Ss Brewing Technologies

Compact design 304 Stainless Steel 3 x 1.5" TC flanges, 19mm ID TC Gaskets not included TC Clamps not included Compatible with new Ss Carb Stone

Read more less

Neoprene jacket for legacy Ss Chronical 14 gallon fermenters. This jacket is not compatible with the Chronical 2.0.

Read more less

Ss Brewtech Brew Bucket Mini replacement lid. Comes with a gasket and 17mm punched hole for an airlock or tubing. Made from 304 stainless steel.

Read more less

Chill your beer in the summer and warm your beer in the winter! Use a chill water source when it's hot or warmed water if it's cold! Temperature control during fermentation is one of the most significant contributors to the flavor of our beers, yet it all too often gets overlooked. This particular unit is designed to work specifically with the 14 Gallon Chronical Fermentor. Brewers typically have limited the styles of beers they produce to the varying temperatures of the seasons. The system is elegant and engineered, yet it stays true to the heart and soul of us home brewers. The FTSs uses a precision digital temperature controller in combination with a 304 stainless steel immersion chiller. The digital controller constantly monitors your beer’s temperature and will activate the circulation pump (which, by the way, is quieter than a mouse) to hold the fermentation temperature at your predetermined set point. You can crash cool or lager too! You supply the chill water source, which can be as simple as ice water in a cooler or as involved as glycol from a chiller’s reservoir. We supply the rest of the system. As long time fellow home brewers, this is a system we know many of you have been dreaming about for a long time: advanced temperature control for the beers you make at an affordable price. Features: Custom lid w/ 304 Ss immersion chiller coil Pro grade (super quiet) submersible pump 110-240V power supply 304 Ss weldless lid mounted thermowell Tailored neoprene insulation jacket Digital temperature controller

Read more less

This Ss Brewtech fitting helps with recirculation in your mash tun. It has a 1/2" FPT on the mash tun side, a 1/2" MPT on the opposite side, and a 1/2" hose barb on the bottom of the tee. Made with 304 stainless steel.

Read more less

Set a temperature on the controller, provide a source of chill water for your system, tuck the heater pad underneath the neoprene jacket, plug into the wall and walk away.  This system will hold your set temp both when it gets cold and when it gets warm!   This kit is for owners of the Ss standard edition Chronical Half Barrel fermenter that are looking for a two-way switchable controller with both heating and chilling functionality.  Kit contents include: 1x heater pad for Half BBL Chronical  1 x power supply 110-240V and 6A power supply for global use 1 x two-way switchable FTSs controller  1 x flat FTSs lid  1 x chilling coil  1 x lid mounted thermowell  10 feet of vinyl tubing  1 x lid stopper  1 x submersible pump  1 x custom tailored neoprene jacket for Chronical Half BBL fermenter Digital temp controller displays both C/F Chill from 0.5-2 degrees F per minute Custom lid with 304 Ss immersion chiller coil 304 Ss weldless lid mounted thermowell Accurately monitor and control temps

Read more less

This is a dome lid for Ss Brewtech 1/2 bbl Chronicals. It features a 3" tri clamp opening at the top to facilitate dry hopping or cleaning your fermenter in place. Made from 304 stainless steel. Does not include 3" TC gasket and clamp.

Read more less

Pro-style blow-off to replace commonly used airlocks and silicone tubing. Sized for the 1 BBL Chronical BME. 304 Stainless steel Direct fit for Chronical 2.0 and legacy Chronical BME Can work on other fermenters with the addition of a 3" TC Domed Lid Pressure relief valve included 3" TC Gasket and 3" TC Clamp not included *The 7 gal version is a single piece. 14 gal, 17 gal, and 1BBL versions are two-piece designs.

Read more less

This is a dome lid for Ss Brewtech 14 gal Chronicals. It features a 3" tri clamp opening at the top to facilitate dry hopping or cleaning your fermenter in place. Made from 304 stainless steel. Does not include 3" TC gasket and clamp.

