Everything On Sale

An excellent, attractive upgrade to your Braumeister! This stainless steel domed hood helps trap heat to get your brew up to boiling faster, and promotes a more vigorous, rolling boil. The open top still allows for DMS to be blown off during the boil and can be connected to an exhaust pipe to carry steam out of your brew space. As an extra benefit, the dome can be fitted to the Braumeister upside down and used as a funnel to help when doughing in your malt. A real must-have! Compatible with all generations of Braumeister, made before or after 2015.

Read more less

Tired of using gravity or siphons to transfer wort from your Braumeister to your fermenter? This device uses the Braumeister's built in pump to move the wort, even if your Braumeister is below your fermenter! Features: Only works with 20 or 50 Liter Braumeisters Works with both standard and Braumeister Plus models Pumps wort to a fermenter even when placed higher than the Braumeister Includes stainless pipe, pump plug, valve, and about 5 ft. of silicone tubing

Read more less

Sample Valve for Speidel Tanks which are equipped with a DIN10 male threaded fitting in the tank wall. Tanks larger than 290L which we order for regular stock during wine season are equipped with a single DIN10 fitting, which comes capped. This fitting will accomodate either this Sample Valve or a DIN10 Thermowell. This item is not intended for use with tanks ordered as part of our PreSeason Sale. If you did not order a GERT or GERSV option then your tank does not have the required DIN10 male fitting on it. We cannot weld this fitting in to your tank wall. However, if you ordered the GERT on your PreSeason Tank then you can replace the Thermowell with this Sample Valve.

Read more less

Monitor and track your fermentation from your computer or phone with Speidel's new Garspundmobil. The monitor sits on your Speidel airlock and measures temperature and counts the number of bubbles coming from your fermentation. It uses this information to show you how active your fermentation is and estimate the gravity. Features: Measures fermentation activity by counting the number of bubbles passing through your airlock Measures temperature of your fermentation Sends this information to MySpeidel wirelessly Uses network standard: IEEE 802.11 b/g/n Device's status is shown through a light inside the unit USB cable included

Read more less

Replacement white rubber gasket for Speidel variable volume tank lids. What an upgrade to the traditional clear vinyl gaskets! Reduce issues with leakage, ensure a great seal, and reduce your worries about storing wine in a variable volume tank.These white, food-grade, rubber gaskets are formed like a channel as opposed to a circular tube to form a better seal against tank and lid. Nearly 3x as thick as the clear vinyl gaskets they also help to reduce oxidation. Hold one of these in your hand and you will instantly know from the hefty weight that this is a worthwhile upgrade for every variable volume tank owner who plans to store wine. 3/8" barb Unsure what size gasket you need? Please see the chart below for our most popular Speidel Variable Volume Tanks.   SKU Tank Volume Gasket Ø GER110VF 110L 44 cm GER220VF 220L 55 cm BO-063-0290 290L 63 cm GER290VF 290L 63 cm GER300V 300L 63 cm GER530V 530L 82 cm GER650VF 650L 82 cm GER675V 675L 82 cm GER1100V 1100L 100 cm GER2200VR 2200L 140 cm  

Read more less

Clean in place with this filling and cleaning lid for FD-Style Speidel Fermenters.  Just attach CIP Spray Ball (included) and pump hot water through to clean your fermenters.  Use to maximize aeration when transferring wort into your tank. Generally speaking this lid is pretty sweet! 1" MPT inlet w/ 1" Pipe

Read more less

Replacement bladder for Speidel Bladder Press. 20L -- GER101S 40L -- GER102S 90L -- GER104 / GER104S 180L -- GER106 Please Note: The bladder may arrive covered in white dust from the manufacturing process. This is normal and does not indicate the bladder was used. Simply wash the bladder with water to remove the dust before first use. This product was specifically developed to be used only as intended by the manufacturer and we cannot advise its use in any other application as it may cause damage or harm.

Read more less

Replacement Inner Nylon Sack for Speidel Bladder Press. This nylon sack fits just inside the Stainless pressing screen prior to loading the press and provides a quick and easy way to manage the pressed pommace. 20L -- GER101S 40L -- GER102S 90L -- GER104 / GER104S 180L -- GER106

Read more less

MoreBeer! is proud to present our line of premium quality stainless steel tanks. Built in Germany by Speidel, the world-class traditions of German engineering and craftsmanship are reflected in these tanks. And, after examining tanks built by every major manufacturer worldwide, we can safely say that when it comes to features, quality and price, these tanks represent the very best value available in stainless steel beer storage. Safely store small volumes of beer. Convenient top hatch makes cleaning and oaking easy. Heavy duty sealing mechanism and thick gasket ensure an air tight seal. The inside is finished to Speidel quality standards. Bottom drain fittings are 1.5" Tri-Clamp. Conical tanks come standard with legs. Also this tank specifically is made to handle up to 1.2 bar (17.4 psi). Key Features Full Jacket - Fermenters are equipped with a jacket that covers all accessible areas of the tank. This will allow you to hook it into a glycol system (see our Kreyer Chilly45, GLY41) for complete temperature control! Included Options - Features 1.5" T.C. outlets (One complete drainage at the bottom of the cone, one in the middle for racking arm, one on top for blowoff/airlock), and also two welded DIN fittings. These are equipped with hardware at the factory, one has a sample valve; the other has a thermowell/thermometer combination. Interior Finish - Speidel tanks feature an ultra-smooth 2R rated interior surface which effectively means cleaning is too easy. Watch the Krausen wash right off! Weld Quality - Speidel's robotic-arm laser welders create flawless stainless to stainless junctions that look and feel more like a taped fabric seam than a traditional weld. Ultra high-quality welds leave no chance for residual product to harbor spoilage organisms. Warranty - Speidel-Behaelter, GMBH backs up each and every tank with an industry-leading 25 year warranty against defects in materials or workmanship. And, as a 5th generation manufacturer, you can be confident they'll be around to honor that warranty should the need arise. Thickness - Speidel tanks are on average around 25% thicker than Italian manufactured tanks of the same general capacity and dimensions. Complete Drainage Bottoms - Tanks are outfitted with conical, pocketed bottoms for total drainage, which maximizes product yield at rackings and makes cleaning a snap. Tri-Clamp Valve Ferrules - All Speidel tanks come configured for use with Tri-Clamp (TC) style valves and fittings. Other sizes and custom configurations are available at additional cost upon request. **Please Note: TC valves not included. Please inquire with your sales associate for pricing on TC valves and fittings. Features Full Volume of 625l (165 gal). Perfect for fermenting single batches on our 500l Braumeister Handles pressures up to 1.2 bar (17.4 psi) - use as a bright tank or unitank! 1.5" T.C. Drain, Racking Port, and Lid outlet. 8.5" Top hatch for easy cleaning and additions. 2 X DIN10 Fittings w/ Sample Valve and Thermowell/ Thermometer combo Dimensions: 32.25" D x 85" H (820mm D x 1661mm H) Please note: this tank does not include the 1.5" TC Tee with pressure gauge and valve pictured in the top right of the product photo. See our CONP775listed below under "You Might Also Need".

Read more less

Easily replace your larger Braumeister tubing with this 32 ft (10 m) replacement hose kit.  Preinstalled fittings make this the best choice for a backup tubing set. Specifications: Length 32 ft (10 meter) Pressure limit: 6 bar (87 PSI) Temperature limit: 275° F (135 ° C) Inner diameter: 1 inch (25 mm) Outer diameter: 1.5 inches (38mm) Replaces Tubing Set on 200 or 500 liter Braumeisters

