Search results for "anvil brew bucket"

Coming soon! The newest Brewing Systems and accessories from Brewtools are now available for pre-order. Place your order now and we will automatically ship it to you when it's available. The current estimated availability is January 2027. Note: The Brewing System does not include a power cable. For the B100 230V, we recommend the NEMA 6-20P power cable (BT1618). See below under You Might Also Need. B100 Brewing System The B100 is a powerful all in one brewing system for serious homebrewers or small breweries. It offers simplicity out of the box, whilst keeping the level expansion possibilities. Indirect heating and included whirlpool setup for maximum yield and fast cooling through the integrated cooling jacket makes cleaning a breeze. The 8" touch display can easily be relocated on the system or externally based on your needs (longer cables are available).  Included whirlpool setup for maximum yield and fast cooling. The included malt pipe has a hinge system to allow tilting the malt pipe to empty spent grains easily. The flow of wort through the FCS Brew Pump is controlled via the patented CleanCore™ 3-Way valve operated from the front.  The combined temperature and level switch sensor keeps you safe by automatically switching off the pump and heating if the water level is low.  With TC side ports, you can easily expand the inputs and outputs of the tank with sparge water, external added cooling with bypass etc. The B100 can be expanded with an external side-by-side mash tun that greatly increases the malt capacity and removes the need for a crane to handle the malt pipe. If you need a powerful and flexible workhorse for high volume homebrewing or a pilot brewery, the B100 or B180 is the perfect match. Indirect heating (10-degree conical bottom) Integrated cooling jacket Included whirlpool setup Included hinged steam hat Tiltable malt pipe Powered by FCS Brewing with an 8" Touch Screen Patented CleanCore™ sanitary 3-way valves 2 side TC ports for expansion Optional external mash tun and counterflow chiller Included temperature sensor for malt pipe Remember to get power cables for your area (purchased separately) We recommend the NEMA 6-20P power cable (BT1618)   Drawings / Schematic for setup Available controller ports: 2 CAN bus ports (+24V) 1 High Power CAN bus port for external mash pump 1 external high-level switch (for external mash tun) 1 mash temp sensor input 1 return temp sensor input (optional) In the box: B100 brewing system with malt pipe and steam hat Malt pipe with laser cut filter 1 CleanCore™ 3-way valve Silicone tubing for draining and recirculation Parts and accessories for assembly Mash sensor (probe with 2m cable) Specifications: Batch size: 5.28 - 26.41 gallons Total volume capacity: 30.90 gallons Grain capacity: 57.3 lbs Heating power: 6000W (230V/400V) Watt density: 25.8W/in² Control system: FCS Brewing with 8" IPS touch screen Connectivity: Wi-Fi 2.4 GHz 802.11ax/b/g/n Pump: Brewtools FCS Brew Pump, 7.9 gal/min, 14.7 ft. head Materials: 304 Stainless steel, food grade silicone, EPDM, POK (Polyketone) Valves, fittings, and connections: TC 1.5" (TC34mm for cooling jacket) System height with steam hat: 37.4" Tank dimensions: Ø19.6", height 23.6" (31.1 gallons) Malt pipe dimensions: Ø16.3", height 22.2" (20.1 gallons) Packing dimensions and weight: 26" x 26" x 39.3" Safety features: Overheat protection, dry-boil protection, liquid detection 5 year manufacturer's warranty Remember: Power cable(s) Connectors for cooling jacket (kit or custom setup) Troll table with crane Steam condenser Models in pictures are prototypes. Changes/improvements may occur. For User Manuals and support, please follow this link to Brewtools Docs.  

Read more less

Perfect for serving your craft creations on the go or making a compact home draft system that fits inside your refrigerator Welded from the inside out using a specialized technique for superior, more sanitary welds compared to similar mini kegs Interlocking chimes for easy and secure stacking of multiple mini kegs KegLand's Small Stainless Steel Mini Beer Kegs are ideal for homebrewing small batches and serving your craft creations directly from your home fridge. These compact kegs are designed for convenience and versatility. Flexible Dispensing and Carbonation You can naturally carbonate your beer using priming sugars or, for a more controlled approach, force carbonate and serve with the Ball Lock Tapping Head. The Tapping Head features a flexible silicone dip tube, allowing you to dispense beer whether the keg is standing upright or lying on its side. The dip tube will sink and draw liquid from the bottom, allowing you to orient the keg whichever way is more convenient in your refrigerator. Superior Quality and Durability KegLand's mini kegs are built to last, undergoing acid bath electrolysis to passivate the stainless steel, making them exceptionally resistant to rust. These are the only mini kegs on the market that are welded from the inside out using a specialized technique. This results in a superior, more sanitary welding finish compared to other mini kegs. When you choose a KegLand mini keg, you're investing in the highest quality available, surpassing the standards of other mini kegs of similar design. Low2 Lid O-Ring The sealing cap features an O-ring made of KegLand's special Low2 material which offers vastly improved oxygen barrier properties compared to silicone or EPDM, resulting in your beverage staying fresher for longer. Expand Your Setup with Accessories Enhance your mini keg experience with a range of available accessories, including neoprene jackets for insulation and compact tapping systems for easy dispensing. Stackable with the 4L Mini Keg. Specs: 2L / 0.52 Gal / 67 fl oz 7.6" High x 5.3" Diameter (195mm x 135mm) Max Working Pressure: 45 PSI / 3 Bar Made from 304 Stainless Steel KegLand Part Number: KL06347  

Read more less

Specially designed for long-lasting use in demanding environments, each round Lavex bin is made of heavy-duty plastic resin. The resin is engineered to take a beating, making it strong and sturdy enough to withstand impact, while resisting cracking. NSF-listed and FDA-approved, the resin also makes each bin food-safe and ideal for bulk food storage.     32 gallon round food grade plastic container. Ideal for primary fermentation of grapes, and general storage.   A 32 gallon bucket will hold around 300 pounds of grapes, enough for about 18 gallons of finished wine.   NSF-listed and FDA-approved, the resin also makes each trash can food-safe and ideal for bulk food storage.   Made in America        

Read more less

Translucent, food-grade tubing temperature rated to 500F. Odorless, tasteless, and inert Silicone tubing is FDA food-grade approved from -100F to 500F. Translucent natural color allows you to see the flow. The perfect tubing for building a personal brewery, especially for any time that the wort in contact with tubing will be above 180F. This tubing is not designed to hold pressures above 20psi. It works great with our magnetic drive pumps such as a March or Chugger pump, but we do not recommend it with a impeller pump or for use with household water pressure. Platinum Cured Quantity ordered will be shipped as multiple pre-cut lengths. Maximum length available is 100 ft. *Will burst at 30 PSI at 70F.  

