Corny Kegs, Homebrew Kegs, and Keg Parts

Remove the keg spear from your sanke kegs for cleaning and maintenance For use with US-standard D-Style sanke kegs Safe and easy hand operation Easily and safely remove the valve and spear on American Sanke kegs with this Sanke Valve/Spear Removal Tool from MoreBeer! This economical tool is available for a very competitive price when you order from MoreBeer!, and it is great for anyone who needs to remove their spear on a Sanke keg for cleaning or to repair damage. Note that this tool only presses the spear down to relieve pressure on the retaining ring, you will have to remove the ring by hand.

Read more less

Pin Lock QD Adjustable Pressure Relief Valve

Read more less

Keep your beer colder for longer with the insulating neoprene material Prevent dings and scratches during transport with an internal bump cap Easily carry your keg using the removable shoulder strap The zippered design makes it simple to put on and take off Tailormade for the 4L Oxebar Mono PET Keg Keep your beverage colder for longer with the Oxebar Neoprene Jacket. This parka is more than just a cozy sleeve for your keg; it's designed with a rigid internal "bump cap" to prevent those annoying scratches and scuffs that can happen when your keg is being moved around. Made from durable neoprene, this jacket helps maintain the temperature of your beverage, whether you're taking it to a party or just keeping it chilled in the fridge. The Oxebar Neoprene Jacket protects your keg while helping your beer stay crisp and cold. KegLand Part Number: KL4288

Read more less

Track your beverages stats right on the keg or fermenter. These reusable tags will adhere to any smooth surface and have a white board finish so you can write on them with dry erase markers. Great for keeping notes and following the development of your brew from grain to glass.  

Read more less

This bev out ball lock bulkhead assembly allows you to add a ball lock post just about anywhere. Use in conjunction with the gas in bulkhead to create your own pressure vessel. The included short dip tube can be replaced with a longer dip suitable to your needs. 1/4" BSP threads and locking nut. Kegland Part Number: KL03162

Read more less

This gas in ball lock bulkhead assembly allows you to add a ball lock post just about anywhere. Create your own pressure vessel or attach it to one of our aluminum gas manifolds for a quick connect option. 1/4" BSP threads and locking nut. Kegland Part Number: KL03179

Read more less

Hang a bag, stainless hop ball, or oak strip from this tab that is welded onto the bottom of a keg lid. This is a product to use for aging your beer on oak cubes, dry hopping, adding cacao nibs - any post-keg addition of ingredients you can think of! To use, simply thread the string of your hop bag into the hole and tie off. When it is time to remove your adjunct/hops, pull the lid off of the keg and replace with a normal one. This really enables you to control the exact time your beer sits on the hops, oak, etc. and makes their removal a cinch! Kegland Part Number: KL02868

Read more less

A replacement pull-ring style relief valve for your favorite keg!   This is the most common relief valve. Fits most Cornelius and Firestone style kegs, along with many others. Features a long body with spring, and gray top with pull ring.    Max. pressure rating: 100 psi   Kegland Part Number: KL03070

Read more less

Perfect for serving your craft creations on the go or making a compact home draft system that fits inside your refrigerator Welded from the inside out using a specialized technique for superior, more sanitary welds compared to similar mini kegs Interlocking chimes for easy and secure stacking of multiple mini kegs KegLand's Small Stainless Steel Mini Beer Kegs are ideal for homebrewing small batches and serving your craft creations directly from your home fridge. These compact kegs are designed for convenience and versatility. Flexible Dispensing and Carbonation You can naturally carbonate your beer using priming sugars or, for a more controlled approach, force carbonate and serve with the Ball Lock Tapping Head. The Tapping Head features a flexible silicone dip tube, allowing you to dispense beer whether the keg is standing upright or lying on its side. The dip tube will sink and draw liquid from the bottom, allowing you to orient the keg whichever way is more convenient in your refrigerator. Superior Quality and Durability KegLand's mini kegs are built to last, undergoing acid bath electrolysis to passivate the stainless steel, making them exceptionally resistant to rust. These are the only mini kegs on the market that are welded from the inside out using a specialized technique. This results in a superior, more sanitary welding finish compared to other mini kegs. When you choose a KegLand mini keg, you're investing in the highest quality available, surpassing the standards of other mini kegs of similar design. Low2 Lid O-Ring The sealing cap features an O-ring made of KegLand's special Low2 material which offers vastly improved oxygen barrier properties compared to silicone or EPDM, resulting in your beverage staying fresher for longer. Expand Your Setup with Accessories Enhance your mini keg experience with a range of available accessories, including neoprene jackets for insulation and compact tapping systems for easy dispensing. Stackable with the 5L and 10L Mini Keg. Specs: 8L / 2.1 Gal / 270 fl oz 16" High x 6.8" Diameter (280mm x 175mm) Max Working Pressure: 45 PSI / 3 Bar Made from 304 Stainless Steel KegLand Part Number: KL06378  

