Search results for "brewing techniques"

BrewTool's solution to filtration of fermented beer. The filter kit is installed directly on the butterfly valve out of the fermenter. The filter kit can also be used for other purposes and can be customized with many accessories and adapters. If the filter clogs, simply remove one Tri Clamp and rinse it in sanitizer without further disassembly. Normal use: Assemble the filter kit and leave in sanitizer Install the filter kit on the fermentation tank valve Purge with Co2 a couple of times and relieve the pressure using the PRV Open the valve, and let the air out using the PRV Connect your ball lock connector to your keg or bottling setup If used on hot side (over 140°F/60°C) we recommend replacing the Poly TC pipe and filter holder with stainless steel equivalents. The filter kit can be doubled up and you can use a coarse and fine filter in combination using simple parts available as accessories. More fittings using M16 threads can be used to extend or if you want to use 34mm TC on the filter output. If you want to use it for TC 34mm or 1.5" we offer adapters to 2". Included parts: Ball lock adapter, 2", Liquid with M16 threads 3 pcs Filter, stainless steel 30mm, 300, 600 and 1000 micron Filter holder made from food grade Nylon (PA), M16 TC 2" to 34mm Tee TC 34mm Manual PRV 3 pcs 2" Tri Clamps 1 pcs 34mm Tri Clamp 2 pcs TC gasket with filter groove (blue) 1 pcs 2" Poly TC pipe, 200mm 2" and 34mm gaskets

Read more less

Chill your beer in the summer and warm your beer in the winter! Temperature control during fermentation is one of the keys to making world class beer at home. It can be difficult to achieve however, often requiring you to have a temperature controlled refrigerator dedicated to fermentation. Now with the FTSs temperature control package and either a Brew Bucket or Chronical,  you can maintain perfect fermenting temps all year.  This particular unit is designed to work specifically with the 14 gallon Brewmaster Edition Brew Bucket. The system is elegant and engineered to be as compact and affordable as possible. The FTSs uses a precision digital temperature controller in combination with a 304 stainless steel immersion chiller. The digital controller constantly monitors your beer’s temperature and will activate the very quiet circulation pump to hold the fermentation temperature at your predetermined set point. You can cold crash or lager too! You supply the chill water source, which can be as simple as ice water in a cooler or as involved as glycol from a chiller’s reservoir. We supply the rest of the system. As long time fellow home brewers, this is a system we know many of you have been dreaming about for a long time: advanced temperature control for the beers you make at an affordable price. Components: Custom lid w/ 304 SS immersion chiller coil Pro grade (super quiet) submersible pump 110-240 v power supply 304 SS weldless lid mounted thermowell Tailored neoprene insulation jacket Digital temperature controller Included vinyl tubing Required from you: Any type of cooler where you will add water and ice, or frozen jugs, to cool. You will submerse the included pump in the water.  To heat you can use a simple aquarium heater to raise the temperature of the water in the cooler A 14 gallon Brewmaster Edition Brew Bucket, FE804 Please Note: This Product is an add on for a 14 gallon Brewmaster Brew Bucket, and DOES NOT INCLUDE the brew bucket itself. 

Read more less

Dual purpose hops popularly used in American styles including Pale Ales and West Coast IPAs Aroma Profile: Citrus, Tropical, Floral, Grapefruit, Grassy, Herbal, Pine Alpha Acids: 4.5 – 7.0% Whole cone hops are often preferred for dry hopping as they maintain contact while floating in the beer and are easier to remove Adding whole cone hops directly to the mash tun is a great way to add flavor and help clarify wort Cascade is the classic American hop that really started the hop craze. Defined by its citrus, and often more specifically, grapefruit flavor it is now sought out around the World. It is a true dual-purpose hop that can be used for bittering, at the end of the boil, or the fermenter. Used in so many craft brewed pale ales, but none more famous than Sierra Nevada's Pale Ale. You cannot go wrong using Cascade in all kinds of American style ales. Whole cone hops are typically the preferred format for dry hopping as they maintain contact with the beer by floating, they are easier to remove than pellets and they add a unique character to the beer. Adding whole hop cones directly to the mash tun is also a great way to add an extra layer of hop flavor and to clarify your wort as it filters through the flowers. Hop Statistics: Alpha Acids: 4.5 – 7.0% Beta Acids: 4.5 – 7.0% Alpha-Beta Ratio: .64 – 1.55 Cohumulone: (% of alpha acids): 33 – 40% Total Oils in mls per 100 grams dried: 0.8 – 1.5 Storage (% alpha acids remaining after 6 months storage at 68° F): 48 - 52% Similar Hop Varieties: Ahtanum®, Centennial, Amarillo® hops     Ahtanum® is a registered trademark owned by Yakima Chief Hops, LLC. Amarillo® is a trademark owned by Virgil Gamache Farms, Inc.  