Read more less

Reliable in just about any style, including Pale Ales, IPAs, Wheats, Saisons, Ambers, and especially hop-forward Hazy IPAs or Hoppy Lagers Aroma Profile: Citrus, Grapefruit, Stone Fruit, Tropical, Woody Alpha Acids: 10.0 – 16.0% T-90 Hop Pellets This wildly popular dual purpose hop has been becoming more and more prevalent in the modern beer scene ever since it was originally released back in 2000 by Yakima Chief Ranches. Simcoe® is now a favorite among craft brewers and homebrewers alike for its versatility and delicious flavors of citrus, pine, and passion fruit character. High alpha acid content allows it to be used as the main bittering base, while its high oil content makes it an impressive aroma addition when added late in the boil, during whirlpool, or as dry hops during or after fermentation. Simcoe® has a smooth bitterness met with aromas of earth, citrus, and cannabis. Use liberally in just about any style, including Pale Ales, IPAs, Wheats, Saisons, Ambers, and especially hop-forward Hazy IPAs or Hoppy Lagers. Hop Statistics: Alpha Acids: 10.0 – 16.0% Beta Acids: 3.0 – 5.5% Cohumulone: (% of alpha acids): 17 – 21% Total Oils in mls per 100 grams dried: 0.5 – 3.0 Similar Hop Varieties: Summit, Magnum, Citra®, Mosaic®     Simcoe®, Citra®, and Mosaic® are registered trademarks owned by Yakima Chief Hops, LLC.

Read more less

A sealed pressure gauge is the most sanitary and safest solution for your needs. Designed to prevent krousen from plugging the gauge, it ensures longer-lasting performance and unparalleled reliability. This 1.5" tri-clamp pressure gauge is included with the BrewBuilt™ Kit for Fermenting Under Pressure but can be used with any stainless steel conical fermenter with 1.5" T.C. ports. Liquid filled gauges offer better performance and longer lifespan compared to dry gauges. Dial face reads in both psi and BAR. Sealed, liquid filled pressure gauge 0-30 psi 0-2.05 BAR 1.5" tri-clamp connection Made from 304 stainless steel  

Read more less

The BrewBuilt tri-clamp thermowell allows you to monitor temperatures with digital thermal probes. Perfect for controlling fermentation temperatures on a stainless steel conical using a digital temperature controller. Or use it with an electric boil kettle or hot liquor tank to send temp readings to a PID controller to control your heating element. 1.5" T.C. 4" probe Compatible with 1/4" Ø temp probes Made from 304 stainless steel

Read more less

Upgrade standard and Plus model X-Series conicals with increased cooling performance Chill down to cold crashing temps when used with glycol and insulation; compatible with any vessel with a 4" T.C. opening Keg Connects and Floating Racking Buoy enable you to pressure transfer the clearest beer at the top of your fermenter 1.5" tri-clamp ferrule for use with additional T.C. accessories like the Pressure Fermentation Kit or Hop Bong Sanitary all stainless steel construction with 3/8" OD inlet/outlet for glycol connection Upgrade your standard model X-series conical with the ultimate in-solution chilling coil—the BrewBuilt Ludicrous Coil! Temperature control is one of the most important aspects of a healthy, happy fermentation. When your fermenting beer gets too hot, the yeast will likely impart off-flavors that can easily overwhelm the taste of your finished beer. The Ludicrous Coil offers a ludicrous amount of surface area (which means more cooling capacity) compared to other chilling coils you'll find. Not only does it manage your fermentation temperature with ease, the Ludicrous Coil has the capacity to chill beer to cold crashing temperatures when used with glycol and insulation. A truly unparalleled unit when it comes to in-solution chilling. You will also need a cold water source to provide the cooling solution. For maintaining ale temperatures, a cooler or bucker of ice water is sufficient in most cases and this method works well with the BrewBuilt Chiller Pump Kit. For maintaining lager temperatures or cold crashing, we recommend the IceMaster Max 2 Glycol Chiller and the Insulated Tubing Set. Sanitary all stainless steel construction with 3/8" OD inlet/outlet. Compatible with 3/8" ID flexible tubing & hose clamps or 9.5mm Duotight adapter. Specifications: Size Coil Height Float Tubing Length 7/14 Gal 18.5" 24" 27 Gal 24" 30" 38 Gal 33" 39"

Read more less

A reliable workhorse for Hazy IPAs, West Coast IPAs, Pale Ales, and Hoppy Lagers Aroma Profile: Berry, Citrus, Stone Fruit, Tropical Alpha Acids: 18.0 – 26.0% Cryo Hop® Hop Pellets Higher AA and nearly twice the resin content of traditional T-90 hop pellets Increase yield by reducing vegetal matter in your brewhouse and fermenter Cryo Hops® provide brewers with the ability to get gigantic hop character while reducing astringent and unpleasant vegetal flavors. With a substantially higher oil and resin content, LupuLN2 powder offers up all the flavor and aroma of a heavily hopped beer, but with a significanly reduced grassy character. Additionally, the lower dosage rate of the concentrated powder reduces the volume of trub and therefore, kettle loss. Using Cryo Hops® you will net more beer that is clearer! Typical usage of Cryo Hops® would be roughly 50% of pellets. LupuLN2 powder can be used in any application where traditional hop products are utilized, including: Bittering, Kettle, Whirlpool and even direct to the fermentor.  It is suggested that you use Cryo Hops® as late additions, in the whirlpool or dry hop, as the volatile aromatic compounds will be driven off if added early in the boil. Cryo Hops® are an innovative hop product that is made by separating the lupulin from the hop flower using cryogenic processing. The result is a product with twice the potency of T90 pellets, with reduced astringency and vegetative material. Note: These hops come pelletized. The powder is compressed into pellet form to make handling easier. Typical Hop Statistics: Alpha Acids: 18.0 – 26.0% Beta Acids: 5.0 – 8.0% Total Oil: 1.5 – 4.5%   Mosaic® is a registered trademark owned by Hop Breeding Company. Cryo Hops® is a registered trademark owned by Yakima Chief Hops, LLC.

