Search results for "anvil brew bucket"

Includes all the equipment required to whip up Flash Brewing® Beer Making Kits plus the first recipe kit of your choice! Flash Brewing® Kits from MoreBeer!® require only 10 minutes to brew. Just mix and ferment. Malt extract, hops, and yeast are included with each recipe. Simply mix with water in the fermenter and you'll be days away from delicious home brew! Makes 5 gallons of finished beer Flash Brewing® Kits Introducing MoreBeer!'s Flash Brewing® Kits! Designed for both novice and seasoned homebrewers, these innovative recipe kits allow you to simply mix the ingredients with water and add yeast for fermentation. This streamlined process not only saves you valuable time but also simplifies brewing without sacrificing flavor. Say hello to a faster, easier way to craft exceptional beer at home. Typically, brewing requires you to boil your malt and hops for one hour, followed by another hour for cooling. Flash Brewing® eliminates the need to boil. Our Flash Brewing® malt recipes have been boiled and whirlpooled before they are dried. We then use a HopBite™ shot for bitterness combined with a mix of traditional hop pellets for flavor. Flash Yeast™ starts quickly and consistently produces clean beer that lets the malt and hops shine. The result is a high-quality beer that will absolutely surprise you. If you want to read more about the development of Flash Brewing at MoreBeer! or have more questions please read our Frequently Asked Questions. The Flash Brewing® Equipment Kit was made for beginner brewers who might not already own some of the essential equipment needed to brew Flash Brewing® recipe kits. Flash Brews can be fermented in any wide mouth 6 or 7-gallon fermenter. The 7-gallon Fermonster fermenter is a perfect choice as the wide mouth allows you to easily pour in the ingredients. Kit Includes: 7-Gallon Fermonster Fermenter & Spigot Airlock & Stopper Bottle Filler & Tubing Fermenter Lid Opener Star San Sanitizer Instructions Your Choice of Recipe: Citra® Session Pale Ale A sessionable beer with a light color and low ABV. Citrus and tropical fruity hop character on full display. 4.9% ABV | 30 IBUs Blonde Ale An easy drinking ale, low in esters, and balanced with enough hop character to accentuate the malt profile. 4.9% ABV | 15 IBUs Cali Mountain Pale Ale Inspired by one of the most iconic pale ales in the country: Sierra Nevada's Pale Ale. A simple recipe that creates a complex yet crushable brew. 5.6% ABV | 30 IBUs Best Buds Pale Ale Mosaic ® and Citra ® combine their complementary hop flavor profiles for a crowd-pleasing, smooth pale ale. 5.8% ABV | 30 IBUs Pilsner An homage to the classic Pilsner style, with a white, frothy head that laces beautifully on the glass. 5.8% ABV | 30 IBUs Flash Brewing recipe kits do not include priming sugar. For bottling, we recommend PopTops™ Swing Top Bottles and Pop Shots Carbonation Tablets.   Citra®, Mosaic® and Cryo Hops® are registered trademarks owned by Yakima Chief Hops, LLC.

Read more less

Advanced Modular Control System: Designed for homebrewers and microbreweries, the Brewtools FCS brings industrial-level precision with features like temperature, pressure, and gravity monitoring for ultimate brewing control. Comprehensive Starter Kit: Includes essential components such as FCS Display and I/O Modules, temperature and pressure sensors, and all necessary cables and adapters to start customizing your fluid control setup. Automated Fermentation Profiles: Automate cooling, heating, and pressure management with software-driven profiles, simplifying complex processes while ensuring consistency in your brews. Expandable & Customizable: Add solenoids, pumps, airlocks, and adapters to fit your specific brewing needs, compatible with both Brewtools and non-Brewtools tanks. Constant Monitoring & Alerts: Early warning notifications for equipment issues like solenoid valves or heating elements ensure smooth operation and protect your brewing investment. This version of the FCS Kit includes the Density/Temp Sensor which replaces the temperature-only sensor in the basic FCS Starter Kit. FCS is a modular control system designed, developed and manufactured by Brewtools in Norway. The vision behind the system is to take industrial technology and make that available for microbreweries and homebrewers. Using the latest electronic component technology and clever software engineering, Brewtools is able to make features that used to be very expensive and complicated available for everyone. The system can measure temperature, pressure, density/gravity*, level* and power consumption and based on that — control cooling, heating, pressure/CO2 in, pressure/CO2 out, agitation*, automatic hop additions* under pressure and more! Fermentation profiles will automate the whole process and give you ultimate control of your fermentation process. (*Not available at first launch.) The system will also constantly monitor the process and notify you if something isn't right. For example, the system will measure the current draw of solenoid valves and heating elements, and will notify you if these components aren't working as they should. Please Note: The software is currently in a state of early adopter beta, and should not be used for critical production. Brewtools will continue to develop software and new sensors/actuators based on customer feedback and requests. If you cannot find a sensor or actuator that fits your setup, please reach out to us and let us know. Note that we do not take responsibility for any lost/destroyed beer or raw materials. Brewtools FCS Starter Kit The Brewtools FCS Starter Kit includes all the essential parts to get you started setting up your own custom-designed Fluid Control System. FCS Display Module and FCS I/O Module with power supply 1 density/temp sensor (TC 1.5") 1 pressure sensor with gas out solenoid All cables and adapters needed (3m length) The kit does not include a valve/pump for cooling as these are tank dependent, and you may already have a solenoid for your existing glycol loop. For non-Brewtools tanks, you also may need an adapter and/or tee to connect the spunding valve/pressure sensor assembly. Accessories To complete your FCS kit setup, some accessories are needed. A solenoid for cooling (Ø4.5mm - 34mm or 1.5") with 2-pin LP12 cable and DIN43650 Type A adapter or a submersible pump (comes with cable). A ball clamp and a connecting rod. An airlock for the pressure out solenoid valve is recommended. For smaller tanks we recommend our polycarbonate airlock. For larger tanks (300L+) you should use a TC34mm to 12mm barb and a 10x16mm silicone tube or equivalent. Tri-Clamps and gaskets. Based on your tank and setup, you may need some extra tri-clamps or gaskets. For MiniUni+, you need to replace the Mini Spunding valve with an M24 to Tri Clamp adapter and a 90 degree TC34mm elbow to fit your spunding assembly (if you want to use our TC air lock. No need for elbow if you use tubing as airlock). Remember clamps/gaskets. If you don't have a Brewtools Unitank, we recommend getting a TC 1.5" to 34mm adapter for the spunding setup. You will also need a 34mm Tri-Clamp and 34mm gasket. Tees and crosses are also available in multiple sizes to give you more ports. Setting Up the FCS for Your Tank Mounting To mount to your tank a ball clamp and a connecting rod are very useful. This will work with most any size or style tank. Solenoid Valve & Related Connection Hardware for Cooling For Brewtools tanks that use 34mm connection you will need a Ø4.5mm - 34mm solenoid valve. For BrewBuilt, Spike, Ss BrewTech, or Commercial tanks you will need a TC 1.5" to 34mm adapter and 1.5" TC Solenoid Valve. Either way, you will need a 2-pin LP12 cable and DIN43650 Type A adapter to connect the solenoid valve to the Brewtools FCS I/O Module. Would You Like a Visible Air Lock on the Spunding Valve? The Brewtools pressure relief solenoid spunding valve releases CO2 at the set point you choose on your controller. To visually see the CO2 release, adding on an airlock for the pressure out solenoid valve is a nice option. For tanks under 300L, we recommend the 34mm polycarbonate airlock that connects to the Brewtools Solenoid Valve. For tanks larger than 300L, you should use a blowoff. For blowoffs, use a TC34mm to 12mm barb and a 10x16mm silicone tube or equivalent ran into a bucket of water. You will also need a 34mm Tri-Clamp and 34mm gasket. Tees and crosses are also available in multiple sizes to give you more ports. For the MiniUni+ For MiniUni+, you need to replace the Mini Spunding Valve with an M24 to TC adapter and a 90-degree 34mm TC elbow to fit your spunding assembly (if you want to use the TC air lock. No need for elbow if you use tubing for a blowoff). You will need the clamps/gaskets to make the connection. Starter Kit Included Parts: FCS Display Module, 5" FCS I/O Module 2x RTD, 5x CAN, 4x Relay Power Supply, 24V 40W, LP12-pin Pressure Sensor, CAN BUS 24V, M12 Solenoid valve, TC34mm + M12, DC24V Ø2.0 Density/Temp Sensor, TC 1.5", CAN BUS 24V Cable, LP12 6-pin, 3m Cable, LP12 5-pin, 3m (2 pcs) Cable, LP12-pin, 3m Adapter, LP12-pin to DIN 43650 Type B Recommended Separate Parts: Solenoid valve for cooling with adapters/cables or submersible pump Ball Mount connector and pipe clamp etc. Airlock (Top mounted or barb with silicone tube) Adapters and fittings to fit your tank Brewtools Product Number: 7713792

