This hydrator features a grain input port on the top and a tangential Hot Liquor input. It provides a good initial mix but does not eliminate the need to stir.
Hot Liquor input: 1.5” tri-clamp
Output: 4" tri-clamp
Recommended for 5 to 15 bbl mash tuns
This Reactor Rod was custom built to be used with the 1 bbl MoreBeer! Pro Conical Fermenter, but can easily be integrated to other vessels with a 4" tri-clamp top port. Unlike other in-solution cooling coils on the market, the Reactor Rod utilizes a straight vertical design. Without all the curves and bends of a cooling coil, it is easier to scrub and sanitize the unit prior to setup and after use. The four cooling rods are 32" long measured from the bottom of the T.C. fitting.
1.5" T.C. carbonation stone for 1 & 2 bbl MB Pro conical fermenters and brite tanks.
Specifications:
2 micron
Overall Length: 9.5"
Stone Length: 5.9"
Single-piece design
Made from Stainless Steel
Made from a brand new 1 bbl keg with a 4" tri-clamp opening
1" yeast piping for easily moving dense yeast
Includes two 1.5" tri-clamp butterfly valves at the inlet and outlet
Adjustable PRV for lowering pressure for long term storage
1 bbl size, perfect for up to 20 bbl batches
The MoreBeer! Pro Yeast Brink is made with pro brewers in mind brewing up to 20 barrel batches. The yeast piping gives you a 1" passage to the bottom of a keg to make moving even the thickest yeasts a breeze. There is an adjustable PRV in case you need to lower the pressure for long term storage. The yeast piping is welded into the keg 4" TC keg lid, making for quick and easy inspecting and cleaning. The dip tube is about an inch from the bottom of the keg to help keep non-yeast solids that separate out from transferring with your repitch.
To make it easier to move the yeast brink around the brewery consider a keg cart.
Also available in 1/4 bbl size for up to 5 bbl batches and 1/2 bbl size for up to 10 bbl batches.
Pro tip: If you align one valve handle 90 degrees to the other you won't forget which side is IN or OUT. If you do forget, with the PRV on the back side, the left side is the IN and the right side is the OUT.
The German made 2/3 horse power MB Chiller is an ideal solution for nano breweries looking to chill up to 4 fermenters at once.
The idea of the MiniChilly is that for each fermenter you want to a chill a pump kit is added. A pump kit (GLY355) includes a submersible pump that is placed in the cold bath of the Mini Chilly along with a digital controller that is placed next to your fermenter. Silicone tubing is included to make the connections. The digital controller includes a thermal probe that should be inserted into a thermal well in your vessel or can be taped to the outside of the vessel if you don't have a thermal well. The digital controller then measures the temperature of your tank and turns the submersible pump on or off to cool the liquid in your vessel to the desired set temperature. In this way each tank can be set at different temperatures.
The MiniChilly is made by Quantor/Kreyer of Germany who is the largest manufacturer of glycol systems for breweries and wineries in the world. Made with high quality manufacturing and components, the MiniChilly is a durable system for many years of problem-free brewing.
The unit features a stainless steel case with stainless 3/8" barbs in the top that allow for a clean connection of the silicone tubing that will run from each pump to each tank. The MiniChilly is able to chill its reservoir down to 21°F when a 30% glycol solution is used. The compact size and included casters make it easy to move around the brewery when needed.
Applications:
Cooling of Fermentation
Cold Crashing for Brite Tanks
Maintain Lagering Temperatures
Compatibility:
The MiniChilly can be used with any fermenter that has a built-in cooling jacket or a submersed cooling coil. It works well as the cooling source for the following systems and fermenters.
Ss Brewtech Fermenters and Brites with optional FTS Temperature Control Systems: Because FTS systems include a pump and controller you will not need to buy a separate Glycol Pump Kit.
Spike Conical with Optional Cooling Package - Because the optional Spike cooling system includes a pump and controller you will not need to buy a separate Glycol Pump Kit.
Speidel Tanks with Optional Cooling Jackets - You will need one Glycol Pump Kit for each tank.
Grainfather Fermenters - Grainfather fermenters have standard cooling jackets. You will need one Glycol Pump Kit for each fermenter
Blichmann Fermenators with Optional Cooling Coil - You will need one Glycol Pump Kit for each Fermenator.
