25% Off
-
Stainless Steel Quick Disconnect (QD) - Female QD x 1/2 in. Barb
Made by MoreBeer! from 304 stainless steel. This quick disconnect seals up very well without a lot of work in connecting them. This will work with any of our H503 and H507 series of quick disconnects. However, it does not work in conjunction with any of our plastic or brass quick disconnects. These feature a 1/2" Barb on the ends for easy connectivity to any 1/2" tubing you may have. The quick disconnect will hold pressure for typical brewing applications when moving liquids at 60psi or less. 3/8" ID. Gasket temperature range is -40° to 250° F. Open port, does not have shut-off. We designed the original stainless QD's for the brewing industry over 10 years ago. The same manufacturer has been machining them for us ever since. The design has certainly been copied but not with consistent quality. That is why MoreBeer! Stainless QD fittings have a near unanimous 5 star review. Please Note: This product will NOT work with our Brass or Plastic Quick Disconnects.
$18.99 $14.24
-
Coriander Seed (Whole)
For a traditional Belgian witbier, freshly ground coriander seed is a must. Great when combined with orange peel. To use, grind whole coriander seeds in a spice grinder or with a mortar and pestle. Add 1/2 to 1 oz per 5 gallons of wort during the last 5 minutes of the boil.
$1.99 - $8.99
-
Stainless Steel Quick Disconnect (QD) - Male QD x 1/2 in. MPT
Quickly and easily connect and disconnect your brew tubing from kettles, pumps and fermenters without fiddling with hose clamps or trying to muscle the tubing on and off of barbed fittings! There’s no need to put in a lot of work connecting when using this MPT Stainless Steel Male Quick Disconnect with the female QD, as they seal-up quickly. This part works well with any of our H503 and H507 series of quick disconnects, but should only be used with other 304 stainless steel models. Features a 1/2" Male National Pipe Thread on the outer ends that offers easy connectivity to just about anything. The quick disconnect will hold pressure for most brewing applications if you plan on moving liquids at 60psi or less. 1/2" ID. Take note this is an open port model with no shut-off. We designed the original stainless QD's for the brewing industry over a decade ago, and have been using the same reliable manufacturer ever since. Our design has certainly been imitated but has never duplicated at the same quality level. It’s no surprise MoreBeer! Stainless QD fittings have an almost unanimous 5 star customer rating! Made by MoreBeer! from 304 stainless steel. Please Note: This product does NOT work with our Brass or Plastic Quick Disconnects.
$13.49 $10.12
-
BrewZilla Neoprene Jacket | 65L | Gen 3.1.1 & Older | DigiBoil Compatible | Improves Heating Times | Reduces Heat Loss | Removable for Faster Chilling
Add this neoprene jacket to your BrewZilla or DigiBoil to speed up heating! Heating is 10% faster and heat loss from the boiler is reduced by 50% Remove the jacket after the boil to speed up chilling Thick, insulating neoprene is secured to the boiler body with a sewn-on hook and loop fastener strap Add some insulation to your BrewZilla or DigiBoil to get better boils! This jacket will fit all 65 L sizes and help keep the heat in for quicker and more vigorous boils. Slap it on to speed up heating; take it off to speed up chilling. This jacket will fit Gen 3.1.1 and older BrewZilla models. It is not compatible with Gen 4 BrewZillas. Features: 10% faster heat up time 50% less heat loss from boiler Fits the 65L Brewzilla and DigiBoil Left cut out for the valve Right cut out for the bottom handle Made from thick neoprene, which is easy to wash after use Kegland Part Number: KL08921
$32.99 $24.74
-
Farro Glass | Glass Carboy | Wide Mouth | Carrying Harness | Ported w/ Spigot
Wide mouth carboys are the easiest glass fermenter to clean with plenty of room to get your arm inside to scrub Add bagged flavoring additions and remove them freely when finished—this can be nearly impossible with traditional narrow neck glass carboys Watch fermentation activity as it's happening! The ultimate advantage of translucent glass or plastic fermenters Ported lid with removable cap sized for a #5 stopper & airlock Carrying harness included for easier handling Glass carboys have been a staple of the brewing and winemaking world for generations, but traditional tight neck carboys aren't without their limitations. Standard glass carboys can be difficult to clean after fermentation and require a siphon or racking cane to transfer liquid out. The wide mouth carboy is extremely easy to clean—simply removing the lid allows you to get your hand or arm all the way inside to scrub away stubborn sediment. And with a convenient spigot at the bottom, you can transfer liquid out of the vessel with ease. Each carboy comes with a carrying harness. See below for optional stainless steel spigots. Features: Gasketed lid for tight seal Included carrying harness Ported lid ready for #5 stopper & airlock Plastic spigot with 3/8" OD barb (tapers from 10-12mm) 20mm (0.78") diameter spigot hole 165mm (6.5") lid opening Continuous thread, 5mm pitch Please note: The carrying harness should not be used to move the vessel when full. The airlock lid is primarily recommended for short fermentations.
$20.24 - $69.99
-
Stainless Steel Quick Disconnect (QD) - Female QD x 1/2 in. FPT
To upgrade your brew system, and make your life easier, thread these QD’s on your kettle, mash-tun, pump and chiller! When used with the male QD, they seal up very well in either flow direction. They will save you time and prevent messes. Just get several silicone hoses of various lengths and put barbed male fittings on either end. Then use them wherever you need to in your system! They are so much easier to use than pushing and pulling the hoses off of barbs. It makes things interchangeable for cleaning, and provides quick installation and removal. MoreBeer! designed the original stainless QD's for the brewing industry over 10 years ago. The same manufacturer has been machining them for us ever since. The design has certainly been copied but not with consistent quality. That is why MoreBeer! Stainless QD fittings have a near unanimous 5 star review. Please Note: This product will NOT work with our Brass or Plastic Quick Disconnects. This will work with any of our H503 and H507 series of quick disconnects. These feature a 1/2" Female National Pipe Thread on the end for easy connectivity to almost anything. The quick disconnect will hold pressure for typical brewing applications when moving liquids at 60 psi or less. 1/2" ID. Gasket temperature range is -40° to 250° F. Open port, does not have shut-off.