Read more less

Amber in color and medium bodied, this beer blends a traditional English malt profile with Willamette hops from the Pacific Northwest and American ale yeast. Yes please! Color/Body: Amber/Medium Bitterness: Medium Estimated Alcohol: 5%

Read more less

Add this neoprene jacket to your Gen 4 BrewZilla to speed up heating! Heating is 10% faster and heat loss from the boiler is reduced by 50% Remove the jacket after the boil to speed up chilling Thick, insulating neoprene is secured to the boiler body with a sewn-on hook and loop fastener strap Sparge arm sleeve included to reduce heat loss during mash recirculation Add some insulation to your BrewZilla to get better boils! This neoprene jacket will help keep the heat in for quicker and more vigorous boils. Slap it on to speed up heating; take it off to speed up chilling. Also includes a neoprene sleeve for the recirculation arm to reduce heat loss during the mash. This jacket will fit Gen 4 BrewZilla models. It is not compatible with older generations of BrewZillas and DigiBoils due to where the cutouts on the jacket are located. Features: 10% faster heat up time 50% less heat loss from boiler Fits the 35L BrewZilla Gen 4 Made from 8 mm thick neoprene which is easy to wash after use KegLand Part Number: KL24365  

Read more less

Golden Light is an excellent choice as a base or to boost gravity. Slightly darker and richer in biscuity/bready flavors than Pilsen extract DME can be used as 100% of your fermentable sugar in extract brewing Add for color correction, boost gravity, or improve head retention in all grain brewing Briess Malt & Ingredients has had a focus on quality and innovation for more than 140 years, with all of their products being made in the U.S.A. Dried Malt Extract (DME) is the primary sugar source in extract brewing and can be used in partial-mash or all grain brewing to adjust flavor, color and gravity of brews.  DME can also be used to increase head retention and body. Many brewers choose nutrient rich DME as the sugar source for making yeast starters as well. Briess dried malt extracts are made from 100% malt and water. Golden Light DME: 100% pure malt extract made from 99% base malt,1% Carapils® Malt, and water. Golden Light is an excellent light malt extract . With a malty flavor, it can be used in the production of any beer style, either as a base or to boost gravity. Slightly darker and richer in biscuity/bready flavors than Pilsen extract. Preferred in the production of most ales. Typical Analysis: Color (8° Plato): 4.0 SRM Fermentability: 75% Solids: 97% 1.043 PPG

Read more less

Unitank Light offers the same tank body as the standard Brewtools Unitank with a slight difference in included accessories for a more affordable price Ferment, cold crash, and carbonate beer all in one vessel with the Brewtools F-Series Unitank Cooling jacket welded to the vertical walls of the tank provide superior cooling capabilities compared to in-solution cooling coils Made from stainless steel throughout with Brewtools' proprietary PureBlast™ surface—no passivation required, simply rinse with warm water before your first use Pressure rated to 30 PSI so you can safely ferment under pressure and pressure transfer finished beer to kegs with virtually no oxygen pickup Brewtools is a Norwegian brand known for high-quality products made without compromise. From brewing systems to fermenters, they continue to push the envelope of innovation for homebrewers around the globe All valves, fittings, and gaskets come included Unitank Light is the same tank body as the standard Brewtools Unitank, but with slightly less equipment and some parts made from Polyketone (POK), which vastly reduces cost without compromising the user experience for smaller tanks. Unitank Light can be upgraded to a standard Unitank where you prefer. Key Differences: CleanCore butterfly valves made from Polyketone Barbed blow-off PRV Can be set to open during fermentation for blow-off Also acts as 2 bar / 30 psi safety valve Pushfit sample valve Compatible with optional Push-fit Coil and Adapter Polyketone 8” to 3” tri-clamp lid adapter replaces stainless steel adapter Polyketone racking arm replaces stainless steel racking arm Does not include neoprene insulation jacket, ss blow-off tube or ss blow-off valve Brewtools Unitanks are fermenters made for ambitious homebrewers and small breweries. As part of the Brewtools identity, they've explored new techniques and solutions. This has resulted in a series of high-end fermentation tanks with new features and a lot of possibilities. Key Features: Brewtools PureBlast™ surface inside and out which eliminate the use of wax and polishing compounds and does not require passivation Cooling jacket in the vertical walls offers efficient cooling without the hassle of cleaning a coil Many options for connecting accessories like sensors, heaters, carb. stones and other accessories Conical pressure rated for 2 bar / 30 PSI Cooling jacket pressure rated for 0.5 bar / 7 PSI 8" TC port on top for easy access 2" TC dump and racking valves Brewtools Unitanks are designed and manufactured with special attention to safety and quality. They are tested and certified according to the requirements for PED 2014/68/EU by a third party. Specifications: Low height w/o acc.: 32.6" Max height w/o acc.: 40.5" Packaging size: 33.4" (h) x 20.5" (w) x 20.5" (d) Net weight: 73 lbs Gross weight: 88 lbs Tank diameter (inside): Ø15.75" Gross volume: 13.5 gal Max rec. volume: 10.5 gal Min rec. volume: 5.3 gal Volume, cone: 3.1 gal Material: 1.5mm stainless steel (SS304) Operating pressure: 1.0 bar / 15 PSI Max pressure: 2.0 bar / 30 PSI Min. pH: 4.0 In the box: Unitank with adjustable frame 1 pcs Analog pressure gauge, TC34mm 2 pcs CleanCore Butterfly-valve, 2" 1 pcs Racking arm 2", POK 1 pcs TC elbow 90°, 2" 1 pcs Sample valve, 34mm, POK 1 pcs TC Adapter 8"-3", POK 1 pcs TC blind cap, 3" 1 pcs TC blind cap 2" 2 pcs TC blind cap 1.5" 4 pcs TC blind cap 34mm 2 pcs TC gasket 8" lipped 2 pcs TC gasket 3" 2 pcs TC gasket 2" 5-pack 1 pcs TC gasket 1.5" 5-pack 3 pcs TC gasket 34mm 5-pack (DN20) 1 pcs Tri Clamp 8" 1 pcs Tri Clamp 3" 5 pcs Tri Clamp 2" 2 pcs Tri Clamp 1.5" 9 pcs Tri Clamp 34mm 1 pcs TC tool 4 pcs M10 steel/rubber feet 1 pcs TC34mm pull-type PRV/Safety valve with 7mm barb 1.5m (4.9') Silicone tube 6x10mm Necessary bolts and parts for assembly 5 year manufacturer's warranty Recommended accessories include: HopDrop-kit, Thermowells for your sensors, 34mm Ball-Lock gas adapter for CO2 filling, Carb. stone kit with Ball-Lock, Coil for sample valve, Spunding valve, Hose barbs for filling and dumping, 2" sight glass etc. For User Manuals and support, please follow this link to Brewtools Docs. NOTE: Model in photo is a prototype. Minor changes and improvements may occur.