Read more less

Our Signature Series kits offer a selection of crazy, unique beers developed by MoreBeer! customers, associates, and homebrewing legends! Sweeter than a standard pilsner, but still crisp and refreshing. Guaranteed to satisfy the in-laws Includes 100% Saaz hops Estimated ABV: 4.3% Estimated IBUs: 35-39 Makes 5 gallons of finished beer Charlie Essers (AKA Push Eject) has been a longtime friend of MoreBeer, The Brewing Network, and homebrewers in general. Dubbed "one of the nicest guys in homebrewing" by those who know him, Push wanted us to have this recipe that he brews whenever his father-in-law comes for a visit. Push says: "My family has been supportive of all the brewing gadgets and scattered projects including my "dark-beer-phobic" father-in-law. This recipe is an Americanized pilsner that I have evolved for him over the years. Sweeter than a standard pilsner, but still crisp and refreshing, I can't keep this around long in the Summer months." Push began brewing in 1999 after buying a starter homebrew kit as a bad joke for a friend who earned a DUI and getting one for himself as well on impulse at the register. After going all grain in 2002, it was clear that automation was a necessity in his process, and his love of brewing gadgets was born. His first stand was designed and built in 2003 and his first Wort-O-Matic control panel in 2006. These led to the launch of wortomatic.com and a close relationship with MoreBeer! and The Brewing Network. Try Push's beer out and let him know what you think - Hopefully it keeps your father-in-law happy, too! Makes 5 gallons Estimated Original Gravity: 1.042-46 SRM (Color Range): 4-5 IBUs: 35-39 Estimated Alcohol Percentage: 4.2-4.4% Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”.  For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts.    

Read more less

Our Signature Series kits offer a selection of crazy, unique beers developed by MoreBeer! customers, associates, and homebrewing legends! As the name implies, this IPA absolutely explodes with citrusy hop flavors and aromas Includes Magnum, Columbus, Citra®, Centennial, and Falconer's Flight hops Estimated ABV: 7.3% Estimated IBUs: 55-60 Makes 5 gallons of finished beer Brought to us by Nate Smith, this IPA truly is a hop bomb! With almost 10oz. of hops in a 5 gallon batch, this is one that hop-heads definitely need to try. Falconer's Flight, Citra®, Magnum, Columbus and Centennial all play a role in the clean bitterness and amazing hop aroma and flavor that you get out of this IPA. Nate is a participant in the Brewing Network's Sunday Session podcast, an active member of D.O.Z.E. (Diablo Order of Zymiracle Enthusiasts) Homebrew Club, and has been homebrewing for over 14 years. Needless to say, Nate's familiar with the scene! Nate's Recommendations on the Citrus Bomb IPA: Use WLP001 (with a starter) or WY1056 yeast. Plan on an 18-20 day fermentation: 10 Days at 65F, then raise to 68F on the 10th.  Add your dry hops 5 days later, and rack 3-5 days after that.  *NOTE* Fining with biofine is recommended! Makes 5 gallons Estimated Original Gravity: 1.066-71 SRM (Color Range): 7 IBUs: 55-60 Estimated Alcohol Percentage: 7.3%   Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”.  For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts.   Citra® is a registered trademark owned by Yakima Chief Hops, LLC.    

Read more less

Add this neoprene jacket to your Gen 4 BrewZilla to speed up heating! Heating is 10% faster and heat loss from the boiler is reduced by 50% Remove the jacket after the boil to speed up chilling Thick, insulating neoprene is secured to the boiler body with a sewn-on hook and loop fastener strap Sparge arm sleeve included to reduce heat loss during mash recirculation Add some insulation to your BrewZilla to get better boils! This neoprene jacket will help keep the heat in for quicker and more vigorous boils. Slap it on to speed up heating; take it off to speed up chilling. Also includes a neoprene sleeve for the recirculation arm to reduce heat loss during the mash. This jacket will fit Gen 4 BrewZilla models. It is not compatible with older generations of BrewZillas and DigiBoils due to where the cutouts on the jacket are located. Features: 10% faster heat up time 50% less heat loss from boiler Fits the 35L BrewZilla Gen 4 Made from 8 mm thick neoprene which is easy to wash after use KegLand Part Number: KL24365  

Read more less

This ale will deliver a smooth blend of Cascade floral character and biterness, tempered by a slight sweetness from the honey Includes 100% Cascade hops Estimated ABV: 6% Estimated IBUs: 40 Makes 5 gallons of finished beer In 2011, the White House home brewed beer for the first time in, well, perhaps centuries! We were super were excited when a MoreBeer! customer first submitted his freedom of information act request for the White House homebrew recipes. We were a little surprised, and we'll say it - let down - when we saw the actual recipes. One MoreBeer! staffer blurted out "Whoa...this seems like beer that Prince Harry should be brewing." English malt extract, English hops, and even an English yeast strain were used; so the only thing truly American was the honey! It seems that we were not the only beer lovers to pick up on this. So while we really, really love English beers as much as the next homebrewer, we think the Commander In Chief of America and his White House Brewmasters should be using fresh ingredients from well...America. Since we were tweaking the recipe towards this side of the pond, we decided we could also help educate the White House staff on their yeast selection. Yes dry yeast has gotten better but since its for the White House and all, we think they can spring for liquid yeast...and is there any better choice for this recipe than Wyeast 1056 AMERICAN Ale or White Labs 001 California Ale?? Not really. In fact, just queue up the star spangled banner, turn on the football game, and throw some hot dogs on the grill because we are starting to feel pretty patriotic here. So while we send this kit along with our friendly suggestions back to the White House, YOU can make the exact same beer at home. That way if you are in a diner somewhere on the campaign trail and the president pulls up you can whip out a bottle of the 'Honey Pale the White House Should Be Making' or the 'Honey Porter the White House Should Be Making' and enlighten the Top Dog, homebrewer style. This American Honey Pale Ale uses all American ingredients, including: White Wheat, Crystal 15L, and 2-Row grown in the USA Cascade hops California Wildflower Honey Truly a classic American Pale Ale recipe!  This ale will deliver a smooth blend of Cascade floral character and biterness, tempered by a slight sweetness from the honey.  The California Wildflower Honey delivers just enough residual sweetness to result in an amazingly balanced, hoppily delicious pale ale. Makes 5 gallons Estimated Original Gravity: 1.054-59 SRM (Color Range): 8 IBUs: 40 Estimated Alcohol Percentage: 6%   Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”.  For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts.    

