Professional Draft Equipment

Transform Your Space into the Ultimate Home Taproom

Stop settling for bottles and cans. Experience the satisfaction of pouring brewery-quality draft beer directly from your own professional setup.

• Professional Grade Quality: Industrial-strength towers, faucets, and shanks designed for a lifetime of perfect pours.
• Universal Compatibility: Our conversion kits fit almost any refrigerator, making it easy to build your dream kegerator.
• Customizable Designs: Choose from sleek multi-tap towers and drip trays to match your bar’s aesthetic.
• Complete DIY Support: Everything you need in one place, from simple picnic setups to masterpiece towers.

Shop by collection

CO2 Tanks, Regulators & Parts

Draft System Cleaning Equipment

Draft Towers

Beer Line & Gas Tubing for Draft

Drip Trays

Duotight & EVABarrier

Jockey Boxes

Kegerator Conversion Kits

Kegerators

Taps, Faucets & Handles

Show previous products

• 

  KOMOS® | Stainless Beer Faucet Shank | 3 in. | Hex Nut & Barb

  1 review

  Stainless steel shank comes with a back nut, plastic collar, and a 3/16" tailpiece with hex nut and gasket. If desired, the barb can be removed and swapped for a different size or replaced with a Duotight x Beer Thread Adapter. This size of beer shank is a popular choice for building your own custom draft system. Typically installed in the door of a refrigerator or the wooden collar of a converted chest freezer. The shank’s listed size refers to the total length of threaded pipe. Approximately 1-1/8” are needed to account for the thickness of the finishing collar on the front and the space for the locknut on the back. Please take this into account when sizing the shank for your project. Installation Note: On a fridge there are generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling. Dimensions: 4-1/4" - Total Length (Tip to Tip) 3-1/8" - Shank Length (Without Nut & Nipple) 2-1/4" - Thread Length 1-3/4" - Pass Through Length 3/16" Nipple

  Read more less

  $21.99

• 

  Faucet Handle | Beer Tap Handle | Black Chrome Plated

  The perfect choice for your NukaTap Stealth Bomber or Punisher Edition draft faucet. These black chrome plated tap handles are an excellent upgrade for any kegerator setup. The heavy chrome plated brass will feel great in your hand every time you pour a tall one. 2-5/8" tall. 7/8" wide at the top of the knob. Kegland Part number: KL01373

  Read more less

  $7.69

• 

  Stainless Ball Valve for Couplers & Shanks

  1 review

  This ball valve with male and Female Beer Thread (5/8" BSP) is incredibly handy for those wanting to shut off flow of liquid and gas lines on keg couplers or shanks. Highly recommended if you are disconnecting your coupler and not re-attaching to another keg immediately. Made from 304 stainless steel. Kegland Part number: KL00406

  Read more less

  $27.49

• 

  KOMOS® Brushed Stainless Draft Tower Kit

  5 reviews

  Due to high demand, some of these items are currently out of stock but available for pre-order. Please check status notes below when selecting a size option to see if it is In Stock or tagged as PreBook. We will automatically ship this to you when we receive more inventory.   Nothing looks quite as nice as beer pouring out of a shiny stainless steel draft tower. These are the same tower kits included with the KOMOS Kegerator. Includes EVABarrier draft tubing and Duotight push-to-connect fittings for easy assembly. These towers can be purchased without faucets, or you can choose your preferred faucets from the add-on options above. The tower is made from 304 brushed stainless steel, making them corrosion resistant while also looking great! Duotight Fittings & EVABarrier Draft Tubing Duotight and EVABarrier have revolutionized how you connect draft line, and our tower kits come standard with both. We love Duotight push-in fittings for their quick connection, reliable seal, and versatility. Setting up and connecting draft line has never been easier -- no more hose clamps or heating water to soften tubing! Each tower comes with Duotight fittings for the tower shanks and for splitting gas lines (double & triple tap only). We recommend adding Duotight fittings to use for your keg connections as well. Depending on whether you'll be serving from homebrew kegs or commercial sanke kegs, you'll need two DUO106 or two DUO104 per line. EVABarrier tubing has been engineered with protection in mind and is both PVC-free and BPA-free. This double walled tubing offers superior protection against oxidation, CO2 loss, and microbial growth. EVA tubing is the future of draft line for professional applications, and now your kegerator will feature the same first-class tubing. Includes: Stainless steel draft tower Stainless steel faucet shank(s) with Duotight tailpieces EVABarrier gas and beverage tubing Draft tower mounting screws Faucet wrench 1-3 Tap Tower Dimensions: 13.4 in. tall (without faucets) 3 in. tower diameter 4.4 in. base diameter 4 Tap Tower Dimensions: 15.75 in. tall (without faucets) 4.5 in. tower diameter Interior mounting holes (does not include bottom collar)   Please note: Perlick Flow Control faucets are not compatible with the included Intertap tower shanks.  

  Read more less

  $69.99 - $139.99

• 

  Faucet Handle | Beer Tap Handle | Chrome Plated

  1 review

  These chrome plated tap handles are an excellent upgrade for any kegerator setup. So sleek! So shiny. The perfect mate for any chrome plated or stainless steel draft faucet. 2-5/8" tall. 7/8" wide at the top of the knob.   Kegland Part number: KL01373

  Read more less

  $6.59

• 

  Duotight Push-In Fitting - 8 mm (5/16 in.) x 3/8 in. BSP

  1 review

  This Duotight fitting with 3/8" male thread can be used to convert any female threaded 3/8" connection to Duotight. Comes with seated O-ring. Compatible with EVABarrier 8 mm OD Tubing (D1717 & D1718). Duotight fittings are high-quality push-in fittings that seal tight and offer superior sealing capacity due to the double O-ring sealing design. High Performance Double O-Ring Design: The secret to Duotight’s superior sealing performance comes from the fact that they use not one, but two high-quality EPDM O-rings. The double O-ring means they have literally twice the sealing surface when compared with other push-in fittings. This makes them more reliable and significantly reduces the chance of leakage. The double O-ring system also means that tubing can be bent at a much tighter radius without causing leaking issues, which can be an issue with other fittings. This combination of factors makes Duotight the most reliable push-in fittings on the market. EPDM offers excellent chemical resistance for a longer life span. When compared with silicone and vinyl, EPDM has much better gas transmission rates, better wear resistance, and is BPA-free. No Clamps Necessary! We recommend cutting your tubing straight, not on an angle, to ensure the line forms a complete seal. To remove the fitting simply push in the collet and the hose can be removed. Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Kegland Part number: KL18067