Capacity:
Many chiller ratings are based on the theoretical power of the compressor, while the cooling capacity of the MiniChilly is rated at a realistic ambient temperature. This is much more useful for predicting the MiniChilly’s performance in real world applications. Of course, you could cool a greater number of smaller tanks but you’re ultimately limited to the 3 connections. Actual cooling capacities will vary based on the insulation of the tank. For the examples below we assume neoprene or better.
Cooling Capacity Example:
Up to 5 1bbl (31 Gallon) tanks fermenting at 68°F in 80°F ambient temperature. For every fermenter you want to cold crash remove 4 fermenting fermenters from the capacity. Note there is only hooks ups for 4 fermenters.
Set Up:
In order to hook up the MiniChilly to your fermenter or tank's cooling system, you will need 4 lengths of tubing per pump. All tubing connections should be secured with hose clamps.
Length 1: Submersible pump outlet to inner barb of 1st bulkhead
Length 2: Outer barb of 1st bulkhead to cooling system inlet
Length 3: Cooling system outlet to outer barb of 2nd bulkhead
Length 4: Inner barb of 2nd bulkhead to MiniChilly reservoir (should drain freely, no connection necessary)
Technical Characteristics:
Power: 110V-1Ph/50-60Hz
Compressor Power: 2/3hp / 0.5 kw
Cooling Capacity at 32°F glycol temp and 90°F Ambient Temp: 0.38 KW/380 Watts (60Hz 110V)
Cooling Capacity at 60°F glycol temp and 90°F Ambient Temp: 0.65 KW/650 Watts (60Hz 110V)
Stainless Steel case
Water Temperature Range: 21°F - 86°F (-6°C - 30°C)
Ambient Temperature Range: 50°F - 90°F (10°C - 32°C)
Refrigerant R134a
Free Glycol Water-Bath for Mini-Pumps
Fittings 3/8" for Plastic Tubes of Individual Pumps
Solid Wheels w/ Brakes for Easy Mobility
Universal C19 Plug
On/Off Switch
Water-Level Sight-Tube
Grooves for Individual Pump Cables
Safety Inner Separation Water Side from Electric Side
Tank Capacity: 7.13 gal. (27 L)
Dimensions: 27.5"L x 14.5"W x 19.5"H
Weight: 79.5 lbs
Made in Germany
CE Certified
This Reactor Rod was custom built to be used with the 2 bbl MB Conical Fermenter, but can easily be integrated to other vessels with a 4" tri-clamp top port. Unlike other in-solution cooling coils on the market, the Reactor Rod utilizes a straight vertical design. Without all the curves and bends of a cooling coil, it is easier to scrub and sanitize the unit prior to setup and after use. The four cooling rods are 41" long measured from the bottom of the T.C. fitting.
Discover the enhanced Blichmann Engineering Glycol Chiller — now more efficient than ever!
With a powerful 1/2 HP compressor, it delivers cooling capacities of 3100 BTU/hr at 28 degrees Fahrenheit and 3400 BTU/hr at 34 degrees Fahrenheit. Operating quietly, it offers intuitive multi-vessel crashing and fermentation temperature control through a plug-and-play temperature controller dock, making temperature adjustments a breeze. Designed for seamless integration into your existing home brewing setup, it has a compact footprint and organized cable with hose management to avoid unnecessary clutter. Compatible with up to 6 Pump & Controller Kits (optional accessory), this chiller is truly remarkable, and will ensure optimal performance for your brewing needs.
Key Features:
Powerful 1/2 HP Compressor
Cooling capacity of 3100 BTU/hr @ 28°F and 3400 BTU/hr @ 34°F
Multi-vessel crashing and fermentation temperature control
Convenient plug-and-play temperature controller dock
Compatible with up to 6 Pump & Controller Kits (optional)
Tidy cable and hose management
Small footprint
Quiet operation
Optional concentrated propylene glycol is offered in a convenient 2.5-gallon jug
Lagering Temps Capability:
(2) 1 BBL fermenters
(4) 1/2 BBL fermenters
(6) 7-gallon and 14-gallon fermenters
Fermentation Temperature Control Capability:
(4) 1 BBL fermenters
(6) 7-gallon, 14-gallon, and 1/2 BBL fermenters
*Results based on vessels equipped with insulation at an ambient temperature of 75° F.