Read more less

Connect two ball lock homebrewing kegs together via their ball lock our fittings. Handing for moving sanitizer or beer from one keg to the next. We often use this fitting when we have a big party where we dixie chain kegs together.  For example if you made 10 gallons of pale ale you can use this jumper to connect the two kegs so that all 10 gallons can pour at once.  

Read more less

A great way to repair your keg, even if you're not sure what type you have! This poppet works on all of the kegs that we sell, Pin or Ball lock! Poppets are pretty easy to damage or lose while cleaning your keg, and having a couple extra universal poppets on hand is a great way to make sure that you can always serve your homebrew! Compatible with our ball and pin lock replacement body connects - KEG460G, KEG470G, KEG1100, KEG1101.

Read more less

Super-sized corny keg, great for bigger batches and fermentation Low2 lid O-ring reduces oxygen ingress by 96% compared to silicone O-rings when measured in a keg! Brand new, all-stainless construction ball lock keg Stackable with ball lock quick disconnects in place Etched In and Out labels near the keg posts for easy identification Rolled handles for a comfortable grip Made by an ISO certified commercial keg manufacturer with high-quality laser welded seams Look out below! The Torpedo Keg Depth Charge series just dropped and they're set to send blast waves through the homebrew world. Large-scale homebrewers will appreciate the ability to fit their entire batch into a single 10-gallon ball lock keg, and you can expect the same great features that have made Torpedo Kegs such a hit. Laser welded construction for superior quality, rolled stainless steel handles that will last a lifetime, and stackable design that won't interfere with your fittings. Quality First The first thing we at MoreBeer! check out is interior welds. We've spent a decade rejecting kegs made overseas because the interior welds have never met our standards. If a weld is not perfect and shows evident burn marks along with nooks and crannies it cannot be sanitized effectively. These kegs are machine welded and exceed our standards for quality. The weld quality is possible because these kegs made by an ISO certified commercial keg manufacturer. Cool Features Torpedo Kegs were designed to stack with Ball Lock quick disconnects in place and serving, which is a cool feature for some brewers who have vertical space in their refrigerator. We also like the rolled stainless steel handles. They are comfortable to grab and will never come off like some rubber handles can over time. In and Out is etched near the keg posts for easy identification, which is very handy when you are connecting lines in a refrigerator or kegerator and trying not to make a mistake. Low2 Keg Lid O-ring Give your beverage the absolute best protection from oxygen staling with the Low2 keg lid O-ring. Even the most perfectly sealed keg is susceptible to oxygen ingress through the hatch O-ring—yes, even if the keg is under constant pressure with CO2! Even a leak-free, pressurized keg will release CO2 molecules as they pass through the lid O-ring itself, and conversely, Oxygen molecules will permeate through the O-ring and diffuse into the keg when they reach the surface area on the other side. The level of permeability is wide ranging and highly dependent on what material the O-ring is made from. Rather than the usual EPDM or Silicone, Low2 gaskets are made from a unique composition of Synthetic M-Class and Cross-Link Elastomers. This special blend has superior oxygen barrier properties that results in your beverage staying fresher for longer. Specifications: Total Capacity: 10.1 gal. Max Pressure: 130 psi PRV Rating: 85 psi Height: 18.5" Diameter: 16.05" Made from 304 Stainless Steel

Read more less

Dip tube o-rings compatible with all homebrew ball lock or pin lock kegs. Slide the o-ring onto the dip tube and then place the dip tube back in the keg. Comes in a convenient zip lock bag.  

