Detecting your location...
Draft Beer Dispensing Equipment - Better Category Framework
Professional Draft Equipment

Transform Your Space into the Ultimate Home Taproom

Stop settling for bottles and cans. Experience the satisfaction of pouring brewery-quality draft beer directly from your own professional setup.

  • Professional Grade Quality: Industrial-strength towers, faucets, and shanks designed for a lifetime of perfect pours.
  • Universal Compatibility: Our conversion kits fit almost any refrigerator, making it easy to build your dream kegerator.
  • Customizable Designs: Choose from sleek multi-tap towers and drip trays to match your bar’s aesthetic.
  • Complete DIY Support: Everything you need in one place, from simple picnic setups to masterpiece towers.
MoreBeer Kegerator and Kegs Setup
Shop by collection
464 products

  • Intertap Seal Kit for Standard Faucet

    Seal & Gasket Kit for Intertap® Beer Faucet

    5 reviews

    Replacement gaskets and o-rings for the Intertap SS and PC faucets Does not work with Intertap FC faucets or NukaTap faucets. Kegland Part number: KL01168

    $5.49

  • Double Ended Ball Lock Keg Post Jumper - Liquid to Liquid Double Ended Ball Lock Keg Post Jumper - Liquid to Liquid

    Double Ended Ball Lock Keg Post Jumper | Liquid to Liquid

    Clean multiple beverage draft lines in a single loop using this Ball Lock Keg Jumper Post. Makes cleaning your kegerator or keezer a breeze without the need to remove your quick disconnects. This double ended keg post does not have a spring & poppet. It just has a piece of bar that activates the ball lock disconnect wide open. Please note it is a single piece that cannot be undone from the middle. KegLand Part Number: KL20152

    $7.69

  • Duotight - 8mm (5/16) x 9.5mm (3/8) Reducer Duotight - 8mm (5/16) x 9.5mm (3/8) Reducer

    Duotight Push-In Fitting - 8 mm (5/16 in.) x 9.5 mm (3/8 in.) Reducer

    5 reviews

    This Duotight reducer is used when stepping down from 9.5 mm OD (D1719) to 8 mm OD EVABarrier tubing (D1717 & D1718). Duotight fittings are high-quality push-in fittings that seal tight and offer superior sealing capacity due to the double O-ring sealing design. High Performance Double O-Ring Design: The secret to Duotight’s superior sealing performance comes from the fact that they use not one, but two high-quality EPDM O-rings. The double O-ring means they have literally twice the sealing surface when compared with other push-in fittings. This makes them more reliable and significantly reduces the chance of leakage. The double O-ring system also means that tubing can be bent at a much tighter radius without causing leaking issues, which can be an issue with other fittings. This combination of factors makes Duotight the most reliable push-in fittings on the market. EPDM offers excellent chemical resistance for a longer life span. When compared with silicone and vinyl, EPDM has much better gas transmission rates, better wear resistance, and is BPA-free. No Clamps Necessary! We recommend cutting your tubing straight, not on an angle, to ensure the line forms a complete seal. To remove the fitting simply push in the collet and the hose can be removed. Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Kegland Part number: KL06941

    $3.29

  • Torpedo Keg Faucet - Stainless Steel - Handheld (Picnic Tap) - 1/4 in. Male Flare Torpedo Keg Faucet - Stainless Steel - Handheld (Picnic Tap) - 1/4 in. Male Flare

    Torpedo Keg | Hand Held Beer Faucet | Cobra Tap | Picnic Tap | 1/4" Flare | Stainless Steel

    8 reviews

    Finally, a high-quality, stainless steel, handheld faucet for discerning beer servers on the go! For too long there have been no other option than the standard plastic picnic tap. Torpedo Keg decided to fill the void with a top-shelf mobile draft faucet made with stainless components and internal parts. You'll feel the quality in the smooth pouring action and love the weight of it in your hand. This is definitely not the beer tap you used in college! 1/4" flare connection allows for easy connection to EVABarrier draft tubing via Duotight adapter, or your preferred tubing with swivel nut and barb.

    $19.99

  • Growler Spout - Intertap/NukaTap Growler Spout - Intertap/NukaTap

    Growler Filling Spout | Intertap® | NukaTap®

    22 reviews

    Easily attaches to any Intertap faucet. Just unscrew the standard spout and replace it with this growler spout. Then you'll have a 1/2" (13mm) barb on the end of your faucet. Compatible with Intertap and NukaTap faucets. Stainless Steel Construction Kegland Part number: KL01038  

    $6.59

  • Keg Coupler - Low Profile Elbow Bend Keg Coupler - Low Profile Elbow Bend

    Low Profile Elbow Bend for Keg Couplers

    10 reviews

    Made from solid stainless steel, this low profile elbow bend with Male and Female Beer Thread (5/8" BSP) sits just 17 mm (.66 in) above the keg coupler. Perfect for tight spaces or inside a kegerator. Keg coupler not included. Kegland Part number: KL00390

    $9.89

  • Taprite Beer Carbonation Tester Taprite Beer Carbonation Tester

    Taprite Beer Carbonation Tester

    The Taprite beer carbonation tester is designed to be used in the field to verify carbonation levels during equipment installation and keg change-outs. It is a cost effective and accurate tool for troubleshooting and quality control. The carbonation tester's sturdy, 11-ounce acrylic canister includes a handy label noting the appropriate CO2 volume based on your temperature and pressure reading. The tester's cap and fittings are made of lightweight metal with easy to grip knurling. The pressure gauge includes a protective rubber boot (600gps-01) for additional durability. Taprite's beer carbonation tester is easy to handle, easy to use, and easy to clean. Each tester comes with a cushioned carrying case, as well as inlet and outlet hoses with quick disconnects. Taprite Part Number: 2701-bct

    $434.99

  • Komos - Keg Cleaner Coupler - Male x Male Beer Thread (5/8" BSP) Komos - Keg Cleaner Coupler - Male x Male Beer Thread (5/8" BSP)

    KOMOS® Draft Line Cleaning Coupler

    This male to male coupler is commonly used in draft line cleaning. It allows the connection of draft lines for cleaning loops. Male beer thread to male beer thread (5/8" BSP).

    $19.99

  • Ball Lock Spout - Quick Disconnect (QD) - Intertap/NukaTap Ball Lock Spout - Quick Disconnect (QD) - Intertap/NukaTap

    Ball Lock Quick Disconnect (QD) Spout | Intertap® | NukaTap®

    13 reviews

    An Intertap accessory that converts the spout of an Intertap faucet into a ball lock quick disconnect. One of the most popular uses is being able to connect the beverage side of your counter pressure filler without having to open your refrigerator door. Compatible with Intertap and NukaTap faucets. Stainless Steel Construction Kegland Part number: KL01052

    $13.49

  • Sanke to Ball Lock Adapter - Gas Side Sanke to Ball Lock Adapter - Gas Side

    Sanke to Ball Lock Adapter - Gas Side

    9 reviews

    This handy adapter fits on standard keg couplers with its Female Beer Thread (5/8" BSP) and allows a ball lock connection on the gas side of the coupler. Made from 304 stainless steel. Kegland Part number: KL00833

    $15.49

  • Nukatap - Seal Kit G3 POK for Standard Faucet (Non-Flow Control) Nukatap - Seal Kit G3 POK for Standard Faucet (Non-Flow Control)