Read more less

Increased Malt Profile & Clarity: Features a balanced chloride-to-calcium ratio that enhances body and sweetness in amber and golden ales while supporting essential yeast health for a crisp, clear finish. Instant Precision: Effortlessly transforms RO or distilled water into a reliable, repeatable brewing base. Optimized Chemistry: Precisely balances mash pH and mineral content to unlock your beer's full flavor potential. Expertly Formulated: Developed with brewing authority Colin Kaminski for style-accurate chemistry and optimal mash pH. All-Grain Optimized: Engineered specifically for all-grain mashing to maximize enzymatic activity and mash efficiency. Instant Water™ is not recommended for extract brewing. A versatile formulation for golden, amber, and malt-forward ales. Moderate chloride enhances body and malt sweetness, while balanced calcium supports yeast health and clarity. Ideal for blonde ales, Scottish ales, or any brew where malt flavor should lead without heaviness. Elevate your home brewing with the CellarScience Instant Water™ Salt Pack — designed in collaboration with Colin Kaminski, co-author of Water: A Comprehensive Guide for Brewers. Each expertly crafted blend of essential salts and minerals transforms reverse osmosis (RO), deionized (DI), or distilled water into an ideal base for brewing. Every formulation is precisely balanced to optimize water chemistry for its intended beer style, helping your brew reach its full flavor potential with style-accurate mineral content and optimized mash pH. Engineered for precision and ease of use, CellarScience Instant Water™ Salt Packs simplify the complex process of water adjustment, providing a reliable and repeatable solution. Importance of Mash pH Proper mash pH is critical to brewing performance and finished beer quality. CellarScience Instant Water™ formulations are designed to place mash pH into the optimal range for each beer style. Improves brewhouse efficiency by supporting optimal enzyme activity during starch conversion Shapes hop flavor and balance by influencing bitterness, smoothness, and aroma expression Enhances clarity and stability through improved protein coagulation and yeast performance With properly conditioned water, you’ll unlock better fermentation, enhanced enzyme activity, and a cleaner, more expressive finish that allows your beer’s true character to shine. Designed to work with: Reverse osmosis (RO), deionized (DI), or distilled water Each pack treats: 6 gallons (23 L) of brewing water For larger batches, add an additional 2 g per gallon Instructions  Use only with reverse osmosis (RO), deionized (DI), or distilled water. Add the full contents of this pack to 6 gallons (23 L) of brewing water before mashing. Stir until dissolved. Mash in as usual — no additional acid or salt adjustments are typically required. Proceed with your normal brewing process. Note: These salts are designed to set mash pH without acid additions. Because malt acidity varies, you may wish to verify your mash pH and make small corrections if needed, though this is rarely necessary. Dextrose is used in trace amounts as a processing aid for blend consistency and flow and does not affect fermentation or flavor.  

Read more less

Wide mouth carboys are the easiest glass fermenter to clean with plenty of room to get your arm inside to scrub Add bagged flavoring additions and remove them freely when finished—this can be nearly impossible with traditional narrow neck glass carboys Watch fermentation activity as it's happening! The ultimate advantage of translucent glass or plastic fermenters Ported lid with removable cap sized for a #5 stopper & airlock Carrying harness included for easier handling Glass carboys have been a staple of the brewing and winemaking world for generations, but traditional tight neck carboys aren't without their limitations. Standard glass carboys can be difficult to clean after fermentation and require a siphon or racking cane to transfer liquid out. The wide mouth carboy is extremely easy to clean—simply removing the lid allows you to get your hand or arm all the way inside to scrub away stubborn sediment. And with a convenient spigot at the bottom, you can transfer liquid out of the vessel with ease. Each carboy comes with a carrying harness. See below for optional stainless steel spigots. Features: Gasketed lid for tight seal Included carrying harness Ported lid ready for #5 stopper & airlock Plastic spigot with 3/8" OD barb (tapers from 10-12mm) 20mm (0.78") diameter spigot hole 165mm (6.5") lid opening Continuous thread, 5mm pitch Please note: The carrying harness should not be used to move the vessel when full. The airlock lid is primarily recommended for short fermentations.

Read more less

7.9 °L - Great Western - Produced in the traditional European manner of 'stewing' germination then kilning at high temperatures. Emphasis on higher-protein 2-Row barleys, to achieve high levels of protein solubilization and color formation. In some classic beer styles such as continental lagers, the use of Munich malt is usually essential if the brewer is to achieve the required malt character and mouthfeel. Malt Specification: Moisture % - max. 4.4 Extract fine % dm - min. 77 Color °L - 7.9 Protein % dm - max. 12  

