Beer Bottling & Kegging

Commercial quality beer bottle caps to keep your brew safe and sound from bottling day until you're ready to enjoy it. You will get a good firm seal that will last through transport, gift giving, and storage with these gold bottle caps. These bottle caps crimp down onto the beer bottle and make a firm seal. They don’t rust or leak and they contain an Oxygen absorbing agent in the liner, which means you won’t get any unwanted oxidation. A good value for a great product.   26 mm diameter caps fit American bottles. Some imported bottles and some sparkling wine bottles use a 29 mm cap instead. We recommend test fitting prior to filling if you're re-using an imported bottle.   Important to note: It is recommended that you only sanitize as many caps as you'll require at the time of bottling. The oxygen-absorbing agent is activated when the cap gets wet. If wetted caps are saved for later use, they'll still function as a normal cap, but the oxygen absorbing agent may be depleted.  

Read more less

Thin walled tubing perfect for siphoning or tranferring liquids when not under pressure. This is the most common size hose for homebrewing that you would need to fit onto the plastic spigots (FE347), 3/8'' OD bottle fillers, and the 3/8'' OD racking canes. 3/8" ID, 1/2" OD 1/8" thick wall  

Read more less

Traditional Norther American Longneck glass beer bottles Thick amber glass offers better protection against UV rays compared to green or clear glass Two cases of 24 bottles are enough to package a 4.5 gallons of finished beer Rather than labeling, you can color code your homebrew with different colored bottle caps 26mm crown cap finish Traditional 12 oz longneck beer bottles that take standard crown caps (26 mm).  24 bottles per case, with dividers. These bottles are thicker and darker than most other bottles, offering better protection against UV rays and preventing your beer from becoming lightstruck.  These bottles are used by the likes of Stone, Drakes and even the big guys like Anheuser Busch.   The displacement caused by a 3/8" bottle filler (B411) leaves the perfect amount of headspace in your bottle.  Two cases of this classic beer bottle will house a standard 5 gallon batch of homebrew.  Fits all standard (26 mm) pry-off and universal style crown caps. Don't forget your bottle caps. We stock over 10 different colors and styles of crown caps! Skip labelling your bottles by identifying them with colored crown caps. Bottle Specifications: Capacity: 12 fl Oz Weight: 0.425 lb Height: 9 inches Outside Diameter: 2.4 inches Pressure Rating: Up to 3 volumes of carbonation.

Read more less

Commercial quality beer bottle caps to keep your brew safe and sound from bottling day until you're ready to enjoy it. You will get a good firm seal that will last through transport, gift giving, and storage with these black bottle caps. These bottle caps crimp down onto the beer bottle and make a firm seal. They don’t rust or leak and they contain an Oxygen absorbing agent in the liner, which means you won’t get any unwanted oxidation. A good value for a great product.   26 mm diameter caps fit American bottles. Some imported bottles and some sparkling wine bottles use a 29 mm cap instead. We recommend test fitting prior to filling if you're re-using an imported bottle.   Important to note: It is recommended that you only sanitize as many caps as you'll require at the time of bottling. The oxygen-absorbing agent is activated when the cap gets wet. If wetted caps are saved for later use, they'll still function as a normal cap, but the oxygen absorbing agent may be depleted.

Read more less

Commercial quality beer bottle caps to keep your brew safe and sound from bottling day until you're ready to enjoy it. You will get a good firm seal that will last through transport, gift giving, and storage with these green bottle caps. These bottle caps crimp down onto the beer bottle and make a firm seal. They don’t rust or leak and they contain an Oxygen absorbing agent in the liner, which means you won’t get any unwanted oxidation. A good value for a great product.   26 mm diameter caps fit American bottles. Some imported bottles and some sparkling wine bottles use a 29 mm cap instead. We recommend test fitting prior to filling if you're re-using an imported bottle.   Important to note: It is recommended that you only sanitize as many caps as you'll require at the time of bottling. The oxygen-absorbing agent is activated when the cap gets wet. If wetted caps are saved for later use, they'll still function as a normal cap, but the oxygen absorbing agent may be depleted.    

