Brewing Burners & Gas Fittings

Check your fermentation temperature "at-a-glance" with this stick-on liquid crystal thermometer. Waterproof adhesive sticks to glass, plastic and metal, making it compatible with virtually any homebrew fermenter. No need to open your fermenter to take temp readings, and no need to buy a temperature probe or additional equipment. Take a quick peek and know what temp your fermentation is at immediately. Scale reads from 39 - 97°F (4 - 36°C).  

Read more less

Efficient, fast, and versatile.  The new burner from Blichmann Engineering is appropriately named HellFire™!   This dual mode capability burner is unlike anything else on the market and is sure to satisfy all your heating needs.  No wonder it is patent pending!  This custom made burner is tuned to operate in high efficiency mode, and also in a secondary high power mode.  In the high power mode, you'll be amazed with 140,000 BTU/hr output for blazing fast heating - double the power of the previous design.  Waiting for a boil is now a thing of the past.  In the high efficiency mode, you'll get 80,000 BTU/hr and superb heat transfer to the wort and whisper quiet operation.  Plenty of power to keep a rolling boil on a 20 gal batch of beer.  Even our efficiency mode has significantly more power than the competition!  To top off all that power we include a patent pending heat shield to keep that massive power off your valve and thermometer and direct it to your wort. Features: Dual mode capacity High Power Mode: 140,000 BTU/hr Efficiency Mode: 80,000/hr Patent Pending Clip-on Heat Shield keeps valves cool Kettle Retaining bars adjust to accommodate kettles up to 20" in diameter Heavy Gauge Rust free Stainless Steel Construction will keep you brewing for years! Designed for outdoor use, the heat shield and body will protect your brew from wind Can accommodate kettles up to 20" Diameter or 250 lbs. (175 when using leg extensions) Leg Extensions are expected to be available in Late November.  

Read more less

A powerful, 304 stainless steel heating element well suited for most kettles. With its weldless design and a diameter of 1.25", it's easy to install. Simply drill a 1.25" hole in your kettle and tightening the nut from the outside. The heating element requires a power cord which can be purchased separately. Electrical connection requires a computer power connection IEC320 C13 to your 110 or 220 v plug). Available in either 1600 watt 110 volt or 2200 watt 220 volt. Features: Food grade, high temperature silicone seal The element itself is 11.5" long, 0.75" diameter Designed for use with 5 gallon batches Please Note - Having electrical devices around liquid can be hazardous, and should not be left unattended. Please use caution while using this device, and read the instruction manual prior to use. Use the 1.25" Hole Saw to drill a hole for this product.   Kegland Part number: KL03513

Read more less

Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. Leg extensions for the new Blichmann Hellfire burner.

Read more less

Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. This cast iron wide-profile banjo burner is strong and efficient, topping our ratings in getting wort to a quick boil, while using the same amount or less of propane. Adjusted for efficiency this banjo burner produces around 70,000 BTU/hr, and in full, this banjo burner mode produces 100,000 btu.  Banjo burners can often times have issues when using with low flame output.  We sourced and tested a number of different units, before settling on this one, which performs great at low output.  Uses 3/8" male flare fitting (included). Comes with steel orifice plate for regulating airflow The burner has a 9 7/8" diameter and is 14 3/4" long This banjo burner requires a propane regulator to function properly.  We recommend a Wind Guard with these units if brewing outdoors.  If using indoors, you must have proper ventilation in the form of an overhead cooking hood.

Read more less

Perfect for 5 to 20 gallon batch sizes. 3 7/8'' wide at the widest point. You will need our high-pressure, adjustable pressure regulator to operate burner. This is a ring style burner and not a jet burner. The flame distribution and control is great and not concentrated like a jet burner. Will not work with low pressure propane (house propane) or with natural gas. Ideally you want to install these about 4-6 inches below the kettle. These burners do not come with a brass jet. If you need the brass jet for attaching regulator tubing with flare outputs please purchase the H205J. If you intend on plumbing these you will need either a GSS008 or H233 to connect to your gas system. These item is not intended for indoor use.

Read more less

This propane burner is the same as our H210 burner, but for low pressure propane applications. Twenty individual jets combine to produce heat that will boil your water or wort in a hurry. Should be installed and connected by a professional plumber. Flame height is 2 to 3". Ring Diameter is 8" the inlet thread is 1/2" Female Pipe Thread. 20 Jets. This item is not intended for indoor use. These propane burners are not for use on portable propane tanks, they are for use with large propane tanks with regulators that typically feed rural homes where natural gas is not offered.  

Read more less

This is the High Pressure Propane Jet needed for our H205 Burner.  It is used to connect High Pressure Regulator tubing with 3/8" Female Flare Fittings to High Pressure Burners with 1/8" FPT inlets like our H205.  Made out of Brass. 1/8" MPT x 3/8" Flare

Read more less

Preheat your mash before beginning the brewing process with this 1000W Electric Bucket Heater. This handy little tool works in conjunction with a product like the Ranco or Johnson temperature controller by enabling you to set an exact hot liquid temperature on the controller, and then attaching it to the bucket heater. The temperature controller will turn off the bucket heater once it reaches your desired temperature. Our bucket water heater is designed to use with water in a bucket or cooler where an open flame cannot be used, and you can even use it to heat a bucket of water for cleaning with a powdered brewery wash. This water bucket heater measures 17 inches from the handle to the tip and comes with a 6-foot long cord. It requires at least 6 inches of water for full submersion, and it can only be used with a maximum depth of 14 inches.  Unit has stainless steal heating element and guard.  Does not include clip for mounting.  Please Note - Having electrical devices around liquid can be hazardous, and should not be left unattended. Please use caution while using this device, and read the instruction manual prior to use.