  Read more less

  $3.29

• 

  D-Style Keg Coupler | Sanke Keg Beer Tap | Stainless Steel Probe | PRV | Beer & Gas Barbs Included

  3 reviews

  D-Type keg coupler for standard American sanke kegs Stainless steel keg probe Click-to-engage ergo lever handle Includes 1/4" OD barbs for gas inlet and liquid outlet The most popular keg coupler in the USA. Commercial D-Style sanke beer tap, also called a coupler, has a lock down mechanism that gives a solid click when engaged. Heavy duty construction is designed to withstand commercial usage. Beer is dispensed out of the top port, the side port is for gas. Nickel coated body with stainless steel probe This is the default tap used by most American Craft breweries. Here is a partial list of breweries that have been reported to being using American D style kegs.  Abita ACME Alaskan Alexander Keith Anderson Valley Bad Frog BayHawk BBC Black Dog Blanche de Chambly Blue Moon Breckenridge Brooklyn Bruin Pale Ale Budweiser Busch Carlsburg Celis Cider Jack Columbia Brewing Coors Coors Light Corona Deschutes Black Butte Devil Mountain Dos Equis Eel River Brewing Ellicottville E.J. Phair Fat Tire Firehouse Firestone Flying Dog Foster's Full Sail Genesee George Killian's Irish Red Goose Island Gordon Biersch Grant's Green Mountain Cidery Hamms Hard Core Cider Henry Weinhard's High Falls Holy Cow Red Hornsby's Hudson Valley Humboldt Ice House Killarney Killian's Irish Red Kirin Ichiban Kokanee Labatt Blue Leinenkugel Little Kings Lost Coast Lowenbrau (US) Mad River Maudite Miami Trail Brewing Michael Shea's Michelob Mickey's Middle Ages Miller Milwaukee's Best Modelo Molson Canadian Moosehead Natural New Amsterdam New Zeland Steinlager Nor'Wester North Coast O'Doul's Old Milwaukee Old Vienna Pete's Portland Mactarnahan's Amber Portland Oregon Honey Pyramid Razors Edge Red Ale Red Dog Red Hook Red Wolf Rogue Dead Guy Ale Rogue Hazelnut Brown Rogue Red Rolling Rock Sam Adams Saranac Saxer Brewing Schmitt's Shiner Bock Ship Inn Shipyard Sierra Nevada Sleemans Southpaw Spanish Peaks Black Dog Starr Hill Brewery Steinlager Strohs Tecate Thomas Kemper Trois Pistoles Unibroue Wasatch Weinhard's Whitbread Ale Widmer Hefeweizen Woodchuck Dark & Dry Cider Wyder's Yuengling Zebra   Kegland Part number: KL06064

  Read more less

  $32.99

• 

  Gas Tubing Assembly - Ball Lock Quick Disconnect (QD) - 5/16 in.

  18 reviews

  You'll love the convenience of using this complete gas tubing assembly for draft beer dispensing. This Gas Tubing Assembly includes a ball lock gas-in quick disconnect fitting, 5 feet of 5/16" gas tubing, and two hose clamps. It's more convenient than having to hunt down all of the individual parts yourself. You'll find several places you can use this assembly in your homebrewing configuration.

  Read more less

  $14.99

• 

  Beer Faucet Shank | Stainless | 4" | Intertap® | NukaTap®

  16 reviews

  Comes with a back nut, plastic collar, hex nut, and a 1/4" barb. Requires a 1" hole saw for installation. When set in place, the shank will only have about 2 1/2" of length to pass through your wall or fridge door, due to the length of the collar and back nut. Installation note: On a fridge there is generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling. Dimensions: 5-1/8" - Total Length (Tip to Tip) 4" - Shank Length (Without Nut & Barb) 3" - Thread Length 2-1/2" - Pass Through Length Kegland Part number: KL01113

  Read more less

  $36.49

• 

  KOMOS® | Stainless Tailpiece Hex Nut | 4-Pack

  1" stainless steel hex nut. Used to attach a tailpiece barb to either a faucet shank or keg coupler. You will also need a tailpiece gasket to form a seal. See below for EPDM, Silicone, and Vinyl options. Female Beer Thread (5/8" BSP) 5/8" top port opening Comes in a convenient zip lock bag.