Read more less

Forward-sealing design prevents beer residue from gumming up the faucet! Threaded spout can be replaced with a variety of attachments Unique sliding shuttle design allows the faucet to last longer than standard floating o-ring design 304 stainless steel construction The patented Stainless Steel Intertap Faucet is a forward sealing faucet that represents the most modern faucet design. It has a modular, threaded spout which can fit a variety of different attachments including a growler filler or a stout spout. In normal rear-sealing faucets the entire faucet has to drain of beer. In forward-sealing faucets the faucet keeps beer in it so the inside doesn't have a chance to get sticky, making cleaning much easier. It also reduces the chance of off flavors transfering to your beer while you pour. Other forward sealing faucets use a floating o-ring, which is just as sanitary but requires the o-ring to move inside the faucet body in order to seal correctly. This can become a problem as the faucet ages. Intertap faucets use a sliding shuttle that guides the o-ring into the perfect position every time.  The threaded spout easily unscrews from the faucet and can be replaced by a growler filler or stout spout quickly and easily. Pour a pint and then fill a growler in no time at all. 304 Stainless Steel construction so you don't have to worry about chrome plating wearing off and exposing your beer to brass.   Kegland Part number: KL00970

Read more less

Add convenience and reduce the mess of bottling with this bottling wand!   Say goodbye to the days of just running a tube from your bottling bucket's spigot into the bottom of the bottle. A bottling wand starts its flow when you press the wand tip against the bottom of the bottle, and stops when you lower the bottle away from it. No more having to fiddle with the spigot during bottling, and no more mess from the dripping hose between bottles!   What does this bottle filler have that the rest don't? A removable tip and spring that make this model easy to sanitize. Plus, the nozzle spring can be removed if you prefer the action of a springless bottle filler. The actual "wand" on the filler is 12 inches long.   The plastic end fits nicely into our FE346 spigot, or it can be removed to attach 3/8" ID tubing.      

Read more less

Easily attaches to any Intertap faucet. Just unscrew the standard spout and replace it with this growler spout. Then you'll have a 1/2" (13mm) barb on the end of your faucet. Compatible with Intertap and NukaTap faucets. Stainless Steel Construction Kegland Part number: KL01038  

Read more less

Commercial quality beer bottle caps to keep your brew safe and sound from bottling day until you're ready to enjoy it. You will get a good firm seal that will last through transport, gift giving, and storage with these red bottle caps. These bottle caps crimp down onto the beer bottle and make a firm seal. They don’t rust or leak and they contain an Oxygen absorbing agent in the liner, which means you won’t get any unwanted oxidation. A good value for a great product.   26 mm diameter caps fit American bottles. Some imported bottles and some sparkling wine bottles use a 29 mm cap instead. We recommend test fitting prior to filling if you're re-using an imported bottle.   Important to note: It is recommended that you only sanitize as many caps as you'll require at the time of bottling. The oxygen-absorbing agent is activated when the cap gets wet. If wetted caps are saved for later use, they'll still function as a normal cap, but the oxygen absorbing agent may be depleted.    

Read more less

Perfect for use as a 5-gallon batch beer fermenter or bottling bucket Inlcuded plastic spigot for easy gravity transfers or attaching a bottle filling wand Sediment blocker on the spigot's back locking nut helps minimize trub pickup when racking out after fermentation Once you've upgraded to a carboy or other fermenter, the bucket will remain a reliable brewing tool for cleaning and sanitizing purposes External volume markers provide a convenient reference point when filling the bucket with water to make cleaner or sanitizer solution A six gallon food grade bucket for fermentation or bottling with a built in spigot and external volume markings up to five gallons.  Outlet barb accepts 3/8" ID vinyl tubing.  To use as a fermenter you will need to pick up the optional lid, stopper, and an airlock.  Includes our new Sediment Block Spigot, which will help minimize trub uptake as you rack after fermentation.  If using this as a bottling bucket, simply rotate the spigot to maximize product output.  Spigot includes gasket and sediment blocking lock nut and can easily be removed for cleaning and sanitizing. If you use the bucket for fermentation be sure to use care when cleaning. Do not use any abrasive pads that would scratch. Once you get a scratch in a plastic bucket it is very hard to sanitize.  This is also why we don't recommend storing equipment in a bucket between uses as a fermenter. A hot PBW soak is often a perfect way to clean a bucket, followed by a Star San soak for killing bacteria. Bucket has external volume markings up to 5 gallons. 17.5" H x 12" Ø Please Note: Buckets are translucent and do not come with lids Buckets are not designed to hold pressure Lids are not gasketed and so do not always form a perfect, airtight seal. Not intended for long-term storage Food-Grade to 180° 

Read more less

New Corny Keg ready to use right out of the box New Kegs are trouble-free for years Rubber top and bottoms protect floors from dings Lid includes a tab wth hole welded in so you can hang anything from lid (dry hop our favorite) 304 Stainless Steel and great welds, this will last a tifetime Features Low2 Keg Lid O-ring which offers a 96% reduction in oxygen ingress compared to silicone Ditch the bottles and start kegging today! Save time, reduce the risk of infection and get all those bottles out of the kitchen for good! Brand new 5 gallon Kegland kegs offer convenience, security and insurance when compared to used or reconditioned kegs. There's no need to replace gaskets or other parts, no need to trust that someone else did a good job with reconditioning, and no possibility of residual flavor or aromas getting into your beer! Features: Ball lock 130 PSI Operating Pressure 5 Gallon (19 L) Capacity Dry Hop Tab Welded into Lid 304 Stainless Steel Dimensions: Height: 24.75 in. Diameter: 8.375 in. Kegland Part Number: KL02899

