Free shipping on orders over $79!

KegLand Oxebar Mono PET Kegs

KegLand Oxebar Mono PET Kegs

Welcome to our PET Keg category, where KegLand's Oxebar Mono PET Kegs revolutionize traditional kegging. These kegs come in various sizes to cater to every brewing requirement. Featuring a lightweight design, they prioritize both convenience and durability. With lower total oxygen pickup compared to corny kegs with silicone lid seals, these Oxebar Mono PET kegs ensure excellent UV protection for preserving flavors. Step into the future of kegging with KegLand's Oxebar Mono PET Kegs, offering unparalleled convenience, durability, and versatility for all your kegged beverages. Explore their range today to enhance your homebrewing experience!

9 products

  • PCO38 Hydra Tapping Head Kit - Includes Silicone Elbow, Tube, PRV, Carbonation Caps, Filter PCO38 Hydra Tapping Head Kit - Includes Silicone Elbow, Tube, PRV, Carbonation Caps, Filter

    KegLand Oxebar Mono PET Keg | Ball Lock Adapter Tapping Head

    7 reviews

    PCO38 threaded tapping head pairs perfectly with Oxebar Mono PET Kegs for a lightweight, affordable draft dispensing system Dip tube features a filter attachment to keep solids in the keg and out of your glass Includes liquid and gas ball lock posts and pull-ring PRV rated to 36 psi This handy PCO38 Tapping Head assembly is a great way to get into kegging. Using standard homebrew ball lock disconnects, this is a convenient, light weight, robust and inexpensive solution to kegging beer, cocktails, kombucha, wine, and other beverages. This PCO38 tapping head assembly has been designed to suit standard PCO38 bottle necks such as the 4L or 8L Oxebar Mono PET Keg. KegLand utilizes quality engineering plastics and efficient injection stretch blow mould processes to manufacture economical kegs and tapping heads for both homebrewing and commercial beers. The plastics used in the tapping head can withstand a wide range of chemicals used in the brewing industry and relatively high temperatures (212°F / 100°C). The Ball Lock Tapping Head kit comes with 2.5 BAR (36 psi) PRV, liquid and gas ball lock posts, and dip tube with filter attachment. KegLand Part Number: KL27144   NOTE: The Oxebar Mono Keg shown in the example photos is sold separately.

    $21.99

  • Oxebar Mono PET Keg - PCO38 with Cap - 8L / 2.1G Oxebar Mono PET Keg - PCO38 with Cap - 8L / 2.1G

    KegLand Oxebar Mono PET Keg | Plastic Reusable Bottle | Cary Handle & Reusable Screw Cap Included | 2.1 Gallons | 8L

    10 reviews

    Oxebar Mono is a lightweight 2-gallon keg with high oxygen barrier properties compared to standard PET plastic Add the Ball Lock Adapter Tapping Head to easily pressurize and dispense at home or on the go Lighter than traditional glass growlers. Easier and safer to transport Made from Nylon impregnated PET for superior oxygen barrier Wedge seals on the optional Tapping Head and Ball Lock Caps eliminate points of oxygen ingress found where rubber is traditionally used Lower total oxygen pickup compared to a standard corny keg lid seal This 2-gallon keg is lightweight, compact and has high oxygen barrier properties with 3x better (meaning less) gas transmission than traditional PET grades of plastic making it suitable for beer storage or other oxygen sensitive carbonated and non-carbonated beverages. This product is sold with the PCO38 cap, however if you would like to dispense this product through a draft system, we recommend the use of the Ball Lock Adapter Tapping Head. The tapping head is sold separately and allows you to attach standard ball lock disconnects and pressure relief valve to the top of the keg. What is Oxebar Mono Oxebar Mono is a PET polymer blend that utilizes several polymers blended together to significantly improve gas barrier properties. When compared with standard PET plastic, Oxebar Mono is able to reduce oxygen ingress and CO2 loss so your precious beverage is preserved and shelf life extended by 3x. We recommend this product for beer storage of up to 6 months. Dimensions: Diameter: 6.1" (155 mm) Height: 20.5" (520 mm) Pressure Rating: 58 psi (4 BAR) Temperature Rating: 113°F (45°C) KegLand Part Number: KL22347   NOTE: Oxebar kegs are marked with a manufacturer’s “expiry date”. This does not indicate that the keg is bad after this date; it simply indicates that a hydro test may be in order. 2 years after production and every 2 years after first use, it is recommended that the keg be hydro tested to ensure the tank is holding pressure. Hydro test instructions are available here. You will also need the KG520 Tapping Head and D1072 Green PRV to perform the test. If you do not plan to pressurize the keg, the test is not necessary.