  Read more less

  $8.79

• 

  Duotight Draft Regulator Board | Gas Manifold | 6 Way

  Serve beverages at different pressures without the need for multiple CO2 cylinders, dual body regulators, or expensive gas manifolds Feed a single pressure to the gas board from your regulator and then step down the pressure on each Duotight regulator Use one line for serving ales, another for soda or seltzer water, and another for carbonating a freshly filled keg All parts shown are included and snap together quickly thanks to Duotight push-to-connect fittings and rigid plastic joiners Duotight In-Line Regulators feature built-in pressure gauges that read 0-60 PSI and can be swapped out for different ranges if desired The Duotight Draft Regulator Board is a simple and cost-effective solution to serving beer and other beverages on draft at different pressures. With a standard CO2 tank and CO2 regulator, you can feed gas at a single pressure into the regulator board and then fine tune individual pressure settings for each gas line via the Duotight In-Line Regulators. These regulators feature built-in pressure gauges that make adjustments super simple and check valves are included as standard so you never have to worry about back flow into the regulator. This kit includes everything you need to assemble your regulator board and can be customized so the gas inlet is on the right or left side—whichever makes the most sense for your home draft setup. Duotight push-to-connect fittings and the precut rigid joiners make assembly a breeze and only takes 10-15 minutes! The draft board kit comes in two options—with or without shut off valves. These valves offer peace of mind and allow you to shut off gas flow to any line that is not in use. If you ensure that your system has no leaks, they aren't technically needed, and you can always fully tighten your Duotight Regulator adjustment knob for added protection. But that little extra security might help you sleep easier at night! One advantage of choosing no check valves, however, is that it will leave room at the top of the board to label your gas lines. One of the coolest features of the Duotight In-Line Regulator is that the included pressure gauge can be swapped out for different pressure ranges. The standard gauge reads 0-60 PSI, but if you have one line that will always be used for serving Ales, you can swap to a 0-15 PSI gauge that will be a little easier to read and make precise adjustments. There's also a Digital Pressure Gauge available that provides backlit instant reads and is rated from 0-90 PSI. Don't need 6 gas lines? Check out the 4-Way Duotight Draft Regulator Board. Please Note: Full assembly required. The gas board, regulators, and fittings will arrive loose. Please see our instructions and assembly video below. Stepping Down Pressure The ideal regulation scenario occurs when the inline regulator steps down the output pressure to at least 10 PSI less than the inlet pressure. For example, if the inlet pressure is 30 PSI, the regulator effectively manages a range from 0–20 PSI on the output side ensuring optimal performance and stability. Ideal regulation scenario (10 PSI less than inlet pressure) Example of 30 PSI inlet translating to 0–20 PSI output Kit Includes: 6-Output Gas Board (6) Duotight In-Line Regulators (6) Duotight Check Valves (6) Duotight Shut Off Valves (if selected above) (5) Duotight Tees (1) Duotight Elbow (23) Rigid Plastic Joiners NOTE: All Duotight fittings and rigid plastic joiners come as 8mm OD. Mounting hardware is included for the regulators but not for mounting the board itself to a wall or the inside of your kegerator/keezer. If you select the option without shutoff valves, you will be left with some spare joiners after assembly.

  Read more less

  $142.99 - $153.99

• 

  Shutoff With Check Valve | 1/4" MPT x 1/4" MFL

  3 reviews

  This shutoff valve can be used for multiple applications. Has a 1/4 in MPT thread on one side, this is commonly used in regulators, air distributors, and other keg system components. The out side has a 1/4 in MFL fitting for attaching a variety of flare fitting such as a barb ans swivel nut for gas lines. Includes a check valve, so gas can only flow in one direction, this can protect your regulator from accidential back up of beer.

  Read more less

  $15.49

• 

  Ultra Barrier™ PVC Free Beer Tubing - 5/16 in.

  EJ Beverage Ultra Barrier™ tubing from EJ Beverage is constructed of a unique compound that provides for an excellent alternative to PVC.  Advantages to this unique tubing are: PVC Free and BPA Free - containes no DEHP phthalates or other plasticizers Environmentally friendly production - does not emit dioxins Proven to have no significant impact on taste or flavor Extremely low extractables/leachables High flexibility Remains flexible at lower temperatures Ultra-low permeability Superior Barrier properties Temperature range of -40 to 125° F Working pressure of 52 psi Use this size for gas line applications. Also used for long draw beer lines over 25'. Technical Specifications: 5/16" line provides .40 lbs of restriction per foot. Ideally pounds of resistance should equal pounds of applied pressure. 5/16" line holds 1/2 of an ounce per foot. PVC Free.  

  Read more less

  $10.49 - $143.99

• 

  KOMOS® | CO2 Regulator Gasket | Fiber Washer | 4-Pack

  This compression style fiber washers are a must if you use regulator that requires a gasket change everytime you change the tank. Comes in a convenient zip lock bag. NOTE: These are not intended for use with the KOMOS CO2 Regulator. For the correct KOMOS Regulator replacement gasket, please see D1089.

  Read more less

  $1.69

• 

  Reinforced Vinyl Tubing | 5/8" ID

  Our reinforced vinyl tubing is an excellent option for transfering liquids under 158°F that require some pressure resistance. A common application for the reinforced vinyl tubing is the in & out lines to your wort chiller.  This tubing is 5/8" inner diameter, is approved to 158°F, and can handle working pressures up to 200 PSI. Reinforced vinyl tubing. FDA & 3-A Sanitary certified for beverage and dairy processing. Inner Diameter (ID): 5/8" (15.9mm) Outer Diameter (OD): 0.89" (22.6mm) Working Pressure: 200 PSI Weight: 0.16 lbs/ft  

  Read more less

  $9.99 - $399.99

• 

  Duotight Push-In Bulkhead - 8 mm (5/16 in.) x 1/4 in. BSP

  3 reviews

  This Duotight Bulkhead is the same one used for installing the Thermowell into the lid of the FermZilla. Allows you to add a bulkhead to just about anything that can then be connected to with EVABarrier 8 mm OD Tubing (D1717 / D1718) or 5/16" OD stainless or copper tubing. Duotight fittings are high-quality push-in fittings that seal tight and offer superior sealing capacity due to the double O-ring sealing design. High Performance Double O-Ring Design: The secret to Duotight’s superior sealing performance comes from the fact that they use not one, but two high-quality EPDM O-rings. The double O-ring means they have literally twice the sealing surface when compared with other push-in fittings. This makes them more reliable and significantly reduces the chance of leakage. The double O-ring system also means that tubing can be bent at a much tighter radius without causing leaking issues, which can be an issue with other fittings. This combination of factors makes Duotight the most reliable push-in fittings on the market. EPDM offers excellent chemical resistance for a longer life span. When compared with silicone and vinyl, EPDM has much better gas transmission rates, better wear resistance, and is BPA-free. No Clamps Necessary! We recommend cutting your tubing straight, not on an angle, to ensure the line forms a complete seal. To remove the fitting simply push in the collet and the hose can be removed. Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. KegLand Part Number: KL14595