Read more less

Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. Wide 0-60 PSI operating range suitable for both dispensing and rapid burst carbonation Ideal for seltzers and high-carbonation drinks requiring 30-40 PSI Includes a Duotight adapter for EVABarrier tubing and a 1/4" flare fitting with barb, allowing for quick and adaptable gas line setups Heavy-duty steel gauges with rubber bumpers, robust body, and precision diaphragm ensure long-lasting, accurate pressure adjustments Compatible with standard US CO2 tanks and can be adapted for use with Nitrogen / Argon tanks The robust body and precision diaphragm provide high flow rates, and the pressure can be easily and precisely adjusted with the hand dial. Extra thick stainless gauges come with rubber bumpers for added protection. The dial faces are triple-scaled to read in psi, bar and kPa. The PRV is rated to 65 psi (4.5 bar) for added safety while in use. Comes with male flare thread gas-out with included 1/4" barb and nut. Easily swap out the barb to a different size if desired. On the back of the regulator body are three M6 screw holes for mounting (screws not included). Each KOMOS regulator includes a Duotight Adapter, allowing for quick connection of EVABarrier draft tubing for a solid, yet easy to change, way of connecting gas line. Add Duotight Tees to easily split the line to multiple kegs.   The regulator is CO2 ready with standard US CGA320 threads. It can also be used with Nitrogen or Argon tanks with the optional CGA320 x CGA580 Adapter. Features: 0–60 PSI operating range Low pressure gauge reads from 0–100 Pull ring PRV rated to blow off at 65 PSI Strong, robust design Highly accurate precision diaphragm 1/4" flare fitting with barbed outlet & Duotight adapter fitting M6 mounting screw holes Made in accordance with AS 4267  

Read more less

High performance primary regulator designed to handle the workload of dispensing from multiple taps without freezing up! Dual high-pressure and low-pressure gauges to easily reference CO2 cylinder pressure and output pressure Pressure settings are easily adjusted by hand using the large plastic adjustment knob CGA320 inlet features a built-in gasket where the unit attaches to the CO2 tank—eliminating the need of replacing fiber washers with each tank swap Made in the USA. Taprite is one of leading manufacturers of gas regulators and draft dispensing equipment One-way shutoff valve outlet protects your regulator from backflow and can be turned on/off to stop gas flow without needing to close your tank When it comes to CO2 regulators, we’ve tried them all. This quality unit by Taprite is our favorite on the market. It’s no wonder this regulator is trusted by so many breweries and beer bars—it represents the best quality at a great price. Available in a standard, single-body model, as well as a dual-body model which allows you to send different pressures to two separate kegs from the same CO2 tank! The things you’ll love about this regulator are:  The large front knob makes pressure adjustment tool-free, easy & fast.  The built-in gasket where the regulator connects to the CO2 tank eliminates the constant replacement of fiber washers every time you change out your tank.  The barbed outlet features a one-way on/off valve which prevents backflow and protects the regulator’s internals.  The gauges are easy to read. The low pressure gauge reads from 0 to 60 psi. The optional available gauge cage is the best on the market. This is the T742HP model, where the HP stands for high performance; it won't freeze up when multiple taps are running at once. Best of all is the consistent pressure regulation. With many regulators the pressure can 'creep' up over time. This unit holds the pressure rock steady. No drifting.    Built by Taprite, an American company. 

Read more less

Commercial quality beer bottle caps to keep your brew safe and sound from bottling day until you're ready to enjoy it. You will get a good firm seal that will last through transport, gift giving, and storage with these white bottle caps. These bottle caps crimp down onto the beer bottle and make a firm seal. They don’t rust or leak and they contain an Oxygen absorbing agent in the liner, which means you won’t get any unwanted oxidation. A good value for a great product.   26 mm diameter caps fit American bottles. Some imported bottles and some sparkling wine bottles use a 29 mm cap instead. We recommend test fitting prior to filling if you're re-using an imported bottle.   Important to note: It is recommended that you only sanitize as many caps as you'll require at the time of bottling. The oxygen-absorbing agent is activated when the cap gets wet. If wetted caps are saved for later use, they'll still function as a normal cap, but the oxygen absorbing agent may be depleted.    

Read more less

Commercial quality beer bottle caps to keep your brew safe and sound from bottling day until you're ready to enjoy it. You will get a good firm seal that will last through transport, gift giving, and storage with these blue bottle caps. These bottle caps crimp down onto the beer bottle and make a firm seal. They don’t rust or leak and they contain an Oxygen absorbing agent in the liner, which means you won’t get any unwanted oxidation. A good value for a great product.   26 mm diameter caps fit American bottles. Some imported bottles and some sparkling wine bottles use a 29 mm cap instead. We recommend test fitting prior to filling if you're re-using an imported bottle.   Important to note: It is recommended that you only sanitize as many caps as you'll require at the time of bottling. The oxygen-absorbing agent is activated when the cap gets wet. If wetted caps are saved for later use, they'll still function as a normal cap, but the oxygen absorbing agent may be depleted.    