Read more less

Imported grape picking bucket from Italy with a sturdy handle.  Is more maneuverable than a 5 gallon bucket when trying to get in and around grapevines and is also much easier to carry. They do a lot of handpicking in Italy... they have it figured out! *Basket color may vary

Read more less

The Anvil Brewing Pump Replacement Head is crafted from durable stainless steel with a 1/2" NPT connection.  Perfect for restoring performance, this pump head ensures reliability and compatibility with your Anvil Brewing Pump, not the Anvil Brewing Pump-XP. Note: This listing is for the pump head only; the pump is sold separately.  

Read more less

This heavy-duty, 24″ stainless steel tube replacement works with the O2 Wand to help brewers oxygenate their wort effectively, promoting optimal yeast health and fermentation.  

Read more less

A best seller for a reason! Tons of features at an incredible cost Crystal Clear super smooth PET makes fermenting and cleaning super easy 3" Butterfly valve at bottom makes removing yeast/trub easy with the 600mL collection jar. Pressurizable for fermentation and closed transfer to your keg Includes BlowTie spunding valve kit, red & yellow carbonation caps, and floating dip tube as standard The FermZilla is the perfect option for brewers that want all the advantages of a conical fermenter without the price tag of a full-blown stainless-steel unit. It allows you to dump trub, harvest yeast, and with the addition of CO2 cylinder and regulator, you can carbonate and serve – all in one vessel! The clear PET tank allows you to visually monitor fermentation activity and is pressure rated to 2.4 Bar (34.8 psi), which means you can ferment under pressure, reducing ester and fusel alcohols in your finished beer. This also gives the ability to perform pressure transfers. If you prefer to move your finished beer to a keg or other vessel, you can do so with little to no oxygen exposure. The FermZilla Tri-Conical Easy-Grip model comes packed with accessories so you can take full advantage of this pressurizable fermenter on day one. The new stock standard includes Easy-Grip threaded lid ring, BlowTie spunding valve with integrated pressure gauge, ball lock carbonation caps for the lid, floating dip tube kit with weighted filter, volume marker graduation sticker, and adhesive thermometer.  What's Included: FermZilla 55L Tank with 3" T.C. Bottom Port Easy-Grip Threaded Lid Ring Integrated Gauge BlowTie Kit Spunding Valve (0-15 psi) Silicone Dip Tube Kit with Yellow Weighted Filter and SS Float (1) Yellow Liquid Carbonation Cap (1) Red Gas Carbonation Cap Fermzilla Pressure Lid with Red PRV (35 psi) 3" T.C. Butterfly Valve 600 mL Collection Container with 3" T.C. Connection Stainless Steel Stand with Swing Handles 3" tri-clamp with gasket Graduation Sticker Adhesive Thermometer Specs: 55 L (13.2 gal) Total Volume Pressure Rated to 2.4 Bar (34.8 psi) Height in Stand - 41.5" Tank Diameter - 13.9" Diameter in Stand - 15.3" Lid & Collection Container Ports - 28 mm PCO 1881 threads Temperature Rating: When not under pressure, do not expose to liquids above 131°F When under pressure, do not expose to any temperatures above 95°F* *Please note that the temperature rating for the FermZilla tank is lower when using it under pressure. When not under pressure, it is perfectly safe to transfer wort into the tank below 131°F or to use hot liquids below this temp for cleaning. When under pressure, make sure to keep your fermentation temperature below 95°F and keep the fermenter in an environment that is below 95°F ambient. This is especially important when fermenting with kveik yeast. These strains are known to ferment hot if no temperature control is being used. Exceeding the temperature rating may compromise the tank, leading to a shorter life span or sudden failure to maintain pressure. Even with proper use, we recommend replacing the tank every two years. Please note: when using the FermZilla under pressure, you must perform a water pressure check to ensure your connections are leak proof. To do this, fill your FermZilla up with water, apply at least 15 psi pressure, and check for leaks around all caps and threads.   Pressure Stress If you use the FermZilla to ferment under pressure, or you use CO2 to pressure transfer or force carbonate your finished beer, it is very important that you conduct semi-annual inspections of your tank. Even with perfect care, the FermZilla tank may show signs of wear from pressure stress over time. We recommend visually inspecting your tank for stress creases or other signs of wear once or twice a year. A hydro test should be conducted every two years, even if no signs of wear are found. The process is simple: Fill the tank to the brim with water Replace the Red PRV with a Green PRV rated to 4.5 BAR or higher Pressurize the tank to 4 BAR (58 psi) Check for leaks, then replace the Red PRV when finished If leaks or potential points of failure are found, replace the tank before you continue using pressure with your FermZilla. General Care Taking good care of your FermZilla begins with cleaning and sanitizing the unit before and after use. The tank is made from food-grade PET, which is beautifully clear, but can be sensitive to long soaks in cleaners and acid-based sanitizers. In general, we do not recommend leaving products like PBW or StarSan soaking in the tank for more than an hour. Extended soaks have the potential to degrade the PET material and shorten the lifespan of the tank.   KegLand Part number: KL47302 NOTE: FermZilla tanks are marked with a manufacturer’s “expiry date”. This does not indicate that the tank is bad after this date; it simply indicates that a hydro test may be in order. 2 years after production and every 2 years after first use, it is recommended that the tank be hydro tested to ensure the tank is holding pressure. You will also need the D1072 Green PRV to perform the test. If you do not plan to pressurize the fermenter, the test is not necessary. FermZilla Tri-Conical 27L & 55L | User Guide

Read more less

This replacement part for the Anvil Brewing Pump includes the Pump Head and O-ring, Impeller, and Impeller Washer.