Read more less

Ferment, cold crash, and carbonate beer all in one vessel with the Brewtools F-Series Unitank Cooling jacket welded to the vertical walls of the tank provide superior cooling capabilities compared to in-solution cooling coils Made from stainless steel throughout with Brewtools' proprietary PureBlast™ surface—no passivation required, simply rinse with warm water before your first use Pressure rated to 30 PSI so you can safely ferment under pressure and pressure transfer finished beer to kegs with virtually no oxygen pickup Brewtools is a Norwegian brand known for high-quality products made without compromise. From brewing systems to fermenters, they continue to push the envelope of innovation for homebrewers around the globe All valves, fittings, and gaskets come included Brewtools Unitanks are fermenters made for ambitious homebrewers and small breweries. As part of the Brewtools identity, they've explored new techniques and solutions. This has resulted in a series of high end fermentation tanks with new features and a lot of possibilities. Key Features: Brewtools PureBlast™ surface inside and out which eliminate the use of wax and polishing compounds and does not require passivation. Cooling jacket in the vertical walls offers efficient cooling without the hassle of cleaning a spiral. Many options for connecting accessories like sensors, heaters, carb. stones and other accessories. Pressure rated for 2 bar / 30 PSI Cooling jacket pressure rated for 0.5 bar / 7 PSI 8" TC port on top for easy access. 2" TC dump and racking valves. BrewTools Unitanks are designed and manufactured with special attention to safety and quality. They are tested and certified according to the requirements for PED 2014/68/EU by a third party. Specifications: Low height w/o acc.: 66.1" Max height w/o acc.: 74" Packaging size: 70.8" (h) x 28.3" (w) x 28.3" (d) Net weight: 167.1 lbs Gross weight: 209.4 lbs Tank diameter (inside): Ø23.6" Gross volume: 81.8 gal Max rec. volume: 76.6 gal Min rec. volume: 31.7 gal Volume, cone: 10.5 gal Material: 1.5mm stainless steel (SS304) Operating pressure: 1.0 bar / 15 PSI Max pressure: 2.0 bar / 30 PSI In the box: Unitank with adjustable frame 1 pcs Analog pressure gauge, TC34mm 2 pcs Butterfly-valve, 2" 1 pcs Butterfly-valve, 34mm DN20 1 pcs Blow-off pipe 1 pcs Racking arm 2" 1 pcs TC elbow 90°, 2" 1 pcs Insulation jacket, black neoprene 1 pcs Sample valve, 34mm 1 pcs TC Adapter 8"-4" 1 pcs TC blind cap, 4" 1 pcs TC blind cap 2" 2 pcs TC blind cap 1.5" 3 pcs TC blind cap 34mm 2 pcs TC gasket 8" lipped 2 pcs TC gasket 4" 2 pcs TC gasket 2" 5-pack 1 pcs TC gasket 1.5" 5-pack 3 pcs TC gasket 34mm 5-pack 1 pcs Tri Clamp 8" 1 pcs Tri Clamp 4" 5 pcs Tri Clamp 2" 2 pcs Tri Clamp 1.5" 10 pcs Tri Clamp 34mm 1 pcs TC tool 4 pcs M10 steel/rubber feet 1 pcs TC34mm safety valve (PRV, 2 bar) Necessary bolts and parts for assembly 5 year manufacturer's warranty Recommended accessories include: HopDrop-kit, Thermowells for your sensors, 34mm Ball-Lock gas adapter for CO2 filling, Coil for sample valve, Spunding valve, Hose barbs for filling and dumping, etc. For User Manuals and support, please follow this link to Brewtools Docs. NOTE: Model in photo is a prototype. Minor changes and improvements may occur.

Read more less

Accurately measure your starting and finishing gravity in beer or wine Triple scaled in specific gravity, potential alcohol, and Brix Comes with storage tube and directions Hydrometers are one of the most necessary tools in homebrewing. Our Triple Scale Hydrometer allows you to read your gravity, potential alcohol content, and brix. A hydrometer is perhaps the most essential piece of measuring & testing equipment in any home brewery. Used it at every stage of brew to keep up with the health and progress of your brew.  This convenient hydrometer features three scales--specific gravity, potential alcohol and brix--and is handy for both brewing and winemaking. It measures 9 inches long and comes with complete, detailed instructions for proper use.  Scale Ranges: Specific Gravity: 0.982 - 1.160 Potential Alcohol: 0-20% Brix: -4 - 35  

Read more less

Our Arrogant Bastard clone easily has one of the most complex malt profiles of any of our kits Includes Magnum and Chinook hops Estimated ABV: 7.1% Estimated IBUs: 68-72 Makes 5 gallons of finished beer Big, bold, and full of flavor.  The Pompous Ass Ale is a rendition of one of the most egotistical beers in America, and is not for the light-beer lover.  In fact, if you prefer a beer that looks and tastes more like water, we recommend you leave this page immediately.  Your feelings might get hurt just reading about it... Our Arrogant Bastard clone easily has one of the most complex malt profiles of any of our kits.  The clean bitterness from Magnum hops allows the rich flavors of Aromatic, Special B, and Caramel Munich malts to control your taste buds.  The aromatics of Chinook hops blend perfectly with these malts, creating an intense combination of confusion and satisfaction at the same time.  After your first sip, if you're thinking "Whoa.  That was interesting, intense, & delicious!" you know you brewed it right! Makes 5 gallons Estimated Original Gravity: 1.066-70 SRM (Color Range): 16-18 IBUs: 68-72 Estimated Alcohol Percentage: 7.1%   Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”.  For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All included steeping grains will come milled.   Liquid Malt Extract (LME) vs. Dried Malt Extract (DME) MoreBeer! recipe kits are offered in both Liquid Malt Extract and Dry Malt Extract so that our customers can choose the format that best suits their needs and brewing style. LME is a viscous liquid, similar in consistency to maple syrup. In addition to being the more affordable option, many brewers find LME easier to handle than dry extract. DME is more condensed and comes in a powder format that is similar to baking flour. Although it’s a little more costly, DME is naturally lighter in color and stays fresher for longer. We highly recommend DME when brewing light colored beers.      