Read more less

Premium quality laser-welded 304 stainless steel closed tank  Made in Germany by Speidel and backed by a 25-year warranty Ideal for spirits and fermented beverages like wine, beer, cider, and kombucha. Ultra-smooth 2R interior finish allows for easy cleaning with cold water Outfitted with a 6-bar max cooling jacket for efficient glycol cooling 1.5” tri-clamp ports with two additional DIN ports for included thermometer/thermowell combo and sample valve The top lid provides a convenient opening for additions and the legs provide easy access to the bottom ports Vaulted complete drainage bottom for maximum product yield and easy cleaning We are proud to present these FD storage tanks made of premium quality 304 stainless steel. Built in Germany by Speidel and sold exclusively in the USA by MoreWine! Pro for over 20 years, the world-class traditions of German engineering and craftsmanship are reflected in these tanks. And, after examining tanks built by every major manufacturer worldwide, we can safely say that when it comes to features, quality, and price, these tanks represent the very best value available in stainless steel beer storage. Safely store small volumes of product in these beautiful tanks. The legs make accessing the ports easy and the convenient top hatch makes cleaning a dream when combined with the 2R interior finish. Heavy-duty sealing mechanism and gasket form a seal on top with a stainless steel lid equipped with a T.C. port for adding accessories or an airlock. The inside is finished to Speidel quality standards with flawless welds and a 2R finish. The tanks will support a few PSI of pressure, however, they are not pressure-rated or designed to be used under pressure. Tank Ports Tanks feature 1.5" T.C. outlets (1 on bottom for complete drainage, one in middle for racking arm, one on top for blowoff/airlock), and also two welded DIN fittings. One DIN port is equipped with an included sample valve and the other has an included thermometer and thermowell combination.  The cooling jackets have two 1” NPT ports. Speidel Quality Features Full Jacket - These tanks are equipped with a max cooling jacket rated to 6-bar. This will allow you to hook it into a glycol system for complete temperature control. Interior Finish - Speidel tanks feature an ultra-smooth 2R interior surface which allows you to clean your tanks with cold water, without scrubbing. This saves significant labor costs. Weld Quality - Speidel's robotic-arm laser welders create flawless stainless-to-stainless junctions that look and feel more like a taped fabric seam than a traditional weld. Ultra high-quality welds leave no chance for residual products to harbor spoilage organisms. Warranty - Speidel and MoreWine! Pro back up each and every tank with an industry-leading 25-year warranty against defects in materials or workmanship. Thickness - Speidel tanks are on average around 25% thicker than Italian-manufactured tanks of the same general capacity and dimensions. Complete Drainage Bottoms - These tanks are outfitted with vaulted bottoms for total drainage, which maximizes product yield at racking and makes cleaning a snap. Tank Features: Full Volume of 525 L (138 gal) 1.5" T.C. Drain, Racking Port, and Lid outlet 8.5" Top hatch for easy cleaning and additions 2 X DIN10 Fittings w/ Sample Valve and Thermowell/ Thermometer combo Tank Dimensions: 820mm D x 1466mm H (32.25" D x 57.7" H)

Read more less

Expertly crafted fruit press made by the original manufacturer of the bladder press Features a slotted screen which mirrors commercial press designs Higher juice yield (65-70%) compared to other press models Can be used with any domestic water supply that provides at least 36 psi of pressure Easy to clean after use—simply spray down with a hose and towel dry Made in Germany by Speidel Speidel was the original manufacturer of the bladder press. While similar to the Italian models in operation, Speidel offers a few quality upgrades. To obtain a better press Speidel uses a slotted screen, similar to what is offered on large commercial presses, instead of a screen with circular perforations. Speidel presses also offer superior hardware, a recessed valve assembly (to reduce accidental breakage) and a stainless frame on the 180L model. Compared to other presses, the Speidel hydro press has a higher juice yield (~65-70%) and works completely without electricity and with minimal effort. This press can be used with any domestic water supply the provides at least 2.5 bar (36 psi) of pressure. Pressing pressure and pressing time is simply regulated by the water flow. These units are extremely easy to care for and can be cleaned quickly by simply spraying it down with a hose after use. You will find the quality you'd expect from a product that is 100% German-made Overall height is 52" and basket height is 34".  Press Cycles average around 60 minutes. Base is 36" deep and 38" wide. Includes: Complete press assembly Inner mesh bag (to keep fruit from getting in the stainless basket and make cleanup easier) Plastic "spray-protection bag" to keep juice from squirting out Fittings to connect garden hose Instruction manual Presses ship in a corrugated box. Minor assembly (attaching legs) is required before use 1 Year Warranty on all parts! FAQ: Can the press be operated with air pressure? No. These are hydraulic presses that may only be operated with water. When operating with compressed air, there is a risk of explosion and a very high risk of injury if the membrane bursts due to excess pressure or damage. Is a minimum water pressure required? In order to ensure the function and the best possible yield, there should be a minimum water pressure of 2-2.5 bar on the press. What if the water supply delivers more than 3 bar? In principle, this is not a problem, as if the water pressure inside the press exceeds 3 bar, the pressure relief valve opens and there is no pressure-related damage. How many apples make how much juice? On average, 50kg (110 lbs) of apples produce around 30-35L (8-9 gal) of juice, depending on the variety and quality of the apples.

Read more less

Variable capacity tank well-suited for fermentation, short-term wine storage, kombucha, pickling, and other applications Floating lid can be positioned as needed to match the volume of the liquid you're working with Tank & lid are made from 304 stainless steel with a food-grade, clear plastic gasket for the lid Air pump with pressure gauge, dry airlock, and spigot are included Features cooling jacket, thermometer & thermowell, and 1.5" tri-clamp port with butterfly valve Made in Italy by Marchisio Variable Capacity tanks, also called Variable Volume tanks, made in Italy by Marchisio. This style of tank features a ‘floating’ lid with an inflatable gasket that can be positioned at any height in the tank. Use the included air pump to inflate the lid gasket. Whether you position the lid directly on the liquid, just above, or at the top of the tank is up to you. They are used as affordable stainless production tanks for applications ranging from winemaking to pickled foods and Kombucha.  Considerations for Winemaking When used in winemaking we recommend these tanks for fermentation and short-term storage. If you are considering storing wine in a variable volume tank for longer than a month, we suggest you consider our German-made Speidel Variable Volume Tanks. In addition to other quality features like a mirror polish inside, thicker stainless, and robotically welded seams, Speidel tanks feature a proprietary lid gasket that only fits their tanks.  This gasket is made from a very high quality, thick, white, food-grade, material that makes a true seal and resists oxygen transfer. This gasket also does not have the seam line that clear gaskets have. To learn more about the clear gaskets watch our video listed below the product copy.  All variable volume tanks other than those from Speidel, including these tanks from Marchisio, feature a standard clear gasket that is sufficient for many applications, but we do not recommend them for long term wine storage.  Marchisio We have been buying tanks from Marchisio since the 1990’s, so we have a long history of collaboration.  Marchisio is a classic Italian tank manufacturer that represents the best value in the industry. Great quality at a very competitive price. All tanks have a classic marbled finish on the outside and a smooth polished finish on the inside.  Each tank includes a dry airlock – a style of airlock that has a marble inside to make a seal. We recommend replacing this airlock with a classic water airlock to reduce potential oxidation. Includes: 304 Stainless Tank w/ Cooling Jacket 304 Stainless Floating Lid Food-Grade Floating Gasket Air Pump with pressure gauge Connection kit for connecting gasket to pump Dial Thermometer & Thermowell 1.5" Tri-Clamp port w/ butterfly valve Dry Airlock for tank 200L Specifications: Nominal volume: 200 Liters (52.8 gallons) Effective volume: 197 Liters (52 gallons) Diameter: 65 cm (25.5 inches) Height: 65 cm (25.5 inches) Port size: 1.5" T.C. *Please Note: Tank may differ slightly from image shown. Stands are sold separately.

Read more less

Variable capacity tank well-suited for fermentation, short-term wine storage, kombucha, pickling, and other applications Floating lid can be positioned as needed to match the volume of the liquid you're working with Tank & lid are made from 304 stainless steel with a food-grade, clear plastic gasket for the lid Air pump with pressure gauge, dry airlock, and 1.5" tri-clamp port with butterfly valve Features cooling jacket, thermometer & thermowell, 1.5" tri-clamp port Made in Italy by Marchisio Variable Capacity tanks, also called Variable Volume tanks, made in Italy by Marchisio. This style of tank features a ‘floating’ lid with an inflatable gasket that can be positioned at any height in the tank. Use the included air pump to inflate the lid gasket. Whether you position the lid directly on the liquid, just above, or at the top of the tank is up to you. They are used as affordable stainless production tanks for applications ranging from winemaking to pickled foods and Kombucha.  Considerations for Winemaking When used in winemaking we recommend these tanks for fermentation and short-term storage. If you are considering storing wine in a variable volume tank for longer than a month, we suggest you consider our German-made Speidel Variable Volume Tanks. In addition to other quality features like a mirror polish inside, thicker stainless, and robotically welded seams, Speidel tanks feature a proprietary lid gasket that only fits their tanks.  This gasket is made from a very high quality, thick, white, food-grade, material that makes a true seal and resists oxygen transfer. This gasket also does not have the seam line that clear gaskets have. To learn more about the clear gaskets watch our video listed below the product copy.  All variable volume tanks other than those from Speidel, including these tanks from Marchisio, feature a standard clear gasket that is sufficient for many applications, but we do not recommend them for long term wine storage.  Marchisio We have been buying tanks from Marchisio since the 1990’s, so we have a long history of collaboration.  Marchisio is a classic Italian tank manufacturer that represents the best value in the industry. Great quality at a very competitive price. All tanks have a classic marbled finish on the outside and a smooth polished finish on the inside.  Each tank includes a dry airlock – a style of airlock that has a marble inside to make a seal. We recommend replacing this airlock with a classic water airlock to reduce potential oxidation. Includes: 304 Stainless Tank w/ Cooling Jacket 304 Stainless Floating Lid Food-Grade Floating Gasket Air Pump with pressure gauge Connection kit for connecting gasket to pump Dial Thermometer & Thermowell 1.5" Tri-Clamp port w/ butterfly valve Dry Airlock for tank 300L Specifications: Nominal volume: 300 Liters (79.2 gallons) Effective volume: 305 Liters (80.5 gallons) Diameter: 65 cm (25.5 inches) Height: 100 cm (39.3 inches) Port size: 1.5" T.C. *Please Note: Tank may differ slightly from image shown. Stands are sold separately.