Read more less

Commercial quality beer bottle caps to keep your brew safe and sound from bottling day until you're ready to enjoy it. You will get a good firm seal that will last through transport, gift giving, and storage with these orange bottle caps. These bottle caps crimp down onto the beer bottle and make a firm seal. They don’t rust or leak and they contain an Oxygen absorbing agent in the liner, which means you won’t get any unwanted oxidation. A good value for a great product.   26 mm diameter caps fit American bottles. Some imported bottles and some sparkling wine bottles use a 29 mm cap instead. We recommend test fitting prior to filling if you're re-using an imported bottle.   Important to note: It is recommended that you only sanitize as many caps as you'll require at the time of bottling. The oxygen-absorbing agent is activated when the cap gets wet. If wetted caps are saved for later use, they'll still function as a normal cap, but the oxygen absorbing agent may be depleted.    

Read more less

Automatically release pressure inside your fermenter during pressure fermentations Regulate beer flow during pressurized transfers from fermenter to keg Large triple scale pressure gauge with extended 0-40 PSI pressure range Diaphragm spunding valves offer higher accuracy compared to spring & poppet spunding valves Comes complete with ball lock QD, Duotight adapter, tee, and rigid joiners With this complete kit you'll be ready to use the Blow Tie Spunding Valve right out of the box. The BlowTie is used to release excess pressure on a pressurized fermenter or from a receiving keg during pressure transfers. This diaphragm spunding valve is much more accurate than the spring and poppet style, and works much better at lower pressures. Pressure Fermentation Pressure fermentation is becoming more and more popular at the homebrew level, but in order to do it safely and accurately, you need a way to release excess pressure. You'll pressurize your vessel to your desired psi, but once fermentation begins and those hungry, active yeast start creating CO2, the pressure inside the vessel will increase. Attach a spunding valve and set it to your desired pressure, and it will blow off when the pressure gets to high and close up again when it's back to your desired psi. Pressure Transfers Even if you don't have a pressurizable fermenter, you may have done pressure transfers from keg to keg during filtering or after fining. During pressure transfers, it's a good idea to have a bit of head pressure in the receiving keg, especially if you're transferring beer that is already carbonated. Having a spunding valve in place will allow you to consistently control the head pressure and give you more consistent results, without losing carbonation in the process. Diaphragm vs. Poppet With the poppet style spunding valve, a spring pushes against a poppet to keep the valve closed. When the poppet lifts up to open, the surface area the gas pushes against becomes larger, and the spring has to work harder to push the poppet down and reseal the valve. This can lead to more gas being released than intended, and the remaining pressure in your vessel may be at a lower psi than your spunding valve’s set psi.  Instead of a poppet, the spring inside the BlowTie pushes against a diaphragm, which has an immensely larger surface area. This means the surface area that the gas pushes against while the diaphragm is closed is significantly closer to the surface area it pushes against when the diaphragm is open. This leads to higher accuracy, and the remaining pressure after excess gas is released will be much closer to your set blow off pressure. Kit Includes: BlowTie Pressure Gauge (0-40 psi) Ball Lock Disconnect Duotight Tee & Flared Duotight Fitting 2x Lengths of EVABarrier 8mm OD Tubing  

Read more less

Commercial quality beer bottle caps to keep your brew safe and sound from bottling day until you're ready to enjoy it. You will get a good firm seal that will last through transport, gift giving, and storage with these silver bottle caps. These bottle caps crimp down onto the beer bottle and make a firm seal. They don’t rust or leak and they contain an Oxygen absorbing agent in the liner, which means you won’t get any unwanted oxidation. A good value for a great product.   26 mm diameter caps fit American bottles. Some imported bottles and some sparkling wine bottles use a 29 mm cap instead. We recommend test fitting prior to filling if you're re-using an imported bottle.   Important to note: It is recommended that you only sanitize as many caps as you'll require at the time of bottling. The oxygen-absorbing agent is activated when the cap gets wet. If wetted caps are saved for later use, they'll still function as a normal cap, but the oxygen absorbing agent may be depleted.    

Read more less

Use for the 1/2'' OD racking cane and 1/2'' OD bottle fillers.  