Read more less

Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. The current estimated availability is October.   Large 11 gallon preboil capacity Powerful 3,300 watt heating element Color LCD controller magnetically mounted for easy removal and cleaning Wireless control via the Grainfather Community App Dual stage false bottom to prevent stuck sparges Wort chiller included The Grainfather G40 brewing system has a bigger capacity and better connectivity. Produce up to 40L (11 US Gal) of beer from one brew and connect your mobile device to the smart controller with built-in wireless control via the Grainfather App, for step-by-step brewing and access to bazillions of recipes. The Grainfather G40 is the latest brewing system in the G Series range from Grainfather. Packed with all of the innovative features you can find in the G70, this brewing system is your new best friend for brews up to 11 gal (40L), perfect to fill two 5 gal corny kegs. With a max grain bill of 29 lb., you can choose to add extra grain and less liquid to make beer with an ABV over 9%.   Manage your brew remotely with step-by-step brewing with the smart wireless controller. All you need to do is connect your mobile device to the controller and control your brew through the FREE Grainfather app where you have access to bazillions of recipes to choose from, or create your own!   Please Note - this system comes standard with a NEMA 6-15P plug, and requires access to a 220v-240v power supply.   Features: G40 body built with sleek 304-grade stainless steel Large, surface mounted heated elements heat wort evenly Connect your mobile device to the smart wireless controller via the Grainfather App (link to the Grainfather app page) and manage your brew remotely. The Grainfather app gives you access to brewing tools and calculators to brew with confidence, and bazillions of recipes to choose from or create your own. Reach your expected gravity with a conical base for maximum wort transfer Comes with a counterflow wort chiller for a more efficient and sanitary brew transfer PID heating control for accurate temperature management during mashing Quick and easy cleaning with CIP (clean in place) capability An integrated sight glass for easy volume reading Rolled edge mash plate and large hop filter to reduce blockages What's Included: Grainfather G40 Smart controller with built-in wireless connectivity Counterflow wort chiller Glass lid Lifting bar Inner basket Recirculation hose Grain plate Hop filter Fittings Specs: Size: 26" x 21" Weight: 64lb Capacity: 12 gal Batch volume Maximum: 11 gal (40L) Minimum: 3 gal (10L) Grain bill Maximum: 29 lb (13kg)* Minimum: 7 lb (3kg) *Max weight depends on grain crush, type, and variety. Large grain bills may also require the use of an additional grain plate." Power: 3300W, 240V Connectivity: Wireless control  

Read more less

The B80pro is a brewing system without compromise. Built for enthusiasts. 90-liter (23 gal) tank volume and 20kg (44 lb) malt capacity 30-80 liter (8-21 gal) pre-boil volume for flexibility 6kW heating power (2x3kW) utilizing two mains inputs makes heating and boiling fast High accuracy with 2 digital sensors Conical bottom with center draining for fast and easy cleaning Powerful control system with 7" touch-screen, Wifi and Bluetooth 4.2 The B80pro has an 80 liter (21 gal) boil capacity and about 20kg (44 lb) malt capacity. It is equipped with a powerful pump, which can be controlled from the touch-screen. The wort is circulated up through the center-pipe and the pump is fitted using Tri-Clamps making it very easy to remove, even when the tank is full. The malt pipe has latches that folds out when you lift it, so you can use both your hands for lifting. Sparging is done without tubes or pipes outside the tank. A sparge tube installed on the outside of the centerpipe follows the malt pipe when lifted also lifting the wort spreading device. This makes it very easy to sparge from a separate tank without making a mess. After brewing with the B80pro, you never have to turn it upside down for cleaning. The centerpipe is removed easily, and you can easily clean the unit, and all the trub will be drained directly to a bucket or the drains. Use the included circulation device as a CIP solution to save time and cleaning chemicals. The system has two digital temperature sensors - one in the bottom of the tank and one before the pump. The maxium static offset is ±0,5°C. The sensors can be individually calibrated for maximum accuracy. They have an accuracy of 0.1°C. It's also possible to connect a third sensor (accessory) to monitor the temperature of the wort returning from the counterflow cooler, so you can pump directly to the fermenter when the temperature is right. With powerful heating elements combining over 6kW (230V) of power, heating the water or wort is very fast. During the boil, the PID system is deactivated and you can adjust the power output to achieve the perfect rolling boil. You can also adjust the maximum current of each mains input, to 10, 13, 15 and 16 Amps, to make sure you never blow a fuse. All ports are 34mm Tri-Clamp fittings for maximum flexibility without leaks. As standard the system is shipped with one 3-way valve. All silicone tubes are 16x25mm food grade silicone. The control system is custom developed and features high quality electronics. The software is constantly being improved with new features. It is updated via WiFi. Specifications: Dimensions excl. packaging: 26.5" H x 24.4" W x 24.4" D Dimensions with one side valve: 26.5" H x 28.3 W x 24.4" D Dimensions with two valves: 26.5" H x 32.3 W x 24.4" D Packaging dimensions: 32.6" H x 24.4" W x 24.4" D Weight excl. packaging: 60 lbs Weight incl. packaging: 75 lbs Tank dimensions: Ø19.6", height 18.1" Tank volume: 23.7 gal (rec maximum boil volume – 21.1 gal) Malt pipe dimensions: Ø16.5", height 16.5" Malt pipe volume: 15.3 gal Max recommended grain quantity: 44 lbs Minimum liquid volume: 6.6 gal Build material: 1.0 mm stainless steel (SS304) Heating elements: 230V, 6000W (2x3000W) Pump: 24VDC brushless, max 6.6 gal/min, max head 14.7 ft, stainless steel head, stepless speed control from touch display Controller: ARM Cortex M4 180mhz, 7" Touch display Connectivity: WiFi 802.11 b/g/n, Bluetooth 4.2, MicroSD Hoses: 16x25mm silicone, food grade What's included: Complete brewing system with controller, pump, tank sensor, heaters and lid Malt pipe with handle and latches 1 pcs expanded metal filter 1 pcs 3-way valve Temperature sensor with adapter for pump line 5 pcs 34mm Tri Clamps with gaskets (all used for standard setup) 3 pcs 34mm TC blind caps 1 pcs dip tube, short type 1 pcs mash hat for spreading the wort 1 pcs sparge tube 150cm 16x25mm silicone tube 1 pcs 34mm TC to 19mm hose barb adapter O-rings for the center pipe and dip tube 2 Nema 6-20 power cables, 2 meter 5 year manufacturer's warranty Please note that some parts of Brewtools systems are made by hand, and might have some minor cosmetic imperfections. This will not affect the functionality of the product. For User Manuals and support, please follow this link to Brewtools Docs.

Read more less

Ferment, cold crash, and carbonate beer all in one vessel with the Brewtools F-Series Unitank Cooling jacket welded to the vertical walls of the tank provide superior cooling capabilities compared to in-solution cooling coils Made from stainless steel throughout with Brewtools' proprietary PureBlast™ surface—no passivation required, simply rinse with warm water before your first use Pressure rated to 30 PSI so you can safely ferment under pressure and pressure transfer finished beer to kegs with virtually no oxygen pickup Brewtools is a Norwegian brand known for high-quality products made without compromise. From brewing systems to fermenters, they continue to push the envelope of innovation for homebrewers around the globe All valves, fittings, and gaskets come included Brewtools Unitanks are fermenters made for ambitious homebrewers and small breweries. As part of the Brewtools identity, they've explored new techniques and solutions. This has resulted in a series of high-end fermentation tanks with new features and a lot of possibilities. Key Features: Brewtools PureBlast™ surface inside and out which eliminate the use of wax and polishing compounds and does not require passivation Cooling jacket in the vertical walls offers efficient cooling without the hassle of cleaning a coil Many options for connecting accessories like sensors, heaters, carb. stones and other accessories Conical pressure rated for 2 bar / 30 PSI Cooling jacket pressure rated for 0.5 bar / 7 PSI 8" TC port on top for easy access 2" TC dump and racking valves Brewtools Unitanks are designed and manufactured with special attention to safety and quality. They are tested and certified according to the requirements for PED 2014/68/EU by a third party. Specifications: Low height w/o acc.: 32.6" Max height w/o acc.: 40.5" Packaging size: 33.4" (h) x 20.5" (w) x 20.5" (d) Net weight: 84 lbs Gross weight: 98 lbs Tank diameter (inside): Ø15.75" Gross volume: 13.5 gal Max rec. volume: 10.5 gal Min rec. volume: 5.3 gal Volume, cone: 3.1 gal Material: 1.5mm stainless steel (SS304) Operating pressure: 1.0 bar / 15 PSI Max pressure: 2.0 bar / 30 PSI In the box: Unitank with adjustable frame 1 pcs Analog pressure gauge, TC34mm 2 pcs Butterfly-valve, 2" 1 pcs Butterfly-valve, 34mm DN20 1 pcs Blow-off pipe 1 pcs Racking arm 2" 1 pcs TC elbow 90°, 2" 1 pcs Insulation jacket, black neoprene 1 pcs Sample valve, 34mm 1 pcs TC Adapter 8"-3" 1 pcs TC blind cap, 3" 1 pcs TC blind cap 2" 2 pcs TC blind cap 1.5" 3 pcs TC blind cap 34mm 2 pcs TC gasket 8" lipped 2 pcs TC gasket 3" 2 pcs TC gasket 2" 5-pack 1 pcs TC gasket 1.5" 5-pack 3 pcs TC gasket 34mm 5-pack (DN20) 1 pcs Tri Clamp 8" 1 pcs Tri Clamp 3" 5 pcs Tri Clamp 2" 2 pcs Tri Clamp 1.5" 10 pcs Tri Clamp 34mm 1 pcs TC tool 4 pcs M10 steel/rubber feet 1 pcs TC34mm safety valve (PRV, 2 bar) Necessary bolts and parts for assembly 5 year manufacturer's warranty Recommended accessories include: HopDrop-kit, Thermowells for your sensors, 34mm Ball-Lock gas adapter for CO2 filling, Coil for sample valve, Spunding valve, Hose barbs for filling and dumping, etc. For User Manuals and support, please follow this link to Brewtools Docs. NOTE: Model in photo is a prototype. Minor changes and improvements may occur.