  Read more less

  $4.99

• 

  Duotight Push-In Fitting - 9.5 mm (3/8 in.) x 1/2 in. BSP Ball Valve

  2 reviews

  This Duotight ball valve with 1/2" male thread is perfect for attaching to the water input on the Copper Counterflow Chiller (WC130), allowing you to adjust the waterflow while chilling your wort. Compatible with EVABarrier 9.5 mm OD tubing (D1719). Duotight fittings are high-quality push-in fittings that seal tight and offer superior sealing capacity due to the double O-ring sealing design. High Performance Double O-Ring Design: The secret to Duotight’s superior sealing performance comes from the fact that they use not one, but two high-quality EPDM O-rings. The double O-ring means they have literally twice the sealing surface when compared with other push-in fittings. This makes them more reliable and significantly reduces the chance of leakage. The double O-ring system also means that tubing can be bent at a much tighter radius without causing leaking issues, which can be an issue with other fittings. This combination of factors makes Duotight the most reliable push-in fittings on the market. EPDM offers excellent chemical resistance for a longer life span. When compared with silicone and vinyl, EPDM has much better gas transmission rates, better wear resistance, and is BPA-free. No Clamps Necessary! We recommend cutting your tubing straight, not on an angle, to ensure the line forms a complete seal. To remove the fitting simply push in the collet and the hose can be removed. Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Kegland Part number: KL07375

  Read more less

  $4.99

• 

  Vinyl Beverage Tubing | Rigid | Draft Line | 5/16 in. ID | 9/16 in. OD

  Thick wall vinyl (PVC) tubing for gas and beer lines in keg systems. 5/16 in ID is the most common size used in commercial beer dispensing.  

  Read more less

  $4.89 - $79.99

• 

  Taprite Dual Body CO2 Regulator | High Performance Primary Regulator | Independent Pressure Settings | 0-50 PSI Working Pressure | CGA320 Inlet | One Way Shutoff Valves | 5/16" Barb Outlets

  28 reviews

  High performance primary regulator designed to handle the workload of dispensing from multiple taps without freezing up! Dual body regulator for setting independent pressure settings—ideal for serving two different beer styles with different optimum carbonation levels High-pressure and double low-pressure gauges to easily reference CO2 cylinder pressure and the two output pressures Pressure settings are easily adjusted by hand using the large plastic adjustment knob CGA320 inlet features a built-in gasket where the unit attaches to the CO2 tank—eliminating the need of replacing fiber washers with each tank swap Made in the USA. Taprite is one of leading manufacturers of gas regulators and draft dispensing equipment One-way shutoff valve outlets protect your regulator from backflow and can be turned on/off to stop gas flow without needing to close your tank When it comes to CO2 regulators, we’ve tried them all. This quality unit by Taprite is our favorite on the market. It’s no wonder this regulator is trusted by so many breweries and beer bars—it represents the best quality at a great price. This dual-body model allows you to send different pressures to two separate kegs from the same CO2 tank! The things you’ll love about this regulator are:  The large front knobs make pressure adjustment tool-free, easy & fast.  A built-in gasket where the regulator connects to the CO2 tank eliminates the constant replacement of fiber washers every time you change out your tank.  The barbed outlets feature one-way on/off valves which prevent backflow and protect the regulator’s internals.  The gauges are easy to read. The low pressure gauges read from 0 to 60 psi. The optional available gauge cage is the best on the market. This is the T752HP model, where the HP stands for high performance; it won't freeze up when multiple taps are running at once. Best of all is the consistent pressure regulation. With many regulators the pressure can 'creep' up over time. This unit holds the pressure rock steady. No drifting. Built by Taprite, an American company. 

  Read more less

  $179.99

• 

  NukaTap® Beer Faucet Parts | Replacement Ball Seal | Cup Washer Seal

  Single replacemelt ball seal (cup seal) for NukaTap draft faucets. Component #3 in the faucet diagram below. Each NukaTap has two of these washers. Also compatible with Intertap brand faucets. Not compatible with the NukaTap Mini faucet.   How to tell what generation NukaTap you have. Generation 1 - Two White Nylon Cup Seal Washers Generation 2 - Two Red Self Lubricating Nylon Cup Seal Washers Generation 3 - Two Black POK Cup Seal Washers   KegLand Part Number: KL43908

  Read more less

  $1.49

• 

  Vinyl Beverage Tubing | Rigid | Draft Line | 3/8 in. ID | 5/8 in. OD

  Use for long draw systems and as an entry line to a draft box. Technical Specifications: 3/8" line provides .20 lbs of restriction per foot. Ideally pounds of resistance should equal pounds of applied pressure. 3/8" line holds 3/4 of an ounce per foot. Made from PVC. Outer diameter of tubing is approximately 5/8"  

  Read more less

  $2.19 - $76.99

• 

  CO2 Regulator Stem O-Ring (2 Pack)

  4 reviews

  Silicone regulator stem o-ring. For regulators such as the D1060 & D1065, which have an o-ring located where the regulator stem mates with the CO2 cylinder. Pack of 2.

  Read more less

  $3.99

• 

  NukaTap® Stainless Steel Beer Faucet | Matte Black Finish | Stealth Bomber Edition | Forward Sealing

