Give your Chronical insulation to help with maintaining fermentation temp and assist with cold crashing. Specifically sized for the 10-clamp version of the 1/2 bbl unit.
This bushing from Ss Brewtech fits in with a 3/4" MPT and shrinks it to a more common 1/2" FPT. Great for your Chronical 3/4" dump valve. Made from 304 stainless steel.
These chiller coil extensions extend the length of the Ss Brewtech FTSs chiller coil for Brew Bucket and 7 gallon Chronical fermenters. Very useful if you brew partial batches and/or there is a cool ambient temperature forcing you to mostly heat your fermenter. Mounts under the lid to drop the coils further down. Made from 304 stainless steel and leak tested.
IP55 Water Resistant Rating: Ready to handle the messiest brew days and easy cleanup.
Magnetic Drive: Ensures smooth, efficient, and sanitary wort transfer.
360° Pro DIN Fitting: Allows for secure, sanitary, and easy connection with customizable outlet placement.
1.5" TC Center Inlet Head: Engineered for advanced brewing setups including mash recirculation and transfer.
Inspired by countless brew days in our garages and basements, as well as our experience in professional breweries, Ss Brew Pump is our take on a classic piece of brewing gear that is key to so many homebrew setups around the world.
Featuring an IP55 Water Resistance Rating, an easy-to-use DIN Head, Magnetic Drive, and 1.5” TC Center Inlet Head, Ss Brew Pump is engineered to tackle even the messiest of brew days!
IP55 | Water Resistant
Just like the high-quality pumps found throughout craft breweries, the Ss Brew Pump is IP55 certified and ready to handle the messiest of brew days.
From the Ground Up
Designing our own pump is something we have been eyeing for a while. Pumps are critical to any form of advanced brewing. From mash recirculation to transferring wort to cleanup, a quality pump is a key part of every brewday.
Years of working in professional craft brewing environments, where water-resistant pumps are the norm, made the foundation of our brew pump an easy decision. It had to be IP55 rated to handle the unavoidable messes that happen and the cleanups that follow them.
Once we unlocked the design for waterproofing, we turned to a laundry list of specs and features we wanted. That led to the creation of the Ss Brew Pump; one of our favorite products and now a staple in all of our team’s homebrew setups.
Magnetic Drive
It’s no secret that magnetic drive pumps are perfect for brewing applications. Instead of using a direct drive system where sealing off the wort from the drive shaft and motor is a major concern, Ss Brew Pump uses a high-end magnetic drive that allows for smooth, efficient, and sanitary operation.
360° Pro DIN Fitting
Commonly found on Pro Brewing Tanks, DIN fittings allow for a secure and sanitary connection that is also super easy to use. Unlike a TC connection, the DIN Head on Ss Brew Pump allows for a secure connection that applies even pressure on every bit of the silicone seal and is easier to remove and reinstall without having to fumble with a large clamp.
The DIN Head can also be rotated and secured in a full 360 degrees so that you can place the Pump’s outlet exactly where you need it for your brewing setup.
Note: Ss Brew Pump is currently not compatible with Legacy versions of Brew Cube | Pump Mount Plate Kit, Brew Cube | Valve Tree Manifold, and Portable Valve Tree. Ss Brew Pump uses a larger mounting plate and the bolt holes to secure it are in a different pattern than the Chugger pumps these products were originally designed for. We are working to update these products and plan to have them available soon.
What's Included:
Ss Brew Pump
50-120 DIN Pin Wrench
Specifications:
11 gallons per minute flow rate
18 ft Max Head
IP55 Water Resistant
Sanitary DIN Fitting Stainless Head with 1.5" TC Center Inlet
120 VAC 60hz 0.7 A
Assembled dimensions: 5.5” x 4.5” x 9.75”
Package dimensions: 7.25” x 7.25” x 12” - 11.75 lbs
The Essential Kits are designed to get you up and brewing with one click. It's highly recommended you add this to your cart with the purchase of a Brew Bucket Series.