Read more less

This BrewMaster Series kit was scaled down to a homebrew batch size in collaboration with the brewmasters at Danville Brewing Company This celebration of hop flavor is packed with bright, citrusy tropical aromas that jump from the glass Includes Magnum, Cascade, Citra®, Mosaic®, and Strata hops Estimated ABV: 8.2% Estimated IBUs: 100 Makes 5 gallons of finished beer Chux DIPA from Danville Brewing Company in Danville, CA is all about the hops. This celebration of hop flavor is packed with bright, citrusy tropical aromas that jump from the glass! Most of the IBUs come from a "First Wort" addition of Magnum. This process refers to adding hops to your kettle as soon as you begin collecting wort from your completed mash, resulting in a very smooth bitterness up front. From there, healthy aroma additions of Cascade, Citra®, Mosaic®, and Strata are combined for an incredibly expressive Double IPA. Danville's Chux DIPA beat out 218 other entries to bring home Bronze in the Imperial India Pale Ale category at the Great American Beer Festival in 2017. Makes 5 gallons Estimated Original Gravity: 1.071-76 SRM (Color Range): 4-5 IBUs: 100 Estimated Alcohol Percentage: 8.2% Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”.  For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts. Citra® and Mosaic® are registered trademarks owned by Yakima Chief Hops, LLC.

Read more less

A classic ESB recipe with a firm hop bitterness and mellow hop flavor Includes Northern Brewer and British Kent Goldings hops Estimated ABV: 4.5% Estimated IBUs: 39-42 Makes 5 gallons of finished beer Big, smooth malt flavor and the mellow aroma of British Kent Golding. In the English draft style, with a firm hop bitterness and mellow hop flavor. Makes 5 gallons Estimated Original Gravity:1.045-49 SRM (Color Range): 11 IBUs: 39-42 Estimated Alcohol Percentage: 4.5% Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”.  For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts.    

Read more less

The BrewBuilt Butterfly Valve has all the standard advantages you would expect from a butterfly valve in that they are the most sanitary valve, easy to clean and won't trap wort inside. It has a custom polished stainless steel handle which is designed to fit perfectly with the BrewBuilt conical fermenters and tri-clamp kettles. 1.5" tri-clamp Stainless steel handle 7 locking positions Squeeze trigger locking handle Made from 304 stainless steel   Please Note: 2" valve shown as example photo. Updated images coming soon.

Read more less

Preheat your mash before beginning the brewing process with this 1000W Electric Bucket Heater. This handy little tool works in conjunction with a product like the Ranco or Johnson temperature controller by enabling you to set an exact hot liquid temperature on the controller, and then attaching it to the bucket heater. The temperature controller will turn off the bucket heater once it reaches your desired temperature. Our bucket water heater is designed to use with water in a bucket or cooler where an open flame cannot be used, and you can even use it to heat a bucket of water for cleaning with a powdered brewery wash. This water bucket heater measures 17 inches from the handle to the tip and comes with a 6-foot long cord. It requires at least 6 inches of water for full submersion, and it can only be used with a maximum depth of 14 inches.  Unit has stainless steal heating element and guard.  Does not include clip for mounting.  Please Note - Having electrical devices around liquid can be hazardous, and should not be left unattended. Please use caution while using this device, and read the instruction manual prior to use.

Read more less

Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. Storage, packaging, and finishing tanks made for ambitious homebrewers and small breweries Cooling jacket welded to the vertical walls of the tank provide superior cooling capabilities compared to in-solution cooling coils Made from stainless steel throughout with Brewtools' proprietary PureBlast™ surface—no passivation required, simply rinse with warm water before your first use Pressure rated to 30 PSI so you can safely carbonate and pressure transfer finished beer to kegs with virtually no oxygen pickup All valves, fittings, and gaskets come included Brewtools Brite Tanks are storage, packaging, and finishing tanks made for ambitious homebrewers and small breweries. As part of the Brewtools identity, they've explored new techniques and solutions. This has resulted in a series of high-end tanks with new features and a lot of possibilities. Key Features: Brewtools PureBlast™ surface inside and out which eliminate the use of wax and polishing compounds and does not require passivation. Cooling jacket in the vertical walls offers efficient cooling without the hassle of cleaning a spiral. Many options for connecting accessories like sensors, carb. stones and other accessories. Pressure rated for 2 bar / 30 PSI. 8" TC port on top for easy access. 2" TC dump valve 3x 1.5" DN32 ports (1 on the back) + 1x TC34mm port for sample valve Brewtools Brite Tanks are designed and manufactured with special attention to safety and quality. They are tested and certified according to the requirements for PED 2014/68/EU by a third party. Specifications: Height without accessories: 28.3" (72 cm) Packaging size: 25.1" (h) x 19.6" (w) x 19.6" (d) Net weight: TBD Gross weight: TBD Tank diameter (inside): 15.7" Ø Gross volume: 12.1 gallons Max rec. volume: 10.5 gallons Min rec. volume: 5.2 gallons Material: 1.5mm stainless steel (SS304) Operating pressure: 1.0 bar / 15 PSI Max pressure: 2.0 bar / 30 PSI   The tank comes with insulation jacket, stainless steel butterfly valve and the necessary piping and clamps/gaskets. For more detailed information and user manual, please visit docs.brewtools.com

Read more less

A very full, robust beer that is richer, maltier, and less bitter flavor than our American Brown Ale Includes 100% Northern Brewer hops Estimated ABV: 5% Estimated IBUs: 28-32 Makes 5 gallons of finished beer Our Nut Brown Ale has a richer, maltier, less bitter flavor than the American Brown Ale. Victory malt provides a nutty, biscuity flavor. A very full, robust beer.  This Nut Brown Ale recipe is an excellent option in the fall and winter months! Makes 5 gallons Estimated Original Gravity:1.052-55 SRM (Color Range): 16 IBUs: 28-32 Estimated Alcohol Percentage: 5%   Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”.  For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All included steeping grains will come milled.   Liquid Malt Extract (LME) vs. Dried Malt Extract (DME) MoreBeer! recipe kits are offered in both Liquid Malt Extract and Dry Malt Extract so that our customers can choose the format that best suits their needs and brewing style. LME is a viscous liquid, similar in consistency to maple syrup. In addition to being the more affordable option, many brewers find LME easier to handle than dry extract. DME is more condensed and comes in a powder format that is similar to baking flour. Although it’s a little more costly, DME is naturally lighter in color and stays fresher for longer. We highly recommend DME when brewing light colored beers.        