Read more less

Amarillo® hops enjoy a special place of adoration in the hearts of brewers. Often described as a supercharged version of Cascade. Bursting with floral, tropical, and citrus (lemon, orange and grapefruit) characteristics, but it has a distinctive Orange character to it that is very different from Cascade. An excellent choice of super hoppy beer styles like Hazy IPA or West Coast IPA, Pale Ales, or Hoppy Lagers. But really, it's an excellent addition to any beer where you want citrus flavors to pop. Hop Statistics Alpha Acids: 8.0 – 11.0% Beta Acids: 6.0 – 7.0% Alpha-Beta Ratio: 1.1 – 1.8 Cohumulone: (% of alpha acids): 21 – 24% Total Oils in mls per 100 grams dried: 1.5 – 1.9 Similar Hop Varieties: Cascade, Centennial, Simcoe®     Amarillo® is a trademark owned by Virgil Gamache Farms, Inc. Simcoe® is a registered trademark owned by Yakima Chief Hops, LLC.  

Read more less

Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory.   With the MoreBeer! Jockey Box your beer will pour cold for hours! Take it camping, tailgating, or just pull it out when the gang is over. A Jockey box (or draft box) is a portable dispensing system used to cool beer as it travels inline from the keg to the faucet. The MoreBeer! Jockey Box includes an insulated cooler, two 50' x 3/8" stainless steel coils, shanks and beer line clamps. Our jockey box does not include faucets or tap handles as standard, allowing you to pair it with the faucet model of your choice. Select your desired faucets from our add-on system above. A favorite innovation in our draft box design is that we use larger 3/8" OD stainless steel tubing, which has two advantages over designs offered by other companies: It cools a greater volume of beer, and cools it faster. The coil will hold approximately 33 oz of beer at a time. The larger diameter line offers less resistance, which lets you push the beer with less CO2 pressure. Our boxes require about 10-15 psi from the CO2 tank to push the beer from the keg to the faucet (same pressure you use to dispense at home). Because the vast majority of beer lovers opt to keep their beer cool at all times to protect flavor (especially a homebrewer who is going to retap the same kegs at home!) and reduce foaming issues, most people opt to also ice the keg. The low applied pressure of 10-15 psi means that if you leave the system hooked up overnight, the beer will not over carbonate. If you do not plan on keeping the keg cold, which is perfectly fine, our system still works great because you can disconnect the line (if left for days) to keep the beer from losing carbonation. We do not use shanks on the back side of our boxes. We drill holes slightly smaller than the line size so that a tight seal is created but you can still pull the line in when not in use, without having a wrench on hand. This makes storage and transport extremely easy. You will appreciate not having lines flopping everywhere.  You will need to purchase the appropriate keg coupers for your commercial kegs or quick disconnects for your homebrew kegs. You will also need a CO2 system, comprised of a CO2 tank and regulator. Tips For Best Results: It is much more likely for a beer left at a high psi to overcarbonate (become foamy) than a beer left at a low psi to lose carbonation. The reason is that gas will always keep coming from the regulator until the gas/beer pressure have reached an equilibrium, so over time the high psi setting becomes the pressure in the beer. However, for a beer to lose carbonation it has to come out of solution into the headspace in the keg. Because the headspace is limited, only so much CO2 can come out, and the keg pressure will not drop all the way down to the lower regulator pressure on its own. This is the reason that if you have overcarbonated a beer you have to repeatedly vent the keg, reducing the pressure in the headspace to 0, and allowing more gas to escape from the beer. For the best performance when using a draft box, tests have shown that ice water is actually the most effective at cooling the coils. So, as the ice melts, do not open the drain valve on the cooler. Draft boxes with Cooling Plates (stainless coil embedded in aluminum) are designed to work with the valve open, ours is not.  

Read more less

The Pump Mount is a dedicated, versatile bracket for your Modular Utility Cabinet system, engineered to securely hold and position your brewing pump right where you need it—keeping plumbing tidy, reducing vibration, and optimizing flow height for gravity-assisted or recirculating setups. This stainless steel mount uses a clever, quick-release hook-and-bracket design that makes installation and removal effortless. Specifications: Universal compatibility — Features a flexible bolt pattern designed to fit popular homebrewing pumps, including the Blichmann Riptide™, Anvil Brewing Pump XP, and many others from major manufacturers (e.g., March, Chugger, and similar models with standard mounting footprints). Quick-hook mounting system — The mount consists of two parts: a sturdy bracket that bolts permanently (but removably) to the cabinet side or interior using included hardware, and a separate pump attachment plate that fastens directly to your pump. Simply hook the pump plate onto the cabinet bracket—secure, stable, and super easy to attach or remove in seconds without tools. Convenient removability — Pop the pump off the bracket anytime for cleaning, storage, or swapping to another setup—no unbolting or hassle. Re-hook it just as quickly when you’re ready to brew again. Stainless steel construction — Made from durable 304 stainless to match your cabinet’s premium aesthetic; corrosion-resistant, easy to clean, and built for long-term outdoor or brew-shed use. Secure & stable positioning — Reduces pump movement/vibration during operation, minimizes hose strain, and allows adjustable height/orientation for optimal wort transfer, recirculation, or chilling. Bolt-on cabinet integration — Cabinet-side bracket attaches quickly to pre-drilled points—no drilling required. Pump-side plate uses standard bolt holes on most pumps. Whether you’re running a Riptide for high-flow recirculating mashes, an Anvil XP for reliable all-in-one system support, or another compatible pump, this mount integrates seamlessly to elevate your brewing efficiency while making pump handling incredibly convenient. Note: Pump not included. Compatible with most homebrewing pumps using standard bolt patterns—confirm your pump’s mounting holes align with universal patterns.  

Read more less

Insulation Jacket for MiniUni™ "plus" model fermenter. Reduces condensation on the tank during big differences in temperature Made from 5mm neoprene.

