This chrome plated Draft Beer Faucet will keep your bar or kegerator looking great for years to come.
Industry standard faucet for draft beer that fits North American shanks and towers
Chrome Plated Brass body with quick action brass lever
Specifications:
Body Thread: 1 1/8” – 18 Thread (North American Beer Industry Standard)
Lever Thread: 3/8” – 16 UNC (Unified Coarse Thread); FIts standard tap handles.
Chrome Plated Brass Body
Brass Lever
This highly concentrated form of White Labs Ultra Ferm is intended for professional breweries. The dosage rate is 2.5mL per 31 gallons.
Reduce saccharification time, break down starches in unmalted cereals, and increase attenuation with one simple product! Ultra-Ferm from White Labs is a highly concentrated liquid amyloglucosidase derived from a select strain of Aspergillus niger. Rather than acheiving 75 to 80% hydrolisis of present starches, as you would with traditional brewing methods, Ultra Ferm allows total hydrolisis of dextrins to fermentable glucose, from all types of starch.
UltraFerm WLN4100 makes for the perfect additive when brewing a Brut IPA or Champagne Beer by eliminating residual sugar, allowing you to acheive the dry flavor profile that is signature to the style. It can also be used for the production of low calorie and extra high-alcohol beers, as well as light or diatetic beers.
Add at the beginning of the mash-in. Ultra-Ferm optimal pH is between 3.5 and 5.5. Temperature should not exceed 140°F. Amyloglucosidase activity is completely destroyed when the wort is held at 185°F for 10 minutes.
We've experimented with adding this enzyme at different stages throughout the brewing process, and found that it isn't limited to the mash stage alone. When pitching Ultra Ferm alongside our yeast, we were able to achieve a final gravity of 1.000, with no negative effect on the finished beer. Great news for the extract brewers out there that want to produce an extra dry beer!
Store at 39-46°F. Stable for 12 months.
Azacca® is a new hop from Washington that has great aromatic qualities making it great at late or dry hop additions. The aroma has sustained citrus and mango notes with a little orchard fruit. The high myrcene fraction makes this hop great in IPAs. Also with its high acid content, Azacca® can be used at the start of a boil to great affect.
Hop Statistics:
Alpha Acids: 14 – 16%
Beta Acids: 4.0 – 5.5%
Alpha-Beta Ratio: 2.55 – 4
Cohumulone: (% of alpha acids): 38 – 45%
Total Oils in mls per 100 grams dried: 1.6 – 2.5
Storage(% alpha acids remaining after 6 months storage at 68° F): N/A
Similar Hop Varieties: N/A
Azacca® is a registered trademark owned by American Dwarf Hop Association, LLC
Galena is a classic American hop that was been used in many quintessential craft beers. Galena features great bittering with neutral character. Medium, pleasant hoppiness. Strong, somewhat floral, pleasant aroma. We use this hop quite a bit in an assortment of styles.
MoreBeer! & Galena - a little fun history
Galena was the original bittering hop we used in most of our kits thought the 90's. We later switched to using Magnum but many of our original customers still really like this hop. Regan Dillon, MoreBeer!'s second customer and later partner, was a big champion of this variety through the 1980's and 1990's. Regan still loves this hop so if you happen to run into Regan at our Concord store or at a festival you can become instant friends by saying "Man, I don't know why Galena isn't used more!"
Typical usage: High Alpha hop
Aroma: Mild citrus aroma
Alpha acids: 13.0-15.0%
Beta acids: 7.5-8.5%
Cohumulone: 34-39%
Total Oil: 1.3-2.1 ml/100g
Myrcene: 40-50%
Humulene: 11-17%
Country of origin: USA
These hops are far out, man! Named after Rock and Roll Hall of Famer, Frank Zappa, this neomexicanus breed was first found in the mountains of New Mexico and later developed by CLS Farms. As wild and free as the music Frank composed, Zappa™ hops are tough to nail down with any singular description. Tropical fruit, pine, and citrus first come to mind, but descriptors such as passionfruit, mint, fresh, purple, savory, impulsive, and fruity pebbles have also been used in an attempt to capture the essence of Zappa™. Use for aroma, whirlpool, and dry hopping additions. Highly recommended for fruit-forward styles like hazy or milkshake IPAs, as well as fruited sours, pale ales, and wild or mixed-fermentation beers.
Hop Statistics
Alpha Acids: 6-8%
Beta Acids: 8-9%
Alpha-Beta Ratio: 0.6 - 1.0
Cohumulone: (% of alpha acids): 40-45%
Total Oils in mls per 100 grams dried: 1.8 - 2.5%
Zappa™ is a trademark owned by The Trustees of the Zappa Family Trust Administrative Trust Zappa
Our Single Hop Experiment series is the perfect way to learn the characteristics of individual hop varietals
Includes a small bittering addition of Magnum and three 2 oz additions of your chosen hop for late boil and at dry hopping
Estimated ABV: 5%
Estimated IBUs: 35
Makes 5 gallons of finished beer
We recently had a simple, yet exciting idea: What if we brewed the same recipe, used the same yeast, but changed one thing - the flavor, aroma, and dry hop additions using one hop varietal. That way we could take two beers that are close to identical and pick out the differences in just the hop flavors and aromas! And thus, the Single Hop Experiment was born. This recipe is based off of a simple Pale Ale: Ultralight malt extract, Crystal 15L, Magnum bittering hops, and then a single other hop for the rest of the additions. The malt in this recipe is basic and fairly neutral, the bittering clean and consistent, but the flavor and aroma from the late hop additions will vary; sometimes dramatically! Ever wanted to know what your favorite hop really is? Brew a few of these different Single Hop Experiment recipes to find out!
