Detecting your location...
Brewing Equipment Category
Homebrew Equipment

Brew Better Beer with Pro-Level Gear

Equip your home brewery without breaking the bank. From heavy-duty mashing kettles to precise transfer pumps, we have exactly what you need to craft the perfect pint.

  • Free Shipping on qualifying high-quality gear orders over $59.
  • Ready-to-Brew Kettles designed for immediate, highly effective brewing.
  • Fast & Efficient Cooling using our premium wort chillers to prep for yeast.
  • Effortless Liquid Transfers with our self-priming and magnetic drive pumps.
Step 1

Mash & Boil

Extract rich flavors and boil your wort using our heavy-duty standard or modified kettles and high-output burners.

Step 2

Chill & Transfer

Rapidly drop the temperature with a wort chiller, then use a magnetic drive pump to seamlessly move your beer into a fermenter.

Step 3

Ferment & Enjoy

Pitch your yeast, allow the fermentation magic to happen, and pour yourself a perfect, refreshing homemade pint.

Shop by collection
997 products

  • Low stock! (Pack of 20) Stepless Clamp - Stainless - For 7/16" OD Tubing

    Stepless Hose Clamp - 7/16 in. OD Tubing (20 Pack)

    8 reviews

    Stepless clamps are the best choice for your home draft set up. Standard worm drive hose clamps are nice for reusability, but they aren't ideal for beer and gas lines because they tend to pinch on one side, leading to leaks or degraded pressure holding capacity of your draft system. Stepless clamps apply even compression around the whole diameter of the tubing line, tightening in a perfect circle. They can be tightened with the middle cutter on a pair of pliers, or better yet, with the Stepless Clamp Tool (H1006). For tubing with 7/16" outer diameter (10.5-12.5 mm OD) Stainless steel Pack of 20 Kegland Part Number: KL0669

    $10.99

  • CellarScience - Propylene Glycol - 1 gal CellarScience - Propylene Glycol - 1 gal

    Food Grade Propylene Glycol 100% | One Gallon | CellarScience®

    3 reviews

    Certified Food-Grade Propylene Glycol Inhibited Coolant 100% Concentrate for use in Glycol Cooling Systems in any Food Service application. Dilute with distilled water to the ratio specified in the instructions for your chiller. NSF Certified, food-grade inhibited propylene glycol fluid which is intended for use in antifreeze and heat transfer applications where contact with food may occur, such as wineries, micro-breweries, meatpackers, and other food-related industries.  Formulated with propylene glycol and an inhibitor system which is effective at preventing rust and corrosion in aluminum, brass, cast iron, copper, solder and steel-containing systems.  Operating Range: -50°F to 325°F (-46°C to 163°C) Application: HVAC system freeze/burst/corrosion protection Immersion freezing Cooling liquid foods Packaging carbonated beverages Fermentation cooling Refrigeration coil defrosting Cold room dehumidifying Conveyor roller defrosting Process cooling Process heating Waste heat recovery PLEASE NOTE: While Propylene Glycol is considered food grade this is not meant to suggest that it is safe for consumption. Always test your heat exchangers with water to check for pinhole leaks. In case of consumption please contact your local Poison Control Center immediately.  

    $54.99

  • Carboy Hood w/ White Caps- (3, 5, 6, 6.5 Gallon smooth neck) Carboy Hood w/ White Caps- (3, 5, 6, 6.5 Gallon smooth neck)

    Carboy Blow Off Hood (Smooth Neck Carboy Cap)

    49 reviews

    So much easier than a bung!   Rubber Carboy Blow Off Hood with two attachments for vinyl blow off hoses (3/8" or 1/2"). Fits our 3, 5, 6, or 6.5 gallon glass carboys with smooth necks. Can also be used on 5 and 6 gallon plastic carboys.   TIP: Carboy hoods are exceptionally useful for blowoff tubes. Just add 3' of 1/2" racking tubing into a bucket of water as your airlock.

    $4.79

  • MaltMuncher 3 Roller Grain Mill MaltMuncher 3 Roller Grain Mill

    MaltMuncher 3 Roller Grain Mill | Cold Rolled Steel Rollers | Adjustable Gap Setting | 12 lb Hopper Capacity

    56 reviews

    Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory.   Mill your own grains on brew day for increased freshness and higher efficiency! Adjustable gap setting allows you to fine tune your preferred crush level and adapt to the kernel size of different malts 12 TPI knurl to efficiently pull grain through rollers while leaving hull intact to form an excellent filter bed for sparging 3 roller mills are more effective at cracking the husk of the grain and offer better crushing performance in a single pass Included crank handle can be detached to power the driven roller with an electric drill or motor Mill your own grains for ultimate freshness with the MaltMuncher three roller grain mill. Includes a 12 lb hopper, adjustable rollers, and hand crank. The handle can be removed to use the mill with a drill. The MaltMuncher is backed by a one year warranty and is built to last with rollers made from cold rolled steel. The body and hopper is made from 6061 grade aluminum. The optional PPE base board is much stronger than comparable particle board or plywood bases and makes for a secure platform to set on a bucket. Do you love to make your own equipment? Make an amazing motorized mill with the optional MaltMuncher high torque motor designed to work with the Maltmuncher 3 roller grain mills. Features: Comes with 12 lb hopper and crank handle Great for use with a power drill Cold rolled steel rollers sized at 5" long by 1.25" diameter Adjustable rollers at both ends to move the gap from 0" - 0.063" If motorized we recommend 200 rpm 12 TPI knurl to effectively pull grain through the rollers while still leaving the hulls intact to later form an excellent filter during the sparge 12 mm crank shaft Kegland Part Number: KL03261 Please note: This mill is designed for use with brewing grains only. It will not work for cracking whole kernel corn.

    $208.99

  • Stepless Clamp Tool Stepless Clamp Tool

    Stepless Clamp Tool

    8 reviews

    This purpose built clamp tool is the easiest way to fasten our stainless steel stepless clamps.

    $10.99

  • Brewmaster Precision Digital Scale 500 g x .01 Brewmaster Precision Digital Scale 500 g x .01

    Brewmaster Precision Digital Brewing Scale | Hops, Brewing Salts & Additives | 500g | .01g

    4 reviews

    For the highest level of accuracy, you need the Brewmaster Precision Digital Scale. Most scales only measure down to 1/10th of a gram or 0.1 while this unit measures to the 1/100th of a gram or 0.01. This is the ideal scale for measuring brewing salts when you want your water profile to be as on point as possible. Also works well for hops, additives, or other measurements under 1 lb. If you're not concerned about having this level or precision, or want a scale that also works well with measuring specialty grains, check out the Brewmaster Mini Digital Scale. Features: 500 g (1.1 lb) Capacity 0.01 g Resolution Auto Calibration Tare Function Back Light Display 30 Seconds Auto Shutdown Units: g/oz/ozt/dwt/gn/ct Batteries included Note: This scale dose not come with calibration wieghts.

    $17.99

  • Two Hole #10 Brewmaster Silicone Stopper Two Hole #10 Brewmaster Silicone Stopper

    Two Hole #10 Brewmaster Silicone Stopper

    13 reviews

    This stopper has two holes and we use it in the production of our #10 stopper thermowell. It features one 3/8" hole and one 1/4" hole. A racking tube or stainless tube can be inserted into the 1/4" hole with the aid of some lubrifilm, forming an airtight seal, and the 3/8" hole fits an airlock. Even after you wedge all these fittings into it, it still fits a plastic carboy neck! Use this in any configuration you can think of, it'll fit: Airlocks, Thermowells, Racking Canes, and anything else you can imagine!