Read more less

A properly controlled fermentation temperature is critical to producing quality beer. The now-iconic original Fermentation Temperature Stabilization System (FTSs) resulted from many napkin sketches that applied advanced thermodynamics to traditional brewing practices. The system is elegant in its simplicity and incredibly efficient, yet it was the third product we ever designed at Ss Brewtech, just after the Brew Bucket and Chronical. For an encore performance to the classic FTSs, we wanted to reimagine what homebrewing temperature control could be. Your chill source can be as simple as a cooler with ice or as sophisticated as the Ss Glycol Chiller. If your setup requires temperatures to be corrected both up and down, check out the optional FTSs Touch | Heating Pad. The FTSs Touch is designed to be paired with systems like the Unitank, Chronical BME, and Brite Tank BME, which already have a cooling coil and neoprene jacket. What's Included: FTSs Touch Display FTSs Nub (junction box) FTSs Pump Digital Thermoprobe 3/8" Silicone Tubing FTSs Pump Ice Guard  Silicone Thermoprobe Holder Stand Mount TC Mount Cable/Tubing Management Ties Hose Clamps Power Supply

Read more less

The Essential Kits are designed to get you up and brewing with one click.  It's highly recommended you add this to your cart with your purchase of an InfuSsion Mash Tun. TC Kit Includes: Hose Barb | 1/2" Barb to 1.5"TC Tubing | ½” ID Silicone (5ft) 1.5" TC Clamp  Hose Clamps (2)

Read more less

Features: 304 Stainless Steel Compatible with 1/4" probes Does not include TC gasket 2.75" Thermowell

Read more less

Adjustable feet for Ss Brewtech chronicals. 3/8" threaded and comes in a set of 4. Does not work with standard 7 gal Chronical.

Read more less

The Essential Kits are designed to get you up and brewing with one click.  It's highly recommended you add this to your cart with your purchase of a Unitank or Unitank 2.0. Kit Includes: Hose Barb | 1/2" to 1.5" TC Hose Barb | 1" to 1.5" TC Hose Barb | 1/2" Barb to 1/2" MPT Clamp | 1.5" TC clamp (2) Gasket | 1.5" TC gasket (3) Tubing | 1" ID Silicone (2ft) Tubing | ½” ID Silicone (7ft) Hose Clamps (2) Compatible with Unitank 2.0, Unitank, Nano Jacketed Unitank

Read more less

Designed to be used as a whirlpool solution in TC Brew Kettles (including the eKettle).  1/2" NPT to 1.5" TC 3 Piece Ball Valve 1/2" ID Valve Body Integrated Whirlpool Nozzle Compatible with Ss TC Brew Kettle and eKettles 304 Stainless Steel Does not include TC Clamp or Gasket Not intended for use with Ss Brew Kettle Brew Master Edition.

Read more less

Racking Arm Replacement  Item(s) Included (1) Racking Arm Replacement (2) Replacement  set of O-rings included 

Read more less

Works with older threaded coil kits like FTSs | Brew Bucket and FTSs | Chronical. Not compatible with TC lid coils like the Chilling Coil Kit or Chronical 2.0. Extends the lid-mounted FTSs coil into the fermenter which allows for partial batch brews. 304 Stainless Steel Long Extensions: 24 cm total length Partial Batch Sizes: 14 gal Chronical = 5 gal batch Half bbl Chronical = 7 gal batch  

Read more less

Replacement mat for eKettle Contoured to match the eKettle's footprint Black silicone construction Durable and easy to clean Prevents heat damage to brewing surfaces Prevents scratches from forming on the underside of the eKettle Reduces risk of burns when brewing on heat-conductive surfaces Included with eKettle purchase

Read more less

The Brew Cubes started as a side project for the Engineering team. We wanted a modular system for testing and prototyping. The Brew Cubes gained popularity internally, and we decided we had to make them available to homebrewers. 19.75" x 19.75" x 17" Modular Design The Brew Cubes started as a side project for the engineering team. We needed a modular system for testing and prototyping a variety of homebrew equipment configurations without fabricating custom brew stands for each build. They quickly gained popularity internally for their modularity and flexibility. The Brew Cubes are designed to grow alongside the brewer's equipment needs and skill level; there's really no right or wrong way to build a brewery, and that's where the modular design of the Brew Cubes shines. The core of the Brew Cube is the base kit, as shown in the exploded view. From there, any variety of shelves and accessories can be added on. We'll have many of the core accessories available immediately, but we view this as a long term platform and intend to introduce thoughtful additions to the product line over the coming months and years. Unlimited Flexibility From stands and carts to parts racks and shelves, flexibility is at the heart of the Brew Cube's design. Every brewer and brewery has different needs, that's why there's no right or wrong way to use Brew Cubes. Designed to bolt together, it's easy to string three or more cubes next to each other, or add optional shelving, leg extensions, and peg walls for near-endless customization. Pro Inspiration for the Home Brewer When designing the perfect homebrew rig, we took inspiration from some of the best and most sought after pro features our team has been engineering into our larger brewhouses. From the dual pump architecture to the newly patented valve tree, Brew Cubes can unlock the full potential of your Ss Brewtech equipment. 3V eBrewing setup shown in example photo: (3) Brew Cubes (2) Brew Cube | Connection Bolts Brew Cube | Valve Tree 3V eController with Brew Cube eController Mount (2) eKettles InfuSsion Mash Tun RIMS (2) TC Pumps Various hose barbs, valves, silicone tubing, and fittings

Read more less

Replacement silicone base for the Brew Bucket Mini Fermenter

Read more less

This handle is a removable upgrade for the Ss Brite Tanks.  It slides onto the TC Flange, allowing for easier lifting with the silicone covered handles.  Thick 2 mm SS constuction holds your beer sturdy during movement!

