Heavy-duty hose clamp suitable for 1-1/4" to 2-1/8" OD tubing
Effective and removable
Easily adjusted with a flathead screwdriver
Made from stainless steel
A heavy duty hose clamp for large OD tubing. As effective as a pre-formed clamp but without the expense or permanence.
Small hose clamp suitable for 3/16" to 5/8" OD tubing
Go-to clamp for anywhere you need to secure tubing
Made from stainless steel
These Stainless Steel small hose clamps are perfect to keep around as your go-to clamp. Use them anywhere you want to be sure your tubing will stay connected. They are perfect for silicone hoses and hooking up quick disconnects, pumps, or on any system that may need a tight seal. These stainless clamps tighten up better than cheaper ones, and the stainless steel won’t corrode. It’s handy to keep a few spares around, just in case.
Our small clamps will fit hoses with 3/16" through 5/8" OD.
Heavy-duty hose clamp suitable for 2-1/4" to 3-1/8" OD tubing
Effective and removable
Easily adjusted with a flathead screwdriver
Made from stainless steel
Stainless steel screw clamp. High quality. Fits tubing with an outer diameter between 2.25 and 3.125 inches.
Heavy-duty hose clamp suitable for 2-3/4" to 3-5/8" OD tubing
Effective and removable
Easily adjusted with a flathead screwdriver
Made from stainless steel
Strong stainless screw clamp that fits tubing with outer diameter between 2.75 and 3.625 inches.
Hose clamp suitable for 3/4" to 1-1/4" OD tubing
Go-to clamp for anywhere you need to secure tubing
Easily adjusted with a flathead screwdriver
Made from stainless steel
These Stainless Steel hose clamps are perfect to keep around as your go-to clamp. Use them anywhere you want to be sure your tubing will stay connected. They are perfect for silicone hoses and hooking up quick disconnects, pumps, or on any system that may need a tight seal. These stainless clamps tighten up better than cheaper ones, and the stainless steel won’t corrode. It’s handy to keep a few spares around, just in case.
Stainless steel hose clamp will fit hoses with 3/4" through 1-1/4" OD.
Hose clamp suitable for 3/8" to 7/8" OD tubing
Go-to clamp for anywhere you need to secure tubing
Made from stainless steel
These Stainless Steel hose clamps are perfect to keep around as your go-to clamp. Use them anywhere you want to be sure your tubing will stay connected. They are perfect for silicone hoses and hooking up quick disconnects, pumps, or on any system that may need a tight seal. These stainless clamps tighten up better than cheaper ones, and the stainless steel won’t corrode. It’s handy to keep a few spares around, just in case.
Stainless steel hose clamp will fit hoses with 3/8" through 7/8" OD.
Add a barbed connection to your Weldless Wine Cooling Plate with this hose tail and threaded nut. 1/2" female threaded with 0.51" (13mm) barb.
Sold individually. You will need 2 hose tails for both inlet and outlet.
Material: Poliammide (nylon 66)
Add a barbed connection to your Weldless Wine Cooling Plate with this hose tail and threaded nut. 1/2" female threaded with 0.62" (16mm) barb.
Sold individually. You will need 2 hose tails for both inlet and outlet.
Material: Poliammide (nylon 66)
Add a barbed connection to your Weldless Wine Cooling Plate with this 90-degree hose tail elbow and threaded nut. 1/2" female threaded with 0.47" (12mm) barb.
Sold individually. You will need 2 hose tails for both inlet and outlet.
Material: Poliammide (nylon 66)
These hot fill bladders are a great way to cut time out of your brew day using the "no chill" or "hot packing" method of cooling wort. When your boil is over, simply fill them up and wait for the wort to chill overnight or throw it in the fridge. This eliminates the traditional 30-60 minutes of chill time common in most brew days. Use the wort immediately after it has cooled down, or store refrigerated for short periods of time.
When chilled and ready to go, most brewers transfer the wort out of the bag and into their favorite fermenter. However it is possible to ferment directly in the bag with the use of a #7 stopper and airlock.
Hot packing and the storage of wort at room temperature has been done in Australia as a common practice for decades. Because of the temperature of wort entering the bag, any bacteria are killed. However there does exist a small chance of Botulism contamination for wort that is hot packed and stored. Botulism spores can survive a boil and are only killed through high temperature pasteurization. We always recommend using the wort as quickly as possible once it has cooled.
Hot fillable means they can be filled with any liquid up to 212°F.
The triple layer construction makes these bags puncture resistant, chemical resistant, and gives the bag superior oxygen barrier properties. The first layer is 50-micron polyethylene, the second is 45-micron polyethylene, and the third is 15-micron nylon.
5.2 gal / 20L capacity.
KegLand Part Number: KL18463
If you want to learn the art of homebrewing, this book is the place to start.
How To Brew contains basic information for the first time brewer and technical information for the Master Brewer. This was the first book to include legitimate in-depth information on all-grain brewing at home. The author is a passionate homebrewer and a metallurgist by trade. There is a great section on the different metals involved in brewing and how to treat and care for them. The information in this book is so valuable, you will continue to refer back to it year after year--we know we do.
This is a new and updated version of How To Brew with more emphasis on the "top five priorities":
Sanitation
Fermentation Temperature Control
Proper Yeast Management
The Boil
The Recipe
There are also 5 new chapters:
Malting and Brewing
Strong Beers
Fruit Beers
Sour Beers
Adjusting Water for Style
In How to Distill, you'll learn every aspect of home distilling, from the fundamentals to controlling flavor development to packaging.
Whether you want straightforward information for your first distillation or you’re a home distiller looking to learn more and perfect your craft, you’ve come to the right place. In this book, certified industry expert and knowledgeable home distiller Aaron Hyde lays out the how and why of all the key processes, starting at the mash and fermentation, through distilling, and ending with expert information on aging and blending spirits. You’ll find:
An Overview of Distilling and the Process: The fundamentals of distillation, concise distillation theory, still design, distilled products, and ingredients are all covered.
Pre-Distillation: Move on to learn about the fermentation process, making your own wash from sugar or cereal mashing grain.
Distilling: The main event! A robust section on distilling covers modern distillation techniques, the distillation process, key decisions during distillation, process control, collection, and further distillation runs.
