As expected. Gets the job done

Fits hoses as small as 3/8. Use as needed!

Bought with Silicone Hose to repair coffee pot internal part that rotted. Worked great with hose that I also purchased here.

The clamps function like you expect (use a 1/4" socket driver), however I noticed that my magnetic bit tip, was able to hold clamp in mid air - from anywhere on the clamp! I suspect these are a lower grade ferritic stainless that may actually corrode. Austenitic (304,316,etc) stainless doesn't (normally) have magnetic properties and is less likely to corrode in our brewing environment.I used em anyways. I noticed that on 1/2" tube they have about a 1/4" tab remaining once tightened down.The edges are not sharp like other clamps and the rounded corners on the tab, thankfully don't cut soggy hands.

Work as designed. Only shortcoming is that they can sometimes strip if you crank them with the wrong size bit, but that only happened to me once out of 20x.

Worth the money. Great quality.

Works great - not sure the material, but haven't had corrosion on mine.

More Beer Rocks! These clamps are cheaper than the hardware store or even Amazon!

I use about 20 of these every brew day. Of course I reuse them but I always have extra around

These hose clamps are long lasting, albeit a bit pricey.