Premium quality laser-welded 304 stainless steel closed tank
Made in Germany by Speidel and backed by a 25-year warranty
Ideal for spirits and fermented beverages like wine, beer, cider, and kombucha.
Ultra-smooth 2R interior finish allows for easy cleaning with cold water
Outfitted with a 6-bar max cooling jacket for efficient glycol cooling
1.5” tri-clamp ports with two additional DIN ports for included thermometer/thermowell combo and sample valve
The top lid provides a convenient opening for additions and the legs provide easy access to the bottom ports
Vaulted complete drainage bottom for maximum product yield and easy cleaning
We are proud to present these FD storage tanks made of premium quality 304 stainless steel. Built in Germany by Speidel and sold exclusively in the USA by MoreWine! Pro for over 20 years, the world-class traditions of German engineering and craftsmanship are reflected in these tanks. And, after examining tanks built by every major manufacturer worldwide, we can safely say that when it comes to features, quality, and price, these tanks represent the very best value available in stainless steel beer storage.
Safely store small volumes of product in these beautiful tanks. The legs make accessing the ports easy and the convenient top hatch makes cleaning a dream when combined with the 2R interior finish. Heavy-duty sealing mechanism and gasket form a seal on top with a stainless steel lid equipped with a T.C. port for adding accessories or an airlock. The inside is finished to Speidel quality standards with flawless welds and a 2R finish.
The tanks will support a few PSI of pressure, however, they are not pressure-rated or designed to be used under pressure.
Tank Ports
Tanks feature 1.5" T.C. outlets (1 on bottom for complete drainage, one in middle for racking arm, one on top for blowoff/airlock), and also two welded DIN fittings. One DIN port is equipped with an included sample valve and the other has an included thermometer and thermowell combination. The cooling jackets have two 1” NPT ports.
Speidel Quality Features
Full Jacket - These tanks are equipped with a max cooling jacket rated to 6-bar. This will allow you to hook it into a glycol system for complete temperature control.
Interior Finish - Speidel tanks feature an ultra-smooth 2R interior surface which allows you to clean your tanks with cold water, without scrubbing. This saves significant labor costs.
Weld Quality - Speidel's robotic-arm laser welders create flawless stainless-to-stainless junctions that look and feel more like a taped fabric seam than a traditional weld. Ultra high-quality welds leave no chance for residual products to harbor spoilage organisms.
Warranty - Speidel and MoreWine! Pro back up each and every tank with an industry-leading 25-year warranty against defects in materials or workmanship.
Thickness - Speidel tanks are on average around 25% thicker than Italian-manufactured tanks of the same general capacity and dimensions.
Complete Drainage Bottoms - These tanks are outfitted with vaulted bottoms for total drainage, which maximizes product yield at racking and makes cleaning a snap.
Tank Features:
Full Volume of 240 L (63.4 gal)
Perfect for blending two barrels of wine
1.5" T.C. Drain, Racking Port, and Lid outlet
8.5" Top hatch for easy cleaning and additions
2 X DIN10 Fittings w/ Sample Valve and Thermowell/Thermometer combo
2 x 1" NPT Ports on the jacket
Tank Dimensions: 550mm D x 1524mm H (21.6" D x 60" H)
Due to high demand, the 10 ft is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory.
Kink and crush resistant suction & discharge rubber hose, designed for demanding applications that require high temperature and chemical resistance
ForgeFit barbed connector and crimp sleeve system are designed to provide a long life and easy to clean hose connection
Hose barb skips the first barb to provide a gapless and smooth transition to the tubing
Our sleeves are machined from pipe to meet sanitary standards, avoiding the uneven compression and hard points caused by welding, and offering a superior surface finish that is both more hygienic and visually appealing
1" ID tubing is sometimes preferred to 1.5" as it is easier to handle and decreases product loss
Novaflex Connoisseurs Beverage Hose Meets 3-A (cert# 1803), FDA & USDA standards
Now selling tubing sets made from ForgeFit fittings and Novaflex Connoisseurs food & beverage tubing that is assembled in the MoreBeer! Pro production shop in Pittsburg, California. The options above are already assembled and ready to shop.
Novaflex is a special kink and crush resistant suction & discharge rubber hose, designed for those demanding applications requiring a product that meets 3-A (cert# 1803), FDA & USDA standards. This tube is for non-oily applications. Designed to meet the temperatures and chemical resistance associated with "cleaning in place" systems. The ultra smooth microbe resistant tube is built on special stainless steel mandrels for cleanliness.