$18.99 $14.24
-
Stainless Bulkhead - 1/2 in. FPT x 1/2 in. MPT
This stainless steel bulkhead is 1/2" FPT x 1/2" MPT with a flat, thick rubber washer that makes is very easy to install on most kettles. We use this bulkhead on our weldless spigot. You will need to drill a 1" hole to install the bulkhead.
$18.99 $14.24
-
Stainless Tee - 1/2 in. FPT
With three places to attach tubing and accessories, this tee gives you the ability to customise your brewing setup. 304 Stainless, 1/2" Female Pipe Thread on all three openings. 2" length x 1.5" width
$6.09 $4.57
-
BrewBuilt® SlingBlade Electric Heating Element (240V)
The BrewBuilt SlingBlade is an innovative electric heating element designed to promote a rolling boil and even heat distribution. Shaped for Performance and Convenience The SlingBlade's unique crescent-shaped design positions all of the heating power on one side of the kettle, sending thermal energy upward to the surface that then cascades downward on the opposite side of the kettle. This movement creates a dynamic turbulence that evenly distributes heat while creating a vigorous, rolling boil. Other heating elements stick right out into the middle of the kettle or use a full circle design that rings the kettle wall. This can cause an obstruction for immersion chillers or make it difficult to stir without banging into the element. The SlingBlade was designed to avoid these issues. By remaining on one side of the kettle, the element will be out of the way of your immersion chiller, and since the element follows the curvature of the kettle wall, it won't interfere with the flow of wort during whirlpool. Ultra-Low Watt Density An electric element transfers power to your wort by applying heat, but if this heat is too concentrated you will get local heating that is hotter than 212°F. This catalyzes Maillard Reactions, which can lead to darker beer than intended and produce unwanted caramelization. Think of these reactions like roasting a marshmallow. First it gets a light brown, we call this Maillard reactions, a little hotter and it gets a dark brown, we call this caramelization, then it turns black and we call this pyrolysis (burnt or scorched). While all kettles undergo these reactions, an electric element can concentrate more heat into a small area, which can quickly scorch your wort. Our experience is that at 90-watts per square inch recipes need to be modified to account for the element and light beers never come out quite right. The SlingBlade element was designed at 50-watts per square inch to reduce the chance of scorching while still providing a vigorous boil. For even lower watt density, consider the Boil Vigor Controller. Tri-Clamp Connection The SlingBlade installs quickly and easily on any kettle with a T.C. ferrule thanks to the curved, non-circular design. This also makes it a breeze to remove the element for cleaning between uses. The SlingBlade heating elements were designed to fit perfectly with BrewBuilt brewing kettles, but you may find them suitable for other kettles as well. They should be used with T.C. ferrules no longer than 1" in length. For dimensions and recommended minimum kettle diameter, please see the chart below. Features: Made from Incoloy alloy with proprietary coating for long life 1.5" Tri-Clamp connection Unique offset design promotes rolling boil Ultra-Low Watt Density eliminates scorching UL Certified components Specs: 240 Volt L6-30 plug 20 Amp breaker required for 10 & 15 gal element 30 Amp breaker required for 22 & 31 gal element 50-gallon kettle requires 2 x BE538 and 2 x 30 amp circuits SKU Kettle Vol. Wattage Length Radius Min. Kettle Ø BE535 10 gal 3750 13.25" 6.3" 13.78" BE536 15 gal 4500 16.75" 7.3" 15.75" BE537 22 gal 5000 17.25" 8.3" 17.72" BE538 31 gal 5750 19.5" 9.3" 19.69" Please note: Length is measured from the tip of the heating element to the T.C. connection. Radius is measured from the middle of the T.C. connection to the outermost edge of the element's curve. ***In order to avoid injury or death we strongly recommend using a GFCI in any circuit used near water. You can find one here.*** Lowest Price Guarantee, this item has MAP pricing so you can be confident you won't find it for less.
$89.99 - $299.99
-
Stainless Barb - 1/2 in. MPT x 5/8 in. (1/2 in. ID)
Use this barbed fitting with our 1/2" ID Silicone tubing for a better fit. Because Silicone tubing is soft and flexible it actually fits much better on this over sized 5/8" OD barb than on a 1/2" OD barb. Designed and made by MoreBeer! to maximize flow this fitting is also perfect for use when a March or Chugger High-Flow pump as it allows a larger volume of wort to enter the pump, decreasing instances of cavitation. Please note: If using 1/2" ID vinyl tubing, we recommend using hot water to heat the tubing up for easier insertion. Not recommended for use with thick wall 1/2" vinyl tubing.
$7.19 $5.39
-
Five Star | PBW Tablets | 10 g
The same cleaning product that brewers love, conveniently pre-measured into dissolvable tablets. PBW (Powder Brewery Wash) is a non-hazardous buffered alkaline brewer cleaner. It's the cleaner of choice for many breweries, where it out performs more hazardous caustic chemicals without removing the flesh off your bones. PBW also will not corrode soft metals. It's effectiveness and ease of use has made it a go-to cleaning chemical for pros and home brewers alike. 10 g tablets are recommended for kegs, fermenters, and carboys. Use 1 tablet per 1 gallon of water. Also available in 2.5 g tablets, which are recommended for growlers, spray bottles, and glassware.
$8.99 - $18.69
-
Pop Cultures | PopTops™ Swing Top Bottles | Amber Glass Bottles | 16 oz | Case of 12
No capper required! Make your bottling day easier by skipping the capping step all together The perfect bottle for a wide range of homemade beverages including beer, cider, mead, kombucha, and more! Pressure rated to 100 PSI which means they can easily handle the carbonation of soda pop and hard seltzer Pop Cultures is helping people experience the joy and satisfaction of making and sharing homemade creations Swing top closures are included, reusable, and can be replaced as needed PopTops™ Swing Top Bottles from Pop Cultures provide the best of both worlds when it comes to bottling! They provide the ease and flexibility of flip top bottles, with the added ability to cap for shelf stability. These attractive and robust bottles are ideal for whatever beverage tickles your fancy. Whether you got hooch, booch or beer, it's all good in here. No capper or additional equipment required when using the swing tops. Resealable, reusable and recyclable (though you will never want to get rid of these bottles!). Bottles rated to 100 PSI. Case QTY: 12 Pallet QTY: 112 cases Case of 12 x 16 oz Amber Pop Tops Bottles with Swing Tops. Crown Caps not included (see recommended items below for options).
