The Ss Brewtech Whirlpool fitting attaches to the thermometer port, the recirculation port, or another 7/8" hole. Creates a nice whirlpool action that works perfectly with a trub dam to keep out most of the hop matter and other solids from your fermenter. Made from 304 stainless steel. The whirlpool fitting has a 1/2" MPT and comes with 1" x 1/2" bulkhead. Please note this product is intended to be used with a 1/2" FPT ball valve (BE382) on the outside of the kettle. Please see the Whirlpool Fitting Quick Reference Guide below for installation and operation instructions.
1.5 in. TC sample valve from Ss Brewtech. Uses lever operation and easily disassembles for cleaning.
Features:
Made from 304 stainless steel
Knob/Bonnet operation
Completely sanitary with silicone seal
Easy disassembly for cleaning
Compatible with most sampling coils
Another high quality intuitive piece of brewing gear from Ss BrewTech, the Ssparge Arm! Simple design, with adjustable height and flow rate, this is a necessary add on for the Ss InfuSsion Mash Tuns.
Incredibly easy to use: Simply choose and thread on a flow rate disk, clip the unit to your mash tun, set the height just above your grain bed, and get brewing!! See the Documents tab above for a more detailed guide to use.
For USE ONLY ON Ss MASH TUNS (10/20 gal)
304 Stainless Steel construction
Designed for gravity feed from HLT
Or hook your own pump / flow control valve
3/8” diameter stainless tubing
3/8" barb on inlet of tubing
Custom silicone handle mount for Ss Mash Tun
Easily adjust height of sparge head up / down
Uniform liquid dispersion fom sparge head
Ss BrewTech's T.C. brewing kettle is made from quality 304 stainless steel and can last you a lifetime of home brewing. This high-quality boil kettle features an aluminum core Tri-Clad bottom to foster even heating and minimize the risk of scorching and allow for the use of induction heating. Tri-Clamp ports have long been the standard in professional brewing, and for a good reason, they're quick, sturdy, and sanitary. The Ss T.C. Brew Kettle now brings this pro-level feature to the home brewer in an affordable package.
The sturdy riveted silicone-coated handles are located on the front and back for easy moving and dumping of the kettle while also allowing for tighter brew stand setup. Just like the original Ss Brew Kettle, the T.C. version features an integrated trub dam into the dip tube to minimize the pickup of trub and hop material during knockout. The result is much clearer wort making its way into your fermenter.
Features:
Tri-Clad bottom
Sanitary TC Ports
Sturdy riveted silicone coated handles
3-piece TC ball valve with trub dam pick-up tube
Lid designed to hang on side of handles
Etched volume markings gals/liters
Induction burner compatible
Included Hardware:
(2) TC Clamps
(2) Silicone Clamp Gaskets
3-piece TC Ball Valve
Dip Tube w/ Trub Dam
Silicone Trub Dam Blade
TC Port Plug
Specs:
Size
Capacity
Diameter
Height
10 gal
10.7 gal
13.8"
16.5"
15 gal
15.7 gal
15.8"
18.9"
20 gal
22.7 gal
17.7"
21.3"
30 gal
31.1 gal
19.7"
23.7"
50 gal
53.0 gal
23.6"
28.3"
Lowest Price Guarantee, this item has MAP pricing so you can be confident you won't find it for less.
Another great addition to your Ss Brewtech Chronical fermenter. This shelf adds stability to your Chronical, especially when using leg extensions, and gives you a handy place to set things like your blow off vessel.
NOT FOR LEGACY 7 GAL CHRONICAL - There are no threaded inserts in the leg bottoms for this to mount to on the 7 gal Legacy Chronical.
Features:
Made from 304 stainless steel
Great place to put your blow off vessel
Adds stability when using leg extensions
Lowest Price Guarantee, this item has MAP pricing so you can be confident you won't find it for less.
Give your Chronical insulation to help with maintaining fermentation temp and assist with cold crashing. Specifically sized for the 10-clamp version of the 1/2 bbl unit.