The ForgeFit barbed connector and crimp sleeve system are designed to provide a long life and easy to clean hose connection. The long barb and the long sleeve provide a secure crimp without crushing the hose. Triple banding can slip or damage the hose during installation and has sharp edges. The ForgeFit hose barb skips the first barb to provide a gapless and smooth transition to the tubing to make it easier to keep clean. Our barb has a stop to ensure the hose does not creep closer to the clamp in service.
Don't forget to add hose bumpers to your order to protect your investment! The ForgeFit® Silicone Hose Bumper is designed to protect your hose ends by absorbing the impact of the hose end hitting the floor when it's dropped. The unique built in handle makes it easier to grab and saves your back.
Novaflex Construction:
Tube: White Chlorobutyl
Reinforcement: Multiple plies of polyester tire cord & dual monofilament helix
Cover: Gray EPDM abrasion resistant
Temperature Range: -40° to 240°F (CIP to 248°F)
Not for continuous steam service
in.
mm
ID
1
25.4
OD
1.64
41.65
Bend Radius
3.5
88.9
This is a premium black neoprene jacket, tailor-made for the 1 bbl MB Conical Fermenter. Made from 6mm neoprene with black fabric on both sides. Perfect for insulating the conical and using alongside our Reactor Rods.
Use your existing glycol system to cool your cellar
Eliminates the need to purchase an entirely separate refrigeration system
MR series fan units offer quieter operation compared to the SD-S units
Sized for well-insulated rooms up to 8,750 ft³
Made in Germany by Kreyer
Cool your cellar using your existing glycol system. Save energy and money! These units work under the same principles as standard refrigeration but use cooled glycol instead of cooled refrigerant gas, eliminating the need to have a separate refrigeration system. It is a fantastic use of your glycol system for a majority of the year when typically glycol systems are on but are being sporadically called upon. Glycol systems do need to be sized to accommodate both these fan units and peak duty during the crush to be able to accommodate all tasks at once.
Glycol from your main glycol chiller is recirculated through these fan units. Aluminum fins act as heat exchangers drawing heat out of your room as the fins are cooled by the glycol. If you have a Kreyer chiller/heater you can even heat a space in cold weather environments.
The heat exchangers inside the units are made from corrugated aluminum fins and internally grooved copper tubes. The white ABS casing looks great. Because of its rounded corners it has no water retaining areas favorable to germ development. Units are outfitted with stainless steel screws and show no sharp, cutting edges.
Fan Unit Temp Control Upgrades:
1/2 in. Solenoid Valve - Allows or blocks flow of glycol through the fan unit. Needs to be connected to a Controller to function. A filter is recommended to protect the solenoid.
1/2 in. Solenoid Filter - protects the solenoid valve from any particulate or sediment.
Glycol Fan Control Unit - Set a specific temperature on this controller and it will open and close the solenoid valve.
Solenoid Connection Cable - This 2 meter long cable is required to connect the Solenoid Valve & Control unit.
Specifications of MR210:
Will cool well insulated spaces up to 8750 cubic feet while drawing 1 Ton of cooling power
Triple Fan Unit
220V connection required to run fan
You will need to connect to your existing glycol system
Inlet and Outlet: 3/4" Male BSP
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this item to you when we receive more in mid February.
Extra-large carbonation stone sized for 60 bbl fermenters and above
Quickly carbonate finished beer in any stainless fermenter or brite tank with 3" tri-clamp connection
Welded 1/2" FPT connection point feeds CO2 through the 17.75" long stone
Made from stainless steel
The MB carbonation stone can connect to any stainless fermenter or brite tank with 3" T.C. connection. The ferrule has a 1/2" female pipe thread connection point for your gas line. The overall length from the T.C. ferrule to the tip of the stone is 27.5" long with the stone section itself being approximately 17.75" in length.
Specifications:
2 micron
Overall Length: 27.5"
Stone Length: 17.75"
Single-piece design
Made from Stainless Steel
This professional level two stage heat exchanger is designed to handle chilling for up to 15 bbl batches. Tap water is run through the first stage for the initial temperature drop and then glycol is recirculated through the second stage to lower the wort temp further. The chiller comes with 37 plates and provides 3 m² or 32.2 ft² of cooling area.
