Our Warehouse Is Full. Your Home Brewery Wins.

Show previous products

• 

  CellarScience® BUBBLY Dry Wine Yeast | Premium Wine Yeast

  Really strong and fast fermentations Best strain to ferment out in touch conditions One of the most popular, classic Champagne strains Low nutrient requrements The classic Champagne yeast. With a fast fermentation rate, high alcohol tolerance, and low nutritional requirment it is one of the easiest yeasts to ferment. Allows varietal character to shine through while accentuating stone fruit and citrus. Able to ferment under higher pressures. Does not ferment Malic acid so natrually produces fresh wines with crisp acidity. This makes it a classic choice for fruit wines, meads and ciders. Top choice for doing secondary fermenation in the bottle for natural carbonation. One of the most popular yeast strains in the world. Can handle lower fermentation temperatures.   Start Time: Fast Alcohol tolerance: 15% Nitrogen Demand: low Yan Requirement @ 23 Brix: 220 ppm Production of volatile acidity: Low Production of SO2: Low Ease to Ferment with MLF: Good Yeast type: Bayanus Killer Factor: Neutral Optimal Fermentation Temp: 45–90°F   Proper yeast hydration helps ensure a healthy fermentation. For every gram of yeast, mix .25 g of FermStart yeast nutrient with 25 ml of sterilized tap water between 104–106°F/40–41°C. When water reaches 104°F/40°C, sprinkle yeast into water and stir gently. Allow the slurry to stand undisturbed for 15 minutes and then stir again. For every gram of yeast used add 25 ml of clean must to the yeast slurry and let stand 15–20 minutes. If necessary, use additional must to adjust yeast slurry to within 18°F of must temp before pitching. For a complete nutrient schedule sufficient for most fermentations, add 1.5 g of FermFed DAP Free per gallon of must at the first sign of fermentation and 1 g of FermFed per gallon of must after 1/3 sugar depletion.   Download the PDF

  Read more less

  $1.49 - $35.18

• Sale -20%

  Stainless Steel Distilling Parrot

  17 reviews

  A distiller's parrot is a piece of equipment that allows you to take alcohol gravity measurements using an Alcometer continuously throughout your pot or reflux run. It should be placed inline of your distillation outlet so that the drops of distillate fall directly into the tallest collection cone. But it should only placed in-line after you collect your foreshots. Your alcometer is then gently placed into the lower cone. Be careful not to drop in the alcometer before there is any liquid/distillate in the cone, as dropping it into an empty cone could break your glass alcohol meter. Specifications: Max Capacity: 105 ml (w/o alcometer) Weight: 1.9 lbs Made from 304 Stainless Steel Kegland Part number: KL14823 I.D. of 19mm (0.74") Does not include alcohol meter.  

  Read more less

  $93.99 $75.19

• 

  Ekuanot® Brand HBC 366 (Equinox) | Pellet Hops

  4 reviews

  Ekuanot® is one of the newest hop varietals released and has been received with much acclaim. Released in 2014, Ekuanot® (formally Equinox and HBC 366) has surged in popularity and growing acreage.  The ridiculously high oil content (2.5-4 ml/100g!) and desirable aromatics have lead breweries of all sizes to flock to this hop. Great for all beer styles but definitely featured in IPAs and other hop forward beers. Ekuanot® is described as having aromas of melon, berry, orange peel, lime, papaya, pine and fresh peppers.  Try it in your next batch and see what flavors you find!   Hop Statistics: Alpha Acids: 13 – 15.5% Beta Acids: 4.0 – 5.0% Cohumulone: (% of alpha acids): 31 – 36% Total Oils in mls per 100 grams dried: 2.5 – 4.0   Hops are packaged in oxygen and light barrier bags.   Ekuanot® is a registered trademark owned by Yakima Chief Hops, LLC.  

  Read more less

  $2.29 - $138.99

• Sale -25%

  Digital Mini Pressure Gauge (0-90 psi) - 8 mm Duotight Compatible

  1 review

  Get instant pressure reads with the back illuminated Digital Mini Pressure Gauge from KegLand. Compatible with 8 mm Duotight fittings and Gray Ball Lock QDs. If you're using the original BlowTie spunding valve without pressure gauge, you can use a Duotight tee fitting in-line between the ball lock QD and the BlowTie to take pressure readings with the Digital Mini Gauge. KegLand has developed the world's most compact mini digital gauge with backlight illumination. This very compact design retains high accuracy while still meeting the desirable small form factor. This meets the growing need as mini keg systems, mini regulators and other more compact keg dispensing solutions are required. Traditional analogue gauges require a small capillary mechanism where a small pipe expands and unravels under pressure. This in turn drives a mechanical cog to rotate the gauge needle. This age-old technique works quite well especially in large gauges but as this mechanism is manufactured smaller and smaller a tradeoff between accuracy and size becomes the issue. With very small gauges such as a 27mm x 27mm Mini Gauge, it's difficult to make them better than 10% accuracy due to the physical constraints of the mechanical components. Specifications: Battery Life: More than 2 years (using the mini gauge once a day) Battery Type: CR2032 Auto Battery Saver: automatically turns off after 15 sec Size: 27mm x 27mm (1" x 1") Duotight Stem: 8 mm KegLand Part Number: KL18081 Please note: This gauge is not suitable for measuring pressure of liquids. It is only for measuring gas pressure. If liquid gets into the pressure transducer it will damage the gauge.

  Read more less

  $16.49 $12.36

• 

  Chinook | Cryo Hops®

  Dual purpose hops popularly used in American styles including Pale Ales and West Coast IPAs Aroma Profile: Berry, Grapefruit, Pine, Stone Fruit, Tropical Alpha Acids: 18.0 – 24.0% Cryo Hop® Hop Pellets Higher AA and nearly twice the resin content of traditional T-90 hop pellets Increase yield by reducing vegetal matter in your brewhouse and fermenter Cryo Hops® provide brewers with the ability to get gigantic hop character while reducing astringent and unpleasant vegetal flavors. With a substantially higher oil and resin content, LupuLN2 powder offers up all the flavor and aroma of a heavily hopped beer, but with a significanly reduced grassy character. Additionally, the lower dosage rate of the concentrated powder reduces the volume of trub and therefore, kettle loss. Using Cryo Hops® you will net more beer that is clearer! Typical usage of Cryo Hops® would be roughly 50% of pellets. LupuLN2 powder can be used in any application where traditional hop products are utilized, including: Bittering, Kettle, Whirlpool and even direct to the fermentor.  It is suggested that you use Cryo Hops® as late additions, in the whirlpool or dry hop, as the volatile aromatic compounds will be driven off if added early in the boil. Cryo Hops® are an innovative hop product that is made by separating the lupulin from the hop flower using cryogenic processing. The result is a product with twice the potency of T90 pellets, with reduced astringency and vegetative material. Note: These hops come pelletized. The powder is compressed into pellet form to make handling easier. Typical Hop Statistics: Alpha Acids: 18.0 – 24.0% Beta Acids: 6.0 – 9.0% Total Oil: 1.5 – 4.0%   Cryo Hops® is a registered trademark owned by Yakima Chief Hops, LLC.

