Reusable Nylon Mesh Bags are an indispensable part of any brew day.
These food-grade nylon mesh bags are available in a range of sizes and with either a fine or a medium mesh weave, which make them both more versatile and a better value than disposable cloth muslin bags. These bags are used for a wide range of different applications during brewing and fermentation.
Used to add pellet hops to the boil or as a dry hop in the fermenter. Retains the vast majority of the hop material, making for clearer beer and easier transfers. Can also be used to add smaller amounts of other adjuncts to the boil or fermenter, such as orange peel, oak, spices, etc. 8 x 15 inch bag will hold up to 2 oz of whole hops or 4 oz of pellet hops after they swell up. Features a handy drawstring to keep the bag closed and tie it off to your kettle handle, spoon or mash paddle.
Measures 8 in x 15 in, with hole size in mesh of approximatley 0.4-0.8 mm is size.
You love making beer. You give careful attention to each step in the brewing process. That’s why having a simple yet elegant way to complete one of those steps is indispensable. This fine mesh bag makes adding hops to your brew, and then removing them again, a breeze! The ultra-fine mesh fabric keeps most of the hop material from entering your fermenter. Great for additions of pellet hops during the boil! It also works well for dry hopping in the keg, with pellet or whole hops.
Note: Dry hopping with pellets in a keg using this bag will throw a little matter into your beer, but it settles out pretty quickly and we have had good luck with this procedure.
Perfect size for 1-4 ounces of pellets or 1-2 ounces of whole hops.
Can also hold specialty grains
Reusable
Easy to clean
Great price
Bag size is 9 in. x 12 in, with hole size in mesh of approximatley 0.4-0.8 mm is size.
Great for smaller kettles to do Brew in a Bag recipes or just for steeping grains. Made from nylon this bag comes with a drawstring and measures 15 in. x 15 in, with hole size in mesh of approximatley 0.4-0.8 mm is size.
Clean-in-place your BrewZilla by using the built-in low volume pump Recirculate brewery wash and let the CIP Spray Rotor do the work! Only requires a 6W pump to spin the rotating head and get full effectiveness Easily adapted for use to clean fermenters and other vessels Finally! A CIP spray head designed specifically for use with smaller homebrew pumps. There are a lot of stainless steel CIP Spray Balls readily available for homebrewers but they require a fairly beefy pump to spin the head and make it effective. The new Low Volume CIP Spray Rotor can provide full spray coverage with as little flow rate as 3 gallons per minute. This makes cleaning your BrewZilla an absolute breeze by simply recirculating cleaning chemicals and letting the CIP Rotor spray down the inside of your brewery. Also a great option for brewers using the MKII Magnetic Drive Pump as the spray head can easily be adapted to clean all sorts of fermenters. What Can it Do? Clean-in-place your 35L, 65L or 100L BrewZilla. Simply cut your recirculation hosing, or purchase additional silicone hosing to get the right length for your setup. You will be able to find the optimum length required by testing with water first. We found great success using the glass lid to start with to see if it is coating everything that you need it to. Recommended for low voltage pumps as low as 6W up to 25W (roughly 3–5 GPM). If using a more powerful pump, you may need to throttle back the flow rate so you don't overpower the spray rotor. Includes: Custom molded rotating spray head with 1/2" BSP thread 11.8" (300mm) length of silicone tubing suitable for your BrewZilla recirculation arm Stainless nut and barb Please note: The rotating spray head can only be used in the downwards position, it cannot be tilted or mounted sideways or upside down. KegLand Part Number: KL04329
Add this neoprene jacket to your BrewZilla or DigiBoil to speed up heating!
Heating is 10% faster and heat loss from the boiler is reduced by 50%
Remove the jacket after the boil to speed up chilling
Thick, insulating neoprene is secured to the boiler body with a sewn-on hook and loop fastener strap
Add some insulation to your BrewZilla or DigiBoil to get better boils! This jacket will fit all 65 L sizes and help keep the heat in for quicker and more vigorous boils. Slap it on to speed up heating; take it off to speed up chilling.
This jacket will fit Gen 3.1.1 and older BrewZilla models. It is not compatible with Gen 4 BrewZillas.
Features:
10% faster heat up time
50% less heat loss from boiler
Fits the 65L Brewzilla and DigiBoil
Left cut out for the valve
Right cut out for the bottom handle
Made from thick neoprene, which is easy to wash after use
Kegland Part Number: KL08921
Reusable Nylon Mesh Bags are an indispensable part of any brew day.
These food-grade nylon mesh bags are available in a range of sizes and with either a fine or a medium mesh weave, which make them both more versatile and a better value than disposable cloth muslin bags. These bags are used for a wide range of different applications during brewing and fermentation.
Perfect for adding large amounts of whole hops to your boil, or to contain your malt in Mini-Mash brewing. Can easily hold 5 lb of milled grain. Note that this bag DOES NOT have a drawstring.
Measures 24 in x 24 in, with hole size in mesh of approximatley 0.4-0.8 mm is size.
Hot side hop additions should stay in the kettle and out of the fermenter. Keep all that hop matter from transferring out with your wort using this Adjustable Hop Filter. At 6" diameter and 14" tall, this unit will do well with even the hoppiest beers you brew. Conveniently hangs on the inside of your kettle so you can remove it at any point if needed. The adjustable hook is great for positioning the filter based on the size of your kettle and the volume of wort you're boiling. When fully extended, you can lower the basket an extra 9 inches into the kettle. The perfect filter for brewers that occasionally run a half batch using a large boil kettle. This is a great alternative to hop bags which have the potential to decrease hop utilization compared. While using this filter basket you can add hops directly to your kettle for maximum wort exposure.