When chilling, expect to use your batch size worth of tap water and your batch size worth of chilled liquor.
MB may have developed these chillers with brewers in mind, but heat exchangers are commonly used in a wide range of food production and industrial applications.
Food & Drink Manufacturing:
Beer: beer, wort
Wine: rice wine, wine, etc.
Dairy: milk, milk powder, milk beverages, yogurt, etc.
Vegetable protein beverages: peanut milk, milk tea, soy milk, soy milk drinks, etc.
Fruit drinks: fresh juice, juice tea, etc.
Tea drinks: beverages of tea, aloes, fruit & vegetables, etc.
Seasonings: soy sauce, rice vinegar, tomato juice, sweet and pungent sauces, etc.
Pasteurization
Industrial Liquids Processing:
Pharmaceutical production
Dyeing
HVAC thermal exchange
Chemical industry
Power stations, heating for swimming and bathing
Petroleum
Metallurgy
Domestic hot water
Shipbuilding
Machinery
Paper-making
Textile
Geothermal utilization
Environmental protection
Refrigeration, etc.
The German made 1.2 horse power MB Chiller is an ideal solution for nano breweries looking to chill up to 10 fermenters at once.
The idea of the MiniChilly is that for each fermenter you want to a chill a pump kit is added. A pump kit (GLY355) includes a submersible pump that is placed in the cold bath of the Mini Chilly along with a digital controller that is placed next to your fermenter. Silicone tubing is included to make the connections. The digital controller includes a thermal probe that should be inserted into a thermal well in your vessel or can be taped to the outside of the vessel if you don't have a thermal well. The digital controller then measures the temperature of your tank and turns the submersible pump on or off to cool the liquid in your vessel to the desired set temperature. In this way each tank can be set at different temperatures.
The MiniChilly is made by Quantor/Kreyer of Germany who is the largest manufacturer of glycol systems for breweries and wineries in the world. Made with high quality manufacturing and components, the MiniChilly is a durable system for many years of problem-free brewing. It is German made and we guarantee you will appreciate the build quality when compared to other chillers on the market.
The unit features a stainless steel case with stainless 3/8" barbs in the top that allow for a clean connection of the silicone tubing that will run from each pump to each tank. The MiniChilly is able to chill its reservoir down to 21°F when a 30% glycol solution is used. The compact size and included casters make it easy to move around the brewery when needed.
Applications:
Cooling of Fermentation
Cold Crashing for Brite Tanks
Maintain Lagering Temperatures
Compatibility:
The MiniChilly can be used with any fermenter that has a built-in cooling jacket or a submersed cooling coil. It works well as the cooling source for the following systems and fermenters.
BrewBuilt Jacketed Uni Conical - You will need one Glycol Pump Kit for each tank.
Ss Brewtech Fermenters and Brites with optional FTS Temperature Control Systems: Because FTS systems include a pump and controller you will not need to buy a separate Glycol Pump Kit.
Spike Conical with Optional Cooling Package - Because the optional Spike cooling system includes a pump and controller you will not need to buy a separate Glycol Pump Kit.
Speidel Tanks with Optional Cooling Jackets - You will need one Glycol Pump Kit for each tank.
Grainfather Fermenters - Grainfather fermenters have standard cooling jackets. You will need one Glycol Pump Kit for each fermenter
Blichmann Fermenators with Optional Cooling Coil - You will need one Glycol Pump Kit for each Fermenator.
Capacity:
Many chiller ratings are based on the theoretical power of the compressor, while the cooling capacity of the MiniChilly is rated at a realistic ambient temperature. This is much more useful for predicting the MiniChilly’s performance in real world applications. Of course, you could cool a greater number of smaller tanks but you’re ultimately limited to the 10 connections. Actual cooling capacities will vary based on the insulation of the tank. For the examples below we assume neoprene or better.
Cooling Capacity Example:
Up to 10 1BBL (31 Gallon) well-insulated tanks fermenting at 68°F in 80°F ambient temperature. For every fermenter you want to cold crash remove 4 fermenting fermenters from the capacity.
Set Up:
In order to hook up the MiniChilly to your fermenter or tank's cooling system, you will need 4 lengths of tubing per pump. All tubing connections should be secured with hose clamps.