Post-Distillation: Work your way through flavor development and control, polishing spirit, the aging process, quality considerations, blending, and packaging considerations.
Recipes: Whether you're interested in making bourbon whiskey, scotch whisky, gin, rum, or vodka, you’ll find an easy-to-follow recipe.
With reliable, tested information throughout, this is the new standard for distilling.
Cubes have a longer contact time than traditional chips do, which make them better for long-term aging of wines and beers. Also, longer contact time means longer extraction of flavors (3-6 months), which leads to a more complex combination of flavors. Chips are usually done giving flavor after a week, there by contributing a harsh, flat oak flavor. Our cubes are fires toasted and cut by Stavin, a leading supplier of high-quality oak alternatives to top commercial wineries. Download the PDF
This recipe kit makes a light, refreshing mead. Hydromel literally means "Honey Water" in Greek. The term "hydromel" is a way of describing the low strength of alcohol in this mead kit. This kit is a very basic introduction to mead. Estimated alcohol is 5-7%. A perfect choice to carbonate in the bottle or kegs. Dry Yeast Recommendation: DV10: Strong and clean, stays true to original honey's flavours and aromas. QA23: Aromatic / Floral, great bouquet (a bit more lean and focused than R2) W15: Great aromatic profile (true to the honey source) and heavy mouthfeel. Includes our simple, step-by-step two page instructions, which will teach you the basics of making mead. This kit does not include yeast. Please see our recommendations above.
A clear, single piece sample jar that is not glued together. Made from a single piece mold, it is 10" tall and capable of holding our standard hydrometer perfectly (and inexpensively!). You will want to look at a taller hydrometer jars for specific range hydrometers.
This hydrometer will work with spirits.
The perfect size for taking hydrometer readings of your home brew--large enough to get a good reading, but small enough to not waste that precious beer!
Two piece molded plastic allows for easy cleaning. Will work with any of our hydrometers except the specialized +5/-5 Brix wine hydrometer.
If you want to take a gravity reading of your latest brew, this extra-tall Hydrometer Jar will make the job easy.
This extra-tall 14" Hydrometer Jar is perfect for a brix hydrometer. Because the jar is clear, you’ll be able to easily see the markings on the hydrometer and the color of your brew.
An amazing Centennial hop bomb of an IPA modeled after Bell's Brewery Two Hearted® American IPA
Includes 100% Centennial hops from boil to dry hop
Estimated ABV: 5.8%
Estimated IBUs: 45-48
Makes 5 gallons of finished beer
An amazing IPA derived from one of our favorites, Bell's Two Hearted, the I Heart IPA is a true Centennial hop bomb! Using Centennial as the bittering, aroma, and dry hop additions gives you a true understanding of how incredible and universal this hop can be.
Light in color and body, the malt character hides a little, allowing the burst of Centennial flavor and aroma shine. Our Bell's Two Hearted clone recipe has a slightly lower original gravity than the original. Coming in at right around 6% ABV, this isn't one of those IPAs that will make you shy away from a second!
Makes 5 gallons
Estimated Original Gravity: 1.058-1.062
SRM (Color Range): 5-7
Estimated IBUs: 45-48
Estimated Alcohol Percentage: 5.8%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts.
An amazing Centennial hop bomb of an IPA modeled after Bell's Brewery Two Hearted® American IPA
Includes 100% Centennial hops from boil to dry hop
Estimated ABV: 5.8%
Estimated IBUs: 45-48
Makes 5 gallons of finished beer
An amazing IPA derived from one of our favorites, the I Heart IPA is a true Centennial hop bomb! Using Centennial as the bittering, aroma, and dry hop additions gives you a true understanding of how incredible and universal this hop can be.
Light in color and body, the malt character hides a little, allowing the burst of Centennial flavor and aroma shine. Our Bell's Two Hearted clone recipe has a slightly lower original gravity than the original. Coming in at right around 6% ABV, this isn't one of those IPAs that will make you shy away from a second!
Makes 5 gallons
Estimated Original Gravity: 1.058-1.062
SRM (Color Range): 5-7
Estimated IBUs: 45-48
Estimated Alcohol Percentage: 5.8%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All included steeping grains will come milled.
Liquid Malt Extract (LME) vs. Dried Malt Extract (DME)
MoreBeer! recipe kits are offered in both Liquid Malt Extract and Dry Malt Extract so that our customers can choose the format that best suits their needs and brewing style. LME is a viscous liquid, similar in consistency to maple syrup. In addition to being the more affordable option, many brewers find LME easier to handle than dry extract. DME is more condensed and comes in a powder format that is similar to baking flour. Although it’s a little more costly, DME is naturally lighter in color and stays fresher for longer. We highly recommend DME when brewing light colored beers.
Effective against a broad spectrum of bacteria, viruses, and fungi. Thoroughly sanitizes surfaces. No rinse is required after use of this product. Combining the powerful action of iodine, I-O-SAFE is ideal for use wherever sanitizing problems occur. Highly effective against a broad spectrum of bacteria, viruses, and fungi commonly encountered in food processing plants. Surfaces treated with I-O-SAFE are thoroughly sanitized, brightened, and ready to return to operation. No rinse is required after use of this product. EPA Reg : 4959-15-12446 Specifications: Appearance: Liquid Weight per gallon: 9.45 pounds Color: Brown Odor: Iodine pH: <1.5 Chemical Stability: Stable Biodegradability: Complete Dilute to 1 oz per 5 gal of water Please note: Intended for commercial use. Due to HAZMAT shipping restrictions, this product is required to ship via freight. It will ship directly from the manufacturer on its own pallet. If you order multiple SIS products, they will be condensed onto a single pallet, unless your order also contains sanitizers. Sanitizers must be shipped on a separate pallet from caustics and acids. HAZMAT items are not able to be returned.