Made from 304 stainless steel
Adjustable hanging hook
14" H x 6" Ø
Smaller home brews should still produce results that are just as tasty as larger batches, which is why this 5 Gallon Stainless Steel Kettle is an excellent addition to your home brew setup. This small 5 gallon brewing kettle is a great kettle for the beginning brewer to learn on, as it holds a manageable sized batch and it’s available for a very affordable price.
Although this brew kettle is quite economical, it’s also made of high quality 202 stainless steel that is anything but cheap. The 0.5-mm thick sides and bottom are more than thick enough for this amount of liquid, and the riveted stainless steel handles on the kettle’s body make it easy to carry even when filled. This 5 gallon kettle can safely hold up to 3 gallons of wort while boiling, making it the perfect size for extract brewing right in your own home!
Features:
0.5mm thick stainless sides and bottom
10" H x 12.5" D
Riveted Handles on Kettle Body
Kettle Lid with riveted handle
5 gallon full capacity (3 gallons while boiling)
Perfect size for Extract Brewing!
All the crucial features of a top-shelf brew kettle at an incredible price! These kettles are the perfect choice for new brewers leaving the kitchen stove and stepping up to the full boil brewing method Made from stainless steel throughout which is easy-to-clean and offers a lifetime of reliable use Two welded 1/2" ports for common threaded brewing accessories—ball valve and barb fitting are included for the bottom port Internal volume markers make it easy to measure pre boil volume and post boil volume Silicone grips made for comfortable, slip-free handling If you’re searching for a fully featured brew kettle but don't want to break the bank, the Brewmaster 8.5 Gallon Stainless Brew Kettle will certainly do the trick. Made of 100 percent stainless steel and available for a truly amazing price, this reliable brew kettle is perfect for first-time brewers and experienced home brewers alike. Two ½-inch couplers are welded to the side of the kettle, and the bottom coupler can even be threaded on the inside of the kettle to use with a diverter or a kettle tube screen. These kettles are upgraded with Silicone Grip Handles and Stamped volume markers on the inside, making brew day that much easier. Add an AG405 (domed false bottom) to this stainless brew kettle and you can even use it as a mash tun. Includes a ball valve and a threaded adpator to 3/8" barb for easily attaching transfer tubing. Also included is a thread 1/2" plug for the thermometer port. Thermometer is not included and can be added at any time. Features: 8.5 Gallon Stainless Steel Brewmaster Brewing Kettle Two Welded 1/2" Full Couplers allow for internal and external attachments Stainless 1/2" Full Port Ball Valve & nipple included for bottom Coupler Stainless 1/2" Plug included for top coupler Stamped Volume Markers Silicone Handle Grips Internal Threading allows for conversion to Mash Tun or addition of whole hop filters Internal Dimensions: 13.75" Tall x 13.75" Ø 1 mm thick walls Made from 201 Stainless Steel Approximate Internal Dimensions 13.75" tall 13.75" wide. This item does not work with induction burners A ball valve, nipple, and plug are included for the welded couplers. A thermometer, false bottom, or kettle screen can be added separately
Suitable for both hops and steeping grains. We highly recommend using a steeping bag for hops to keep vegetal matter contained in the boil kettle and out of your fermenter. If you use a counterflow chiller or plate chiller for cooling, filtering hops is even more important as these devices can clog if too much hop matter passes through them.
The hop sock does not have a drawstring. You will want to tie the end in a knot to keep it closed.
Dimensions:
150 mm wide (5.9")
800 mm long (31.4")
KegLand Part Number: KL01281
Hot side hop additions should stay in the kettle and out of the fermenter. Keep all that hop matter from transferring out with your wort using this Double Handle Hop Filter. At 6" diameter and 14" tall, this unit will do well with even the hoppiest beers you brew. Conveniently hangs on the inside of your kettle so you can remove it at any point if needed. The double handle design will keep the basket nice and steady compared to single handle units. This is a great alternative to hop bags which have the potential to decrease hop utilization. While using this filter basket you can add hops directly to your kettle for maximum wort exposure.
Brewing all grain beer? This hop filter is also perfect as secondary filter when transferring wort from your mash tun to your boil kettle. If any tiny bits make it past your false bottom, the hop filter will catch them.
Made from 304 stainless steel
Double handle design
14" H x 6" Ø
A great addition to the small brewers equipment lineup for mixing of small all grain batches, or to dissolving Malt Extract more easily.
24 inches overall length. Handle is 5 inches long.
Add this neoprene jacket to your Gen 4 BrewZilla to speed up heating!
Heating is 10% faster and heat loss from the boiler is reduced by 50%
Remove the jacket after the boil to speed up chilling
Thick, insulating neoprene is secured to the boiler body with a sewn-on hook and loop fastener strap
Sparge arm sleeve included to reduce heat loss during mash recirculation
Add some insulation to your BrewZilla to get better boils! This neoprene jacket will help keep the heat in for quicker and more vigorous boils. Slap it on to speed up heating; take it off to speed up chilling. Also includes a neoprene sleeve for the recirculation arm to reduce heat loss during the mash.