Read more less

West Coast Pilsner combines the crisp, refreshing crushability of a Pilsner with the hoppy wallop of a West Coast IPA Includes Citra®, Amarillo®, Riwaka, and Mosaic® hops Estimated ABV: 5.4% Estimated IBUs: 30 Makes 5 gallons of finished beer The lines between clean, crushable lagers and hop-forward IPAs continue to blur at breweries and taprooms across the country. Whether it’s a hoppy lager or a Cold IPA that’s flying out of the tap handle, one thing is certain: craft beer drinkers love the combination of a crisp, refreshing lager with the heaps of new world hop character that you’d expect from a modern IPA. Pacific Coast Pilsner is our take on one of the styles within this ever-rising sub category of beers—the West Coast Pilsner. The malt bill consists of nearly 100% pilsner malt extract for a super-clean base and bright straw color in the glass. And now for the West Coast spin. Rather than a dash of noble hops, this recipe includes a healthy addition of Pacific Northwest and Southern Hemisphere hops in the boil, whirlpool, and dry hopping. The end result is a true “best of both worlds” beer. Light and easy-drinking, not too bitter, and teeming with citrusy, tropical hop character. Makes 5 gallons Estimated Original Gravity:1.045-50 SRM (Color Range): 3 IBUs: 30 Estimated Alcohol Percentage: 5.4%   Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”.  For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All included steeping grains will come milled. Liquid Malt Extract (LME) vs. Dried Malt Extract (DME) MoreBeer! recipe kits are offered in both Liquid Malt Extract and Dry Malt Extract so that our customers can choose the format that best suits their needs and brewing style. LME is a viscous liquid, similar in consistency to maple syrup. In addition to being the more affordable option, many brewers find LME easier to handle than dry extract. DME is more condensed and comes in a powder format that is similar to baking flour. Although it’s a little more costly, DME is naturally lighter in color and stays fresher for longer. We highly recommend DME when brewing light colored beers. Citra® and Mosaic® are registered trademarks owned by Yakima Chief Hops, LLC. Amarillo® is a registered trademark owned by Virgil Gamache Farms, Inc.  

Read more less

Highly drinkable, malt-forward beer with a slight toasty nose from Munich malt Includes Northern Brewer hops Estimated ABV: 8% Estimated IBUs: 19-22 Makes 5 gallons of finished beer The "Original Gatoraid", Bière de Garde was said to give the French and Belgian farmer a much needed boost of energy during the day, due to the low alcohol and relatively high residual sugar content. Our version has a bit more malt than tradition dictates, but we think you will find this beer highly drinkable. The malt is the focus of this style of beer, with a slight toasty nose from the Munich. A yeasty character is not uncommon, and is achieved by an extended period of contact with the yeast bed – some commercial breweries go for up to six weeks! This should be fermented at 64°F. Makes 5 gallons Estimated Original Gravity: 1.080-84 SRM (Color Range): 15 IBUs: 19-22 Estimated Alcohol Percentage: 8% Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”.  For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts.    

Read more less

Get to boil faster and increase boil vigor by retaining heat! Manage steam by turning it back into liquid that can later be used for cleaning/sanitizing Avoid the sticky residue that boiling wort can leave on your walls and ceiling Reduce the power consumption during the boil with your BrewZilla or DigiBoil Perfect accessory for indoor brewers! No need to install a special Range Hood to manage steam Made with the apartment and basement brewer in mind, this steam condenser set made from high quality 304 stainless steel will help you manage steam and condensation during the boil. Assembles in minutes and can be used with the BrewZilla or DigiBoil with the proper Distillation Lid and 2" T.C. weldless bulkhead. This setup will reduce heat loss, meaning you'll get to boil faster and use less energy overall to maintain a rolling boil. When it's time to add hops, yeast nutrients, or other additions, simply remove the tri-clamp end cap and drop them in. (Use gloves, it will be hot!). With the new Pro Sight Glass Distillation Lid, the condenser can be attached directly to the 35L unit's 2" T.C. ferrule or to the 65L unit's 4" T.C. ferrule using a 4" x 2" T.C. reducer. The Pro Distillation Lid also features a 3" sight glass disc that can be removed to address foaming issues or to add hops or other boil additions. If you've brewed indoors before, you're probably familiar with how sticky the evaporation coming off the boiling wort can be. The gummy layer of film it can leave behind on your painted walls and ceiling is no fun to clean up. And if you've been considering how to incorporate a range hood in your brewery to deal with the steam, now there's no need! Simply attach the Steam Condenser Set and run your kitchen tap or garden hose to the Duotight-compatible inlet. From the inlet, water will enter the column via a special spray head which can condense 0.42 gal (1.6 L) per minute while connected to 100 psi mains water. You'll find that a super-fast flow rate isn't necessary to cool boiling steam into liquid. Unlike the distillation process where the distillate needs to be under a certain temperature so that ethanol doesn't evaporate from the liquid at a high rate, with boiling wort you just need enough flow to form the steam back into liquid. Simple! After the steam is reformed into liquid, it will drain out of the bottom barb where you can install 3/8" ID silicone tubing. Recapture that water in a collection vessel and save it for cleaning and sanitizing! Once again, be aware that the water coming out will be very hot. Caution: You will need to remove the Steam Condenser when you reach boil to manage the hot break and ensure you don't have a boil over when you reach boiling temperatures. Once you've completed that step, you can reattach the Condenser and leave it in place for the remainder of the boil. Warning: It is important that the output tube for this steam condenser is open to atmosphere. This will allow the condensed steam to exit freely. DO NOT put a valve on the liquid output or restrict the condensed steam in any way as this may cause your brewery to develop vacuum and implode or explode. DO NOT immerse the tube for the condensed steam in water. The outlet hose must be open to atmosphere and the drips of condensed steam must drip into your collection bucket freely. You Will Also Need: Tri-Clamp Distillation Lid OR Standard Distillation Lid for 35L or 65L BrewZilla / DigiBoil With 2" T.C. Weldless Bulkhead (H707) OR Pro Distillation Lid for 35L or 65L BrewZilla / DigiBoil 35L Lid connects directly 65L Lid requires 4" x 2" TC Reducer 6.35 mm Monotight Adapter (or you can clamp directly to the inlet) 3/8" ID silicone tubing for the outlet Heat resistant brewing gloves Kit Includes: 5 x 2" Tri-Clamps 5 x 2" Tri-Clamp Silicone Seals 1 x 13.7" (340 mm) Long 2" T.C. Tee 1 x 7.8" (200 mm) Wide 2" T.C. Tee 1 x 2" T.C. End Cap 1 x 2" T.C. to 6.35 mm Duotight elbow cap with elongated spray head mister 1 x 2" T.C. x 0.47" (12 mm) Barb – Suitable for 3/8" (10 mm) ID Silicone tubing Some of these fittings are not sold separately NOTE: The kit does not include the Duotight adapter and garden hose QD shown in the example photo. The text in the photo showing the Duotight compatible inlet elbow states 6.5 mm; it is actually 6.35 mm. KegLand Part Number: KL22842