Stainless steel IBC tanks provide a reliable solution in beverage making for storage, mixing, fermentation, and transportation Designed with a palletized base, built-in forklift channels, and a sturdy galvanized cage for easy movement and stacking up to 2-high Made from high-quality 304 stainless steel, ensuring durability and a hygienic environment for fermenting or aging beverages Lid features a 1.5" T.C. ferrule, allowing for the addition of a spunding valve, CIP spray ball, or other accessories Full draining bottom outlet with a 1.5" T.C. butterfly valve for efficient liquid transfer External cooling jacket with 1.5" T.C. inlet and outlet Also available without the cooling jacket Stainless steel IBC tanks provide a reliable solution in beverage making for storage, mixing, fermentation and transportation. Crafted from high-quality 304 stainless steel, these tanks ensure an airtight, hygienic environment that preserves the quality of both raw ingredients and finished beverages. The built-in forklift channels and robust outer cage make them easy to move around your facility, even when full, and allow them to be stacked on top of each other 2-high. These tanks feature a wide 15.75" lid opening with a 1.5" tri-clamp ferrule in the lid, allowing you to add a spunding valve for fermentation or CIP spray ball of cleaning. The 1.5" T.C. bottom outlet includes a stainless steel butterfly valve. Stainless steel IBC tote 1,000 L / 265 Gallons / 8.5 bbl capacity 1040L / 275 gallons Nominal Capacity (filled to brim) Welded cooling jacket with 1.5" T.C. In/Out 2mm thick 304 stainless steel Passivated Internal BA finish External satin finish Full draining bottom with 1.5" T.C. butterfly valve Upper lid diameter: 15.75" (400mm) 1.5" T.C. ferrule in lid Palletized base with fork lift slots Galvanized cage 44.6" x 44.6" x 57.4" Please Note: Do not stack more than 2 tanks, even when empty. Only move one tank at a time. Never move stacked tanks whether full or empty. The tank must be handled by means of the forks only from the front side. Never use the forks from the side.
Stainless steel IBC tanks provide a reliable solution in beverage making for storage, mixing, fermentation, and transportation Designed with a palletized base, built-in forklift channels, and a sturdy galvanized cage for easy movement and stacking up to 2-high Made from high-quality 304 stainless steel, ensuring durability and a hygienic environment for fermenting or aging beverages Lid features a 1.5" T.C. ferrule, allowing for the addition of a spunding valve, CIP spray ball, or other accessories Full draining bottom outlet with a 1.5" T.C. butterfly valve for efficient liquid transfer Also available with an optional cooling jacket Stainless steel IBC tanks provide a reliable solution in beverage making for storage, mixing, fermentation and transportation. Crafted from high-quality 304 stainless steel, these tanks ensure an airtight, hygienic environment that preserves the quality of both raw ingredients and finished beverages. The built-in forklift channels and robust outer cage make them easy to move around your facility, even when full, and allow them to be stacked on top of each other 2-high. These tanks feature a wide 15.75" lid opening with a 1.5" tri-clamp ferrule in the lid, allowing you to add a spunding valve for fermentation or CIP spray ball for cleaning. The 1.5" T.C. bottom outlet includes a stainless steel butterfly valve. Stainless steel IBC tote 1,000 L / 265 G / 8.5 bbl capacity 1040L / 275 G Nominal capacity (filled to brim) 2mm thick 304 stainless steel Passivated Internal BA finish External satin finish Full draining bottom with 1.5" T.C. butterfly valve Upper lid diameter: 15.75" (400mm) 1.5" T.C. ferrule in lid Palletized base with fork lift slots Galvanized cage 44.6" x 44.6" x 57.4" Please Note: Do not stack more than 2 tanks, even when empty. Only move one tank at a time. Never move stacked tanks whether full or empty. The tank must be handled by means of the forks only from the front side. Never use the forks from the side.
Includes 4 ice packs and an insulated mailer to help keep your liquid yeast cold during transit. The Insulated Mailer option is a great way to extend the length of time your ice remains cool! These special envelopes contain self expanding foam, which creates a form-fitting container that protects and insulates liquid yeast. This upgrade includes the Insulating Envelope and 4 Ice Packs.
This option fits a number of yeast vials, pouches, or cans, and is made from thick foam insulation. Because different yeast take up different space, each producer will fit a different quantity in this mailer. See the chart below for what quantity of what yeast will fit inside.
Yeast Producer / Brand
Quantity that will fit in Insulated Mailer
White Labs
12
Wyeast
12
Imperial Yeast
12
Omega
12
If you aren't ordering this many yeast and want a smaller insulated mailer, check out our ICE1.
To purchase, simply add however many Insulated Mailers will be needed to contain however many yeast are in your cart.
Please Note! Any additional yeast will be shipped outside of the mailer. This option includes ice, and no additional ice needs to be purchased.
Please note - Liquid yeast will not arrive cold even when shipped with ice packs. Ice packs and insulated mailing options are designed to keep the yeast colder for longer during shipment, but they will not ensure that your yeast arrives cold. We will not replace liquid yeast that arrives warm. During warmer months we strongly recommend you choose dry yeast.
Includes 2 ice packs and an insulated mailer to help keep your liquid yeast cold during transit. The Insulated Mailer option is a great way to extend the length of time your ice remains cool! These special envelopes contain self expanding foam, which creates a form-fitting container that protects and insulates liquid yeast. This upgrade includes the Insulating Envelope and 2 Ice Packs.
This option fits a number of yeast vials, pouches, or cans, and is made from thick foam insulation. Because different yeast take up different space, each producer will fit a different quantity in this mailer. See the chart below for what quantity of what yeast will fit inside.
Yeast Producer / Brand
Quantity that will fit in Insulated Mailer
White Labs
3
Imperial Yeast
3
Wyeast
3
Omega
3
To purchase, simply add however many Insulated Mailers will be needed to contain however many yeast are in your cart.
Please Note! Any additional yeast will be shipped outside of the mailer. This option includes ice, and no additional ice needs to be purchased.
Please note - Liquid yeast will not arrive cold even when shipped with ice packs. Ice packs and insulated mailing options are designed to keep the yeast colder for longer during shipment, but they will not ensure that your yeast arrives cold. We will not replace liquid yeast that arrives warm. During warmer months we strongly recommend you choose dry yeast.
An ice pack wrapped up with your liquid yeast to help extend the time that the yeast stays cool in transit. Cool temps help keep the viability of the yeast higher which in turns leads to faster fermentation start times and better beer. For an even better solution consider our insulated mailer with 2 ice packs. Please note - Liquid yeast will not arrive cold even when shipped with ice packs. Ice packs and insulated mailing options are designed to keep the yeast colder for longer during shipment, but they will not ensure that your yeast arrives cold. We will not replace liquid yeast that arrives warm. During warmer months we strongly recommend you choose dry yeast.