This jacket will fit Gen 4 BrewZilla models. It is not compatible with older generations of BrewZillas and DigiBoils due to where the cutouts on the jacket are located.
Features:
10% faster heat up time
50% less heat loss from boiler
Fits the 65L BrewZilla Gen 4
Made from 8 mm thick neoprene which is easy to wash after use
KegLand Part Number: KL24372
Don't run away from this Evill Twin! Instead, run toward and embrace it like a long lost sibling. The Evill Twin Roller Mill is the perfect sidekick for any brewer needing to grind malted and non-malted barley, corn and other grains. Operation is smooth and easy thanks to the longer mill shaft. Unlike other manual mills, the crank on the Evill Twin connects to the shaft far enough away from the mill body that you won't scrape your knuckles on the grain bucket with every revolution. Better yet, the mill shaft comes ready to hook up to an electric power drill with no extra parts needed. Run your drill at 500 RPM and you'll be able to crush up to 6 pounds per minute! The adjustable gap setting allows you to customize your grind to the size of the grain, and thanks to the stainless steel construction, you can rest assured that this mill will last as long as its malevolent disposition.
Features:
Easily adjustable gap setting
Hopper holds 10 lbs
Mill shaft comes ready to connect to an electric power drill
With the drill running at 500 RPM, crush up to 6 lbs/minute
Rollers and hopper screws made from stainless steel
Frame, hand crank and hopper made from aluminum
Please note: This mill is designed for use with brewing grains only. It will not work for cracking whole kernel corn.
Let this mash paddle unleash your inner Pro Brewer! This 36 inch, 100% Stainless Steel Mash Paddle is perfect for any size mash tun. It can stir large volumes and it’s a snap to clean and sanitize. The paddle itself is a solid piece of stainless steel with no holes in it. Because there are many different theories about mash paddle design, this paddle is left solid so that you can customize the hole pattern to your preferences. If you like, we do offer one drilled configuration, the AG431A.
If you're ready to step up to all grain brewing, this converted insulated cooler works wonders as a mash tun! The 14-gallon size can hold upwards of 25 lbs of grain, so there's plenty of room for even the strongest 5-gallon beer recipes and is perfect for most 10 gallon batches up to 1.070 SG. Comes pre-assembled with stainless steel perforated false bottom, high temperature silicone tubing, and 1/2" female threaded ball valve. Pair the valve with the male threaded fitting (plus a little plumber's tape) that best suits your setup and you'll off and running. The cooler also works perfectly as a Hot Liquor Tank. Use with the false bottom in place, or simply remove it and keep it on hand in case you decide to use the cooler as a Mash Tun down the road. Two of these coolers plus the Fermentap Sparge Arm Assembly work perfectly as a gravity fed all-grain setup. To connect the cooler's ball valve to the sparge arm assembly, we recommend a 1/2" MPT x 3/8" Barb fitting and 3/8" ID silicone tubing. Plumber's tape will ensure you have a leak-proof connection between the barb fitting and the ball valve. Includes: Insulated beverage cooler Max Volume: 14.7 Gal (56 L) Stainless dome-shaped perforated false bottom High temperature silicone tubing Stainless 1/2" BSP ball valve External Dimensions: Approx. 19" L x 19" W x 22" H KegLand Part Number: KL04671 Please note: the mash tun may come with a little extra silicone tubing than what's needed. Check that your false bottom is sitting flat and in the middle of the cooler and cut off excess tubing if needed.
Low watt density heating element gently warms your fermenting beer without scorching Keep your fermentation temperature consistent during the colder months or raise the temp on command for diacetyl rests Connect directly to the BrewBuilt X3 Uni Conical via the dedicated 2" tri-clamp port for effective, in-solution heating Smooth, stainless steel construction is easy to clean after use Compatible with all sizes of X3 Uni Conicals Add this Immersion Heater to your BrewBuilt X3 Uni Conical for the ultimate control over your fermentation temperature. Connecting directly to the X3's dedicated 2" T.C. port at the side of the cone, the Immersion Heater will provide gentle, effective heating whenever you need it. A must-have for brewers living in colder climates or if you want the peace of mind that your temperature will never drop too low for your ale or kveik strains regardless of the time of year. Heating your fermenter on command can also come in handy if you need to bring your chilled wort up to temp before pitching, or if you need to perform a diacetyl rest after fermentation is complete. We recommend pairing the Immersion Heater with a temperature controller like the Inkbird so it will only be powered on as needed. If using the heater alongside the IceMaster Max 2 glycol chiller, you can insert the Max 2 temp probe into the X3's thermowell first and then insert the Inkbird's probe behind it. Both probes will be deep enough to get accurate temp readings and heating & cooling will be regulated by independent controllers. Another setup option is using the IceMaster 100 and the BrewBuilt Chiller Pump Kit. The IceMaster 100 does not come with built-in pumps so you can add your own submersible pumps as needed. Each Chiller Pump Kit includes an Inkbird controller and a submersible pump. The heater and pump are then both plugged into the Inkbird so heating & cooling are regulated by a single controller. The element runs at 125 watts when powered with the included IEC x 110V plug adapter (not pictured). Specs: 125W @ 110-120V (500W @ 220-240V) Total Length: 16" Length in Conical: 12" Cord Length: 5 ft. KegLand Part Number: KL35941 Please Note: The Warmking Wizard Wand is only compatible with X3 BrewBuilt Conicals. If interested in heating a previous generation conical, see the BrewBuilt Conical Heaters here.