Estimated Original Gravity:1.049-54
SRM (Color Range): 7-8
IBU's: 35
Estimated Alcohol Percentage: 5%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All included steeping grains will come milled.
Liquid Malt Extract (LME) vs. Dried Malt Extract (DME)
MoreBeer! recipe kits are offered in both Liquid Malt Extract and Dry Malt Extract so that our customers can choose the format that best suits their needs and brewing style. LME is a viscous liquid, similar in consistency to maple syrup. In addition to being the more affordable option, many brewers find LME easier to handle than dry extract. DME is more condensed and comes in a powder format that is similar to baking flour. Although it’s a little more costly, DME is naturally lighter in color and stays fresher for longer. We highly recommend DME when brewing light colored beers.
Lemon peel is the outer skin of the citrus fruit of the same name, which is technically referred to as the exocarp. The peel actually consists of two components the flavedo and the outer white pith of the rind. Because the peel is where the essential oils of the fruit reside, it retains robust flavor, even when dried.
Keep the party flowin' with a KOMOS Jockey Box! The eye-catching stainless steel exterior isn't the only thing that distinguishes this beauty from ordinary jockey boxes. With forward-sealing Intertap faucets and all-stainless 50-foot draft coils, the KOMOS Jockey Box was designed from the ground up to keep your beer pouring with less foam for longer.
KOMOS Stainless Steel Jockey Box
Designed and manufactured for the craft beer industry!
100% stainless steel draft coils, shanks and faucets -- beer never touches anything but stainless
Custom designed shanks and coils ensure your beer cools properly and pours flawlessly
The only draft box that uses stainless steel Intertap forward sealing faucets
Push-In coil design applies force toward shank connection to protect against shank and coil separation
Sturdy stainless steel shank plates protect the cooler from being damaged from adjusting and tightening faucets and shanks
Stainless Steel construction on all serving components means this box will serve beer for years
Premium Stainless Steel Cooler provides superior ice retention
Pair this box with a KOMOS Connection Kit for everything you need to easily hook up your commercial or homebrew kegs and get pouring!
Features:
54 Quart Stainless Steel Cooler
2 x 50’ Stainless Steel Coils (5/16” OD)
2 x Stainless Steel Faucet Shanks
2 x Stainless Steel Pass Through Shanks
2 x Stainless Steel Flanges
2 x Stainless Steel Forward Sealing Faucets
2 x Black Tap Handles
4 x Stainless Steel Shank Plates (inner & outer)
Jockey Box Specs:
25" L x 18" W x 17.75" H
32.5 lbs
Our Single Hop Experiment series is the perfect way to learn the characteristics of individual hop varietals
Includes a small bittering addition of Magnum and three 2 oz additions of your chosen hop for late boil and at dry hopping
Estimated ABV: 5%
Estimated IBUs: 35
Makes 5 gallons of finished beer
We recently had a simple, yet exciting idea: What if we brewed the same recipe, used the same yeast, but changed one thing - the flavor, aroma, and dry hop additions using one hop varietal. That way we could take two beers that are close to identical and pick out the differences in just the hop flavors and aromas! And thus, the Single Hop Experiment was born. This recipe is based off of a simple Pale Ale: 2-Row, Crystal 15L, Magnum bittering hops, and then a single other hop for the rest of the additions. The malt in this recipe is basic and fairly neutral, the bittering clean and consistent, but the flavor and aroma from the late hop additions will vary; sometimes dramatically! Ever wanted to know what your favorite hop really is? Brew a few of these different Single Hop Experiment recipes to find out!
Estimated Original Gravity:1.049-54
SRM (Color Range): 7-8
IBU's: 35
Estimated Alcohol Percentage: 5%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts.
Quickly and easily connect and disconnect your brew tubing from kettles, pumps and fermenters without fiddling with hose clamps or trying to muscle the tubing on and off of barbed fittings!
There’s no need to put in a lot of work connecting when using this MPT Stainless Steel Male Quick Disconnect with the female QD, as they seal-up quickly. This part works well with any of our H503 and H507 series of quick disconnects, but should only be used with other 304 stainless steel models. Features a 1/2" Male National Pipe Thread on the outer ends that offers easy connectivity to just about anything.
The quick disconnect will hold pressure for most brewing applications if you plan on moving liquids at 60psi or less. 1/2" ID. Take note this is an open port model with no shut-off.
We designed the original stainless QD's for the brewing industry over a decade ago, and have been using the same reliable manufacturer ever since. Our design has certainly been imitated but has never duplicated at the same quality level. It’s no surprise MoreBeer! Stainless QD fittings have an almost unanimous 5 star customer rating!
Made by MoreBeer! from 304 stainless steel.
Please Note: This product does NOT work with our Brass or Plastic Quick Disconnects.
Force carbonate and dispense from your KegLand Mini Keg
Equipped with Gas-In and Bev-Out keg posts for quick and easy attachment of ball lock disconnects
Features a flexible silicone dip tube that draws liquid from the bottom, allowing you to serve from your mini keg whether it's upright or on its side
Includes a 35 PSI pressure relief valve (PRV) for safe and controlled carbonation and dispensing
Force carbonate and serve from your KegLand Mini Keg with the Ball Lock Tapping Head. The Tapping Head features Gas-In and Bev-Out keg posts and PRV rated to 35 PSI. The flexible silicone dip tube will sink and draw liquid from the bottom of the keg, allowing you to dispense from the keg whether it's standing upright or lying on its side, whichever orientation is more convenient for your refrigerator or cooler.