    $5.99

  • Tilt Hydrometer and Thermometer - Blue Tilt Hydrometer and Thermometer - Blue

    Tilt™ Hydrometer and Thermometer - Blue

    23 reviews

    Track your fermentation progress without ever disturbing your wort! The Tilt Hydrometer and Thermometer is added directly to your fermenter to provide real-time data on the current gravity and temperature of your wort, eliminating the hassle and potential contamination that comes from opening your fermenter to pull samples. The Tilt is especially useful for brewers fermenting in glass carboys or plastic fermenters that don't have spigots for sample taking. Designed for homebrewing, the Tilt hydrometer lets you instantly read your brew's specific gravity and temperature on your compatible Apple iPhone/iPad or Android smartphone/tablet or Tilt Pi. Most Bluetooth 4.0+ devices will work with the Tilt. You can then optionally log data to the cloud using their free Google Sheets template or other 3rd party cloud platforms. Tilt's goal is to help homebrewers brew better beer. The Tilt hydrometer allows you to check the specific gravity and temperature of your beer while it's fermenting, without ever having to open your fermenter or pour out any of your precious brew. This makes brewing more consistent and easier to track. Here are some of the new features of the Tilt: Range: Better reception and range. With the increased transmission power your Tilt will send data through larger, thicker-walled fermenters. Precision: Upgraded sensors. With an improved temperature sensor and accelerometer your Tilt will operate with more precision. Efficiency: Reduced power consumption so more brews, less battery changing. New Look: Newly designed custom circuit board and harness. If using multiple Tilt hydrometers for different batches of fermenting beer you must use a different color for each batch. The app will not read multiple hydrometers of the same color. Each Tilt comes calibrated and ready to go with a pre-installed battery that lasts 12-24 months depending on usage. Just download the free app, sanitize your Tilt, drop it in your fermenter, and start taking readings with your phone, tablet, or Tilt Pi. The specific gravity is accurate +/- 0.002 within the Tilt's range of 0.990 to 1.120. The thermometer is accurate +/- 1°F (+/- 0.5°C). Download the free Tilt app at the Apple App Store or Google Play Store or get the free Tilt Pi download.

    $135.00

  • Stainless - 1/2 in FPT x 1/2 in Barb

    Stainless Barb - 1/2 in. x 1/2 in. FPT

    21 reviews

    Use this fitting for connecting tubing directly to your pump. 1/2" FPT on one side, with a 1/2" barb on the other. If you are not using a QD Set or a ball valve, this is a handy piece of stainless for a direct connection!

    $6.59

  • FermZilla All Rounder Stand Harness - 30L/60L FermZilla All Rounder Stand Harness - 30L/60L

    FermZilla All Rounder Stand Harness

    15 reviews

    This handy little strap will make cleaning and transporting your FermZilla All Rounder 30L or 60L an absolute breeze. Instead of picking up the tank with one hand and the stand with the other every time you need to move it, this harness will strap the tank and stand together so they can be moved together as one piece. Simply attach through both sections of the base in the orientation you wish. Slide up and out of the little buckle pieces making sure that the buckle is facing towards you, then strap in and strap down! Please note that the harness does not include handles. The harness is meant to be used alongside the All Rounder's included stainless handle. The Strap is long enough for the 60L and 30L All Rounder. We recommend rolling up the excess strap and paper clipping or cutting to suit the 30L. Stainless handles not included with the carrier harness. Kegland Part number: KL13567  

    $10.99

  • pH Storage Solution (Milwaukee# MA9015)

    Milwaukee Storage Solution for pH/ORP Electrodes

    21 reviews

    For long term health of your elctrode use pH storage solution. It is a mixture of Potassium Chloride, Postassium Hydrogen Phthalate, Silver Nitrate, and Sodium Hydroxide. Volume: 230 ml Download the PDF

    $16.70

  • RAPT Bluetooth Thermometer RAPT Bluetooth Thermometer

    RAPT Bluetooth Thermometer | BrewZilla Gen 4 | RAPT Portal Compatible | Backlit Digital Display

    2 reviews

    Make your Gen 4 BrewZilla even smarter by pairing it with the RAPT Bluetooth Thermometer Take mash temp readings from the top and bottom of your grain bed simultaneously Set a temperature diffential between the readings to enable the BrewZilla RAPT controller to more accurately maintain temps and perform mash steps Monitor coolant water temps during distillation runs and set alarms to alert you if the temperature is too high Automatically log brew days with detailed information to your RAPT Portal account Huge temperature range from -4°F to 572°F is easy to read on the backlit digital display Orange backing plate can clip to the rim of your BrewZilla and is also magnetic AAA batteries included This low energy, RAPT-enabled Bluetooth Thermometer is compatible with the Gen 4 BrewZilla, RAPT Temperature Controller, and RAPT Fermentation Chamber. It will not work without one or more of these devices. By receiving multiple BLE (Bluetooth Low Energy) thermometer sensors, the BrewZilla can make smarter and more automated decisions on how to control the brewing or distillation process. For example, the BLE thermometer probe can be put into the middle of the malt pipe so the BrewZilla can more accurately control elements switching on/off to achieve a core malt pipe temperature, or the thermometer can be placed into your coolant water during distillation runs so you get an alarm if the temperature is too high. RAPT Connectivity The new Bluetooth thermometer can connect up to your BrewZilla Gen 4, RAPT Temperature Controller, or RAPT Fermentation Chamber and log that temperature data and manipulate fermentation/brewing and distillation profiles in the RAPT Portal. This greatly reduces the need for handwritten records of your brew day as it's all done automatically. The RAPT portal also allows you to see every brew you have done in the past with logged temperatures from the main unit's probe and this digital thermometer. This unit can also be set up to send push notifications to your mobile phone of when it's time to begin sparging or begin other steps in your brewing process. Along with this ease of access and control, the RAPT BrewZilla will also allow you to fully customize your brew day with profiles specifically tuned to your style of brewing or your recipe. For example, you could set up step mash profiles using the core temperature of your mash instead of the cavity below where the BrewZilla's main temp probe is located. Greater accuracy for a more repeatable recipe that results in much better beer! Specifications: Temp Range: -4°F – 572°F (-20°C – 300°C) Probe Length: 8" (20 cm) Note that the probe tip is very sharp Remove black plastic tip before use Plastic tip should be used for storage to avoid punctures / injury Cable Length: 39" (100 cm) Magnetized Backing Plate (Orange) 2 x AAA Batteries (included) KegLand Part Number: KL24334 RAPT Bluetooth Thermometer | User Guide

    $49.99

  • KegLand Sergeant Sparge Head - Wort Spreader and Aerator KegLand Sergeant Sparge Head - Wort Spreader and Aerator

    KegLand Sergeant Sparge Head | Wort Speader & Aerator

    2 reviews

    Spread recirculating wort evenly during mashing Transfer sparge water into your mash tun without disturbing the grain bed Aerate wort transferring from kettle to fermenter Designed to fit through the hole of the BrewZilla glass lid The KegLand Sergeant Sparge Head is a super simple device designed to help spread and distribute your wort in a mash tun. It can also be used as the final transfer piece between kettle and fermenter to assist in aerating your wort prior to pitching your yeast. It is also designed to fit through the BrewZilla's glass lid or distillation lid so you can recirculate evenly over your mash by adjusting the pumps flow rate. Specifications: 1/2" Thread 2" Long x 3/4" Wide Stainless Steel Barb w/ 1/2" Stainless Steel Retaining Nut KegLand Part Number: KL33640

