New Products Check out what's hot & new
BECOME A VIP Join the VIP text list
Detecting your location...
Beer Brewing Equipment & Supplies

KegLand Warming Wizard Wand | Immersion Heater | 125 Watt | 2" T.C.

    Description

    • Low watt density heating element gently warms your fermenting beer without scorching
    • Keep your fermentation temperature consistent during the colder months or raise the temp on command for diacetyl rests
    • Connect directly to the BrewBuilt X3 Uni Conical via the dedicated 2" tri-clamp port for effective, in-solution heating
    • Smooth, stainless steel construction is easy to clean after use
    • Compatible with all sizes of X3 Uni Conicals

    Add this Immersion Heater to your BrewBuilt X3 Uni Conical for the ultimate control over your fermentation temperature. Connecting directly to the X3's dedicated 2" T.C. port at the side of the cone, the Immersion Heater will provide gentle, effective heating whenever you need it. A must-have for brewers living in colder climates or if you want the peace of mind that your temperature will never drop too low for your ale or kveik strains regardless of the time of year. Heating your fermenter on command can also come in handy if you need to bring your chilled wort up to temp before pitching, or if you need to perform a diacetyl rest after fermentation is complete.

    We recommend pairing the Immersion Heater with a temperature controller like the Inkbird so it will only be powered on as needed. If using the heater alongside the IceMaster Max 2 glycol chiller, you can insert the Max 2 temp probe into the X3's thermowell first and then insert the Inkbird's probe behind it. Both probes will be deep enough to get accurate temp readings and heating & cooling will be regulated by independent controllers.

    Another setup option is using the IceMaster 100 and the BrewBuilt Chiller Pump Kit. The IceMaster 100 does not come with built-in pumps so you can add your own submersible pumps as needed. Each Chiller Pump Kit includes an Inkbird controller and a submersible pump. The heater and pump are then both plugged into the Inkbird so heating & cooling are regulated by a single controller.

    The element runs at 125 watts when powered with the included IEC x 110V plug adapter (not pictured).

    Specs:

    • 125W @ 110-120V (500W @ 220-240V)
    • Total Length: 16"
    • Length in Conical: 12"
    • Cord Length: 5 ft.

    KegLand Part Number: KL35941

    Please Note: The Warmking Wizard Wand is only compatible with X3 BrewBuilt Conicals. If interested in heating a previous generation conical, see the BrewBuilt Conical Heaters here.

    KegLand Warming Wizard Wand | Immersion Heater | 125 Watt | 2" T.C.

      Product form

      SKU: CONP510

      $109.99

      Calculating shipping time...
      Shipping
      Free Shipping*
      Shipping
      Paid Shipping
      Drop Ship
      Drop Ship
      Discount Exclusion
      Discount Exclusion
      Freight
      Freight Only
      Pre-book
      Pre Order

        Prop 65 Warning WARNING : This product can expose you to chemicals including Lead and lead compounds, which is/are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.

        Description

        • Low watt density heating element gently warms your fermenting beer without scorching
        • Keep your fermentation temperature consistent during the colder months or raise the temp on command for diacetyl rests
        • Connect directly to the BrewBuilt X3 Uni Conical via the dedicated 2" tri-clamp port for effective, in-solution heating
        • Smooth, stainless steel construction is easy to clean after use
        • Compatible with all sizes of X3 Uni Conicals

        Add this Immersion Heater to your BrewBuilt X3 Uni Conical for the ultimate control over your fermentation temperature. Connecting directly to the X3's dedicated 2" T.C. port at the side of the cone, the Immersion Heater will provide gentle, effective heating whenever you need it. A must-have for brewers living in colder climates or if you want the peace of mind that your temperature will never drop too low for your ale or kveik strains regardless of the time of year. Heating your fermenter on command can also come in handy if you need to bring your chilled wort up to temp before pitching, or if you need to perform a diacetyl rest after fermentation is complete.

        We recommend pairing the Immersion Heater with a temperature controller like the Inkbird so it will only be powered on as needed. If using the heater alongside the IceMaster Max 2 glycol chiller, you can insert the Max 2 temp probe into the X3's thermowell first and then insert the Inkbird's probe behind it. Both probes will be deep enough to get accurate temp readings and heating & cooling will be regulated by independent controllers.

        Another setup option is using the IceMaster 100 and the BrewBuilt Chiller Pump Kit. The IceMaster 100 does not come with built-in pumps so you can add your own submersible pumps as needed. Each Chiller Pump Kit includes an Inkbird controller and a submersible pump. The heater and pump are then both plugged into the Inkbird so heating & cooling are regulated by a single controller.

        The element runs at 125 watts when powered with the included IEC x 110V plug adapter (not pictured).

        Specs:

        • 125W @ 110-120V (500W @ 220-240V)
        • Total Length: 16"
        • Length in Conical: 12"
        • Cord Length: 5 ft.

        KegLand Part Number: KL35941

        Please Note: The Warmking Wizard Wand is only compatible with X3 BrewBuilt Conicals. If interested in heating a previous generation conical, see the BrewBuilt Conical Heaters here.

        Important Warnings & Shipping Info +
        Shipping Icon
        Free Shipping: Fast & Free Shipping over $79
        Shipping Icon
        Shipping Rates Apply: Bulk items like grain, bottles, and malt are excluded from our free shipping promotion due to their weight, and often dropship items. Standard shipping rates apply and are calculated at checkout based on your location and order size.
        Drop Ship Icon
        Drop Ship: This product will ship directly from the supplier. Delivery may take 1-4 weeks depending on the vendor.
        Discount Exclusion Icon
        Discount Exclusion: This item is not eligible for sitewide price reductions or percentage discounts. Learn more.
        Freight Icon
        Freight Shipping: This item ships freight only.
        Pre-book Icon
        Pre Order: This item is available for Pre-Order. Full payment is required to reserve stock.

        You Might Also Need

        Inkbird Digital Temperature Controller
        Inkbird Digital Temperature Controller
        $44.99
        BrewBuilt® IceMaster 100 | Glycol Chiller | 2600btu | 110V | 8 Gal. Tank Capacity
        BrewBuilt® IceMaster 100 | Glycol Chiller | 2600btu | 110V | 8 Gal. Tank Capacity
        $899.99
        RAPT Digital Temperature Controller | WiFi/Bluetooth Enabled | RAPT Portal Compatible
        RAPT Digital Temperature Controller | WiFi/Bluetooth Enabled | RAPT Portal Compatible
        $137.99

        Login

        Forgot your password?

        Don't have an account yet?
        Create account