    NukaTap® Beer Faucet Parts | Replacement Seal Kit for Standard NukaTap® Faucet

    Includes the newest Gen 3 POK cup seal washers Provides a full set of seals to quickly fix leaks, replace lost seals, or maintain taps used in demanding settings Compatible with all standard NukaTap beer faucets (not suitable for the flow control model) This handy kit contains all the seals needed for the standard NukaTap stainless beer faucet. Regardless of which generation of seals your faucet came with, you can replace or upgrade them with the Gen 3 POK cup seal washers. For the NukaTap Flow Control seal kit, see here. Most of the seals in this kit are durable and won't require frequent replacement. However, if you experience a leak, accidentally lose a seal, or use the tap in a demanding commercial environment, this kit has you covered. When replacing seals, we recommend applying a food-grade lubricant to ensure a long-lasting and secure fit. As you take the tap apart, it can also be helpful to take a picture or make a note of where each seal is located to make reassembly easier. Includes: The Nuke! Tap Coupling Washer Bonnet Washer 2 x Black Generation 3 POK Cup Seal Washers Nozzle Washer How to tell what generation NukaTap you have: Generation 1 - Two White Nylon Cup Seal Washers Generation 2 - Two Red Self Lubricating Nylon Cup Seal Washers Generation 3 - Two Black POK Cup Seal Washers KegLand Part Number: KL43021

    $5.49

  • Creamer Aerator Perforated Discs - 7 Discs - Nukatap/Intertap Stout Spout Compatible Creamer Aerator Perforated Discs - 7 Discs - Nukatap/Intertap Stout Spout Compatible

    Creamer Aerator Perforated Disc Kit for Stout/Nitro | 7 Discs | Intertap® | NukaTap®

    Tune the Stout Spout on your Intertap or NukaTap faucet with this set of perforated discs! Not all beverages are the same so this kit offers a range of aerator discs so you can find the perfect disc for your stout or cold brew coffee. The Stout Spout has a removable creamer/aerator disc inside. It is specially made to serve beers infused with nitrogen gas, and allows the nitrogen gas to flow smoothly through the faucet with the beer to create a smoother, creamier beer. With this range of discs, you can mix and match with ease to find which one serves your particular beverage justice with more restriction or more areas for that creaming effect to push through the spout. Kit Contains: 0.3mm Drilled Disc with 3 x holes 0.3mm Drilled Disc with 5 x holes 0.5mm Drilled Disc with 1 x hole 0.5mm Drilled Disc with 3 x holes 0.5mm Drilled Disc with 5 x holes 0.7mm Drilled Disc with 1 x hole 0.7mm Drilled Disc with 3 x holes KegLand Part Number: KL12591

    $10.99

  • Perlick Stainless Faucet - Model 630SS

    Perlick Faucet - 630SS Stainless Steel

    123 reviews

    For you, The Discerning Kegger, these Perlick beer faucets are a thing of beauty. When you draw off a pint, they look good, operate smoothly, and don’t gum up. They are a breeze to take apart for sanitizing. These design benefits will have you sold on the lifetime value of these taps.   #1 Design Benefit - Forward Sealing The #1 feature of the Perlick faucet is its forward sealing design. Why is that so important? In an ordinary, rear-sealing faucet, the entire faucet must drain out of beer. There is actually a pin hole in the back of an ordinary faucet that allows beer to drain out. Because beer drains from the entire faucet the faucet remains sticky and is prone to contamination from the left over residue. The Perlick faucet, with its forward sealing design, only has beer drain from the short 1" nozzle section. This allows it to always operate smoothly (even when it was not cleaned between uses) and greatly reduces contamination.   #2 Design Benefit - Stainless Steel Standard old school faucets are made of brass that is plated in chrome. The chrome plating wears off and the Brass can pit. This can result in flavor contamination when your beer runs over exposed brass and pits which usually harbor bacteria.   In the late 90's, when the first stainless faucet was released, it cost close to $100. Wow. Now you can choose to get a traditional style faucet made out of stainless, but why would you bother when you can get this unique forward sealing design and stainless construction all in the same Perlick faucet?   Sure it costs a little more but you will never regret making the upgrade now.    

    $64.99

  • Draft Cleaning Kit Draft Cleaning Kit

    Beer Line Cleaning Kit

    36 reviews

    Life is too short to drink bad beer! Beer flavor gets funky when your tap, line and faucet are filled with beer stone--a left over gift from pints long  since poured. You do NOT want to share that with your friends!   Ideally you want to clean your lines after every keg, but at the very least cleaning them a few times a year (we like quarterly) will keep your brew pouring fresh and your friends asking for more! Our Draft Cleaning Kit comes with a 1 qt hand pump that pushes Beer Line Cleaner (4 oz size included) through your whole draft system. The faucet gets removed and cleaned with the included faucet wrench and brush. Perfect for cleaning home kegerators as well. 

    $49.99

  • Duotight In-Line Plastic Regulator w/ Integrated Pressure Gauge (0-150 psi) - 6.35 mm Duotight In-Line Plastic Regulator w/ Integrated Pressure Gauge (0-150 psi) - 6.35 mm

    Duotight In-Line Regulator | Built-In Pressure Gauge | 0-150 PSI | Liquid & Gas Compatible | 6.35 mm Duotight

    Perfectly sized for use with water lines—step down the pressure of your mains for use with water filtration systems Built-in pressure gauge for easy reference when adjusting pressure settings Pressure gauge is interchangeable—swap to different pressure ranges that better suit your application Compatible with both liquid and gas 6.35 mm Duotight inlet/outlet for use with 6.35 mm OD PE Water Line or EVABarrier tubing The Duotight In-Line Regulator works with both gas and liquid. Easily adjust the flow can be adjusted with the yellow adjustment knob. 6.35 mm Duotight fittings at both inlet and outlet make this unit perfect for use with 6.35 mm OD tubing (D1723C or D1727C). Features an integrated pressure gauge so you can quickly and easily dial in your pressure setting. The analog gauge is removable and can be swapped out with a gauge of a different pressure range or it can be swapped out for the Digital Mini Pressure Gauge. The size of the Duotight connection and the extended 0-150 PSI pressure range makes this model perfect for stepping down the pressure of your mains water line for use with water filtration or RO systems. Specifications: Made from food grade acetal Stainless screws Easily disassembles for cleaning 6.35mm (1/4") Duotight fittings at both ends Interchangeable pressure gauge Gauge reads from 0-150 psi Made with quality EPDM seals Wall mountable WARNING: Do not exceed gauge pressure. Exceeding the pressure range will damage the gauge. Kegland Part number: KL26918

    $19.49

  • 1/4" Aluminum Gas Manifold - PLACEHOLDER 1/4" Aluminum Gas Manifold - PLACEHOLDER

    Gas Manifold - 1/4 in. (Aluminum)

    Manifolds are a great way to have one CO2 tank supply multiple kegs. This manifold is made from aluminum, brass, and stainless. It also works up to 100 psi and includes 1/4 in ball valves with built in check valves. Another ball valve can be added to the end of the manifold for an additional gas line. Multiple manifolds can be linked up with a 1/4" nipple (D1820B). Features: 1/4" BSP ball valves 1/4" barbs Rated up to 100 psi Screw holes for easy mounting Optional additional port on the end SKU Overall Length D1802 5-1/2 in. D1807 7-3/8 in. D1811 9-5/8 in. D1813 11-1/2 in. D1816 13-1/2 in. The above measurements are from the tip of the brass barb to the plug on the opposite end. Each manifold measures approximately 3.5" from the mounting holes to the tip of the valve. Kegland Part number: KL02554

    $26.49 - $54.99

  • Carbonation & Line Cleaning Cap - Stainless - Ball Lock Quick Disconnect (QD) (Bev/Gas Compatible) - Duotight Compatible Carbonation & Line Cleaning Cap - Stainless - Ball Lock Quick Disconnect (QD) (Bev/Gas Compatible) - Duotight Compatible

    Carbonation and Line Cleaning Ball Lock Quick Disconnect (QD) Cap - Stainless - Duotight Compatible