Read more less

Traditional Bomber glass beer bottles Perfect for splitting between two drinkers or sampling for a small group (or to simply cut down on bottling time!) Thick amber glass offers better protection against UV rays compared to green or clear glass Two cases of 12 bottles are enough to package just over 4 gallons of finished beer Rather than labeling, you can color code your homebrew with different colored bottle caps Traditional 22 oz longneck beer bottles, often referred to as "beer bomber bottles", take standard crown caps (26 mm).  12 bottles per case, with dividers. These bomber bottles are thicker and darker than most other bottles, offering better protection against UV rays and preventing your beer from becoming lightstruck.  These bottles are used by the likes of Stone, Speakeasy, Drakes, Knee Deep and even Anheuser Busch.   The displacement caused by a 3/8" bottle filler (B411) leaves the perfect amount of headspace in your bottle.  Significantly reduce your bottling time by switching from 12 oz bottles to 22 oz bottles. Two cases of this classic beer bottle will house a standard 5 gallon batch of homebrew (you may need an extra bottle or two if you ended up with a full five gallons).  Fits all standard (26 mm) pry-off and universal style crown caps. Don't forget your bottle caps. We stock over 10 different colors and styles of crown caps! Skip labelling your bottles by identifying them with colored crown caps. Bottle Specifications: Capacity: 22 fl. Oz. Weight: 1 5/8 lb Height: 11 inches Outside Diameter: 2.9 inches Pressure Rating: Up to 3 volumes of carbonation.

Read more less

Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this item to you when we receive more in mid January.   Have a keg of beer, but want to fill some bottles to take with you to the game, beach, or friend's house? The BeerGun is a great way to fill bottles from a keg. Every part that comes into contact with your beer is stainless steel. This unit features a CO2 purge, which helps to prevent oxidation during filling. Includes tubing and a brush for cleaning. The Version 2 BeerGun will soon become the standard for rapid handheld bottling.  This new model features an ergonomic handle, with valve controls placed conveniently at your fingertips.  This upgrade is easier to clean, and even easier to use.  If you've used other bottlers, but been disappointed by confusing controls or foaming, then this is the Bottle Filler for you. What's New: Ergonomic warm-touch grip with ambidextrous thumb actuated CO2 valve Positively retained beer gun seal tip - no more lost tips! Anti-microbial beer hose keeps contamination at bay! Accessory kit  now included as standard item Tool free super fast disassembly Made in the USA! Note: Regulators and "Y" fittings are not included with the product. You need two gas sources, so a dual output MFL regulator is ideal.  You can add a second output to your regulator by adding a "Y" Fitting and 2 shutoffs.  You can also cut your line and add a barbed "T" or use a manifold.

Read more less

Commercial quality beer bottle caps to keep your brew safe and sound from bottling day until you're ready to enjoy it. You will get a good firm seal that will last through transport, gift giving, and storage with these American flag bottle caps. These bottle caps crimp down onto the beer bottle and make a firm seal. They don’t rust or leak and they contain an Oxygen absorbing agent in the liner, which means you won’t get any unwanted oxidation. A good value for a great product.   26 mm diameter caps fit American bottles. Some imported bottles and some sparkling wine bottles use a 29 mm cap instead. We recommend test fitting prior to filling if you're re-using an imported bottle.   Important to note: It is recommended that you only sanitize as many caps as you'll require at the time of bottling. The oxygen-absorbing agent is activated when the cap gets wet. If wetted caps are saved for later use, they'll still function as a normal cap, but the oxygen absorbing agent may be depleted.  

Read more less

Automatically release pressure inside your fermenter during pressure fermentations Regulate beer flow during pressurized transfers from fermenter to keg Built-in pressure gauge for easy reference when adjusting the spunding valve Pressure gauge is interchangeable—swap to different pressure ranges that better suit your application Diaphragm spunding valves offer higher accuracy compared to spring & poppet spunding valves Comes complete with ball lock QD, Duotight adapter, and rigid joiner With this complete kit you'll be ready to use the BlowTie 2 Spunding Valve right out of the box. The BlowTie is used to release excess pressure on a pressurized fermenter or from a receiving keg during pressure transfers. This diaphragm spunding valve is much more accurate than the spring and poppet style, and works much better at lower pressures. This version of the Spunding Valve Kit includes the CM Becker Ball Lock QD, often considered the finest quality in plastic ball lock quick disconnects, and an 8 mm Duotight Flare Adapter for connecting to the BlowTie. The BlowTie 2 can also be upgraded with a Digital Mini Pressure Gauge. Pressure Fermentation Pressure fermentation is becoming more and more popular at the homebrew level, but in order to do it safely and accurately, you need a way to release excess pressure. You'll pressurize your vessel to your desired psi, but once fermentation begins and those hungry, active yeast start creating CO2, the pressure inside the vessel will increase. Attach a spunding valve and set it to your desired pressure, and it will blow off when the pressure gets to high and close up again when it's back to your desired psi. Pressure Transfers Even if you don't have a pressurizable fermenter, you may have done pressure transfers from keg to keg during filtering or after fining. During pressure transfers, it's a good idea to have a bit of head pressure in the receiving keg, especially if you're transferring beer that is already carbonated. Having a spunding valve in place will allow you to consistently control the head pressure and give you more consistent results, without losing carbonation in the process. Diaphragm vs. Poppet With the poppet style spunding valve, a spring pushes against a poppet to keep the valve closed. When the poppet lifts up to open, the surface area the gas pushes against becomes larger, and the spring has to work harder to push the poppet down and reseal the valve. This can lead to more gas being released than intended, and the remaining pressure in your vessel may be at a lower psi than your spunding valve’s set psi.  Instead of a poppet, the spring inside the BlowTie pushes against a diaphragm, which has an immensely larger surface area. This means the surface area that the gas pushes against while the diaphragm is closed is significantly closer to the surface area it pushes against when the diaphragm is open. This leads to higher accuracy, and the remaining pressure after excess gas is released will be much closer to your set blow off pressure. Kit Includes: BlowTie 2 w/ Integrated Pressure Gauge (0-15 psi) CM Becker Gray Ball Lock Disconnect Duotight Flare Fitting 8 mm OD Rigid Plastic Joiner  

