Little Red Spitfire | Low Volume CIP Spinning Spray Rotor for BrewZilla | Only Requires 3 GPM Flow Rate!
Little Red Spitfire | Low Volume CIP Spinning Spray Rotor for BrewZilla | Only Requires 3 GPM Flow Rate!
SKU: AG529
$16.49 $11.54
SKU: AG529
$16.49 $11.54
Bought one, liked it. cleaning and dropped from arm height to table. broke.
Bought another one, stored in plastic sealed box inside a plastic tub, pulled out, also broken.
while I enjoy it, it seems pretty fragile . Don't think I want to buy another one at this point in time.
Mounted in the cap of my fermzilla. Just plug the bulkhead during fermentation. I use it to clean in place and aerated my wort when transferring. I transfer at pitch temp so I dunno if it can handle 140 plus temps but I use it to clean at 130 with no issues. Fermzilla isn't rated for higher or id prolly push it. Overall a great little part that works very well for the price. Oh and I use the pump in the grainfather g40 for all uses.
Not really worth the purchase. It’s quicker to just wash by hand. This thing also gets stuck easily and stops spinning.
First off, what other CIP system is available at this price? 95% of the homebrew pumps out there can't provide enough flow for a CIP ball; This one can. I found myself using this on just about everything after a brew day, from conical fermenters to a brewzilla, to carboys; the sky is the limit! Just hook it up to a pump and some tubing and move it around. I was using it so often I got tired of moving it around; so I got 3 more! Now I just turn a valve and everything is already set up and ready to go! A total game changer!
Mounted in the cap of my fermzilla. Just plug the bulkhead during fermentation. I use it to clean in place and aerated my wort when transferring. I transfer at pitch temp so I dunno if it can handle 140 plus temps, but I use it to clean at 130 with no issues. Fermzilla isn't rated for higher or id prolly push it. Overall a great little part that works very well for the price. Oh and I use the pump in the grainfather g40 for all uses.
I have a Spike 20G HERMS setup with two March pumps. Moving the BK and MLT to and from the sink to clean and also scrub is hard on the shoulders (maybe I should work out more instead of drink beer lol). I was reading about CIP balls that required larger pumps than what I had. I didn't want to spend $500 on a CIP. So, I tried this low-cost solution. I have to say, works really well. Maybe not as great as a real CIP system, but I can clean my two kettles without lugging them to sink. The one thing I did add, was a TC bulkhead to one my kettle lids and then went to Home Depot and got some fittings to make it rigid instead of using the hose. So, for like $50 bucks total, I was able to save a lot of movement and I can let it CIP for longer and get the beer stone out vs scrubbing.
How can I attach this to a Fermzilla lid? I thought about removing the PRV and utilize that hole when CIP temporarily without moving fermenter. Anyone try this yet?
Is this safe to use post-boil to aerate hot wort during a no-chill transfer?