Read more less

This 1 Gallon Starter Kit is the the easiest way to get started homebrewing! Our Homebrew Starter Kit leverages your existing 2 gallon pot to make 1 gallon (about ten 12 oz bottles) of craft beer right in your kitchen in just a few hours! Our thoughtfully crafted Ingredient Refill Kits include everything you need for your batch, from grain bag to bottle caps. Unlike some other manufacturers there are no costly add-on packages needed to complete the brewing process. Our recipes span a wide range of classic and modern beer styles, you’re not limited to only very bland or very esoteric recipe choices. One thing they do share, though, is our decades of experience in brewing and crafting world-class beers; experience we’re now sharing directly with you! If you’ve ever thought about brewing your own beer at home, there’s no reason to hesitate any further. This is the starter kit you’ve been waiting for. Equipment Kit Contents Wide Mouth, Easy-To-Clean 1 Gallon Fermenter Jar Fermenter Jar Lid w/ 3-Piece Airlock Mini Auto-Siphon makes transfers a breeze Food-Grade Transfer Tubing Premium Bottle Filling Wand Bottle Capper Sanitizer Concentrate Irish Red Ale Recipe Kit (see below for more info) Irish Red Ale Medium bodied, beautiful red color, and toasty, graham cracker malt character. Where Helen’s was the face that launched 1,000 ships, this is the beer that’s launched thousands of homebrewing careers. One of our all time best-selling recipes--one sip and you’ll understand why! Color/Body: Red/Medium Bitterness: Medium Estimated Alcohol: 4.5% Plus, EVERY Brewmaster Beer Ingredient Refill Kit comes complete with everything you need for your next batch of beer, including: Specialty Steeping Grains Fermentable Malt Extract Brewer’s Hops Brewer’s Yeast Disposable Grain Bag (for recipes w/ steeping grains only) Carbonation Drops Bottle Caps *Note: You will need to save up or purchase 10-12 12oz PRY-OFF (not twist-off) beer bottles.

Read more less

Premium, Fire-Toasted Oak Cubes from Stavin Medium + Toast American Oak will impart flavors of campfire, vanilla, roasted coffee and butterscotch. These fire-toasted oak cubes are as close as you can come to the full range of flavors you would get from aging your beer in a full sized barrel, unlike convection-toased cubes. The difference is that convection toasted cubes are made by cutting the stave to size, then passing the small cubes through a toasting chamber. Stavin fire-toasts their staves whole, just like they would when making a barrel, and then cuts them down to size. The result is a gradation of toasting from the surface through to the center of the cube, where each different toast level represents a different flavor set that the oak will give your beer. The result is a much more complex and natural profile; by comparison convection toasted cubes taste one dimensional. Oak cubes also release their flavor into your beer more slowly than chips, giving you more control over the final degree of impact in your beer. You should plan on an extended aging period of 1-6 months when using cubes. This longer contact time again promotes flavor complexity by allowing all the flavors of the oak and your beer to marry. Recommended Dosage is 2 oz per 5 gallons for impact equivalent to aging in a brand new oak barrel. Download the PDF

Read more less

The insulation jacket reduces heat loss during brewing. Recommended for use outdoor or in colder environments. For B150pro brewing system.

Read more less

Advanced Modular Control System: Designed for homebrewers and microbreweries, the Brewtools FCS brings industrial-level precision with features like temperature, pressure, and gravity monitoring for ultimate brewing control. Comprehensive Starter Kit: Includes essential components such as FCS Display and I/O Modules, temperature and pressure sensors, and all necessary cables and adapters to start customizing your fluid control setup. Automated Fermentation Profiles: Automate cooling, heating, and pressure management with software-driven profiles, simplifying complex processes while ensuring consistency in your brews. Expandable & Customizable: Add solenoids, pumps, airlocks, and adapters to fit your specific brewing needs, compatible with both Brewtools and non-Brewtools tanks. Constant Monitoring & Alerts: Early warning notifications for equipment issues like solenoid valves or heating elements ensure smooth operation and protect your brewing investment. An upgraded version of the FCS Starter Kit w/ Density Sensor is also available. FCS is a modular control system designed, developed and manufactured by Brewtools in Norway. The vision behind the system is to take industrial technology and make that available for microbreweries and homebrewers. Using the latest electronic component technology and clever software engineering, Brewtools is able to make features that used to be very expensive and complicated available for everyone. The system can measure temperature, pressure, density/gravity*, level* and power consumption and based on that — control cooling, heating, pressure/CO2 in, pressure/CO2 out, agitation*, automatic hop additions* under pressure and more! Fermentation profiles will automate the whole process and give you ultimate control of your fermentation process. (*Not available at first launch.) The system will also constantly monitor the process and notify you if something isn't right. For example, the system will measure the current draw of solenoid valves and heating elements, and will notify you if these components aren't working as they should. Please Note: The software is currently in a state of early adopter beta, and should not be used for critical production. Brewtools will continue to develop software and new sensors/actuators based on customer feedback and requests. If you cannot find a sensor or actuator that fits your setup, please reach out to us and let us know. Note that we do not take responsibility for any lost/destroyed beer or raw materials. Brewtools FCS Starter Kit The Brewtools FCS Starter Kit includes all the essential parts to get you started setting up your own custom-designed Fluid Control System. FCS Display Module and FCS I/O Module with power supply 1 temperature sensor (TC 1.5" 160mm) 1 pressure sensor with gas out solenoid All cables and adapters needed (3m length) The kit does not include a valve/pump for cooling as these are tank dependent, and you may already have a solenoid for your existing glycol loop. For non-Brewtools tanks, you also may need an adapter and/or tee to connect the spunding valve/pressure sensor assembly. Accessories To complete your FCS kit setup, some accessories are needed. A solenoid for cooling (Ø4.5mm - 34mm or 1.5") with 2-pin LP12 cable and DIN43650 Type A adapter or a submersible pump (comes with cable). A ball clamp and a connecting rod. An airlock for the pressure out solenoid valve is recommended. For smaller tanks we recommend our polycarbonate airlock. For larger tanks (300l+) you should use a TC34mm to 12mm barb and a 10x16mm silicone tube or equivalent. Tri-Clamps and gaskets. Based on your tank and setup, you may need some extra tri-clamps or gaskets. For MiniUni+, you need to replace the Mini Spunding valve with an M24 to Tri Clamp adapter and a 90 degree TC34mm elbow to fit your spunding assembly (if you want to use our TC air lock. No need for elbow if you use tubing as airlock). Rembember clamps/gaskets. If you don't have a Brewtools Unitank, we recommend getting TC 1.5" to 34mm adapter for the spunding setup. You will also need a 34mm Tri-Clamp and 34mm gasket. Tees and crosses are also available in multiple sizes to give you more ports. Starter Kit Included Parts: FCS Display Module, 5" FCS I/O Module 2x RTD, 5x CAN, 4x Relay Power Supply, 24V 40W, LP12-pin Pressure Sensor, CAN BUS 24V, M12 Solenoid valve, TC34mm + M12, DC24V Ø2.0 Temp Sensor, PT100, TC 1.5", 160mm Cable, LP12 6-pin, 3m Cable, LP12 5-pin, 3m Cable, LP12 3-pin, 3m Cable, LP12-pin, 3m Adapter, LP12-pin to DIN 43650 Type B Recommended Separate Parts: Solenoid valve for cooling with adapters/cables or submersible pump Ball Mount connector and pipe clamp etc. Airlock (Top mounted or barb with silicone tube) Adapters and fittings to fit your tank Brewtools Product Number: 7713567