Hose Barb | ½” 90° for Blow-Off
Tubing | ½” ID Silicone (2ft)
Tubing | ⅜” ID Silicone (5ft)
Hose Clamps (2)
The Ss Brite Tank is already an amazing piece of homebrewing equipment, and paired with a BrewMaster Upgrade Kit, you're one step closer to the ultimate home serving setup. This upgrade kit includes a TC Cap with stainless steel coil for cooling, and a thick Neoprene Jacket to keep the unit insulated! Combine with a Glycol Chiller for a stand alone home serving setup! Only works with 10 Gallon Brite Tank Features: 5 mm thick Neoprene Zippered Jacket Immersion Chiller coil mounted to 6" TC Cap Chiller Coil has 3/8" Hose barbs (matches up with FTSs system tubing!) Includes Hose Clamps. Pair with a Glycol / cooled liquid source, or click here for optional FTSs Temp Control Kit
A replacement gasket for the lids of Half Barrel Chronicals.
Features:
Brewer's Grade Silicone
Replacement part for Brew Buckets and Chronical Series Fermenters
The Kombucha Lid allows the user to convert any size Brew Bucket into a Kombucha Brewing vessel. The wide 6 inch TC port and screen allow the SCOBY to breathe, while also preventing any foreign material from entering the Brew Bucket.
The 3.5 Gallon lid is only compatible with the Brew Bucket Mini.
The 7 Gallon lid is compatible with both the 7gal Brew Bucket, 7gal Brew Bucket BME and 7gal Chronical 2.0 series. This includes the legacy 7gal Chronicals and 7gal Chronical BME.
The 14 Gallon lid is compatible with both the 14gal Brew Bucket, 17gal Chronical 2.0, as well as both the legacy Half BBL Chronical, and Half BBL Chronical BME tanks.
(Not compatible with the legacy Booch tanks or 14gal Chronical series.)
This is a 304 stainless steel blow off tube for Ss Brewtech 14 gallon Chronical fermenters. Fits perfectly on the 3" TC dome lids and comes with a built-in relief valve. The two-piece cane has an outer diameter of 15 mm (approx. 9/16") and 3/8" NPT where they connect. 3" TC gasket and clamp not included.
Designed specially for the Ss Grain Mill. The top plate has precision machined mounting holes as well as a grain chute port. The removable bottom plate is designed to easily align a standard five-gallon bucket commonly used in grain transfer for home and nano breweries. Ss Grain Mill NOT included 304 stainless steel Approximately 20" x 20" x 17" Only compatible with the updated HD Casters. Not compatible with Standard length Casters.
Chill your beer in the summer and warm your beer in the winter! Use a chill water source when it's hot or warmed water if it's cold! Temperature control during fermentation is one of the most significant contributors to the flavor of our beers, yet it all too often gets overlooked. This particular unit is designed to work specifically with the Brew Bucket Mini.
Brewers typically have limited the styles of beers they produce to the varying temperatures of the seasons. The system is elegant and engineered, yet it stays true to the heart and soul of us home brewers. The FTSs uses a precision digital temperature controller in combination with a 304 stainless steel immersion chiller. The digital controller constantly monitors your beer’s temperature and will activate the circulation pump (which, by the way, is quieter than a mouse) to hold the fermentation temperature at your predetermined set point. You can crash cool or lager too! You supply the chill water source, which can be as simple as ice water in a cooler or as involved as glycol from a chiller’s reservoir. We supply the rest of the system. As long time fellow home brewers, this is a system we know many of you have been dreaming about for a long time: advanced temperature control for the beers you make at an affordable price.
Features:
Custom lid w/ 304 Ss immersion chiller coil
Pro grade (super quiet) submersible pump
110-240V power supply
304 Ss weldless lid mounted thermowell
Tailored neoprene insulation jacket
Digital temperature controller
This is a 304 stainless steel blow off tube for Ss Brewtech 1/2 barrel Chronical fermenters. Fits perfectly on the 3" TC dome lids and comes with a relief valve built into the cane. 3" TC gasket and clamp not included.