This is a 304 stainless steel blow off tube for Ss Brewtech 14 gallon Chronical fermenters. Fits perfectly on the 3" TC dome lids and comes with a built-in relief valve. The two-piece cane has an outer diameter of 15 mm (approx. 9/16") and 3/8" NPT where they connect. 3" TC gasket and clamp not included.
Set a temperature on the controller, provide a source of chill water for your system, tuck the heater pad underneath the neoprene jacket, plug into the wall and walk away. This system will hold your set temp both when it gets cold and when it gets warm!
This kit is for owners of the Ss standard edition Chronical 14 Gallon fermenter that are looking for a two-way switchable controller with both heating and chilling functionality.
Kit contents include:
1x heater pad for 14 Gal Chronical
1 x power supply 110-240V and 6A power supply for global use
1 x two-way switchable FTSs controller
1 x flat FTSs lid
1 x chilling coil
1 x lid mounted thermowell
10 feet of vinyl tubing
1 x lid stopper
1 x submersible pump
1 x custom tailored neoprene jacket for Chronical 14 gallon fermenter
Digital temp controller displays both C/F
Chill from 0.5-2 degrees F per minute
Custom lid with 304 Ss immersion chiller coil
304 Ss weldless lid mounted thermowell
Accurately monitor and control temps
Chill your beer in the summer and warm your beer in the winter! Use a chill water source when it's hot or warmed water if it's cold! Temperature control during fermentation is one of the most significant contributors to the flavor of our beers, yet it all too often gets overlooked. This particular unit is designed to work specifically with the 14 Gallon Chronical Fermentor.
Brewers typically have limited the styles of beers they produce to the varying temperatures of the seasons. The system is elegant and engineered, yet it stays true to the heart and soul of us home brewers. The FTSs uses a precision digital temperature controller in combination with a 304 stainless steel immersion chiller. The digital controller constantly monitors your beer’s temperature and will activate the circulation pump (which, by the way, is quieter than a mouse) to hold the fermentation temperature at your predetermined set point. You can crash cool or lager too! You supply the chill water source, which can be as simple as ice water in a cooler or as involved as glycol from a chiller’s reservoir. We supply the rest of the system. As long time fellow home brewers, this is a system we know many of you have been dreaming about for a long time: advanced temperature control for the beers you make at an affordable price.
Features:
Custom lid w/ 304 Ss immersion chiller coil
Pro grade (super quiet) submersible pump
110-240V power supply
304 Ss weldless lid mounted thermowell
Tailored neoprene insulation jacket
Digital temperature controller
Set a temperature on the controller, provide a source of chill water for your system, tuck the heater pad underneath the neoprene jacket, plug into the wall and walk away. This system will hold your set temp both when it gets cold and when it gets warm!
This kit is for owners of the Ss standard edition Chronical Half Barrel fermenter that are looking for a two-way switchable controller with both heating and chilling functionality.
Kit contents include:
1x heater pad for Half BBL Chronical
1 x power supply 110-240V and 6A power supply for global use
1 x two-way switchable FTSs controller
1 x flat FTSs lid
1 x chilling coil
1 x lid mounted thermowell
10 feet of vinyl tubing
1 x lid stopper
1 x submersible pump
1 x custom tailored neoprene jacket for Chronical Half BBL fermenter
Digital temp controller displays both C/F
Chill from 0.5-2 degrees F per minute
Custom lid with 304 Ss immersion chiller coil
304 Ss weldless lid mounted thermowell
Accurately monitor and control temps
Replacement pre-drilled FTSs lid. Included with the the Ss BrewTech FTSs chilling system for the 1/2 bbl Chronical.
Lid only. This does not include the other FTSs components.
This is a dome lid for Ss Brewtech 1/2 bbl Chronicals. It features a 3" tri clamp opening at the top to facilitate dry hopping or cleaning your fermenter in place. Made from 304 stainless steel. Does not include 3" TC gasket and clamp.