    $15.49

  • Oxebar 20L Amber PET Keg - w/ Silicone Dip Tube & Filter, PRV, Carbonation Caps) Oxebar 20L Amber PET Keg - w/ Silicone Dip Tube & Filter, PRV, Carbonation Caps)

    KegLand Oxebar Mono PET Keg | Ball Lock Keg | Floating Dip Tube | 5.2 Gallons | 20L

    3 reviews

    Getting into kegging has never been more affordable! Grab this 5-gallon ball lock keg for less than half the cost of a stainless corny keg of the same size! Transparent Oxebar Mono plastic makes it easy to see how much beer you have left in the keg. Especially handy when dispensing on the go Floating dip tube comes standard—a huge upgrade over traditional ball lock kegs. Draw the clearest beer inside the keg while leaving sediment behind Oxebar Mono Kegs are made from Nylon impregnated PET and Polyketone (POK) fittings for superior oxygen barrier properties compared to standard PET plastic Wedge seals on the Tapping Head and Ball Lock Caps eliminate points of oxygen ingress found where rubber is traditionally used Lower total oxygen pickup compared to a standard corny keg with silicone lid seal This 5-gallon keg is lightweight, compact and has high oxygen barrier properties with 3x better (meaning less) gas transmission than traditional PET grades of plastic making it suitable for beer storage or other oxygen sensitive carbonated and non-carbonated beverages. The included Ball Lock Tapping Head comes complete with Red & Yellow Ball Lock Caps for gas and beverage, floating dip tube with filter screen, and pull-ring PRV. Molded handles make it easy to remove the tapping head for cleaning and also allow you to stack the kegs on top of each other, even with your ball lock quick disconnects in place. Being made from the Mono Barrier PET Polymer Matrix, rather than stainless steel, this keg is lightweight and an ideal choice for draft dispensing on the go. But with all the key features of a standard corny homebrew keg, plus the added feature of the floating dip tube, the Oxebar Mono Keg makes for an affordable keg option for home dispensing as well. Fit up to 3 of these bad boys in a KOMOS Standard or Deluxe Kegerator, or fit up to 6 in the KOMOS Double-Wide Kegerator. Includes: 20L Amber Mono Barrier PET Oxebar Keg Dual PCO1881 Lid Assembly with Oxebar Black Handles Green Pull Ring PRV (65 PSI) Silicone Floating Dip Tube w/ Filter Attachment Red & Yellow Ball Lock Quick Disconnect (QD) Caps Specs: Height: 25.1" Diameter: 9.2" Volume: 5.28 Gallons Fit up to 3 kegs in the KOMOS Standard & Deluxe Kegerators NOTE: Oxebar Mono kegs are marked with a manufacture date. 2 years after production, and every 2 years after first use, it is recommended that the keg be hydro tested to ensure the keg is holding pressure. Hydro test instructions are below. You will also need a 100 PSI Gray PRV to perform the test. Fill the keg to the brim with room temperature water Replace the Green PRV with a Gray PRV rated to 6 BAR or higher Pressurize the tank to 6 BAR (87 psi) Hold the keg at 6 BAR for 1 minute Release the pressure and immediately remove the Gray PRV and swap back to the Green PRV If leaks or potential points of failure are found, replace the tank KegLand Part Number: KL36054   NOTE: Oxebar kegs are marked with a manufacturer’s “expiry date”. This does not indicate that the keg is bad after this date; it simply indicates that a hydro test may be in order. 2 years after production and every 2 years after first use, it is recommended that the keg be hydro tested to ensure the tank is holding pressure. Hydro test instructions are available here. You will also need the KG520 Tapping Head and D1072 Green PRV to perform the test. If you do not plan to pressurize the keg, the test is not necessary.

    $49.99

  • Oxebar Mono PET Keg - PCO38 with Cap - 4L / 1G Oxebar Mono PET Keg - PCO38 with Cap - 4L / 1G

    KegLand Oxebar Mono PET Keg | Plastic Reusable Bottle | Cary Handle & Reusable Screw Cap Included | 1 Gallon | 4L

    3 reviews

    Oxebar Mono is a lightweight 1-gallon keg with high oxygen barrier properties compared to standard PET plastic Add the Ball Lock Adapter Tapping Head to easily pressurize and dispense at home or on the go Lighter than traditional glass growlers. Easier and safer to transport Made from Nylon impregnated PET for superior oxygen barrier Wedge seals on the optional Tapping Head and Ball Lock Caps eliminate points of oxygen ingress found where rubber is traditionally used Lower total oxygen pickup compared to a standard corny keg lid seal This 1-gallon keg is lightweight, compact and has high oxygen barrier properties with 3x better (meaning less) gas transmission than traditional PET grades of plastic making it suitable for beer storage or other oxygen sensitive carbonated and non-carbonated beverages. This product is sold with the PCO38 cap, however if you would like to dispense this product through a draft system, we recommend the use of the Ball Lock Adapter Tapping Head. The tapping head is sold separately and allows you to attach standard ball lock disconnects and pressure relief valve to the top of the keg. What is Oxebar Mono Oxebar Mono is a PET polymer blend that utilizes several polymers blended together to significantly improve gas barrier properties. When compared with standard PET plastic, Oxebar Mono is able to reduce oxygen ingress and CO2 loss so your precious beverage is preserved and shelf life extended by 3x. We recommend this product for beer storage of up to 6 months. Dimensions: Diameter: 6.1" (155 mm) Height: 12.7" (325 mm) Pressure Rating: 58 psi (4 BAR) Temperature Rating: 113°F (45°C) KegLand Part Number: KL24877   NOTE: Oxebar kegs are marked with a manufacturer’s “expiry date”. This does not indicate that the keg is bad after this date; it simply indicates that a hydro test may be in order. 2 years after production and every 2 years after first use, it is recommended that the keg be hydro tested to ensure the tank is holding pressure. Hydro test instructions are available here. You will also need the KG520 Tapping Head and D1072 Green PRV to perform the test. If you do not plan to pressurize the keg, the test is not necessary.