Read more less

Simply unscrew the normal spout on an Intertap faucet and screw this stout spout in its place to pour your nitro brews. This spout has a creamer/aerator disc inside that strips out the nitrogen gas for a creamier beer. For additional disc options, check out the 7-Disc Creamer/Aerator Kit. Compatible with Intertap and NukaTap faucets. Stainless Steel Construction Kegland Part number: KL01021

Read more less

This Spigot can be easily installed onto any bucket for added convenience.   Drill a 1" hole and install in bucket with the gasket against the exterior of the bucket.    Spigot uses 3/8 in ID tubing.

Read more less

Automatically release pressure inside your fermenter during pressure fermentations Regulate beer flow during pressurized transfers from fermenter to keg Built-in pressure gauge for easy reference when adjusting the spunding valve Pressure gauge is interchangeable—swap to different pressure ranges that better suit your application Diaphragm spunding valves offer higher accuracy compared to spring & poppet spunding valves 8 mm Duotight inlet/outlet for use with 8 mm OD EVABarrier tubing or 8 mm Rigid Joiners The Blow Tie Spunding Valve is used to release excess pressure on a pressurized fermenter or from a receiving keg during pressure transfers. This diaphragm spunding valve is much more accurate than the spring and poppet style, and works much better at lower pressures. The BlowTie 2 features an integrated pressure gauge so you can quickly and easily dial in your pressure setting. The analog gauge is removable and can be swapped out with a gauge of a different pressure range or it can be swapped out for the Digital Mini Pressure Gauge. Pressure Fermentation Pressure fermentation is becoming more and more popular at the homebrew level, but in order to do it safely and accurately you need a way to release excess pressure. You'll pressurize your vessel to your desired psi, but once fermentation begins and those hungry, active yeast start creating CO2, the pressure inside the vessel will increase. Attach a spunding valve and set it to your desired pressure, and it will blow off when the pressure gets too high and close up again when it's back to your desired psi. Pressure Transfers Even if you don't have a pressurizable fermenter, you may have done pressure transfers from keg to keg during filtering or after fining. During pressure transfers, it's a good idea to have a bit of head pressure in the receiving keg, especially if you're transferring beer that is already carbonated. Having a spunding valve in place will allow you to consistently control the head pressure and give you more consistent results, without losing carbonation in the process. Diaphragm vs. Poppet With the poppet style spunding valve, a spring pushes against a poppet to keep the valve closed. When the poppet lifts up to open, the surface area the gas pushes against becomes larger, and the spring has to work harder to push the poppet down and reseal the valve. This can lead to more gas being released than intended, and the remaining pressure in your vessel may be at a lower psi than your spunding valve’s set psi. Instead of a poppet, the spring inside the BlowTie pushes against a diaphragm, which has an immensely larger surface area. This means the surface area that the gas pushes against while the diaphragm is closed is significantly closer to the surface area it pushes against when the diaphragm is open. This leads to higher accuracy, and the remaining pressure after excess gas is released will be much closer to your set blow off pressure. Set Up The BlowTie spunding valve comes with 8 mm Duotight fittings on the inlet and outlet, and we recommend using it with EVABarrier 8 mm OD tubing (D1717 or D1718). You'll also need the flare Duotight fitting (DUO106) in order to attach it to a ball lock or pin lock disconnect. Dialing in your desired pressure is even easier with the BlowTie 2, thanks to the integrated pressure gauge. Simply start with the adjustment knob fully closed, then slowly open it until the gauge reading matches your desired pressure setting. Specifications: Made from food grade acetal Stainless screws Easily disassembles for cleaning 8mm (5/16") Duotight fittings at both ends Interchangeable pressure gauge Gauge reads from 0-15 psi WARNING: Do not exceed gauge pressure. Exceeding the pressure range will damage the gauge. Kegland Part number: KL15042  