    $10.99

  • (Pack of 20) Stepless Clamp - Stainless - For 5/16" - 3/8" OD Tubing

    Stepless Hose Clamp - 5/16 in. - 3/8 in. OD Tubing (20 Pack)

    2 reviews

    Stepless clamps are the best choice for your home draft set up. Standard worm drive hose clamps are nice for reusability, but they aren't ideal for beer and gas lines because they tend to pinch on one side, leading to leaks or degraded pressure holding capacity of your draft system. Stepless clamps apply even compression around the whole diameter of the tubing line, tightening in a perfect circle. They can be tightened with the middle cutter on a pair of pliers, or better yet, with the Stepless Clamp Tool (H1006). For tubing with 5/16" to 3/8" outer diameter (7-10 mm OD) Stainless steel Pack of 20 Kegland Part Number: KL06682

    $10.99

  • Refractometer - Dual Scale w/ ATC Refractometer - Dual Scale w/ ATC

    Brewing Refractometer - Dual Scale

    130 reviews

    A refractometer is used to measure the density of a solution, in our case how much malt sugar is in solution. Featuring both a Brix scale AND a Specific Gravity Scale Our refractometer is unique in that it features both a Brix Scale and a Specific Gravity Scale, the scale most homebrewers use. Why use a Refractometer you ask? Are you tired of not hitting your desired target gravities? Have you tried to cool a large sample so you could use a hydrometer and see what your gravity is? A refractometer allows you take instant gravity readings, with just one drop, at any point during the boil, or even during the run off of the sparge during an all-grain brew. These 'during the process' readings allow you to add more water or boil longer so you can attain exactly the gravity you desire. Refractometer Statistics Our refractometer is hand held with a metal body, flexible eye piece and rubber grip. It features a 0 to 32% Brix scale and from 1.000 to 1.120 on the Specific Gravity Scale with .2% resolution and ATC (Automatic Temperature Compensation). Traditional refractometers without ATC are calibrated to work at 68 degrees Fahrenheit. The ATC function allows you to use the refractometer in an ambient temperature range of 50-86 degrees Fahrenheit (10-30 Celsius.) Because your sample is just one drop, and will quickly adjust to the temperature of the refractometer, the temperature of the sample is irrelevant. Our unit also comes with a manual calibration knob that is secured with a lock nut. To calibrate place one drop of distilled water on the testing platform and adjust to zero if necessary. Getting Geeky about why the Specific Gravity Scale on our unit is accurate Some dual scale refractometers feature a linear scale that multiplies brix by 4 to get Specific Gravity. This is okay at lower gravities up to around 1.040 but the higher your starting gravity goes, the less accurate the conversion is. For example, take a Brix reading of 10, multiply by 4, and you get a SG reading of 1.040 - the accurate SG reading is 1.041. Take a Brix reading of 20, multiply by 4, and you get 1.080 - the accurate conversion is 1.084. We worked with our Refractometer manufacturer to create a unit with a non linear conversion and thus this model can be accurately used for Specific Gravity readings. NOTE - Refractometers will not read correctly if alcohol is present. We have a spreadsheet that can be used to help determine your actual gravity or brix, and this can be found in the "Documents" tab above.

    $65.99

  • Stainless Ball Valve - 1/2 in Full Port Stainless Ball Valve - 1/2 in Full Port

    Stainless Ball Valve - 1/2 in. Full Port

    57 reviews

    304 Stainless steel, full port, two piece ball valves that will last for years. Easy to clean with 1/2" FPT on input and output.. High grade 304-stainless made to last with1000psi rating. We've been selling these same valves from the same manufacturer for over 10 years. This is non-locking valve meaning that it does not come with the locking clip. Many users prefer this because you are not constantly lifting the clip to open and close the valve. If you would prefer a ball valve with a locking clip please see the Brewbuilt Ball Valve.  TIP: You can take a ball valve apart using two crescent wrenches. This will allow you to open up the valve to get to the ball and the two PTFE gaskets that form the seal when closed.

    $17.99

  • Beer & Wine Filtering Kit (10 in ) Beer & Wine Filtering Kit (10 in )

    Beer Filter Kit - 10 in. Canister Filter

    45 reviews

    The beer filter gets installed inline between two ball lock Cornelius kegs using CO2 pressure to push the beer out of the full keg through the filter and into the clean keg. This kit is designed to filter out particles down to 1 micron, which is considered fine filtration. At one micron the beer will be clear after filtration provided you do not have a starch haze. Filtering also accelerates the conditioning process to just a few days. Most of our customers who use the filtering kit find that they; keg beer, chill it overnight, filter the next day, carbonate, and are drinking clear beer in a couple days. For those who want to bottle beer without sediment, filtering combined with the use of a counter pressure bottle filler will allow you to put crystal clear, carbonated beer into bottle. The beer filtering kit comes with one 10" filter housing, a 1 micron 10" spun poly sediment filter, fittings for connection to the filter housing, 3' of beverage line, clamps, and two beverage out ball lock quick disconnects. Spun-polypropylene filters are disposable filters and cannot be cleaned and used more than once. However, you can filter multiple kegs with one filter. 3 micron will remove most yeast, and 1 micron filtration will remove almost all yeast. All filters are rated nominal (will filter out 80-85% of matter at given rating). Temperature rated to 125°F.

    $74.99

  • 15" Thermowell (No Stopper) 15" Thermowell (No Stopper)

    Thermowell - 15 in.

    10 reviews

    This stainless steel thermowell is the same one used with many of the hood and stopper thermowells we sell, such as the FE625 and FE624B. It is also a direct replacement for the thermowell used with the BrewBuilt CoolStix™ for Carboy fermenters. Specifications: 15" long 1/4" inner diameter 5/16" outer diameter Made from 304 stainless steel Will not work with Johnson Temperature Controllers (FE60 or FE61) because the probes are too large.

    $21.99

  • MaltMuncher 2 Roller Grain Mill MaltMuncher 2 Roller Grain Mill

    MaltMuncher 2 Roller Grain Mill | Cold Rolled Steel Rollers | Adjustable Gap Setting | 6 lb Hopper Capacity

    31 reviews

    Mill your own grains on brew day for increased freshness and higher efficiency! Adjustable gap setting allows you to fine tune your preferred crush level and adapt to the kernel size of different malts 12 TPI knurl to efficiently pull grain through rollers while leaving hull intact to form an excellent filter bed for sparging 2 roller mills are great "first mills" for homebrewers expanding their brew kit. Economical and gets the job done! Included crank handle can be detached to power the driven roller with an electric drill or motor Mill your own grains for ultimate freshness with the MaltMuncher two roller grain mill. Includes a 6lb hopper, adjustable rollers, and hand crank. The handle can be removed to use the mill with a drill. The MaltMuncher is backed by a one year warranty and is built to last with rollers made from cold rolled steel, a big upgrade over most entry level mills. The body and hopper is made from 6061 grade aluminum. The optional PPE base board is much stronger than comparable particle board or plywood bases and makes for a secure platform to set on a bucket. Do you love to build your own equipment? Make an amazing motorized mill with the optional MaltMuncher high torque motor designed to work with the MaltMuncher 2 roller and MaltMuncher 3 roller grain mills. Features: 6 lb hopper and crank handle Great for use with a power drill Cold rolled steel rollers sized at 5" long by 1.25" diameter Adjustable rollers at both ends to move the gap from .025" - 0.1" If motorized we recommend 200 rpm 12 TPI knurl to effectively pull grain through the rollers while still leaving the hulls intact to later form an excellent filter during the sparge 10 mm crank shaft KegLand Part Number: KL03254 Please note: This mill is designed for use with brewing grains only. It will not work for cracking whole kernel corn.