These chiller coil extensions extend the length of the Ss Brewtech FTSs chiller coil for 14 gallon and half barrel Chronical fermenters. Very useful if you brew partial batches and/or there is a cool ambient temperature forcing you to mostly heat your fermenter. Mounts under the lid to drop the coils further down. Made from 304 stainless steel and leak tested.
Mount your FTSs control unit to the thermowell port of your SS Brewmaster Edition Chronical or Standard Brite Tank!
Features:
Matte Black painted stainless
Mounts on thermowell port
Custom built to fit FTSs digital controllers
Set a temperature on the controller, provide a source of chill water for your system, tuck the heater pad underneath the neoprene jacket, plug into the wall and walk away. This system will hold your set temp both when it gets cold and when it gets warm!
This kit is for owners of the Ss standard edition Chronical 14 Gallon fermenter that are looking for a two-way switchable controller with both heating and chilling functionality.
Kit contents include:
1x heater pad for 14 Gal Chronical
1 x power supply 110-240V and 6A power supply for global use
1 x two-way switchable FTSs controller
1 x flat FTSs lid
1 x chilling coil
1 x lid mounted thermowell
10 feet of vinyl tubing
1 x lid stopper
1 x submersible pump
1 x custom tailored neoprene jacket for Chronical 14 gallon fermenter
Digital temp controller displays both C/F
Chill from 0.5-2 degrees F per minute
Custom lid with 304 Ss immersion chiller coil
304 Ss weldless lid mounted thermowell
Accurately monitor and control temps
Chill your beer in the summer and warm your beer in the winter! Temperature control during fermentation is one of the keys to making world class beer at home. It can be difficult to achieve however, often requiring you to have a temperature controlled refrigerator dedicated to fermentation. Now with the FTSs temperature control package and either a Brew Bucket or Chronical, you can maintain perfect fermenting temps all year. This particular unit is designed to work specifically with the 14 gallon Brewmaster Edition Brew Bucket.
The system is elegant and engineered to be as compact and affordable as possible. The FTSs uses a precision digital temperature controller in combination with a 304 stainless steel immersion chiller. The digital controller constantly monitors your beer’s temperature and will activate the very quiet circulation pump to hold the fermentation temperature at your predetermined set point. You can cold crash or lager too! You supply the chill water source, which can be as simple as ice water in a cooler or as involved as glycol from a chiller’s reservoir. We supply the rest of the system. As long time fellow home brewers, this is a system we know many of you have been dreaming about for a long time: advanced temperature control for the beers you make at an affordable price.
Components:
Custom lid w/ 304 SS immersion chiller coil
Pro grade (super quiet) submersible pump
110-240 v power supply
304 SS weldless lid mounted thermowell
Tailored neoprene insulation jacket
Digital temperature controller
Included vinyl tubing
Required from you:
Any type of cooler where you will add water and ice, or frozen jugs, to cool. You will submerse the included pump in the water.
To heat you can use a simple aquarium heater to raise the temperature of the water in the cooler
A 14 gallon Brewmaster Edition Brew Bucket, FE804
Please Note: This Product is an add on for a 14 gallon Brewmaster Brew Bucket, and DOES NOT INCLUDE the brew bucket itself.
Replacement silicone feet for your Chronical Conical. A must have to keep your stainless steel fermenter level when the original feet get lost or damaged. Pack of 3.
Another great invention coming out of Ss Brewtech, the Keg WaSsher! This is a hands free, clean in place keg washer that will make cleaning kegs one of the easiest steps of the brewing process. Gone are the days of disassembling your keg to clean it.
The cleaning process is pretty simple. Just take the keg lid off, attach the keg washer, attach both ball lock QDs, stick the whole thing upside down in a bucket full of sanitizer, turn on the pump and your keg is clean.