  Read more less

  $3.99 - $259.99

• Sale -30%

  KegLand Ball Lock Quick Disconnect (QD) | Beverage Out | Barbed

  45 reviews

  The most affordable ball lock quick disconnect we offer! Black color easily identifies the QD for beverage use 1/4" barb connection This black, beverage out quick disconnect comes with a barb for attaching to a beverage line, and its high quality construction creates a sturdy seal that won’t leak gas or beer when in use. The barb measures 1/4 inch, so 3/16 inch beverage tubing is recommend for the perfect fit.  Note: Sometiems ball lock fittings can be difficult to get fully seated on a Cornelius keg. We recommend using a quick spray of sanitizer solution to act as a lubricant and giving it a few twists while applying the ball lock. Kegland Part Number: KL02950

  Read more less

  $6.59 $4.61

• 

  Briess CBW® Traditional Dark | Concentrated Brewers Wort | Liquid Malt Extract | LME | 30 SRM

  7 reviews

  Traditional Dark has an intense, sweet and malty flavor perfect for Brown Ales, Porters, Stouts, and other malt-forward styles Can be used as 100% of your fermentable sugar in extract brewing Add for color correction, boost gravity, or improve head retention in all grain brewing Briess Malt & Ingredients has had a focus on quality and innovation for more than 140 years, with all of their products being made in the U.S.A. Concentrated Brewers Wort (CBW) Liquid Malt Extract (LME) from Briess. Briess CBW malt extracts get all of their color and flavor from base and specialty malts, never through additional boiling. CBW malt extracts are unhopped and nondiastatic for flexible, creative brewing Traditional Dark LME: 100% pure malt barley extract made from a blend of 100% malts and water. Typical Analysis: Color (8° Plato): 30 SRM Fermentability: 75% Solids: 79%

  Read more less

  $14.99 - $949.99

• Sale -14%

  Kegmenter Fermentation Keg - 7.6 gal.

  13 reviews

  Want an easy-to-use, stainless vessel that ferments and carbonates? This 29L/7.6 Gallon keg has been modified to allow you to do both! The top is fitted with a large 4 inch tri-clamp lid with two ball lock posts and a pressure relief valve. You can use this vessel to ferment, carbonate, serve, or push the beer through a filter. The posts are recessed which allows you to stack these kegs up to 4 high. A 4" T.C. end cap with pre drilled hole is also available (H691), which can be paired with a #3 stopper and airlock. Also consider the Kegmenter Hop Bong Pressure Pack which allows for oxygen-free dry hopping and also features ball lock posts for Gas & Liquid. Depending on how long it will take to consume the finished beer, we recommend using two kegmenters, one for fermentation and one for carbonating and serving. After fermentation, there will be a large trub cake at the bottom of the vessel. Leaving finished beer on the trub for too long (2-3 weeks) may eventually lead to off-flavors. Check out our ball lock jumper line (KEG575) to easily transfer from one kegmenter to the other. Also consider our beer filter kit (FIL40), which will allow you to filter the beer during transfer. Features: Rated up to 2.5 BAR (36 psi) 4" T.C. lid with ball lock posts Floating dip tube Stainless steel 1.8 mm thick Use: As a stainless steel fermenter that is easy to clean Great choice for 5 gallon fermentations Easy to pressurize the kegmenter after fermentation to push through a filter and into another keg Fermenting under pressure, allowing CO2 to exit via the relief valve, reduces esters and fusel alcohol production allowing you to ferment at warmer temperatures Distillation - with the addition of a T.C. reducer and condenser (H701 / DS120 / DS130) As a cellar keg for topping up barrels Warning: Always depressurize keg before removing lid. Does not include spunding valve shown in example photo. Please see FIL42A. Kegland Part number: KL05906

  Read more less

  $274.99 $235.59

• Sale -21%

  BrewZilla Neoprene Jacket | 65L | Gen 4 | Sparge Arm Sleeve | Improves Heating Times | Reduces Heat Loss | Removable for Faster Chilling

  3 reviews

  Add this neoprene jacket to your Gen 4 BrewZilla to speed up heating! Heating is 10% faster and heat loss from the boiler is reduced by 50% Remove the jacket after the boil to speed up chilling Thick, insulating neoprene is secured to the boiler body with a sewn-on hook and loop fastener strap Sparge arm sleeve included to reduce heat loss during mash recirculation Add some insulation to your BrewZilla to get better boils! This neoprene jacket will help keep the heat in for quicker and more vigorous boils. Slap it on to speed up heating; take it off to speed up chilling. Also includes a neoprene sleeve for the recirculation arm to reduce heat loss during the mash. This jacket will fit Gen 4 BrewZilla models. It is not compatible with older generations of BrewZillas and DigiBoils due to where the cutouts on the jacket are located. Features: 10% faster heat up time 50% less heat loss from boiler Fits the 65L BrewZilla Gen 4 Made from 8 mm thick neoprene which is easy to wash after use KegLand Part Number: KL24372  

  Read more less

  $32.99 $26.09

• Sale -15%

  32 oz Growler - Amber

  32 fl oz amber 'growlette'. You will also need a 38 mm screw top, which is not included. 38mm is the same finish as most standard screw top growlers. Sold individually or in a case of 6.