Ripple-style electric brewing heating element with 1.5" tri-clamp connection. With 5,500 watts of power, this unit will easily heat 20+ gallons of wort. Measures 4" wide and 14.5" from TC connection to tip of element. Specs: 5,500 watts 240 Volt L6-30 plug 30 Amp breaker required In order to avoid injury or death we strongly recommend using a GFCI in any circuit used near water. You can find one here.
All the crucial features of a top-shelf brew kettle at an incredible price! Perfectly sized for 15 gallon batch brewers Made from stainless steel throughout which is easy-to-clean and offers a lifetime of reliable use Two welded 1/2" ports for common threaded brewing accessories—ball valve and barb fitting are included for the bottom port Internal volume markers make it easy to measure pre boil volume and post boil volume Silicone grips made for comfortable, slip-free handling If you’re searching for a fully featured brew kettle but don't want to break the bank, the Brewmaster 18.5 Gallon Stainless Brew Kettle will certainly do the trick. Made of 100 percent stainless steel and available for a truly amazing price, this reliable brew kettle is perfect for first-time brewers and experienced home brewers alike. Two ½-inch couplers are welded to the side of the kettle, and the bottom coupler can even be threaded on the inside of the kettle to use with a diverter or a kettle tube screen. These kettles are upgraded with Silicone Grip Handles and Stamped volume markers on the inside, making brew day that much easier. Includes a ball valve and a threaded adpator to 3/8" barb for easily attaching transfer tubing. Also included is a thread 1/2" plug for the thermometer port. Thermometer is not included and can be added at any time. Features: 18.5 Gallon Stainless Steel Brewmaster Brewing Kettle Two Welded 1/2" Full Couplers allow for internal and external attachments Stainless 1/2" Full Port Ball Valve & nipple included for bottom Coupler Stainless 1/2" Plug included for top coupler Stamped Volume Markers Silicone Handle Grips Internal Threading allows for conversion to Mash Tun or addition of whole hop filters Internal Dimensions: 18" Tall x 17.75" Ø Made from 201 Stainless Steel Approximate Internal Dimensions 18" tall 17.75" wide. 1.2 mm thick walls This item does not work with induction burners A ball valve, nipple, and plug are included for the welded couplers. A thermometer, or kettle screen can be added separately
This domed false bottom works great with most 10 gallon insulated cooler mash tuns or kettles with a similar diameter. The dome shape design adds strength so it can handle a heavy load of grain. Comes with 13 mm (.51") barb which is perfect for 1/2" ID silicone tubing.
Made from 304 stainless steel. 30 cm (11.8") diameter.
KegLand Part Number: KL01250
For use with the 35L BrewZilla Boiler Extension Kit. It does not come with an extra Wire Malt Pipe Support Ring. If you're using the extended malt pipe with the 35L DigiBoil, you will need to purchase the ring separately. If you're using the malt pipe with the 35L BrewZilla you can either move your ring up to the boiler extension, or buy an additional ring so you can remove the malt pipe in two steps. You will also need the Ricirculation Arm Extension to continue using the BrewZilla's recirculation arm. Compatible with Gen 3 / Gen 4 BrewZillas. KegLand Part Number: KL26468
An excellent, attractive upgrade to your Braumeister!
This stainless steel domed hood helps trap heat to get your brew up to boiling faster, and promotes a more vigorous, rolling boil. The open top still allows for DMS to be blown off during the boil and can be connected to an exhaust pipe to carry steam out of your brew space.
As an extra benefit, the dome can be fitted to the Braumeister upside down and used as a funnel to help when doughing in your malt.
A real must-have!
Compatible with all generations of Braumeister, made before or after 2015.
This premium Polypropylene Base Board is for the MaltZilla Motorized Grain Mill. Perfect for slotting over a food grade bucket, or building your own little shelf on wheels.
Board Dimensions - 17.75" x 13.5" x 3/8"
Kegland Part Number: KL17077
Used on a commercial brewing system to shut off electricty or gas before the kettle runs dry. This horizontal float switch conveniently fits into a 1.5" tri-clamp port. It is designed to control the run-dry circuit in an electric brewing system. The contacts are intended to control a relay, contactor, or SSR and should not be used to interrupt full power to an electric element/burner.
50W. The unit is not fit to use on a circuit load, but suitable for signal output.
Tired of using gravity or siphons to transfer wort from your Braumeister to your fermenter? This device uses the Braumeister's built in pump to move the wort, even if your Braumeister is below your fermenter!
Features:
Only works with 20 or 50 Liter Braumeisters
Works with both standard and Braumeister Plus models
Pumps wort to a fermenter even when placed higher than the Braumeister
Includes stainless pipe, pump plug, valve, and about 5 ft. of silicone tubing
Plate heat exchangers are one of the fastest ways to cool your wort and the Chillout is one of the best. The Chillout MKIV, now with new and improved male 1/2" BSP threaded posts, is the fastest way to chill your wort to yeast pitching temperature to get your fermentation off to a quick healthy start. made from stainless steel and brazed together with pure copper. It also has ripples along each plate that create more surface area to improve heat transfer. A great addition to your brewing setup.
Set up one side with Wort in & out, and Water out & in on the other side.