Read more less

Replacement Burner For Bayou Classic® Cookers. 6-in Diameter x 11-in Length Air Control Disc Wide Range of Flame Control from a bare simmer to high flame

Read more less

Adjustable propane regulator up to 30 psi. 3/8-in Flare Swivel Connector. For Bayou Classic Banjo Cookers, and Single & Jet Cookers.  

Read more less

Have a weak burner that needs an upgrade? Putting together your own 3 Vessel brewing system? Then this burly Multi-Jet burner is just the ticket.   Twenty individual jets combine to produce heat that will boil your water or wort in a hurry. Should be installed and connected by a professional plumber.    Specifications: Cast Iron body with Brass burner jets 2-3" Flame Height  8" Ring Diameter  1/2" Female Pipe Thread Inlet 20 Jets This item is not intended for indoor use.

Read more less

Threads into black pipe at the bottom of your gas system, for connecting to the 3/8'' female flare fitting on the end of your propane regulator hose. Look at the regulator picture at left. Made from brass.

Read more less

The H205 55,000 burners come with 90 degree angle jets. These work great with a flexible gas line hook up. However, in some hard piped applications a straight jet is needed, so we made one. Threads directly into burner. We use them on our systems

Read more less

Easily connect multiple BrewBuilt AfterBurners together to create your very own brewing stand. Predrilled holes on every BrewBuilt Burner allow for easily assembly. Includes stainless straps for backside connection along wtih a laser cut plate for the front of the stand.  Front plate also includes predrilled holes for mounting a pump bracket. 8 bolt assemblies are included for a rocksolid connection. This beefy mounting plate is made in the US out of thick, 12 gauge 304 Stainless Steel.

Read more less

Add these super-duty casters directly to your BrewBuilt AfterBurner and save your back. Your BrewBuilt Burner comes with pre-drilled holes making installation super easy.  Includes two casters, two stainless steel mounting brackets, and four bolt packages.  When also used with the optional BrewBuilt Handle you will be able to easily wheel your burner into place.  

Read more less

This kit will convert your Anvil Forge Burner to use natural gas.   Includes: Needle Valve Forge Natural Gas Orifice Fitting  

Read more less

Will regulate to 1 psi. The hose is 36-inch LPG stainless braided. Has a 3/8” flare fitting connection with an outside diameter of 5/8”.

Read more less

72,000 BTU/hr output ensures fast and efficient heating Supports kettles up to 20 gallons Modular legs allow for 7”, 16”, and 24” operational heights. (24” extensions sold separately.) Features an upgraded stainless steel ring for long-lasting durability and enhanced performance Available while supplies last! The Anvil Forge™ Burner: Powerful, Efficient, and Fast! Experience the ultimate in performance with the Anvil Forge™ Burner. Designed with durability and functionality in mind, this model features an upgraded stainless steel ring for long-lasting durability and enhanced performance. Key Features: Multiple-Height Operation: Patent-pending modular legs allow for 7”, 16”, and 24” operational heights. Perfect for mounting to a bench, draining directly into a carboy, or creating a 2-tier brew system. (24” extensions sold separately.) Rust-Free Precision: Equipped with a precision-cast burner ring upgraded to stainless steel, ensuring rust-free, durable performance. Self-Leveling Feet: Provides rock-solid stability, even on uneven surfaces. High-Powered Heating: 72,000 BTU/hr output ensures fast and efficient heating. Even Heat Distribution: A large burner surface area eliminates hot spots and maximizes efficiency. Integrated Heat Shield: Protects your valve and thermometer from heat damage with a patent-pending design. Weather-Ready Design: A super-deep burner ring excels in windy conditions. Ultra-Durable Coating: Coated with an ultra-high-temperature finish that resists burning and melting—unlike standard paint. High Capacity: Supports kettles up to 20 gallons. Regulator Included: Comes ready to use with a high-quality regulator. Perfect for brewers seeking power, precision, and efficiency, the Anvil Forge™ Burner is a must-have addition to your brewing setup.

Read more less

This SS handle option is a great upgrade to get your AfterBurner moving!  Combine this with the Caster Package and your AfterBurner will be an easily cartable brewery.  This handle is designed specifically for the Modular AfterBurner Packages, and has drilled holes for easy attaching. Comes with Stainless Steel Handle and Bolt connection packages.  Please note that this handle is designed specifically for the BrewBuilt AfterBurner.

Read more less

Thermoplastic Hose connects regulator to a standard liquid propane appliance. 1/4" MNPT x 3/8" Flare Swivel Brass Connectors. 350-psi Maximum Use. 10-ft hose.  

Read more less

Use this splitter to run two propane burners from one propane tank. In most applications two burners is the max you can simultaneously run from one tank before you start to freeze up the vavle on the propane tank. Works well with BrewBuilt™ AfterBurners, Camp Chef burners, and other brewing related burners.      

Read more less

The H205 55,000 BTU burners come with 90 degree angle jets. These work great with a flexible gas line hook up. However, in some hard piped applications a straight jet is needed, so we made one. Threads directly into burner. We use them on all our systems.

Read more less

Brass Control Valve. 1/4" MNPT x 1/4" FNPT  

Read more less

Low pressure propane regulator converts high pressure propane to low pressure propane. Designed for use with H212 and H209 burner only. This propane regulator does not come with the hose necessary to connect to the burner. You would need to have a professional plumber do the installation. Regulates to 11" W.C. (.4 PSI). Good to about 400,000 BTUs although we can not get an exact value from the manufacturer.

Read more less

American Gas Association certified for gas service. Body and stem are brass. Ball is chrome-plated brass.1/2" fpt on both sides.

Read more less