The Tapping Head will add approximately 2.5" to the overall height of your Mini Keg, not including the additional height of your Bev-Out Ball Lock QD. For a more compact dispensing solution, see the Low Profile Tapping Head.
Please Note: The dip tube is designed to fit all Mini Kegs, including the largest 10L size. If using a smaller size keg, we recommend cutting the dip tube to the appropriate length so it doesn't bunch up at the bottom of the keg.
KegLand Part Number: KL06972
Waimea hops are a new favorite from the Southern Hemisphere, and demonstrate excellent bittering and aroma potential! Featuring huge pine and citrus character, including intense tangelo, this has become a new favorite amongst craft brewers. Due to the high alpha acids and impressive oil content, this is a superior dual purpose hop. Throw some Southern Hemisphere in your next beer!
Hop Statistics:
Alpha Acids: 16 – 19%
Beta Acids: 7 – 9%
Cohumulone: (% of alpha acids): 22 – 24%
Total Oils in mls per 100 grams dried: 2.0 – 2.2
Official BJCP Collaboration: Developed in direct partnership with the Beer Judge Certification Program to support their comprehensive training and examination standards for aspiring and professional judges.
Precision Liquid Spiking: Features stable liquid flavor compounds in convenient vials, designed to easily "spike" 1 liter of beer for accurate flavor recognition and taster calibration.
Essential Evaluation Tool: Provides the most critical and common flavor compounds encountered in beer styles, making it an ideal resource for homebrew groups, exam prep classes, and professional panels.
Beer Judge Kit Sensory Training Kit
The Beer Judge Kit Sensory Training Kit was developed in conjunction with the Beer Judge Certification Program specifically to support their comprehensive beer judge training and examination program. This kit is an essential tool for those looking to sharpen their judging and flavor recognition skills, providing the most common and critical flavor compounds encountered during the evaluation of beer styles.
Each vial of the kit contains a specific flavor compound in a stable liquid form, allowing for easy "spiking" of 1 liter of beer. This format ensures taster calibration across homebrew groups, exam prep classes, and professional judging panels.
Visit the Siebel Sensory Station YouTube channel for a complete library of instructional and tasting videos.
Flavors Included:
Acetaldehyde – green apple, cut grass
Butyric acid – putrid, baby vomit
D.M.S. – cooked corn, cooked vegetables
Diacetyl – butter, butterscotch
Earthy – geosmin, soil-like
Ethyl acetate – solvent-like, nail polish remover
Ethyl hexanoate – aniseed, apple or liquorice
Geraniol – floral, geranium flowers
Indole – farm, barnyard
Isovaleric acid – cheesy, old hops, sweaty socks
Papery – cardboard, oxidized
Spicy – cloves, allspice
Our Single Hop Experiment series is the perfect way to learn the characteristics of individual hop varietals
Includes a small bittering addition of Magnum and three 2 oz additions of your chosen hop for late boil and at dry hopping
Estimated ABV: 5%
Estimated IBUs: 35
Makes 5 gallons of finished beer
We recently had a simple, yet exciting idea: What if we brewed the same recipe, used the same yeast, but changed one thing - the flavor, aroma, and dry hop additions using one hop varietal. That way we could take two beers that are close to identical and pick out the differences in just the hop flavors and aromas! And thus, the Single Hop Experiment was born. This recipe is based off of a simple Pale Ale: 2-Row, Crystal 15L, Magnum bittering hops, and then a single other hop for the rest of the additions. The malt in this recipe is basic and fairly neutral, the bittering clean and consistent, but the flavor and aroma from the late hop additions will vary; sometimes dramatically! Ever wanted to know what your favorite hop really is? Brew a few of these different Single Hop Experiment recipes to find out!
Estimated Original Gravity:1.049-54
SRM (Color Range): 7-8
IBU's: 35
Estimated Alcohol Percentage: 5%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts.
Our Single Hop Experiment series is the perfect way to learn the characteristics of individual hop varietals
Includes a small bittering addition of Magnum and three 2 oz additions of your chosen hop for late boil and at dry hopping
Estimated ABV: 5%
Estimated IBUs: 35
Makes 5 gallons of finished beer
We recently had a simple, yet exciting idea: What if we brewed the same recipe, used the same yeast, but changed one thing - the flavor, aroma, and dry hop additions using one hop varietal. That way we could take two beers that are close to identical and pick out the differences in just the hop flavors and aromas! And thus, the Single Hop Experiment was born. This recipe is based off of a simple Pale Ale: 2-Row, Crystal 15L, Magnum bittering hops, and then a single other hop for the rest of the additions. The malt in this recipe is basic and fairly neutral, the bittering clean and consistent, but the flavor and aroma from the late hop additions will vary; sometimes dramatically! Ever wanted to know what your favorite hop really is? Brew a few of these different Single Hop Experiment recipes to find out!
Estimated Original Gravity:1.049-54
SRM (Color Range): 7-8
IBU's: 35
Estimated Alcohol Percentage: 5%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts.
20 °L - Briess Malting - A medium Belgian Crystal malt that provides a slight toasty flavor and residual caramel sweetness. Caramel Vienne (also known as Caravienne) is commonly used by Belgian breweries in producing Abbey or Trappist style ales. Caravienne and Caramunich have a different flavor contribution than the Crystal malts listed above. Some describe the flavor as slightly toffeeish.
With your own Nitrogen tank, you can add Nitro-Draft capability to your Home Dispense System!