Read more less

The Tapcooler Counter Pressure Bottle Filler is an all-new, easy-to-use bottling device! Allows you to perfectly bottle beer from a forward-sealing beer faucet without CO2 loss Purge bottles and headspace with CO2 to keep oxygen out, prolonging the life of your beer Perfect for bottling for competitions, sending bottles home with friends, or to take on the go! Easy to setup and super easy clean. For a Duotight-compatible filler, check out the NukaTap Counter Pressure Bottle Filler The Tapcooler Counter Pressure Bottle Filler is the best way to quickly and easily fill bottles of homebrew directly from your draft system. No need to mess with alternate liquid lines or other complex contraptions. Just slide the Tapcooler into any forward sealing faucet (such as a Perlick, Intertap, or Nukatap) hook up a CO2 line, and you're ready to roll. Whether you're filling bottles for a competition or just grabbing a couple to share with your friends, the Tapcooler is quick and easy to use, and will help maintain the flavor, aroma, and carbonation level of your beer so it tastes the same out of the bottle as it would out of the tap. A counter pressure bottle filler is the best tool for bottling, as the bottle is under pressure while the carbonated beer flows in, which results in a minimal loss of the CO2 in solution. The Tapcooler improves upon the standard counter pressure filler, as it plugs directly into your draft faucet. Other counter pressure solutions require you to hook up a separate liquid line, which is not something standard draft systems have setup and requires additional time to prep. With the Tapcooler, you can have it setup and ready to go in less than a minute! The Tapcooler design is also advantageous because after you are done filling the bottle, it stays in place hooked up to your faucet while other fillers require you to set the unit aside and pick it back up again for the next bottle. Connecting your CO2 line is also a snap. You can either hook up directly with a 3/16" push-fit line, or connect your line to the included barb fitting. You can also purchase the gas ball lock adapter (KEG881), which gives you the ability to attach a gas-in disconnect directly to the filler unit. We highly recommend picking up this optional accessory! The Tapcooler is designed to fill beer and CO2 from the bottom of the bottle through the telescoping bottle connection tube. First CO2 flows down into the bottom of the bottle to flush from the bottom up. Next you open the tap and beer flows down the same tube, filling from the bottom up. The result is a more effective purging of oxygen and little to no foam during the filling process. The telescoping bottle connection tube allows you to fill bottles as small as 4.5" tall and up to 12.5" tall. You can fill taller bottles with the Tapcooler, but the tube will not reach the bottom of the bottle, which can lead to some splashing. When filling wide mouth containers, a bottle stopper of suitable size and with a 9 mm hole can be used as an adapter. The filler features a push button CO2 purge valve, which allows you to purge the bottle of oxygen before and after filling. It also includes an adjustable pressure relief valve, giving you the ability to change the filling speed. The pressure relief valve also acts as an overflow port for excess beer or foam to escape when filling. One of the best features of the Tapcooler is that it's super easy to clean. Cleaning other bottle fillers can be a chore and take lots of time. The Tapcooler comes apart easily and allows you to clean all parts effectively and easily after each use. All metal parts that come into contact with your beer are made from 304 stainless steel. The barb and ball lock CO2 adapters are made of aluminum. Finally, the Tapcooler comes chock full of optional accessories that will adapt your filler perfectly to your setup. See the "You Might Also Need" section below for list of accessories! Forward-Sealing Faucet Compatibility Tapcooler fits Intertap, Nukatap, Ultratap, Vent-Matic, and Perlick 600 series faucets. These fillers can be converted to fit Perlick 500 series with the optional tap connector (KEG887). Cannot be used with ventilated beer taps, i.e. non-forward sealing beer taps. Features: Hooks up directly to any forward sealing faucet for quick and easy use. Quick setup and easy maintenance. Perfect for bottling for competitions, sending bottles home with friends, or just to have some bottles on the go! A range of accessories are offered for more range and easier use! Purge bottles with CO2 before and after filling for longer lasting beer! Pressure relief valve allows for control over filling speed and allows excess foam to escape for the perfect pour every time! Made from 304 stainless steel Easy to use and clean!  

Read more less

This capper is perfect for the brewer that is tight on storage space or doesn't feel like hauling out the big floor capper! The Emily hand capper is one of those pieces of equipment that a homebrewer must have.   Made by Ferrari of Italy this is the classic smooth operating, easy to use hand capper. It is made from self-lubricating Nylon and is surprisingly strong. The unique patented design has a gear driven head that makes capping a breeze since less overall force is required. This model is popular with homebrewers for several reasons. It is lighter than metal cappers. It has wider handles making it easier to operate. A built in spring allows the capping mechanism to automatically retract when capping is completed. The built-in magnet allows the cap to be positioned in the capping head and then applied to the bottle rather applying the cap on top of the bottle first.   This is made in Italy and not in China like some other red models sold on the market. We tested the Chinese models and they break more often. The Emily has been sold at MoreBeer! since our start in 1995.   Also caps American sparking wine bottles by removing and reversing the metal jaws. 