Read more less

Introducing the Ss Glycol Chiller 3/8 HP, which will maintain lager temps and enable crash cooling for up to 6 vessels even in relatively high ambient temperatures. We designed the chiller to integrate seamlessly with our FTSs kits to provide a complete temperature control system. Since each FTSs kit includes its own dedicated temperature controller, pump, and tubing, each vessel can be connected to the glycol chiller with its own independent loop. The parallel design of this set up offers the ability to ferment at ale temps in one vessel, and maintain precise serve or crash cooling temps in another vessel. The Glycol Chiller can also be paired with our line of Ss Brite Tanks to hold beer at serving temperatures. This system offers both flexibility and expandability for your home brewery.  Features: Pumps not included, attach up to 6 FTSs Touch kits (sold separately) Capable of crash cooling and lagering Assuming one vessel is crash cooled at a time: Chills Up to 4 - 1 BBL Chronicals, Unitanks or Brite Tanks Chills Up to 6 - 1/2 BBL, 14, or 7 gal Chronicals or Unitanks, 10 or 20 gal Brite Tanks Chills up to 6 - 14 or 7 gal Brew Buckets  Not Compatible with the FTSs Pro Series Controllers Specs: Vertical chassis layout 120 VAC 3/8 HP Compressor 3576 BTUs/Hr 10 Gallon Reservoir with Pressure Vent R290 Refrigerant Casters included Made in France Dimensions: 18" W x 18" D x 28" H  

Read more less

The Ss Glycol Chiller | 1/5 HP, will maintain lager temps and enable crash cooling for up to 3 vessels even in relatively high ambient temperatures. We designed the chiller to integrate seamlessly with our FTSs kits to provide a complete temperature control system. Since each FTSs kit includes its own dedicated temperature controller, pump, and tubing, each vessel can be connected to the glycol chiller with its own independent loop. The parallel design of this setup offers the ability to ferment at ale temps in one vessel, and maintain precise serve or crash cooling temps in another vessel. The Glycol Chiller can also be paired with our line of Ss Brite Tanks to hold beer at serving temperatures. This system offers both flexibility and expandability for your home brewery.  Features:  Pumps not included, attach up to 3 FTSs Touch kits (sold separately) Capable of crash cooling and lagering Assuming one vessel is crash cooled at a time: Chills Up to 2 - 1/2 bbl, 14 gal Chronicals, Unitanks, or Brew Buckets Chills Up to 3 - 7 gal Chronicals, Unitanks, or 10 gal Brite Tanks Chills Up to 3 - 7 or 3.5 gal Brew Buckets Not Compatible with the FTSs Pro Series Controllers Specs: Vertical chassis layout 120 VAC 1/5 HP Compressor 1450 BTUs/Hr 4.75 Gallon Reservoir with Pressure Vent R290 Refrigerant Casters Included Made in France Dimensions: 14" W x 11" D x 27.5" H  

Read more less

The Essential Kits are designed to get you up and brewing with one click.  It's highly recommended you add this to your cart with your purchase a TC Kettle. Designed to work perfectly with TC Ss Kettle including the Brewmaster Editions. Kit Includes: Thermometer | 1.5" TC Hose Barb | 1/2" Barb to 1/2" MPT Tubing | ½” ID Silicone (5ft) Hose Clamps (2)

Read more less

Weldless Pressure Relief Valve for Chronical series fermenters. This is a standard replacement for the 1/2 barrel Chronical but can also be retrofitted to work on the 7 gallon Chronical fermenter. The unit releases between 5-6 psi.

Read more less

The wide 6" TC mesh screen attaches to a 6" TC port to allow the SCOBY to breathe, while also preventing any foreign material from entering the Brew Bucket. Attaches to a 6" TC port. Compatible with the Kombucha Lid and the legacy Booch Tanks. Sold Individually.