Read more less

The insulation jacket reduces heat loss during brewing. Recommended for use outdoor or in colder environments. For B40pro brewing system.

Read more less

Kettle Maximizer allows you to pull liquor or wort from below the depth of your kettle's bottom port Angle straight down in hot liquor tanks to maximize pick up Rotate to your preferred pick-up height in boil kettles to leave trub behind when transferring to fermenter The tri-clamp maximizer is recommended for boil kettles and hot liquor tanks with 1.5" T.C. bottom ports. This fitting will allow you to pull liquor or wort from below the depth of your kettle's bottom port without the need to tip your vessel. For hot liquor tanks, point the end of the tube straight down to maximize pick up. For boil kettles, you can rotate the maximizer to position the end of the tube at your preferred height above the bottom of the kettle, leaving room for a layer of trub that will be left behind in the kettle when you transfer wort to your fermenter. 1.5" tri-clamp Tube Length: 6.5" Overall Length: 8.18" Made from stainless steel

Read more less

Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. Please Note: The product description, photos, and instructions for this kit state that it includes CellarScience Foam Axe. Due to a supply shortage, this kit may contain FermCap S as a substitute. Both are excellent foam control agents and can be used interchangeably. This is a no compromise, professional level hardware kit that allows for safe pressure fermentation in an X-Series Uni Conical. If you plan to ferment, or to seal/cap an active fermentation, in your BrewBuilt X-Series Conical you must use this Brewbult Kit for Fermenting Under Pressure.  During fermentation Krausen can potentially clog the PRV that is built into the lid.  The hardware in this kit is the same as what you will find on a commercial Unitank. This is not an all-in-one unit. All-in-one units are cheaper but not as safe. Component Break Down: Commercial Grade Spunding Valve - The kit is built around a commercial Spunding Valve that allows you to set your desired fermentation pressure. if that ferementation pressure exceeds your set point, it will blow off any excess pressure from the X-Series Conical. The clear cup holds liquid acting as an airlock and allowing krausen to exit. The Spunding valve is also adjustable. Pro Grade PRV (Pressure Relief Valve) - On all brewery pro tanks, a tri-clamp PRV is always installed in addition to a Spunding Valve. This is because a Spunding Valve still has the potential to clog. The pro PRV has a very wide interior body as to reduce the risk of clogging. The PRV is non-adjustable and comes preset to relieve pressure at 15 PSI. Sealed Pressure Gauge - This is a liquid filled, sealed gauge. The bottom of the gauge is a thin plate of stainless that moves up or down in relation to pressure in the tank. That causes the oil in the gauge to compress which is what the gauge reads. When properly sealed, there is no way krausen can get into this gauge and cause a false reading. However, it is important to ensure the guage is sealed, otherwise, there is a risk that krasuen clogs the gauge giving you an inaccurate reading.  Foam Axe - Foam Axe is a silica-based krausen cutter used by commercial breweries to reduce krausen blow off while increasing foam retention in your beer. Using Foam Axe is required for every batch fermented under pressure, but we recommend it for all batches fermented in your X-Series Conical. Foam Axe helps keep krausen out of PRVs and other hardware which is always a good idea. When your BrewBuilt Uni is outfitted with a Kit for Pressure Fermentation there are three devices for relieving pressure, including the PRV that is always built into the lid, the adjustable Spunding Valve, and the pro grade PRV.   Includes: Commercial Grade BrewBuilt Spunding Valve 1 BAR (0.3–14.5 psi) Hand Adjustable Blowoff 1.5" tri-clamp Connection Made from 304 stainless steel with plastic liquid cup Tri-Clamp Pressure Relief Valve (PRV) Calibrated to 1 BAR (14.5 psi) 1.5" tri-clamp connection Made from 304 stainless steel Sealed, Liquid Filled Pressure Gauge Calibrated to 2 BAR (30 psi) 1.5" tri-clamp connection Made from 304 stainless steel CellarScience Foam Axe Krausen Reducer Reduces krausen build up inside the fermenter Connection Hardware (3) 1.5" T.C. Clamps (3) 1.5" EPDM T.C. Gaskets   WARNING! The use of the BrewBuilt Kit for Fermenting Under Pressure is required for performing Pressure Fermentations in your X-Series conical. The PRV built into the lid is not designed to be the only release point during a pressure fermentation.  WARNING! The use of Foam Axe is required to reduce krausen (foam from fermentation) production in the fermenter.  WARNING! Always release pressure, then remove the PRV built into the lid to ensure the conical is completely depressurized before removing fittings or the lid clamp. Failure to do so can result in personal injury.   

Read more less

Ferment, cold crash, and carbonate beer all in one vessel with the Brewtools F-Series Unitank Cooling jacket welded to the vertical walls of the tank provide superior cooling capabilities compared to in-solution cooling coils Made from stainless steel throughout with Brewtools' proprietary PureBlast™ surface—no passivation required, simply rinse with warm water before your first use Pressure rated to 30 PSI so you can safely ferment under pressure and pressure transfer finished beer to kegs with virtually no oxygen pickup Brewtools is a Norwegian brand known for high-quality products made without compromise. From brewing systems to fermenters, they continue to push the envelope of innovation for homebrewers around the globe All valves, fittings, and gaskets come included Brewtools Unitanks are fermenters made for ambitious homebrewers and small breweries. As part of the Brewtools identity, they've explored new techniques and solutions. This has resulted in a series of high-end fermentation tanks with new features and a lot of possibilities. Key Features: Brewtools PureBlast™ surface inside and out which eliminate the use of wax and polishing compounds and does not require passivation Cooling jacket in the vertical walls offers efficient cooling without the hassle of cleaning a coil Many options for connecting accessories like sensors, heaters, carb. stones and other accessories Pressure rated for 2 bar / 30 PSI Cooling jacket pressure rated for 0.5 bar / 7 PSI 8" TC port on top for easy access 2" TC dump and racking valves Brewtools Unitanks are designed and manufactured with special attention to safety and quality. They are tested and certified according to the requirements for PED 2014/68/EU by a third party. Specifications: Low height w/o acc.: 43.3" Max height w/o acc.: 51.2" Packaging size: 44.5" (h) x 20.5" (w) x 20.5" (d) Net weight: 99 lbs Gross weight: 110 lbs Tank diameter (inside): Ø15.75" Gross volume: 22.7 gal Max rec. volume: 21.1 gal Min rec. volume: 5.3 gal Volume, cone: 3.1 gal Material: 1.5mm stainless steel (SS304) Operating pressure: 1.0 bar / 15 PSI Max pressure: 2.0 bar / 30 PSI In the box: Unitank with adjustable frame 1 pcs Analog pressure gauge, TC34mm 2 pcs Butterfly-valve, 2" 1 pcs Butterfly-valve, 34mm DN20 1 pcs Blow-off pipe 1 pcs Racking arm 2" 1 pcs TC elbow 90°, 2" 1 pcs Insulation jacket, black neoprene 1 pcs Sample valve, 34mm 1 pcs TC Adapter 8"-3" 1 pcs TC blind cap, 3" 1 pcs TC blind cap 2" 2 pcs TC blind cap 1.5" 3 pcs TC blind cap 34mm 2 pcs TC gasket 8" lipped 2 pcs TC gasket 3" 2 pcs TC gasket 2" 5-pack 1 pcs TC gasket 1.5" 5-pack 3 pcs TC gasket 34mm 5-pack (DN20) 1 pcs Tri Clamp 8" 1 pcs Tri Clamp 3" 5 pcs Tri Clamp 2" 2 pcs Tri Clamp 1.5" 10 pcs Tri Clamp 34mm 1 pcs TC tool 4 pcs M10 steel/rubber feet 1 pcs TC34mm safety valve (PRV, 2 bar) Necessary bolts and parts for assembly 5 year manufacturer's warranty Recommended accessories include: HopDrop-kit, Thermowells for your sensors, 34mm Ball-Lock gas adapter for CO2 filling, Coil for sample valve, Spunding valve, Hose barbs for filling and dumping, etc. For User Manuals and support, please follow this link to Brewtools Docs. NOTE: Model in photo is a prototype. Minor changes and improvements may occur.