  16 reviews

  Reduced first pour foam due to low thermal mass Forward-sealing design prevents beer residue from gumming up the faucet Unique shuttle design greatly improves laminar flow, improving the pour of carbonated beverages Compatible with all Intertap faucet accessories and shanks Matte Black painted finish. See note below. First Pour Foam Reduction Every kegerator owner knows the letdown of pouring your first pint of the day and getting too much foam. Even with perfectly balanced draft lines, first pour foam is sometimes unavoidable simply due to the temperature of the faucet itself. Running beer through the faucet will drop the temperature, and the foaming will subside, but not without a bit of wasted beer from pouring off excess head. The NukaTap Stealth Bomber beer faucet drops to beer serving temperature much faster thanks to its lower thermal mass. Simply put, the bulkier the faucet is, the more beer is needed to flow through and chill the tap. The NukaTap is over 20% lighter than its Intertap predecessor, and even lighter still compared to other brands of faucets. Improved Laminar Flow The inspiration for the NukaTap name comes from its uniquely designed "nuke-shaped" shuttle that resides on the inside of the faucet. The NukaShuttle went through numerous rounds of redesigns and countless hours of testing to find a shape that provides superior laminar flow. This means that liquid passes by the shuttle with very little resistance, allowing highly carbonated beers or hard seltzers to pour like a dream. Sanitary Design The NukaShuttle is the world’s first seamless single-piece design. Traditional taps feature an o-ring seated on a stainless steel shuttle, which can cause a couple of issues. After many pours, the stainless shuttle rubbing against the internal body of the faucet will create small fissures that become potential infection sites, and the seated o-ring can be difficult to clean in place, making your draft cleaning and sanitizing process less effective than you realize. The NukaShuttle is an advanced TPV rubber matrix that has been seamlessly formed over a durable PP skeleton. This single-piece design eliminates the pitfalls of older manufacturing methods, making it one of the most sanitary faucets on the market. Forward Sealing vs. Rear Sealing From tap rooms to home bars, forward-sealing faucets are the ideal choice for any draft setup. In traditional rear-sealing taps, beer will drain out of the entire faucet when it's in the closed position. This means the internal mechanism is coated in beer, which then dries and becomes a sticky residue. Forward-sealing faucets, on the other hand, keep the tap full of beer so it never has a chance to dry and gunk up the internal parts. This makes the faucet much easier to clean and also reduces the chance of off flavors transferring to your beer while you pour. Faucet body & lever made from stainless steel Shuttle made from TPV O-rings made from EPDM Lever collar & friction bonnet made from brass Matte black finish NSF approved Kegland Part Number: KL17978 Please note: this is a painted faucet and as such needs to be used, cleaned, and handled with care. Clean the faucet gently by hand and avoid tossing it into a bucket with other draft parts. Excessive soaking in caustic cleaners will damage the finish. For these reasons, we do not recommend the Stealth Bomber faucets for professional settings. If you prefer a stainless steel spout that can take more punishment, see the NukaTap Punisher Edition faucet.

  Read more less

  $40.49

• 

  Vinyl Beverage Tubing | Rigid | Draft Line | 3/16 in. ID | 7/16 in. OD

  Thick wall vinyl (PVC) tubing for gas and beer lines in keg systems. 3/16 in inside diameter (ID) tubing is sometimes used for beer dispensing lines, where the smaller diameter provides more restriction and can reduce foaming.  

  Read more less

  $4.29 - $51.99

• 

  Replacement Pressure Relief Spring - 20 PSI

  20 PSI replacement spring for pressure relief valves.  All SS, works with our D1830, as well as a replacement for our Counter Pressure Bottle Fillers.

  Read more less

  $3.59

• 

  KOMOS® | Keg Coupler Replacement Seal Kit | D-Style | S-Style

  Replacement gaskets and o-rings for standard US keg couplers (D-Style) and European keg couplers (S-Style). Other than the probe washer, they use the same gaskets and check valves.

  Read more less

  $8.79

• 

  Drip Tray - 15.7 in. Wall Mount

  5 reviews

  Stainless steel drip tray with pre-punched wall mounting holes. 15.5" wide with 5" tall backsplash. The grill is removable for easy cleaning. Perfect for 4–5 faucets. Specs: Back splash: 5" tall Grill: 15.5" W x 6.625" D Overall width: 15.8" Overall depth: 6.75" Removable grill Made from stainless steel   KegLand Part number: KL01397    

  Read more less

  $65.99

• 

  Duotight Push-In Fitting - 9.5 mm (3/8 in.) Check Valve

  This Duotight check valve is a great idea for protecting your regulator. It has a low opening pressure of 1 psi. This check valve is suitable for clean liquids such as water or for gas. Since it cannot be disassembled for cleaning, we do not recommend it for beverage applications. The internal components are made from stainless steel. Compatible with EVABarrier 9.5 mm OD tubing (D1719). Duotight fittings are high-quality push-in fittings that seal tight and offer superior sealing capacity due to the double O-ring sealing design. High Performance Double O-Ring Design: The secret to Duotight’s superior sealing performance comes from the fact that they use not one, but two high-quality EPDM O-rings. The double O-ring means they have literally twice the sealing surface when compared with other push-in fittings. This makes them more reliable and significantly reduces the chance of leakage. The double O-ring system also means that tubing can be bent at a much tighter radius without causing leaking issues, which can be an issue with other fittings. This combination of factors makes Duotight the most reliable push-in fittings on the market. EPDM offers excellent chemical resistance for a longer life span. When compared with silicone and vinyl, EPDM has much better gas transmission rates, better wear resistance, and is BPA-free. No Clamps Necessary! We recommend cutting your tubing straight, not on an angle, to ensure the line forms a complete seal. To remove the fitting simply push in the collet and the hose can be removed. Compatible with EVABarrier 9.5 mm OD tubing (D1719). This Duotight check valve is a great idea for protecting your regulator. It has a low opening pressure of 1 psi, and since it cannot be opened or taken apart, it is recommended for gas applications only. The internal components are made from stainless steel. Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & water applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Kegland Part number: KL07498

  Read more less

  $8.79

• 

  KegLand Stainless Steel Draft Coil | Square Coil | 2 Lines

  These coils offer a sturdy, compact solution for custom jockey box builds The square-shaped coils hug the cooler walls, maximizing internal space for additional beverages Pair with the optional retention brackets to secure the coils in place, even when dumping out ice slurry after use Equipped with 8mm Duotight Adapters for easy connection to EVABarrier tubing The square shaped draft coils offer a unique and useful coil option for those building their own jockey box. These coils will hug the sides of your cooler walls and can be secured in place with optional retention brackets, allowing you to easily dump out your ice slurry after use without the internals of the jockey box spilling out. The square shape also leaves plenty of space within your cooler to pack extra canned and bottled beverages in the ice. Includes 8mm Duotight Adapters on the coil ends for use with 8mm OD EVABarrier tubing. Or the adapters can be removed so you can use the coil with your preferred 1/4" or 5/16" ID tubing. If you're looking for a pre-assembled option, these coils are featured in the KegLand 4-Tap Jockey Box. Specs: 2 Draft Lines Line Length: 45.9 ft. (14m) Coil Dimensions: 11" L x 9" W x 9.5" H KegLand Part Number: KL40087