Length 1: Submersible pump outlet to inner barb of 1st bulkhead
Length 2: Outer barb of 1st bulkhead to cooling system inlet
Length 3: Cooling system outlet to outer barb of 2nd bulkhead
Length 4: Inner barb of 2nd bulkhead to MiniChilly reservoir (should drain freely, no connection necessary)
Technical Characteristics:
Power: 110V-1Ph/50-60Hz
Compressor Power: 1.2hp/900watts
Cooling Capacity at 32°F glycol temp and 90°F Ambient Temp: 1.05 KW/1050 Watts (60Hz 110V)
Cooling Capacity at 60°F glycol temp and 90°F Ambient Temp: 1.92 KW/1920 Watts (60Hz 110V)
Stainless Steel Unit
Water Temperature Range: 21°F - 86°F (-6°C - 30°C)
Ambient Temperature Range: 50°F - 90°F (10°C - 32°C)
Refrigerant R134a
Free Glycol Water-Bath for Mini-Pumps
Fittings 3/8" for Plastic Tubes of Individual Pumps
Solid Wheels w/ Breaks for Easy Mobility
Universal C19 Plug
On/Off Switch
Water-Level Sight-Tube
Grooves for Individual Pump Cables
Safety Inner Separation Water Side from Electric Side
Tank Capacity: 12.68 gal. (48 L)
Dimensions: 29.5"L x 15.75"W x 21.75"H
Weight: 112.5 lbs
Made in Germany
CE Certified
Use your existing glycol system to cool your cellar
Eliminates the need to purchase an entirely separate refrigeration system
MR series fan units offer quieter operation compared to the SD-S units
Sized for well-insulated rooms up to 3,500 ft³
Made in Germany by Kreyer
Cool your cellar using your existing glycol system. Save energy and money! These units work under the same principles as standard refrigeration but use cooled glycol instead of cooled refrigerant gas, eliminating the need to have a separate refrigeration system. It is a fantastic use of your glycol system for a majority of the year when typically glycol systems are on but are being sporadically called upon. Glycol systems do need to be sized to accommodate both these fan units and peak duty during the crush to be able to accommodate all tasks at once.
Glycol from your main glycol chiller is recirculated through these fan units. Aluminum fins act as heat exchangers drawing heat out of your room as the fins are cooled by the glycol. If you have a Kreyer chiller/heater you can even heat a space in cold weather environments.
The heat exchangers inside the units are made from corrugated aluminum fins and internally grooved copper tubes. The white ABS casing looks great. Because of its rounded corners it has no water retaining areas favorable to germ development. Units are outfitted with stainless steel screws and show no sharp, cutting edges.
Fan Unit Temp Control Upgrades:
1/2 in. Solenoid Valve - Allows or blocks flow of glycol through the fan unit. Needs to be connected to a Controller to function. A filter is recommended to protect the solenoid.
1/2 in. Solenoid Filter - protects the solenoid valve from any particulate or sediment.
Glycol Fan Control Unit - Set a specific temperature on this controller and it will open and close the solenoid valve.
Solenoid Connection Cable - This 2 meter long cable is required to connect the Solenoid Valve & Control unit.
Specifications of MR135:
Will cool well insulated spaces up to 3500 cubic feet while drawing 2/3 Ton of cooling power
Double Fan Unit (pictured is 3 fan unit)
220V connection required to run fan
You will need to connect to your existing glycol system
Inlet and Outlet 3/4" Male BSP
This is a premium black neoprene jacket, tailor-made for the 2 bbl MB Conical Fermenter. Made from 6mm neoprene with black fabric on both sides. Perfect for insulating the conical and using alongside our Reactor Rods.
Use your existing glycol system to cool your cellar
Eliminates the need to purchase an entirely separate refrigeration system
SD-S series fan units were designed specifically for high-moisture environments like wine cellars
Sized for well-insulated rooms up to 17,500 ft³
Made in Germany by Kreyer
Cool your cellar using your existing glycol system. Save energy and money! These units work under the same principles as standard refrigeration but use cooled glycol that you already have instead of cooled refrigerant gas, eliminating the need to have a separate refrigeration system. It is a fantastic use of your glycol system for a majority of the year when typically glycol systems are on but are being sporadically called upon. Glycol systems do need to be sized to accommodate both these fan units and peak duty during the crush to be able to accommodate all tasks at once.
Glycol from your main glycol chiller is recirculated through these fan units. Aluminum fins act as heat exchangers drawing heat out of your room as the fins are cooled by the glycol. If you have a Kreyer chiller/heater you can even heat a space in cold weather environments.