Read more less

New Kegs are trouble-free for years Rubber top and bottoms protect floors from dings Perfect laser welds ensure easy sanitation and reduced risk of contamination Made in Italy by AEB, a long-time manufacturer with impeccable attention to detail Ditch the bottles and start kegging today! Save time, reduce the risk of infection and get all those bottles out of the kitchen for good! This brand new 5 gallon keg offers convenience, security and insurance when compared to used or reconditioned kegs. There's no need to replace gaskets or other parts, no need to trust that someone else did a good job with reconditioning, and no possibility of residual flavor or aromas getting into your beer! We import these 5 gallon Cornelius Kegs from AEB Italy, a long-time manufacturer with impeccable attention to detail. Perfect laser welds ensure easy sanitation and reduced risk of contamination. While newer kegs shipped from China may have modern features, they do not provide perfect laser welds and therefore risk contamination over time. You'll be glad you paid a bit extra for this high-quality keg. Tack on our famous Fast & Free shipping and you've got a great quality keg at an amazing value! Ball Lock Style Corny Keg 5 gallon capacity 9" Diam. x 25" Height Maximum working pressure of 130 PSI.  

Read more less

A refractometer is used to measure the density of a solution, in our case how much malt sugar is in solution. Featuring both a Brix scale AND a Specific Gravity Scale Our refractometer is unique in that it features both a Brix Scale and a Specific Gravity Scale, the scale most homebrewers use. Why use a Refractometer you ask? Are you tired of not hitting your desired target gravities? Have you tried to cool a large sample so you could use a hydrometer and see what your gravity is? A refractometer allows you take instant gravity readings, with just one drop, at any point during the boil, or even during the run off of the sparge during an all-grain brew. These 'during the process' readings allow you to add more water or boil longer so you can attain exactly the gravity you desire. Refractometer Statistics Our refractometer is hand held with a metal body, flexible eye piece and rubber grip. It features a 0 to 32% Brix scale and from 1.000 to 1.120 on the Specific Gravity Scale with .2% resolution and ATC (Automatic Temperature Compensation). Traditional refractometers without ATC are calibrated to work at 68 degrees Fahrenheit. The ATC function allows you to use the refractometer in an ambient temperature range of 50-86 degrees Fahrenheit (10-30 Celsius.) Because your sample is just one drop, and will quickly adjust to the temperature of the refractometer, the temperature of the sample is irrelevant. Our unit also comes with a manual calibration knob that is secured with a lock nut. To calibrate place one drop of distilled water on the testing platform and adjust to zero if necessary. Getting Geeky about why the Specific Gravity Scale on our unit is accurate Some dual scale refractometers feature a linear scale that multiplies brix by 4 to get Specific Gravity. This is okay at lower gravities up to around 1.040 but the higher your starting gravity goes, the less accurate the conversion is. For example, take a Brix reading of 10, multiply by 4, and you get a SG reading of 1.040 - the accurate SG reading is 1.041. Take a Brix reading of 20, multiply by 4, and you get 1.080 - the accurate conversion is 1.084. We worked with our Refractometer manufacturer to create a unit with a non linear conversion and thus this model can be accurately used for Specific Gravity readings. NOTE - Refractometers will not read correctly if alcohol is present. We have a spreadsheet that can be used to help determine your actual gravity or brix, and this can be found in the "Documents" tab above.

Read more less

Our Sierra Nevada Stout clone is an excellent interpretation of their beautiful, well-rounded American Stout Includes Bravo™ and Cascade hops Estimated ABV: 5.7% Estimated IBUs: 48-53 Makes 5 gallons of finished beer An excellent clone kit of Sierra Nevada's Stout!  This kit is a beautiful example of a well rounded American Stout, utilizing 3 different hops and 7 different malts!  The end result is a bold but smooth malt flavor, backed by about 50 IBUs and an ABV around 5.7%. While most people associate darker beers with colder weather, we like to think of this as a "year-round" stout due to it being so well balanced and easy-drinking! Makes 5 gallons Estimated Original Gravity:1.054-60 SRM (Color Range): 32-35 IBUs: 48-53 Estimated Alcohol Percentage: 5.7% Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”.  For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts.    

Read more less

This Black Butte Porter clone, commercially brewed by Deschutes Brewery in Oregon, is one of the most well-rounded porters out there Includes Bravo™, Cascade, and Tettnanger hops Estimated ABV: 5.3% Estimated IBUs: 22-27 Makes 5 gallons of finished beer Dark Hill Porter is a tribute to one of our favorite west coast porters.  This Black Butte Porter clone, commercially brewed by Deschutes Brewery in Oregon, is one of the most well-rounded porters out there.  Being bittered with Bravo hops helps to initially balance the malty backbone, but that bitterness fades quickly, providing a smooth transition into the complex flavors of four different steeping grains.  This combination of Wheat, Carapils, Crystal 120L, and Chocolate malts create a rounded mouthfeel and chocolate flavor.   If you like dark beers, you're going to love our Dark Hill Porter.  If you don't like dark beers, this just might be the one to change your mind! Makes 5 gallons Estimated Original Gravity:1.050-55 SRM (Color Range): 27 IBUs: 22-27  Estimated Alcohol Percentage: 5.3% Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”.  For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All included steeping grains will come milled.   Liquid Malt Extract (LME) vs. Dried Malt Extract (DME) MoreBeer! recipe kits are offered in both Liquid Malt Extract and Dry Malt Extract so that our customers can choose the format that best suits their needs and brewing style. LME is a viscous liquid, similar in consistency to maple syrup. In addition to being the more affordable option, many brewers find LME easier to handle than dry extract. DME is more condensed and comes in a powder format that is similar to baking flour. Although it’s a little more costly, DME is naturally lighter in color and stays fresher for longer. We highly recommend DME when brewing light colored beers.      

Read more less

The BrewBuilt SlingBlade is an innovative electric heating element designed to promote a rolling boil and even heat distribution. Shaped for Performance and Convenience The SlingBlade's unique crescent-shaped design positions all of the heating power on one side of the kettle, sending thermal energy upward to the surface that then cascades downward on the opposite side of the kettle. This movement creates a dynamic turbulence that evenly distributes heat while creating a vigorous, rolling boil. Other heating elements stick right out into the middle of the kettle or use a full circle design that rings the kettle wall. This can cause an obstruction for immersion chillers or make it difficult to stir without banging into the element. The SlingBlade was designed to avoid these issues. By remaining on one side of the kettle, the element will be out of the way of your immersion chiller, and since the element follows the curvature of the kettle wall, it won't interfere with the flow of wort during whirlpool. Ultra-Low Watt Density An electric element transfers power to your wort by applying heat, but if this heat is too concentrated you will get local heating that is hotter than 212°F. This catalyzes Maillard Reactions, which can lead to darker beer than intended and produce unwanted caramelization. Think of these reactions like roasting a marshmallow. First it gets a light brown, we call this Maillard reactions, a little hotter and it gets a dark brown, we call this caramelization, then it turns black and we call this pyrolysis (burnt or scorched). While all kettles undergo these reactions, an electric element can concentrate more heat into a small area, which can quickly scorch your wort. Our experience is that at 90-watts per square inch recipes need to be modified to account for the element and light beers never come out quite right. The SlingBlade element was designed at 50-watts per square inch to reduce the chance of scorching while still providing a vigorous boil. For even lower watt density, consider the Boil Vigor Controller. Tri-Clamp Connection The SlingBlade installs quickly and easily on any kettle with a T.C. ferrule thanks to the curved, non-circular design. This also makes it a breeze to remove the element for cleaning between uses. The SlingBlade heating elements were designed to fit perfectly with BrewBuilt brewing kettles, but you may find them suitable for other kettles as well. They should be used with T.C. ferrules no longer than 1" in length. For dimensions and recommended minimum kettle diameter, please see the chart below. Features: Made from Incoloy alloy with proprietary coating for long life 1.5" Tri-Clamp connection Unique offset design promotes rolling boil Ultra-Low Watt Density eliminates scorching UL Certified components Specs: 240 Volt L6-30 plug 20 Amp breaker required for 10 & 15 gal element 30 Amp breaker required for 22 & 31 gal element 50-gallon kettle requires 2 x BE538 and 2 x 30 amp circuits SKU Kettle Vol. Wattage Length Radius Min. Kettle Ø BE535 10 gal 3750 13.25" 6.3" 13.78" BE536 15 gal 4500 16.75" 7.3" 15.75" BE537 22 gal 5000 17.25" 8.3" 17.72" BE538 31 gal 5750 19.5" 9.3" 19.69" Please note: Length is measured from the tip of the heating element to the T.C. connection. Radius is measured from the middle of the T.C. connection to the outermost edge of the element's curve. ***In order to avoid injury or death we strongly recommend using a GFCI in any circuit used near water. You can find one here.*** Lowest Price Guarantee, this item has MAP pricing so you can be confident you won't find it for less.