    $131.99

  • Erlenmeyer Flask - 3000 ml

    Erlenmeyer Flask - 3000 mL

    17 reviews

    The best brewers make large yeast starters to get their beer fermenting fast. Large populations of active yeast help ensure flavorful beer free of off flavors. Our large 3000ml Erlenmyer Flask is a great vessel to make a large yeast starter for 5 gallon lagers and high gravity brews. Because it is made from borosilicate glass you can move it from a boil on your gas stove into a cold water bath for cooling, without the risk of cracking. (We do not recommend the use of an electric element. If this cannot be avoided, we recommend using a larger pot as a hot water bath on the stove.) This means you can do the whole process in one container, keeping it simple and helping to reduce the risk of contamination when transferring from one container to another. Recommended Process for Use of Flask: Double Boiler Method It is important for your safety to heat water in the flask with a heat source that distributes heat evenly. Our manufacturer has confirmed that direct heat to the glass can break down its integrity and break if the heat source doesn't distribute evenly. Morebeer! recommends using the "double boiler method." This process involves using a boiling water bath on the outside of the flask to heat up the water inside the flask. All you need is a kettle 3 gallons or larger. This process is much safer and efficient. If the flask should break or boil over, your kettle will be there to collect the contents, thus keeping your stove clean and keeping you away from potential harm. Features Massive 3L (3000mL) Capacity Made from Borosilicate Glass Fantastic price for a flask of this size Produced for MoreBeer! " base " top "H Why make a yeast starter? (from our FAQ) We build starters for 3 main reasons. First, to ensure yeast health. By making a starter 1-3 days in advance, you ensure that your yeast is healthy and strong and ready to do its job. Second, to create more yeast. By making the starter you will increase the cell count of the yeast, giving you a better chance of keeping bacteria's and wild yeasts from fermenting your wort. Third, if you are making high gravity beers. If you are making a high gravity beer (1.060+) you will need more yeast to start the ferment faster. High gravity beers will also finish more completely when you pitch ample quantities of yeast. In the lab world, these flasks are known as "Student Grade". A great flask for making yeast starters!(Student grade is not the highest grade flasks and will have minor defects) Kegland Part Number: KL03995

    $29.99

  • KegLand pH Meter - pH Buffer Solution Powder 3-Pack (4.00/6.86/9.18) KegLand pH Meter - pH Buffer Solution Powder 3-Pack (4.00/6.86/9.18)

    KegLand pH Buffer Solution Powder | 3 Pack | 4.00/6.86/9.18

    1 review

    Use buffer solutions to keep your pH meter calibrated. These are the same 3 solution powders that are included with the KegLand pen-style pH meter (MT624). We would strongly recommend if you haven't used your pH meter in a while to always use a buffer solution before you start your brew. Directions: Completely empty the powder into a clean glass jar Add 8.5 oz of deinoized water Stir until the powder has completely dissolved KegLand Part Number: KL06279

    $5.29

  • FermZilla - 27L Conical & 60L All Rounder Jacket FermZilla - 27L Conical & 60L All Rounder Jacket

    Insulating Jacket for FermZilla 27L Conical or 60L All Rounder

    16 reviews

    Use this insulating jacket to regulate the fermentation temperature in your 27L FermZilla Conical or 60L FermZilla All Rounder. The jacket alone will help keep your fermenter warm in the colder months, or you can add a FermWrap heater if the heat fermentation isn't enough to maintain temp. Conversely, you can freeze bottles of water and put them inside the jacket to keep the temperature from getting too hot. If you're feeling extra fancy, use frozen water bottles and a FermWrap plugged into a temperature controller. The frozen water bottles will provide constant cooling, and if the controller detects that the temperature has dropped too far, it will kick on the FermWrap to heat your fermenter back up to your target temp. The jacket has the added benefit of protecting your fermenting beer from harmful UV light. Features a single sided zipper and draw string bottom. Kegland Part number: KL1148

    $49.99

  • (Pack of 20) Stepless Clamp - Stainless - For 5/8" OD Tubing

    Stepless Hose Clamp - 5/8 in. OD Tubing (20 Pack)

    1 review

    Stepless clamps are the best choice for your home draft set up. Standard worm drive hose clamps are nice for reusability, but they aren't ideal for beer and gas lines because they tend to pinch on one side, leading to leaks or degraded pressure holding capacity of your draft system. Stepless clamps apply even compression around the whole diameter of the tubing line, tightening in a perfect circle. They can be tightened with the middle cutter on a pair of pliers, or better yet, with the Stepless Clamp Tool (H1006). For tubing with 5/8" outer diameter (14-16 mm OD) Stainless steel Pack of 20 Kegland Part Number: KL06712

    $10.99

  • (Pack of 20) Stepless Clamp - Stainless - For 1/2" OD Tubing

    Stepless Hose Clamp - 1/2 in. OD Tubing (20 Pack)

    2 reviews

    Stepless clamps are the best choice for your home draft set up. Standard worm drive hose clamps are nice for reusability, but they aren't ideal for beer and gas lines because they tend to pinch on one side, leading to leaks or degraded pressure holding capacity of your draft system. Stepless clamps apply even compression around the whole diameter of the tubing line, tightening in a perfect circle. They can be tightened with the middle cutter on a pair of pliers, or better yet, with the Stepless Clamp Tool (H1006). For tubing with 1/2" outer diameter (12-14 mm OD) Stainless steel Pack of 20 Kegland Part Number: KL06705

    $10.99

  • Stainless Steel Spoon - 24 inches long

    Stainless Steel Brewing Spoon - 24 in.

    8 reviews

    24" long stainless steel spoon, great for stirring boiling liquids, mixing in hops, etc.  Features a wide stamped handle, and a hang hole at the end.

    $10.99

  • FermZilla - Flat Twister Lid w/ O-ring - 3-hole for Temp Twister and Thermowell FermZilla - Flat Twister Lid w/ O-ring - 3-hole for Temp Twister and Thermowell

    FermZilla Flat Twister Lid

    2 reviews

    The Flat Twister Lid comes with 3 pre-drilled holes perfectly sized for the Duotight bulkheads that come with the Temp Twister Cooling Coil and FermZilla Thermowell. Lid o-ring included. This lid is only recommended for FermZilla users that will be using the Temp Twister and the Thermowell together. Kegland Part number: KL15059

    $10.99

  • FermZilla - Collection Container w/ Lid, Caps, O-ring FermZilla - Collection Container w/ Lid, Caps, O-ring

    FermZilla Collection Container | 34 oz | 1,000 mL

    4 reviews

    If you're a FermZilla owner, we highly recommend picking up an additional collection container or two. Use one to harvest and store your yeast, and then a second for your dry hop additions. Or harvest and store multiple yeast cultures in multiple collection containers. The collection container features threaded ports that are compatible with the KG500 Ball Lock Cap. Attaching the ball lock cap will allow you to purge the container of oxygen before dry hopping. Or attach a small length of tubing with a diffusion stone and you'll be able to oxygenate your wort or carbonate your finished beer from the bottom up. The container is made from Tritan and the lid from HDPE. Kegland Part number: KL11365  

    $21.99

  • pH Paper - 4.6 to 6.2 For Beer - Vial of 100 Strips pH Paper - 4.6 to 6.2 For Beer - Vial of 100 Strips

    pH Paper - 4.6 to 6.2 (100 Strips)

    11 reviews

    pH indicator strips in the range of 4.6 - 6.2 pH, the ranges typically seen in brewing. The vial contains 100 strips, and a color reference chart for determining the pH on the outside of the vial.