  Read more less

  $4.24 - $27.99

• Sale -17%

  Beer Bottles | Euro | Amber Glass Bottles | 16.9 oz | 500mL | Case of 12

  4 reviews

  Euro glass beer bottles At 16.9 ounces, this is the perfect bottle size to pour a full pint glass Thick amber glass offers better protection against UV rays compared to green or clear glass Three cases of 12 bottles are enough to package a 4.75 gallons of finished beer Rather than labeling, you can color code your homebrew with different colored bottle caps 26mm crown cap finish Our 500 ml beer bottles are perfect for your latest creation. 500 ml / 16.9 oz is the perfect size. Larger than a 12oz bottle, it will fill a pint glass to the rim but is not quite the commitment of a 22oz bomber bottle. Amber color. Accepts standard bottle caps. Very similar to but not exactly the same as the bottle used for Pliny The Elder. Bottle Specifications: Capacity: 500 ml Weight: 3/4 lb Height: 9 inches Outside Diameter: 2.8 inches Pressure Rating: Up to 3 volumes of carbonation.

  Read more less

  $13.29 - $1,039.99

• Sale -9%

  The Evill Twin Grain and Malt Mill

  10 reviews

  Don't run away from this Evill Twin! Instead, run toward and embrace it like a long lost sibling. The Evill Twin Roller Mill is the perfect sidekick for any brewer needing to grind malted and non-malted barley, corn and other grains. Operation is smooth and easy thanks to the longer mill shaft. Unlike other manual mills, the crank on the Evill Twin connects to the shaft far enough away from the mill body that you won't scrape your knuckles on the grain bucket with every revolution. Better yet, the mill shaft comes ready to hook up to an electric power drill with no extra parts needed. Run your drill at 500 RPM and you'll be able to crush up to 6 pounds per minute! The adjustable gap setting allows you to customize your grind to the size of the grain, and thanks to the stainless steel construction, you can rest assured that this mill will last as long as its malevolent disposition. Features: Easily adjustable gap setting Hopper holds 10 lbs Mill shaft comes ready to connect to an electric power drill With the drill running at 500 RPM, crush up to 6 lbs/minute Rollers and hopper screws made from stainless steel Frame, hand crank and hopper made from aluminum Please note: This mill is designed for use with brewing grains only. It will not work for cracking whole kernel corn.

  Read more less

  $149.99 $135.79

• Sale -30%

  EVABarrier Double Wall Draft Tubing - 6.3 mm ID x 9.5 mm OD

  6 reviews

  If you're looking for a high-quality draft tubing to take your system into the 21st century, EVABarrier is the clear choice. This double walled tubing offers superior protection against oxidation, CO2 loss and microbial growth. Plus, it's BPA and PVC free! EVA tubing is the future of draft line for professional applications, and now you can rig up your home system with the same first-class tubing. The 6.3 mm (1/4") ID size is recommended to be used as gas line or long draw beverage lines. If you intend to use it as beverage line, we recommend using 20-25 ft. per line for adequate flow resistance. Outer Barrier The outer barrier is made from EVA material and provides a decent stiffness to the tubing while still remaining pliable. This not only makes EVABarrier extremely kink resistant, it also makes it the best tubing to be used with Duotight, John Guest, and other push-in fittings. Inner Barrier The inner barrier is made from a proprietary polymer that acts as an excellent gas barrier. You can rest assured that your beer will be better protected from oxygen exposure, as well as CO2 loss. Your beer will stay fresher for longer and not loose carbonation like with other draft line. With other beverage line, you may notice that beer sitting in the line for an extended period will start to taste flat and/or oxidized. EVA Barrier tubing is unquestionably better in this regard and you will notice a significantly improved freshness of your beer, especially if it's been sitting in the lines for a while. Due to the high density and smooth nature of the EVABarrier inner wall, the internal surface of the tubing is remarkably smooth and almost completely impermeable. This makes it difficult for bacteria and other microbes to attach to the inside surface of the tubing. Just another way EVABarrier is looking out for you and your beer! Direct Connect to Ball Lock Kegs This tubing works seamlessly with Duotight Gas In and Bev Out Ball Lock QDs which allow you to connect your draft lines directly to your ball lock homebrew keg. Be sure to select the correct size QD fittings that correspond to your tubing's outer diameter (OD). Specifications: Inner Diameter - 6.3 mm (1/4") Outer Diameter - 9.5 mm (3/8") PVC, BPA , and Plasticizer Free* Stiff outer wall is kink resistant and easy to use with Duotight fittings Smooth inner wall prevents oxidation, CO2 loss and microbial growth build-up *EVABarrier does not contain plasticizers, or phthalates, that are used to make PVC flexible. These plasticizers are known to leach out into the beer over time and have adverse health effects. Kegland Part number: KL06248

  Read more less

  $6.57 - $153.29

• Sale -31%

  BrewBuilt® 1.5" Tri-Clamp Thermowell

  2 reviews

  The BrewBuilt tri-clamp thermowell allows you to monitor temperatures with digital thermal probes. Perfect for controlling fermentation temperatures on a stainless steel conical using a digital temperature controller. Or use it with an electric boil kettle or hot liquor tank to send temp readings to a PID controller to control your heating element. 1.5" T.C. 4" probe Compatible with 1/4" Ø temp probes Made from 304 stainless steel

  Read more less

  $27.99 $19.24

• 

  Wine Corks - 1 3/4 in. Grade 3

  22 reviews

  A standard length and diameter single punch cork in a high quality grading at a reasonable price. Corks are typically graded on a scale of 1-10, 1 being the best score, based on the degree of porousness that the actual punch of cork exhibits. Cork trees that show a higher population of worms or fungi tend to yield cork crops which are more porous. The Grade 3 corks show less than average porousness and are on par with the quality of cork used in many commercial facilities. Grade 1 & 2 corks are almost completely solid and sell at very high prices. These corks are harvested and punched in Portugal, like the majority of the rest of the corks available today. They are processed, sorted, prepped and packaged here in Northern California.