    This stainless steel ball lock cap features soda bottle threads, allowing you to convert a 1 or 2 liter soda bottle into a convenient travel growler. The ball lock is compatible with both gas and beverage disconnects, so you can charge the PET bottle before you leave the house and dispense on the go. Use the Duotight compatible stem to connect a 8mm or 9.5mm reducer, then attach EVABarrier draft line to serve as your dip tube and you're all set! These caps also work great for quickly and conveniently cleaning your draft lines. Mix up a small batch of line cleaning solution in a soda bottle, attach the ball lock cap, and then connect it to your beverage line. Place a bucket below your tap to catch the cleaning solution and open your faucet. Then simply turn the bottle upside down and squeeze it to push solution through your line and out the faucet. You can also choose to pressurize the bottle first, but squeezing the solution through is just as effective. Fermenting with the FermZilla? This is ball lock fitting is also compatible with the FermZilla Collection Container. If you use the collection container to add dry hops, attach one of these caps and you'll be able purge the container of oxygen before opening the dump valve to introduce the hops. Attach some tubing and diffusion stone and you can oxygenate your wort through the collection container as well! Features: 6.5mm Duotight Compatible Liquid and Gas Ball Lock Compatible Disassembles for Easy Cleaning Made from Stainless Steel 28mm PCO 1881 Threads Please note: The threaded section of the bottleneck must be at least 1/2" long to form a seal. These caps are not compatible with the KegLand 500mL PET Bottles. Kegland Part Number: KL20435

    $15.49

  • Duotight - 9.5mm (3/8) x 1/2 inch Male BSP Duotight - 9.5mm (3/8) x 1/2 inch Male BSP

    Duotight Push-In Fitting - 9.5 mm (3/8 in.) x 1/2 in. BSP

    4 reviews

    This Duotight fitting with 1/2" male thread is perfect for attaching to the Copper Counterflow Chiller (WC130) and using with 1/2" female threaded Camlock and QD fittings. Compatible with EVABarrier 9.5 mm OD tubing (D1719). Duotight fittings are high-quality push-in fittings that seal tight and offer superior sealing capacity due to the double O-ring sealing design. High Performance Double O-Ring Design: The secret to Duotight’s superior sealing performance comes from the fact that they use not one, but two high-quality EPDM O-rings. The double O-ring means they have literally twice the sealing surface when compared with other push-in fittings. This makes them more reliable and significantly reduces the chance of leakage. The double O-ring system also means that tubing can be bent at a much tighter radius without causing leaking issues, which can be an issue with other fittings. This combination of factors makes Duotight the most reliable push-in fittings on the market. EPDM offers excellent chemical resistance for a longer life span. When compared with silicone and vinyl, EPDM has much better gas transmission rates, better wear resistance, and is BPA-free. No Clamps Necessary! We recommend cutting your tubing straight, not on an angle, to ensure the line forms a complete seal. To remove the fitting simply push in the collet and the hose can be removed. Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Kegland Part number: KL06927

    $3.29

  • EVABarrier Beer Tubing Assembly - 4mm ID x 8mm OD - Ball Lock Quick Disconnect (QD) EVABarrier Beer Tubing Assembly - 4mm ID x 8mm OD - Ball Lock Quick Disconnect (QD)

    EVABarrier Beer Line Assembly - Ball Lock Quick Disconnect (QD)

    5 reviews

    The most advanced Beer Tubing Assembly we offer, featuring EVABarrier double-walled draft tubing and Duotight push-to-connect fittings. This double walled tubing offers superior protection against oxidation, CO2 loss and microbial growth. Plus, it's BPA and PVC free! EVA tubing is the future of draft line for professional applications, and now you can dispense beer on the go with the same first-class tubing. Includes 5.5 ft. of 4mm ID x 8mm OD EVABarrier, which should give you the perfect back pressure to control foaming issues. The hand held faucet features a Duotight compatible barb so it can connect directly to the Duotight reducer. At the other end is a ball lock quick disconnect with flare Duotight fitting. Inner Diameter - 4 mm (5/32") Outer Diameter - 8 mm (5/16") PVC, BPA , and Plasticizer Free* Outer wall prevents oxidation and CO2 loss Smooth inner wall prevents microbial growth build-up   *EVABarrier does not contain plasticizers, or phthalates, that are used to make PVC flexible. These plasticizers are known to leach out into the beer over time and have adverse health effects. ** Unit does not come pre-assebmled.  

    $19.99

  • NukaTap Mini Faucet - Plastic - Matte Black NukaTap Mini Faucet - Plastic - Matte Black

    NukaTap® Mini Beer Faucet | Matte Black | Forward Sealing

    1 review

    The ultimate portable draft faucet! Compact & lightweight with all the advantages of a standard NukaTap forward sealing faucet Pair with a Flow Control Ball Lock QD & Duotight Adapter and the whole assembly fits in your pocket Forward-sealing design prevents beer residue from gumming up the faucet Reduced first pour foam due to low thermal mass and conductivity Perfect for mobile draft, mini kegs, sampling from fermenters, and can even be installed on your kegerator or keezer Mini Design – Ideal Flow Rate for Small Systems Most conventional beer faucets are designed with 3/8" diameter spouts so you can pour a pint in just over 10 seconds. This type of flow rate is great for high turnover bars and commercial venues but isn't necessary or even desirable for all applications. For compact portable systems and home draft systems, a slower flow rate is easier to control and further reduces foaming issues due to the low liquid volume stored in the body of the faucet. The NukaTap Mini is also more ideal for pouring smaller doses. For example, cocktails where 5-8 oz of liquid is dispensed is difficult to control with a high flow rate tap. For portable systems, the NukaTap Mini with the Flow Control Ball Lock QD & Duotight Adapter assembly is small enough to literally put in your pocket, making it ideal for mini keg setups that you want to be portable or that you want to easily fit inside a domestic fridge where space is tight. Forward Sealing Forward sealing faucets are absolutely the way to go when it comes to beer taps. Old legacy taps still exist in the industry that are simply poorly designed. The issue with rear sealing faucets is that beer dries up on the internal piston. Aside from being unsanitary, as more and more beer dries up in these components the faucet can almost glue completely shut causing damaged seals or broken handles (this is particularly the case if it's left for some time to dry out with beer inside). These older legacy designs still exist probably due to poor education. The forward sealing designs do not have this problem and the tap drains out completely with no beer drying up on the mechanical moving parts in the same way. This makes the tap more sanitary and reduces maintenance. In many instances the price is similar so there is no reason to use a poorly designed rear sealing faucet. All NukaTap faucets are forward sealing. Laminar Flow Just like the NukaTap SS and NukaTap FC, the NukaTap Mini has been designed with laminar flow in mind. Laminar flow is critical for a beer tap as it means you will pour the beer with minimal foaming and a substantial reduction in wastage. Think about how many times a beer faucet opens and closes in its lifetime. 1,000 or maybe 10,000 times? Laminar flow saves wasted beer in excessive foam and the better laminar flow easily pays for itself in a reduction in lost beer. To use poorer designed faucets is essentially flushing money down the sink. Extensive modeling has been done on the NukaTap design to improve laminar flow. Integrated Seals That Are Indestructible and More Sanitary Unlike other designs, the NukaTap Mini body is made from Polyketone (POK) making it strong, robust, and able to be autoclaved. The seals are also over-molded from Santoprene® making them hard wearing so they will literally last for the lifetime of the tap without the need for replacement. Santoprene® and POK both have excellent resistance to chemicals such as caustic soda, peroxide, phosphoric acid, lactic acid, citric acid, acetic acid, and all common chemicals sold and used in the beverage industry. The seals internally are over-molded meaning no fissures or cracks exist for bacteria, crud, or yeast to hide. Superior First Pour Foam Due to Low Thermal Mass and Conductivity First pour foam is an issue caused by a warm tap body. For most faucets to pour well it's important to dispense enough beer to cool the tap body down to reach maximum performance. In addition to this the conductivity of the tab body also makes this worse so insulative materials simply work better than conductive materials. The NukaTap mini not only has very low thermal mass but is also highly insulative being made mostly from Santoprene® and POK. The combination of these two factors in conjunction with superior laminar flow makes for the lowest "first pour foam" effect out of any tap ever produced. Long Shank Alternative Most conventional beer faucets require a large 3/4" hole to be drilled through the side of your refrigerator, keezer, or cold box wall. Traditional long shanks also generally have a large volume of liquid that sits inside the wall unrefrigerated which is not ideal. New long shank alternatives developed for the NukaTap Mini are designed to suit any wall thickness and greatly reduces the stagnant beer sitting in the shank itself. For walls up to 2.7" thick, these wall mount shank kits include three screws, however if the wall is thicker, you can also use 6 small wood screws or something similar and attach three screws from the front and 3 from the back allowing you to go into any wall type. Another advantage of this new design is the tap will never accidentally rotate. Typically, other long shank beer taps rely on the hex nut on the shank to be done up tight enough to prevent rotation but if the wall compresses (often the case with foam walls) the tap is allowed to rotate. This new design has three fixing points making it impossible for the tap to rotate accidentally as the interlocking teeth behind the collet allow you to set the angle and then do up the collet to fix the tap permanently in that position. NukaTap Mini Accessories (Sold Separately): Duotight Flow Control Ball Lock QD (DUO159) Mini Self Closing Spring (D1598A) Duotight Adapter - 8mm (D1598B) Long Shank Alternative for Wall Mounting - Duotight 8mm (D1598C) Long Shank Alternative for Wall Mounting - Duotight 6.35mm (D1598D) Stout Spout (D1598E) Vertical Clamp On Assembly (D1598G) Horizontal Clamp On Assembly (D1598H)