Idaho #7 hops are known for their piney, tropical, fruity, citrusy, earthy, and floral flavors and aromas. Typically used as an Aroma/Flavor hop with high alpha acid levels and average cohumulone content. Its strong hop character makes it ideal for IPAs, APAs and any other hop forward beer. Suggested as a single hop or for blending as a late addition. The high oil content and soft pelletizing process make this ideal for dry hopping and whirlpool.
Hop Statistics:
Alpha Acids: 10 – 14.9%
Beta Acids: 4.0 – 5.0%
Total Oils in mls per 100 grams dried: 1.0 – 1.6
Storage(% alpha acids remaining after 6 months storage at 68° F): 60 - 65%
Similar Hop Varieties: Amarillo® hops, Chinook, Columbus
Amarillo® is a trademark owned by Virgil Gamache Farms, Inc.
Ambient Flowability: Effortlessly flows at room temperature for easy, hassle-free additions without pre-heating.
Increased Wort Yield: Boosts yield by up to 5% by significantly reducing trub and solid matter in the whirlpool.
Amplified Aromatics: Highly soluble extract designed to deliver concentrated, variety-specific hop character.
Logistical Efficiency: Streamlines operations by reducing shipping costs and requiring less cold storage space.
Formerly YCH 702, DynaBoost is an oil-enriched extract that flows effortlessly at ambient temperatures.
DynaBoost was crafted as a hassle-free whirlpool addition that amplifies aromatics through a concentration of wort-soluble compounds. Thanks to that solubility, you get less solid matter impacting your waste stream and more wort heading to your fermenter, with some brewers reporting up to a 5% increase in wort yield.
Chief Advantages:
Easy to use
Flowable at room temperature
Increase hot side yield
Reduction of solid matter in the whirlpool and waste stream
Shipping and storage space reduction
How to Brew with DynaBoost?
DynaBoost serves as a versatile companion in the brewhouse, adding a rich and dynamic hop character to your beer. This exceptionally flowable oil extract delivers varietal hop characteristics to your brew through a high concentration of beer-soluble compounds. Thanks to its solubility, brewers may see an increase in wort yield due to a reduction in trub.
Kettle: DynaBoost carries variety-specific alpha acid content and can be used both as an early bittering addition, or a late aroma addition in the kettle.
Post-Boil / Whirlpool: DynaBoost was specifically designed to boost aromatics as a whirlpool addition. The wort soluble oil extract will deliver variety-specific aroma attributes and minimize trub, potentially increasing your whirlpool yield.
Fermentation: DynaBoost requires contact time with hot liquid to incorporate into wort or fermenting beer. For that reason, brewers who choose to use DynaBoost in the fermenter often use a "dip hop" method, where a small portion of the wort is transferred to the fermenter hot (170-200°F) along with DynaBoost. The hot wort and DynaBoost mixture is then allowed to stand for a short period before the main knockout at fermentation temperature, after which yeast can be pitched.
Dry Hopping: DynaBoost was not intended to be used as a dry-hop addition. Instead, it is recommended to replace 25-50% of dry hop additions with HyperBoost™, leaving up to 50% of the additions as T-90 or Cryo Hops® pellets.
Idaho 7® is a registered trademark owned by Jackson Hop Farm.
DynaBoost® is a registered trademark owned by Yakima Chief Hops, LLC.
Maximize Finished Yield: Reduces beer loss and waste by replacing bulky hop pellets with a highly concentrated liquid extract.
Intense Hop Aromatics: Delivers variety-specific, "survivable" hop compounds for a powerful aromatic boost in every batch.
Versatile Cold-Side Use: Designed for easy pouring into the fermenter during active or post-fermentation dry hopping and whirlpool additions.
Superior Efficiency: Streamlines logistics with a compact footprint and high replacement rates—up to 100:1 compared to T-90 pellets.
HyperBoost®, formerly YCH 701, is a concentrated hop oil extract produced through an innovative CO2 supercritical extraction process.
Intended to amplify hop aromatics and increase yield, HyperBoost excels at adding beautiful hop aroma anywhere pellets are normally used, including cold-side applications. HyperBoost is made from single-hop varieties to deliver variety-specific aroma boosts to your finished beer.
Chief Advantages:
Increased efficiency
Ease of use
Increased aroma
Less storage space needed
High concentrations of survivable compounds
Reduction of waste
How to Brew with HyperBoost?
HyperBoost® is designed to easily pour in your fermenter as a dry hop addition, adding an intense saturation of hop flavor to your finished beer. Most brewers choose to use HyperBoost during active fermentation, but it can also be added to the whirlpool. Using HyperBoost in place of traditional pellets can increase finished beer yield.
Kettle: HyperBoost is not intended for kettle additions. For early kettle and bittering additions, we recommend pellets or CO2 extract. DynaBoost® carries variety-specific oil and alpha acid content to the kettle and can be used as a late kettle addition.
Post-Boil / Whirlpool: For whirlpool use, brewers can replace up to 100% of pellets with HyperBoost. We suggest replacing T-90 pellet additions in the whirlpool at a rate of 50:1 by weight (20 g of HyperBoost to replace 1 kg T-90). Your brewery might choose to use more or less depending on beer style or overall goal.
Fermentation: HyperBoost can be used as an active or post-fermentation hop addition. Incorporate HyperBoost anywhere in the process you would typically use pellets.
Dry Hopping: For dry hop additions, YCH recommends using HyperBoost for 25-50% of the addition and adding T-90 or Cryo® pellets for the remainder of the hop charge. As a dry hop, we suggest starting with a replacement rate of 100:1 HyperBoost to T-90 pellets by weight (10 g HyperBoost in place of 1 kg T-90) to 125:1 (8 g HyperBoost in place of 1 kg T-90).
Idaho 7® is a registered trademark owned by Jackson Hop Farm.
HyperBoost® is a registered trademark owned by Yakima Chief Hops, LLC.