  Read more less

  $87.99

• 

  CMBecker In-Line Flow Control Compensator

  13 reviews

  Add the perfect amount of restriction to any beer line to reduce foam. Eliminates the need for flow control in the faucet itself. Great for use in Jockey Boxes or anywhere you are serving beverages with varying levels of carbonation.    If you are currently using a long length of tubing to increase restriction you can now shorten your tubing. A shorter line holds less beer. Beer that is stored in the line tends to warm up quicker, adding to foaming issues, and is more likely to stale from bacteria present in the line.    Features: Adjust flow with an included Allen wrench (keeps unauthorized people from adjusting the unit) Eliminate foam from beer or slow down / speed up other beverages Fix systems with issues without having to replace lines or faucets Take the guesswork out of line restriction.  You can use shorter lines and still have perfect restriction.  You can also use larger ID lines and adjust as necessary. Easy to disassemble for cleaning, clear body for easy monitoring Made in Germany by CM Becker from Food grade plastic and stainless steel parts! Comes Equipped with 2 x 3/16" Barbs Easy to install to any existing beer line (cut line and install two clamps)

  Read more less

  $54.99

• 

  NukaTap® Mini Beer Faucet | Wall Mount Shank Kit | 8 mm Duotight

  2 reviews

  Designed specifically for mounting the NukaTap Mini Beer Faucet on any kegerator, keezer, cold room wall, or other flat surface Connect beer line directly to the faucet, reducing the amount of temperature loss to a standard draft shank No spinning faucets. Your tap will remain in a fixed orientation once locked into the collet Easy installation. No need to drill a large hole through your fridge to accommodate a standard 5/8" draft shank Use with 8 mm OD EVABarrier draft tubing Note: Faucet Sold Separately This shank kit is specifically designed to suit the NukaTap Mini Beer Faucet and will allow you to connect the NukaTap Mini to a cooler box, kegerator, keg fridge, cold room wall or any other flat surface. This wall mount shank kit is for use with 8 mm OD EVABarrier. For the shank kit for use with 6.35 mm OD EVABarrier, see here. New Innovative Shank Design Unlike other shank kits, this kit doesn't use a bulky 5/8" threaded shank. The issue with a standard draft shank is that acts as a heat sink, and due to the fact that most shanks sit inside an insulated wall, this results in a substantial amount of warm beer coming out of the tap before cold beer starts flowing. This results in substantial "first pour foam" effect which wastes beer, can result in sour beer, and ultimately negatively effects the quality of the beverages being served. This new design has the beer line feed all the way directly up to the back of the faucet, greatly reducing the volume of non-refrigerated beer. No Spinning Shanks If you have ever installed a traditional 5/8" long shank, you will know how frustrating it is when you use the faucet and it starts rotating. This new design of shank alternative uses three screws that lock the tap into a fixed position and prevents the taps from rotating. If you loosen the 1/2" stainless tap collet you can still have the flexibility to rotate the faucet to any orientation, but once the collet is tight, interlocking teeth on this shank kit and the NukaTap Mini will hold the tap permanently in the correct orientation. Easy Installation Another advantage compared to standard shanks is that this kit doesn't require you to drill a large 3/4"-1" hole through the wall. As no shank is required, only a hole large enough to accommodate the beer line is required. As a result, an 8mm (5/16") conventional drill bit is all that is necessary for installation. However, if you are concerned about the small amount of beer sitting in the draft line inside the wall not being refrigerated, you can also shell out a larger diameter of foam on the inside of the wall to allow cold air to circulate around the beer line thus reducing the non-refrigerated beer in the line even more. If you wanted to do this the Step Drill Bit is the best tool for the job. Any Wall Thickness Other shank kits will require you to purchase a specific length shank for a specific wall thickness. This new shank alternative will fit any wall thickness. If you have wall thicknesses that are less than 2.7" thick then you can use the included screws that have "snap off" points so you can simply cut the screws down to the desired length. However, if the wall is thicker than 2.7" you can simply purchase a conventional screw from the hardware store and screw the shank kit to your wall. If the substrate is firm enough you may not even need to go all the way through the wall so a common 1-1/4" long screw may be all that is required. Specifications: Beer Line Diameter: 8 mm OD EVABarrier Collet and Screw Cover: 304 Grade Stainless Steel O-ring Material: Dual O-ring Silicone/EPDM combination Plastic Mounting: Polyketone (POK) Temperature Range: 14-212°F (-10-100°C) Max Pressure: 150 psi KegLand Part Number: KL32186

  Read more less

  $21.99

• 

  Duotight Push-In Fitting - 9.5 mm (3/8 in.) Ball Valve

  This Duotight ball valve can be used as an inline shut off valve on beverage lines. Compatible with EVABarrier 9.5 mm OD tubing (D1719). Duotight fittings are high-quality push-in fittings that seal tight and offer superior sealing capacity due to the double O-ring sealing design. High Performance Double O-Ring Design: The secret to Duotight’s superior sealing performance comes from the fact that they use not one, but two high-quality EPDM O-rings. The double O-ring means they have literally twice the sealing surface when compared with other push-in fittings. This makes them more reliable and significantly reduces the chance of leakage. The double O-ring system also means that tubing can be bent at a much tighter radius without causing leaking issues, which can be an issue with other fittings. This combination of factors makes Duotight the most reliable push-in fittings on the market. EPDM offers excellent chemical resistance for a longer life span. When compared with silicone and vinyl, EPDM has much better gas transmission rates, better wear resistance, and is BPA-free. No Clamps Necessary! We recommend cutting your tubing straight, not on an angle, to ensure the line forms a complete seal. To remove the fitting simply push in the collet and the hose can be removed. Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Kegland Part number: KL07474

  Read more less

  $4.99

• 

  Gauge Cage | For Taprite Regulator | Mounting Bolt & Washer Included

  23 reviews

  Protect your regulator from damage in the event your tank gets knocked over. A Gauge Cage is cheap insurance that can help save you a costly regulator replacement. Mounting bolt and washer included. CO2 and Nitrogen tanks, especially the 5lb size most brewers use, are notoriously wobbly and easy to knock over once the regulator is mounted on them. This handy Gauge Cage helps protect the gauges themselves, as well as the fragile points where they thread into the regulator body, from damage in case of a fall.   Specifically sized to fit our D1060 and D1070 Taprite brand ragulators, these cages may not fit some budget regulators manufactured overseas.  