$33.74 - $2,199.99
-
Kegmenter Fermentation Keg - 7.6 gal.
Want an easy-to-use, stainless vessel that ferments and carbonates? This 29L/7.6 Gallon keg has been modified to allow you to do both! The top is fitted with a large 4 inch tri-clamp lid with two ball lock posts and a pressure relief valve. You can use this vessel to ferment, carbonate, serve, or push the beer through a filter. The posts are recessed which allows you to stack these kegs up to 4 high. A 4" T.C. end cap with pre drilled hole is also available (H691), which can be paired with a #3 stopper and airlock. Also consider the Kegmenter Hop Bong Pressure Pack which allows for oxygen-free dry hopping and also features ball lock posts for Gas & Liquid. Depending on how long it will take to consume the finished beer, we recommend using two kegmenters, one for fermentation and one for carbonating and serving. After fermentation, there will be a large trub cake at the bottom of the vessel. Leaving finished beer on the trub for too long (2-3 weeks) may eventually lead to off-flavors. Check out our ball lock jumper line (KEG575) to easily transfer from one kegmenter to the other. Also consider our beer filter kit (FIL40), which will allow you to filter the beer during transfer. Features: Rated up to 2.5 BAR (36 psi) 4" T.C. lid with ball lock posts Floating dip tube Stainless steel 1.8 mm thick Use: As a stainless steel fermenter that is easy to clean Great choice for 5 gallon fermentations Easy to pressurize the kegmenter after fermentation to push through a filter and into another keg Fermenting under pressure, allowing CO2 to exit via the relief valve, reduces esters and fusel alcohol production allowing you to ferment at warmer temperatures Distillation - with the addition of a T.C. reducer and condenser (H701 / DS120 / DS130) As a cellar keg for topping up barrels Warning: Always depressurize keg before removing lid. Does not include spunding valve shown in example photo. Please see FIL42A. Kegland Part number: KL05906
$274.99 $206.24
-
Insulated Cooler Mash Tun | Hot Liquor Tank | 14 gal.
If you're ready to step up to all grain brewing, this converted insulated cooler works wonders as a mash tun! The 14-gallon size can hold upwards of 25 lbs of grain, so there's plenty of room for even the strongest 5-gallon beer recipes and is perfect for most 10 gallon batches up to 1.070 SG. Comes pre-assembled with stainless steel perforated false bottom, high temperature silicone tubing, and 1/2" female threaded ball valve. Pair the valve with the male threaded fitting (plus a little plumber's tape) that best suits your setup and you'll off and running. The cooler also works perfectly as a Hot Liquor Tank. Use with the false bottom in place, or simply remove it and keep it on hand in case you decide to use the cooler as a Mash Tun down the road. Two of these coolers plus the Fermentap Sparge Arm Assembly work perfectly as a gravity fed all-grain setup. To connect the cooler's ball valve to the sparge arm assembly, we recommend a 1/2" MPT x 3/8" Barb fitting and 3/8" ID silicone tubing. Plumber's tape will ensure you have a leak-proof connection between the barb fitting and the ball valve. Includes: Insulated beverage cooler Max Volume: 14.7 Gal (56 L) Stainless dome-shaped perforated false bottom High temperature silicone tubing Stainless 1/2" BSP ball valve External Dimensions: Approx. 19" L x 19" W x 22" H KegLand Part Number: KL04671 Please note: the mash tun may come with a little extra silicone tubing than what's needed. Check that your false bottom is sitting flat and in the middle of the cooler and cut off excess tubing if needed.
$175.99 $131.99
-
Sour Malt | Acidulated Malt | IREKS Malt
Contains up to 4.5% natural lactic acid to precisely adjust mash pH, promoting enhanced enzyme activity By optimizing mash pH, this acidulated malt directly contributes to a higher brewhouse yield Use as up to 5% of your grain bill IREKS Sour Malt, also known as acidulated malt or saurmaltz, with its natural lactic acid content of up to 4.5% is an excellent solution for precisely adjusting mash pH. Compared to typical sour malts, IREKS contains roughly double the lactic acid, allowing you to use as little as half the amount to achieve the same results. This optimization directly supports enhanced enzyme activity, leading to a higher brewhouse yield. The ideal addition rate of IREKS Sour Malt will vary for each brewery. Factors such as brewing water quality, mashing schedule, and grist composition all influence the precise amount needed for optimal results. Comparable to Weyermann Acidulated Malt, but IREKS Sour Malt has a much higher lactic acid content of up to 4.5% rather than the 1-2% of the Weyermann. IREKS Sour Malt is able to achieve the same pH adjustment with less usage in the overall grain bill. Malt Specification: Color °L - 0.9-2.3 Moisture % - max. 8.0 pH Value - 3.35-3.70 Usage Rate - Up to 5%
$2.99 - $41.24
-
Carbonation Drops | 250 g | Approx. 70 Drops
Fast and easy carbonation for your beer or cider Avoid the tedious, sticky process of spooning sugar into every bottle Eliminate the risk of oxidizing your favorite brew that often comes with batch priming Skip the sugar mess and the tedious measuring. With carbonation drops, bottle conditioning your beer or cider is as easy as "drop, seal, and sip." They deliver the perfect dose every time, protecting your brew from the risk of oxidation that comes with batch priming. Dosage Rate: 12 oz Bottle - 1 Drop 22 oz Bottle - 2 Drops KegLand Part Number: KL38461
$5.49 $4.12
-
Five Star | PBW Tablets | 2.5 g
The same cleaning product that brewers love, conveniently pre-measured into dissolvable tablets. PBW (Powder Brewery Wash) is a non-hazardous buffered alkaline brewer cleaner. It's the cleaner of choice for many breweries, where it out performs more hazardous caustic chemicals without removing the flesh off your bones. PBW also will not corrode soft metals. It's effectiveness and ease of use has made it a go-to cleaning chemical for pros and home brewers alike. 2.5 g tablets are recommended for growlers, spray bottles, and glassware. Use 1 tablet per 32 oz of water. Also available in 10 g tablets, which are recommended for kegs, fermenters, and carboys.