Serve beer on Nitro! The best way to pour your favorite stouts and porters!
Made from high-quality aluminum that will never rust like steel tanks
Fill with Beer Gas Mix to get that alluring, cascading pour famously associated with Guinness
CGA580 valve pairs with standard US-style nitrogen & argon gas regulators
KOMOS® offers a full suite of first-rate draft products and draft fittings—from kegs to faucets and everything in between!
Use pure nitrogen to serve still wine, cold brew coffee, Sangria and premixed cocktails on draft
Brand new aluminum 22 cubic feet Nitrogen tank made from high strength aluminum alloy and high quality CGA580 valves. Because it is made of aluminum rather than steel you can feel confident that it won’t rust. It can be filled with compressed (liquified) Nitrogen, Argon, or Beer Gas Mix (70% Nitro/30% CO2).
Fill with beer gas mix (70% Nitrogen/30% CO2) for dispensing beers "On Nitro". Using 100% Nitrogen is also the recommended gas for dispensing cold brew coffee, wine, or even Sangria and premixed cocktails on draft!
Aluminum tanks are superior to steel because they do not rust. All tanks are shipped empty. To have tanks filled you will want to visit your local welding supply shop. Because you are purchasing a new tank you can choose to either have it filled or to exchange it for a filled tank at your local gas supplier. If you have this tank filled the local gas supplier is responsible for affixing the correct neck label that identifies the gas being put in the cylinder.
Tanks should always be stored in an upright position.
Features:
Made from corrosion resistant, engineered Aluminum
Brushed finish
Thick, durable cylinder walls
DOT approved
New high quality CGA-580 valve
Light weight compared to steel tanks
Rated to 2216 PSI service / 3360 PSI test pressure PSI (allowing for Nitrogen fill)
Can also be filled with Argon or Beer Gas Mix (Nitrogen/CO2)
NOTE: You will need at Nitrogen/Argon Regulator to go with this tank, a standard CO2 regulator will not work.
Clean multiple beverage draft lines in a single loop using this Ball Lock Keg Jumper Post. Makes cleaning your kegerator or keezer a breeze without the need to remove your quick disconnects. This double ended keg post does not have a spring & poppet. It just has a piece of bar that activates the ball lock disconnect wide open.
Please note it is a single piece that cannot be undone from the middle.
KegLand Part Number: KL20152
This is the kit for those who have an extra refrigerator and want draft beer on tap, but either can't drill a hole in the refrigerator or would like to save almost $60 when compared to the deluxe kit. We include a hand held beer line assembly instead of a faucet, shank, and drip tray.
Kit Includes:
New Aluminum CO2 tank
Dual gauge regulator
Hand held beer line assembly
Sanke keg valve tap
All hoses and clamps
Our Single Hop Experiment series is the perfect way to learn the characteristics of individual hop varietals
Includes a small bittering addition of Magnum and three 2 oz additions of your chosen hop for late boil and at dry hopping
Estimated ABV: 5%
Estimated IBUs: 35
Makes 5 gallons of finished beer
We recently had a simple, yet exciting idea: What if we brewed the same recipe, used the same yeast, but changed one thing - the flavor, aroma, and dry hop additions using one hop varietal. That way we could take two beers that are close to identical and pick out the differences in just the hop flavors and aromas! And thus, the Single Hop Experiment was born. This recipe is based off of a simple Pale Ale: Ultralight malt extract, Crystal 15L, Magnum bittering hops, and then a single other hop for the rest of the additions. The malt in this recipe is basic and fairly neutral, the bittering clean and consistent, but the flavor and aroma from the late hop additions will vary; sometimes dramatically! Ever wanted to know what your favorite hop really is? Brew a few of these different Single Hop Experiment recipes to find out!
Estimated Original Gravity:1.049-54
SRM (Color Range): 7-8
IBU's: 35
Estimated Alcohol Percentage: 5%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All included steeping grains will come milled.
Liquid Malt Extract (LME) vs. Dried Malt Extract (DME)
MoreBeer! recipe kits are offered in both Liquid Malt Extract and Dry Malt Extract so that our customers can choose the format that best suits their needs and brewing style. LME is a viscous liquid, similar in consistency to maple syrup. In addition to being the more affordable option, many brewers find LME easier to handle than dry extract. DME is more condensed and comes in a powder format that is similar to baking flour. Although it’s a little more costly, DME is naturally lighter in color and stays fresher for longer. We highly recommend DME when brewing light colored beers.
A mild, low-bitterness, smooth beer for easy, frequent drinking. The perfect summer time thirst quencher! Because of it’s clean, mild profile, this beer is an excellent candidate for incorporating fruit extracts, flavorings or other ingredients to customize your brew!
Color/Body: Blond/Light
Bitterness: Low
Estimated Alcohol: 3.8%
Create your own custom-fit gas line with this 1/4" ID Tubing.
This diameter of tubing will give you an extra-tight fit gas line, particularly with homebrew quick disconnects. Simply soak the 1/4" line in hot water before attaching to larger 5/16" fittings. It is also well suited for beer lines that are 10-25' in length.
Technical Specifications: 1/2" Outer Diameter. 1/4" line provides .65 lbs of restriction per foot. Ideally pounds of resistance should equal pounds of applied pressure. 1/4" line holds 1/3 of an ounce per foot. Made from PVC.