Read more less

Designed to fit in between legs or between feet (or casters) as a shelf on Brew Cubes. Perforated Shelf can be used to mount pumps and accessories. *Note these will not work as top plates.

Read more less

Designed to extend an eController further alway from an eKettle. Very useful in three vessel setups. Two lengths available. L6-30 Power Plug  10 Gauge SJOOW Power Cable Temp Prob Harness

Read more less

Pack of six bolts to connect two brew cubes together.

Read more less

Inspired by the patented valve trees on every Ss Brewtech Pro Brewhouse. The Portable Valve Tree makes it easy to transfer your brews in and out of your brew vessels without needing to constantly disconnect and reconnect your pump. Pre-drilled holes in the base plate allow Chugger TC Stainless Head Pumps to be installed with ease. Taking samples is critical during a brew day, so just like the Pro Brewhouses, the Portable Valve Tree includes a sample valve. The Pure Flow Sample Valve, pulled from the Chronical 2.0, is the perfect pairing. Kit includes: Valve Tree Assembly (8) 1.5" TC Clamps (8) 1.5" TC Gaskets (1) 1.5" TC Offset Tee (1) ¾” TC Sample Valve (1) ¾” TC Clamp Pump Mounting Hardware *Note that the valve tree is designed to work with nearly any 1.5" TC valves and thus does not include valves. Additional needed parts: 1.5" TC valves and Chugger TC Head Pump  

Read more less

The Essential Kits are designed to get you up and brewing with one click.  It's highly recommended you add this to your cart with the purchase of a Chronical 2.0. Also works with legacy Chronical Brew Master Edition Kit Includes: Hose Barb | 1/2" to 1.5" TC Hose Barb | 1" to 1.5" TC Clamp | 1.5" TC clamp (2) Gasket | 1.5" TC gasket (3) Tubing | 1" ID Silicone (2ft) Tubing | ½” ID Silicone (10ft) Hose Clamps (2)

Read more less

Due to the integrated PT100 thermo probe, our RIMS units are only compatible with Ss Brewtech eControllers Our Recirculating InfuSsion Mash System (RIMS) features a 3500w Incoloy 800 helical element with a thermoprobe integrated into the base which is designed to read wort temperature as it leaves the RIMS housing.  When used with an InfuSsion Mash Tun, the system is designed to provide the brewer the temperature gradient between mash and recirculating wort, allowing the perfect pump speed to be dialed in.   The RIMs kit includes a fully welded housing with TC connections, silicone base, and neoprene insulating jacket.  For stabilization and control in a multi-step mash process there is simply not a better system on the market.   Connectivity was an important consideration for our eBrewing Systems, we wanted the flexibility and familiarity of a plug that could be adapted to an existing customer setup, and the reliability of a UL approved connector type.  For the 240VAC element connector, we settled on the common NEMA L6-30 standard, which is a 3-wire twist-lock plug type, capable of delivering 30 amps of current.  Finally, for the PT100 temperature probes we opted for the 3.5 mm mini jack connector standard, commonly used for headphones, which is both durable and easy to use. 3500w Incoloy 800 Helical Element w/ integrated thermoprobe Sanitary TC Connections Neoprene Insulation Jacket NEMA L6-30 Plug 240VAC

Read more less

Designed to mount an eController to a Brew Cube. Additionally, the Side Shelf which measures 270mm x 270mm can be use to hold a RIMS or other accessory. Please select your controller size as the mounting plates are different widths. *3V Mount shown in photo

Read more less

The Brew Cube | Hose Hanger is designed to be mounted to the side of a Brew Cube and used to hang hoses and other accessories from the Brew Cube. Includes mounting hardware. The Garden Hose Hanger can be used to coil up a garden-style hose for easy brew day access. The U-Hook Hose Hanger can be used to rest accessories like tubing, mash paddles, and gloves.

Read more less

Designed to allow the use of older FTSs pumps and heaters with new FTSs Touch controller.

Read more less

The Essential Kits are designed to get you up and brewing with one click.  It's highly recommended you add this to your cart with your purchase of a pump. TC PUMP KIT: TC Ball Valve Hose Barb | 1/2" to 1.5" TC Hose Barb | 1/2" Barb to 1/2" MPT Clamp | 1.5" TC clamp (2) Gasket | 1.5" TC gasket (3) Tubing | ½” ID Silicone (10ft) Hose Clamps (2) THREADED PUMP KIT: 1/2" Threaded Ball Valve Hose Barb | 1/2" Barb to 1/2" MPT Hose Barb | 1/2" to 1/2" FPT Tubing | ½” ID Silicone (10ft)

Read more less