  Read more less

  $21.99 - $494.99

• Sale -25%

  35L Distillation Lid Replacement Gasket | 3mm

  5 reviews

  Replacement 3mm thick gasket for the 35L Distillation Lid. Note: The 3mm gasket works well with Gen 3 and older BrewZillas and Gen 1 DigiBoils. If you have a newer model, we recommend the 6mm Gasket for a better seal. To improve the seal further, we highly recommend using the Adjustable Lid Clamps with the Distillation Lid if your unit does not have them. KegLand Part Number: KL03490

  Read more less

  $8.79 $6.59

• 

  BrewBuilt® Neoprene Carboy Sleeve

  7 reviews

  Have you been struggling with fermentation temperature swings? The BrewBuilt Neoprene Carboy Sleeve works great for maintaining the internal temperature of your 5, 6, or 6.5 gallon glass carboy. If you aren't fermenting in a temperature-controlled environment your beer is likely rising and falling with the ambient temperature, and these swings can stress out yeast and have a negative effect on the finished product. This 6 mm thick neoprene sleeve will help retain the heat naturally produced by fermentation activity and provide some protection from the ambient environment, leading to more consistent fermentation temps, happier yeast, and less off flavors in your beer. We highly recommend the neoprene sleeve for use with the BrewBuilt Carboy CoolStix. The added insulation will lower the amount of cycles needed to maintain fermentation temperatures and is a must-have for cold crashing.   SKU Size Height (in.) Diameter (in.) FE329A 5 Gal 14.75 10.75 FE329B 6 Gal 17.25 10.90 FE329C 6.5 Gal 17.50 11.20  

  Read more less

  $24.49 - $32.99

• Sale -15%

  ForgeFit® Stainless Tri-Clamp | 3" Clamp

  2 reviews

  Tri-clamp fittings are the gold standard in professional breweries and they've been widely adopted in homebrewing as T.C. kettles, fermenters, and pumps become more widely available. Tri-clamp fittings allow you to make a sanitary connection without any nooks or crannies for contaminants to hide in and they can be cleaned in place. Use anywhere you want to make a sanitary connection. 3" tri-clamp Made from 304 stainless steel ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.

  Read more less

  $12.99 $11.04

• Sale -25%

  Stainless Elbow Barb - 3/8 in. x 1/2 in. MPT

  1 review

  Stainless steel is preferred by those who know!   This heavy duty Stainless Elbow with barb is a versatile piece of hardware for your brewing setup. The 1/2" MPT threaded end attaches to a 1/2" threaded FPT fitting. The barb will accommodate 3/8" ID tubing. Use it anywhere you want tubing to come off at a 90 degree angle.

  Read more less

  $6.59 $4.94

• 

  Recycled HDPE Plastic Can Carrier (6-pack)

  2 reviews

  Easily take your canned creations on the go with these recycled HDPE can carriers. You're probably already familiar with these carriers from bringing home 16 oz can 4-packs from the local brewery or bottle shop. Beer cans snap in and out effortlessly and stack neatly inside the fridge. Fully compatible with our 16.9 and 11.1 oz Can Fresh Aluminum Cans. Made from 100% post-consumer recycled milk jugs and 100% recyclable. 6-Pack Can Carrier Available in Black, White, and Red Made from recycled resin Molded in the USA

  Read more less

  $0.71 - $249.99

• Sale -30%

  KegLand Ball Lock Quick Disconnect (QD) | Gas In | Barbed

  41 reviews

  The most affordable ball lock quick disconnect we offer! White color easily identifies the QD for gas use 1/4" barb connection This white, gas-in quick disconnect comes with a barb for attaching to a beverage line, and its high quality construction creates a sturdy seal that won’t leak gas when in use. The barb measures 1/4 inch, so it is compatible with either 1/4 inch or 5/16 inch beverage tubing.  Note: Sometiems ball lock fittings can be difficult to get fully seated on a Cornelius keg. We recommend using a quick spray of sanitizer solution to act as a lubricant and giving it a few twists while applying the ball lock. Kegland Part Number: KL02943

  Read more less

  $6.59 $4.61

• Sale -20%

  Wort Aerator | Air Pump Kit | Aeration System w/ Filter & Diffusion Stone

  Aerate your wort automatically with this complete aeration system. Includes compact air pump, air filter, diffusion stone, and EVABarrier tubing. This aeration system diffuses oxygen into your wort using the air around you, so there's no need to buy pure oxygen cylinders again and again. The down side is that aeration takes longer than oxygenation. Because the atmosphere is only about 20% oxygen, the diffusion stone must be left running in the wort for approximately 30–120 minutes (but even 5 minutes of aeration is better than shaking the carboy). The sterile filter will prevent contamination during this period, but you will need to monitor the fermenter periodically for possible over foaming. To clean your stainless stone, we recommend boiling it for several minutes and storing it in a zip lock bag between uses. It can clog easily with the oil in your fingers, so use gloves when attaching it to the tubing. NOTE: You will need to use hot water to soften the 4 mm x 8 mm EVABarrier tubing when attaching the stone. Needle nose pliers can help to widen the tubing, if necessary. Hose clamps won't be required once it's attached. You will also need to cut a short piece of tubing to bridge the connection from the air pump to the air filter and the air filter to the diffusion stone. You do not want the air filter to get wet or be inserted into your fermenter, so keep the air filter close to the pump. The sanitary air filter can last up to 1 year, but should be replaced if there are any signs of discoloration. Includes: CE Air Pump 15 micron sintered stainless stone with barb 0.2 micron autoclavable air filter Approximately 5 ft. of EVABarrier tubing (4mm ID x 8mm OD) KegLand Part Number: KL03926

  Read more less

  $27.49 $21.99

• Sale -27%

  Duotight Push-In Fitting - 8mm (5/16 in.) x 8mm (5/16 in.) Male Elbow

  1 review

  This Duotight to Male Elbow fitting can be used to route tubing connecting to 8 mm Duotight Ball Lock QDs. This is a great way to keep tubing organized and out of the way in your kegerator. Compatible with EVABarrier 8 mm OD Tubing (D1717 & D1718). Duotight fittings are high-quality push-in fittings that seal tight and offer superior sealing capacity due to the double O-ring sealing design. High Performance Double O-Ring Design: The secret to Duotight’s superior sealing performance comes from the fact that they use not one, but two high-quality EPDM O-rings. The double O-ring means they have literally twice the sealing surface when compared with other push-in fittings. This makes them more reliable and significantly reduces the chance of leakage. The double O-ring system also means that tubing can be bent at a much tighter radius without causing leaking issues, which can be an issue with other fittings. This combination of factors makes Duotight the most reliable push-in fittings on the market. EPDM offers excellent chemical resistance for a longer life span. When compared with silicone and vinyl, EPDM has much better gas transmission rates, better wear resistance, and is BPA-free. No Clamps Necessary! We recommend cutting your tubing straight, not on an angle, to ensure the line forms a complete seal. To remove the fitting simply push in the collet and the hose can be removed. Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Kegland Part number: KL18456