$8.99 - $12.74
-
DigiMash Upgrade Kit for 65L DigiBoil
Ready to upgrade your DigiBoil into a DigiMash? With the DigiMash upgrade kit you can convert the DigiBoil into a full blown electric all-in-one system. Includes false bottom, malt pipe with bottom screen, wire support, and malt pipe handle. Simply place the false bottom inside the kettle and install the malt pipe, fill with water and heat to your desired strike temperature, then add your grain and set your desired mash temperture on the digital controller. Once your mash is complete, lift up the malt pipe, drain the wort and sparge, then remove the malt pipe and proceed to boil. Includes: False bottom Malt pipe Wire support Malt pipe handle Malt pipe bottom screen Installation & Use: Place the false bottom inside the kettle Install the wire support in the channel located at the top of the kettle Place the mesh screen inside the malt pipe and attach the handle Lower the malt pipe into the kettle so it rests on the wire support Fill with strike water and heat to desired strike temperature When desired temperature is reached, add grain and stir until well mixed When your mash is complete, use the handle to lift out malt pipe and rotate 90° so the malt pipe feet sit on the wire support Allow the wort to drain into the kettle and sparge the grain with warm water (165-175°F) When you're done collecting your wort, remove the malt pipe and proceed to boil Please note: only the 500-watt element should be used to increase mash temperatures when the Malt Pipe is in place. Using the higher watt element(s) with the Malt Pipe inserted may cause scorching of the grain. Kegland Part Number: KL13055
$149.99 $112.49
-
BrewBuilt® 1.5" Tri-Clamp Blowoff U Barb
The BrewBuilt Blowoff U Barb was specifically designed to avoid kinking issues with blowoff tubing. Rather than simply pointing the blowoff tubing away from the conical, the U Barb bends outward and over the side of your conical to point tubing straight down. This gives you the same advantage of a stainless steel blowoff cane, but is much easier to clean and sanitize. The 5/8" OD barb is perfect for forming a tight seal with 1/2" ID silicone tubing. Measures approximately 4" from T.C. to barb. 1.5" T.C. 5/8" OD barb Made from 304 stainless steel
$29.99 $22.49
-
Stainless Tri-Clamp - 3/4 in. MPT x 1.5 in. T.C.
Convert 1.5" Tri-Clover to 3/4" Male Pipe Thread. 304-Type Stainless steel.
$17.99 $13.49
-
Carboy Handle - Threaded Neck Carboys
A new carboy handle in distinctive blue color that fits our threaded neck 6.5 gal carboys.
$8.99 $6.74
-
Ripple Electric Heating Element - 5500W / 240V
Ripple-style electric brewing heating element with 1.5" tri-clamp connection. With 5,500 watts of power, this unit will easily heat 20+ gallons of wort. Measures 4" wide and 14.5" from TC connection to tip of element. Specs: 5,500 watts 240 Volt L6-30 plug 30 Amp breaker required In order to avoid injury or death we strongly recommend using a GFCI in any circuit used near water. You can find one here.
$120.99 $90.74
-
Ss Brewtech T.C. Brewing Kettle
Ss BrewTech's T.C. brewing kettle is made from quality 304 stainless steel and can last you a lifetime of home brewing. This high-quality boil kettle features an aluminum core Tri-Clad bottom to foster even heating and minimize the risk of scorching and allow for the use of induction heating. Tri-Clamp ports have long been the standard in professional brewing, and for a good reason, they're quick, sturdy, and sanitary. The Ss T.C. Brew Kettle now brings this pro-level feature to the home brewer in an affordable package. The sturdy riveted silicone-coated handles are located on the front and back for easy moving and dumping of the kettle while also allowing for tighter brew stand setup. Just like the original Ss Brew Kettle, the T.C. version features an integrated trub dam into the dip tube to minimize the pickup of trub and hop material during knockout. The result is much clearer wort making its way into your fermenter. Features: Tri-Clad bottom Sanitary TC Ports Sturdy riveted silicone coated handles 3-piece TC ball valve with trub dam pick-up tube Lid designed to hang on side of handles Etched volume markings gals/liters Induction burner compatible Included Hardware: (2) TC Clamps (2) Silicone Clamp Gaskets 3-piece TC Ball Valve Dip Tube w/ Trub Dam Silicone Trub Dam Blade TC Port Plug Specs: Size Capacity Diameter Height 10 gal 10.7 gal 13.8" 16.5" 15 gal 15.7 gal 15.8" 18.9" 20 gal 22.7 gal 17.7" 21.3" 30 gal 31.1 gal 19.7" 23.7" 50 gal 53.0 gal 23.6" 28.3" Lowest Price Guarantee, this item has MAP pricing so you can be confident you won't find it for less.
$224.25 - $579.00
-
ForgeFit® Stainless Butterfly Valve | 1.5" T.C.
If you want to use the absolute best style of valve available to homebrewers, the butterfly valve is the clear choice. Brewers love butterfly valves because they are far and away the most sanitary option. Regular ball valves can trap small amounts of wort inside them, which inevitably leads to an infection that can sour your beer. That's why we always recommend breaking down your ball valves and cleaning them between uses. Butterfly valves have virtually nowhere for contaminants to hide and are easily cleaned in place. They also can be taken apart for a deeper cleaning if desired, although it's rarely necessary. This 1.5" Tri-Clamp Butterfly Valve features stainless steel construction and 7-position handle. The stainless steel handle can be rotated 180° for right or left hand operation. 1.5" tri-clamp Stainless steel handle 7 locking positions Squeeze trigger locking handle Made from 304 stainless steel ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.
$74.49 $55.87
-
Neoprene Jacket for BrewBuilt® X2 Uni Conical
Upgrade your base X2 Uni conical with a neoprene jacket to help insulate your fermentation and maintain stable temperatures. Not compatible with the X2 Jacketed Uni conical or X1 Uni conicals.