Read more less

Variable capacity tank well-suited for fermentation, short-term wine storage, kombucha, pickling, and other applications Floating lid can be positioned as needed to match the volume of the liquid you're working with Tank & lid are made from 304 stainless steel with a food-grade, clear plastic gasket for the lid Air pump with pressure gauge, dry airlock, and 1.5" tri-clamp port with butterfly valve Features cooling jacket, thermometer & thermowell, 1.5" tri-clamp port Made in Italy by Marchisio Variable Capacity tanks, also called Variable Volume tanks, made in Italy by Marchisio. This style of tank features a ‘floating’ lid with an inflatable gasket that can be positioned at any height in the tank. Use the included air pump to inflate the lid gasket. Whether you position the lid directly on the liquid, just above, or at the top of the tank is up to you. They are used as affordable stainless production tanks for applications ranging from winemaking to pickled foods and Kombucha.  Considerations for Winemaking When used in winemaking we recommend these tanks for fermentation and short-term storage. If you are considering storing wine in a variable volume tank for longer than a month, we suggest you consider our German-made Speidel Variable Volume Tanks. In addition to other quality features like a mirror polish inside, thicker stainless, and robotically welded seams, Speidel tanks feature a proprietary lid gasket that only fits their tanks.  This gasket is made from a very high quality, thick, white, food-grade, material that makes a true seal and resists oxygen transfer. This gasket also does not have the seam line that clear gaskets have. To learn more about the clear gaskets watch our video listed below the product copy.  All variable volume tanks other than those from Speidel, including these tanks from Marchisio, feature a standard clear gasket that is sufficient for many applications, but we do not recommend them for long term wine storage.  Marchisio We have been buying tanks from Marchisio since the 1990’s, so we have a long history of collaboration.  Marchisio is a classic Italian tank manufacturer that represents the best value in the industry. Great quality at a very competitive price. All tanks have a classic marbled finish on the outside and a smooth polished finish on the inside.  Each tank includes a dry airlock – a style of airlock that has a marble inside to make a seal. We recommend replacing this airlock with a classic water airlock to reduce potential oxidation. Includes: 304 Stainless Tank w/ Cooling Jacket 304 Stainless Floating Lid Food-Grade Floating Gasket Air Pump with pressure gauge Connection kit for connecting gasket to pump Dial Thermometer & Thermowell 1.5" Tri-Clamp port w/ butterfly valve Dry Airlock for tank 400L Specifications: Nominal volume: 400 Liters (105.7 gallons) Effective volume: 424 Liters (112 gallons) Diameter: 65 cm (25.5 inches) Height: 130 cm (51 inches) Port size: 1.5" T.C. *Please Note: Tank may differ slightly from image shown. Stands are sold separately.

Read more less

Variable capacity tank well-suited for fermentation, short-term wine storage, kombucha, pickling, and other applications Floating lid can be positioned as needed to match the volume of the liquid you're working with Tank & lid are made from 304 stainless steel with a food-grade, clear plastic gasket for the lid Air pump with pressure gauge, dry airlock, and 1.5" tri-clamp port with butterfly valve Features cooling jacket, thermometer & thermowell, 1.5" tri-clamp port Made in Italy by Marchisio Variable Capacity tanks, also called Variable Volume tanks, made in Italy by Marchisio. This style of tank features a ‘floating’ lid with an inflatable gasket that can be positioned at any height in the tank. Use the included air pump to inflate the lid gasket. Whether you position the lid directly on the liquid, just above, or at the top of the tank is up to you. They are used as affordable stainless production tanks for applications ranging from winemaking to pickled foods and Kombucha.  Considerations for Winemaking When used in winemaking we recommend these tanks for fermentation and short-term storage. If you are considering storing wine in a variable volume tank for longer than a month, we suggest you consider our German-made Speidel Variable Volume Tanks. In addition to other quality features like a mirror polish inside, thicker stainless, and robotically welded seams, Speidel tanks feature a proprietary lid gasket that only fits their tanks.  This gasket is made from a very high quality, thick, white, food-grade, material that makes a true seal and resists oxygen transfer. This gasket also does not have the seam line that clear gaskets have. To learn more about the clear gaskets watch our video listed below the product copy.  All variable volume tanks other than those from Speidel, including these tanks from Marchisio, feature a standard clear gasket that is sufficient for many applications, but we do not recommend them for long term wine storage.  Marchisio We have been buying tanks from Marchisio since the 1990’s, so we have a long history of collaboration.  Marchisio is a classic Italian tank manufacturer that represents the best value in the industry. Great quality at a very competitive price. All tanks have a classic marbled finish on the outside and a smooth polished finish on the inside.  Each tank includes a dry airlock – a style of airlock that has a marble inside to make a seal. We recommend replacing this airlock with a classic water airlock to reduce potential oxidation. Includes: 304 Stainless Tank w/ Cooling Jacket 304 Stainless Floating Lid Food-Grade Floating Gasket Air Pump with pressure gauge Connection kit for connecting gasket to pump Dial Thermometer & Thermowell 1.5" Tri-Clamp port w/ butterfly valve Dry Airlock for tank 500L Specifications: Nominal volume: 500 Liters (132.0 gallons) Effective volume: 514 Liters (135.7 gallons) Diameter: 79 cm (31.1 inches) Height: 100 cm (39.3 inches) Port size: 1.5" T.C. *Please Note: Tank may differ slightly from image shown. Stands are sold separately.

Read more less

Please​ note: the primary image is an example image and does not exactly match this tank. See below for features and specifications. Premium quality laser-welded 304 stainless steel closed tank  Made in Germany by Speidel and backed by a 25-year warranty Ideal for spirits and fermented beverages like wine, beer, cider, and kombucha. Ultra-smooth 2R interior finish allows for easy cleaning with cold water 1.5” tri-clamp ports with two additional DIN ports for included thermometer/thermowell combo and sample valve The top lid provides a convenient opening for additions and the legs provide easy access to the bottom ports Vaulted complete drainage bottom for maximum product yield and easy cleaning We are proud to present these FD storage tanks made of premium quality 304 stainless steel. Built in Germany by Speidel and sold exclusively in the USA by MoreWine! Pro for over 20 years, the world-class traditions of German engineering and craftsmanship are reflected in these tanks. And, after examining tanks built by every major manufacturer worldwide, we can safely say that when it comes to features, quality, and price, these tanks represent the very best value available in stainless steel beer storage. Safely store small volumes of product in these beautiful tanks. The legs make accessing the ports easy and the convenient top hatch makes cleaning a dream when combined with the 2R interior finish. Heavy-duty sealing mechanism and gasket form a seal on top with a stainless steel lid equipped with a T.C. port for adding accessories or an airlock. The inside is finished to Speidel quality standards with flawless welds and a 2R finish.  The tanks will support a few PSI of pressure, however, they are not pressure-rated or designed to be used under pressure.  Tank Ports Tanks feature 1.5" T.C. outlets (1 on bottom for complete drainage, one in middle for racking arm, one on top for blowoff/airlock), and also two welded DIN fittings. One DIN port is equipped with an included sample valve and the other has an included thermometer and thermowell combination. Speidel Quality Features Interior Finish - Speidel tanks feature an ultra-smooth 2R interior surface which allows you to clean your tanks with cold water, without scrubbing. This saves significant labor costs. Weld Quality - Speidel's robotic-arm laser welders create flawless stainless-to-stainless junctions that look and feel more like a taped fabric seam than a traditional weld. Ultra high-quality welds leave no chance for residual products to harbor spoilage organisms. Warranty - Speidel and MoreWine! Pro back up each and every tank with an industry-leading 25-year warranty against defects in materials or workmanship. Thickness - Speidel tanks are on average around 25% thicker than Italian-manufactured tanks of the same general capacity and dimensions. Complete Drainage Bottoms - These tanks are outfitted with vaulted bottoms for total drainage, which maximizes product yield at racking and makes cleaning a snap.  Tank Features: Full Volume of 240 L (63.4 gal) Perfect for blending two barrels of wine 1.5" T.C. Drain, Racking Port, and Lid outlet 8.5" Top hatch for easy cleaning and additions 2 X DIN10 Fittings w/ Sample Valve and Thermowell/Thermometer combo Tank Dimensions: 550mm D x 1524mm H (21.6" D x 60" H)