Read more less

These neoprene keg sleeves are custom tailored to fit the standard line of Torpedo Kegs. We were tired of poorly designed sleeves that dragged in the mud and interfered with fittings. The Torpedo Keg Sleeve is designed to only cover the area that needs insulation, leaving the chimes bare and the fittings easily accessible. These little guys will keep your keg colder longer, and give it a clean look while doing so. The sleeves are 6mm thick and feature stitched piping on the edges for exceptional durability. Make sure you get the correct sleeve for your Torpedo keg as we sell two different diameters. For Slimline Torpedo Keg sleeves see KEG651. The 5-gallon sleeve is also compatible with 1/6 bbl or sixtel commercial sanke kegs. SKU Size Diameter Height KEG650A 1.5 gal 9.125" 6" KEG650B 2.5 gal 9.125" 10" KEG650C 5 gal 9.125" 18"

Read more less

For the gas in side. Stainless steel construction, approximately 1.5" in length.

Read more less

Replacment foot for cornelius style keg lid for homebrewing.  This fit on the end of the swing arm latch on the keg lid. They often crack with age and need to be replaced. 

Read more less

You'll love the convenience of using this complete gas tubing assembly for draft beer dispensing. This Gas Tubing Assembly includes a ball lock gas-in quick disconnect fitting, 5 feet of 5/16" gas tubing, and two hose clamps. It's more convenient than having to hunt down all of the individual parts yourself. You'll find several places you can use this assembly in your homebrewing configuration.

Read more less

Give your beverage the absolute best protection from oxygen staling with KegLand's Low2 O-rings! Made from a special blend of materials, these gaskets offer vastly improved oxygen barrier properties compared to Silicone or EPDM The result is your beverage staying fresher for longer! Compatible with KegLand's 20L Oxebar Mono PET Keg These seals replace the red O-ring seal inside the 20L Oxebar keg lids. What is Low2? Low2 O-rings are the new golden yellow standard of homebrew kegs brought to you by KegLand. Why? Because of their unique composition (Synthetic M-Class and Cross-Linked Elastomers), they have superior oxygen barrier properties than that of the previous silicone O-rings. This results in your beverage staying fresher for longer. The same Low2 O-ring material was independently tested on 5-gallon stainless steel kegs by GunnLab, an Australia-based plastic packaging testing laboratory. See below for a printout of the test results. KegLand Part Number: KL38003

Read more less

Keep your beer colder for longer with the insulating neoprene material Prevent dings and scratches during transport with an internal bump cap Easily carry your keg using the removable shoulder strap The zippered design makes it simple to put on and take off Tailormade for the 8L Oxebar Mono PET Keg Keep your beverage colder for longer with the Oxebar Neoprene Jacket. This parka is more than just a cozy sleeve for your keg; it's designed with a rigid internal "bump cap" to prevent those annoying scratches and scuffs that can happen when your keg is being moved around. Made from durable neoprene, this jacket helps maintain the temperature of your beverage, whether you're taking it to a party or just keeping it chilled in the fridge. The Oxebar Neoprene Jacket protects your keg while helping your beer stay crisp and cold. KegLand Part Number: KL42895

Read more less

Remove a threaded keg spear from your Sanke kegs for cleaning and maintenance Compatible with D-Style and S-Style threaded spears Attaches directly to the 1/2" drive of an impact driver or pneumatic rattle gun This keg opening tool attaches directly to a 1/2" drive so it can be used with an impact driver or pneumatic rattle gun. This makes fitting and removing keg spears really fast and can save a ton of time when working with a high volume of kegs. Compatible with D-Style and S-Style kegs with threaded spears. There are two styles of Sanke kegs, those with a threaded-in spear and those that use a retaining ring, or circlip, to hold in the spear. This tool is designed for use with D- or S-Style Sanke kegs with threaded spears. For the more popular (in the USA) D-Style circlip-style Sanke kegs, use tool KEG860. Please Note: this tool does not remove the retaining ring. Once the keg has been depressurized, you will have to remove the ring by hand. KegLand Part Number: KL14908

Read more less

Replacement Beverage Dip Tube for the standard Torpedo Kegs.