  Read more less

  $2.19 $1.60

• 

  American Oak Cubes (Stavin) - Heavy Toast

  5 reviews

  Premium, Fire-Toasted Oak Cubes from Stavin Heavy Toast American Oak will impart flavors of char, spice and roasted coffee; with hints of vanilla and butterscotch. These fire-toasted oak cubes are as close as you can come to the full range of flavors you would get from aging your beer in a full sized barrel, unlike convection-toased cubes. The difference is that convection toasted cubes are made by cutting the stave to size, then passing the small cubes through a toasting chamber. Stavin fire-toasts their staves whole, just like they would when making a barrel, and then cuts them down to size. The result is a gradation of toasting from the surface through to the center of the cube, where each different toast level represents a different flavor set that the oak will give your beer. The result is a much more complex and natural profile; by comparison convection toasted cubes taste one dimensional. Oak cubes also release their flavor into your beer more slowly than chips, giving you more control over the final degree of impact in your beer. You should plan on an extended aging period of 1-6 months when using cubes. This longer contact time again promotes flavor complexity by allowing all the flavors of the oak and your beer to marry. Recommended Dosage is 2 oz per 5 gallons for impact equivalent to aging in a brand new oak barrel. Download the PDF

  Read more less

  $7.99 - $529.99

• Sale -25%

  3 Piece Ball Valves - Stainless 1/2 in.

  14 reviews

  This stainless steel ball valve is the perfect match to most homebrewing kettles with a 1/2" coupler or nipple on the bottom.  The 3-piece design makes it easy to take apart and keep clean, preventing any spoilage organism from lingering between batches.  It has a 1/2" FPT inlet and outlet.

  Read more less

  $29.99 $22.49

• Sale -25%

  Mash Paddle Stainless Steel - 36 in.

  22 reviews

  Let this mash paddle unleash your inner Pro Brewer! This 36 inch, 100% Stainless Steel Mash Paddle is perfect for any size mash tun. It can stir large volumes and it’s a snap to clean and sanitize. The paddle itself is a solid piece of stainless steel with no holes in it. Because there are many different theories about mash paddle design, this paddle is left solid so that you can customize the hole pattern to your preferences. If you like, we do offer one drilled configuration, the AG431A.

  Read more less

  $30.99 $23.24

• Sale -5%

  Lallemand | WildBrew™ Helveticus Pitch | Dry Souring Bacteria

  2 reviews

  WildBrew Helveticus Pitch™ is a high-performance, high-purity lactic acid bacteria specifically selected for its ability to produce a wide range of sour beer styles Produces an intense and sharp citrus flavor profile typical of both traditional and modern sour beer styles Styles brewed with this bacteria include, but are not limited to, Berliner Weisse, Gose, lambic-style, American Wild, and Sour IPA Lallemand premium brewing yeast offers brewers unmatched consistency, reliability and purity from one batch of beer to the next WildBrew™ Helveticus Pitch is a ready-to-use dried bacteria, a strain of Lactobacillus helveticus specifically selected for its ability to produce a wide range of sour beer styles. In comparison to WildBrew™ Sour Pitch, the new bacteria produces a more intense citrusy flavor at higher temperatures. Additionally, WildBrew™ Helveticus Pitch will deliver unmatched consistency, effortless application, fully assured performance and unparalleled purity for brewing the sour beer style of your choice. WildBrew™ Helveticus Pitch is recommended at a dosage of 10g/hl to pour directly into the unhopped wort. WildBrew™ Helveticus Pitch is part of a wider set of solutions for sour beer making, which also includes the newly launched bioengineered Saccharomyces cerevisiae yeast Mascoma Sourvisiae® that can produce lactic acid and ethanol simultaneously. Beer Styles: Sours Inoculation Rate: 1g/10L or 10g/hL Aroma: Strong citrus, tangy, intense sour Fermentation Range: 100-113°F pH Range: 3.0 - 3.5 Hop Tolerance: 4 ppm iso-alpha acid / 4 ppm beta acid *See the technical data sheet below for information on rehydration, usage and storage.

  Read more less

  $25.99 - $166.24

• 

  OCI French Oak Cubes | Medium Toast

  1 review

  Convection toasted Oak Cubes made in the US from French Oak. These Oak Cubes impart similar flavors as the equivalent oak type and toast level chip, but extract more slowly giving you more control over the final impact in your beer. These cubes are produced from staves of French oak that have been air-seasoned for 18-24 months, then toasted to a Medium Toast. They will add a sweet, butterscotch note with hints of Vanilla and Spice to your beer. Suggested dosage is 2-4 oz per 5 gallons of beer.

  Read more less

  $9.99 - $764.99

• 

  Columbus / CTZ | Cryo Hops®

  Extremely versatile and well fit for IPAs, Pale Ales, Hazys, Stouts, and Lagers Aroma Profile: Citrus, Dank, Earthy, Woody Alpha Acids: 15.0 – 18.0% Cryo Hop® Hop Pellets Higher AA and nearly twice the resin content of traditional T-90 hop pellets Increase yield by reducing vegetal matter in your brewhouse and fermenter Cryo Hops® provide brewers with the ability to get gigantic hop character while reducing astringent and unpleasant vegetal flavors. With a substantially higher oil and resin content, LupuLN2 powder offers up all the flavor and aroma of a heavily hopped beer, but with a significanly reduced grassy character. Additionally, the lower dosage rate of the concentrated powder reduces the volume of trub and therefore, kettle loss. Using Cryo Hops® you will net more beer that is clearer! Typical usage of Cryo Hops® would be roughly 50% of pellets. LupuLN2 powder can be used in any application where traditional hop products are utilized, including: Bittering, Kettle, Whirlpool and even direct to the fermentor.  It is suggested that you use Cryo Hops® as late additions, in the whirlpool or dry hop, as the volatile aromatic compounds will be driven off if added early in the boil. Cryo Hops® are an innovative hop product that is made by separating the lupulin from the hop flower using cryogenic processing. The result is a product with twice the potency of T90 pellets, with reduced astringency and vegetative material. Note: These hops come pelletized. The powder is compressed into pellet form to make handling easier. Typical Hop Statistics: Alpha Acids: 15.0 – 18.0% Beta Acids: 4.5 – 6.0% Total Oil: 2.0 – 4.0%   Cryo Hops® is a registered trademark owned by Yakima Chief Hops, LLC.