Read more less

Please​ note: the primary image is an example image and does not exactly match this tank. See below for features and specifications. Premium quality laser-welded 304 stainless steel closed tank  Made in Germany by Speidel and backed by a 25-year warranty Ideal for spirits and fermented beverages like wine, beer, cider, and kombucha. Ultra-smooth 2R interior finish allows for easy cleaning with cold water 1.5” tri-clamp ports with two additional DIN ports for included thermometer/thermowell combo and sample valve The top lid provides a convenient opening for additions and the legs provide easy access to the bottom ports Vaulted complete drainage bottom for maximum product yield and easy cleaning We are proud to present these FD storage tanks made of premium quality 304 stainless steel. Built in Germany by Speidel and sold exclusively in the USA by MoreWine! Pro for over 20 years, the world-class traditions of German engineering and craftsmanship are reflected in these tanks. And, after examining tanks built by every major manufacturer worldwide, we can safely say that when it comes to features, quality, and price, these tanks represent the very best value available in stainless steel beer storage. Safely store small volumes of product in these beautiful tanks. The legs make accessing the ports easy and the convenient top hatch makes cleaning a dream when combined with the 2R interior finish. Heavy-duty sealing mechanism and gasket form a seal on top with a stainless steel lid equipped with a T.C. port for adding accessories or an airlock. The inside is finished to Speidel quality standards with flawless welds and a 2R finish.  The tanks will support a few PSI of pressure, however, they are not pressure-rated or designed to be used under pressure.  Tank Ports Tanks feature 1.5" T.C. outlets (1 on bottom for complete drainage, one in middle for racking arm, one on top for blowoff/airlock), and also two welded DIN fittings. One DIN port is equipped with an included sample valve and the other has an included thermometer and thermowell combination. Speidel Quality Features Interior Finish - Speidel tanks feature an ultra-smooth 2R interior surface which allows you to clean your tanks with cold water, without scrubbing. This saves significant labor costs. Weld Quality - Speidel's robotic-arm laser welders create flawless stainless-to-stainless junctions that look and feel more like a taped fabric seam than a traditional weld. Ultra high-quality welds leave no chance for residual products to harbor spoilage organisms. Warranty - Speidel and MoreWine! Pro back up each and every tank with an industry-leading 25-year warranty against defects in materials or workmanship. Thickness - Speidel tanks are on average around 25% thicker than Italian-manufactured tanks of the same general capacity and dimensions. Complete Drainage Bottoms - These tanks are outfitted with vaulted bottoms for total drainage, which maximizes product yield at racking and makes cleaning a snap.  Tank Features: Full Volume of 100 L (26.4 gal) Perfect for blending two barrels of wine 1.5" T.C. Drain, Racking Port, and Lid outlet 8.5" Top hatch for easy cleaning and additions 2 X DIN10 Fittings w/ Sample Valve and Thermowell/Thermometer combo Tank Dimensions: 440mm D x 1141mm H (17.3" D x 45" H)

Read more less

Please​ note: the primary image is an example image and does not exactly match this tank. See below for features and specifications. Variable capacity tank well-suited for fermentation, wine aging, kombucha, and other applications Floating lid can be positioned as needed to match the volume of the liquid you're working with Proprietary rubber lid gasket allows for a superior seal compared to traditional gaskets, providing better protection for your wine Partial coverage cooling jacket for glycol cooling Swinging manyway door for easy removal of grape skins Hand crank lifting arm for lowering and lifting the floating lid Made in Germany by Speidel We are proud to present our line of premium quality stainless steel tanks. Built in Germany by Speidel, the world-class traditions of German engineering and craftsmanship are reflected in these tanks. And, after examining tanks built by every major manufacturer worldwide, we can safely say that when it comes to features, quality and price, these tanks represent the very best value available in stainless steel wine storage. Speidel Quality Features: Cooling Jacket - Fermenters are equipped with a partial jacket that is designed for an operating pressure of 2.5 to 6 bar. This will allow you to hook it into a glycol system (see our Kreyer Chilly45, GLY410) for complete temperature control! Interior Finish - Speidel tanks feature an ultra-smooth 2R rated interior surface which effectively resists the build-up of tartrate residues. Clean your tanks with cold water after cold stabilization! Say goodbye to harsh cleaning chemicals and expensive CIP systems! Weld Quality - Speidel's robotic-arm laser welders create flawless stainless to stainless junctions that look and feel more like a taped fabric seam than a traditional weld. Ultra high-quality welds leave no chance for residual product to harbor spoilage organisms. Thickness - Speidel tanks are designed to be the correct thickness for the tank's total volume. Manway - The "red wine" manway allows you to easily remove skins. Complete Drainage Bottoms - All Speidel tanks are outfitted with conical, pocketed bottoms for total drainage, which maximizes product yield at rackings and makes cleaning a snap. *Please note that smaller, flat-bottomed tanks do not feature total drainage bottoms. Tri-Clamp Valve Ferrules - All Speidel tanks come configured for use with Tri-Clamp (TC) style valves and fittings. Tanks up to 1600L capacity are outfitted with 1.5" TC racking outlet and bottom outlet. **Please Note: TC valves not included. Please inquire with your sales associate for pricing on TC valves and fittings. Rubber Lid Gaskets - The white rubber gaskets used by Speidel are much thicker than the traditional clear vinyl gaskets, which along with their extruded manufacturing process provide a much better seal with the tanks wall. They're seamless and more oxygen resistant than the clear gaskets. That means better protection for your wines! Warranty - Speidel-Behaelter, GMBH backs up each and every tank with an industry-leading 25 year warranty against defects in materials or workmanship. And, as a 5th generation manufacturer, you can be confident they'll be around to honor that warranty should the need arise. Tank Features: Volume: Sealed, 3850 L Variable Capacity Tank includes Floating lid and Heavy Duty White Rubber Gasket Complete Drainage Dish Bottom Lifting Arm Reinforced Racking valve 1.5" TC connections NW10 fitting for use with Sample Valve or Thermometer and Thermowell Combo (Sample Valve or Thermometer and Thermowell not included) Note: Over tightening the airlock / orange bulk head can cause it to crack. Only thread the airlock down until it feels snug. Do not over tighten.

Read more less

Please​ note: the primary image is an example image and does not exactly match this tank. See below for features and specifications. Variable capacity tank well-suited for fermentation, wine aging, kombucha, and other applications Floating lid can be positioned as needed to match the volume of the liquid you're working with Proprietary rubber lid gasket allows for a superior seal compared to traditional gaskets, providing better protection for your wine Partial coverage cooling jacket for glycol cooling Swinging manyway door for easy removal of grape skins Pulley rope for lowering and lifting the floating lid Made in Germany by Speidel We are proud to present our line of premium quality stainless steel tanks. Built in Germany by Speidel, the world-class traditions of German engineering and craftsmanship are reflected in these tanks. And, after examining tanks built by every major manufacturer worldwide, we can safely say that when it comes to features, quality and price, these tanks represent the very best value available in stainless steel wine storage. Speidel Quality Features: Cooling Jacket - Fermenters are equipped with a partial jacket that is designed for an operating pressure of 2.5 to 6 bar. This will allow you to hook it into a glycol system (see our Kreyer Chilly45, GLY410) for complete temperature control! Interior Finish - Speidel tanks feature an ultra-smooth 2R rated interior surface which effectively resists the build-up of tartrate residues. Clean your tanks with cold water after cold stabilization! Say goodbye to harsh cleaning chemicals and expensive CIP systems! Weld Quality - Speidel's robotic-arm laser welders create flawless stainless to stainless junctions that look and feel more like a taped fabric seam than a traditional weld. Ultra high-quality welds leave no chance for residual product to harbor spoilage organisms. Thickness - Speidel tanks are designed to be the correct thickness for the tank's total volume. Manway - The "red wine" manway allows you to easily remove skins. Complete Drainage Bottoms - All Speidel tanks are outfitted with conical, pocketed bottoms for total drainage, which maximizes product yield at rackings and makes cleaning a snap. *Please note that smaller, flat-bottomed tanks do not feature total drainage bottoms. Tri-Clamp Valve Ferrules - All Speidel tanks come configured for use with Tri-Clamp (TC) style valves and fittings. Tanks up to 1600L capacity are outfitted with 1.5" TC racking outlet and bottom outlet. **Please Note: TC valves not included. Please inquire with your sales associate for pricing on TC valves and fittings. Rubber Lid Gaskets - The white rubber gaskets used by Speidel are much thicker than the traditional clear vinyl gaskets, which along with their extruded manufacturing process provide a much better seal with the tanks wall. They're seamless and more oxygen resistant than the clear gaskets. That means better protection for your wines! Warranty - Speidel-Behaelter, GMBH backs up each and every tank with an industry-leading 25 year warranty against defects in materials or workmanship. And, as a 5th generation manufacturer, you can be confident they'll be around to honor that warranty should the need arise. Tank Features: Volume: Sealed, 1600 L Variable Capacity Tank includes Floating lid and Heavy Duty White Rubber Gasket Complete Drainage Dish Bottom Lifting Arm Reinforced Racking valve 1.5" TC connections NW10 fitting for use with Sample Valve or Thermometer and Thermowell Combo (Sample Valve or Thermometer and Thermowell not included) Note: Over tightening the airlock / orange bulk head can cause it to crack. Only thread the airlock down until it feels snug. Do not over tighten.