Read more less

At just under 5%, we like to think of this beer as a hop lover's dream. A truly sessionable IPA overflowing with hop character Includes Warrior®, Centennial, and Simcoe® hops Estimated ABV: 5% Estimated IBUs: 58-62 Makes 5 gallons of finished beer If you're looking for a new session IPA to obsess over, look no further!  We recently changed this recipe slightly, making all finishing hops Centennial (rather than a blend between Centennial and HBC-342).  We made sure to keep the Simcoe® dry hop though, as we felt this really brought a "pop" to the aroma!   While the general rule of thumb has been "one or two IPAs and you're feeling it", at just under 5%, we like to think of this beer as a hop lovers dream.  The type of IPA that you can open up at noon, get the grill going, and forget worrying about how you're going to feel after drinking 8% IPAs for a few hours!  (Yes, we know that feeling too...) A half pound of corn sugar helps this one finish out nice and dry, while a small amount of acidulated malt will help make those hops pop. The clean bitterness of Warrior® balances perfectly with a slightly sweet malt profile, all topped off with a white, frothy head thanks to the wheat malt. So what are you waiting for?!  Order your kit today and let the obsession begin! Makes 5 gallons Estimated Original Gravity: 1.048-1.052 SRM (Color Range): 5-6 IBUs: 58-62 Estimated Alcohol Percentage: 5%   Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”.  For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts.     Simcoe® and Warrior® are registered trademarks owned by Yakima Chief Hops, LLC.  

Read more less

The Flash Brewing® Equipment Kit was made for beginner brewers who might not already own some of the essential equipment needed to brew Flash Brewing® recipe kits. Flash Brews can be fermented in any wide mouth 3-gallon fermenter. The 3-gallon Fermonster fermenter is a perfect choice as the wide mouth allows you to easily pour in the ingredients. Includes: 3 gal Fermonster Fermenter & Spigot Airlock & Stopper Bottle Filler & Tubing Fermenter Lid Opener Star San Sanitzier Instructions

Read more less

BrewBuilt CIP Spray Ball for use with X-Series Uni Conicals or any stainless steel fermenter with 1.5" tri-clamp fittings. The head emits a 360° fan spray that cleans above and below the spinning ball. The sharp spray easily removes soil inside your tank. The long neck design allows the spray ball to reach through tall fittings and ferrules. With a welded 90° elbow inlet, you won't have any trouble with kinked hosing slowing your pump flow and lowering the spray ball's performance. A pump capable of 30-45 psi and 11 GPM is recommended for this product to provide a high pressure cleaning radius of 3.6 ft. When used with BrewBuilt conicals, 7 GPM is enough to coat the full interior of the fermenter, but longer CIP runs might be required to fully breakdown stubborn solid deposits.

Read more less

Our Signature Series kits offer a selection of crazy, unique beers developed by MoreBeer! customers, associates, and homebrewing legends! This unique beer recipe has a similar flavor to a Black and Tan but with a noticeable honey character Includes Cascade and Northern Brewer hops Estimated ABV: 5.3% Estimated IBUs: 30-34 Makes 5 gallons of finished beer Jason, who recently graduated from the American Brewers Guild, now teaches our beginning and advanced brewing classes held every month in Concord, Ca. Jason use to brew up Jim Rossi's Honey-Pale and our B3 Stout and mix them together out of the tap 50/50. Jason decided to take it one step further and started brewing them together. He says "It is a like a Black and Tan" with a honey flavor of course. The beer does not taste like a true stout but is very far from being a Pale Ale. The continually positive response of "wow" from friends and other MoreBeer! customers prompted us to make his unique combination as his own kit, Honey-Stout. Thank you Jason for reminding us that when it comes to beer flavor, there are no rules. Jason recommends English yeast, WLP002. Makes 5 gallons Estimated Original Gravity: 1.053-58 SRM (Color Range): 24 IBUs: 30-34 Estimated Alcohol Percentage: 5.3% Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”.  For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts.    