    $21.99

  • KOMOS Keg Coupler - D-Style Sanke Coupler with PRV (Stainless) w/ 8mm Duotight Adapters

    KOMOS® Stainless Steel D-Style Keg Coupler with 8 mm Duotight Adapters

    1 review

    With Duotight adapters you can take your draft system into the 21st century with EVABarrier draft line. This double walled tubing offers superior protection against oxidation, CO2 loss and microbial growth. Plus, it's BPA and PVC free! EVA tubing is the future of draft line for professional applications, and now you can rig up your home system with the same first-class tubing. 4 mm x 8 mm EVABarrier is our recommended size for short beer lines in the 5-6 ft. range. 5 mm x 8 mm EVABarrier is recommended for longer beer lines in the 10-12 ft. range. D-style sanke coupler Stainless body Stainless probe PRV rated to 4.5 BAR (65 psi)  

    $49.99

  • Nukatap - Seal Kit G3 POK for Flow Control Faucets Nukatap - Seal Kit G3 POK for Flow Control Faucets

    NukaTap® Flow Control Beer Faucet Parts | Replacement Seal Kit for Flow Control NukaTap® Faucet

    Includes every replacement seal for the NukaTap Flow Control faucet, ensuring you're prepared for any maintenance needs This kit contains all the seals needed to upgrade a Gen 1 NukaTap Flow Control faucet to the Gen 2 mechanism, improving performance and longevity Provides a full set of seals to quickly fix leaks, replace lost seals, or maintain taps used in demanding settings This complete kit provides all the replacement seals you need for the Gen 2 NukaTap Flow Control faucet. If you have the Gen 1 Flow Control model, you can use the improved flow control mechanism in this kit to effectively upgrade your faucet to the Gen 2 Flow Control model. Most of the seals in this kit are durable and won't require frequent replacement. However, if you experience a leak, accidentally lose a seal, or use the tap in a demanding commercial environment, this kit has you covered. When replacing seals, we recommend applying a food-grade lubricant to ensure a long-lasting and secure fit. As you take the tap apart, it can also be helpful to take a picture or make a note of where each seal is located to make reassembly easier. Includes: The Nuke! Bonnet Washer 2 x Black POK Cup Seal Washers Nozzle Washer Flow Control Arm Seals Flow Control Arm Thread Seals Gen 2 Flow Control Mechanism KegLand Part Number: KL44950

    $5.49

  • Duotight - 9.5mm (3/8) Elbow Duotight - 9.5mm (3/8) Elbow

    Duotight Push-In Fitting - 9.5 mm (3/8 in.) Elbow

    3 reviews

    This Duotight elbow fitting is compatible with EVABarrier 9.5 mm OD tubing (D1719). Duotight fittings are high-quality push-in fittings that seal tight and offer superior sealing capacity due to the double O-ring sealing design. High Performance Double O-Ring Design: The secret to Duotight’s superior sealing performance comes from the fact that they use not one, but two high-quality EPDM O-rings. The double O-ring means they have literally twice the sealing surface when compared with other push-in fittings. This makes them more reliable and significantly reduces the chance of leakage. The double O-ring system also means that tubing can be bent at a much tighter radius without causing leaking issues, which can be an issue with other fittings. This combination of factors makes Duotight the most reliable push-in fittings on the market. EPDM offers excellent chemical resistance for a longer life span. When compared with silicone and vinyl, EPDM has much better gas transmission rates, better wear resistance, and is BPA-free. No Clamps Necessary! We recommend cutting your tubing straight, not on an angle, to ensure the line forms a complete seal. To remove the fitting simply push in the collet and the hose can be removed. Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Kegland Part number: KL07030

    $3.29

  • Faucet Knob (Handle)

    Faucet Handle | Beer Tap Handle | Black Cylindrical Plastic

    11 reviews

    This sleek black faucet handle blends a clean, professional look with simple functionality.     Standard size, 2.5" black cylindrical plastic faucet handle for beer faucets. 

    $4.99

  • Draft Tower Fan Kit Draft Tower Fan Kit

    Draft Tower Cooler Kit

    9 reviews

    Cooling your tower will make sure your beer stays cold from keg to glass. This fan kit blows cold air up your tower from your refrigerator which helps reduce foaming giving you a perfect pour everytime. The fan also gets rid of warm spots in your fridge by increasing air flow. Kit Includes: Fan box 12V power pack Flexible tube Kegland Part number: KL00819

    $36.49

  • Stout Faucet - Chrome

    Nitro Tap Stout Faucet

    5 reviews

    An amazing creamer style stout faucet shipped free in USA lower 48 states. Beer is forced through 5 tiny holes in the restrictor plate delivering that dense, delicous creamy head for which Guinness is so famous. Also great for use with lower carbonated Ales and Stouts. This is the faucet you would use with a Nitrogen/Co2 gas mixture in a Guinness style set up, but can also be used with a straight Co2 set up. 

    $69.99

  • Komos V2 Deluxe Kegerator with Stainless Tower and NukaTap Faucets - PLACEHOLDER Komos V2 Deluxe Kegerator with Stainless Tower and NukaTap Faucets - PLACEHOLDER

    KOMOS® Deluxe Kegerator | Stainless Steel Exterior | Fan Cooled Stainless Tower | Digital Thermostat | Casters | Regulator | Fits 1 Half Barrel Keg or 4 Corny Kegs