  Read more less

  $27.99

• 

  Short Faucet Handle | Low Profile Beer Tap Handle | Rounded Black Plastic

  7 reviews

  Black plastic rounded tap handle. 2" Tall x 1-1/4" Top Diameter x 13/16" Bottom Diameter Kegland Part number: KL01366

  Read more less

  $3.29

• 

  Gas Tubing Assembly - Ball Lock Quick Disconnect (QD) - 1/4 in.

  Includes ball lock gas-in quick disconnect (barb), 5 ft of 1/4" ID tubing, and two hose clamps.

  Read more less

  $14.99

• 

  Pressure Gauge (LHT) | High Pressure (0-3000 PSI) | CO2 or Nitrogen Regulator | 1/4" MPT Left-Hand Thread

  8 reviews

  Great Replacement for a broken gauge.   Replacing a broken gauge on your pressure regulator is a snap with this Left Hand Thread 3000 psi Replacement Pressure Gauge for CO2 or Nitrogen regulator. Installation is simple, and it prevents you from needing to buy a whole new regulator.    Used to determine level of remaining gas in the tank.   1/4” MPT Left-hand thread.

  Read more less

  $16.99

• 

  Stainless Steel Growler Filler - Fits Perlick 630SS & 650SS

  3 reviews

  Take your beer on the go with the help of this handy growler filler attachment for Perlick 630SS and 650SS faucets. Filling growlers straight from the tap is tough task, and you're more than likely to lose most of the beer's carbonation in the process. By running a short line of 3/8" tubing from the growler filler to the bottom of your growler, the beer can flow gently into the vessel and fill from the bottom up. Be sure to use the flow control knob to slow down the flow rate. If you're using the standard faucet, you may want to turn down the PSI on your regulator before filling.  

  Read more less

  $10.99

• 

  Monotight Push-In Fitting - 6.35 mm (1/4 in.) Ball Valve

  This Monotight ball valve can be used as an inline shut off valve on draft lines. Compatible with EVABarrier 6.35 mm OD Tubing. Monotight brings the same superior quality as Duotight push-in fittings but more appropriately sized for applications including water treatment equipment, water filters, reverse osmosis fittings, and more. In addition, they are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Kegland Part number: KL21951

  Read more less

  $2.19

• 

  Monotight Push-In Fitting - 8 mm (5/16 in.) x 1/2 in. BSP

  Connect EVABarrier tubing to 1/2" female threads with this Monotight adapter. Compatible with EVABarrier 8 mm OD Tubing (D1717 & D1718). Monotight brings the same superior quality as Duotight push-in fittings but more appropriately sized for applications including water treatment equipment, water filters, reverse osmosis fittings, and more. In addition, they are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Kegland Part number: KL14601

  Read more less

  $2.99

• 

  CO2 Cartridge - 74 g

  4 reviews

  These cartridges give the oomph to your mini-regulator dispensing unit! Perfect for dispensing your beer on the go. For use with the Torpedo Mini CO2 Regulator (KEG965A). One canister will push between 1-4 Cornelius kegs, depending on how it is used and the CO2 consumption required. 5/8-18 threading. Please note: due to air shipping restrictions, this product is only eligible for ground shipment within the contiguous United States.

  Read more less

  $18.49

• 

  Corny Keg Rinser | Ball Lock Quick Disconnect (QD)

  21 reviews

  Rinse out your ball lock corny keg without disassembling the keg posts and dip tubes Connect to your garden hose spigot and flush with water with the keg upside down Quick and convenient way to wash out residue from a spent keg before it hardens An inexpensive, time-saving assembly for rinsing out your Ball Lock kegs. You've just finished a keg of your homebrew. Most of us set that keg aside and clean it later when we brew up the next batch. As it sits it gets harder to clean and then we definitely have to disassemble the entire keg to scrub all the parts.  Well for years our Metal Shop Manager and lead Product Designer, Darren Schleth, has been using a simple keg cleaner in our R&D brewery to rinse his kegs, while upside down, through the body connects.  The keg is instantly rinsed while all the residue is still soft.  The keg can then later be soaked with PBW and/or sanitized without having to remove the body connects or poppets.  This saves lots of time. As employees at MoreBeer! saw this simple assembly everybody wanted one of their own.  To use: Connect the brass garden hose attachment to a garden hose. Then connect the grey and black quick disconnects to the inlet and outlet body connects on your Ball Lock keg.  Remove the lid and  turn the keg upside down. Turn on the water. Water risnes through both the inlet and outlet dip tubes completely rinsing the inside of the keg.

  Read more less

  $23.99

• 

  NukaTap® Mini Beer Faucet | Duotight Adapter | 8 mm (5/16")

  This Duotight 8 mm (5/16") adapter is designed to suit the Nukatap Mini and will allow you to couple the faucet to a wide range of other 8 mm Duotight fittings. This includes attaching it to the Duotight Flow Control Ball Lock Disconnect. This particular type of flow control ball lock disconnect includes a "tang" at the top of the push in fitting that couples with this adapter. The combination of the two fittings prevents the faucet from spinning around while in use. Sold Separately: NukaTap Mini Beer Faucet (D1598) Flow Control Ball Lock Disconnect (DUO159) Mini Self Closing Spring (D1598A) KegLand Part Number: KL32209

  Read more less

  $7.69

• 

  Vinyl Beverage Tubing | Rigid | Draft Line | 1/4 in. ID | 1/2 in. OD

  Thick wall vinyl (PVC) tubing for gas and beer lines in keg systems. 1/4 in inside diameter (ID) tubing is standard for homebrew keg systems for both the gas and the beer lines.  