Idaho 7®'s strong hoppiness makes it well suited for single hop beers or easily blended with late additions in IPAs, Pale Ales, and Hazys
Aroma Profile: Berry, Bubblegum, Citrus, Stone Fruit, Tropical
Alpha Acids: 21.0 – 26.0%
Cryo Hop® Hop Pellets
Roughly twice as poetent as traditional T-90 hop pellets; dose at a rate of 40-50%
Increase yield by reducing beer loss to vegetal matter in your brewhouse and fermenter
Cryo Hops® provide brewers with the ability to get gigantic hop character while reducing astringent and unpleasant vegetal flavors. With a substantially higher oil and resin content, LupuLN2 powder offers up all the flavor and aroma of a heavily hopped beer, but with a significanly reduced grassy character. Additionally, the lower dosage rate of the concentrated powder reduces the volume of trub and therefore, kettle loss. Using Cryo Hops® you will net more beer that is clearer!
Typical usage of Cryo Hops® would be roughly 50% of pellets. LupuLN2 powder can be used in any application where traditional hop products are utilized, including: Bittering, Kettle, Whirlpool and even direct to the fermentor. It is suggested that you use Cryo Hops® as late additions, in the whirlpool or dry hop, as the volatile aromatic compounds will be driven off if added early in the boil.
Cryo Hops® are an innovative hop product that is made by separating the lupulin from the hop flower using cryogenic processing. The result is a product with twice the potency of T90 pellets, with reduced astringency and vegetative material.
Note: These hops come pelletized. The powder is compressed into pellet form to make handling easier.
Typical Hop Statistics:
Alpha Acids: 21.0 – 26.0%
Beta Acids: 7.0 – 10.0%
Total Oil: 2.5 – 4.5%
Idaho 7® is a registered trademark owned by Jackson Hop Farm.
Cryo Hops® are registered trademark owned by Yakima Chief Hops.
Idaho Gem™ is a remarkable hop of unknown lineage. It was found by Gooding Farms in Parma, and aptly named after its home state. This treasured dual-purpose hop is loaded with sweet, fruit-forward aromatic oils that make it prime for late kettle and dry hopping additions. Use liberally in Pale Ales, IPA's and NEIPA's. Idaho Gem™ will dazzle you with flavors of pineapple, cherry, and candied fruit, with an herbal and spicy aroma.
Hop Statistics
Alpha Acids: 12 – 14%
Beta Acids: 5 – 7%
Alpha-Beta Ratio: 1.7 - 2.8
Cohumulone: (% of alpha acids): 1.3 – 2%
Total Oils in mls per 100 grams dried: 40 – 45
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory.
Adjustable filling height with automatic stop
Stainless steel base, frame, and filling nozzle
Adjustable filling level and filling speed
Vacuum gauge
The Ultrafiller 1 is built entirely in stainless steel with PYREX tank, featuring high efficiency and precision stainless steel filling nozzle. This professional bottling machine is perfect for wine, uncarbonated beer or cider, spirits, and oils. When you place the bottle under the Ultrafiller 1, the fluid is sucked into the vacuum created inside it, without any contact between the liquid and the pumps or mechanical components.
Why Choose ILTEC
While the Enolmatic has served as a great economical option, the ILTEC offers a significant step up in overall quality and durability. The key differences speak for themselves:
Stainless Steel Construction: Unlike the Enolmatic's plastic components, the ILTEC boasts a robust stainless steel construction, ensuring long-lasting performance and easy sanitation.
Borosilicate Vacuum Chamber: The ILTEC utilizes a borosilicate vacuum chamber, a superior alternative to the plastic chamber found in the Enolmatic. Borosilicate glass is known for its exceptional resistance to thermal shock and chemical corrosion, guaranteeing a cleaner and more efficient filling process.
The ILTEC filler isn't just about superior materials; it's about delivering consistent, precise, and professional results. Whether you're bottling wine, spirits, oils, or other liquids, the ILTEC provides the performance you demand.
Specs:
Capacity: 250-300 x 750mL bottles per hour*
Bottle Neck Diameter: 16-34mm
Bottle Height: 3.9" to 13.75" (100-350mm)
Tank Alcohol Tolerance: 80% ABV
Max Temperature: 176°F (80°C)
Dimensions: 7.8" x 19" 16.5" (200 x 485 x 420mm)
Weight: 24.5 lbs
Power: 110V, 60hZ, 80W
*Capacity may change depending on liquid and bottle size.
Adjustable filling height with automatic stop
Stainless steel base, frame, and filling nozzles
Adjustable filling level and filling speed
Vacuum gauge
The Ultrafiller 2 is built entirely in stainless steel with PYREX tank, featuring two high efficiency and precision stainless steel filling nozzles. This professional bottling machine is perfect for wine, uncarbonated beer or cider, spirits, and oils. When you place the bottle under the Ultrafiller 2, the fluid is sucked into the vacuum created inside it, without any contact between the liquid and the pumps or mechanical components.
Why Choose ILTEC
While the Enolmatic has served as a great economical option, the ILTEC offers a significant step up in overall quality and durability. The key differences speak for themselves:
Stainless Steel Construction: Unlike the Enolmatic's plastic components, the ILTEC boasts a robust stainless steel construction, ensuring long-lasting performance and easy sanitation.
Borosilicate Vacuum Chamber: The ILTEC utilizes a borosilicate vacuum chamber, a superior alternative to the plastic chamber found in the Enolmatic. Borosilicate glass is known for its exceptional resistance to thermal shock and chemical corrosion, guaranteeing a cleaner and more efficient filling process.
The ILTEC filler isn't just about superior materials; it's about delivering consistent, precise, and professional results. Whether you're bottling wine, spirits, oils, or other liquids, the ILTEC provides the performance you demand.
Specs:
Capacity: 400 x 750mL bottles per hour*
Bottle Neck Diameter: 16-34mm
Bottle Height: 7" to 13.75" (180-350mm)
Tank Alcohol Tolerance: 80% ABV
Max Temperature: 176°F (80°C)
Dimensions: 13" x 21.6" 16.5" (330 x 550 x 420mm)
Weight: 42.3 lbs
Power: 110V, 60hZ, 125W
*Capacity may change depending on liquid and bottle size.
Adjustable filling height with automatic stop
Stainless steel base, frame, and filling nozzles
Adjustable filling level and filling speed
Vacuum gauge
The Ultrafiller 2 is built entirely in stainless steel with PYREX tank, featuring two high efficiency and precision stainless steel filling nozzles. This professional bottling machine is perfect for wine, uncarbonated beer or cider, spirits, and oils. When you place the bottle under the Ultrafiller 2, the fluid is sucked into the vacuum created inside it, without any contact between the liquid and the pumps or mechanical components.