    Due to high demand, some of these items are currently out of stock but available for pre-order. Please check status notes below when selecting a size option to see if it is In Stock or tagged as PreBook. We will automatically ship this to you when we receive more inventory. What makes KOMOS Kegerators better than the rest? Designed to hold up to FOUR 5-gallon ball lock corny kegs (see below for full list of what fits) Serve ice cold beer even in the warmest environments thanks to highly-efficient refrigeration components Stainless steel forward-sealing faucets offer a huge upgrade over common chrome plated brass taps Choose from the classic stainless model faucet or the upgraded stainless flow control model Faucets mount to a high-quality stainless steel tower, rather than a cheap chrome plated tower Interior fan diverts cold air up into the tower to keep your beer lines cold and reduce foaming EVABarrier double walled draft tubing protects your beer against oxidation Duotight push-to-connect fittings make assembly a breeze Included KOMOS Dual Gauge CO2 Regulator maintains consistent pressure and is easily adjusted The KOMOS® Deluxe Kegerator model features an eye-catching stainless steel exterior and upgraded stainless steel drip tray The KOMOS Kegerator offers a stunning set of features that clearly separate this unit as the most modern kegerator on the market. With more interior space than other models, the KOMOS Kegerator is designed to fit up to four 5-gallon Slimline Torpedo kegs or Pepsi-style Ball Lock Corny kegs. Whether you choose the single, double, triple, or quad tap configuration, you'll receive stainless steel forward-sealing faucets in either classic or flow control model. Stainless faucets are a huge upgrade over the chrome-plated brass faucets commonly included with other kegerators, and you'll quickly recognize the quality of a forward-sealing beer faucet compared to the standard taps seen at your local tavern or in-law's mancave. Rather than a chrome plated tower, the NukaTap faucets are mounted to a stainless steel tower that remains cool before, during, and after each pour thanks to a tower fan diverter that recirculates cold air within the kegerator and blows it up into the tower to keep your beer lines cold and reduce foaming. From keg to faucet, your beer will pass through EVABarrier draft lines, a premium double-walled tubing designed to protect against beer oxidation. And with Duotight push-to-connect fittings, you'll have your lines connected in a snap with no need to force the tubing over barb fittings or fiddle with hose clamps. Other features you'll love about the KOMOS Kegerator include its highly-efficient cooling capacity so you'll be serving ice cold beer even in the warmest temperatures, extra wide temperature range from 26–82°F, dual gas inlets at the back, aluminum internal floor, rolling casters, and the included KOMOS Dual Gauge CO2 regulator. The most eye-catching difference between the KOMOS unit and other kegerators is definitely the capacity. This is the first kegerator we have offered that comes with a quadruple tap tower option, and that’s all thanks to the redesigned interior. Most kegerators position the compressor on the right or left side of the inside floor, making one side shallower than the other. KOMOS positions the compressor in the middle so both sides of the interior have an equal depth. This seemingly small detail allows the unit to hold up to four 5-gallon Slimline Torpedo or Ball Lock Corny kegs. Dual gas line inlets are absolutely clutch if you want to serve beverages at two different pressures or use two different types of gas. Both inlets are just over 3/4" in diameter and feature PCO 1881 threads. This threading allows you to use the plastic Carbonation Ball Lock Cap (FE13) as a quick connect option for your gas lines. Upgraded condenser, evaporator, and insulation make this unit highly efficient, yet quiet, so you can serve ice cold beer in even the warmest temperatures. The unique internal fan provides excellent air circulation, pulling cold air from below the evaporator and blowing it back over the top of your kegs and up into the tower to chill your draft lines. Extra Wide Temperature Range is Perfect for Homebrewers The KOMOS kegerator is tailored to a homebrewer's needs. Take, for example, the extended range digital controller with an adjustable temperature range from 26 - 82°F. This allows homebrewers to use as fermentation chamber and is something that other kegerators don't do. Although the unit does not provide heating, the extended range allows you to program the internal temperature at say an ale fermentation temp of 68°F and will provide cooling whenever the temp rises above that set point. With the insulation provided by the kegerator, heating should rarely be needed, but you can always place a low wattage heat wrap inside the unit if ever needed. The digital controller always displays the temperature and is easily adjusted from the front of the kegerator with the door closed. It's pretty nice. Forward-sealing Stainless Faucets and Towers All KOMOS kegerators come with NukaTap stainless steel forward-sealing faucets and a stainless steel draft tower. Forward-sealing means that while in the closed position the faucet will keep beer in it instead of draining out. This keeps the internal parts from getting sticky and reduces the chance of off flavors transferring to your beer while you pour. Most other kegerators on the market will only include the cheapest, standard chrome-plated beer faucets that you'd find at any dive bar. KOMOS kegerators include not only a faucet that features superior pour technology, but made from stainless steel which won't corrode over years of use.   Choose from the classic forward-sealing faucet model or the upgraded flow control model that allows you to dial in the flow rate of the beverage you're dispensing. The flow control faucet is a great option for users that often switch between beer styles with different carbonation levels. No need to rebalance your lines or play with your regulator settings. Instantly make adjustments as you pour to dial in the flow rate. This is also a super convenient feature for when you want to grab a quick growler on your way out. By dialing back the flow rate, you can gently fill your growler so CO2 stays in solution and your beer doesn't pour flat when it comes time to share. Click here to learn more about the Classic and Flow Control faucet models. Duotight Fittings & EVABarrier Draft Tubing Duotight and EVABarrier have revolutionized how you connect draft line, and our kegerators come standard with both. We love Duotight push-in fittings for their quick connection, reliable seal, and versatility. Setting up and connecting draft line has never been easier -- no more hose clamps or heating water to soften tubing! Each kegerator comes with Duotight fittings for the tower shanks, regulator, and for splitting gas lines (double & triple tap only). We recommend adding Duotight fittings to use for your keg connections as well. Depending on whether you'll be serving from homebrew kegs or commercial sanke kegs, you'll need two DUO106 or two DUO104 per line.   EVABarrier tubing has been engineered with protection in mind and is both PVC-free and BPA-free. This double walled tubing offers superior protection against oxidation, CO2 loss, and microbial growth. EVA tubing is the future of draft line for professional applications, and now your kegerator will feature the same first-class tubing. KOMOS Regulator The included high-quality KOMOS CO2 regulator maintains consistent pressure and features a blow-off PRV with pull ring for safety and to relieve pressure, rubber coated gauges, and a hand knob for easy adjustment. Many kegerator brands will include the cheapest regulator they can find, and while these regulators may work OK out of the box, they will eventually show signs of pressure creep which can lead to foamy beer and other issues with your draft system. Rather than have you rely on a regulator that is "just OK", KOMOS kegerators include their own premium dual gauge regulator with highly accurate precision diaphragm and heavy-duty steel gauges. Included with your kegerator package is a Duotight fitting that attaches to the regulator for an easy, solid, push-to-connect connection with your gas line.   Added Features One of the unique features on a kegerator in this price range is the tower fan, which blows cold air up into your tower to reduce foaming issues. They also come standard with the KOMOS dual gauge CO2 regulator, which is super beefy and consistent in delivering accurate pressures. Most Chinese-made regulators experience creep where the pressure increases over time. The KOMOS regulator is by far the best CO2 regulator we have seen made in China.   The countertop drip tray couldn't be easier to keep clean. Built-in drip trays look cool, but they're a pain to keep clean. Before long they get pretty disgusting with dried, spilled beer -- attracting fruit flies and becoming a haven for mold and bacteria to grow. They'll often overflow the reservoir inside the kegerator causing a huge mess. Our kegerator's tray is designed to be removed and easily washed. Best Value & Backed by MoreBeer! We've looked around, and when you factor in fast and free shipping, you are getting the very best value on a kegerator in the USA. Plus, you're getting MoreBeer! service if something happens in shipment. We double box the unit with foam pads and have very little shipping damage. However, it will be delivered via Fed-Ex ground so damage is possible. If your unit arrives damaged just call us up and we will work with you to take care of it.   Feature Summary:   Stainless Steel Air Cooled Tower NukaTap Stainless Steel Forward-Sealing Faucets Choose faucet model and number of taps above Duotight Fittings make connecting draft lines a breeze Digital Thermostat with wide 26 - 82° F temp range. Robust KOMOS Dual Gauge Regulator included CO2 Tank holder mounts on back of kegerator (tank not included) Efficient and powerful compressor Stainless steel door, top cover, and side panels Stainless Countertop Style Drip Tray Aluminum floor for additional keg support Includes EVABarrier beer and gas tubing Beverage line measures 4mm ID x 8mm OD 1 x 1.7m length of line per tap Gas line measures 5mm ID x 8mm OD 1 x line of varying length depending on number of taps (2, 2.5, or 3m) 4 Tap model includes uncut rolls of bev & gas line We recommend cutting bev lines to 1.7-2m lengths (5.5-6.5 ft.) Gas lines can be cut to whatever length best suits your needs Duotight adapters for draft shank and regulator connections Duotight tee fittings for splitting gas lines (2, 3, 4 tap only) You will need to purchase keg connections depending on whether you are serving commercial sanke, ball lock corny, or pin lock corny For ball lock and pin lock disconnects we recommend DUO106 For commercial sanke keg couplers we recommend DUO104 Available Kegerator covers and "off road" casters for moving over uneven terrain Detailed instructions on assembly and use Specifications: 23.75" wide 25" deep 31.5" with CO2 mount 32.5" Tall (fridge only) 35" with Caster wheels 48.75" with tower 51" with Casters and Tower 110 v - 60 hz 0.8 Amp draw Optimal ambient temperature is 65°F – 80°F CSA Certified Internal Dimensions: 19.5" wide 17" deep 16" down the center where compressor sits 28.5" tall What Fits: 5 Gal. Torpedo Keg - 3 5 Gal. Slimline Torpedo Keg - 4 6 Gal. Torpedo Keg - 3 5 Gal. Megamouth Torpedo Keg - 1 5 Gal. Pin Lock Cornelius Keg (Corny Keg) - 3 5 Gal. Ball Lock Cornelius Keg (Corny Keg) - 4 5.2 Gal. Oxebar PET Keg - 3 5.16 Gal. Sixth Barrel Keg (Sixtel, Log) - 3 (1) 5.16 Gal. Sixth Barrel Keg + (1) 7.75 Gal. Slim Quarter Keg 7.75 Gal. Quarter Barrel Keg (Pony Keg, Stubby Quarter) - 1 7.75 Gal. Slim Quarter Keg (Tall Quarter, The Slim) - 1 15.5 Gal. Half Barrel Keg (Full Size Keg) - 1 See below for the Kegerator Instruction Manual. (The Deluxe Kegerator does not have feature a Guard Rail as seen in the residential kegerator instructions.) Please note: This unit requires 4" of clearance on all sides and is not intended to be installed under a countertop. For a build-in unit, see the KOMOS Pro Stainless Steel Kegerator.      