Read more less

Stainless steel storage rack for Speidel Flat Bottom Tanks 550mm in diameter. Raise your tank off the ground to a comfortable operating height. Compatible with 220L tank GER220VF. Base Height: 15.9"

Read more less

Stainless steel storage rack for Speidel Flat Bottom Tanks 440mm in diameter. Raise your tank off the ground to a comfortable operating height. Compatible with 110L and 120L tanks GER110VF and GER120F. Base Height: 15.9"

Read more less

Stainless steel storage rack for Speidel Flat Bottom Tanks 550mm in diameter. Raise your tank off the ground to a comfortable operating height. Compatible with 650L tank GER650VF. Base Height: 15.9"

Read more less

Stainless steel storage rack for Speidel Flat Bottom Tanks 550mm in diameter. Raise your tank off the ground to a comfortable operating height. Compatible with 290L tank GER290VF. Base Height: 15.9"

Read more less

Please​ note: the primary image is an example image and does not exactly match this tank. See below for features and specifications. Variable capacity tank well-suited for fermentation, wine aging, kombucha, and other applications Floating lid can be positioned as needed to match the volume of the liquid you're working with Proprietary rubber lid gasket allows for a superior seal compared to traditional gaskets, providing better protection for your wine Pulley rope for lowering and lifting the floating lid Made in Germany by Speidel We are proud to present our line of premium quality stainless steel tanks. Built in Germany by Speidel, the world-class traditions of German engineering and craftsmanship are reflected in these tanks. And, after examining tanks built by every major manufacturer worldwide, we can safely say that when it comes to features, quality and price, these tanks represent the very best value available in stainless steel wine storage. Speidel Quality Features: Interior Finish - Speidel tanks feature an ultra-smooth 2R rated interior surface which effectively resists the build-up of tartrate residues. Clean your tanks with cold water after cold stabilization! Say goodbye to harsh cleaning chemicals and expensive CIP systems!   Weld Quality - Speidel's robotic-arm laser welders create flawless stainless to stainless junctions that look and feel more like a taped fabric seam than a traditional weld. Ultra high-quality welds leave no chance for residual product to harbor spoilage organisms.   Thickness - Speidel tanks are designed to be the correct thickness for the tank's total volume.   Complete Drainage Bottoms - All Speidel tanks are outfitted with conical, pocketed bottoms for total drainage, which maximizes product yield at rackings and makes cleaning a snap. *Please note that smaller, flat-bottomed tanks do not feature total drainage bottoms.   Tri-Clamp Valve Ferrules - All Speidel tanks come configured for use with Tri-Clamp (TC) style valves and fittings. Tanks up to 1600L capacity are outfitted for use with 1.5in TC. Other sizes and custom configurations are available at additional cost upon request. **Please Note: TC valves not included. Please inquire with your sales associate for pricing on TC valves and fittings.   Rubber Lid Gaskets - The white rubber gaskets used by Speidel are much thicker than the traditional clear vinyl gaskets, which along with their extruded manufacturing process provide a much better seal with the tanks wall. They're seamless and more oxygen resistant than the clear gaskets. That means better protection for your wines!   Warranty - Speidel-Behaelter, GMBH backs up each and every tank with an industry-leading 25 year warranty against defects in materials or workmanship. And, as a 5th generation manufacturer, you can be confident they'll be around to honor that warranty should the need arise. Tank Features: Volume: Sealed, 1100 L.  Open top, 1183 L Variable Capacity Tank includes Floating lid and Heavy Duty White Rubber Gasket Complete Drainage Dish Bottom Lifting Arm Reinforced Racking valve 1.5" TC connections NW10 fitting for use with Sample Valve or Thermometer and Thermowell Combo (Sample Valve or  Thermometer and Thermowell not included)   Note: Over tightening the airlock / orange bulk head can cause it to crack. Only thread the airlock down until it feels snug. Do not over tighten.    

Read more less

Please note: the primary image is an example image and does not exactly match this custom tank. See the technical drawing below for exact specifications. The FO Variable Volume tank is Speidel's flagship Variable Volume tank for storage. This preconfigured tank comes with: Volume: Sealed, 1100 L. Open top, 1183 L Variable Capacity Tank includes Floating lid and Heavy Duty White Rubber Gasket Max Coverage Jacket: 2.0 m² (4x 1" MPT connections) Complete Drainage Dish Bottom Lifting Arm Reinforced Racking valve 1.5" TC connections Thermometer and Thermowell Combo included NW10 Gland for Sample Valve (Valve not included) Key Features Available in 28 sizes covering 6 different tank diameters from 1,100L to 15,200L (larger tanks available with special shipping arrangements) 1,100L & 1,650L Tanks equipped with 1.5" TC racking and drainage ports. All other tanks equipped with 2" TC. Larger fittings available by request Reinforced racking ports prevent tank wall flex and can support the weight of a tank mixer. All tanks have welded-on mounting points for lid lifting arms. Tanks from 1,650L include a lifting arm; from 2,200L up the arm is winch-operated View the resource for more information on the key features of all Speidel Tanks.

Read more less

The original all-in-one brewery still made in Germany! 5" touchscreen is easy to use and guides you through the brewing process Brew all-grain beer inside your home—no gas burner needed Built-in cooling jacket eliminates the need for awkward wort chillers 2R interior stainless finish with electropolished heating coil The "Mercedes®" of brewing systems. When you want the best, this is it. The Braumeister: A patented, electric, self-contained all-grain brewing system producing 61 gallons of wort per brew. The beauty of the Speidel Braumeister is in simplicity and small footprint. This product is not part of our free shipping policy, however we only charge actual freight from our California or Pennsylvania Warehouse to your location. Touchscreen Control Panel The new automatic control system brews with your own individual recipes and guides you through the brewing process. Recipes and software updates can be synced automatically with the integrated WiFi. The time and temperature are precisely maintained through all brewing phases. The new touchscreen makes it even easier to operate the Braumeister. In addition, the large Braumeisters have integrated a new pressure sensor-controlled pump control. The pressure sensor in the pressure line which is connected with the malt pipe allows you to regulate the pump speed via the pressure. The new timer function saves time because, for example, the brewing water can be heated up early in the morning. One Vessel With the Braumeister you Mash, Boil and Cool all in the same vessel. All actions are controlled by the included electronic control system. Your brewing process is started in the Braumeister the same as with any other system, by mixing cracked grain with hot water. From there traditional step mashes at multiple temperatures are easy to maintain when you set your program on the controller. Traditional Sparging Optional Because of the constant movement of wort, the high ratio of liquid in the mash and the unique grain bed filters, the efficiency of removing sugar from the mash is good. This eliminates the need for a traditional sparge. However, when you shift from Mashing to the boil by lifting the grain bed out of the tank you can rinse the grain with hot water, performing a more traditional sparge if desired. Boil and Cool After the grain basket is removed with the included winch you will begin a traditional boil for 60 to 90 minutes. After the boil is over you connect to your glycol system (see our Kreyer Chilly45 GLY41) and use the built-in dimpled cooling jacket to cool the wort down. Simple. Product Specifications: 208V Three Phase Power Built in frequency converter allows it to run on 50 or 60hz Designed to make approximately 61 gallons of wort, 52 gallons finished beer. Dimensions: 54" W x 34" D x 79" T heating spiral: 3 x 3000 Watt heating capacity 370 Watt pump 92.59 lb max qty of malt One year warranty Control Software: Brewing guide—also shows quantity and kind of raw materials Precise temperature measuring Pump pauses are adjustable Integrated WiFi for software updates and sync of recipes with MySpeidel Integrated database of raw materials Timer function with delayed start Ferment control compatible with the Tilt Hydrometer Control Hardware: IP 65 water resistant 5" touchscreen Additional connections 24V and CAN for future accessories WiFi and Bluetooth integrated

Read more less

High-quality stainless steel fermentation and storage tank Laser-welded double jacket for cooling and fermentation temperature control Gasketed lid creates an airtight seal of long-term storage with no oxygen ingress Impeccable 2R (IIId) surface finish for easy cleaning A versatile vessel that works perfectly for storing, mixing, fermenting, and transporting liquid Made in Germany by Speidel This new universal cask with cooling jacket from Speidel is perfect for storing, mixing, fermenting, and transporting a variety of liquids.  These premium storage tanks have a gasketed lid for airtight storage, handles for easy moving, and fittings to add airlocks or taps as necessary.  These casks are made with Speidel's impeccable craftsmanship, meaning high quality 304 stainless steel construction with a IIId surface finish, insuring easy cleanup and a long service life. Features: Laser-welded double jacket for cooling with G1" male thread (1" BSPP) 304 SS construction IIId surface finish - easy cleanup 60 l (15.9 gal) volume Gasketed sealed tanks - no oxygen permeation during storage 69.2 cm (27.2") Height x 35 cm (13.8") Ø German quality construction with 25 year warranty Airlock hole with sealing cap in lid - use for storage or buy an airlock to use for fermenting  