    $14.99

  • Thermowell - 15" Long w/ #10 Silicone Stopper Thermowell - 15" Long w/ #10 Silicone Stopper

    #10 Silicone Stopper Thermowell

    19 reviews

    This carboy thermowell is used in conjunction with the Digital Controller, FE601A, FE610A, or FE602, to more accurately regulate internal temperature during fermentation. It is exceptionally useful during the start of fermentation when the lag between ambient temperature in the refrigerator and actual temperature in the carboy can vary greatly. Now you can keep your beer or wine within one degree of the set point on your digital controller. Designed to fit either 3, 5 or 6 gallon PLASTIC carboys or any other similarly sized opening hole. The unit comes with a 15" stainless steel thermowell and a #10 silicone stopper that will accommodate our sanitary filter, FIL90, as well. It can be used in any container with a stopper opening of this size where you need to accurately monitor and control liquid temperature. Will not work with Johnson Temperature Controllers (FE60 or FE61) because the probes are too large. Need a thermowell for a glass carboy? See related product. Inner Diameter of Thermowell: .255" Works with new 2016 Rancos

    $27.49

  • Milwaukee pH Meter w/ATC (Milwaukee# MW102) Milwaukee pH Meter w/ATC (Milwaukee# MW102)

    Milwaukee pH Meter With ATC

    33 reviews

    Get an extremely accurate reading with this rugged bench-top pH meter. It offers the highest accuracy meter, with ATC, featuring a separate temperature probe for temperature readings independent of the electrode. The separate temperature probe allows you to check the temperature before submersing the electrode. Even though the name says "Bench-Top" it can easily be handheld. Temperature reading is in Celsius. For long term health of your electrode, use our highly recommended pH storage solution MT618. Features include: Automatic Temperature Compensation up to 50 C (122 F) 0.01 accuracy with a 0-14 pH range Push button calibration 2 year instrument warranty from Milwaukee 6 month electrode warranty 500 hour run-time on the battery Download the PDF

    $195.20

  • Fermentation Heating Wrap Belt - With Velcro Strap (30watts) 110-120V Fermentation Heating Wrap Belt - With Velcro Strap (30watts) 110-120V

    Fermentation Heating Wrap Belt w/ Velcro Strap

    2 reviews

    This heating wrap provides excellent coverage for your FermZilla Conical, All Rounder, glass carboy, or PET fermenter. The large surface area ensures that heat is applied evenly to your fermenting beer. The 30-watt goes even further when paired with insulation and will lead to less temperature swings. It will provide plenty of heat while still being perfectly safe to use with plastic fermenters. And it features a convenient Velcro strap to hold itself in place—no need for electrician's tape that will leave gunky residue behind! For the ultimate temperature control with your FermZilla, pair the heat wrap belt with the Temp Twister Cooling Rod and control both heating & cooling with an Inkbird Temperature Controller. 110V plug. Approx. 39" x 9.75" KegLand Part Number: KL26048

    $38.49

  • LaMotte - BrewLab Basic Water Test Kit - 7189-02

    LaMotte - BrewLab Basic Water Test Kit 7189-02

    41 reviews

    The BrewLab Basic® water testing kit, model 7189-02, for home brewers quantifies 7 important water test factors. Experts agree water conditions affect your final product, so take the mystery out of making great beer. Looking for a digital pH test? Check out the BrewLab® Plus! Trust LaMotte, the water analysis experts since 1919, to help you control your most important ingredient - water! Visit HomeBrewFinds.com for a hands-on review of the LaMotte BrewLab water test kit. For more information on water and its role in the brewing process, check out Water, A Comprehensive Guide for Brewers written by John Palmer and MoreBeer!'s own Colin Kaminski. For help with water adjustments, download Palmer's Brewing Water Adjustment App, currently available for iOS devices and coming soon to Android.

    $189.00

  • BrewBuilt Ball Valve - 1/2 in. Stainless Locking Full Port BrewBuilt Ball Valve - 1/2 in. Stainless Locking Full Port

    BrewBuilt® Stainless Ball Valve | 1/2" Locking Full Port

    3 reviews

    This BrewBuilt Stainless Steel Ball Valve features a locking mechanism that keeps the valve from being opened by a child or passing dog while you are brewing.  Easy to clean 2 piece design, constructed from high grade 304-stainless made to last. 1/2" FPT on input and output side. TIP: You can take a ball valve apart using two crescent wrenches. This will allow you to open up the valve to get to the ball and the two PTFE gaskets that form the seal when closed. Features: 1/2" FPT on inlet and outlet Locking Mechanism on Handle 304 SS construction with PTFE gaskets Two-Piece Construction for easy cleaning Full Port design for minimal pressure loss / resistance BrewBuilt: Designed for Brewing, Built to Last.

    $14.99

  • Rubber Stopper - #2 With Hole

    Rubber Stopper - #2 With Hole

    3 reviews

    Stopper #2 - with 3/8 inch hole. Top diameter 0.83 inches (21 mm), bottom diameter 0.63 inches (15.8 mm), length 1 inch (25 mm). BPA-free stopper made of food grade materials. Injection molded TPE for superior consistency throughout. Perfect for use with carboys, as the material sticks well to glass and PET, even when wet. To create a solid stopper, simply use a #000 solid stopper (FE400) to plug the hole. Max. Temperature Rating: 158 °F (70 °C).

    $0.99

  • BevBright 3 Micron Beverage Filter - PLACEHOLDER BevBright 3 Micron Beverage Filter - PLACEHOLDER

    BevBright® Beverage Filter - 3 Micron

    15 reviews

    BevBright's three micron filters are disposable, multi-zoned, cartridge style filters perfect for filtering beer with any standard 10" filter cartridge housing. BevBright achieves superior efficiency by being the first to spin different diameters of poly strands on the same filter core to create zones of filtration. The zone closest to the core contains consistent, tight fibers for final filtration while the final outer layer zone is spun with larger fibers for increased sediment holding capacity and increased flow capacity. The best of both worlds. By comparison typical spun poly water filters are spun with only one size of fiber. Note that these are True 10" Filter Cartridges that rely upon the housing being closed tightly in order to engage the Knife Seals & eliminate bypass. 3 Micron Filters 3 micron filters are our recommended size if you have not filtered before. They are a good compromise between the fine filtration of 1 micron and the rougher filtration of 5 microns. Since yeast cells are sized between 5-10 micron a 3 micron filter will remove yeast. What Efficiency rating should I choose? We suggest you start with the Super High Efficiency rated filters and adjust from there. High Efficiency - Removes 90% of the material 3 micron or larger in a single pass. Super High Efficiency - Removes 98% of the material 3 micron or larger in a single pass. Absolute Rated - Removes 99.8% of the material 3 micron or larger in a single pass. More Information on Efficiency Ratings The efficiency rating tells you what % of material, at the given micron rating, will be filtered out in a single pass. Cheaper spun poly water filters are never rated for efficiency because they only remove 60-80% of the material at a given micron rating in a single pass. BevBright offer three levels of efficiency to fit any brewers budget or need. The High Efficiency rated filters work better than any 3 micron rated hardware store spun poly filters . The Super High Efficiency filters represent great value. They remove 98% of material in a single pass for just a little bit more money. Absolute rated filters are more typically used in the wine industry but are available for discerning brewers that want the highest efficiency possible.