    $949.99 - $1,129.99

  • SodaStream Regulator Adapter - TR21-4 x CGA320 SodaStream Regulator Adapter - TR21-4 x CGA320

    KegLand Deluxe Sodastream Cylinder Adapter w/ Pin Adjustment | CGA320 Male Thread x TR21-4 Female Thread | KL24662

    If you're tired of losing gas every time you connect or disconnect your Sodastream cylinder to your normal Sodastream cylinder adapter, this new design is what you need. Unlike cheaper Sodastream cylinder adapters, this unit has the added advantage that you can use the side thumb screw to depress the pin in the middle of the adapter. This pin adjustment makes the Sodastream cylinder adapter significantly easier to use. Some adapters require an Alan Key wrench to adjust the pin height, and depending on how worn out your seal is, you may need to adjust this pin periodically. Conventional, cheaper Sodastream adapters also tend to leak gas every time you connect and disconnect them from your regulator or the adapter itself. If you have a Sodastream Cylinder, you can use this adapter to connect it to a CGA320 CO2 Regulator. This is a great choice for mobile draft applications when you don't want to carry around your home draft system's 5 lb or larger CO2 tank. CGA320 Male Thread x TR21-4 Female Thread NOTE: Does not include CO2 regulator or Sodastream Cylinder seen in the example photos. KegLand Part Number: KL24662

    $32.99

  • Monotight - 6.35mm (1/4) Check Valve Monotight - 6.35mm (1/4) Check Valve

    Monotight Push-In Fitting - 6.35 mm (1/4 in.) Check Valve

    This Monotight check valve is a great idea for protecting your regulator. It has a low opening pressure of 1 psi, and since it cannot be opened or taken apart, it is recommended for gas applications only. The internal components are made from stainless steel. Compatible with EVABarrier 6.35 mm OD Tubing. Monotight brings the same superior quality as Duotight push-in fittings but more appropriately sized for applications including water treatment equipment, water filters, reverse osmosis fittings, and more. In addition, they are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Kegland Part number: KL21968

    $4.39

  • Faucet Rebuild Kit

    Beer Faucet Parts | Rebuild Kit

    5 reviews

    Fix your old, stuck, or leaky faucet with new washers! Most faucets that aren't working properly, just need a good cleaning and some new washers Fits most American beer faucets, including D1200, D1205, D1207, and D1215 Does not work on stout, forward sealing, or European faucets   Fix an old faucet that is still functionally sound but is old, leaking or just hard to use. Fits our faucets D1200, D1205,D1207, & D1215 and 95% of all beer faucets ever made. Does not work on stout faucets, the sealed forward faucets, Perlick faucets, nor European faucets.

    $3.49

  • Beverage Jumper Line - Ball Lock Quick Disconnect (QD)

    Corny Keg Ball Lock Quick Disconnect (QD) Jumper Line

    24 reviews

    Connect two ball lock homebrewing kegs together via their ball lock our fittings. Handing for moving sanitizer or beer from one keg to the next. We often use this fitting when we have a big party where we dixie chain kegs together.  For example if you made 10 gallons of pale ale you can use this jumper to connect the two kegs so that all 10 gallons can pour at once.  

    $17.99

  • Nitrogen Regulator - Dual Gauge

    Taprite Dual Gauge Nitrogen Regulator | Argon | Beer Gas Mix | 0-50 PSI Working Pressure | CGA580 Inlet | One Way Shutoff Valve | 5/16" Barb Outlet

    11 reviews

    Get that eye-catching cascading effect by serving your Stouts & Porters with a nitrogen tank filled with beer gas mix! Serve still beverages on draft with pure nitrogen or argon—serving still bevs with CO2 will lead to carbonation over time Dual high-pressure and low-pressure gauges to easily reference cylinder pressure and output pressure CGA580 inlet compatible with standard US nitrogen and argon tanks Made in the USA. Taprite is one of leading manufacturers of gas regulators and draft dispensing equipment One-way shutoff valve outlet protects your regulator from backflow and can be turned on/off to stop gas flow without needing to close your tank This Taprite Nitrogen Regulator will allow you to add Nitro-Draft capability to your home dispense system! Use this dual gauge nitrogen regulator to connect a tank of Beer Gas mix (70% Nitorgen/30% CO2) to your keg for an authentic nitro-pour! Traditionally used for stouts and porters, a nitro pour is becoming popular with more and more beer styles, lending its signature creamy mouthfeel and head to the beer. An amazing upgrade to any brewer's draft system. Made in the USA by Taprite. 5/16" barb.