Read more less

Add a 2" tri-clamp port to any tank or lid with this 304 stainless steel weldless bulkhead. Just drill a 45-47 mm hole and tighten this item to your vessel wall. For distilling purposes, this is perfect if you want to fit an extension tube between the BrewZilla / DigiBoil distillation lid and the copper pot or reflux still. Kegland Part Number: KL10979

Read more less

Homebrewers know that proper sanitation techniques are critical for creating high quality homemade beverages. BTF Iodophor, an iodine based sanitizer, is a powerful, broad spectrum antimicrobial product that kills a wide range of bugs that are waiting to infect your fermentation. Unlike acid based sanitizers, BTF Iodophor reliably kills yeast, mold, fungus, bacteria, viruses and blood borne pathogens.  BTF Iodophor offers a low cost per use, is gentler on your hands than other sanitizers, and is very low foaming. If used in the correct dilution (very important) it is a no-rinse sanitizer. It is safe to use on all your brewing equipment such as buckets, kegs, tanks, fermenters, bottles, etc. Even if you frequently use a sanitizer, it’s a good idea to have multiple sanitizers on hand especially when working with wild yeasts and bacteria or as a “change of pace” sanitizer. Directions for 12.5 PPM Brewing Sanitizer Solution: To Make 1.5 Gallons of sanitizer: Mix 1 tsp BTF Iodophor into 1 ½ gallons cool water To Make 5 Gallons of Sanitizer: Mix ½ oz (1 Tablespoon) BTF Iodophor into 5 gallons cool water Allow solution to contact surface for 2 minutes, then air dry. Iodophor Features: Kills yeast, mold, fungus, gram positive bacteria, gram negative bacteria, spore forming bacteria, viruses and blood borne pathogens Use at a rate of 1/2 oz of BTF per 5 gallons Low foaming No-rinse at 12.5 PPM dilution (see above) Non-corrosive and gentle on skin and hands

Read more less

Low Flow Spray Nozzle (6.3 GPH) replacement part for the Anvil Steam Condenser.  

Read more less

Our Signature Series kits offer a selection of crazy, unique beers developed by MoreBeer! customers, associates, and homebrewing legends! Paler in color and more hop-forward than a traditional bock Includes Magnum and Saaz hops Estimated ABV: 6.7% Estimated IBUs: 54-58 Makes 5 gallons of finished beer Gary Glass started homebrewing in 1992, shortly after tasting his first homebrew while attending while attending college at Cal Poly, San Luis Obispo. Gary brews on a home-built HERMS system, and he?s never brewed the same recipe twice and can't brew any recipe without some kind of tweaking. Gary is a BJCP judge who has judge in many competitions including the World Beer Cup and the Great American Beer Festival. Gary holds a Masters Degree in American Diplomacy from the University of Colorado at Boulder. When not homebrewing, he enjoys fly fishing, hiking, and backpacking in the Rocky Mountains. He's also into gardening (his Cascades finally produced a good crop this year!), home improvement projects, and building furniture. Gary lives in Longmont, Colorado with his wife Erin, who fully supports his brewing habit,bought him a conical fermenter and is encouraging him to install taps in their family room. He knows you are jealous. Gary is looking forward to teaching his daughter, who is due in November, to brew someday. Gary enlightens us on how to authentically brew his beer: "This recipe can be brewed as either a Maibock or a Belgian strong ale. The beer was originally brewed as a 10.5 gallon batch split into two carboys with yeast slurry from previously brewed pilsner. To accurately recreate the Belgian strong ale, one should accidentally pour hot wort (due to user error with a counter-flow chiller) onto lager yeast slurry, being sure to thoroughly cook the yeast. Chill, then pitch a vial of Belgian ale yeast. The Maibock came out great, the Belgian strong even better. Of course, if you don't feel like attempting to cook yeast to make this beer, a nice big starter of Belgian ale yeast should do the trick." Sounds great to us! Makes 5 gallons Estimated Original Gravity: 1.067-73 SRM (Color Range): 7 IBUs: 54-58 Estimated Alcohol Percentage: 6.7%     Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”.  For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts.    

Read more less

An extremely tropical Hazy Double IPA with notes of passion fruit, mango, citrus, and pineapple Includes Citra®, El Dorado, and Mosaic® hops Estimated ABV: 8.3% Estimated IBUs: 20 Makes 5 gallons of finished beer We Like Space will convert your carbon-based taste buds into pure energy and beam your consciousness to unknown worlds! The flavor of this high-gravity, fluffy-soft brew is like drinking the nectar from an interstellar pineapple while sitting on a beach of turquoise sand, watching sanguine waves crash and recede against the backdrop of a binary sunset. Travelers beware this quasar quenching Hazy Double IPA. Journey too close and it will trap your senses in orbit, slowly pulling you beyond the event horizon to a point where your desire for beer becomes a singularity. With a 12 oz payload of Citra®, El Dorado, and Mosaic®, We Like Space is one of our most highly-hopped recipe kits. Extremely tropical, with notes of passion fruit, mango, citrus, and pineapple. A heavy helping of Flaked Oats provides a full body and creamy texture, fine-tuned by a late boil addition of maltodextrin. The out-of-this-world graphic is as much of an inside joke as the name itself. After a long brainstorm of potential beer names, the resulting list had an overwhelming theme of sci-fi and astronomical references. When a coworker remarked that the names didn't make sense, noticing that there were no additions of Galaxy or Comet, our intrepid kit developers looked at one another, shrugged, looked back at their coworker and said flatly "We like space." Makes 5 gallons Estimated Original Gravity: 1.080-85 SRM (Color Range): 3-4 IBUs: 20 Estimated Alcohol Percentage: 8.3% Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”.  For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts.     Citra® and Mosaic® are registered trademarks owned by Yakima Chief Hops, LLC.        