Control beverage flow as liquid leaves the keg—replaces the need for flow control faucets or compensators downstream
Perfect for mobile draft applications when you can't balance your lines on the fly
Made from stainless steel for high-durability
Black ring above the outer bushing to identify the QD for beverage use
Compatible with all ball lock style homebrew kegs
1/4" flare thread connection
Pick up this Flow Control Ball Lock Disconnect and stop banging your head against the wall trying to balance your draft line. We're all after the same thing -- the perfect pour -- but balancing beer lines can be a daunting task. You do the research and crunch the numbers, choose the right inner diameter line, cut it to the ideal length, only to spend your evenings dialing your regulator setting back and forth like a turtle-necked safecracker. This stainless steel flow control disconnect will eliminate the guess work and fast track you to perfectly pouring beer.
Flow control faucets are a popular option but they're inherently flawed due to the point of restriction being at the very end of the beer line. The flow control apparatus inside the faucet causes turbulence, which leads to foaming and carbonation coming out of solution prematurely. Flow control disconnects on the other hand restrict the flow before the beer enters the beer line so the head pressure created by the beer line keeps the carbonation in solution.
Another advantage of FC disconnects is that you don't have to rely on a small inner diameter or long line length to apply flow resistance. In fact, even in the fully open position the disconnect will provide some inherent flow resistance, so you should use a shorter line than the 5-6 ft. length that is typically recommended. This makes the flow control disconnect ideal for dispensing beer on the go where you might have a picnic tap with a short line or a disconnect faucet adapter with no line at all!
Please note: make sure your keg post o-rings are in good condition before using this fitting. If they are overly worn and you are not getting a good seal, replace the post o-ring then re-attach the ball lock fitting.
Kegland Part Number: KL09041
Serve beer on tap at home! A quality CO2 tank is a core component to any home draft system.
Fill at a local welding shop or swap out for a full tank at your local homebrew shop
Made from high-quality aluminum that will never rust like steel tanks
Dispense 18 x five-gallon kegs of homebrew
Go with the larger 10 lb CO2 tank and extend the time between needing to refill or swap for a full tank
This brand new, 10 lb aluminum CO2 tank ships free in the 48 contigous states, and because it is made of aluminum rather than steel you can feel confident that it will never rust. It’s called a 10 lb tank because it holds 10 lb of compressed (liquified) CO2. 10 lb of CO2 is enough to dispense 18 five gallon kegs of homebrew.
All new CO2 tanks are shipped empty and will require either filling or exchanging for a full tank. Most local homebrew shops will stock gas to exchange, and many local welding supply companies can fill tanks on site.
Dimensions: 20.75" Tall x 7" wide.
NOTE: CO2 tanks should always be stored in an upright position.
These chrome plated tap handles are an excellent upgrade for any kegerator setup. So sleek! So shiny. The perfect mate for any chrome plated or stainless steel draft faucet.
2-5/8" tall. 7/8" wide at the top of the knob.
Kegland Part number: KL01373
Our Single Hop Experiment series is the perfect way to learn the characteristics of individual hop varietals
Includes a small bittering addition of Magnum and three 2 oz additions of your chosen hop for late boil and at dry hopping
Estimated ABV: 5%
Estimated IBUs: 35
Makes 5 gallons of finished beer
We recently had a simple, yet exciting idea: What if we brewed the same recipe, used the same yeast, but changed one thing - the flavor, aroma, and dry hop additions using one hop varietal. That way we could take two beers that are close to identical and pick out the differences in just the hop flavors and aromas! And thus, the Single Hop Experiment was born. This recipe is based off of a simple Pale Ale: Ultralight malt extract, Crystal 15L, Magnum bittering hops, and then a single other hop for the rest of the additions. The malt in this recipe is basic and fairly neutral, the bittering clean and consistent, but the flavor and aroma from the late hop additions will vary; sometimes dramatically! Ever wanted to know what your favorite hop really is? Brew a few of these different Single Hop Experiment recipes to find out!
Estimated Original Gravity:1.049-54
SRM (Color Range): 7-8
IBU's: 35
Estimated Alcohol Percentage: 5%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All included steeping grains will come milled.
Liquid Malt Extract (LME) vs. Dried Malt Extract (DME)
MoreBeer! recipe kits are offered in both Liquid Malt Extract and Dry Malt Extract so that our customers can choose the format that best suits their needs and brewing style. LME is a viscous liquid, similar in consistency to maple syrup. In addition to being the more affordable option, many brewers find LME easier to handle than dry extract. DME is more condensed and comes in a powder format that is similar to baking flour. Although it’s a little more costly, DME is naturally lighter in color and stays fresher for longer. We highly recommend DME when brewing light colored beers.
This is premium beverage tubing that stays flexible even when cold. We use to sell a less expensive tubing but we were not satisfied with the performance on our own draft systems. We think it is definitely worth the little extra cost.
3/16" is the best size for most beer lines under 9' in length. Ideally, 5' provides the correct restriction for serving beer in the 8-14 psi range.
Technical Specifications: 3/16" line provides 2.2 lbs of restriction per foot. Ideally pounds of resistance should equal pounds of applied pressure. 3/16" line holds 1/6 of an ounce per foot. Made from PVC. 7/16" OD
Our Single Hop Experiment series is the perfect way to learn the characteristics of individual hop varietals
Includes a small bittering addition of Magnum and three 2 oz additions of your chosen hop for late boil and at dry hopping
Estimated ABV: 5%
Estimated IBUs: 35
Makes 5 gallons of finished beer
We recently had a simple, yet exciting idea: What if we brewed the same recipe, used the same yeast, but changed one thing - the flavor, aroma, and dry hop additions using one hop varietal. That way we could take two beers that are close to identical and pick out the differences in just the hop flavors and aromas! And thus, the Single Hop Experiment was born. This recipe is based off of a simple Pale Ale: Ultralight malt extract, Crystal 15L, Magnum bittering hops, and then a single other hop for the rest of the additions. The malt in this recipe is basic and fairly neutral, the bittering clean and consistent, but the flavor and aroma from the late hop additions will vary; sometimes dramatically! Ever wanted to know what your favorite hop really is? Brew a few of these different Single Hop Experiment recipes to find out!