    $5.99 - $14.99

  • BevBright 5 Micron Beverage Filters - PLACEHOLDER BevBright 5 Micron Beverage Filters - PLACEHOLDER

    BevBright® Beverage Filter - 5 Micron

    4 reviews

    BevBright's Five Micron Filters are disposable, multi-zoned, cartridge style filters perfect for filtering beer with any standard 10" filter cartridge housing. BevBright achieves superior efficiency by being the first to spin different diameters of poly strands on the same filter core to create zones of filtration. The zone closest to the core contains consistent, tight fibers for final filtration while the final outer layer zone is spun with larger fibers for increased sediment holding capacity and increased flow capacity. The best of both worlds. By comparison typical spun poly water filters are spun with only one size of fiber. Note that these are True 10" Filter Cartridges that rely upon the housing being closed tightly in order to engage the Knife Seals & eliminate bypass. 5 Micron Filters 5 micron filters are the best choice when there is visible haze in your beer. A 5 micron filter will remove almost all yeast and is less likely to clog than a 3 or 1 micron filter. Already have pretty clear beer and just want to make it shine? Check out our 3 micron or 1 micron filters. What Retention Efficiency rating should I choose? We suggest you start with the Super High Efficiency rated filters and adjust from there. 90% High Efficiency - Removes 90% of the material 5 micron or larger in a single pass. 98% Super High Efficiency - Removes 98% of the material 5 micron or larger in a single pass. 99.8% Absolute Efficiency - Removes 99.8% of the material 5 micron or larger in a single pass. More Information on Efficiency Ratings The efficiency rating tells you what % of material, at the given micron rating, will be filtered out in a single pass. Cheaper spun poly water filters are never rated for efficiency because they only remove 60-80% of the material at a given micron rating in a single pass. BevBright offer three levels of efficiency to fit any brewers budget or need. The High Efficiency rated filters work better than any 5 micron rated hardware store spun poly filters . The Super High Efficiency filters represent great value. They remove 98% of material in a single pass for just a little bit more money. Absolute rated filters are more typically used in the wine industry but are available for discerning brewers that want the highest efficiency possible.

    $5.99 - $14.99

  • FermZilla Floating Dip Tube - Stainless Float + 80cm Silicone Dip Tube

    Replacement Floating Dip Tube for FermZilla

    7 reviews

    Direct replacement of the 31" floating dip tube included with the FermZilla Pressure Kits. If you're looking for a floating dip tube to use with your homebrew keg, we recommend the Torpedo Buoy™, which includes an appropriately sized metal dip tube and features a higher quality silicone tubing. Kegland Part number: KL14076

    $16.49

  • Premium Breathable Silicone Bung for Barrels and Variable Volume Tanks

    Premium Breathable Silicone Bung for Barrels and Variable Volume Tanks

    18 reviews

    We recently discovered this premium breathable silicone barrel bung and were immediately impressed with its robust design and features. To start with, the built in tabs really help make bung removal effortless. But where the bung really shines is in its two-piece design. When set to the open position, the bung acts as an airlock and allows the release of CO2 while maintaining a seal against oxygen coming in. This makes the bung ideal for alcoholic or malolactic fermentation in barrels or tanks. When fermentation is over and you no longer want the bung to "breathe" out, you just push the center cap into the bung to create a firm seal and the FE497 becomes a solid stopper! Fits most 30 and 60 gallon barrels as well as the hole in the lid of most Variable Volume tanks! tapers from 1 7/8" to 2 1/4" diameter

    $11.99

  • Brewmaster Kettle - 5 Gallon Brewmaster Kettle - 5 Gallon

    Brewmaster 5 Gallon Stainless Steel Kettle

    31 reviews

    Smaller home brews should still produce results that are just as tasty as larger batches, which is why this 5 Gallon Stainless Steel Kettle is an excellent addition to your home brew setup. This small 5 gallon brewing kettle is a great kettle for the beginning brewer to learn on, as it holds a manageable sized batch and it’s available for a very affordable price. Although this brew kettle is quite economical, it’s also made of high quality 202 stainless steel that is anything but cheap. The 0.5-mm thick sides and bottom are more than thick enough for this amount of liquid, and the riveted stainless steel handles on the kettle’s body make it easy to carry even when filled. This 5 gallon kettle can safely hold up to 3 gallons of wort while boiling, making it the perfect size for extract brewing right in your own home!   Features: 0.5mm thick stainless sides and bottom 10" H x 12.5" D Riveted Handles on Kettle Body Kettle Lid with riveted handle 5 gallon full capacity (3 gallons while boiling) Perfect size for Extract Brewing!

    $29.99

  • Blichmann HellFire Floor Standing Burner Blichmann HellFire Floor Standing Burner

    HellFire Floor Standing Blichmann Burner

    64 reviews

    Efficient, fast, and versatile.  The new burner from Blichmann Engineering is appropriately named HellFire™!   This dual mode capability burner is unlike anything else on the market and is sure to satisfy all your heating needs.  No wonder it is patent pending!  This custom made burner is tuned to operate in high efficiency mode, and also in a secondary high power mode.  In the high power mode, you'll be amazed with 140,000 BTU/hr output for blazing fast heating - double the power of the previous design.  Waiting for a boil is now a thing of the past.  In the high efficiency mode, you'll get 80,000 BTU/hr and superb heat transfer to the wort and whisper quiet operation.  Plenty of power to keep a rolling boil on a 20 gal batch of beer.  Even our efficiency mode has significantly more power than the competition!  To top off all that power we include a patent pending heat shield to keep that massive power off your valve and thermometer and direct it to your wort. Features: Dual mode capacity High Power Mode: 140,000 BTU/hr Efficiency Mode: 80,000/hr Patent Pending Clip-on Heat Shield keeps valves cool Kettle Retaining bars adjust to accommodate kettles up to 20" in diameter Heavy Gauge Rust free Stainless Steel Construction will keep you brewing for years! Designed for outdoor use, the heat shield and body will protect your brew from wind Can accommodate kettles up to 20" Diameter or 250 lbs. (175 when using leg extensions) Leg Extensions are expected to be available in Late November.  