The heat exchangers inside the units are made from corrugated aluminum fins and internally grooved copper tubes. The white ABS casing looks great. Because of its rounded corners it has no water retaining areas favorable to germ development. Both series are fitted with stainless steel screws and show no sharp, cutting edges.
The SD-S series has been designed especially for problematic environments such as wine-cellars with high moisture. The high-performance fans on the SD-S unit are lubricated for life.
The SD-S 35 is sized to:
Cool a room up to 17,500 when the ceiling and walls are well insulated. Cooling a room this size from 90F to 60F will use approximately 1.05 tons of cooling power from your chilling system. If the room is half insulated you will need approximately 50% more power or 1.6 tons of cooling power. Once you've achieved the desired temperature it takes considerably less power to maintain it.
Fan Unit Temp Control Upgrades:
3/4 in. Solenoid Valve - Allows or blocks flow of glycol through the fan unit. Needs to be connected to a Controller to function. A filter is recommended to protect the solenoid.
3/4 in. Solenoid Filter - protects the solenoid valve from any particulate or sediment.
Glycol Fan Control Unit - Set a specific temperature on this controller and it will open and close the solenoid valve.
Solenoid Connection Cable - This 2 meter long cable is required to connect the Solenoid Valve & Control unit.
Inlet and Outlet: 3/4" Male BSP
Please Note: This unit only has one fan. The weight shown below is for shipping purposes, as this item ships at an oversize rate with UPS Ground. Actual weight of the fan is about 35lb. Actual Dimensions are 710x410x460mm
1.5" T.C. carbonation stone for 1 & 2 bbl MB Pro conical fermenters and brite tanks.
Specifications:
2 micron
Overall Length: 7"
Single-piece design
Made from Stainless Steel
Replacement tank manway locking handle for 3.5 bbl MB Conical Unitank Fermenter.
Please Note: This replacement part is intended for unitanks produced after 2021. The diameter of the threads are M18.
This clever device allows you to back fill your tank with an inert gas while cold crashing to avoid the ingress of O2 through the vacuum relief. It is normally used on a tee with a normal PRV/Vacuum Breaker. The NPT port is hooked up to a regulator and set to a low pressure. The exact setting used will depend on the volume of your head space and your regulator. Start at 2 PSI and adjust from there. A pin spanner is required for disassembly.
1.5" tri-clamp
1/2" female NPT port
This professional level two stage heat exchanger is designed to handle chilling for up to 30 bbl batches. Tap water is run through the first stage for the initial temperature drop and then glycol is recirculated through the second stage to lower the wort temp further. Provides 6 m² or 64.5 ft² of cooling area.
Expect to use your batch size worth of tap water and your batch size worth of chilled liquor.
MB may have developed these chillers with brewers in mind, but heat exchangers are commonly used in a wide range of food production and industrial applications.
Food & Drink Manufacturing:
Beer: beer, wort
Wine: rice wine, wine, etc.
Dairy: milk, milk powder, milk beverages, yogurt, etc.
Vegetable protein beverages: peanut milk, milk tea, soy milk, soy milk drinks, etc.
Fruit drinks: fresh juice, juice tea, etc.
Tea drinks: beverages of tea, aloes, fruit & vegetables, etc.
Seasonings: soy sauce, rice vinegar, tomato juice, sweet and pungent sauces, etc.
Pasteurization
Industrial Liquids Processing:
Pharmaceutical production
Dyeing
HVAC thermal exchange
Chemical industry
Power stations, heating for swimming and bathing
Petroleum
Metallurgy
Domestic hot water
Shipbuilding
Machinery
Paper-making
Textile
Geothermal utilization
Environmental protection
Refrigeration, etc.
Get your brew day started faster with the MB commercial grain mill—process an entire pallet of malt in an hour!
Differential roller speed applies enough force to open the grain kernels as they pass through the rollers without damaging the husk, improving efficiency and lauter performance
Slotted rollers more effectively expose the starchy endosperm inside the kernel compared to knurled rollers
Rollers made from steel alloy which is harder and longer lasting than stainless steel
0.4mm to 2mm mill gap is easily dialed in with large, handled adjustment wheels
Professional quality grain mill with stainless steel construction throughout
Unleash this beast in your brewery and you'll be ready to mash in no time flat. The MB commercial-grade mill can process upwards of 2,000 lbs of grain per hour and features large diameter slotted stainless steel rollers for an excellent crush and long life. This mill can easily power through whatever you throw at it, including barley, wheat, rye, and corn.