The Keg WaSsher is designed to fit in a standard 5 gallon bucket. It also only uses 2 gallons of cleaning solution resulting in less chemical waste and evironmental impact. If you want to get fancy, you can set up a wash station with 3 buckets to perform an initial cleaning, fresh water rinse, and sanitizer. All you have to do is lift the whole apparatus from one bucket to the next!
Features:
Hands free operation
Chemical resistant submersible pump
Attaches to common ball-lock Cornelius-style kegs w/ removable lids
Powerful CIP spray ball
Entire assembly fits in 5-gallon bucket
Cleans inside of keg and ports simultaneously
Easily attaches/detaches from kegs
Perform clean, rinse, and sanitize steps all with the same unit
A properly controlled fermentation temperature is critical to producing quality beer. The now-iconic original Fermentation Temperature Stabilization System (FTSs) resulted from many napkin sketches that applied advanced thermodynamics to traditional brewing practices. The system is elegant in its simplicity and incredibly efficient, yet it was the third product we ever designed at Ss Brewtech, just after the Brew Bucket and Chronical. For an encore performance to the classic FTSs, we wanted to reimagine what homebrewing temperature control could be.
Your chill source can be as simple as a cooler with ice or as sophisticated as the Ss Glycol Chiller. If your setup requires temperatures to be corrected both up and down, check out the optional FTSs Touch | Heating Pad.
The FTSs Touch is designed to be paired with systems like the Unitank, Chronical BME, and Brite Tank BME, which already have a cooling coil and neoprene jacket.
What's Included:
FTSs Touch Display
FTSs Nub (junction box)
FTSs Pump
Digital Thermoprobe
3/8" Silicone Tubing
FTSs Pump Ice Guard
Silicone Thermoprobe Holder
Stand Mount
TC Mount
Cable/Tubing Management Ties
Hose Clamps
Power Supply
This Ss Brewtech fitting helps with recirculation in your mash tun. It has a 1/2" FPT on the mash tun side, a 1/2" MPT on the opposite side, and a 1/2" hose barb on the bottom of the tee. Made with 304 stainless steel.
Chill your beer in the summer and warm your beer in the winter! Use a chill water source when it's hot or warmed water if it's cold! Temperature control during fermentation is one of the most significant contributors to the flavor of our beers, yet it all too often gets overlooked. This particular unit is designed to work specifically with the 14 Gallon Chronical Fermentor.
Brewers typically have limited the styles of beers they produce to the varying temperatures of the seasons. The system is elegant and engineered, yet it stays true to the heart and soul of us home brewers. The FTSs uses a precision digital temperature controller in combination with a 304 stainless steel immersion chiller. The digital controller constantly monitors your beer’s temperature and will activate the circulation pump (which, by the way, is quieter than a mouse) to hold the fermentation temperature at your predetermined set point. You can crash cool or lager too! You supply the chill water source, which can be as simple as ice water in a cooler or as involved as glycol from a chiller’s reservoir. We supply the rest of the system. As long time fellow home brewers, this is a system we know many of you have been dreaming about for a long time: advanced temperature control for the beers you make at an affordable price.
Features:
Custom lid w/ 304 Ss immersion chiller coil
Pro grade (super quiet) submersible pump
110-240V power supply
304 Ss weldless lid mounted thermowell
Tailored neoprene insulation jacket
Digital temperature controller
The Essential Kits are designed to get you up and brewing with one click. It's highly recommended you add this to your cart with your purchase of an InfuSsion Mash Tun.
TC Kit Includes:
Hose Barb | 1/2" Barb to 1.5"TC
Tubing | ½” ID Silicone (5ft)
1.5" TC Clamp
Hose Clamps (2)
Set a temperature on the controller, provide a source of chill water for your system, tuck the heater pad underneath the neoprene jacket, plug into the wall and walk away. This system will hold your set temp both when it gets cold and when it gets warm!