Read more less

High-quality stainless steel fermentation and storage tank Laser-welded double jacket for cooling and fermentation temperature control Gasketed lid creates an airtight seal of long-term storage with no oxygen ingress Impeccable 2R (IIId) surface finish for easy cleaning A versatile vessel that works perfectly for storing, mixing, fermenting, and transporting liquid Made in Germany by Speidel This new universal cask with cooling jacket from Speidel is perfect for storing, mixing, fermenting, and transporting a variety of liquids.  These premium storage tanks have a gasketed lid for airtight storage, handles for easy moving, and fittings to add airlocks or taps as necessary.  These casks are made with Speidel's impeccable craftsmanship, meaning high quality 304 stainless steel construction with a IIId surface finish, insuring easy cleanup and a long service life. Features: Laser-welded double jacket for cooling with G1" male thread (1" BSPP) 304 SS construction IIId surface finish - easy cleanup 30 l (7.9 gal) volume Gasketed sealed tanks - no oxygen permeation during storage 40 cm (15.8") Height x 35 cm (13.8") Ø German quality construction with 25 year warranty Airlock hole with sealing cap in lid - use for storage or buy an airlock to use for fermenting    

Read more less

High-quality stainless steel fermentation and storage tank Gasketed lid creates an airtight seal of long-term storage with no oxygen ingress Impeccable 2R (IIId) surface finish for easy cleaning A versatile vessel that works perfectly for storing, mixing, fermenting, and transporting liquid Made in Germany by Speidel This new universal cask from Speidel is perfect for storing, mixing, fermenting, and transporting a variety of liquids.  These premium storage tanks have a gasketed lid for airtight storage, handles for easy moving, and fittings to add airlocks or taps as necessary.  These casks are made with Speidel's impeccable craftsmanship, meaning high quality 304 stainless steel construction with a IIId surface finish, insuring easy cleanup and a long service life. Features: 304 SS construction IIId surface finish - easy cleanup 30 l (7.9 gal) volume Gasketed sealed tanks - no oxygen permeation during storage 40 cm (15.8") Height x 35 cm (13.8") Ø German quality construction with 25 year warranty Airlock hole with sealing cap in lid - use for storage or buy an airlock to use for fermenting  

Read more less

High-quality stainless steel fermentation and storage tank Gasketed lid creates an airtight seal of long-term storage with no oxygen ingress Impeccable 2R (IIId) surface finish for easy cleaning A versatile vessel that works perfectly for storing, mixing, fermenting, and transporting liquid Made in Germany by Speidel This new universal cask from Speidel is perfect for storing, mixing, fermenting, and transporting a variety of liquids.  These premium storage tanks have a gasketed lid for airtight storage, handles for easy moving, and fittings to add airlocks or taps as necessary.  These casks are made with Speidel's impeccable craftsmanship, meaning high quality 304 stainless steel construction with a IIId surface finish, insuring easy cleanup and a long service life. Features: 304 SS construction IIId surface finish - easy cleanup 60 l (15.9 gal) volume Gasketed sealed tanks - no oxygen permeation during storage 69.2 cm (27.2") Height x 35 cm (13.8") Ø German quality construction with 25 year warranty Airlock hole with sealing cap in lid - use for storage or buy an airlock to use for fermenting Outlet Port: Internal thread of 3/4" (BSP)  

Read more less

Premium quality laser-welded stainless steel sealed tank wine, beer, spirits, cider, kombucha, and other beverages Cooling jacket covers the entire tank of efficient glycol cooling Top hatch provides a large, convenient opening for adding oak or other additions Conical-shaped complete drainage bottom for maximum product yield and easy cleaning Tri-clamp ferrule ports with thermometer and thermowell combo included Made in Germany by Speidel We are proud to present our line of premium quality stainless steel tanks. Built in Germany by Speidel, the world-class traditions of German engineering and craftsmanship are reflected in these tanks. And, after examining tanks built by every major manufacturer worldwide, we can safely say that when it comes to features, quality and price, these tanks represent the very best value available in stainless steel beverage storage. We've found that these tanks work well for beer, wine, spirits, cider, and more! Convenient top hatch makes cleaning and oaking easy. Heavy duty sealing mechanism and thick gasket ensure an air tight seal. The tanks will support a few p.s.i. of pressure, however they are not pressure rated or designed to be used under pressure. The inside is finished to Speidel quality standards. Bottom drain fittings are 1.5" Tri-Clamp. Flat bottom tanks do not have legs; conical tanks come standard with legs. Speidel Quality Features: Full Jacket - Equipped with a jacket that covers all accessible areas of the tank and is designed for an operating pressure of 2.5 to 6 bar. This will allow you to hook it into a glycol system (see our Kreyer Chilly45, GLY410) for complete temperature control! Interior Finish - Speidel tanks feature an ultra-smooth 2R rated interior surface which effectively resists the build-up of tartrate residues. Clean your tanks with cold water after cold stabilization! Say goodbye to harsh cleaning chemicals and expensive CIP systems! Weld Quality - Speidel's robotic-arm laser welders create flawless stainless to stainless junctions that look and feel more like a taped fabric seam than a traditional weld. Ultra high-quality welds leave no chance for residual product to harbor spoilage organisms. Thickness - Speidel tanks are designed to be the correct thickness for the tank's total volume. Complete Drainage Bottoms - All Speidel tanks are outfitted with conical, pocketed bottoms for total drainage, which maximizes product yield at rackings and makes cleaning a snap. *Please note that smaller, flat-bottomed tanks do not feature total drainage bottoms. Tri-Clamp Valve Ferrules - All Speidel tanks come configured for use with Tri-Clamp (TC) style valves and fittings. Tanks up to 1600L capacity are outfitted for use with 1.5 in TC. Other sizes and custom configurations are available at additional cost upon request. **Please Note: TC valves not included. Please inquire with your sales associate for pricing on TC valves and fittings. Rubber Lid Gaskets - Rubber gaskets are much thicker than the traditional clear vinyl gaskets, which along with their extruded manufacturing process provide a much better seal with the tanks wall. They're seamless and more oxygen resistant than the clear gaskets. That means better protection for your wines! Warranty - Speidel-Behaelter, GMBH backs up each and every tank with an industry-leading 25 year warranty against defects in materials or workmanship. And, as a 5th generation manufacturer, you can be confident they'll be around to honor that warranty should the need arise. Tank Features: Volume: Sealed, 1250 L. Open top, 1283 L Manway Jacket: 2.5 m² (4x 1" MPT connections) Complete Drainage Dish Bottom Reinforced Racking valve 2" TC connections Thermometer and Thermowell Combo included Sample Valve included Tank Dimensions: 1000mm D x 2135mm H (39.3" D x 84" H)

Read more less

High-quality stainless steel fermentation and storage tank Gasketed lid creates an airtight seal of long-term storage with no oxygen ingress Impeccable 2R (IIId) surface finish for easy cleaning A versatile vessel that works perfectly for storing, mixing, fermenting, and transporting liquid Made in Germany by Speidel This new universal cask from Speidel is perfect for storing, mixing, fermenting, and transporting a variety of liquids.  These premium storage tanks have a gasketed lid for airtight storage, handles for easy moving, and fittings to add airlocks or taps as necessary.  These casks are made with Speidel's impeccable craftsmanship, meaning high quality 304 stainless steel construction with a IIId surface finish, insuring easy cleanup and a long service life. Great for storage of wine, cider, juice, kombucha, or whatever else you may be making in 25 gallon batches! Features: 304 SS construction IIId surface finish - easy cleanup 95 l (25.1 gal) volume Gasketed sealed tanks - no oxygen permeation during storage 68 cm (26.7") Height x 44 cm (17.3") Ø German quality construction with 25 year warranty Airlock hole with sealing cap in lid - use for storage or buy an airlock to use for fermenting

Read more less

Replacement Tie Rod / Level Indicator for 200L Speidel Braumeister. Note: This unit does not contain the temperature sensor that is in the new units, making it incompatible with new Braumeister units that came out in late 2020. Speidel Part Number: 77347