$38.99 - $73.09
-
Farro Glass | Premium Wine Bottles | Bellissima | Antique Green | 375mL | Case of 12
A slim, elegant bottle design ideal for dessert wines and ice wines Bellissima bottles are typically made in smaller volumes to package wines that are consumed in smaller pours Antique green glass color is often preferred for red wines to protect them from light during long term storage Farro Glass offers a full lineup of the most essential and commonly used bottles in winemaking Bellissima wine bottles are most commonly used for dessert wines and ice wines. The slim design lends an elegant appearance when this bottle appears at the end of your meal. They are typically half the volume of standard bottles, as a Bellissima's contents are often pricey and consumed in smaller pours. Volume: 375 mL Style: Bellissima Use: Sweet Red, Dessert Wine Color: Antique Green Finish: Cork Bottom: Punted Case QTY: 12 Pallet QTY: 150 cases Our Farro Glass Wine Bottles offers a full lineup of the most essential and commonly used bottles in winemaking. We scoured the world to find a bottle source that could provide a quality product consistently and at a fair price that we can pass on to our customers. If you've been searching for reasonably priced bottles that are reliably in stock, look no further.
$17.24 - $2,809.99
-
Red Reaper Counterflow Chiller | PEX / Copper Wort Chiller | 3/8" Barbs | 9.5mm Duotight Compatible
Counterflow design provides rapid, single-pass wort chilling Larger flow area minimizes hop clogs compared to plate chillers 9.5mm Duotight compatible inlet/outlets allow for quick and easy hose connections Durable PEX tubing resists high temperatures and pressures, extending the chiller's lifespan Tired of slow, inefficient wort chilling? Meet the Red Reaper Counterflow Chiller, your ultimate brewing ally. This isn't just another chiller; it's engineered for speed, durability, and hassle-free brewing. Unleash Rapid Cooling with Superior Design: Robust PEX/Copper Construction: Unlike standard clamped connections, the Red Reaper boasts PEX tubing swaged and soldered directly to the copper wort pipe. This innovative design guarantees a leak-proof, high-pressure connection, ensuring your cooling water stays where it belongs. Lightning-Fast Duotight Compatibility: Seamlessly connect your hoses and camlock fittings in seconds with the 9.5mm Duotight compatibility. Brew more, fuss less. Add the Duotight Push-In Thermowell Tee to add a thermometer to your wort out line. High-Efficiency Counterflow Design: Featuring an internal copper tube for wort circulation and an outer chamber for counterflowing cold water, the Red Reaper maximizes heat transfer for rapid chilling. Experience the power of single-pass cooling from boiling to pitching temperatures. Clog-Resistant Flow: Enjoy the benefits of a plate chiller's efficiency with a larger flow area that minimizes hop clogs. Built for Performance and Longevity: The Red Reaper utilizes the same pressure and temperature-resistant PEX hosing trusted in professional plumbing, offering exceptional flexibility and durability. We recommend recirculating your last 15 minutes of boil through the Red Reaper to sanitize it before chilling with cold water. Easy Cleaning and Maintenance: For optimal cleaning, circulate hot PBW for a minimum 5-minute contact time. Alternate flow direction for thorough cleaning, and rinse with water at the same temperature. Important Care Instructions: Avoid Sunlight: Prolonged exposure to sunlight can degrade the PEX tubing. No Acidic Cleaners: Do not store with StarSan or other acidic products, as they can damage the copper. What is PEX? PEX (cross-linked polyethylene) is a flexible, durable plastic tubing used as a reliable alternative to traditional copper or steel plumbing. Choose Your Fittings: The Red Reaper comes with bare, 3/8" barbs that you can simply clamp your tubing onto. However, we recommend using 9.5mm Duotight x 1/2" male thread adapters which will allow you to convert to your preferred fittings for the water and wort lines -- Camlock, Garden Hose, Tri-Clamp, Quick Disconnect (QD), etc. Specifications: 18.3 ft. Length 3/8" barb inlet/outlet 9.5mm Duotight compatible Rubber feet Hinged hanger (for BrewZilla handles) KegLand Part Number: KL3835
$172.99 $129.74
-
Horizontal Float Switch - 1.5 in. T.C.
Used on a commercial brewing system to shut off electricty or gas before the kettle runs dry. This horizontal float switch conveniently fits into a 1.5" tri-clamp port. It is designed to control the run-dry circuit in an electric brewing system. The contacts are intended to control a relay, contactor, or SSR and should not be used to interrupt full power to an electric element/burner. 50W. The unit is not fit to use on a circuit load, but suitable for signal output.
$131.99 $98.99
-
Replacement Fill Nozzle Assembly for Enolmatic Filler
Replaces the entire fill nozzle assembly on the WE620 Enolmatic Bottle filler, including the support arm and spring.
$87.99 $65.99
-
ForgeFit® Stainless Butterfly Valve | 2" T.C.
If you want to use the absolute best style of valve available to homebrewers, the butterfly valve is the clear choice. Brewers love butterfly valves because they are far and away the most sanitary option. Regular ball valves can trap small amounts of wort inside them, which inevitably leads to an infection that can sour your beer. That's why we always recommend breaking down your ball valves and cleaning them between uses. Butterfly valve have virtually nowhere for contaminants to hide and are easily cleaned in place. They also can be taken apart for a deeper cleaning if desired, although it's rarely necessary. This 2" Tri-Clamp Butterfly Valve features stainless steel construction and 7-position handle. The handle can be rotated 180° for right or left hand operation. 2" tri-clamp 7 locking positions Squeeze trigger locking handle Made from 304 stainless steel ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.
$99.99 $74.99
-
Gas Manifold - 1/4 in. (Aluminum)
Manifolds are a great way to have one CO2 tank supply multiple kegs. This manifold is made from aluminum, brass, and stainless. It also works up to 100 psi and includes 1/4 in ball valves with built in check valves. Another ball valve can be added to the end of the manifold for an additional gas line. Multiple manifolds can be linked up with a 1/4" nipple (D1820B). Features: 1/4" BSP ball valves 1/4" barbs Rated up to 100 psi Screw holes for easy mounting Optional additional port on the end SKU Overall Length D1802 5-1/2 in. D1807 7-3/8 in. D1811 9-5/8 in. D1813 11-1/2 in. D1816 13-1/2 in. The above measurements are from the tip of the brass barb to the plug on the opposite end. Each manifold measures approximately 3.5" from the mounting holes to the tip of the valve. Kegland Part number: KL02554
$17.22 - $41.24
-
Farro Glass | Premium Spirit Bottles | Jersey | Clear | 375mL | Case of 24
375mL spirit bottles with thick glass base and bar top finish Clear or "flint" glass to proudly display the color of your spirit Jersey design with sharp, flat shoulders offers a distinguished appearance on the shelf The Jersey spirit bottle features a thick glass base, flat shoulders, and bar top finish. Perfect for whiskey, gin, vodka, and other spirits. A robust bottle with sharp lines that offers a distinguished appearance on the shelf for any spirit you fill it with. Volume: 375 mL Style: Jersey / Flat Shoulders Use: Distilled Spirits Color: Flint / Clear Finish: Bar Top Closure Neck Opening: 18.5mm Bottom: Thick Glass Base Case QTY: 24 Pallet QTY: 84 Cases Our Farro Glass Premium Bottles offers a full lineup of the most essential and commonly used bottles. We scoured the world to find a bottle source that could provide a quality product consistently and at a fair price that we can pass on to our customers. If you've been searching for reasonably priced bottles that are reliably in stock, look no further.