Read more less

Crystal Clear super smooth PET makes fermenting and cleaning super easy Pressurizable for fermentation and closed transfer to your keg Includes BlowTie spunding valve kit, red & yellow carbonation caps, and floating dip tube as standard The FermZilla 30L All Rounder is the perfect fermentation vessel that can be used for fermenting under pressure, carbonating, and dispensing.  It's far more capable than the FermZilla Flat Bottom but less complicated and less expensive than the FermZilla Tri-Conical fermenter. The key differences are that the All Rounder can be pressurized, unlike the Flat Bottom, but it does not have a dump valve like the FermZilla Tri-Conical. The FermZilla All Rounder Easy-Grip model comes packed with accessories so you can take full advantage of this pressurizable fermenter on day one. The new stock standard includes Easy-Grip threaded lid ring, BlowTie spunding valve with integrated pressure gauge, ball lock carbonation caps for the lid, and floating dip tube kit with weighted filter.  What's Included: FermZilla 30L All Rounder Fermenter Hex Base with 24 x Sticky Dots (pre-attached) Easy-Grip Threaded Lid Ring Integrated Gauge BlowTie Kit Spunding Valve (0-15 psi) Silicone Dip Tube Kit with Yellow Weighted Filter and SS Float Red & Yellow Carbonation Caps Adhesive Thermometer Graduation Sticker Specs: 30 L (7.9 gal) Total Volume Pressure Rated to 2.5 Bar (36.2 psi) Height in Stand - 23" Tank Diameter - 14"  Lid - 28 mm PCO 1881 threads Temperature Rating: When not under pressure, do not expose to liquids above 131°F When under pressure, do not expose to any temperatures above 95°F* *Please note that the temperature rating for the FermZilla tank is lower when using it under pressure. When not under pressure, it is perfectly safe to transfer wort into the tank below 131°F or to use hot liquids below this temp for cleaning. When under pressure, make sure to keep your fermentation temperature below 95°F and keep the fermenter in an environment that is below 95°F ambient. This is especially important when fermenting with kveik yeast. These strains are known to ferment hot if no temperature control is being used. Exceeding the temperature rating may compromise the tank, leading to a shorter life span or sudden failure to maintain pressure. Even with proper use, we recommend replacing the tank every two years. Kegland Part number: KL47272 NOTE: FermZilla tanks are marked with a manufacturer’s “expiry date”. This does not indicate that the tank is bad after this date; it simply indicates that a hydro test may be in order. 2 years after production and every 2 years after first use, it is recommended that the tank be hydro tested to ensure the tank is holding pressure. Hydro test instructions are available below. You will also need the D1072 Green PRV to perform the test. If you do not plan to pressurize the fermenter, the test is not necessary. FermZilla All Rounder 30L & 60L | User Guide

Read more less

Ensure precision and reliability with the Foundry™ Replacement TRIAC (18 Gallon), this high-performance solid-state relay controls the enclosed heating element and fan. Built for durability and efficiency, it provides optimal temperature management for the 18-gallon size Foundry™ Brewing System.  

Read more less

Flash Brewing® Kits from MoreBeer!® require only 10 minutes to brew. Just mix and ferment. Mosaic ® and Citra ® combine their complementary hop flavor profiles for a crowd-pleasing, easy-drinking Pale Ale Flavored with Mosaic ® & Citra ® Cryo Hops® Estimated ABV: 5.8% Estimated IBUs: 30 Makes 2 gallons of finished beer Best Buds Pale Ale Flash Brewing® KitMosaic ® and Citra ® are fantastic hops on their own, but together they create an even more impressive combination. This iconic duo is known for their complementary aroma compounds, making them arguably the most famous hop pairing ever. The tropical hop flavors are enhanced by a light malt profile and smooth bitterness, resulting in a crowd-pleasing, easy-drinking Pale Ale that you’ll always want on tap for your best buds. Flash Brewing® KitsIntroducing MoreBeer!'s Flash Brewing® Kits! Designed for both novice and seasoned homebrewers, these innovative recipe kits allow you to simply mix the ingredients with water and add yeast for fermentation. This streamlined process not only saves you valuable time but also simplifies brewing without sacrificing flavor. Say hello to a faster, easier way to craft exceptional beer at home. Typically, brewing requires you to boil your malt and hops for one hour, followed by another hour for cooling. Flash Brewing® eliminates the need to boil. Our Flash Brewing® malt recipes have been boiled and whirlpooled before they are dried. We then use a HopBite™ shot for bitterness combined with a mix of traditional hop pellets for flavor. Flash Yeast™ starts quickly and consistently produces clean beer that lets the malt and hops shine. The result is a high-quality beer that will absolutely surprise you. If you want to read more about the development of Flash Brewing® at MoreBeer! or have more questions please read our Frequently Asked Questions. Equipment Required for Flash Brewing®Flash Brews can be fermented in any wide mouth 3-gallon fermenter you already own. We suggest a wide mouth fermenter so you can easily pour in the ingredients. The 3-gallon Fermonster fermenter is a perfect choice. If you are new to brewing and need a fermentation kit, See related product. Includes: Best Buds Pale Ale Flash Malt™: 2.5 lbs Mosaic® Cryo Hops®: 0.5 oz Citra® Cryo Hops®: 0.5 oz HopBite™: 30 IBU Shot Flash Yeast™ Flash Brewing® Instructions Flash Brewing® recipe kits do not include priming sugar. For bottling, we recommend PopTops™ Swing Top Bottles and Pop Shots Carbonation Tablets. Citra® and Mosaic® are registered trademarks owned by Hop Breeding Company. Cryo Hops® is a registered trademark owned by Yakima Chief Hops, LLC.  