Estimated Original Gravity:1.049-54
SRM (Color Range): 7-8
IBU's: 35
Estimated Alcohol Percentage: 5%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All included steeping grains will come milled.
Liquid Malt Extract (LME) vs. Dried Malt Extract (DME)
MoreBeer! recipe kits are offered in both Liquid Malt Extract and Dry Malt Extract so that our customers can choose the format that best suits their needs and brewing style. LME is a viscous liquid, similar in consistency to maple syrup. In addition to being the more affordable option, many brewers find LME easier to handle than dry extract. DME is more condensed and comes in a powder format that is similar to baking flour. Although it’s a little more costly, DME is naturally lighter in color and stays fresher for longer. We highly recommend DME when brewing light colored beers.
Our Single Hop Experiment series is the perfect way to learn the characteristics of individual hop varietals
Includes a small bittering addition of Magnum and three 2 oz additions of your chosen hop for late boil and at dry hopping
Estimated ABV: 5%
Estimated IBUs: 35
Makes 5 gallons of finished beer
We recently had a simple, yet exciting idea: What if we brewed the same recipe, used the same yeast, but changed one thing - the flavor, aroma, and dry hop additions using one hop varietal. That way we could take two beers that are close to identical and pick out the differences in just the hop flavors and aromas! And thus, the Single Hop Experiment was born. This recipe is based off of a simple Pale Ale: Ultralight malt extract, Crystal 15L, Magnum bittering hops, and then a single other hop for the rest of the additions. The malt in this recipe is basic and fairly neutral, the bittering clean and consistent, but the flavor and aroma from the late hop additions will vary; sometimes dramatically! Ever wanted to know what your favorite hop really is? Brew a few of these different Single Hop Experiment recipes to find out!
Estimated Original Gravity:1.049-54
SRM (Color Range): 7-8
IBU's: 35
Estimated Alcohol Percentage: 5%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All included steeping grains will come milled.
Liquid Malt Extract (LME) vs. Dried Malt Extract (DME)
MoreBeer! recipe kits are offered in both Liquid Malt Extract and Dry Malt Extract so that our customers can choose the format that best suits their needs and brewing style. LME is a viscous liquid, similar in consistency to maple syrup. In addition to being the more affordable option, many brewers find LME easier to handle than dry extract. DME is more condensed and comes in a powder format that is similar to baking flour. Although it’s a little more costly, DME is naturally lighter in color and stays fresher for longer. We highly recommend DME when brewing light colored beers.
Our Single Hop Experiment series is the perfect way to learn the characteristics of individual hop varietals
Includes a small bittering addition of Magnum and three 2 oz additions of your chosen hop for late boil and at dry hopping
Estimated ABV: 5%
Estimated IBUs: 35
Makes 5 gallons of finished beer
We recently had a simple, yet exciting idea: What if we brewed the same recipe, used the same yeast, but changed one thing - the flavor, aroma, and dry hop additions using one hop varietal. That way we could take two beers that are close to identical and pick out the differences in just the hop flavors and aromas! And thus, the Single Hop Experiment was born. This recipe is based off of a simple Pale Ale: Ultralight malt extract, Crystal 15L, Magnum bittering hops, and then a single other hop for the rest of the additions. The malt in this recipe is basic and fairly neutral, the bittering clean and consistent, but the flavor and aroma from the late hop additions will vary; sometimes dramatically! Ever wanted to know what your favorite hop really is? Brew a few of these different Single Hop Experiment recipes to find out!
Estimated Original Gravity:1.049-54
SRM (Color Range): 7-8
IBU's: 35
Estimated Alcohol Percentage: 5%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All included steeping grains will come milled.
Liquid Malt Extract (LME) vs. Dried Malt Extract (DME)
MoreBeer! recipe kits are offered in both Liquid Malt Extract and Dry Malt Extract so that our customers can choose the format that best suits their needs and brewing style. LME is a viscous liquid, similar in consistency to maple syrup. In addition to being the more affordable option, many brewers find LME easier to handle than dry extract. DME is more condensed and comes in a powder format that is similar to baking flour. Although it’s a little more costly, DME is naturally lighter in color and stays fresher for longer. We highly recommend DME when brewing light colored beers.
Citra® is a registered trademark owned by Hop Breeding Company.
Hang a bag, stainless hop ball, or oak strip from this tab that is welded onto the bottom of a keg lid. This is a product to use for aging your beer on oak cubes, dry hopping, adding cacao nibs - any post-keg addition of ingredients you can think of! To use, simply thread the string of your hop bag into the hole and tie off. When it is time to remove your adjunct/hops, pull the lid off of the keg and replace with a normal one. This really enables you to control the exact time your beer sits on the hops, oak, etc. and makes their removal a cinch!
Kegland Part Number: KL02868
This awesome little fermenter is ideal for any fermentation, up to 2.5 gallons. The unit is designed to be an all in one fermenter and bottling bucket. The bowl shape at the base of the fermentor allows sediment to settle prior to bottling. The wide opening on top allows for easy cleaning, large direct additions of fruit, hops or other products and overall easier access. Cool beer stein styling makes this the freshest fermentor on the market!