  Read more less

  $2.99 - $220.49

• Sale -25%

  Stainless Barb - 1/2 in. x 1/2 in. Male BSP

  Stainless steel barb fitting. 1/2" male BSP x 13mm barb (0.51"). KegLand Part Number: KL03629  

  Read more less

  $6.59 $4.94

• Sale -23%

  ForgeFit® Stainless Tri-Clamp Rotating Racking Arm | 1.5"

  Stop leaving clean, perfectly good, wine or beer in your tank and always drain from the perfect height with our tri-clover style rotating racking arms. Remove your existing tri-clamp butterfly valve and place this rotating racking arm between the tank and your valve. When it is time to rack off slightly loosen the clamp nearest the tank and use the built-in handle to rotate to just about the lees level. A white rotatable gasket is placed between the welded in tank fitting and this rotating arm. Because the micro finish of the gasket is hard and slippery it allows the rotating arm to rotate in place. A standard black EPDM gasket is placed between the rotating arm and the butterfly valve and is always kept completely tightened. The length of the arm after the elbow is 10.5" allowing you to draw from roughly 8" above or below the valve level. The arm measures 9.5" from the TC fitting to the elbow. We suggest you assemble the rotating arm and butterfly valve in such a way that the arm is pointed in the same direction as the handle on your butterfly valve. In this manner you always know how the racking arm is positioned in your tank. 1.5" tri-clamp Polished finish Made from 304 stainless steel ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.  

  Read more less

  $137.49 $105.20

• 

  Liquor Quik SuperYeast™ X-Press (Turbo Yeast)

  3 reviews

  A unique blend of distiller's yeast and nutrients to give your spirits a boost! Liquor Quik Super Yeast X-Press is the new generation high alcohol turbo that can produce 25 liters (6.5 U.S. Gallons) of 20% alcohol base in as little as 5 days. The new X-Press is completely stackable, which means that you can ferment multiple packs at a time, as long as the sugar, water, and temperature is kept constant. It works by fermentation of a special distiller's yeast and complex blend of nutrients and vitamins. View the instructions, including ways to further increase your alcohol. Available in 135 g and 25 kg sizes.  

  Read more less

  $9.89 - $470.24

• 

  Lallzyme EX-V™ | Fermentation Enzyme For Structured Red Wines

  6 reviews

  Lallzyme EX-V – Enzyme for Structured Red Wines with Enhanced Color and Tannin Stability Extracts color and tannins with improved integration for wines destined for aging Promotes stable anthocyanin-tannin bonding for long-lasting color Enhances mouthfeel, midpalate weight, and structural balance Improves juice yield and reduces solids through efficient cell wall degradation Balanced enzyme activity supports both extraction and finesse in premium red wines Lallzyme EX-V is a precision enzyme blend developed by Lallemand for red wine fermentations where structure, balance, and ageability are desired. It combines strong pectolytic activity with targeted cellulase and hemicellulase functions to break down grape skin cell walls, facilitating the release of anthocyanins and seed-derived tannins in a controlled, integrative manner. EX-V is ideal for varietals with moderate to firm skins or when crafting red wines intended for barrel aging, as it enhances phenolic complexity without over-extracting bitterness or astringency. Wines fermented with EX-V tend to show refined texture, vivid color, and excellent long-term stability. Comparison to Other Lallemand Maceration Enzymes: Compared to EX, which is best for early-drinking, fruit-forward reds, EX-V is designed for more structured, age-worthy styles with higher tannin and color stability.  EX = softer, fruit-driven reds for early release EX-V = structured, balanced reds with aging potential Protocol Dilute Lallzyme EX-V in 10 times its weight of chlorine-free water. Add to crushed grapes or must at the beginning of fermentation. Mix thoroughly for even dispersion. Optimal temperature range: 20–30°C. Avoid adding below 10°C or after alcoholic fermentation begins. Usage Rates Recommended dosage: 30–40 grams per ton of grapes = 0.66–0.88 grams per hectoliter (assuming 450 L/ton) = 0.0066–0.0088 grams per liter = 0.025–0.033 grams per gallon Use the lower end of the range for moderately structured fruit or extended maceration. Use the higher range for tighter-skinned grapes, shorter fermentations, or when greater phenolic extraction and color stability are required for barrel-aged or long-lived reds.

  Read more less

  $2.89 - $148.19

• Sale -18%

  AlcoEngine Copper Alembic Distillation Lid | 6mm Gasket

  3 reviews

  The Alembic Copper Domed lid will help you achieve a smoother, richer, sweeter tasting spirit by helping to remove unwanted sulfur compounds. The large copper surface area acts as a catalyst with distilling vapor to enhance and concentrate flavors and aromas during the distilling process. Primarily intended for use with the Copper Pot Still, but it can also be used with the Copper Reflux still if desired. Note: This lid uses a 6mm gasket to better fit the Gen 4 BrewZilla and Gen 2 DigiBoil. It is also backwards compatible with Gen 3 and older BrewZillas and Gen 1 DigiBoils. To improve the seal further, we highly recommend using the Adjustable Lid Clamps with the Distillation Lid if your unit does not have them. 9-1/2" Tall 12-3/8" Diameter. Please note that copper is a very soft metal and can be dented quite easily. Store and use with care. KegLand Part number: KL1589 Warning: Distilling alcohol without permits or licensing is illegal in many countries, including the United States. It is the customer's responsibility to research their local, state, and federal laws and abide by those laws. Brewmaster is not responsible for any damage or injury caused by either misuse or unlawful use. Stills can also be used to produce essential oils, vinegar, purified water and engine fuel (requires permit in USA).

  Read more less

  $120.99 $98.79

• 

  Lallemand Reduless | Inactivated Yeast with Copper | Fixes H2S Issues

  1 review

  Reduless is a new product from Lallemand that was designed to correct negative VSCs (Voltatile Sulfur Compounds) such as H2S (hydrogen sulfide, A.K.A. "rotten egg") and DMS (dimethyl sulfide, A.K.A. "cooked corn") defects in wine. Made from inactivated yeast that have been infused with copper using a proprietary process, Reduless is a much gentler H2S remedy on the wine than the traditional copper sulfate (CuSO4) treatment alone. If you have an H2S problem, then we recommend treating it with Reduless first. However, if the sulfur problem still remains after the Reduless treatment, then a bench trial with copper sulfate (CuSO4) is recommended. Note: The sooner you catch a sulfur problem the easier it is to deal with! To Use: Dissolve Reduless in 10 times it's weight in water and add immediately to the wine. Stir the wine gently to ensure a thorough homogenization. Rack or filter after 72 hours. Recommended Dosage: 0.4-0.6 g/gal. The maximum amount of copper that can be released into the wine using Reduless at the recommended dosage is 0.02 ppm.  