    $129.99

  • KOMOS Matte Black Draft Tower Kit (with Black NukaTap, Duotight & EVABarrier) - PLACEHOLDER KOMOS Matte Black Draft Tower Kit (with Black NukaTap, Duotight & EVABarrier) - PLACEHOLDER

    KOMOS® Matte Black Draft Tower With NukaTap® Faucets (w/ Duotight Fittings)

    Due to high demand, some of these items are currently out of stock but available for pre-order. Please check status notes below when selecting a size option to see if it is In Stock or tagged as PreBook. We will automatically ship this to you when we receive more inventory.   NukaTap faucets offer reduced first pour foam due to low thermal mass Forward-sealing design prevents beer residue from gumming up the faucet Unique shuttle design greatly improves laminar flow, improving the pour of carbonated beverages Compatible with all Intertap faucet accessories and shanks Matte Black painted finish. See note below. Nothing looks quite as nice as beer pouring out of a sleek, matte black draft tower. These are the same tower kits included with the KOMOS Kegerator, featuring NukaTap Stealth Bomber faucets, EVABarrier draft tubing, and Duotight push-to-connect fittings for easy assembly. The tower is made from 304 brushed stainless steel, making them corrosion resistant while also looking great! NukaTap Stainless Faucets and Towers These kits come with NukaTap Stealth Bomber faucets mounted on a stainless tower with matte black finish. NukaTap is the newest brand of forward sealing faucets that boast a lower thermal mass for reduced first pour foam. They feature a "nuke-shaped" internal shuttle that is made from TPV, which provides superior laminar flow to further reduce foaming issues. All faucet spout attachments and accessories are cross compatible between Intertap and NukaTap. Forward-sealing means that while in the closed position the faucet will keep beer in it instead of draining out. This keeps the internal parts from getting sticky and reduces the chance of off flavors transferring to your beer while you pour. The modular, threaded spout can fit a variety of attachments including a growler filler or stout spout. Duotight Fittings & EVABarrier Draft Tubing Duotight and EVABarrier have revolutionized how you connect draft line, and our tower kits come standard with both. We love Duotight push-in fittings for their quick connection, reliable seal, and versatility. Setting up and connecting draft line has never been easier -- no more hose clamps or heating water to soften tubing! Each tower comes with Duotight fittings for the tower shanks and for splitting gas lines (double & triple tap only). We recommend adding Duotight fittings to use for your keg connections as well. Depending on whether you'll be serving from homebrew kegs or commercial sanke kegs, you'll need two DUO106 or two DUO104 per line. EVABarrier tubing has been engineered with protection in mind and is both PVC-free and BPA-free. This double walled tubing offers superior protection against oxidation, CO2 loss, and microbial growth. EVA tubing is the future of draft line for professional applications, and now your kegerator will feature the same first-class tubing. Includes: Stainless steel draft tower w/ Matte Black Finish NukaTap Stealth Bomber faucet(s) Stainless steel faucet shank(s) with Duotight tailpieces EVABarrier gas and beverage tubing Draft tower mounting screws Faucet wrench 1-3 Tap Tower Dimensions: 13.4 in. tall (without faucets) 3 in. tower diameter 4.4 in. base diameter 4 Tap Tower Dimensions: 13.4 in. tall (without faucets) 4.5 in. tower diameter Interior mounting holes (does not include bottom collar) Please note: this is a painted faucet and as such needs to be used, cleaned, and handled with care. Clean the faucet gently by hand and avoid tossing it into a bucket with other draft parts. Excessive soaking in caustic cleaners will damage the finish. For these reasons, we do not recommend the Stealth Bomber faucets for professional settings. If you prefer a stainless steel spout that can take more punishment, the matte black towers are also sold separately and can be paired with the NukaTap Punisher Edition faucet.  

    $126.99 - $274.99

  • PVC Free Gas Tubing Assembly - Ball Lock Quick Disconnect (QD)

    PVC Free Gas Tubing Assembly - Ball Lock Quick Disconnect (QD)

    9 reviews

    An upgraded version of our popular Gas Tubing Assembly. Our new assembly now includes 5 ft of 5/16" Ultra Barrier Gas™ PVC Free Beer Tubing, ball lock gas-in quick disconnect (barb) and two hose clamps. EJ Beverages' cutting edge Ultra Barrier Gas™ tubing has a number of advantages over regular Vinyl tubing: Clear tubing with red stripe for identification as low pressure gas line PVC Free and BPA Free - containes no DEHP phthalates or other plasticizers Environmentally friendly production - does not emit dioxins Remains flexible at lower temperatures Temperature range of -40 to 125° F Pressure rated up to 60 psi

    $16.99

  • Komos - Plastic Faucet Spout Cover - Pack of 4 Komos - Plastic Faucet Spout Cover - Pack of 4

    KOMOS® | Beer Faucet Spout Cover | 4-Pack

    Don't let fruit flies invade your you beer taps in between uses. Slip on this rubber cap to keep bugs out and drips off your floor or counter. Pack of 4.

    $5.49

  • Tubing - Reinforced Vinyl (5/8 in) - PLACEHOLDER

    Vinyl Tubing (Reinforced) - 5/8 in.

    Our reinforced vinyl tubing is an excellent option for transfering liquids under 158F that require some pressure resistance. A common application for the reinforced vinyl tubing is the in & out lines to your wort chiller.  This tubing is 5/8" inner diameter, is approved to 158F, and can handle working pressures up to 250 PSI.  

    $9.99 - $399.99

  • 20 PSI Spring for D1830

    Replacement Pressure Relief Spring - 20 PSI

    20 PSI replacement spring for pressure relief valves.  All SS, works with our D1830, as well as a replacement for our Counter Pressure Bottle Fillers.

    $3.59

  • KOMOS Keg Coupler - D-Style Sanke Coupler - Pull Style Handle - Stainless Steel KOMOS Keg Coupler - D-Style Sanke Coupler - Pull Style Handle - Stainless Steel

    KOMOS® D-Style Keg Coupler | Sanke Beer Tap | Stainless Steel Body & Probe | PRV | Gas Barb Included

    Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this item to you when we receive more in late July. Standard D-Style keg coupler works with virtually all American-made commercial beer sanke kegs Durable stainless steel construction ensures longevity and corrosion resistance for both the coupler body and keg probe Easy pull-style lever handle simplifies keg connection and disconnection for user convenience Includes 3/8" OD barb for gas inlet The KOMOS D-Style Keg Coupler is your reliable choice for dispensing standard American sanke kegs. Enjoy the peace of mind that comes with a robust, stainless steel construction, including the coupler body and keg probe, ensuring lasting durability and resistance to corrosion. The D-Style beer tap is the most commonly-used keg coupler in the U.S. The intuitive pull-to-engage lever handle makes connecting and disconnecting a breeze. An included 3/8" OD barb simplifies gas inlet setup, and the built-in pressure relief valve adds a layer of safety. This D-style coupler, the industry standard, is compatible with virtually all American-made commercial draft beer sanke kegs. The upgrade to 304 stainless steel from nickel-plated options provides a significant increase in lifespan, ensuring years of use. For a complete setup, tail piece, hex nut, and gasket for the beer outlet are sold separately and are available in a variety of sizes and styles.  

    $37.99

  • Duotight - 8mm (5/16) Female Bulkhead w/ Lock Nut Duotight - 8mm (5/16) Female Bulkhead w/ Lock Nut

    Duotight Push-In Fitting - 8mm (5/16 in.) Female Bulkhead

    This Duotight fitting is designed to go through the wall of a tank, housing, or wall, similar to a pass through shank, so you can run EVABarrier tubing from one side to the other. Compatible with EVABarrier 8 mm OD tubing (D1717 / D1718). With the lock nuts in place, there is approximately 1" of pass through threading. Duotight fittings are high-quality push-in fittings that seal tight and offer superior sealing capacity due to the double O-ring sealing design. High Performance Double O-Ring Design: The secret to Duotight’s superior sealing performance comes from the fact that they use not one, but two high-quality EPDM O-rings. The double O-ring means they have literally twice the sealing surface when compared with other push-in fittings. This makes them more reliable and significantly reduces the chance of leakage. The double O-ring system also means that tubing can be bent at a much tighter radius without causing leaking issues, which can be an issue with other fittings. This combination of factors makes Duotight the most reliable push-in fittings on the market. EPDM offers excellent chemical resistance for a longer life span. When compared with silicone and vinyl, EPDM has much better gas transmission rates, better wear resistance, and is BPA-free. No Clamps Necessary! We recommend cutting your tubing straight, not on an angle, to ensure the line forms a complete seal. To remove the fitting simply push in the collet and the hose can be removed. Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. KegLand Part Number: KL21036

    $3.89

  • Beer Line/Tubing Gasket - Tail Piece Gasket

    Tailpiece Gasket

    5 reviews

    With this perfect-fit replacement gasket for your draft equipment, you’ll never have to experience the frustration of trying to “rig it” again.    This molded rubber beer line gasket is used anywhere you are mounting a tailpiece. It is placed between the tailpiece and the beer taps and/or shank.