Great for splitting 5 gallon batches into two separate fermentation to test yeast, different dry hops, add oak to one, etc.
Use this fermenter for your next batch of fruit wine, half batch of beer or any other fermentation! Holds roughly 2.9 gallons total; recommended for 2.5 gallon fermentations.
Add significant body and mouthfeel while improving head retention in your finished beer
Often used in Witbiers, New England IPAs, Hazy Pales and other specialty beers
Use as up to 40% of your grain bill
For making Witbiers and other specialties. Helps with head retention in all beers. Will leave a slight haze. Can also be used in place of unmalted wheat in many recipes. Adds significant body, mouthfeel and head retention; can be up to 40% of grist.
Clear rock candi sugar from Belgium. Add fermentable sugar without adding color or strong flavors. Use to boost the gravity of Belgian and other beers without adding residual sweetness. Color: 0 degrees Lovibond.
Loosen up your grain bed to prevent stuck mashes and improve wort clarity
Highly recommended for recipes that are adjunct heavy with high amounts of brewing flakes
Imparts no flavor to the finished beer
Use as 5% of the total grain bill
Rice hulls offer a natural, easy way to help prevent a stuck mash! Rice Hulls are used to aid in filterability when you’re doing all-grain brewing with a high percentage of wheat or oats, or if you have had lautering problems. They do not impart any flavor to the finished beer. Use at a percentage not greater than 5% of the total grain bill.
Due to high demand, some of these items are currently out of stock but available for pre-order. Please check status notes below when selecting a size option to see if it is In Stock or tagged as PreBook. We will automatically ship this to you when we receive more inventory.
No Need to Upgrade Later, The X3 Comes Fully Loaded:
Built-in external cooling jacket with 1.5" TC Ports
Neoprene jacket for insulation
Pressure Pack lid with floating dip tube, draft style QD connections for sampling/serving, and an extra 1.5" TC for hop bongs.
The Clear Flex Chamber Bottom Dump allows you to see fermentation, collect and remove trub, and has added ports for purging, oxygenating, carbing and more... so flexible.
Highest quality mirror polish finish inside and out
Welded, ground and polished interior welds are the very highest quality and the ultimate for sanitation
New Features:
Professional 8” Tri-Clamp lid replaces the need for a complicated band clamp to attach the lid
Four crossbar reinforced legs, that flare out, create the most stable base and more access to the front fittings and dump system
Horizontal ports on the cone, just like pro tanks, allowing your racking arm, carbstone, and thermometer to have a horizontal placement in your tank. This allows for smaller minimum batch sizes, better carbonation, and more
3" oversized bottom port and Butterfly Valve with 3” tri-clamp Flex Chamber collection vessel
The new X3 from BrewBuilt sets the new standard for quality. We guarantee that you will love the fit and finish of the X3 Uni Jacketed Conical. Made entirely of 304 stainless steel, with flawless welds and a dazzling mirror-polish finish inside and out that is simply the best. The BrewBuilt X3 Uni is easy to sanitize and even easier on the eyes. It is definitely Instagram worthy! #BrewBuilt
External Cooling Jacket
When it comes to temperature control for a homebrew conical fermenter the holy grail has been an external cooling jacket. Internal cooling coils have long been the answer and while they are simpler to make and relatively inexpensive, they are harder to clean and have issues cold crashing in warm environments. The BrewBuilt X3 Jacketed Conical offers maximum cooling power without any compromise of sanitation.
8” Tri-Clamp Top Port
New to the X3, the 8” Tri-Clamp lid is rock solid and easy to use. The 8” opening allows plenty of space to still get in and clean the inside of the conical by hand if desired. A unique 8”, three-piece, tri-clamp is used to make sealing the top very easy and very secure.
Extra Large 3” T.C. Dump Valve
The largest in the industry. Dry hop to your heart's desire. Try as they might, hopheads will have a hard time clogging this conical. With an oversized 3" bottom port, you’ll have all the clearance you need (and even more than some pro brewers) to drop out your dry hop additions with ease. The slick mirror-polish finish on the inside allows flocculating yeast to collect neatly at the bottom of the cone as they slide right down the smooth interior walls. The butterfly dump valve integrates perfectly with the optional Flex Chamber Collection Jar and Yeast Harvester.
Reinforced Four-Leg Foundation
There’s a common complaint about the tippiness of three-legged units. Three legs may be fine when the fermenter is sitting still on an even surface, but users are often forced to purchase a bracing shelf for more stability if they add casters or leg extensions. A conical is only as worthy as its foundation, so BrewBuilt modeled the X3 after professional-level brewery tanks with a four-leg, reinforced base. This seemingly small design feature is more expensive to produce, but it's what makes the X3 conical exceedingly stable when compared to other models. When you fill up your fermenter with delicious fresh wort, you want to trust the vessel that’s holding your latest creation. Brewers shouted from the mountaintops that they wanted stronger, sturdier legs right out of the box that doesn’t require an additional bracing shelf. The four-leg, welded-bar reinforced system is absolutely rock solid. This is an especially critical feature if you plan to add rolling casters so you can easily glide the fermenter around your brewery.
The reinforced four-leg design not only increased the stability and strength of the conical but also allows the unit to stand taller, thereby eliminating the need for extensions in almost every situation. An elbow, a sight glass, or the Flex Chamber can be mounted under the unit with room to spare.