Features:
Made from stainless steel and copper
Rippled plates for more surface area
1/2" Male BSP connections
Dimensions: 12.4" x 2.8" x 2" (not including threads)
KegLand Part Number: KL21234
For use with the 65L BrewZilla Boiler Extension Kit. It does not come with an extra Wire Malt Pipe Support Ring. If you're using the extended malt pipe with the 65L DigiBoil, you will need to purchase the ring separately. If you're using the malt pipe with the 65L BrewZilla you can either move your ring up to the boiler extension, or buy an additional ring so you can remove the malt pipe in two steps.
You will also need the Ricirculation Arm Extension to continue using the BrewZilla's recirculation arm.
Compatible with 65L Gen 3 / Gen 4 BrewZillas.
Example image of the 35L model shown here.
KegLand Part Number: KL32834
The original all-in-one brewery still made in Germany!
5" touchscreen is easy to use and guides you through the brewing process
Brew all-grain beer inside your home—no gas burner needed
Built-in cooling jacket eliminates the need for awkward wort chillers
2R interior stainless finish with electropolished heating coil
The "Mercedes®" of brewing systems. When you want the best, this is it.
Never ceasing to improve upon the original Braumeister design, Speidel has taken this unit a step further with the new 5" touch screen control panel. The new automatic control system brews with your custom recipes and guides you through the brewing process. Now with integrated WiFi and bluetooth as standard, recipes and software updates can be synced automatically. Speidel Braumeister continues to be the all-in-one brewing system for brewers that demand the highest quality.
The Braumeister is the original all-in-one, electric all-grain brewing system. Designed and patented in Germany over a decade ago, it has since been copied around the world. Still made in Germany today by Speidel, a 5th generation German stainless steel manufacturer, the Braumeister is the Mercedes® of brewing systems. Speidel made a decision to not try and compete on price with the rest of the all-in-one machines that are made in China. They actually went the opposite direction improving upon the Braumeister many times. They've improved the control screen, added dimpled jackets to eliminate wort chillers, improved the programming and functionality, and created an online myspeidel.com control center along with multiple other small refinements. They also created a host of optional equipment to further enhance your brewing. If you appreciate really well-made equipment, the Braumeister is for you. It is the best of the best.
The welded on dimpled jacket eliminates the need for a separate wort chiller and also opens the door for using the Braumeister as a temperature controlled fermenter—see the video below. These jackets have 1" male threading, and aside from cooling, a Dump Valve tap has been added to the base of the unit to make emptying and cleaning that much easier.
Advantages of the Braumeister
First, the system has a small footprint and is powered by electricity, allowing you to brew inside, in a confined space, without the inherent dangers of using an open flame. Secondly, this unit is very easy to use as you mash the grain and then boil the wort in the same vessel. We also love the automation and control. Before you brew you set the controller with the different temperatures you wish to attain (advice is given on what to set) and the built-in heating element and pump do the rest. The Braumeister is especially ideal for step-mashing, which many brewers think is the preferred way to brew lager beers. Based on the results of lagers we have brewed on this machine, MoreBeer! agrees. Unlike other brew systems that have the temp probe located at the bottom, the Braumeister's temperature sensor was installed inside the middle bar. This means that the temperature is measured directly in the malt and is even more accurate in combination with the new software adjustments.
Walking Through the Brew Process
On Brew Day, you are going to assemble your Braumeister with the mash tub and bottom screen. You will fill the unit with filtered water to a notch on the center post - easy. The water resistant touchscreen controller reads in °C or °F, and you can set it to different temperatures you wish to reach. Advice is given in the manual. When your water is the correct temperature, a beep alerts you to add grain. Stir in your grain, lock down the top screen (so now there is a screen on the bottom and the top) and start the mash. During the mash wort is constantly recirculated through the grain bed from the bottom up, reverse of most all-in-one systems. The liquid wort flows up through the mash and then cascades down between the mash tub and the outer wall of the Braumeister. There it is collected by the pump and pushed back through the mash. At any time, you can pause the pump from the controller screen. Speidel upgraded their pump to be detachable for easy cleaning and maintenance between batches. When the mash is complete, another beep will alert you to remove the entire mash tub, which sets on top of the Braumeister to drain for a period of time. At this point you can choose to rinse the mash with hot water or to just add water directly the wort. Push another button and the boil starts and will run for however long you program it. When the boil stops, begin chilling your wort.
Features:
Brew in the tightest of spaces, anywhere in your home with a small footprint of counter space
Easy to handle brewing and cleaning, malt pipe slides up with little effort
Patented malt pipe technology. Wort is internally pumped from the bottom to the top for effective and gentle recirculation. No pipes are awkwardly mounted to the side of the kettle
Clean, contactless cooling by running cold water through the welded-on cooling jacket. No need for sanitizing and storing a separate immersion wort chiller
The pump is accessible beneath the unit and can be detached for cleaning and maintenance
Braumeister stays up-to-date with regular software updates via an integrated WiFi module
myspeidel.com syncs with the digital controller on your Braumeister
Enter a recipe in myspeidel.com, choose a recipe from the community of other users, or design a recipe in Beersmith and import it to myspeidel.com and it will come up automatically on your Braumeister's touchscreen controller
Edit your recipe on the fly in the touchscreen controller and it will automatically update on myspeidel.com
When the brew day is over, ferment your beer inside the Braumeister, using the cooling jacket to control the fermentation temp
Technical Specifications for 20L Braumeister:
110V - comes with a NEMA 5-20 plug. You may need to install the corresponding wall socket or use an adapter.