    $1.19

  • Komos - Regulator Gasket - Pack of 4 Komos - Regulator Gasket - Pack of 4

    KOMOS® | CO2 Regulator Gasket | Fiber Washer | 4-Pack

    This compression style fiber washers are a must if you use regulator that requires a gasket change everytime you change the tank. Comes in a convenient zip lock bag. NOTE: These are not intended for use with the KOMOS CO2 Regulator. For the correct KOMOS Regulator replacement gasket, please see D1089.

    $1.69

  • 74g Cartridge Adaptor for KegLand Core 360 Mini CO2 Regulator (TR21-4 Male x 5/8-18UNF Female) 74g Cartridge Adaptor for KegLand Core 360 Mini CO2 Regulator (TR21-4 Male x 5/8-18UNF Female)

    74g Cartridge Adapter for KegLand Core 360 Mini CO2 Regulator

    This adapter can be installed on the Core 360 Mini Regulator from Kegland in order to use 74 gram CO2 cartridges. Use a crescent wrench to remove the stock adapter piece for 12 gram cartridges and simply screw in this adapter with 5/8-18 UNF female threading. Switching to 74 g cartridges will allow you dispense 1-4 Cornelius kegs, depending on how it is used and the CO2 consumption required. TR21-4 Male Thread x 5/8-18 UNF Female Thread Adapter only. Regulator and CO2 cartrdige sold separately. KegLand Part Number: KL2041

    $5.49

  • Faucet Shank - 4-1/8 in Stainless with Nut & Nipple Faucet Shank - 4-1/8 in Stainless with Nut & Nipple

    Beer Faucet Shank | 4" | 304 Stainless Steel | Includes Plastic Collar

    13 reviews

    Serious homebrewers want only the best hardware touching their brew to prevent “off” flavors. This beer faucet shank is made from high quality 304 stainless steel.    This shank is sold as a complete kit and ready to install--just add tubing and a hose clamp. It comes with a back nut, plastic collar, hex nut, and a 1/4" barb. Requires a 1" hole saw for installation. Due to the length of the back nut and collar, the total wall width the shank can bridge once installed is about 2 3/4". Dimensions: 5-1/4" - Total Length (Tip to Tip) 4-1/4" - Shank Length (Without Nut & Nipple) 3" - Thread Length 2-3/4" - Pass Through Length  

    $27.49

  • Plastic Wrap Around Drip Tray Plastic Wrap Around Drip Tray

    Drip Tray - 15 in. Wrap Around

    22 reviews

    Keep your counter or kegerator clean with this affordable wrap around drip tray. Fits well with 3" diameter towers, with room to fit snug up to the bottom collar. Removable grill for easy cleaning. This is a direct replacement of the drip tray that comes with our kegerators. Countertop design with feet Honeycomb pattern removable grill Half-moon cut out measures 4.5" across and 2-3/8" deep Dimensions: 15" L x 10" W x 0.75" H Made from ABS plastic Kegland Part Number: KL00192

    $14.49

  • KOMOS Stainless Tower Kit (Without Faucets) - TOWER & LINE KIT - PLACEHOLDER KOMOS Stainless Tower Kit (Without Faucets) - TOWER & LINE KIT - PLACEHOLDER

    KOMOS® Brushed Stainless Draft Tower Kit

    Due to high demand, some of these items are currently out of stock but available for pre-order. Please check status notes below when selecting a size option to see if it is In Stock or tagged as PreBook. We will automatically ship this to you when we receive more inventory.   Nothing looks quite as nice as beer pouring out of a shiny stainless steel draft tower. These are the same tower kits included with the KOMOS Kegerator. Includes EVABarrier draft tubing and Duotight push-to-connect fittings for easy assembly. These towers can be purchased without faucets, or you can choose your preferred faucets from the add-on options above. The tower is made from 304 brushed stainless steel, making them corrosion resistant while also looking great! Duotight Fittings & EVABarrier Draft Tubing Duotight and EVABarrier have revolutionized how you connect draft line, and our tower kits come standard with both. We love Duotight push-in fittings for their quick connection, reliable seal, and versatility. Setting up and connecting draft line has never been easier -- no more hose clamps or heating water to soften tubing! Each tower comes with Duotight fittings for the tower shanks and for splitting gas lines (double & triple tap only). We recommend adding Duotight fittings to use for your keg connections as well. Depending on whether you'll be serving from homebrew kegs or commercial sanke kegs, you'll need two DUO106 or two DUO104 per line. EVABarrier tubing has been engineered with protection in mind and is both PVC-free and BPA-free. This double walled tubing offers superior protection against oxidation, CO2 loss, and microbial growth. EVA tubing is the future of draft line for professional applications, and now your kegerator will feature the same first-class tubing. Includes: Stainless steel draft tower Stainless steel faucet shank(s) with Duotight tailpieces EVABarrier gas and beverage tubing Draft tower mounting screws Faucet wrench 1-3 Tap Tower Dimensions: 13.4 in. tall (without faucets) 3 in. tower diameter 4.4 in. base diameter 4 Tap Tower Dimensions: 15.75 in. tall (without faucets) 4.5 in. tower diameter Interior mounting holes (does not include bottom collar)   Please note: Perlick Flow Control faucets are not compatible with the included Intertap tower shanks.  

    $69.99 - $139.99

  • KOMOS Keg Coupler - D-Style Sanke Coupler with PRV (Stainless) KOMOS Keg Coupler - D-Style Sanke Coupler with PRV (Stainless)

    KOMOS® Stainless Steel Sanke Keg Beer Tap - D-Style Keg Coupler (With PRV)

    3 reviews

    The KOMOS D-Style coupler is built for use with the most common commercial sanke kegs sold in the USA. Featuring stainless steel body and stainless steel probe, this keg tap is made to last. The coupler comes without fittings so it can be adapted however you sees fit. When assembling, insert the rubber "duck bill" check valve into the side gas-in port. The check ball and ball retainer are placed in the top beverage-out port. Both gas-in and bev-out ports come bare so you can fit it out exactly how you want it. Maybe you like a larger gas line and smaller beer line—no problem. Or perhaps you're ready to take your draft system into the 21st century with EVABarrier draft tubing and Duotight push-to-connect fittings. Whatever floats your boat, keep your draft setup anchored with the KOMOS keg coupler. The Green corny keg-style PRV is rated to 4.5 BAR (65 psi). It can be swapped out with PRVs with a higher or lower pressure rating if desired. Always check the pressure rating of your keg before swapping PRVs.  

    $44.99

  • Stainless Ball Valve for Keg Couplers - Male & Female Beer Thread (5/8 in. BSP) Stainless Ball Valve for Keg Couplers - Male & Female Beer Thread (5/8 in. BSP)

    Stainless Ball Valve for Couplers & Shanks

    1 review

    This ball valve with male and Female Beer Thread (5/8" BSP) is incredibly handy for those wanting to shut off flow of liquid and gas lines on keg couplers or shanks. Highly recommended if you are disconnecting your coupler and not re-attaching to another keg immediately. Made from 304 stainless steel. Kegland Part number: KL00406

    $27.49

  • Duotight - 6.35mm (1/4) OD - Retaining Circlip - 10 Pack Duotight - 6.35mm (1/4) OD - Retaining Circlip - 10 Pack

    Retaining Circlip for Duotight Push-In Fittings - Pack of 10 - 6.35 mm (1/4 in.)

    Duotight 6.35 mm OD retaining clip. Locks Duotight fittings in their closed position, making it impossible for any hose to escape. Pack of 10. KegLand Part Number: KL21937

    $4.39


You have seen 144 out of 464 products

Login

Forgot your password?

Don't have an account yet?
Create account