  Read more less

  $2.49 - $201.39

• 

  Lalvin ICV D21® | Dry Wine Yeast

  ICV-D21 is the ideal choice for winemakers seeking to craft structured, full-bodied wines with bold aromatics and enhanced mouthfeel Whether perfecting a Cabernet Sauvignon, enhancing the richness of Syrah, or adding depth to Chardonnay, ICV-D21 consistently delivers complexity, elegance, and age-worthiness in every bottle Enhanced mouthfeel and rich aromatics for structured red and white wines ICV-D21 is a robust wine yeast strain specially developed by the Institut Coopératif du Vin (ICV) for crafting full-bodied red and white wines with enhanced mouthfeel and complex aromatics. Known for its ability to optimize tannin extraction and promote rich color stability, ICV-D21 is ideal for producing age-worthy wines with layered depth and intense fruit expression. Its consistent fermentation kinetics ensure reliable attenuation and balanced structure in high-Brix musts. Enhanced Mouthfeel: Promotes a smooth, velvety texture with well-structured tannins. Aromatic Complexity: Boosts expressions of dark berries, plum, and subtle floral notes. Alcohol Tolerance: Effective up to 16% ABV, allowing for rich, full-bodied wine production. Temperature Range: Performs optimally between 64°F (18°C) and 86°F (30°C), providing flexibility for various winemaking styles. Medium Flocculation: Contributes to clarity and stability post-fermentation. Low SO₂ Production: Preserves aromatic purity and minimizes off-flavors. Applications: Cabernet Sauvignon: Enhances bold fruit expression and promotes structured tannins. Merlot: Boosts plum and cherry notes while improving mouthfeel. Syrah: Elevates dark fruit and peppery spice with deep color extraction. Grenache: Enhances ripe red fruit flavors with a smooth finish. Chardonnay: Promotes complexity and rounded mouthfeel with subtle floral accents. Flavor Profile: Dark Fruits: Highlights blackberry, plum, and cherry with concentrated richness. Spice and Floral Notes: Accentuates hints of violet, licorice, and black pepper. Structured Tannins: Integrates smooth tannins for enhanced mouthfeel and aging potential. Aging Potential: Supports long-term aging, improving depth and complexity over time. Usage: Rehydration: Rehydrate in 10 times its weight of chlorine-free water at 95°F (35°C) for 15–20 minutes. Stir gently to prevent clumping. Pitch Rate: Use 1–1.5 grams per gallon (0.25–0.4 grams per liter) for optimal fermentation and flavor development. Nutrient Addition: Supplement with yeast nutrients, particularly in low-nitrogen musts, to ensure complete fermentation. Fermentation Temperature: Maintain between 64°F and 86°F for optimal tannin extraction and aromatic development. Extended Maceration: Ideal for long maceration periods to intensify structure and deepen flavor complexity. Download the PDF Download the PDF

  Read more less

  $2.99 - $812.99

• Sale -25%

  S/S Bulkhead 1/2" FPT x 1/2" FPT

  2 reviews

  This stainless steel bulkhead is 1/2" FPT x 1/2" FPT with a flat, thick rubber washer that makes is very easy to install on most kettles. You will need to drill a 1" hole to install the bulkhead. 

  Read more less

  $18.99 $14.24

• Sale -15%

  Brass Hose Fittings - Female Hose x 1/2 in. FPT

  1 review

  Female Garden Hose Thread on one side, 1/2" FPT on the other. Useful piece for adapting Quick Disconnects to Wort Chillers or Water Filters.

  Read more less

  $3.89 $3.30

• Sale -19%

  4 in. Tri-Clamp Lid with Ball Lock Posts, PRV & Floating Dip Tube

  1 review

  This stainless 4" tri-clover ball lock lid is a direct replacement to the lid that comes on our kegmenters.  Installation Note: For best performance, ensure there is not an excess amount of slack when the silicone dip tube is installed and shorten it if needed. With the floating dip tube installed on your empty Kegmenter, you ideally want the dip tube to hang freely with just enough length for the end of the dup tube to touch the bottom of the keg.

  Read more less

  $60.99 $49.39

• 

  Lallemand | Go-Ferm Sterol Flash™ | Reydrate Yeast in Cold Water

  Improves fermentation kinetics and aroma production Allows yeast to be rehydrated in cool water (60°F) without any loss of viability or vitality Eliminates the need for acclimatization steps—rehydrated yeast can be added directly to juice or must after 15 minutes Requires 50% less water than Go-Ferm™ or Go-Ferm Protect Evolution™ Non-clumping, instantly disperses in cool water Go-Ferm Sterol Flash™ is a revolutionary new yeast rehydration nutrient that is fast, simple to use, and saves time, labor, and water without compromising on yeast viability and vitality. Derived from autolyzed yeast, Go-Ferm Sterol Flash™ provides optimized levels of micronutrients (vitamins and minerals) and extremely high levels of survival factors including sterols and unsaturated fatty acids. Go-Ferm Sterol Flash™ has the highest bioavailability of sterols and is produced with a specific Lallemand micro agglomerated process, for instant dispersion during the rehydration step. When suspended in cool water, the high content of sterols are quickly released and integrated in the yeast membrane within 15 minutes. The high content of sterols reinforces the permeability and fluidity of the yeast membrane. Go-Ferm Sterol Flash™ increases yeast viability, yeast vitality, and optimizes wine yeast aroma precursors assimilation under any conditions in red, rose, and white wine fermentation. With Go-Ferm Sterol Flash™, no yeast acclimatization steps are required before inoculation in must. Go-Ferm Sterol Flash™ is a revolutionary yeast rehydration protector with instant dispersion in cool water for a more reliable alcoholic fermentation and wine yeast sensory impact. Use: Use at a rate of 1.25 g Go-Ferm Protect per 1 g of yeast. A rough approximate of weight is 1 tsp = 3.2 grams. We highly recommend using a scale to weigh the product for an accurate dose. We do not recommend relying on these rough conversions for accurate dosage rates. Download the PDF Store in a cool and dry environment at 65°F. Once opened, keep tightly sealed and dry.

