Connected and it works! No comments from me!

Well made. I like the one way valves so beer cannot get past them when a keg goes dry. This is basically a one time expense and worth it.

These things are almost awesome, one manifold suffered damaged knobs during shipping. If they had metal knobs, these things would be totally awesome. It is hard to see in the photos, the plastic tabs that extend down to limit the turn broke off.

Best manifold we ever used. Easily expandable when needed.

worked fo my new keg set up. Had no leaks andall tubing worked great to size on unit.

Works great and at a good price. Every thread was sealed with Teflon or internal O-ring so no leaks.

Works great no leaks

I bought the 4 way manifold a year back, and it worked great. Until one day I came home to an empty CO2 tank. After doing a leak test I discovered cracks in two of the assemblies. After removing the cracked ones and installing a replacement one, a crack developed in a third one. The fittings are made from solid brass, but the main T body is made from a lesser quality type of brass.

Nice manifold. Seems more sturdy than the swing handle ones I replaced. No leaks and love having 6 lines.

Arrived leak free and ready for business. Now I have room for five corny kegs and bottle filler. If I want a different carbonation level I will just prime with sugar.

Basic setup but works great. No leaks! I would totally buy this again! Simple but exactly what I need.

I first bought the 2-way manifold and quickly realized I needed to upgrade to 3 and drilled another hole in my fridge for a third tap. I use this in conjunction with a few sets of: 'Beer & Gas Tubing Quick Disconnect - In-line W/ Shut-off'. It's great, I can swiftly connect and dispense any number of kegs up to three with a single tank as long as they're dispensed with the same pressure, which so far hasn't been an issue.It's solid & heavy, leak free, compact and does the job.

I have two sets ganged together for beers at the same carb level and a single set for lower carb beers.

I use this in my frig to divert CO2 to all my Cornies. I then bought two more and added them to the existing four for a total of six. AWESOME... six cornies full of beer and the CO2 valves make it easy to keep the brew bubblely.

Tested for leaks before using, but none were found. Works great!

I have two of these manifolds and they work great! I've never had a problem with leaks.

I got this product back in 2012, and now in 2014 is working great! BUT, when I first got it, it leaked a lot. Had to submerge the whole unit, take it apart, and reassemble some pieces with teflon tape. I overtightened one piece and cracked one of the T's. I also wouldn't put a lot of faith in the check valves. I don't know how much pressure it takes to push back through one, but I have inadvertently pushed beer through the manifold. It probably slowed the rate down a bit, but it was still a huge cross contaminated mess. I've also noticed certain valves are at a very annoying resonance frequency with the gas, making an incredibly loud whine when first connecting a keg or force carbonating.That being said, it works good, and is very easy to see which lines are on or off. It also looks quite awesome in my Keezer!

Bought this with the intention of using in a keezer, which was just completed earlier this year. Have never had any leaks. Use the last CO2 out for our counter pressure bottle filler since there are only 5 taps

This is a great manifold for the price. But, make sure you check it for tightness. I installed mine right out of the box and was losing CO2 because one of the nipples wasn't tightly connected to the bottom of the T.

I'm not locked into a certain configuration. I can add or subtract from it. Comes in handy!

The parts did need a little tightening, but nothing complicated. With a few seconds of wrench work, this thing is great.

Very good product works great

No leaks, valves still turn fine, good quality!

Purchased this to limit flavor transfer between my kegs and have been pleased with performance. Construction seems sturdy and have had no leaks although I have only had this on my system for a few months now.

Very happy great quality

I don't know how the check valves should function but when I connect a new keg (0 psi), gas and sometimes liquid is sucked up through the other lines that are connected. I now close the other valves when connecting a new keg and this of course solves the problem.

I hooked this up inside my kegerator and have 2 air lines going to the kegs and one line set up for my counter pressure bottle filler. Sweet!

I just bought these manifold for use in my new 3 kegs system, its really good, becouse you can split up the gas conectors, being a affordable choice.

Using it for 2 years now in converted fridge.Added splitter to 1 line and use it for my 3 kegs.

i'm sure there are cheaper options i could jerry rig myself if i wanted to, but i never knew how much i would be switching gas lines to my 3 kegs on and off. this makes it super easy and i'm confident these will always hold a gas-tight seal when off.

Bought these a year ago, no issues yet

It doesn't leak it does what it's supposed to. I have the 6-way and the 4-way. I just started using my 6-way, but had the 4-way for over a year without leaks are any other problems.

Bough this for my 7cf kezzer. Works great!