Read more less

Variable capacity tank well-suited for fermentation, wine aging, kombucha, pickling, and other applications Floating lid can be positioned as needed to match the volume of the liquid you're working with Proprietary rubber lid gasket allows for a superior seal compared to traditional gaskets, providing better protection for your wine Cooling jacket covers the entire tank of efficient glycol cooling Hand crank lifting arm for lowering and lifting the floating lid Swinging manway door for easy removal of grape skins Made in Germany by Speidel We are proud to present our line of premium quality stainless steel tanks. Built in Germany by Speidel, the world-class traditions of German engineering and craftsmanship are reflected in these tanks. And, after examining tanks built by every major manufacturer worldwide, we can safely say that when it comes to features, quality and price, these tanks represent the very best value available in stainless steel wine storage. Speidel Quality Features: Cooling Jacket - This tank is equipped with a max coverage jacket that covers all accessible areas of the tank and is designed for an operating pressure of 2.5 to 6 bar. This will allow you to hook it into a glycol system (see our Kreyer Chilly45, GLY410) for complete temperature control! Interior Finish - Speidel tanks feature an ultra-smooth 2R rated interior surface which effectively resists the build-up of tartrate residues. Clean your tanks with cold water after cold stabilization! Say goodbye to harsh cleaning chemicals and expensive CIP systems! Weld Quality - Speidel's robotic-arm laser welders create flawless stainless to stainless junctions that look and feel more like a taped fabric seam than a traditional weld. Ultra high-quality welds leave no chance for residual product to harbor spoilage organisms. Thickness - Speidel tanks are designed to be the correct thickness for the tank's total volume. Manway - The "red wine" manway allows you to easily remove skins. Complete Drainage Bottoms - All Speidel tanks are outfitted with conical, pocketed bottoms for total drainage, which maximizes product yield at rackings and makes cleaning a snap. *Please note that smaller, flat-bottomed tanks do not feature total drainage bottoms. Tri-Clamp Valve Ferrules - All Speidel tanks come configured for use with Tri-Clamp (TC) style valves and fittings. Tanks up to 1600L capacity are outfitted for use with 1.5in TC. Other sizes and custom configurations are available at additional cost upon request. **Please Note: TC valves not included. Please inquire with your sales associate for pricing on TC valves and fittings. Rubber Lid Gaskets - The white rubber gaskets used by Speidel are much thicker than the traditional clear vinyl gaskets, which along with their extruded manufacturing process provide a much better seal with the tanks wall. They're seamless and more oxygen resistant than the clear gaskets. That means better protection for your wines! Warranty - Speidel-Behaelter, GMBH backs up each and every tank with an industry-leading 25 year warranty against defects in materials or workmanship. And, as a 5th generation manufacturer, you can be confident they'll be around to honor that warranty should the need arise. Tank Features: Volume: Sealed, 2237 L. Open top, 2344 L Variable Capacity Tank includes Floating lid and Heavy Duty White Rubber Gasket Large Manway Max Coverage Jacket: 3.2 m² (4x 1" MPT connections) Complete Drainage Dish Bottom Sight Gauge Lifting Arm with Winch Extended Legs - bottom dump port located 16" off the ground Reinforced Racking valve 2" TC connections Thermometer and Thermowell Combo included Sample Valve included Tank Dimensions: 1480mm D x 2009mm H (58.2" D x 79" H) With Lifting Arm: 2560mm H (100.7" H) Note: Over tightening the airlock / orange bulk head can cause it to crack. Only thread the airlock down until it feels snug. Do not over tighten.

Read more less

Stainless steel pump assembly for any variable volume fermenter. Includes built-in gauge and line to connect with gasket, but does not include gasket. Made by Speidel of Germany, this stainless pump is made to a higher quality than comparable replacment pumps made in Italy. 

Read more less

A stainless platform designed for the full malt pipe to be lowered onto it and rolled to a point of disposal. Extremely convenient for large batches. Specifically sized to the 500l Brau, this unit is equipped with sturdy wheels, designed to make mash disposal that much easier!

Read more less

Help retain heat with Speidel's insulating jacket for the 200L Braumeister.

Read more less

Variable capacity tank well-suited for fermentation, wine aging, kombucha, pickling, and other applications Floating lid can be positioned as needed to match the volume of the liquid you're working with Proprietary rubber lid gasket allows for a superior seal compared to traditional gaskets, providing better protection for your wine Made from 304 stainless steel with ultra-high-quality laser welds 2R rated interior finish resists residue build-up and is easy to clean Air pump with pressure gauge, airlock, and ball valve included Made in Germany by Speidel We are proud to offer our small Variable Volume Tanks from Speidel - a German manufacturer of premium quality stainless steel tanks for the wine industry. The tank body is fabricated from 304-type stainless steel, while the floating lid is made from 316-type stainless and has an inflatable bladder that pumps up to seal the wine off at any volume level. They can be used for primary fermentation as well as aging. Built in Germany by Speidel, the world-class traditions of German engineering and craftsmanship are reflected in these tanks. And, after examining tanks built by every major manufacturer worldwide, we can safely say that when it comes to features, quality and price, these tanks represent the very best value available in stainless steel wine storage. These tanks arrive to you complete and ready to go out of the box after a little assembly. The tanks are fitted with 1/2 inch threaded ports to accomodate the included 1/2 inch stainless steel ball valve and 1/2 inch stainless plug. The plugged port is intended for use with an optional thermometer (MT512). Speidel Quality Features: Rubber Lid Gaskets: Rubber gaskets are much thicker than the traditional clear vinyl gaskets, which along with their extruded manufacturing process provide a much better seal with the tanks wall. They're seamless and more oxygen resistant than the clear gaskets. That means better protection for your wines! Weld Quality - Speidel's robotic-arm laser welders create flawless stainless to stainless junctions that look and feel more like a taped fabric seam than a traditional weld. Ultra high-quality welds leave no chance for residual product to harbor spoilage organisms. Interior Finish - Speidel tanks feature an ultra-smooth 2R rated interior surface which effectively resists the build-up of tartarate residues. Clean your tanks with cold water after cold stabilization! Say goodbye to harsh cleaning chemicals and expensive CIP systems! Warranty - Speidel-Behaelter, GmbH backs up each and every tank with an industry-leading 25 year warranty against defects in materials or workmanship. And, as a 5th generation manufacturer, you can be confident they'll be around to honor that warranty should the need arise. Tank Dimensions: 440mm D x 765mm H (17.3" D x 30.1" H) Note: Over tightening the airlock / orange bulk head can cause it to crack. Only thread the airlock down until it feels snug. Do not over tighten.

Read more less

Expertly crafted stainless steel fruit press made by the original manufacturer of the bladder press Features a slotted screen which mirrors commercial press designs Higher juice yield (65-70%) compared to other press models Can be used with any domestic water supply that provides at least 36 psi of pressure Easy to clean after use—simply spray down with a hose and towel dry Made in Germany by Speidel Speidel was the original manufacturer of the bladder press. While similar to the Italian models in operation, Speidel offers a few quality upgrades. To obtain a better press Speidel uses a slotted screen, similar to what is offered on large commercial presses, instead of a screen with circular perforations. Speidel presses also offer superior hardware and a recessed valve assembly (to reduce accidental breakage). Compared to other presses, the Speidel hydro press has a higher juice yield (~65-70%) and works completely without electricity and with minimal effort. This press can be used with any domestic water supply the provides at least 2.5 bar (36 psi) of pressure. Pressing pressure and pressing time is simply regulated by the water flow. These units are extremely easy to care for and can be cleaned quickly by simply spraying it down with a hose after use. You will find the quality you'd expect from a product that is 100% German-made. Speidel has been shifting their bladder presses from painted to all stainless, and we're pretty excited about it. Although the orange painted versions have their own aesthetic appeal, nothing beats the performance and practicality of stainless steel. Stainless is much easier to clean and much more resistant to rust. The painted versions are likely to chip over time through normal wear and tear, creating small crevasses for bacteria to call home. No such worries when working this beautiful, brushed stainless press. Overall height is 33" and outlet height is 12". A press cycle for this unit averages around 35 minutes. Includes: Complete press assembly Inner mesh bag (to keep fruit from getting in the stainless basket and make cleanup easier) Plastic "spray-protection bag" to keep juice from squirting out Fittings to connect garden hose Instruction manual Presses ship in a corrugated box. Minor assembly (attaching legs) is required before use 1 Year Warranty on all parts! FAQ: Can the press be operated with air pressure? No. These are hydraulic presses that may only be operated with water. When operating with compressed air, there is a risk of explosion and a very high risk of injury if the membrane bursts due to excess pressure or damage. Is a minimum water pressure required? In order to ensure the function and the best possible yield, there should be a minimum water pressure of 2-2.5 bar on the press. What if the water supply delivers more than 3 bar? In principle, this is not a problem, as if the water pressure inside the press exceeds 3 bar, the pressure relief valve opens and there is no pressure-related damage. How many apples make how much juice? On average, 50kg (110 lbs) of apples produce around 30-35L (8-9 gal) of juice, depending on the variety and quality of the apples.  