Adjustable Feet
The X3 Jacketed Conical comes standard with reinforced thread-in adjustable feet. If your home brewery has uneven flooring, you can quickly and easily level out the fermenter. The feet can be swapped out with high-quality casters at any time.
Flex Chamber Collection Jar - Trub Separator & Yeast Harvester
Working in collaboration with KegLand, we developed the pressurizable Flex Chamber Collection Jar. It attaches directly to the butterfly dump valve and can be used for removing trub, harvesting yeast, and many other tasks. Since it's made from crystal clear Triton, you'll be able to visually monitor fermentation activity just as you would with a sight glass. Ball lock adapters can be attached to the threaded ports on either side, allowing you to connect oxygenation or carbonation stones, or flush the Flex Chamber with CO2 and use it to inject hops or other ingredients into your conical. Also, a great option for storing yeast! Simply attach a 3" T.C. end cap or PRV and store your harvested yeast in the fridge for your next fermentation.
Pressure Pack with Clear Float Technology
Adding pressure capability will allow you to ferment, carbonate, and even serve all in one vessel. The Pressure Pack features the unique Clear Float Technology racking tube that can be used for taking samples, transferring to keg, or serving finished beer. This innovative feature draws beer from the top down, which means you’re always pulling the clearest, most sediment-free beer possible. Using pressure to draw a sample from the floating dip tube will also eliminate the tiny bit of oxygen that would be injected into your beer every time the traditional sample valve is opened.
Pressure transferring from fermenter to keg is the best way to protect your beer from oxygen when it’s at its most vulnerable state. Kegging could be considered the final hurdle in the brewing process, where limiting oxygen exposure is critical. This could mean the difference between your beer tasting great for months or tasting great for a week. Don’t take any chances. Use the Pressure Pack to keg from the top down and leave sediment behind.
Other Features You’ll Love:
Downward-facing Blowoff U Barb prevents blow off tubing from kinking and is much easier to remove and clean than a fixed stainless blow off
Stainless steel lid clamp with single-piece molded silicone gasket
In our GEN 3 redesign, we've added two more 1.5" T.C. ports to the cone and body for additional flexibility with current and upcoming product add-ons
X3 Accessories:
BrewBuilt Kit for Fermenting Under Pressure (Required to ferment or seal/cap an X3 with an active fermentation)
The Pressure Relief Valve (PRV) that comes with the conical is not sufficient for fermentation as it can become clogged with Krausen. To ferment or seal/cap an active fermentation requires the use and safety of the Pressure Fermentation Kit. This no-compromises kit includes the same hardware you will find on a commercial unitank, including a dedicated pro level spunding valve, a sealed pressure gauge, and a dedicated commercial PRV. Read more about these key hardware features in the kit copy. Also included is liquid Foam-Axe which helps reduce Krausen. Please read and follow all special instructions that come with the kit as well as your instruction manual.
Hop Bong Oxygen-Free Dry Hopping Device
The Hop Bong is a versatile pressurizable tri-clamp accessory that is perfect for purging oxygen from your dry hops before dropping them into your fermenter. Load up the Hop Bong, flush it with CO2, purge out oxygen with the handy PRV on top, then simply open the Butterfly Valve to inject your beer with a 6 oz payload of dry hops.
High Roller Caster Set
Go mobile with this heavy-duty caster set. Your fermenter moves around the brewery a lot, so why not give it some glide? Roll from sanitizing to kettle transfer to keg transfer to cleaning with minimal effort. Moving a stainless conical around can be taxing. Give your back a break and upgrade your conical with a set of rolling casters.
IceMaster Max 2
Built to pair perfectly with the IceMaster Max 2 glycol chiller. Easily and efficiently control your fermentation temperature and cold crash for conditioning and clarifying. Pair with our BrewBuilt Insulated Tubing Kit that comes complete with premium quick disconnects with shutoff valves that provide a “dry break” when they’re disconnected.
Immersion Heater
The X3's cone features a 2" tri-clamp port specifically for installing an Immersion Heater. The low watt density heating element gently warms your fermenting beer without scorching. A must-have for brewers living in colder climates or if you want the peace of mind that your temperature will never drop too low for your ale or kveik strains regardless of the time of year.
Full List of X3 Conical Features:
External Cooling Jacket with 1.5" Tri-Clamp connections
Pressure Pack with Clear Float, a floating dip tube that draws beer from the top down.
Flex Chamber Collection Jar, a clear, pressure capable bottom jar that allows you to see fermentation, remove trub, and connect additional accessories
Neoprene insulation sleeve
Wide base with 4 legs for stability
304 stainless steel construction
Mirror polish finish
Interior welds are the best in the business - uniquely ground and polished
(1) 2“ TC port for direct immersion heaters
(3) Horizontal welded cone ports
(1) 8" Lid Cap Opening with 8” TC Clamp
(5) 1.5" TC Lid Openings
3" TC bottom dump with 3" TC butterfly valve
1.5" Thermowell for inserting thermal probe
(4) Adjustable feet
Silicone tube for blow off
Stainless 8” Three Piece Tri Clamp & one piece molded gasket
Built-in 15 psi PRV (Not sufficient for fermentation - optional Pressure Fermentation Kit required for pressure fermentations)
For volume and dimensional specs, Download the PDF.
Installation Note: The Pressure Pack's Clear Float floating dip tube is sized to fit all models of the BrewBuilt Conical. Depending on the size of your fermenter, you may need to shorten the silicone tube for better performance. When installed on your empty fermenter, you ideally want the dip tube to hang freely with just enough length for the end of the dip tube to touch the bottom of the tank.