    $217.99

  • MaltMuncher - PPE Base Board MaltMuncher - PPE Base Board

    Malt Muncher Grain Mill - PPE Base Board

    5 reviews

    This premium Polypropylene Base Board is for the Malt Muncher 2 Roller or 3 Roller Grain Mill. Perfect for slotting over a food grade bucket, or building your own little shelf on wheels. This new design is compatible with both MaltMuncher Mills.  It has several different holes pre-drilled so either mill can be easily mounted. Board Dimensions - 17.75" x 13.5" x 3/8" Please note: Does not come with screws (M6 x 1 mm thread, 20 mm long).  2 roller mill requires 2 screws, 3 roller mill requires 4. Kegland Part Number: KL09621

    $17.99

  • CoolBot - Walk-In Cooler Controller for window air conditioner CoolBot - Walk-In Cooler Controller for window air conditioner

    CoolBot Walk-In Cooler Controller | DIY Indoor Cooler | Fermentation Locker | Keg Storage | Wine Cellar

    22 reviews

    Build your own walk-in cooler with a standard A/C unit from any hardware or appliance store! The CoolBot enables A/C units to cool below their standard setting of 60°F, allowing you to use them as a low-cost refrigeration alternative Installs quickly with no tools or electrical know-how required—see the videos below! Perfect for turning rooms or storage sheds into a fermentation locker, keg room, wine cellar, food larder, and More! A CoolBot allows a standard air conditioner to cool a room or space down to 35 degrees F. Installs with no tools or electrical knowledge required. Standard A/C units available from any hardware or appliance store have lots of power but they are electronically limited so that they cannot go below 60 degrees F. This is because they would freeze up. Commercial refrigeration for walk in coolers combat freeze with increased surface area on the fins as well as fans. Instead the Cool bot technology uses multiple sensors, a heating element and programmed micro-controller to control your air conditioner in such a way that the unit can go below 60F and not freeze up. The Coolbot cannot give you 100% of the btus listed on your air conditioner nor is suitable for large brewery or winery walk ins. It is perfect for wine cellars, beer storage, fermentation, etc. Easy to install within 30 minutes with no tools or electrical knowleged required. While we can't tell you exactly what size space you can cool because of ambient temperatures and insulation factors, we recommend you google Coolbot. They have sold over 50,000 of these so there are lots of reviews and actual installs out there. We offer free shipping on this unit, ship fast from both coasts, and have great customer service. This type of system is also very efficient. Most commercial systems are power hogs with large fans that are always running. Residential A/C units are made for efficiency. The Coolbot will also shut down the compressor for short time when the unit is running at its highest level of inneficiency, as it nears freeze up. Dims of the CoolBot are 6.5x3.5x1.5 in. Product Introduction DIY Indoor Cooler Mobile Walk In Cooler For the WiFi-enabled model, see the CoolBot Pro.

    $374.00

  • Tilt Hydrometer and Thermometer - Red Tilt Hydrometer and Thermometer - Red

    Tilt™ Hydrometer and Thermometer - Red

    11 reviews

    Track your fermentation progress without ever disturbing your wort! The Tilt Hydrometer and Thermometer is added directly to your fermenter to provide real-time data on the current gravity and temperature of your wort, eliminating the hassle and potential contamination that comes from opening your fermenter to pull samples. The Tilt is especially useful for brewers fermenting in glass carboys or plastic fermenters that don't have spigots for sample taking. Designed for homebrewing, the Tilt hydrometer lets you instantly read your brew's specific gravity and temperature on your compatible Apple iPhone/iPad or Android smartphone/tablet or Tilt Pi. Most Bluetooth 4.0+ devices will work with the Tilt. You can then optionally log data to the cloud using their free Google Sheets template or other 3rd party cloud platforms. Tilt's goal is to help homebrewers brew better beer. The Tilt hydrometer allows you to check the specific gravity and temperature of your beer while it's fermenting, without ever having to open your fermenter or pour out any of your precious brew. This makes brewing more consistent and easier to track. Here are some of the new features of the Tilt: Range: Better reception and range. With the increased transmission power your Tilt will send data through larger, thicker-walled fermenters. Precision: Upgraded sensors. With an improved temperature sensor and accelerometer your Tilt will operate with more precision. Efficiency: Reduced power consumption so more brews, less battery changing. New Look: Newly designed custom circuit board and harness. If using multiple Tilt hydrometers for different batches of fermenting beer you must use a different color for each batch. The app will not read multiple hydrometers of the same color. Each Tilt comes calibrated and ready to go with a pre-installed battery that lasts 12-24 months depending on usage. Just download the free app, sanitize your Tilt, drop it in your fermenter, and start taking readings with your phone, tablet, or Tilt Pi. The specific gravity is accurate +/- 0.002 within the Tilt's range of 0.990 to 1.120. The thermometer is accurate +/- 1°F (+/- 0.5°C). Download the free Tilt app at the Apple App Store or Google Play Store or get the free Tilt Pi download.

    $135.00

  • Brewing Gloves - PLACEHOLDER Brewing Gloves - PLACEHOLDER

    Brewers Gloves

    11 reviews

    These are a great add to any brewery.  Overly long so as to cover the entire forearm for reaching into sanitizer buckets, these gloves will protect you from all brew day hazards!  These will help reduce the risk of getting burned or scalded by your brew, and keep caustic cleaners and sanitizers away from your skin! 

    $16.49

  • Paddle - Hardwood 36 in Paddle - Hardwood 36 in

    Mash Paddle Hardwood - 36 in.

    10 reviews

    Classicly styled hardwood mash paddle for stirring large amounts of grain.  This paddle features a "T" handle for better maneuverability.  They are made in the USA from white birch. 36 inches long. 

    $29.99

  • Low stock! Ball Lock Quick Disconnect (QD) Adjustable Spunding Valve W/Pressure Gauge Ball Lock Quick Disconnect (QD) Adjustable Spunding Valve W/Pressure Gauge

    Ball Lock Valve With Gauge and PRV

    18 reviews

    Relieves pressure while filtering from one keg to another plus allowing reading the pressure in the receiving keg.  Notes: The very end of the pressure relief valve can be adjusted by unscrewing to adjust the pressure. If tight, and not adjustable by hand, it needs to be loosened with pliers. Wrap a towel around the end piece of the pressure relief valve (about  the last 1/4 in) and loosen with pliers. Then finger tighten or loosen to desired pressure. Gauge reads 0 - 15 psi    

    $47.49

  • Submersible Pump 800 gph Submersible Pump 800 gph

    Submersible Pump - 5 gal.

    2 reviews

    If you're searching for an affordable pump to use with your temperature control system, look no further. This submersible pump can be easily integrated with an icebank or glycol chiller. Don't be fooled by its low-profile compact design. With a flow rate of 800 gallons per hour and a max lift height of nearly 10 feet, this pump will keep the solution moving in your chilling system with ease. Comes with interchangeable 1/2 in. and 3/4 in. plastic barbs.   We recommend this pump for maintaining the temperature of any batch size fermentation that is less than 10 gallons.   Maximum flow rate: 800 GPH Max lift height: 9 ft. Comes with 2 barb fittings - 1/2" & 3/4"  High quality 60W motor runs quiet Stainless steel impeller shaft 6 ft. long power cord

    $32.99

  • Mighty Mill 2 Roller Grain Mill w/ Base Mighty Mill 2 Roller Grain Mill w/ Base

    Mighty Mill 2 Roller Grain Mill | Stainless Steel Knurled Rollers | Adjustable Gap Setting | 7 lb Hopper Capacity | Metal Base Included

    19 reviews

    Mill your own grains on brew day for increased freshness and higher efficiency! Adjustable gap setting allows you to fine tune your preferred crush level and adapt to the kernel size of different malts Gap settings are etched into the mill body for easy reference 304 stainless steel knurled rollers efficiently pull grain through while leaving hull intact to form an excellent filter bed for sparging 2 roller mills are great "first mills" for homebrewers expanding their brew kit. Economical and gets the job done! Included crank handle can be detached to power the driven roller with an electric drill or motor Comes with metal base featuring guides on both sides to help secure the mill when placed over a bucket Milling trouble never hangs around when it hears this Mighty sound! The Mighty Mill will be a superhero in your brewery while still being one of the most affordable full grain mill setups. Featuring 304 stainless steel knurled rollers, 7-pound aluminum hopper, with base board and mounting hardware included. Easily operate via the crank handle, or remove the crank and rotate the driven roller with an electric drill. The adjustable rollers can be set in a gap range from 0.025" to 0.1", allowing you to fine tune your crush based on the grain and personal preference. 7 lb aluminum hopper Smooth grip crank handle Adaptable for use with power drill 304 knurled steel rollers Adjustable gap setting from 0.025" to 0.1" Metal base board sits comfortably on 5- or 6.5-gallon plastic buckets Please note: This mill is designed for use with brewing grains only. It will not work for cracking whole kernel corn.  