This kit is for owners of the Ss standard edition Chronical Half Barrel fermenter that are looking for a two-way switchable controller with both heating and chilling functionality.
Kit contents include:
1x heater pad for Half BBL Chronical
1 x power supply 110-240V and 6A power supply for global use
1 x two-way switchable FTSs controller
1 x flat FTSs lid
1 x chilling coil
1 x lid mounted thermowell
10 feet of vinyl tubing
1 x lid stopper
1 x submersible pump
1 x custom tailored neoprene jacket for Chronical Half BBL fermenter
Digital temp controller displays both C/F
Chill from 0.5-2 degrees F per minute
Custom lid with 304 Ss immersion chiller coil
304 Ss weldless lid mounted thermowell
Accurately monitor and control temps
This is a dome lid for Ss Brewtech 1/2 bbl Chronicals. It features a 3" tri clamp opening at the top to facilitate dry hopping or cleaning your fermenter in place. Made from 304 stainless steel. Does not include 3" TC gasket and clamp.
This is a dome lid for Ss Brewtech 14 gal Chronicals. It features a 3" tri clamp opening at the top to facilitate dry hopping or cleaning your fermenter in place. Made from 304 stainless steel. Does not include 3" TC gasket and clamp.
Pro-style blow-off to replace commonly used airlocks and silicone tubing. Sized for the 1 BBL Chronical BME.
304 Stainless steel
Direct fit for Chronical 2.0 and legacy Chronical BME
Can work on other fermenters with the addition of a 3" TC Domed Lid
Pressure relief valve included
3" TC Gasket and 3" TC Clamp not included
*The 7 gal version is a single piece. 14 gal, 17 gal, and 1BBL versions are two-piece designs.
The wide 6" TC mesh screen attaches to a 6" TC port to allow the SCOBY to breathe, while also preventing any foreign material from entering the Brew Bucket.
Attaches to a 6" TC port. Compatible with the Kombucha Lid and the legacy Booch Tanks.
Sold Individually.
Designed to be used as a whirlpool solution in TC Brew Kettles (including the eKettle).
1/2" NPT to 1.5" TC 3 Piece Ball Valve
1/2" ID Valve Body
Integrated Whirlpool Nozzle
Compatible with Ss TC Brew Kettle and eKettles
304 Stainless Steel
Does not include TC Clamp or Gasket
Not intended for use with Ss Brew Kettle Brew Master Edition.
The Ss Glycol Chiller | 1/5 HP, will maintain lager temps and enable crash cooling for up to 3 vessels even in relatively high ambient temperatures. We designed the chiller to integrate seamlessly with our FTSs kits to provide a complete temperature control system.
Since each FTSs kit includes its own dedicated temperature controller, pump, and tubing, each vessel can be connected to the glycol chiller with its own independent loop. The parallel design of this setup offers the ability to ferment at ale temps in one vessel, and maintain precise serve or crash cooling temps in another vessel. The Glycol Chiller can also be paired with our line of Ss Brite Tanks to hold beer at serving temperatures. This system offers both flexibility and expandability for your home brewery.
Features:
Pumps not included, attach up to 3 FTSs Touch kits (sold separately)
Capable of crash cooling and lagering
Assuming one vessel is crash cooled at a time:
Chills Up to 2 - 1/2 bbl, 14 gal Chronicals, Unitanks, or Brew Buckets
Chills Up to 3 - 7 gal Chronicals, Unitanks, or 10 gal Brite Tanks
Chills Up to 3 - 7 or 3.5 gal Brew Buckets
Not Compatible with the FTSs Pro Series Controllers
Specs:
Vertical chassis layout
120 VAC 1/5 HP Compressor
1450 BTUs/Hr
4.75 Gallon Reservoir with Pressure Vent
R290 Refrigerant
Casters Included
Made in France
Dimensions: 14" W x 11" D x 27.5" H
The Essential Kits are designed to get you up and brewing with one click. It's highly recommended you add this to your cart with your purchase of a Unitank or Unitank 2.0.