Read more less

Possibly the smallest keg you can make that will fit a corny-style keg lid. This half gallon ball lock keg works perfectly as a pressurizable growler that doesn't require any special fittings or accessories beyond the ball lock draft equipment you probably already own. If you've been considering a permanent soda water line on your draft system, this is the ideal keg to use with the KegLand Continuous Soda Carbonator Keg Lid. The low volume of this corny keg will allow the Carbonator Keg Lid to almost instantly carbonate water as it refills the keg after every pour. This little guy also works great as a line cleaning keg using a small batch of cleaning solution. 5.9" W x 9.9" H KegLand Part Number: KL20893

Read more less

This silicone elbow is a replacement for the elbow provided in the PCO38 Tapping Head Kit. Allowing for a 90° connection between the barb on the yellow liquid plastic carbonation cap and the 6.3 mm OD dip tube provided in the kit. KegLand Part Number: KL26260

Read more less

These neoprene keg sleeves are custom tailored to fit the Slimline Torpedo Kegs. We were tired of poorly designed sleeves that dragged in the mud and interfered with fittings. The Torpedo Keg Sleeve is designed to only cover the area that needs insulation, leaving the chimes bare and the fittings easily accessible. These little guys will keep your keg colder longer, and give it a clean look while doing so. The sleeves are 6mm thick and feature stitched piping on the edges for exceptional durability. Also compatible with standard cornelius kegs. For standard Torpedo Keg sleeves see KEG650. SKU Size Diameter Height KEG651A 1.5 gal 8.25" 6.25" KEG651B 2.5 gal 8.25" 10.5" KEG651C 5 gal 8.25" 20"

Read more less

Another great invention coming out of Ss Brewtech, the Keg WaSsher! This is a hands free, clean in place keg washer that will make cleaning kegs one of the easiest steps of the brewing process. Gone are the days of disassembling your keg to clean it. The cleaning process is pretty simple. Just take the keg lid off, attach the keg washer, attach both ball lock QDs, stick the whole thing upside down in a bucket full of sanitizer, turn on the pump and your keg is clean. The Keg WaSsher is designed to fit in a standard 5 gallon bucket. It also only uses 2 gallons of cleaning solution resulting in less chemical waste and evironmental impact. If you want to get fancy, you can set up a wash station with 3 buckets to perform an initial cleaning, fresh water rinse, and sanitizer. All you have to do is lift the whole apparatus from one bucket to the next! Features: Hands free operation Chemical resistant submersible pump Attaches to common ball-lock Cornelius-style kegs w/ removable lids Powerful CIP spray ball Entire assembly fits in 5-gallon bucket Cleans inside of keg and ports simultaneously Easily attaches/detaches from kegs Perform clean, rinse, and sanitize steps all with the same unit

Read more less

New Kegs are trouble-free for years Rubber top and bottoms protect floors from dings Perfect laser welds ensure easy sanitation and reduced risk of contamination Made in Italy by AEB, a long-time manufacturer with impeccable attention to detail Imagine this…. you’re out camping with friends, and one of your buddies says he would love to have a cold brew. Then just picture the looks on their faces as you pull your brand new Cornelius Keg out of your cooler, full of your rich home brew! This 2.5 gallon corny keg is perfect for the serious home brewer who loves to brew ½ batches, or is just tight on kitchen space. It will fit pretty much anywhere from coolers to backpacks, in your keezer, or in your fridge. You’ll love the rubber tops on these 2.5 gallon kegs because they have two handles and are easier to stack! It is versatile, travels well and just looks cool! The quality of these Italian-made cornelius kegs is undeniable. They are welded by laser under inert gas which means there are no nooks or crannies where bacteria can hide. They may cost more than kegs made in China but the quality difference is a perfect batch versus a ruined one. Quality is important because your beer may sit in these kegs for months. If bacteria gets into a bad weld they are going to very hard to kill. Key Features: High quality Italian made ball-lock style kegs with rubber top and bottom Kegs are 15" tall, x 8.25" diameter and weigh 7.5 pounds. Max working pressure of 130 PSI.