Read more less

Variable capacity tank well-suited for fermentation, wine aging, kombucha, pickling, and other applications Floating lid can be positioned as needed to match the volume of the liquid you're working with Proprietary rubber lid gasket allows for a superior seal compared to traditional gaskets, providing better protection for your wine Made from 304 stainless steel with ultra-high-quality laser welds 2R rated interior finish resists residue build-up and is easy to clean Air pump with pressure gauge, airlock, and ball valve included Made in Germany by Speidel We are proud to offer our small Variable Volume Tanks from Speidel - a German manufacturer of premium quality stainless steel tanks for the wine industry. The tank body is fabricated from 304-type stainless steel, while the floating lid is made from 316-type stainless and has an inflatable bladder that pumps up to seal the wine off at any volume level. They can be used for primary fermentation as well as aging. Built in Germany by Speidel, the world-class traditions of German engineering and craftsmanship are reflected in these tanks. And, after examining tanks built by every major manufacturer worldwide, we can safely say that when it comes to features, quality and price, these tanks represent the very best value available in stainless steel wine storage. These tanks arrive to you complete and ready to go out of the box after a little assembly. The tanks are fitted with 1/2 inch threaded ports to accomodate the included 1/2 inch stainless steel ball valve and 1/2 inch stainless plug. The plugged port is intended for use with an optional thermometer (MT512). Speidel Quality Features: Rubber Lid Gaskets: Rubber gaskets are much thicker than the traditional clear vinyl gaskets, which along with their extruded manufacturing process provide a much better seal with the tanks wall. They're seamless and more oxygen resistant than the clear gaskets. That means better protection for your wines! Weld Quality - Speidel's robotic-arm laser welders create flawless stainless to stainless junctions that look and feel more like a taped fabric seam than a traditional weld. Ultra high-quality welds leave no chance for residual product to harbor spoilage organisms. Interior Finish - Speidel tanks feature an ultra-smooth 2R rated interior surface which effectively resists the build-up of tartarate residues. Clean your tanks with cold water after cold stabilization! Say goodbye to harsh cleaning chemicals and expensive CIP systems! Warranty - Speidel-Behaelter, GmbH backs up each and every tank with an industry-leading 25 year warranty against defects in materials or workmanship. And, as a 5th generation manufacturer, you can be confident they'll be around to honor that warranty should the need arise. Tank Dimensions: 440mm D x 765mm H (17.3" D x 30.1" H) Note: Over tightening the airlock / orange bulk head can cause it to crack. Only thread the airlock down until it feels snug. Do not over tighten.

Read more less

Variable capacity tank well-suited for fermentation, wine aging, kombucha, pickling, and other applications Floating lid can be positioned as needed to match the volume of the liquid you're working with Proprietary rubber lid gasket allows for a superior seal compared to traditional gaskets, providing better protection for your wine Made from 304 stainless steel with ultra-high-quality laser welds 2R rated interior finish resists residue build-up and is easy to clean Air pump with pressure gauge, airlock, and ball valve included Made in Germany by Speidel We are proud to offer our small Variable Volume Tanks from Speidel - a German manufacturer of premium quality stainless steel tanks for the wine industry. The tank body is fabricated from 304-type stainless steel, while the floating lid is made from 316-type stainless and has an inflatable bladder that pumps up to seal the wine off at any volume level. They can be used for primary fermentation as well as aging. Built in Germany by Speidel, the world-class traditions of German engineering and craftsmanship are reflected in these tanks. And, after examining tanks built by every major manufacturer worldwide, we can safely say that when it comes to features, quality and price, these tanks represent the very best value available in stainless steel wine storage. These tanks arrive to you complete and ready to go out of the box after a little assembly. The tanks are fitted with 1/2 inch threaded ports to accomodate the included 1/2 inch stainless steel ball valve and 1/2 inch stainless plug. The plugged port is intended for use with an optional thermometer (MT514). Also compatible with shielded thermowell for digital temperature controller probes (FE62). Speidel Quality Features: Rubber Lid Gaskets: Rubber gaskets are much thicker than the traditional clear vinyl gaskets, which along with their extruded manufacturing process provide a much better seal with the tanks wall. They're seamless and more oxygen resistant than the clear gaskets. That means better protection for your wines! Weld Quality - Speidel's robotic-arm laser welders create flawless stainless to stainless junctions that look and feel more like a taped fabric seam than a traditional weld. Ultra high-quality welds leave no chance for residual product to harbor spoilage organisms. Interior Finish - Speidel tanks feature an ultra-smooth 2R rated interior surface which effectively resists the build-up of tartarate residues. Clean your tanks with cold water after cold stabilization! Say goodbye to harsh cleaning chemicals and expensive CIP systems! Warranty - Speidel-Behaelter, GmbH backs up each and every tank with an industry-leading 25 year warranty against defects in materials or workmanship. And, as a 5th generation manufacturer, you can be confident they'll be around to honor that warranty should the need arise. Tank Dimensions - 550mm D x 999mm H (21.6" D x 39.3" H) Note: Over tightening the airlock / orange bulk head can cause it to crack. Only thread the airlock down until it feels snug. Do not over tighten.

Read more less

Speidel's BO style tank is a flat bottomed, variable volume tank for basic storage of wine. A no-frills tank that's just rock solid. For a pre-configured version of this tank style that can be pre-ordered for wine season please see our GER110VF, GER220VF, GER290VF and GER650VF tanks. Key Features Available from 110L to 1600L effective capacity. Stated tank volumes do not include the extra wall height needed to secure the lid when the tank is full. Tanks can contain their stated volume of wine. Up to 290L tanks have a 17mm wide lid flange, larger tanks have a 42mm flange 110L & 220L tanks have 3/4" female BSP bottom port, 290L, 650L, 1100L, & 1600L Tanks have 1" male BSP bottom port. Liter scale on tank exterior View the resource Note: Over tightening the airlock / orange bulk head can cause it to crack. Only thread the airlock down until it feels snug. Do not over tighten.

Read more less

Variable capacity tank well-suited for fermentation, wine aging, kombucha, pickling, and other applications Floating lid can be positioned as needed to match the volume of the liquid you're working with Proprietary rubber lid gasket allows for a superior seal compared to traditional gaskets, providing better protection for your wine Made from 304 stainless steel with ultra-high-quality laser welds 2R rated interior finish resists residue build-up and is easy to clean Air pump with pressure gauge, airlock, and ball valve included Made in Germany by Speidel We are proud to offer our small Variable Volume Tanks from Speidel - a German manufacturer of premium quality stainless steel tanks for the wine industry. The tank body is fabricated from 304-type stainless steel, while the floating lid is made from 316-type stainless and has an inflatable bladder that pumps up to seal the wine off at any volume level. They can be used for primary fermentation as well as aging. Built in Germany by Speidel, the world-class traditions of German engineering and craftsmanship are reflected in these tanks. And, after examining tanks built by every major manufacturer worldwide, we can safely say that when it comes to features, quality and price, these tanks represent the very best value available in stainless steel wine storage. These tanks arrive to you complete and ready to go out of the box after a little assembly. The tanks are fitted with 1/2 inch threaded ports to accomodate the included 1/2 inch stainless steel ball valve and 1/2 inch stainless plug. The plugged port is intended for use with an optional thermometer (MT514). Also compatible with shielded thermowell for digital temperature controller probes (FE62). Speidel Quality Features: Rubber Lid Gaskets: Rubber gaskets are much thicker than the traditional clear vinyl gaskets, which along with their extruded manufacturing process provide a much better seal with the tanks wall. They're seamless and more oxygen resistant than the clear gaskets. That means better protection for your wines! Weld Quality - Speidel's robotic-arm laser welders create flawless stainless to stainless junctions that look and feel more like a taped fabric seam than a traditional weld. Ultra high-quality welds leave no chance for residual product to harbor spoilage organisms. Interior Finish - Speidel tanks feature an ultra-smooth 2R rated interior surface which effectively resists the build-up of tartarate residues. Clean your tanks with cold water after cold stabilization! Say goodbye to harsh cleaning chemicals and expensive CIP systems! Warranty - Speidel-Behaelter, GmbH backs up each and every tank with an industry-leading 25 year warranty against defects in materials or workmanship. And, as a 5th generation manufacturer, you can be confident they'll be around to honor that warranty should the need arise. Tank Dimensions - 550mm D x 999mm H (21.6" D x 39.3" H) Note: Over tightening the airlock / orange bulk head can cause it to crack. Only thread the airlock down until it feels snug. Do not over tighten.

Read more less

High-quality stainless steel fermentation and storage tank Gasketed lid creates an airtight seal of long-term storage with no oxygen ingress Impeccable 2R (IIId) surface finish for easy cleaning A versatile vessel that works perfectly for storing, mixing, fermenting, and transporting liquid Made in Germany by Speidel This new universal cask from Speidel is perfect for storing, mixing, fermenting, and transporting a variety of liquids.  These premium storage tanks have a gasketed lid for airtight storage, handles for easy moving, and fittings to add airlocks or taps as necessary.  These casks are made with Speidel's impeccable craftsmanship, meaning high quality 304 stainless steel construction with a IIId surface finish, insuring easy cleanup and a long service life. Features: 304 SS construction IIId surface finish - easy cleanup 15 l (3.9 gal) volume Gasketed sealed tanks - no oxygen permeation during storage 35.2 cm (13.9") Height x 28 cm (11") Ø German quality construction with 25 year warranty Airlock hole with sealing cap in lid - use for storage or buy an airlock to use for fermenting  

Read more less