Why Choose ILTEC
While the Enolmatic has served as a great economical option, the ILTEC offers a significant step up in overall quality and durability. The key differences speak for themselves:
Stainless Steel Construction: Unlike the Enolmatic's plastic components, the ILTEC boasts a robust stainless steel construction, ensuring long-lasting performance and easy sanitation.
Borosilicate Vacuum Chamber: The ILTEC utilizes a borosilicate vacuum chamber, a superior alternative to the plastic chamber found in the Enolmatic. Borosilicate glass is known for its exceptional resistance to thermal shock and chemical corrosion, guaranteeing a cleaner and more efficient filling process.
The ILTEC filler isn't just about superior materials; it's about delivering consistent, precise, and professional results. Whether you're bottling wine, spirits, oils, or other liquids, the ILTEC provides the performance you demand.
Specs:
Capacity: 400 x 750mL bottles per hour*
Bottle Neck Diameter: 16-34mm
Bottle Height: 7" to 13.75" (180-350mm)
Tank Alcohol Tolerance: 80% ABV
Max Temperature: 176°F (80°C)
Dimensions: 13" x 21.6" 16.5" (330 x 550 x 420mm)
Weight: 42.3 lbs
Power: Compressed Air
*Capacity may change depending on liquid and bottle size.
Completely dedicated to thicker liquids, such as tomato sauce
Adjustable filling height with automatic stop
Stainless steel base, frame, and filling nozzles
Adjustable filling level and filling speed
Vacuum gauge
This filler is the version of the Ultrafiller completely dedicated to denser liquids, such as tomato puree and other sauces. Various modifications applied to the standard machine allow bottles to be filled quickly and easily. Thanks to the larger rubber cone, it is possible to fill both bottles with crown caps and those with screw caps. The pneumatic version is the most powerful machine ever seen on the market—allowing for fast filling even with the thickest sauces.
The Ultrafiller Pomodoro is built entirely in stainless steel with PYREX tank, featuring four high efficiency and precision stainless steel filling nozzles. When you place the bottle under the Ultrafiller Pomodoro, the fluid is sucked into the vacuum created inside it, without any contact between the liquid and the pumps or mechanical components.
Why Choose ILTEC
While the Enolmatic has served as a great economical option, the ILTEC offers a significant step up in overall quality and durability. The key differences speak for themselves:
Stainless Steel Construction: Unlike the Enolmatic's plastic components, the ILTEC boasts a robust stainless steel construction, ensuring long-lasting performance and easy sanitation.
Borosilicate Vacuum Chamber: The ILTEC utilizes a borosilicate vacuum chamber, a superior alternative to the plastic chamber found in the Enolmatic. Borosilicate glass is known for its exceptional resistance to thermal shock and chemical corrosion, guaranteeing a cleaner and more efficient filling process.
The ILTEC filler isn't just about superior materials; it's about delivering consistent, precise, and professional results. Whether you're bottling wine, spirits, oils, or other liquids, the ILTEC provides the performance you demand.
Specs:
Capacity: 400 x 750mL bottles per hour*
Bottle Neck Diameter: 26-65mm
Bottle Height: 7" to 13.75" (180-350mm)
Tank Alcohol Tolerance: 80% ABV
Max Temperature: 176°F (80°C)
Dimensions: 19.6" x 21.6" 16.5" (500 x 550 x 420mm)
Weight: 55.1 lbs
Power: 110V, 60hZ, 125W
*Capacity may change depending on liquid and bottle size.
Completely dedicated to thicker liquids, such as tomato sauce
Adjustable filling height with automatic stop
Stainless steel base, frame, and filling nozzles
Adjustable filling level and filling speed
Vacuum gauge
This filler is the version of the Ultrafiller completely dedicated to denser liquids, such as tomato puree and other sauces. Various modifications applied to the standard machine allow bottles to be filled quickly and easily. Thanks to the larger rubber cone, it is possible to fill both bottles with crown caps and those with screw caps. The pneumatic version is the most powerful machine ever seen on the market—allowing for fast filling even with the thickest sauces.
The Ultrafiller Pomodoro is built entirely in stainless steel with PYREX tank, featuring four high efficiency and precision stainless steel filling nozzles. When you place the bottle under the Ultrafiller Pomodoro, the fluid is sucked into the vacuum created inside it, without any contact between the liquid and the pumps or mechanical components.
Why Choose ILTEC
While the Enolmatic has served as a great economical option, the ILTEC offers a significant step up in overall quality and durability. The key differences speak for themselves:
Stainless Steel Construction: Unlike the Enolmatic's plastic components, the ILTEC boasts a robust stainless steel construction, ensuring long-lasting performance and easy sanitation.
Borosilicate Vacuum Chamber: The ILTEC utilizes a borosilicate vacuum chamber, a superior alternative to the plastic chamber found in the Enolmatic. Borosilicate glass is known for its exceptional resistance to thermal shock and chemical corrosion, guaranteeing a cleaner and more efficient filling process.
The ILTEC filler isn't just about superior materials; it's about delivering consistent, precise, and professional results. Whether you're bottling wine, spirits, oils, or other liquids, the ILTEC provides the performance you demand.
Specs:
Capacity: 400 x 750mL bottles per hour*
Bottle Neck Diameter: 26-65mm
Bottle Height: 7" to 13.75" (180-350mm)
Tank Alcohol Tolerance: 80% ABV
Max Temperature: 176°F (80°C)
Dimensions: 19.6" x 21.6" 16.5" (500 x 550 x 420mm)
Weight: 55.1 lbs
Power: 110V, 60hZ, 125W
*Capacity may change depending on liquid and bottle size.
Completely dedicated to thicker liquids, such as tomato sauce
Adjustable filling height with automatic stop
Stainless steel base, frame, and filling nozzles
Adjustable filling level and filling speed
Vacuum gauge
This filler is the version of the Ultrafiller completely dedicated to denser liquids, such as tomato puree and other sauces. Various modifications applied to the standard machine allow bottles to be filled quickly and easily. Thanks to the larger rubber cone, it is possible to fill both bottles with crown caps and those with screw caps. This pneumatic version is the most powerful machine ever seen on the market—allowing for fast filling even with the thickest sauces.