Read more less

Elevate your brewing game with the 220V 26 Gallon Gen 4 BrewZilla. This cutting-edge system combines more power & capcity with innovative features like wireless connectivity via WiFi & Bluetooth, allowing you to heat faster while you control and monitor your brew day, ensuring precision, convenience, and exceptional beer batch after batch!   WiFi / Bluetooth enabled RAPT Controller tracks your brewday and automatically uploads detailed information to the RAPT portal The top mounted RAPT Controller can be tilted upward for easy viewing, or detached from the unit to mount it on the wall or placed on your bench Mirror polished dome shaped bottom with center drain — get every last bit of wort into your fermenter while the perforated bottom screen filters out 95% of hot break and hop matter Perforated bottom on the newly designed malt pipe allows for improved mash recirculation flow without sacrificing efficiency Element power percentage can be adjusted via the RAPT Controller. Go full power to heat up quickly, or dial it down so you don’t overshoot your strike water temp The built-in pump is plumbed to both the recirculation and arm and the bottom ball valve. Recirculate wort during your mash, then close the recirculation valve and pump wort to your fermenter via the bottom valve Pair with the RAPT-enabled Bluetooth Thermometer, allowing your BrewZilla to calculate a core mash temperature reading and more accurately control temperatures and mash steps More RAPT-enabled accessories are coming, and future firmware updates can be downloaded to the RAPT Controller itself over the internet WiFi/Bluetooth Enabled RAPT Controller The RAPT Controller is mounted to the top of the boiler body, allowing for easy operation when you have the unit set on the ground. The controller can be tilted upwards to give you an even better view, or it can be removed from the BrewZilla entirely if you’d prefer to mount the controller on your wall or lay it down on a workbench. From the controller, you’ll orchestrate your entire brew day. Program mash steps, dial in element power, and operate the integrated pump all from one screen. But the RAPT Controller is much more than a beautiful, full-color display switch board. Once synced to the RAPT Portal, you’ll be able to track, record and monitor your brews online. No need for handwriting notes or punching brew day details into your phone – all of the data from your brew is automatically logged to your portal profile. This information doesn’t just include your mash profile; it also captures detailed information about your element power and pump activity, opening the door for very precise repeatability. And the RAPT Portal isn’t just a digital archive for your brew days. With your BrewZilla powered on, you can control your brewery from virtually anywhere using your phone’s web browser. Not sure when you’ll be home from work or your kid’s ball game going into extra innings? No problem! Before you head out, simply log into the RAPT Portal from your phone and tell the BrewZilla to start heating your strike water. Along with remote control, the portal enables you to program alarms and push notifications for all of your boil additions. We’ve all been caught up with a side task and failed to throw in that yeast nutrient or clarifying agent at the end of the boil, but the BrewZilla has the back of even the most forgetful brewer! But wait, there’s more! In addition to WiFi connectivity, the RAPT Controller is also a Bluetooth gateway device. KegLand is currently developing various Bluetooth devices such as the Bluetooth Beacon Thermometer and other sensors which will be compatible with your brewery upon release. The RAPT Controller is able to receive information from Bluetooth Low Energy (BLE) devices, adjusting its processes based on this new stream of information while simultaneously logging it to your RAPT Portal. With the Bluetooth Beacon Thermometer, for example, you’ll be able to feed temperature readings from the top of your mash bed to the controller. The controller will then compare this reading with the main temp probe reading at the base of the kettle and adjust element cycling based on these combined readings. Finally, the RAPT Controller WiFi connectivity allows you to update the controller’s firmware with a single click. Take advantage of new features and accessories as soon as they become available by simply keeping your BrewZilla connected to your local WiFi network. And again, the WiFi is already built-in! No need to come back for an expensive add-on accessory down the road. Concave Base with Center Draining Leave no wort behind! The concave base with center drain means you’ll be able to extract every last drop of wort to your fermenter. If you’ve brewed in a traditional flat bottom kettle, this center drain may be a bit perplexing at first. Many brewers are used to whirlpooling after the boil to pull hop matter into the center of the kettle, then transfer out using a pick-up tube that pulls from the kettle wall in order to avoid sucking up the solids. But fear not! One of the key features of the BrewZilla is the false bottom protection screen. This screen avoids the need for doing a whirlpool, filtering wort as it transfers and blocking more than 95% of hops and hot break from getting sucked into the pump. This not only prevents blocked pump issues, it also increases the efficiency of your brewhouse by eliminating kettle loss from wort that may have otherwise been left behind. Ultra Low Watt Density Elements The concave base on the BrewZilla also allowed for larger heating elements with significantly lower watt density than other breweries. When a lot of energy is coming off of a small element, the local temperature near the element can be so high that it scorches the wort and causes caramelization. Lower watt density essentially means you can produce lighter color beers that would otherwise have fallen victim to caramelization effect. It also reduces that chance of boilovers and reduces stress on the elements which extends their life expectancy. Heat Exchanger Dish The 100L BrewZilla comes standard with the Heat Exchanger Dish which redirects the flow of wort so that it spends more time exposed to the heating elements before reaching the center drain at the bottom of the kettle and being recirculated. Due to the concave bottom and central draining hole on the Gen 4 BrewZilla, recirculating