Read more less

Commercial quality beer bottle caps to keep your brew safe and sound from bottling day until you're ready to enjoy it. You will get a good firm seal that will last through transport, gift giving, and storage with these yellow bottle caps. These bottle caps crimp down onto the beer bottle and make a firm seal. They don’t rust or leak and they contain an Oxygen absorbing agent in the liner, which means you won’t get any unwanted oxidation. A good value for a great product.   26 mm diameter caps fit American bottles. Some imported bottles and some sparkling wine bottles use a 29 mm cap instead. We recommend test fitting prior to filling if you're re-using an imported bottle.   Important to note: It is recommended that you only sanitize as many caps as you'll require at the time of bottling. The oxygen-absorbing agent is activated when the cap gets wet. If wetted caps are saved for later use, they'll still function as a normal cap, but the oxygen absorbing agent may be depleted.  

Read more less

With this perfect-fit replacement gasket for your draft equipment, you’ll never have to experience the frustration of trying to “rig it” again.    This molded rubber beer line gasket is used anywhere you are mounting a tailpiece. It is placed between the tailpiece and the beer taps and/or shank.

Read more less

The first time a brewer tries out the FastRack bottle drying rack system they always say the same thing to themselves: “That is a thing of beauty!”   The FastRack bottle drying rack is the easiest way to drain, stack, and store your empties!  When bottling, use the FastRack to hold your bottles after sanitizing, and have them ready to fill with your delicious homebrew!  The FastRack takes up far less space than a bottle tree. This is a very sturdy system, and even when stacked over 4 levels tall, maintains stability!  Works for standard bottles as well as swing tops.   We sell the Fast Rack components independently, or in a handy combo pack of 1 Tray and 2 Racks.   2 FastRack Racks will hold 48 x 12 oz bottles, a full 5 gallon batch!   Compatible with 12oz bottles only.   Lowest Price Guarantee, this item has MAP pricing so you can be confident you won't find it for less.

Read more less

This handy adapter fits on standard keg couplers with its Female Beer Thread (5/8" BSP) and allows a ball lock connection on the beer side of the coupler. Made from 304 stainless steel. Kegland Part number: KL00840

Read more less

Belgian or Sparkling style glass beer bottles High pressure rating to withstand highly carbonated sours, Belgian-style beers, or sparkling wine At 16.9 ounces, this is the perfect bottle size to pour a full pint glass Three cases of 12 bottles are enough to package a 4.75 gallons of finished beer 26mm crown cap finish These high quality 500 ml (16.9 oz) Belgian / Champagne style bottles can be capped with standard crown caps (26mm).  Thicker than standard 12 and 22 oz bottles.  Ideal for lambics and other styles that have higher volumes of CO2.  3 Cases will take 4.75 gallons of beer, roughly the amount needed for a 5 gallon batch. Bottle Specifications: Capacity: 500 ml  Weight: 0.88 lb Height: 10.12 inches Outside Diameter: 2.87 inches Pressure Rating: Up to 4 volumes of carbonation.   Shipping Details:​ Case: 12 Bottles Pallet Layer: 16 Cases  Full Pallet: 64 Cases Weight: 11.75 pounds per case Case dimensions: 12"L x 9-3/8"W x 10-5/8"H

Read more less

With this handy adapter, you can easily connect a gas ball lock fitting to your Tapcooler Counter Pressure Bottle Filler! The ball lock adapter inserts into the push fit CO2 connector on the filler unit so that a gray ball lock disconnect can be connected. This is highly recommended accessory for the Tapcooler filler to make bottling quick and easy.  

Read more less

This handy adapter fits on standard keg couplers with its Female Beer Thread (5/8" BSP) and allows a ball lock connection on the gas side of the coupler. Made from 304 stainless steel. Kegland Part number: KL00833

Read more less

The Pluto Beverage Gun is the ultimate hand held beer tap!  If you have been dispensing your draft beer out of a standard picnic tap, it's time to upgrade.  Definitely one of the coolest draft beer taps that we've seen, this Pluto Beverage Gun is made from nylon and stainless steel.  The body is plastic, while the barb, piston, and spring are all stainless.  Comes with a 1/4" duotight-compatible barb perfect for use with EVABarrier draft line. You will need either the 8mm x 6.5mm or 9.5mm x 6.5mm Duotight reducer to connect the EVABarrier to the Pluto. Kegland Part number: KL00956

Read more less