$33.37 - $2,949.99
-
Farro Glass | Premium Spirit Bottles | Jersey | Clear | 750mL | Case of 12
750mL spirit bottles with thick glass base and bar top finish Clear or "flint" glass to proudly display the color of your spirit Jersey design with sharp, flat shoulders offers a distinguished appearance on the shelf The Jersey spirit bottle features a thick glass base, flat shoulders, and bar top finish. Perfect for whiskey, gin, vodka, and other spirits. A robust bottle with sharp lines that offers a distinguished appearance on the shelf for any spirit you fill it with. Volume: 750 mL Style: Jersey / Round Shape Use: Distilled Spirits Color: Flint / Clear Finish: Bar Top Closure Neck Opening: 21.5mm Bottom: Thick Glass Base Case QTY: 12 Pallet QTY: 90 cases Our Farro Glass Premium Bottles offers a full lineup of the most essential and commonly used bottles. We scoured the world to find a bottle source that could provide a quality product consistently and at a fair price that we can pass on to our customers. If you've been searching for reasonably priced bottles that are reliably in stock, look no further.
$23.24 - $2,119.99
-
Farro Glass | Premium Spirit Bottles | Oregon | Clear | 750mL | Case of 12
750mL spirit bottles with thick glass base and bar top finish Clear or "flint" glass to proudly display the color of your spirit Oregon design with rounded shoulders offers am artisanal appearance and feels great in the hand The Oregon spirit bottle features a thick glass base, round shoulders, and bar top finish. Perfect for whiskey, rum, tequila and other spirits. A robust bottle with rounded lines that feel great in the hand and gives your spirit a more artisanal appearance. Volume: 750 mL Style: Oregon / Rounded Shoulders Use: Distilled Spirits Color: Flint / Clear Finish: Bar Top Closure Neck Opening: 21.5mm Bottom: Thick Glass Base Case QTY: 12 Pallet QTY: 90 cases Our Farro Glass Premium Bottles offers a full lineup of the most essential and commonly used bottles. We scoured the world to find a bottle source that could provide a quality product consistently and at a fair price that we can pass on to our customers. If you've been searching for reasonably priced bottles that are reliably in stock, look no further.
$20.24 - $1,939.99
-
Gilda Single Lever Aperture Corker
The Gilda Compression Hand Corker is the corker most similar to how a floor corker operates. Add a cork, compress the handles, push the lever, and the cork goes in. A friend to help hold the bottle would be a good idea when using this corker. This corker offers an adjustable depth setting as well. Note: When compressing the cork you do not need the handles to touch to get the cork in the bottle. A very minor assembly is needed before using the corker. See Ferrari's video here.
$27.49 $20.62
-
Multi Jet Natural Gas Burner - 90,000 BTU
Have a weak burner that needs an upgrade? Putting together your own 3 Vessel brewing system? Then this burly Multi-Jet burner is just the ticket. Twenty individual jets combine to produce heat that will boil your water or wort in a hurry. Should be installed and connected by a professional plumber. Specifications: Cast Iron body with Brass burner jets 2-3" Flame Height 8" Ring Diameter 1/2" Female Pipe Thread Inlet 20 Jets This item is not intended for indoor use.
$120.99 $90.74
-
Heavy Duty False Bottom | BrewZilla | DigiBoil | 65L
NOTE: This accessory is designed exclusively for 3-vessel brewers who want to use the BrewZilla or DigiBoil as a mash tun. It is not meant to be used alongside a malt pipe, and it is not intended to be an upgrade or replacement to the BrewZilla's standard false bottom protection screen. If you're a 3-vessel brewer and want to use the BrewZilla or DigiBoil purely as a mash tun, this is false bottom will give you more volume compared to mashing with a malt pipe. Designed for use with DigiBoil electric kettles or BrewZilla all-in-one systems. Unlike two-piece false bottoms you may find, this unit is welded together for maximum strength. It will easily withstand as much grain weight as you could possibly fit in the vessel. Features welded handles to easily remove the false bottom when cleaning. Compatible with 65L DigiBoils and Gen 3/4 65L BrewZillas. Dimensions: Diameter: 15.35" (390 mm) Height: 1.88 (48 mm) Approximate Dead Space: 1.5 gal (5.7 L) KegLand Part Number: KL27717
$87.99 $65.99
-
HIZO G14 Pizza Oven | Gas Powered Pizza Oven | 14" Ceramic Pizza Stone | Stealth Black
The HIZO G14 Portable Gas-Fired Pizza Oven is the perfect no-hassle solution to cooking the best homemade pizza outdoors Fast. Heats to 932°F and cooks a pizza in 1 to 2 minutes Easy. No assembly required. Built-in gas ignition and adjustable heat control dial for temperature control Portable. Retractable legs and optional carry bag make it easy to transport and set up—just click the switch and start cooking 14" is the perfect size. 12" ovens are too small and 16" ovens are oversized and twice the price. Making homemade pizza in your kitchen oven is a tasty and rewarding endeavor, but nothing matches the performance and results you get from a purpose-built pizza oven. Kitchen ovens generally max out around 550°F whereas pizza ovens can reach as high as 1,000 degrees. The ideal way to cook pizza is quickly and at very high temperatures in the 800-900°F range, so if you want to take your homemade pizza game to the next level, a gas-fired pizza oven is the way to go! The HIZO G14 Pizza Oven is propane powered and ready to use straight out of the box with no bolts or tools required for assembly. Complete with dialed control and gas igniter included as standard—no batteries or matches required! Setup and packing away couldn't be easier thanks to the four stable folding legs. Includes: HIZO G14 Pizza Oven Liquid Propane hose and regulator Dual Scale Temperature Gauge: 32°F - 932°F (0°C - 500°C) Ceramic Pizza Stone: 14" x 14" x 3/8" Recommended Accessories: Waterproof Carry / Storage Bag (FPE202) Infrared Laser Thermometer (MT401) 12"or 14" Perforated Pizza Peel (FPE205 / FPE206) 8" Round Pizza Spinner (FPE204) 4" Pizza Cutter (FPE203)
$229.00 $171.75
-
Stainless Ball Valve - 1 in. Full Port
Our Ball Valves will last for years. Easy to clean. High grade 304-stainless made to last. 1" FPT on input and output side. TIP: You can take a ball valve apart using two crescent wrenches. This will allow you to open up the valve to get to the ball and two gaskets that form the seal when closed. Please Note: the ball valve may be difficult to turn at first, but it will become less resistant after it is rotated back and forth a couple times.