  Read more less

  $3.49 - $445.54

• Sale -25%

  Yakima Chief Hops® | Ekuanot® Brand HBC 366 Hops | T-90 Hop Pellets

  Pronounced aromatic characteristics that add a wonderful flavor to beer styles like IPAs and Pale Ales With a high AA%, this hop can also be used as an early boil addition for bittering Type 90 Hop Pellets Ekuanot® was originally released in 2014 and has surged in popularity and growing acreage. The ridiculously high oil content (2.5-4 ml/100g!) and desirable aromatics have lead breweries of all sizes to flock to this hop. Great for all beer styles but definitely featured in IPAs and other hop forward beers. Ekuanot® is described as having aromas of melon, berry, orange peel, lime, papaya, pine and fresh peppers. Try it in your next batch and see what flavors you find! YCH Lot# P91-HUEKU7171 — Option 7171 Lot Analysis Chart This lot was noted to display intense stone fruit, citrus and tropical character up front, with floral, melon, and pomme notes in the background Alpha Acids - 14.5% Total Oil (mL/100g) - 2.8 Sourced from C&C Hop Farms and Carpenter Ranches Hop Statistics: Alpha Acids: 14.5% Beta Acids: 4.7% Total Oil (mL/100g): 2.8 B-Pinene: 0.4% Myrcene: 25% Linalool: 0.3% Caryophyllene: 12.7% Fernesene: 0.5% Humulene: 22.6% Geraniol: 0.7%

  Read more less

  $1.86 - $15.99

• 

  Champagne Stoppers - White Plastic

  4 reviews

  Plastic champagne stoppers for standard champagne bottles. White plastic. Features plastic fins that secure stopper in bottle. To use plastic champagne stoppers, fill standard champagne bottles, leaving approximately 1 to 1.25 inches of headspace. Insert the stopper and drive down with a mallet or use the Cork n Tie machine (WE305). Attach a wire hood to secure the stopper. Height: 46.50mm Head diameter: 30.50mm Stem height: 30.50mm Stem Diameter: 20mm  

  Read more less

  $4.39 - $56.99

• Sale -25%

  Glass Jug w/ Screw Top Finish | Finger Grip Handle | Clear | 1/2 Gallon | 64 oz

  5 reviews

  Half gallon clear glass jug with finger handle molded into glass. Uses 38mm screw tops (sold separately). Bottle Specifications: Capacity: 64 fl Oz Height: 10.4 inches Outside Diameter: 4.8 inches Case QTY: 6 Pallet QTY:  54 cases

  Read more less

  $4.49 - $1,349.99

• Sale -10%

  Insulated Cooler Mash Tun | Hot Liquor Tank | 14 gal.

  5 reviews

  If you're ready to step up to all grain brewing, this converted insulated cooler works wonders as a mash tun! The 14-gallon size can hold upwards of 25 lbs of grain, so there's plenty of room for even the strongest 5-gallon beer recipes and is perfect for most 10 gallon batches up to 1.070 SG. Comes pre-assembled with stainless steel perforated false bottom, high temperature silicone tubing, and 1/2" female threaded ball valve. Pair the valve with the male threaded fitting (plus a little plumber's tape) that best suits your setup and you'll off and running. The cooler also works perfectly as a Hot Liquor Tank. Use with the false bottom in place, or simply remove it and keep it on hand in case you decide to use the cooler as a Mash Tun down the road. Two of these coolers plus the Fermentap Sparge Arm Assembly work perfectly as a gravity fed all-grain setup. To connect the cooler's ball valve to the sparge arm assembly, we recommend a 1/2" MPT x 3/8" Barb fitting and 3/8" ID silicone tubing. Plumber's tape will ensure you have a leak-proof connection between the barb fitting and the ball valve. Includes: Insulated beverage cooler Max Volume: 14.7 Gal (56 L) Stainless dome-shaped perforated false bottom High temperature silicone tubing Stainless 1/2" BSP ball valve External Dimensions: Approx. 19" L x 19" W x 22" H KegLand Part Number: KL04671 Please note: the mash tun may come with a little extra silicone tubing than what's needed. Check that your false bottom is sitting flat and in the middle of the cooler and cut off excess tubing if needed.

  Read more less

  $175.99 $158.39

• Sale -15%

  ForgeFit® Stainless Tri-Clamp | 4" Clamp

  Tri-clamp fittings are the gold standard in professional breweries and they've been widely adopted in homebrewing as T.C. kettles, fermenters, and pumps become more widely available. Tri-clamp fittings allow you to make a sanitary connection without any nooks or crannies for contaminants to hide in and they can be cleaned in place. Use anywhere you want to make a sanitary connection. 4" tri-clamp Made from 304 stainless steel ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.

  Read more less

  $17.49 $14.86

• Sale -30%

  Silicone Fermentation Airlock for Mason Jars

  2 reviews

  Perfect for mason jar food fermentations. The one-way silicone airlock allows gas from fermentation activity to escape without letting oxygen in. No need to burp the jar or mess with water-filled cup airlocks. Fits most wide-mouth mason jars, and can be used with the standard metal locking ring for the lid.  

  Read more less

  $3.99 $2.79

• Sale -15%

  Glass Fermentation Jar | 1 Gallon | No Lid | 100mm Lug Finish

  2 reviews

  Wide mouth jar for small batch fermentations or storing pickled food items Large 3.9" diameter opening 100-2055 Lug Finish neck (lid not included) 128 oz (1 Gal) capacity Widemouth glass jars are great for fermenting small batches of fruit wines, beer, vinegars, lacto fermented foods, and more. The 100 mm (3.9") wide opening is large enough to add product, and to reach your hand in for cleaning. Lids are not included, see our 100 mm lug finish metal lids: FE309A. 1 gallon widemouth jars are sold individually, and come packed 4 to a case. We suggest buying a case quantity of 4 to reduce the chance of breakage in transit. Please note: the example image shows a unit with continuous threads. These jars have a lug finish.

  Read more less

  $4.99 $4.24

• Sale -10%

  Rubber Stopper - #5-1/2 With Hole

  #5 1/2 natural latex rubber stopper with 3/8 inch hole. Also called a size 5.5.   Size: 0.94 - 1.1 inches To create a solid stopper, simply use a #000 solid stopper (FE400) to plug the hole.

  Read more less

  $0.99 $0.89

Show more products