Produces 23L of wort, which is about 20L of finished beer
Controllers can store up to ten recipes for easy repeat brewing!
2,000-watt built-in heating capacity
23-watt pump
110V, 50-60Hz, 18.2A
Max Grain Capacity: 13.2 lbs
Max Fill Level: 25L (Upper Marking on Center Rod)
23.6" H x 15.7" Ø
33 lbs
Have a weak burner that needs an upgrade? Putting together your own 3 Vessel brewing system? Then this burly Multi-Jet burner is just the ticket.
Twenty individual jets combine to produce heat that will boil your water or wort in a hurry. Should be installed and connected by a professional plumber.
Specifications:
Cast Iron body with Brass burner jets
2-3" Flame Height
8" Ring Diameter
1/2" Female Pipe Thread Inlet
20 Jets
This item is not intended for indoor use.
NOTE: This accessory is designed exclusively for 3-vessel brewers who want to use the BrewZilla or DigiBoil as a mash tun. It is not meant to be used alongside a malt pipe, and it is not intended to be an upgrade or replacement to the BrewZilla's standard false bottom protection screen.
If you're a 3-vessel brewer and want to use the BrewZilla or DigiBoil purely as a mash tun, this is false bottom will give you more volume compared to mashing with a malt pipe. Designed for use with DigiBoil electric kettles or BrewZilla all-in-one systems. Unlike two-piece false bottoms you may find, this unit is welded together for maximum strength. It will easily withstand as much grain weight as you could possibly fit in the vessel. Features welded handles to easily remove the false bottom when cleaning.
Compatible with 65L DigiBoils and Gen 3/4 65L BrewZillas.
Dimensions:
Diameter: 15.35" (390 mm)
Height: 1.88 (48 mm)
Approximate Dead Space: 1.5 gal (5.7 L)
KegLand Part Number: KL27717
This is a replacement BrewZilla PPSU Sight Glass tube. This is a one size fits all sight glass for multiple models and sizes. You will need to cut down the 39" PPSU tube to fit your specific model of BrewZilla depending on the length of the recirculation arm. We recommend purchasing the Pipe Cutter to cut the tube cleanly. If your unit did not already include the sight glass, Gen 3 and Gen 4 BrewZillas can be upgraded with one of these sight glass kits. See the video below showing you how to measure and install this on a BrewZilla. Specifications: 39.3" (100cm) Long 0.51" ID x 0.59" OD (13mm ID x 15mm OD) Temperature Rating: 356°F (180°C) KegLand Part Number: KL3380
The original all-in-one brewery still made in Germany!
5" touchscreen is easy to use and guides you through the brewing process
Brew all-grain beer inside your home—no gas burner needed
Built-in cooling jacket eliminates the need for awkward wort chillers
2R interior stainless finish with electropolished heating coil
The "Mercedes®" of brewing systems. When you want the best, this is it.
Never ceasing to improve upon the original Braumeister design, Speidel has taken this unit a step further with the new 5" touch screen control panel. The new automatic control system brews with your custom recipes and guides you through the brewing process. Now with integrated WiFi and bluetooth as standard, recipes and software updates can be synced automatically. Speidel Braumeister continues to be the all-in-one brewing system for brewers that demand the highest quality.
The Braumeister is the original all-in-one, electric all-grain brewing system. Designed and patented in Germany over a decade ago, it has since been copied around the world. Still made in Germany today by Speidel, a 5th generation German stainless steel manufacturer, the Braumeister is the Mercedes® of brewing systems. Speidel made a decision to not try and compete on price with the rest of the all-in-one machines that are made in China. They actually went the opposite direction improving upon the Braumeister many times. They've improved the control screen, added dimpled jackets to eliminate wort chillers, improved the programming and functionality, and created an online myspeidel.com control center along with multiple other small refinements. They also created a host of optional equipment to further enhance your brewing. If you appreciate really well-made equipment, the Braumeister is for you. It is the best of the best.
The welded on dimpled jacket eliminates the need for a separate wort chiller and also opens the door for using the Braumeister as a temperature controlled fermenter—see the video below. These jackets have 1" male threading, and aside from cooling, a Dump Valve tap has been added to the base of the unit to make emptying and cleaning that much easier.
Advantages of the Braumeister
First, the system has a small footprint and is powered by electricity, allowing you to brew inside, in a confined space, without the inherent dangers of using an open flame. Secondly, this unit is very easy to use as you mash the grain and then boil the wort in the same vessel. We also love the automation and control. Before you brew you set the controller with the different temperatures you wish to attain (advice is given on what to set) and the built-in heating element and pump do the rest. The Braumeister is especially ideal for step-mashing, which many brewers think is the preferred way to brew lager beers. Based on the results of lagers we have brewed on this machine, MoreBeer! agrees. Unlike other brew systems that have the temp probe located at the bottom, the Braumeister's temperature sensor was installed inside the middle bar. This means that the temperature is measured directly in the malt and is even more accurate in combination with the new software adjustments.