wort will pass through the malt pipe and then down through the boiler false bottom following the path of least resistance. This can cause wort to make a B-line for the drainage hole and reduce the wort's exposure to the unit's heating elements. With the HED installed, wort will be directed to the edge of the BrewZilla base and pass over the elements for a longer period and reduce the time needed to heat to your set temperature. An optional accessory for the smaller units, but included as standard on the 100L BrewZilla. Easy Access Built-In Pump The built-in pump allows you to recirculate your wort during the mash for improved efficiency and more even temperature distribution. But it can also be used to transfer your wort from kettle to fermenter rather than relying on a gravity feed, and with the optional CIP Rotar, you can used the pump to clean your BrewZilla (or fermenter) after every use. During your brew day you’ll be able to control the pump from the RAPT Controller with a dedicated button for turning the pump on and off. Another feature you’ll find on the controller is adjusting the pump flow. This doesn’t control the actual volume of the flow (you can do that from the ball valve located on the recirculation arm), but rather cycles the pump on and off automatically based on your setting. At 100%, the pump remains on continuously. But at 80%, the pump will cycle to be on 80% of the time and off 20% of the time. This may not be a feature that every brewer thinks they need, but it’s an excellent way to avoid running the pump dry accidentally, as the time the pump is off allows recirculating wort to filter through the grain bed and back into the pump inlet. If you flip over the boiler, you’ll find the magnetic drive pump and all the plumbing is right at your fingertips. This means you don’t have to disassemble the base in order to access the pump for cleaning or maintenance if required. It also means the plumbing can be changed more easily too. For instance, the unit comes as standard with the plumbing from the pump feeding both the recirculation arm and the transfer valve, but you change this so the tap outlet bypasses the pump if you prefer. MoreBeer!'s Final Word We’ve been selling all-in-one brewing systems ever since they first hit the market, and we have to say that the Gen 4 BrewZilla is not only the most feature-packed unit ever made, it’s also offered at an incredibly competitive price point when compared to other systems. You’ll get all of the cutting edge Bluetooth technology you’d get with the Grainfather and at an exceptionally lower price tag. Plus, you get the WiFi capabilities as standard, rather than as a $100 add-on accessory. When it comes to mash recirculation, that’s yet another built-in feature on the BrewZilla, and the pump can also be used for transferring and CIP cleaning. The Foundry has a great starting price, but if you want to unlock its full potential, you’ll need to spend another $100 for the recirculation pump kit. What’s more, no other system in the same ‘weight class’ has the same grain capacity. And if the standard capacity isn’t quite enough, the BrewZilla can be easily upgraded with a Boiler Body Extension Kit and Extended Malt Pipe. When you purchase the BrewZilla, you can feel confident that you’re investing in a top shelf system and all of the critical features you’re expecting will be included. Features: Gen 4.1 Stainless steel construction 26.4 gallon total capacity with a finished beer output of 15-20 gallons WiFi/Bluetooth Enabled RAPT digital temperature controller Automatic step mashing with 6 programmable stages 220-240V power NEMA L6-30P Plug Requires NEMA L6-30R receptacle Draws 30 amps. Ask your electrician if you need to oversize the circuit (3) 2,200W heating elements Stainless steel 1/2" ball valve for gravity draining or transferring via pump Heat exchanger dish included Stainless steel malt pipe/basket Stamped in volume markers Glass lid Adjustable lid clamps (do not use with glass lid in place - see below) Magnetic drive pump for recirculation, transfers, and cleaning Recirculation arm PPSU sight glass Bottom handle for easy lifting and pouring Rubber feet Temperature reads in °F or °C Approximately 36" H (with recirculation arm) x 20.5" D (boiler only) Recommended max. grain bill: 41.5 lbs AlcoEngine Still ready with the purchase of a Distillation Lid Pump Specs: Max Capacity: 5 gal/min Max Head: 11.15 ft. Voltage: 220–240V-AC Frequency: 50–60Hz Power: 25 watts Input/Output: 13mm barb You Will Need: 2' of H985 1/2" ID Silicone tubing for sparging and draining. Wort Chiller for cooling We recommend either of the below counterflow chillers Copper Counterflow Chiller (WC130) BrewBuilt® Stainless Tri-Clamp Counterflow Chiller (WC140)   KegLand Part Number: KL32803 Please note: due to patent restrictions in the United States, the malt pipe has been redesigned with one set of bottom feet. This model does not include the "two stage" malt pipe as advertised by KegLand and featured in previous MoreBeer! YouTube videos. Please Note: When removing the malt pipe to drain after mashing, it is important to do so slowly rather than in one swift pull. If the malt pipe is removed all at once when it is full of wort, it is possible for the draining wort to spray out and over the rim of the brewery through the perforated bottom. Remove the malt pipe slowly so that some of the wort can drain out before it is fully removed and set on its bottom feet. This can be done by hand on the 35L unit, but for the 65L and 100L units we highly recommend using the Pulley System for removing the malt pipe. Warning: Do not engage the adjustable lid clamps when brewing with the BrewZilla's standard glass lid. The clamps are only intended to be used with distillation lids or other metal accessories. With too much tension, it is possible for the lid clamps to break the glass lid when engaged. Warning: If you are going to use an extension cord with the BrewZilla, you must ensure that the cord is the correct gauge and properly rated to suit the power requirements of your brewery. See the reference chart below for the recommended gauge based on your unit and the length of cord you wish to use.   35L (110V) 35L (220V) 65L (220V) 100L (220V) 10 ft. 14 Gauge 14 Gauge 12 Gauge 10 Gauge 25 ft. 14 Gauge 14 Gauge 12 Gauge 10 Gauge 50 ft. 12 Gauge 12 Gauge 10 Gauge 8 Gauge   RAPT Gen 4 BrewZilla | User Manual