$29.99 $22.49
-
Stainless Tee - 1/2 in. Female BSPP
With three places to attach tubing and accessories, this tee gives you the ability to customise your brewing setup. 1/2" Female BSPP on all three openings. Made from stainless steel. BSP vs. BSPP BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT. KegLand Part Number: KL06606
$4.39 $3.29
-
Farro Glass Premium "Marie Jeanne" Triple Wine Bottle | Bordeaux | Antique Green | 2.25L | Case of 6
Large format Marie Jeanne wine bottle with the same capacity as 3 standard bottles of wine; also referred to as a Tregnum or Tappit Hen bottle No special closure needed; takes standard corks Originating from the Bordeaux region of France, this is the most popular wine bottle shape in the world Antique green glass color is often preferred for red wines to protect them from light during long term storage Farro Glass offers a full lineup of the most essential and commonly used bottles in winemaking The most popular wine bottle in the world. As the name suggests, the Bordeaux bottle (also known as a Claret bottle) originates from the Bordeaux region of France. Easily identified by its wide shoulders and straight body, this bottle style comes in a variety of colors and is suitable for a myriad of wine styles. Brown and dark green are commonly used for reds to protect them from light during long storage periods, while light green and flint are most often used only for white wines that will be consumed much sooner after bottling. This large format 2.25 liter bottle holds the equivalent volume of 3 standard bottles of wine. Volume: 2.25L Style: Bordeaux / Claret Use: Sangiovese, Tempranillo, Merlot Color: Antique Green Finish: Cork Neck Opening: 18.5 mm Bottom: Punted Case QTY: 6 Pallet QTY: 82 Cases Our Farro Glass Wine Bottles offers a full lineup of the most essential and commonly used bottles in winemaking. We scoured the world to find a bottle source that could provide a quality product consistently and at a fair price that we can pass on to our customers. If you've been searching for reasonably priced bottles that are reliably in stock, look no further.
$31.49 - $2,459.99
-
Ball Lock Adapter Tapping Head for Sanke Kegs
If you like serving out of commercial kegs but prefer the ease of using ball lock fittings in your draft system, this adapter is for you. Instead of buying additional keg couplers and beer thread to ball lock adapters, you can use this tapping head to go straight from sanke keg to ball lock. To install, remove the keg spear, place the gasket on the keg ferrule with the beaded side facing up, attach the silicone dip tube and place the tapping head on the ferrule, then secure with the 2" tri-clamp. Be sure to always depressurize the keg before removing the tapping head. Includes: Ball Lock Post Lid 2" tri-clamp Single-side beaded tri-clamp gasket 60 cm silicone dip tube (23.6") Red 2.5 bar PRV (36 psi) KegLand Part Number: KL10610
$65.99 $49.49
-
FTSs Lid for Ss Brewtech Chronical & Brew Bucket - 7 gal.
Replacement FTSs lid with pre-drilled holes. Fits the 7-gallon Ss Brewtech Chronical and Brew Bucket.
$41.95 $31.46
-
Brewzilla | Replacement PPSU Sight Glass PPSU Tube
This is a replacement BrewZilla PPSU Sight Glass tube. This is a one size fits all sight glass for multiple models and sizes. You will need to cut down the 39" PPSU tube to fit your specific model of BrewZilla depending on the length of the recirculation arm. We recommend purchasing the Pipe Cutter to cut the tube cleanly. If your unit did not already include the sight glass, Gen 3 and Gen 4 BrewZillas can be upgraded with one of these sight glass kits. See the video below showing you how to measure and install this on a BrewZilla. Specifications: 39.3" (100cm) Long 0.51" ID x 0.59" OD (13mm ID x 15mm OD) Temperature Rating: 356°F (180°C) KegLand Part Number: KL3380
$21.99 $16.49
-
KOMOS® Matte Black Stainless Draft Tower Kit
Nothing looks quite as nice as beer pouring out of a sleek, matte black draft tower. These are the same tower kits included with the KOMOS Kegerator. Includes EVABarrier draft tubing and Duotight push-to-connect fittings for easy assembly. These towers can be purchased without faucets, or you can choose your preferred faucets from the add-on options above. The tower is made from 304 brushed stainless steel, making them corrosion resistant while also looking great! Duotight Fittings & EVABarrier Draft Tubing Duotight and EVABarrier have revolutionized how you connect draft line, and our tower kits come standard with both. We love Duotight push-in fittings for their quick connection, reliable seal, and versatility. Setting up and connecting draft line has never been easier -- no more hose clamps or heating water to soften tubing! Each tower comes with Duotight fittings for the tower shanks and for splitting gas lines (double & triple tap only). We recommend adding Duotight fittings to use for your keg connections as well. Depending on whether you'll be serving from homebrew kegs or commercial sanke kegs, you'll need two DUO106 or two DUO104 per line. EVABarrier tubing has been engineered with protection in mind and is both PVC-free and BPA-free. This double walled tubing offers superior protection against oxidation, CO2 loss, and microbial growth. EVA tubing is the future of draft line for professional applications, and now your kegerator will feature the same first-class tubing. Includes: Stainless steel draft tower with matte black finish Stainless steel faucet shank(s) with Duotight tailpieces EVABarrier gas and beverage tubing Draft tower mounting screws Faucet wrench 1-3 Tap Tower Dimensions: 13.4 in. tall (without faucets) 3 in. tower diameter 4.4 in. base diameter 4 Tap Tower Dimensions: 15.75 in. tall (without faucets) 4.5 in. tower diameter Interior mounting holes (does not include bottom collar) Please note: Perlick Flow Control faucets are not compatible with the included Intertap tower shanks. Lowest Price Guarantee, this item has MAP pricing so you can be confident you won't find it for less.