Walking Through the Brew Process
On Brew Day, you are going to assemble your Braumeister with the mash tub and bottom screen. You will fill the unit with filtered water to a notch on the center post - easy. The water resistant touchscreen controller reads in °C or °F, and you can set it to different temperatures you wish to reach. Advice is given in the manual. When your water is the correct temperature, a beep alerts you to add grain. Stir in your grain, lock down the top screen (so now there is a screen on the bottom and the top) and start the mash. During the mash wort is constantly recirculated through the grain bed from the bottom up, reverse of most all-in-one systems. The liquid wort flows up through the mash and then cascades down between the mash tub and the outer wall of the Braumeister. There it is collected by the pump and pushed back through the mash. At any time, you can pause the pump from the controller screen. Speidel upgraded their pump to be detachable for easy cleaning and maintenance between batches. When the mash is complete, another beep will alert you to remove the entire mash tub, which sets on top of the Braumeister to drain for a period of time. At this point you can choose to rinse the mash with hot water or to just add water directly the wort. Push another button and the boil starts and will run for however long you program it. When the boil stops, begin chilling your wort.
Features:
Brew in the tightest of spaces, anywhere in your home with a small footprint of counter space
Easy to handle brewing and cleaning, malt pipe slides up with little effort
Patented malt pipe technology. Wort is internally pumped from the bottom to the top for effective and gentle recirculation. No pipes are awkwardly mounted to the side of the kettle
Clean, contactless cooling by running cold water through the welded-on cooling jacket. No need for sanitizing and storing a separate immersion wort chiller
The pump is accessible beneath the unit and can be detached for cleaning and maintenance
Braumeister stays up-to-date with regular software updates via an integrated WiFi module
myspeidel.com syncs with the digital controller on your Braumeister
Enter a recipe in myspeidel.com, choose a recipe from the community of other users, or design a recipe in Beersmith and import it to myspeidel.com and it will come up automatically on your Braumeister's touchscreen controller
Edit your recipe on the fly in the touchscreen controller and it will automatically update on myspeidel.com
When the brew day is over, ferment your beer inside the Braumeister, using the cooling jacket to control the fermentation temp
Technical Specifications for 10L Braumeister:
110V - comes with a NEMA 5-20 plug. You may need to install the corresponding wall socket or use an adapter.
Produces 10L of wort, which is about 8.5L of finished beer
Controllers can store up to ten recipes for easy repeat brewing!
1,200-watt built-in heating capacity
9-watt pump
110V, 50-60Hz, 15A
Max Grain Capacity: 6.2 lbs
Max Fill Level: 12L (Upper Marking on Center Rod)
19" H x 11.8" Ø
22 lbs
This BrewZilla PPSU sight glass stainless steel ball valve and elbow use radial seal O-rings to form a strong, leak-free connection. Two in the ball valve and two in the bottom elbow. When assembling the sight glass to upgrade your existing Gen 3 or Gen 4 BrewZilla, you will reuse the female camlock x female 1/2" fitting that comes on the recirculation arm, or you need to purchase a separate fitting for the end of your custom build. You will also need plumbers tape or food grade Loctite to assemble the ball valve with the camlock fitting. Rather than purchasing the parts separately, Gen 3 and Gen 4 BrewZillas can be upgraded with one of these sight glass kits. KegLand Part Number: KL33817
Pumping off the mash tun is the easiest way to collapse the screens. It is recommended that you either put a tee and a vacuum breaker ahead of the pump or run the wort into a grant and pump off the grant. Controlling the pump with restriction, a VFD, or a dual level float switch is ideal.
This tall cylindrical grant has three 1.5" tri-clamp ports and a silicone tube for a sight glass. The narrow design helps to reduce surface area and hot side aeration. The inlet and outlet side ports are raised a few inches above the conical dish bottom dump, which helps to separate grain sediment from the wort.
40L / 10.5 gal
Made from 304 stainless steel
Ships without valves
This is a 1/6" DIN Relay Output controller with PID. It is compatible with many probe types including our PT100s. This reads Celsius only. 220V supply.
Easily replace your larger Braumeister tubing with this 32 ft (10 m) replacement hose kit. Preinstalled fittings make this the best choice for a backup tubing set.
