refrigerator, freezer, or air conditioner. It enables you to ferment and store beer at correct temperatures when the ambient room temperature is too warm.
Your electrical cooling device plugs into this unit which plugs into the outlet. A remote sensor connected by a small capillary tube monitors temperatures. If the temperature rises above your set point, the cooling device is turned on.
The unit features a 4 degree swing to help extend the life of the cooling unit's compressor. For example, if you had it set at 68 degrees, it would turn on at 68 degrees and go to 64 degrees before turning off. The unit has the potential to regulate temperature from 20 to 80 degrees Fahrenheit.
The sensor tube can be inserted into a refrigerator or freezer, and still allows the door gasket to seal tight. Temperature Range of 20 to 80F.
This Johnson unit can handle 15 amps or 1725 watts at 115 volts AC.
Introducing the all new uKeg 64 pressurizable growler from Growler Werks. Made from double-layer, vacuum-insulated stainless steel, this mini keg will keep your beer fresh and cold anywhere. Fitted with a CO2 regulating cap and tap handle. Includes two 8g CO2 Cartridges, brass handle and integrated pressure gauge.
Features:
Adjustable CO2 regulator built into lid keeps beer carbonated. Silver dial on top allows you to adjust from 0-15 psi.
Built in tap allows you to easily pour beer any time you want and included tap lock prevents the flow of beer when you don't.
Mounted sight glass allows you to see how much beer you have left.
Durable Double-Wall Vacuum-insulated Stainless Steel keeps beer cold all day!
Uses food grade 8 gram CO2 cartridges.
6.8 in. wide x 10.6 in. tall
Patented carbonation system automatically maintains freshness and optimal carbonation for weeks
Streamlined regulator cap allows you to choose high or low carbonation setting to match the beverage you're serving
Double wall stainless steel vacuum insulation keeps beverages cold all day
Durable powder coated finish and rubber footing provide extra protection against dents and scratches
3-position dispenser tap provides easy pouring and storing with locked, unlocked, and pour positions
Uses low cost, food-grade CO2 cartridges (not included)
The 64-ounce uKeg Go pressurizble growler from GrowlerWerks is the most convenient, most affordable, most "go anywhere" growler yet. Delivering the core freshness functionality of the original uKeg, in a vessel optimized for quenching thirsts on the go. Durable, lightweight, easy to use, and ready to rock!
Specs:
Color: Chili (Red), also available in Tungsten
Capacity: 64 oz
Dimensions: 5.3in x 6.9in x 10.3in (135mm x 175mm x 260mm)
Weight: 2.8 lbs
Requires: one 8 gram food-grade CO2 cartridge per use available here
Contents: uKeg Go, manual, protective shipping bag, coupon for future CO2 purchase
This is the Cornical Keg only. For the Fermentation Kit check out BL279 or for the complete kit check out BL275.
The Cornical™ is a new, unique offering from Blichmann that allows you ferment and keg in the same vessel. Saving you on both time and labor. Built with sanitary stainless steel and rated up to 50 psi you can perform a no chill transfer and ferment under pressure.
It is made from two main pieces. The first is a modular keg with a removable base that makes cleaning fast and easy. The second part is a versatile conical bottom that clamps onto the keg and converts it into a pressure capable fermentor. With the upcoming addition of Spunding valve accessory you will be able to control pressure during fermentation. Allowing you to have even greater control over your fermentation profile. This modular design allows you to use the conical bottom to ferment another batch on a different keg while you carbonate and drink your first batch all in same fermentation vessel. Thus eliminating the kegging step and cutting down the risk of possibly introducing your beer to oxygen and bacteria.
Features:
Ferment, carbonate, and serve all from a single vessel
Sanitary sample valve with rotating racking arm
Keg can be used as a fermentor or a serving keg
Cleaning made easy with a removable bottom
1.5 in. butterfly dump valve
Rated up to 50 psi
Made from sanitary stainless steel
Note: The Cornical can be bought as a complete system (both Keg and Fermentation Kit) or you can buy a Keg or Fermentation Kit on their own.
PLEASE NOTE: The supplier of this product has temporarily halted shipments to addresses within the state of California. If you are a CA resident, please note your order will not be fulfilled and will ultimately be canceled. We hope to have this issue resolved with the supplier as soon as possible.
All the essential distilling equipment for making spirits with your Still Spirits Air Still
Take the guess work out of what you'll need for home distilling with this one easy-to-use kit
Includes required equipment including fermenter, carbon filter, hydrometer, and more
Distilling at home should be fun and easy. That's why we've packed all the beginner distilling essentials into one easy-to-use kit.
The Air Still Essentials Distillation Kit enables you to prepare and ferment your wash, collect distillate, dilute, filter, and flavor your neutral spirit with various Top Shelf Flavorings.
Kit Contains:
Equipment
12 L (3.2 US Gal) Fermenter with Stick-On Thermometer
Carbon Filter & Collection System
Mixing Spoon
Ceramic Boil Enhancers
Hydrometer
Alcometer and Test Tube
Wash Ingredients & Consumables
1 x sachet Pure Turbo Yeast Nutrient (78g)
1 x sachet Turbo Clear (65g)
1 x sachet Turbo Carbon (54g)
1 x sachet Pure Turbo Yeast (10g)
2 x 2.6 lb Dextrose
1.7 fl oz Distilling Conditioner
3 x 1.7 fl oz Top Shelf Flavorings
Note: The Air Still Essentials Distillation Kit does not include the Air Still or the Air Still Pro.