$89.99 - $179.99
-
KOMOS® | Corny Keg O-Ring Kit
Put your ball lock or pin lock homebrew keg back into perfect working order with the KOMOS corny keg rebuild kit. Includes brand new o-rings for the keg lid, dip tubes, and keg posts / body connects. Comes in a convenient zip lock bag.
$4.49 $3.37
-
MB® MiniChilly | Multi-Tank Glycol Chiller | Bulkhead Sets for 10 Fermenters | Digital Temp Control | Rolling Casters | Stainless Steel Enclosure | 1.2 HP
The German made 1.2 horse power MB Chiller is an ideal solution for nano breweries looking to chill up to 10 fermenters at once. The idea of the MiniChilly is that for each fermenter you want to a chill a pump kit is added. A pump kit (GLY35) includes a submersible pump that is placed in the cold bath of the Mini Chilly along with a digital controller that is placed next to your fermenter. Silicone tubing is included to make the connections. The digital controller includes a thermal probe that should be inserted into a thermal well in your vessel or can be taped to the outside of the vessel if you don't have a thermal well. The digital controller then measures the temperature of your tank and turns the submersible pump on or off to cool the liquid in your vessel to the desired set temperature. In this way each tank can be set at different temperatures. The MiniChilly is made by Quantor/Kreyer of Germany who is the largest manufacturer of glycol systems for breweries and wineries in the world. Made with high quality manufacturing and components, the MiniChilly is a durable system for many years of problem-free brewing. It is German made and we guarantee you will appreciate the build quality when compared to other chillers on the market. The unit features a stainless steel case with stainless 3/8" barbs in the top that allow for a clean connection of the silicone tubing that will run from each pump to each tank. The MiniChilly is able to chill its reservoir down to 21°F when a 30% glycol solution is used. The compact size and included casters make it easy to move around the brewery when needed. Applications: Cooling of Fermentation Cold Crashing for Brite Tanks Maintain Lagering Temperatures Compatibility: The MiniChilly can be used with any fermenter that has a built-in cooling jacket or a submersed cooling coil. It works well as the cooling source for the following systems and fermenters. BrewBuilt Jacketed Uni Conical - You will need one Glycol Pump Kit for each tank. Ss Brewtech Fermenters and Brites with optional FTS Temperature Control Systems: Because FTS systems include a pump and controller you will not need to buy a separate Glycol Pump Kit. Spike Conical with Optional Cooling Package - Because the optional Spike cooling system includes a pump and controller you will not need to buy a separate Glycol Pump Kit. Speidel Tanks with Optional Cooling Jackets - You will need one Glycol Pump Kit for each tank. Grainfather Fermenters - Grainfather fermenters have standard cooling jackets. You will need one Glycol Pump Kit for each fermenter Blichmann Fermenators with Optional Cooling Coil - You will need one Glycol Pump Kit for each Fermenator. Capacity: Many chiller ratings are based on the theoretical power of the compressor, while the cooling capacity of the MiniChilly is rated at a realistic ambient temperature. This is much more useful for predicting the MiniChilly’s performance in real world applications. Of course, you could cool a greater number of smaller tanks but you’re ultimately limited to the 10 connections. Actual cooling capacities will vary based on the insulation of the tank. For the examples below we assume neoprene or better. Cooling Capacity Example: Up to 10 1BBL (31 Gallon) well-insulated tanks fermenting at 68°F in 80°F ambient temperature. For every fermenter you want to cold crash remove 4 fermenting fermenters from the capacity. Set Up: In order to hook up the MiniChilly to your fermenter or tank's cooling system, you will need 4 lengths of tubing per pump. All tubing connections should be secured with hose clamps. Length 1: Submersible pump outlet to inner barb of 1st bulkhead Length 2: Outer barb of 1st bulkhead to cooling system inlet Length 3: Cooling system outlet to outer barb of 2nd bulkhead Length 4: Inner barb of 2nd bulkhead to MiniChilly reservoir (should drain freely, no connection necessary) Technical Characteristics: Power: 110V-1Ph/50-60Hz Compressor Power: 1.2hp/900watts Cooling Capacity at 32°F glycol temp and 90°F Ambient Temp: 1.05 KW/1050 Watts (60Hz 110V) Cooling Capacity at 60°F glycol temp and 90°F Ambient Temp: 1.92 KW/1920 Watts (60Hz 110V) Stainless Steel Unit Water Temperature Range: 21°F - 86°F (-6°C - 30°C) Ambient Temperature Range: 50°F - 90°F (10°C - 32°C) Refrigerant R134a Free Glycol Water-Bath for Mini-Pumps Fittings 3/8" for Plastic Tubes of Individual Pumps Solid Wheels w/ Breaks for Easy Mobility Universal C19 Plug On/Off Switch Water-Level Sight-Tube Grooves for Individual Pump Cables Safety Inner Separation Water Side from Electric Side Tank Capacity: 12.68 gal. (48 L) Dimensions: 29.5"L x 15.75"W x 21.75"H Weight: 112.5 lbs Made in Germany CE Certified
$3,699.99 $2,774.99
-
Sanke to Flare Adapter - 1/4" Male Flare
This special converter fitting allows you to easily convert back and forth between commercial kegs and homebrew style cornelius kegs with ease. They fit on the beer or gas side of a sanke tap, and instead of the standard clamped line connection that can't be changed, allow use to connect via a male flare swivel thread. Male flare is the same style of fitting found on homebrew quick disconnects. Please view the you might also need products below for the correct female flare fittings to install on your draft line. Kegland Part number: KL05159
$8.19 $6.14
You have seen 48 out of 64 products