Read more less

Our single-hop Hazy IPA series dedicated to expressing the newest hops when they hit the scene Includes 100% Nectaron® hops from boil, to whirlpool, to dry hopping Nectaron® Flavor/Aroma: Grapefruit, peach, pineapple Estimated ABV: 6.7% Estimated IBUs: 32 Makes 5 gallons of finished beer Heavenly Haze is our series of single-hop Hazy IPAs. Whenever a hip new hop hits the scene, we're as excited to brew with it as you are! We developed Heavenly Haze to use a straight-forward hazy IPA malt bill as a base that's shared between all Heavenly Haze recipe kits—the only thing that changes is your hop of choice! This allows you to really zero in on the different flavors and aromas of one particular hop, and it's how we recommend experiencing a new hop you haven't brewed with before. We'll continue to expand our Heavenly Haze series to include newly released hops that are perfect for NEIPAs, as well as circle back to include some of our favorite hazy hops that have long been available. Nectaron® is a dual purpose hop with intense notes of grapefruit, peach, and pineapple. Well suited for all hop forward styles including IPAs, New England IPAs, and Hazy Pale Ales. A triploid aroma type, developed in collaboration with New Zealand’s Plant & Food Research. Nectaron® Brand HORT4337 is a full sister to Waimea. Makes 5 gallons Estimated Original Gravity: 1.061-66 SRM (Color Range): 4-5 IBUs: 32 Estimated Alcohol Percentage: 6.7% Liquid Malt Extract (LME) vs. Dried Malt Extract (DME) MoreBeer! recipe kits are offered in both Liquid Malt Extract and Dry Malt Extract so that our customers can choose the format that best suits their needs and brewing style. LME is a viscous liquid, similar in consistency to maple syrup. In addition to being the more affordable option, many brewers find LME easier to handle than dry extract. DME is more condensed and comes in a powder format that is similar to baking flour. Although it’s a little more costly, DME is naturally lighter in color and stays fresher for longer. We highly recommend DME when brewing light colored beers. Nectaron® is a trademark owned by New Zealand Hops Limited Company

Read more less

The perfect pump for use after fermentation! Self-priming and easy to use for transfers between carboys or kegs Included pre-filter removes solids from your liquid and features a quick disconnect design to easily remove the filter for cleaning Adjustable flow rate from 0 to 3 gallons for gentle transfers and slowly pushing finished beer through plate filters Diaphragm pumps are gentle on the liquid passing through them with much less turbulence and aeration compared to magnetic drive pumps The Vintage Shop has been a pioneer in the manufacturing of products for the home wine and beer industry since 1969 Includes tubing and clamps—ready to use out of the box! Why This is a Great Pump: Self-Priming Heat Tolerant materials to 212°F when used with Silicone tubing Speed Control! Gentle Diaphragm Design Self Priming: This pump is capable of pumping gasses, meaning that pumping does not require priming! This makes transfers between carboys or kegs incredibly easy. Simply put both inlet and outlet hoses in a bucket of sanitizer and run the pump for a minute. You're then good to transfer your beer with your sanitized pump! Removable Pre-Filter: This is something which is almost always necessary on diaphragm pumps, as the diaphragm itself is very delicate, and can be ruined by small solids. The pre-filter included on this pump will work to keep solids out of the pump, extending the working life of the unit. And the filter can be removed between uses for cleaning. Heat Tolerant: All materials used in the construction of the pump tolerate temperatures up to 212°F when used with heat tolerant tubing such as silicone.  Because the pump comes with vinyl tubing you would need to replace that tubing with silicone.  Speed Control: Perhaps the most unique feature is a dial control to adjust flow from 0 to 3 gallons per minute. Use it to send your wort from the kettle to the fermenter, or even after fermentation to send beer through a plate filter (such as our FIL45). Gentle on your Beer: A diaphragm pump works by moving beer through one pulsating diaphragm into the next. It is a design that is very gentle on the liquid being pumped. When this pump was first introduced to us, we loved the idea, but had concerns that the speed control would compromise the longevity of the motor. We've built much larger pumps and normally you need a $700 frequency drive to control motor speed. However, we've been selling this pump since the mid-2000s and it continues to perform well and receive excellent customer feedback. This pump comes with 1/2" barbed ports for easy connectivity Comes with 4' tubing on both sides Heat Tolerant materials to 212°F (when used with silicone tubing) 110 Volts, 0.5 Amp, 60 Hz.

Read more less

With your own Nitrogen tank, you can add Nitro-Draft capability to your Home Dispense System! Serve beer on Nitro! The best way to pour your favorite stouts and porters! Made from high-quality aluminum that will never rust like steel tanks Fill with Beer Gas Mix to get that alluring, cascading pour famously associated with Guinness CGA580 valve pairs with standard US-style nitrogen & argon gas regulators KOMOS® offers a full suite of first-rate draft products and draft fittings—from kegs to faucets and everything in between! Use pure nitrogen to serve still wine, cold brew coffee, Sangria and premixed cocktails on draft Brand new aluminum 22 cubic feet Nitrogen tank made from high strength aluminum alloy and high quality CGA580 valves. Because it is made of aluminum rather than steel you can feel confident that it won’t rust. It can be filled with compressed (liquified) Nitrogen, Argon, or Beer Gas Mix (70% Nitro/30% CO2). Fill with beer gas mix (70% Nitrogen/30% CO2) for dispensing beers "On Nitro". Using 100% Nitrogen is also the recommended gas for dispensing cold brew coffee, wine, or even Sangria and premixed cocktails on draft! Aluminum tanks are superior to steel because they do not rust. All tanks are shipped empty. To have tanks filled you will want to visit your local welding supply shop. Because you are purchasing a new tank you can choose to either have it filled or to exchange it for a filled tank at your local gas supplier. If you have this tank filled the local gas supplier is responsible for affixing the correct neck label that identifies the gas being put in the cylinder. Tanks should always be stored in an upright position. Features: Made from corrosion resistant, engineered Aluminum Brushed finish Thick, durable cylinder walls DOT approved New high quality CGA-580 valve Light weight compared to steel tanks Rated to 2216 PSI service / 3360 PSI test pressure PSI (allowing for Nitrogen fill) Can also be filled with Argon or Beer Gas Mix (Nitrogen/CO2) NOTE: You will need at Nitrogen/Argon Regulator to go with this tank, a standard CO2 regulator will not work.

Read more less