    $12.49

  • PCO38 Hydra Tapping Head Only PCO38 Hydra Tapping Head Only

    Replacement PCO38 Tapping Head

    Replacement PCO38 tapping head. This is the tapping head only. For the full tapping head assembly see KG520. Comes with PCO38 female threads for attaching to the Oxebar Mono Keg and three PCCO1881 male threaded ports for attaching ball lock caps and PRV. KegLand Part Number: KL20169

    $7.69

  • Oxebar 20L Amber PET Keg - Low2 Seal Kit (5 pcs) Oxebar 20L Amber PET Keg - Low2 Seal Kit (5 pcs)

    Low2 Seals for 20L KegLand Oxebar Mono PET Keg | Pack of 5

    Give your beverage the absolute best protection from oxygen staling with KegLand's Low2 O-rings! Made from a special blend of materials, these gaskets offer vastly improved oxygen barrier properties compared to Silicone or EPDM The result is your beverage staying fresher for longer! Compatible with KegLand's 20L Oxebar Mono PET Keg These seals replace the red O-ring seal inside the 20L Oxebar keg lids. What is Low2? Low2 O-rings are the new golden yellow standard of homebrew kegs brought to you by KegLand. Why? Because of their unique composition (Synthetic M-Class and Cross-Linked Elastomers), they have superior oxygen barrier properties than that of the previous silicone O-rings. This results in your beverage staying fresher for longer. The same Low2 O-ring material was independently tested on 5-gallon stainless steel kegs by GunnLab, an Australia-based plastic packaging testing laboratory. See below for a printout of the test results. KegLand Part Number: KL38003

    $10.99

  • Oxebar 20L Amber PET Keg - Graduation Sticker

    KegLand Oxebar Mono PET Keg | Replacement Graduation Sticker

    Replacement graduation sticker for the Oxebar 5.2 Gallon / 20L PET keg (B286). It is white text displayed over a transparent backing sticker. Please follow the directions on the sticker on how to apply this to your Oxebar tank correctly. Oxebar Keg in photo is not included. KegLand Part Number: KL38010

    $4.39

  • Oxebar Mono PET Keg Neoprene Jacket / Parka - 4L Oxebar Mono PET Keg Neoprene Jacket / Parka - 4L

    Neoprene Insulating Keg Parka for Oxebar Mono PET Keg | 4L

    Keep your beer colder for longer with the insulating neoprene material Prevent dings and scratches during transport with an internal bump cap Easily carry your keg using the removable shoulder strap The zippered design makes it simple to put on and take off Tailormade for the 4L Oxebar Mono PET Keg Keep your beverage colder for longer with the Oxebar Neoprene Jacket. This parka is more than just a cozy sleeve for your keg; it's designed with a rigid internal "bump cap" to prevent those annoying scratches and scuffs that can happen when your keg is being moved around. Made from durable neoprene, this jacket helps maintain the temperature of your beverage, whether you're taking it to a party or just keeping it chilled in the fridge. The Oxebar Neoprene Jacket protects your keg while helping your beer stay crisp and cold. KegLand Part Number: KL42888

    $24.99

  • Oxebar Mono PET Keg Neoprene Jacket / Parka - 8L Oxebar Mono PET Keg Neoprene Jacket / Parka - 8L

    Neoprene Insulating Keg Parka for Oxebar Mono PET Keg | 8L

    Keep your beer colder for longer with the insulating neoprene material Prevent dings and scratches during transport with an internal bump cap Easily carry your keg using the removable shoulder strap The zippered design makes it simple to put on and take off Tailormade for the 8L Oxebar Mono PET Keg Keep your beverage colder for longer with the Oxebar Neoprene Jacket. This parka is more than just a cozy sleeve for your keg; it's designed with a rigid internal "bump cap" to prevent those annoying scratches and scuffs that can happen when your keg is being moved around. Made from durable neoprene, this jacket helps maintain the temperature of your beverage, whether you're taking it to a party or just keeping it chilled in the fridge. The Oxebar Neoprene Jacket protects your keg while helping your beer stay crisp and cold. KegLand Part Number: KL42895

    $32.99

Login

Forgot your password?

Don't have an account yet?
Create account