Read more less

This special converter fitting allows you to easily convert back and forth between commercial kegs and homebrew style cornelius kegs with ease. They fit on the beer or gas side of a sanke tap, and instead of the standard clamped line connection that can't be changed, allow use to connect via a male flare swivel thread. Male flare is the same style of fitting found on homebrew quick disconnects.    Please view the you might also need products below for the correct female flare fittings to install on your draft line.   Kegland Part number: KL05159  

Read more less

Replacement curved dip tube for the beer side out on Cornelius style ball lock kegs. Made from Stainless Steel. Does not include the dip tube gasket.  

Read more less

Convert any pinlock keg over to a ball lock keg. Ideal for any homebrewer that has their home draft setups already assembled with ball lock fittings. Includes both gas and beverage body connects.

Read more less

Due to high demand, the 2.5 and 5 gal are currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory.   Everything you need to start enjoying your delicious beer on draft! No longer will you need to clean, sanitize, fill, and cap 50+ beer bottles Includes brand new KOMOS CO2 Cylinder and robust KOMOS Dual Gauge CO2 Regulator Featuring the hottest homebrew keg around—the all-stainless, stackable Slimline Torpedo Keg EVABarrier beer & gas line with Duotight Quick Disconnects and adapter fittings The KOMOS Homebrew Kegging Kit has everything you need to start enjoying your delicious creations on draft. Whether you've brewed one batch or one hundred batches, you're already familiar with the laborious process of bottling your beer. Cleaning, sanitizing, filling and capping 50+ 12 oz bottles can take a lot of time and effort. The very first thing you'll appreciate when switching to kegging is that there's only one vessel you need to worry about. But it's still no comparison to the pleasure of pouring a glass of beer straight from the tap! From tank to tap, this kegging kit is made from the highest-quality components, starting with a brand new KOMOS 5 lb CO2 tank and KOMOS Dual Gauge Regulator. Choose from 1.5, 2.5, or 5 gallon Slimline Torpedo Keg. These are the hottest homebrew kegs on the market, featuring stackable base, rolled stainless handles, and labeled In and Out body connects for your QDs. Everything it connected with EVABarrier draft tubing and Duotight push-to-connect fittings. EVABarrier is our draft line of choice due to the double-walled design that protects your beer from oxygen ingress and CO2 loss. Duotight fittings make everything come together quickly and easily—and they're just as easy to disconnect if you need to clean or reconfigure your setup. Included: KOMOS Dual Gauge Regulator KOMOS 5 lb aluminum CO2 cylinder Slimline Ball Lock Torpedo Keg (1.5, 2.5, or 5 gal) EVABarrier beer & gas lines Duotight Ball Lock Quick Disconnects (QDs) Duotight-compatible plastic picnic faucet KOMOS 7-in-1 Multi Tool Wrench Please note: the CO2 tank ships empty. It can be filled or swapped for a full tank at your local welding or homebrew supply store.

Read more less

Round EPDM O-rings for Cornelius keg lids.

Read more less

Replacement graduation sticker for the Oxebar 5.2 Gallon / 20L PET keg (B286). It is white text displayed over a transparent backing sticker. Please follow the directions on the sticker on how to apply this to your Oxebar tank correctly. Oxebar Keg in photo is not included. KegLand Part Number: KL38010

Read more less

Extra-large keg lid O-ring for use with the Megamouth series ball lock Torpedo Kegs. This is an extra-large corny style keg lid gasket that will only fit Megamouth Torpedo Kegs. For standard corny keg lid, see here.

Read more less