    $144.99


You have seen 96 out of 997 products

Frequently Asked Questions

Beer Brewing Equipment Collection Article +

Home Brewing Beer Making beer at home is easy, rewarding and can lead to some amazing friendships & interactions. Like most people I started brewing at home with beer brewing kit from MoreBeer! The kit came with everything I needed to brew a batch of beer at home. Typical of most homebrewing starter kits, the equipment and beer recipe ingredients where for extract brewing. I know a lot of people that just dived right into all-grain brewing and there is nothing wrong with that approach. For myself and what I recommend to others as well is starting with extract brewing. It allows you to focus on a few steps in the brewing process as you are essentially starting from the boil. I think the old saying crawl, walk, run applies beautifully to learning to brew and most anything in life. By starting with extract you can focus on, in my opinion the two most important things in brewing; cleaning / sanitation and fermentation. Not to say can’t jump into all grain brewing and give these topics the respect they deserve. It’s just a lot easier to focus on and learn a few things at a time. After all you don’t eat an entire pizza at once, you have one slice at a time. Once you have brewed a few batches of extract beer a good natural progression is to try what they call a mini-mash. This essentially allows you get some of your sugars from mashing grains but still back it up with liquid or dried malt extract. Aside from allowing you to learn the brewing process in steps, it also allows you to upgrade your brewing system over time. Purchasing a complete all grain system can be expensive and if you’re just starting a new hobby it’s nice to spend as you go. However with systems like the RoboBrew/BrewZilla, getting started with all-grain brewing has never been more affordable and accessible.  When I started brewing these type of systems were not available though. Either way, most extract brewers move to all-grain brewing; as it allows you to take complete control over your beer recipe and intern the finished beer your making. Another topic worth mentioning is the social aspect of beer & brewing. We all know beer is a social drink, heck this country “The United States” was founded in pubs by revolutionary individuals. Sure it’s fun to sit back and enjoy a pint of a beer you made. But it’s even funnier to share a pint with friends and family. That leads to another great way to learn and improve your brewing, joining a homebrew club! For the first few years of my brewing career I brewed alone and only shared by creations with family and friends. It wasn’t until I was selling some homebrew equipment on the internet that I was directed towards joining a homebrew club. The person purchasing equipment from me asked if I was aware of the local homebrew club. It really never crossed my mind to seek out or join a club, but let me tell you; it was one of the best recommendations and things I could have ever done. Not only do you meet and network with likeminded brewers like yourself; the friendships that have come from the club have not only enriched my life it has my family as well. I know being social may not be for everyone, but meeting and speaking with other brewers is a great way to get More! out of an already amazing hobby! Regardless of your brewing path, be it extract or all grain or alone or with others; always remember to keep learning and have fun brewing, cheers!

BEER Collection Article +

What is Beer? Beer is a delicious alcoholic drink that is made by yeast, fermenting a malt sugar & water mixture that is typically flavored with hops. It has been brewed since the dawn of civilization, in fact, it’s even been credited for saving the world by some scientists and historians. The earliest evidence of beer production dates back to about 3500 BC. However, there is speculation that it was being produced as far back as 10,000 BC when humans first started farming malts. The ancient Sumerian text "The Hymn to Ninkasi" is a prayer but could also be considered the earliest written beer recipe. For thousands of years fermented malt beverages were being consumed by numerous civilizations, but none of them really resembled what we know as Beer today.  It wasn’t until 1516 AD in Bavaria when the Reinheitsgebot (Beer purity law) was adopted that it started to look, smell and taste like the alcoholic drink we all know and love today. The Reinheitsgebot is actually credited as the oldest food-quality regulation in history and is still in use to this day. It states that the only allowed ingredients in Beer are water, hops and malted barley.  Today, Beer is the third most popular drink in the world with only water and tea in front of it. Cheers to a long history, a bright future and another round of our favorite drink, BEER! Types of Beer One of the reasons it's is so popular is that there is literally something for everyone. Beer styles can range from sweet to bitter or even sour and everything in between. Beer is commonly categorized into two varieties: Ales and Lagers . An Ale is produced with a top fermenting yeast called Saccharomyces cerevisiae. This strain of yeast typically clumps together and rises towards the top of the fermenter. The recommended fermentation temperature range for ale yeast is between 15–25°C (59–77°F). Ale yeast is known for its higher ester production that is commonly described as “Fruity” and comes across as apple, pear, pineapple, etc. A Lager is cool fermented and produced with a bottom fermenting yeast called Saccharomyces pastorianus. This strain is typically fermented around 7–12°C (45–54°F) and then aged at even cooler temps for several weeks or up to several months. The original German word lager means “storehouse” representing this cold storage step, but now the term is synonymous with a beer style and not the literal interpretation. Less popular than the two previous styles, but none less delicious, is the Lambic styles of Belgium , also called “Wild” or “Mixed Fermentation” in regions outside of Belgium. These styles are fermented with a Saccharomyces strain of yeast as well as Bretttanomyces and Lactobacillus bacteria. This use of bacteria gives them a sour or “funky” taste. These three high level classifications are only the tip of the iceberg when it comes to beer styles. In fact, there is an organization called the BJCP ( Beer Judge Certification Program ) that was founded in 1985 to encourage the knowledge and understanding of the world’s diverse styles. As of their last published style guidelines, there are 34 top level styles with over 100 substyles categorized. And with how popular craft beer has become lately, this list of recognized styles will only continue to grow. Making your own Beer If you found this page and read your way down to this section you obviously love and enjoy beer. In our experience one of the most enjoyable beer is the one you made yourself. Not only is it very rewarding and enjoyable it’s super easy to get started making your own beer at home . You can start with just a few pieces of brewing starter equipment and make amazing beer. Just as types can be boiled down (pun intended) to two high level classifications, so can brewing beer. These types are called Extract Brewing and All Grain Brewing . Extract brewing is what most home brewers start with due to it requiring less equipment and fewer process steps overall. With extract brewing you primarily just need a boil kettle and a fermenter . A majority of the malt sugars you will be fermenting come from an “Extract ”, LME ( Liquid Malt Extract ) or DME ( Dried Malt Extract ) hence the name. With all grain brewing you need a few more pieces of equipment as you will be creating your own malt sugars from scratch using crushed malted grains. In most traditional all grain brewing systems you have three vessels, a HLT (Hot Liquor Tank), MT (Mash Tun) , BK (Boil Kettle) and a Fermenter. There is also a hybrid approach called BIAB (Brew In A Bag) that allows you to perform an all-grain brew in a single vessel. With extract brewing, a typical brew day takes about 2-3 hours from start to finish, whereas all grain brewing typically takes about 4-6 hours. Both types of brewing can create amazing results and have different advantages to them. To learn More! about brewing in general click the Brewing button below.

Login

Forgot your password?

Don't have an account yet?
Create account