Read more less

Due to high demand, some of these items are currently out of stock but available for pre-order. Please check status notes below when selecting a size option to see if it is In Stock or tagged as PreBook. We will automatically ship this to you when we receive more inventory.   Nothing looks quite as nice as beer pouring out of a shiny stainless steel draft tower. These are the same tower kits included with the KOMOS Kegerator. Includes EVABarrier draft tubing and Duotight push-to-connect fittings for easy assembly. These towers can be purchased without faucets, or you can choose your preferred faucets from the add-on options above. The tower is made from 304 brushed stainless steel, making them corrosion resistant while also looking great! Duotight Fittings & EVABarrier Draft Tubing Duotight and EVABarrier have revolutionized how you connect draft line, and our tower kits come standard with both. We love Duotight push-in fittings for their quick connection, reliable seal, and versatility. Setting up and connecting draft line has never been easier -- no more hose clamps or heating water to soften tubing! Each tower comes with Duotight fittings for the tower shanks and for splitting gas lines (double & triple tap only). We recommend adding Duotight fittings to use for your keg connections as well. Depending on whether you'll be serving from homebrew kegs or commercial sanke kegs, you'll need two DUO106 or two DUO104 per line. EVABarrier tubing has been engineered with protection in mind and is both PVC-free and BPA-free. This double walled tubing offers superior protection against oxidation, CO2 loss, and microbial growth. EVA tubing is the future of draft line for professional applications, and now your kegerator will feature the same first-class tubing. Includes: Stainless steel draft tower Stainless steel faucet shank(s) with Duotight tailpieces EVABarrier gas and beverage tubing Draft tower mounting screws Faucet wrench 1-3 Tap Tower Dimensions: 13.4 in. tall (without faucets) 3 in. tower diameter 4.4 in. base diameter 4 Tap Tower Dimensions: 15.75 in. tall (without faucets) 4.5 in. tower diameter Interior mounting holes (does not include bottom collar)   Please note: Perlick Flow Control faucets are not compatible with the included Intertap tower shanks.  

Read more less

Ever wanted to punch out a few more gallons of wort with your 35L BrewZilla? Maybe you wanted more strike water for a super sticky batch. Maybe you get boil overs a lot and would like a bit of extra protection. Now there's a solution! The all new 35L BrewZilla Boiler Extension adds 3.1 gallons of headroom. Turn that 9.2G BrewZilla or DigiMash system into a 12.3G behemoth! The extension kit is also great for distilling! Extend the height of your pot still by attaching one or more boiler extensions. For distillation, we recommend upgrading to the Adjustable Lid Clamps which allow you to dial in the tension for a better seal. If you're struggling to get an airtight seal when using the Distillation Lid, these clamps can help provide more tension. Compatible with Gen 3 / Gen 4 BrewZillas. Please Note: The 110V unit may struggle to bring 10+ gallons of wort to boil. Expect longer heating times and a more gentle boil. An insulating jacket is highly recommended if using the 110V model. You Might Also Need: 35L Extended Malt Pipe 35L Wire Support Ring Recirculation Arm Extension   KegLand Part Number: KL22231  

Read more less

Coming soon! The newest Brewing Systems and accessories from Brewtools are now available for pre-order. Place your order now and we will automatically ship it to you when it's available. The current estimated availability is January 2027. Note: The Brewing System does not include a power cable. For the B180 230V, you will need 2 x NEMA L6-30 power cables (BT1615). See below under You Might Also Need. B180 Brewing System The B180 is a powerful all in one brewing system for serious homebrewers or small breweries. It offers simplicity out of the box, whilst keeping the level expansion possibilities. Indirect heating and included whirlpool setup for maximum yield and fast cooling through the integrated cooling jacket makes cleaning a breeze. The 8" touch display can easily be relocated on the system or externally based on your needs (longer cables are available).  Included whirlpool setup for maximum yield and fast cooling. The included malt pipe has a hinge system to allow tilting the malt pipe to empty spent grains easily. The flow of wort through the FCS Brew Pump is controlled via the patented CleanCore™ 3-Way valve operated from the front.  The combined temperature and level switch sensor keeps you safe by automatically switching off the pump and heating if the water level is low.  With TC side ports, you can easily expand the inputs and outputs of the tank with sparge water, external added cooling with bypass etc. The B180 can be expanded with an external side-by-side mash tun that greatly increases the malt capacity and removes the need for a crane to handle the malt pipe. If you need a powerful and flexible workhorse for high volume homebrewing or a pilot brewery, the B100 or B180 is the perfect match. Indirect heating (10-degree conical bottom) Integrated cooling jacket Included whirlpool setup Included hinged steam hat Tiltable malt pipe Powered by FCS Brewing with an 8" Touch Screen Patented CleanCore™ sanitary 3-way valves 2 side TC ports for expansion Optional external mash tun and counterflow chiller Included temperature sensor for malt pipe Remember to get power cables for your area (purchased separately) You will need 2 x NEMA L6-30 power cables (BT1615).   Drawings / Schematic for setup Available controller ports: 2 CAN bus ports (+24V) 1 High Power CAN bus port for external mash pump 1 external high-level switch (for external mash tun) 1 mash temp sensor input 1 return temp sensor input (optional) In the box: B180 brewing system with malt pipe and steam hat Malt pipe with laser cut filter 1 CleanCore™ 3-way valve Silicone tubing for draining and recirculation Parts and accessories for assembly Mash sensor (probe with 2m cable) Specifications: Batch size: 7.92 - 47.55 gallons Total volume capacity: 52.04 gallons Grain capacity: 99.2 lbs Heating power: 10000W (230V) Watt density: 28.3W/in² Control system: FCS Brewing with 8" IPS touch screen Connectivity: Wi-Fi 2.4 GHz 802.11ax/b/g/n Pump: Brewtools FCS Brew Pump, 7.9 gal/min, 14.7 ft. head Materials: 304 Stainless steel, food grade silicone, EPDM, POK (Polyketone) Valves, fittings, and connections: TC 1.5" (TC34mm for cooling jacket) System height with steam hat: 43.3" Tank dimensions: Ø23.6", height 27.5" (52.3 gallons) Malt pipe dimensions: Ø19.6", height 26" (34.2 gallons) Packing dimensions and weight: 30" x 30" x 49.2" Safety features: Overheat protection, dry-boil protection, liquid detection 5 year manufacturer's warranty Remember: Power cable(s) Connectors for cooling jacket (kit or custom setup) Troll table with crane Steam condenser Models in pictures are prototypes. Changes/improvements may occur. For User Manuals and support, please follow this link to Brewtools Docs.  

Read more less

Thousands of food and beverage professionals and hobbyists have moved from less accurate and less precise optical refractometers to digital Brix measurement. Milwaukee’s MA871 is the ideal tool for winemakers, brewers, fruit and vegetable growers, maple syrup producers, and food producers. The MA871 is fast and easy-to-use with a response time under 2 seconds. Maintenance is a breeze with an easy-to-clean sealed flint glass prism and stainless steel well. The measurement technique and temperature compensation employ methodology recommended in the ICUMSA Methods Book (internationally recognized body for sugar analysis). Summary The Milwaukee digital BRIX refractometer is temperature compensated with a 0 to 85 percent BRIX range and ±0.2 percent accuracy. It is easy to use with simple two button operation and fast with a response time under 2 seconds. Maintenance is a breeze also with an easy-to-clean sealed flint glass prism and stainless steel well. Design Features Fast, accurate results with digital dual level LCD readout Easy measurement with just 2-3 drops of sample needed Results in less than 2 seconds Simple one-point calibration using distilled or deionized water Easy-to-clean stainless steel sample well Meter rated to IP65 as “dust tight” and protected against water jets Battery percent level indicator with automatic shut-off (batteries included) Automatic Temp. Compensation (ATC) Hard plastic case sold separate:  MA800. Range:0 to 85% Brix Resolution:0.1% | 0.1°C (0.1°F) Accuracy:±0.2% Brix | ±0.3°C | ±0.5°F  

Read more less

Get your grain bed evenly mixed and break up dough balls in seconds! Using a handheld electric drill, this heavy-duty stirrer makes mashing in a breeze Made from all stainless steel with a 1/4" hex head to securely attach to your drill This stainless mixer attaches to an electric drill for easy and thorough mixing of your mash. To get the best mash efficiency it is important to break up dough balls (clumps of grain) and ensure that the grain bed is not compacted.  Allowing maximum recirculation through your grain bed will always yield higher extraction / efficiency rates of your brew. Are far as mixing grain goes, this stirrer is much more efficient and less time consuming than a mash paddle or large spoon. Simply attach to your portable electric drill and secure the 1/4" hex head tightly. Overall length is 23.5" with a mixer diameter of 2.75". Highly recommended for all sizes of BrewZillas. KegLand Part Number: KL32247  

Read more less