The Ultrafiller Pomodoro is built entirely in stainless steel with PYREX tank, featuring four high efficiency and precision stainless steel filling nozzles. When you place the bottle under the Ultrafiller Pomodoro, the fluid is sucked into the vacuum created inside it, without any contact between the liquid and the pumps or mechanical components.
Why Choose ILTEC
While the Enolmatic has served as a great economical option, the ILTEC offers a significant step up in overall quality and durability. The key differences speak for themselves:
Stainless Steel Construction: Unlike the Enolmatic's plastic components, the ILTEC boasts a robust stainless steel construction, ensuring long-lasting performance and easy sanitation.
Borosilicate Vacuum Chamber: The ILTEC utilizes a borosilicate vacuum chamber, a superior alternative to the plastic chamber found in the Enolmatic. Borosilicate glass is known for its exceptional resistance to thermal shock and chemical corrosion, guaranteeing a cleaner and more efficient filling process.
The ILTEC filler isn't just about superior materials; it's about delivering consistent, precise, and professional results. Whether you're bottling wine, spirits, oils, or other liquids, the ILTEC provides the performance you demand.
Specs:
Capacity: 400 x 750mL bottles per hour*
Bottle Neck Diameter: 26-65mm
Bottle Height: 7" to 13.75" (180-350mm)
Tank Alcohol Tolerance: 80% ABV
Max Temperature: 176°F (80°C)
Dimensions: 19.6" x 21.6" 16.5" (500 x 550 x 420mm)
Weight: 55.1 lbs
Power: Compressed Air
*Capacity may change depending on liquid and bottle size.
Adjustable filling height with automatic stop
Stainless steel base, frame, and filling nozzles
Adjustable filling level and filling speed
Vacuum gauge
Removable spouts for hand filling bottles away from the platform (left-hand and right-hand spouts only)
The Mixed Ultrafiller 4 combines 2 standard spouts with 2 two small spouts for the best compromise for those who bottle small batches with a great variety in bottle shapes and sizes. The spouts on the far left and right sides are removable, allowing you to hand-fill uniquely shaped bottles that don't fit on the platform.
The Ultrafiller 4 is built entirely in stainless steel with PYREX tank, featuring four high efficiency and precision stainless steel filling nozzles. This professional bottling machine is perfect for wine, uncarbonated beer or cider, spirits, and oils. When you place the bottle under the Ultrafiller 4, the fluid is sucked into the vacuum created inside it, without any contact between the liquid and the pumps or mechanical components.
Why Choose ILTEC
While the Enolmatic has served as a great economical option, the ILTEC offers a significant step up in overall quality and durability. The key differences speak for themselves:
Stainless Steel Construction: Unlike the Enolmatic's plastic components, the ILTEC boasts a robust stainless steel construction, ensuring long-lasting performance and easy sanitation.
Borosilicate Vacuum Chamber: The ILTEC utilizes a borosilicate vacuum chamber, a superior alternative to the plastic chamber found in the Enolmatic. Borosilicate glass is known for its exceptional resistance to thermal shock and chemical corrosion, guaranteeing a cleaner and more efficient filling process.
The ILTEC filler isn't just about superior materials; it's about delivering consistent, precise, and professional results. Whether you're bottling wine, spirits, oils, or other liquids, the ILTEC provides the performance you demand.
Specs:
Capacity: 500-600 bottles per hour*
Bottle Neck Diameter:
Standard Spouts: 16-34mm
Small Spouts: 9-34mm
Bottle Height:
Standard Spouts: 7" to 13.75" (180-350mm)
Small Spouts: 3.9" to 9.8" (100-250mm)
Tank Alcohol Tolerance: 80% ABV
Max Temperature: 176°F (80°C)
Dimensions: 19.6" x 21.6" 16.5" (500 x 550 x 420mm)
Weight: 55.1 lbs
Power: 110V, 60hZ, 125W
*Capacity may change depending on liquid and bottle size.
Adjustable filling height with automatic stop
Stainless steel base, frame, and filling nozzles
Adjustable filling level and filling speed
Vacuum gauge
Removable spouts for hand filling bottles away from the platform (left-hand and right-hand spouts only)
The Mixed Ultrafiller 4 combines 2 standard spouts with 2 two small spouts for the best compromise for those who bottle small batches with a great variety in bottle shapes and sizes. The spouts on the far left and right sides are removable, allowing you to hand-fill uniquely shaped bottles that don't fit on the platform.
The Ultrafiller 4 is built entirely in stainless steel with PYREX tank, featuring four high efficiency and precision stainless steel filling nozzles. This professional bottling machine is perfect for wine, uncarbonated beer or cider, spirits, and oils. When you place the bottle under the Ultrafiller 4, the fluid is sucked into the vacuum created inside it, without any contact between the liquid and the pumps or mechanical components.
Why Choose ILTEC
While the Enolmatic has served as a great economical option, the ILTEC offers a significant step up in overall quality and durability. The key differences speak for themselves:
Stainless Steel Construction: Unlike the Enolmatic's plastic components, the ILTEC boasts a robust stainless steel construction, ensuring long-lasting performance and easy sanitation.
Borosilicate Vacuum Chamber: The ILTEC utilizes a borosilicate vacuum chamber, a superior alternative to the plastic chamber found in the Enolmatic. Borosilicate glass is known for its exceptional resistance to thermal shock and chemical corrosion, guaranteeing a cleaner and more efficient filling process.
The ILTEC filler isn't just about superior materials; it's about delivering consistent, precise, and professional results. Whether you're bottling wine, spirits, oils, or other liquids, the ILTEC provides the performance you demand.
Specs:
Capacity: 500-600 bottles per hour*
Bottle Neck Diameter:
Standard Spouts: 16-34mm
Small Spouts: 9-34mm
Bottle Height:
Standard Spouts: 7" to 13.75" (180-350mm)
Small Spouts: 3.9" to 9.8" (100-250mm)
Tank Alcohol Tolerance: 80% ABV
Max Temperature: 176°F (80°C)
Dimensions: 19.6" x 21.6" 16.5" (500 x 550 x 420mm)
Weight: 55.1 lbs
Power: Compressed Air
*Capacity may change depending on liquid and bottle size.