  Read more less

  $6.09 - $72.49

• 

  KOMOS® Stainless Draft Tower With Intertap® Faucets (w/ Duotight Fittings)

  Due to high demand, some of these items are currently out of stock but available for pre-order. Please check status notes below when selecting a size option to see if it is In Stock or tagged as PreBook. We will automatically ship this to you when we receive more inventory.   Nothing looks quite as nice as beer pouring out of a shiny stainless steel draft tower. These are the same tower kits included with every KOMOS Kegerator, featuring Intertap stainless steel faucets, EVABarrier draft tubing, and Duotight push-to-connect fittings for easy assembly. The tower is made from 304 brushed stainless steel, making them corrosion resistant while also looking great! Stainless Intertap Faucets and Towers These kits come with Intertap faucets mounted on a brushed stainless tower. Intertap faucets are the newest, most advanced, forward sealing, beer faucets on the market today and will work perfectly for years. Forward-sealing means that while in the closed position the faucet will keep beer inside the body instead of draining out. This keeps the internal parts from getting sticky and reduces the chance of off flavors transferring to your beer while you pour. Intertap faucets feature a modular, threaded spout that can fit a variety of attachments including a growler filler or stout spout. Duotight Fittings & EVABarrier Draft Tubing Duotight and EVABarrier have revolutionized how you connect draft line, and our tower kits come standard with both. We love Duotight push-in fittings for their quick connection, reliable seal, and versatility. Setting up and connecting draft line has never been easier -- no more hose clamps or heating water to soften tubing! Each tower comes with Duotight fittings for the tower shanks and for splitting gas lines (double & triple tap only). We recommend adding Duotight fittings to use for your keg connections as well. Depending on whether you'll be serving from homebrew kegs or commercial sanke kegs, you'll need two DUO106 or two DUO104 per line. EVABarrier tubing has been engineered with protection in mind and is both PVC-free and BPA-free. This double walled tubing offers superior protection against oxidation, CO2 loss, and microbial growth. EVA tubing is the future of draft line for professional applications, and now your kegerator will feature the same first-class tubing. Includes: Stainless steel draft tower Intertap faucet(s) Stainless steel faucet shank(s) with Duotight tailpieces EVABarrier gas and beverage tubing Beverage line measures 4mm ID x 8mm OD Gas line measures 5mm ID x 8mm OD Draft tower mounting screws Faucet wrench 1-3 Tap Tower Dimensions: 13.4 in. tall (without faucets) 3 in. tower diameter 4.4 in. base diameter 4 Tap Tower Dimensions: 16 in. tall (without faucets) 4.5 in. tower diameter Interior mounting holes (does not include bottom collar)  

  Read more less

  $126.99 - $274.99

• 

  Gas Manifold - 5/16 in. (Brass)

  152 reviews

  Manifolds allow you to have one CO2 tank with multiple lines. Each line can be turned off individually without affecting flow to other kegs. Each ball valve contains a check valve that ensures no beer or gas can flow between the two kegs. The barbs are all 5/16", standard for gas line in the beer industry.

  Read more less

  $32.99 - $76.99

• 

  Ss Brewtech Keg WaSsher

  25 reviews

  Another great invention coming out of Ss Brewtech, the Keg WaSsher! This is a hands free, clean in place keg washer that will make cleaning kegs one of the easiest steps of the brewing process. Gone are the days of disassembling your keg to clean it. The cleaning process is pretty simple. Just take the keg lid off, attach the keg washer, attach both ball lock QDs, stick the whole thing upside down in a bucket full of sanitizer, turn on the pump and your keg is clean. The Keg WaSsher is designed to fit in a standard 5 gallon bucket. It also only uses 2 gallons of cleaning solution resulting in less chemical waste and evironmental impact. If you want to get fancy, you can set up a wash station with 3 buckets to perform an initial cleaning, fresh water rinse, and sanitizer. All you have to do is lift the whole apparatus from one bucket to the next! Features: Hands free operation Chemical resistant submersible pump Attaches to common ball-lock Cornelius-style kegs w/ removable lids Powerful CIP spray ball Entire assembly fits in 5-gallon bucket Cleans inside of keg and ports simultaneously Easily attaches/detaches from kegs Perform clean, rinse, and sanitize steps all with the same unit

  Read more less

  $249.95

• 

  Ultra Barrier™ PVC Free Beer Tubing - 3/8 in.

  EJ Beverage Ultra Barrier™ tubing from EJ Beverage is constructed of a unique compound that provides for an excellent alternative to PVC.  Advantages to this unique tubing are: PVC Free and BPA Free - containes no DEHP phthalates or other plasticizers Environmentally friendly production - does not emit dioxins Proven to have no significant impact on taste or flavor Extremely low extractables/leachables High flexibility Remains flexible at lower temperatures Ultra-low permeability Superior Barrier properties Temperature range of -40 to 125° F Working pressure of 35 psi Use for long draw systems and as an entry line to a draft box. Technical Specifications: 3/8" line provides .20 lbs of restriction per foot. Ideally pounds of resistance should equal pounds of applied pressure. 3/8" line holds 3/4 of an ounce per foot. PVC Free.  

  Read more less

  $11.49 - $166.49

• 

  Stainless Steel Tailpiece - 1/2 in.

  Tailpieces are fittings which connect beer and gas tubing to the different parts of a draft system. One side of the tailpiece features a barb to connect the tubing to, and the other side is held against the tap or faucet shank with collar nut.   Tailpieces are available in a range of barb sizes to fit up to your tubing size.   304 stainless steel construction means these pieces won’t rust or harbor bacteria that can ruin the taste of your beer.  

  Read more less

  $4.19

Show more products