Differential Roller Speed
Rotating the rollers at different speeds is the key to a superior crush. Standard grain mills rotate the rollers at the same speed, creating a pinch point between them where the grain kernels are cracked open. Although effective, this can often lead to an excess of flour and damaged grain husks. The MB pro mill drives the rollers at different speeds to apply enough force to open the grain kernels as they pass through the rollers without damaging the husk. This action results in a better crush that will improve efficiency and lauter performance.
Slotted Rollers
Many grain mills feature hardened steel knurled rollers due to the lower cost, but they don't provide the best crush possible. Rather than pounding the grain into submission, slotted rollers (also known as fluted rollers) are more effective at shearing the grain husk to expose the endosperm while leaving the hull intact. The rollers are made from steel alloy which are harder and longer lasting than stainless steel.
Professional Quality
The MB pro mill is an industrial workhorse and the best value for a commercial mill on the market. The hopper capacity is 45 lbs of grain and large adjustment wheels make for easy gap adjustments. Stainless steel construction throughout, and anchor holes in the feet allow the unit to be bolted to the ground.
Specifications:
Processing Speed: 1,700–2,200 lbs/hr
Hopper Capacity: 45 lbs
Voltage: 208V/220V 3-phase motor
Power: 4 HP
Amperage: 13.6 amps
Mill Gap: 0.4mm - 2mm
Mill Roller Size: 155mm diameter, 110mm long
Please note: the unit will arrive bare without a power cord, plug, or controls to power the motor on or off. You will need an electrician to wire the appropriate power cord and controls to the motor.
Please Note: This unit REQUIRES 220V Three Phase power and will not function on anything else. Please confirm that you have the proper power for this unit before purchasing, and plan to have a qualified electrician wire the necessary plug to the cord.
Use your existing glycol system to cool your cellar
Eliminates the need to purchase an entirely separate refrigeration system
SD-S series fan units were designed specifically high-moisture environments like wine cellars
Sized for well-insulated rooms up to 28,000 ft³
Made in Germany by Kreyer
Good for cooling cellars up to 28,000 cubic feet
Cool your cellar using your existing glycol system. Save energy and money! These units work under the same principles as standard refrigeration but use cooled glycol that you already have instead of cooled refrigerant gas, eliminating the need to have a separate refrigeration system. It is a fantastic use of your glycol system for a majority of the year when typically glycol systems are on but are being sporadically called upon. Glycol systems do need to be sized to accommodate both these fan units and peak duty during the crush to be able to accommodate all tasks at once.
Glycol from your main glycol chiller is recirculated through these fan units. Aluminum fins act as heat exchangers drawing heat out of your room as the fins are cooled by the glycol. If you have a Kreyer chiller/heater you can even heat a space in cold weather environments.
The heat exchangers inside the units are made from corrugated aluminum fins and internally grooved copper tubes. The white ABS casing looks great. Because of its rounded corners it has no water retaining areas favorable to germ development. Both series are fitted with stainless steel screws and show no sharp, cutting edges. Built in defrosters help ensure the system is working at optimum efficiency
The SD-S series has been designed especially for problematic environments such as wine-cellars with high moisture. The high-performance fans on the SD-S unit are lubricated for life.
Fan Unit Temp Control Upgrades:
3/4 in. Solenoid Valve - Allows or blocks flow of glycol through the fan unit. Needs to be connected to a Controller to function. A filter is recommended to protect the solenoid.
3/4 in. Solenoid Filter - protects the solenoid valve from any particulate or sediment.
Glycol Fan Control Unit - Set a specific temperature on this controller and it will open and close the solenoid valve.
Solenoid Connection Cable - This 2 meter long cable is required to connect the Solenoid Valve & Control unit.
Inlet and Outlet: 3/4" Male BSP
The SD-S 73 is sized to:
Cool a room up to 28,000 cubic feet when the ceiling and walls are well insulated. Will use approximately 2.5 tons of cooling power from your chilling system. If the room is half insulated you will need to move up to SD-S 110. Please be sure to consult with our Wine team for proper sizing of a fan unit.