Adjustable filling height with automatic stop
Stainless steel base, frame, and filling nozzles
Adjustable filling level and filling speed
Vacuum gauge
The Ultrafiller 4 is built entirely in stainless steel with PYREX tank, featuring four high efficiency and precision stainless steel filling nozzles. This professional bottling machine is perfect for wine, uncarbonated beer or cider, spirits, and oils. When you place the bottle under the Ultrafiller 4, the fluid is sucked into the vacuum created inside it, without any contact between the liquid and the pumps or mechanical components.
Why Choose ILTEC
While the Enolmatic has served as a great economical option, the ILTEC offers a significant step up in overall quality and durability. The key differences speak for themselves:
Stainless Steel Construction: Unlike the Enolmatic's plastic components, the ILTEC boasts a robust stainless steel construction, ensuring long-lasting performance and easy sanitation.
Borosilicate Vacuum Chamber: The ILTEC utilizes a borosilicate vacuum chamber, a superior alternative to the plastic chamber found in the Enolmatic. Borosilicate glass is known for its exceptional resistance to thermal shock and chemical corrosion, guaranteeing a cleaner and more efficient filling process.
The ILTEC filler isn't just about superior materials; it's about delivering consistent, precise, and professional results. Whether you're bottling wine, spirits, oils, or other liquids, the ILTEC provides the performance you demand.
Specs:
Capacity: 600 x 750mL bottles per hour*
Bottle Neck Diameter: 16-34mm
Bottle Height: 7" to 13.75" (180-350mm)
Tank Alcohol Tolerance: 80% ABV
Max Temperature: 176°F (80°C)
Dimensions: 19.6" x 21.6" 16.5" (500 x 550 x 420mm)
Weight: 55.1 lbs
Power: 110V, 60hZ, 125W
*Capacity may change depending on liquid and bottle size.
Adjustable filling height with automatic stop
Stainless steel base, frame, and filling nozzles
Adjustable filling level and filling speed
The Ultrafiller 4 is built entirely in stainless steel with PYREX tank, featuring four high efficiency and precision stainless steel filling nozzles. This professional bottling machine is perfect for wine, uncarbonated beer or cider, spirits, and oils. When you place the bottle under the Ultrafiller 4, the fluid is sucked into the vacuum created inside it, without any contact between the liquid and the pumps or mechanical components.
Why Choose ILTEC
While the Enolmatic has served as a great economical option, the ILTEC offers a significant step up in overall quality and durability. The key differences speak for themselves:
Stainless Steel Construction: Unlike the Enolmatic's plastic components, the ILTEC boasts a robust stainless steel construction, ensuring long-lasting performance and easy sanitation.
Borosilicate Vacuum Chamber: The ILTEC utilizes a borosilicate vacuum chamber, a superior alternative to the plastic chamber found in the Enolmatic. Borosilicate glass is known for its exceptional resistance to thermal shock and chemical corrosion, guaranteeing a cleaner and more efficient filling process.
The ILTEC filler isn't just about superior materials; it's about delivering consistent, precise, and professional results. Whether you're bottling wine, spirits, oils, or other liquids, the ILTEC provides the performance you demand.
Specs:
Capacity: 600 x 750mL bottles per hour*
Bottle Neck Diameter: 16-34mm
Bottle Height: 7" to 13.75" (180-350mm)
Tank Alcohol Tolerance: 80% ABV
Max Temperature: 176°F (80°C)
Dimensions: 19.6" x 21.6" 16.5" (500 x 550 x 420mm)
Weight: 55.1 lbs
Power: Compressed Air
*Capacity may change depending on liquid and bottle size.
Designed for use with Ultrafiller 4 system Supports filter cartridges from 0.45 to 50 micron for precise filtration across various liquids Effectively filters spirits, EVO oil, beer, wine, and more, ensuring clarity and quality The Ultrafiller Three-Cartridge Filter Holder is perfect for those who need to filter their product before bottling and allows you to use cartridges of various micron ratings in a single pass. The 1" intake tube is compatible with Ultrafiller 4 systems. The wide range of combinable filter cartridges allows you to cover all liquids, from the finest spirits to extra virgin olive oil, beer, wine and more. Filter cartridges are available in sizes ranging from 0.45 to 50 micron in polypropylene or stainless steel.
Mignon filling nozzle for the Ultrafiller 2 & 4. With a diameter of only 0.31" (8mm), this nozzle preferred for filling the smallest bottles and well suited for use with oil or spirits.
Mignon filling nozzle for the Ultrafiller 1. With a diameter of only 0.31" (8mm), this nozzle preferred for filling the smallest bottles and well suited for use with oil or spirits.
Mignon filling nozzle for the Ultrafiller 2 & 4. With a diameter of only 0.31" (8mm), this nozzle preferred for filling the smallest bottles and well suited for use with oil or spirits.
Prevents vacuum pump failure when bottling sugary or hot products by effectively filtering impurities.
Comes with pre-assembled tubes and adapters for quick and hassle-free setup; designed for vertical mounting.
Built to withstand prolonged use in dusty environments, with a metal mesh filter element and easy-to-clean components.
When using the Ultrafiller to fill liqueurs, spirits, syrups, or other sugary products—as well as hot products such as juices—it is essential to equip the machine with the oil bath filter. This filter protects the vacuum pump, which could fail over time without proper filtration. Please note that the oil bath filter is not included with the Ultrafiller and must be purchased separately.
Important: Failure to use this filter when bottling the above-mentioned products will void the warranty for the bottling machine.
Mounting Instructions
Before using the filter, fill the cup with food-grade mineral oil up to the indicated level. Medium-density oils are recommended for optimal performance.
Install the filter between the vacuum pump and the recovery tank. The kit includes pre-assembled tubes and hose adapters for your convenience. Always mount the filter vertically:
Connect the OUT port to the pipe leading from the motor.
Connect the IN port to the pipe and quick-release fitting supplied with the tank. (Refer to the detailed instructions for further guidance.)
Maintenance
These filters are designed for prolonged use, even in dusty environments, offering excellent filtration and durability. To maintain optimal performance:
Regularly change the oil, ensuring the level remains at the indicated mark.
Remove impurities that accumulate during operation.
For particularly dusty conditions, disassemble and wash the lower parts of the filter daily.
Materials
Painted sheet metal container
Metal mesh filter element
Operating temperature range: 32°F to 197°F