Kit Includes:
Hose Barb | 1/2" to 1.5" TC
Hose Barb | 1" to 1.5" TC
Hose Barb | 1/2" Barb to 1/2" MPT
Clamp | 1.5" TC clamp (2)
Gasket | 1.5" TC gasket (3)
Tubing | 1" ID Silicone (2ft)
Tubing | ½” ID Silicone (7ft)
Hose Clamps (2)
Compatible with Unitank 2.0, Unitank, Nano Jacketed Unitank
The Brew Cubes started as a side project for the Engineering team. We wanted a modular system for testing and prototyping. The Brew Cubes gained popularity internally, and we decided we had to make them available to homebrewers.
19.75" x 19.75" x 17"
Modular Design
The Brew Cubes started as a side project for the engineering team. We needed a modular system for testing and prototyping a variety of homebrew equipment configurations without fabricating custom brew stands for each build. They quickly gained popularity internally for their modularity and flexibility.
The Brew Cubes are designed to grow alongside the brewer's equipment needs and skill level; there's really no right or wrong way to build a brewery, and that's where the modular design of the Brew Cubes shines.
The core of the Brew Cube is the base kit, as shown in the exploded view. From there, any variety of shelves and accessories can be added on. We'll have many of the core accessories available immediately, but we view this as a long term platform and intend to introduce thoughtful additions to the product line over the coming months and years.
Unlimited Flexibility
From stands and carts to parts racks and shelves, flexibility is at the heart of the Brew Cube's design. Every brewer and brewery has different needs, that's why there's no right or wrong way to use Brew Cubes. Designed to bolt together, it's easy to string three or more cubes next to each other, or add optional shelving, leg extensions, and peg walls for near-endless customization.
Pro Inspiration for the Home Brewer
When designing the perfect homebrew rig, we took inspiration from some of the best and most sought after pro features our team has been engineering into our larger brewhouses. From the dual pump architecture to the newly patented valve tree, Brew Cubes can unlock the full potential of your Ss Brewtech equipment.
3V eBrewing setup shown in example photo:
(3) Brew Cubes
(2) Brew Cube | Connection Bolts
Brew Cube | Valve Tree
3V eController with Brew Cube eController Mount
(2) eKettles
InfuSsion Mash Tun
RIMS
(2) TC Pumps
Various hose barbs, valves, silicone tubing, and fittings
The Essential Kits are designed to get you up and brewing with one click. It's highly recommended you add this to your cart with your purchase a TC Kettle.
Designed to work perfectly with TC Ss Kettle including the Brewmaster Editions.
Kit Includes:
Thermometer | 1.5" TC
Hose Barb | 1/2" Barb to 1/2" MPT
Tubing | ½” ID Silicone (5ft)
Hose Clamps (2)
This handle is a removable upgrade for the Ss Brite Tanks. It slides onto the TC Flange, allowing for easier lifting with the silicone covered handles. Thick 2 mm SS constuction holds your beer sturdy during movement!
Works with older threaded coil kits like FTSs | Brew Bucket and FTSs | Chronical. Not compatible with TC lid coils like the Chilling Coil Kit or Chronical 2.0. Extends the lid-mounted FTSs coil into the fermenter which allows for partial batch brews.
304 Stainless Steel
Long Extensions: 24 cm total length
Partial Batch Sizes:
14 gal Chronical = 5 gal batch
Half bbl Chronical = 7 gal batch
Weldless Pressure Relief Valve for Chronical series fermenters. This is a standard replacement for the 1/2 barrel Chronical but can also be retrofitted to work on the 7 gallon Chronical fermenter. The unit releases between 5-6 psi.
Designed to fit in between legs or between feet (or casters) as a shelf on Brew Cubes.
Perforated Shelf can be used to mount pumps and accessories.
*Note these will not work as top plates.