Specifications:
Length 32 ft (10 meter)
Pressure limit: 6 bar (87 PSI)
Temperature limit: 275° F (135 ° C)
Inner diameter: 1 inch (25 mm)
Outer diameter: 1.5 inches (38mm)
Replaces Tubing Set on 200 or 500 liter Braumeisters
Insulated walls for safety and energy efficiency. Made from 304 stainless steel with passivated internal 2B polished finish Oversized volume large enough for mashing and sparging without needing to top off. Features sight gauge and tapered bottom with center drain Made with condensation trap to keep flue condensation out of your liquor Internal float switch located just above the heating elements to protect the elements from running dry Ships domestically from within the contiguous United States MB Pro Brewing Systems are very well constructed and represent an amazing overall value. They also boast a very impressive feature set. Our 7 bbl Pro Electric Hot Liquor Tank features three 15,000W heating elements, insulated walls for energy efficiency, condensation ring, and a host of other key features guaranteed to satisfy the expectations of today's pro brewer. A float switch is pre-installed just above the heating elements, which is intended to protect your elements from running dry. The device comes unwired and needs to be included in a circuit in order to function. Great Quality from MB Our brewing systems are made at a family owned manufacturer in the Ningbo region of China. Ningbo is where most premium beer tanks and brewing vessels come from and represents a known style and level of quality when compared to other areas of China. Our professional brewhouse equipment is designed by our in-house R&D designer Colin Kaminski, a former brewmaster for 15 years. Cleanability, ease of use, and durability are our primary design criteria. Our manufacturing partner in China is a father/son team that takes great pride in what they do. Some discount dealers buy from different manufacturers who offer one-off deals. That can be fine one time but not the next. Great Value from MoreBeer! Pro If you used MoreBeer! as a homebrewer, you may not know that MoreBeer! & MoreBeer! Pro combined is one of the largest brewing supply companies in the world with over 250,000 customers. We’ve seen countless homebrewers turn pro, and there’s nothing that makes us happier than being a part of that transition. As a privately owned brewing supply company that's been in business for over 25 years, we’ve established relationships with suppliers and manufacturers around the world and at every level of the industry. We get a great price and we pass that on to you. All Features: Oversized to allow mashing and sparging without having to top off Insulated walls for safety and energy efficiency Condensation Trap so no flue is used Sight Gauge to check volume Fill Port Tapered Bottom w/ Center Drain Float Switch to protect the electric elements from running dry (wiring required)
Powered by (3) 15,000-watt 3-phase 208V elements Total Amperage Draw: 125 amps at 3ph 208V The kettle must be grounded
PT10 Temp Sender Analog Temp Gauge for quick reading Internal LED Light Specifications for 7 bbl HLT: Grade 304 Stainless Steel Internal Finish: #2B Tank Height: 83" Tank Diameter: 48" Empty Weight: 660 lbs Working Volume: 9 bbl Max Volume: 10.4 bbl All ports are 1.5" TC except for DN350 Manway, DN19 Condensation Pipe, 4" TC CIP Port, 2" TC Element Ports, 4" Welded Vent Please note: this unit is supplied without controls for the electric elements. You will need to supply your own control panel. Power requirements listed represent actual amperage draw. Please consult a licensed electrician to determine what amperage breaker is required based on your local codes. Please Note: This item requires a professional electrician for installation. Please Contact our Customer Service department at 1-800-600-0033 to assess shipment costs and place an order.
Insulated walls for safety and energy efficiency. Made from 304 stainless steel with passivated internal 2B polished finish Oversized volume large enough for mashing and sparging without needing to top off. Features sight gauge and tapered bottom with center drain Made with condensation trap to keep flue condensation out of your liquor Internal float switch located just above the heating elements to protect the elements from running dry Ships domestically from within the contiguous United States MB Pro Brewing Systems are very well constructed and represent an amazing overall value. They also boast a very impressive feature set. Our 3.5 bbl Pro Electric Hot Liquor Tank features three 9,000W heating elements, insulated walls for energy efficiency, condensation ring, and a host of other key features guaranteed to satisfy the expectations of today's pro brewer. A float switch is pre-installed just above the heating elements, which is intended to protect your elements from running dry. The device comes unwired and needs to be included in a circuit in order to function. Great Quality from MB Our brewing systems are made at a family owned manufacturer in the Ningbo region of China. Ningbo is where most premium beer tanks and brewing vessels come from and represents a known style and level of quality when compared to other areas of China. Our professional brewhouse equipment is designed by our in-house R&D designer Colin Kaminski, a former brewmaster for 15 years. Cleanability, ease of use, and durability are our primary design criteria. Our manufacturing partner in China is a father/son team that takes great pride in what they do. Some discount dealers buy from different manufacturers who offer one-off deals. That can be fine one time but not the next. Great Value from MoreBeer! Pro If you used MoreBeer! as a homebrewer, you may not know that MoreBeer! & MoreBeer! Pro combined is one of the largest brewing supply companies in the world with over 250,000 customers. We’ve seen countless homebrewers turn pro, and there’s nothing that makes us happier than being a part of that transition. As a privately owned brewing supply company that's been in business for over 25 years, we’ve established relationships with suppliers and manufacturers around the world and at every level of the industry. We get a great price and we pass that on to you. All Features: Oversized to allow mashing and sparging without having to top off Insulated walls for safety and energy efficiency Condensation Trap so no flue is used Sight Gauge to check volume Fill Port Tapered Bottom w/ Center Drain Float Switch to protect the electric elements from running dry (wiring required)
Powered by (3) 9,000-watt 3-phase 208V elements Total Amperage Draw: 75 amps at 3ph 208V The kettle must be grounded
PT10 Temp Sender Analog Temp Gauge for quick reading Internal LED Light Specifications for 3.5 bbl HLT: Grade 304 Stainless Steel Internal Finish: #2B Tank Height: 61" Tank Diameter: 47" Empty Weight: 375 lb Working Volume: 4.5 bbl Max Volume: 5.1 bbl All ports are 1.5" TC except for DN350 Manway, DN19 Condensation Pipe, 4" TC CIP Port, 2" TC Element Ports, 4" Welded Vent Please note: this unit is supplied without controls for the electric elements. You will need to supply your own control panel. Power requirements listed represent actual amperage draw. Please consult a licensed electrician to determine what amperage breaker is required based on your local codes. Please Note: This item requires a professional electrician for installation. Please Contact our Customer Service department at 1-800-600-0033 to assess shipment costs and place an order.
Replacement Tie Rod / Level Indicator for 200L Speidel Braumeister.
Note: This unit does not contain the temperature sensor that is in the new units, making it incompatible with new Braumeister units that came out in late 2020.
Speidel Part Number: 77347
A stainless platform designed for the full malt pipe to be lowered onto it and rolled to a point of disposal. Extremely convenient for large batches.
Specifically sized to the 500l Brau, this unit is equipped with sturdy wheels, designed to make mash disposal that much easier!