Read more less

Flash Brewing® Kits from MoreBeer!® require only 10 minutes to brew. Just mix and ferment. The Flash Pilsner is an homage to the classic Pilsner style, with a white, frothy head that laces beautifully on the glass Flavored with Hallertau Mittelfrüh pellet hops Estimated ABV: 5.8% Estimated IBUs: 30 Makes 5 gallons of finished beer Pilsner Flash Brewing® KitThe Flash Pilsner is an homage to the classic Pilsner style, with a white, frothy head that laces beautifully on the glass. Its malt blend delivers a smooth malt profile with a subtle sweetness that balances perfectly with the crisp, clean finish. Hallertau Mittelfrüh hops contribute delicate floral and spicy aromas, while Flash Yeast™ ensures a clean fermentation. With Flash Yeast doing the work, this Pilsner can be fermented at a wide temperature range of 65°F to 85°F. For the best clarity and smoothness, lagering is recommended at 40°F. Fermenting at around 70°F, this recipe finishes fermentation more quickly than a standard lager. This easy-drinking, refreshing beer can be ready to enjoy in just a few days. For the best clarity and smoothness, storing cold (lagering) for a couple weeks is recommended. Flash Brewing® KitsIntroducing MoreBeer!'s Flash Brewing® Kits! Designed for both novice and seasoned homebrewers, these innovative recipe kits allow you to simply mix the ingredients with water and add yeast for fermentation. This streamlined process not only saves you valuable time but also simplifies brewing without sacrificing flavor. Say hello to a faster, easier way to craft exceptional beer at home. Typically, brewing requires you to boil your malt and hops for one hour, followed by another hour for cooling. Flash Brewing® eliminates the need to boil. Our Flash Brewing® malt recipes have been boiled and whirlpooled before they are dried. We then use a HopBite™ shot for bitterness combined with a mix of traditional hop pellets for flavor. Flash Yeast™ starts quickly and consistently produces clean beer that lets the malt and hops shine. The result is a high-quality beer that will absolutely surprise you. If you want to read more about the development of Flash Brewing® at MoreBeer! or have more questions please read our Frequently Asked Questions. Equipment Required for Flash Brewing®Flash Brews can be fermented in any wide mouth 6 or 7-gallon fermenter you already own. We suggest a wide mouth fermenter so you can easily pour in the ingredients. The 7-gallon Fermonster fermenter is a perfect choice. If you are new to brewing and need a fermentation kit, See related product. Includes: Pilsner Flash Malt™: 6 lbs Hallertau Mittelfrüh Pellet Hops: 1 oz HopBite™: 30 IBU Shot Flash Yeast™ Flash Brewing® Instructions  

Read more less

Columbus, or CTZ (Columbus, Tomahawk, and Zeus), is a high alpha varietal with a neutral bitterness and intense aroma. A true dual-purpose hop that works very well for bittering, but shines just as easily as a late addition. CTZ hops have an earthy, spicy character that is great for bittering. But when used as an aroma addition, you'll find more floral and citrus notes come out that can be very pungent. Columbus is a perfect choice for IPAs, Pales, Imperial Ales, Hazys, Stouts, and Lagers. Hop Statistics: Alpha Acids: 14.0 – 16.0% Beta Acids: 4.0 – 5.5% Alpha-Beta Ratio: 2.55 – 4 Cohumulone: (% of alpha acids): 30 – 35% Total Oils in mls per 100 grams dried: 1.5 – 2.0 Similar Hop Varieties: Chinook, Nugget, Millennium

Read more less

Flash Brewing® Kits from MoreBeer!® require only 10 minutes to brew. Just mix and ferment. An explosion of aroma and flavor from a prophetic Cryo Hop® blend of Sabro®, Mosaic®, and Citra® Tropical fruit, coconut, blueberry, mango, and bright citrus burst from every pour Estimated ABV: 8.5% Estimated IBUs: 90 Makes 2 gallons of finished beer The Hop Prophecy IPA Flash Brewing® Kit The Hop Prophecy delivers a revelation in hop intensity—an explosion of aroma and flavor from a prophetic blend of Sabro Cryo, Mosaic Cryo, and Citra Cryo hops. Tropical fruit, coconut, blueberry, mango, and bright citrus burst from every pour, balanced by a smooth malt backbone with subtle notes of honeyed biscuit and light caramel. A clean fermentation with Flash Yeast™ ensures the hops shine brightly while finishing crisp and dry. With massive hop character, bold strength, and a remarkably fast turnaround, the Hop Prophecy proves that great beer doesn’t need to take forever. Flash Brewing® Kits Designed for both novice and seasoned homebrewers, these innovative recipe kits allow you to simply mix the ingredients with water and add yeast for fermentation. Flash Brewing® offers a streamlined process that not only saves you valuable time but also simplifies brewing without sacrificing flavor. Say hello to a faster, easier way to craft exceptional beer at home. Typically, brewing requires you to boil your malt and hops for one hour, followed by another hour for cooling. Flash Brewing® eliminates the need to boil. Our Flash Brewing® malt recipes have been boiled and whirlpooled before they are dried. We then use a HopBite™ shot for bitterness combined with a mix of traditional hop pellets for flavor. Flash Yeast™ starts quickly and consistently produces clean beer that lets the malt and hops shine. The result is a high-quality beer that will absolutely surprise you. If you want to read more about the development of Flash Brewing® at MoreBeer! or have more questions please read our Frequently Asked Questions. Equipment Required for Flash Brewing® Flash Brews can be fermented in any wide mouth 6 or 7-gallon fermenter you already own. We suggest a wide mouth fermenter so you can easily pour in the ingredients. The 7-gallon Fermonster fermenter is a perfect choice. If you are new to brewing and need a fermentation kit, check out the Flash Brewing® Starter Kit for 2-gallon recipes. Includes: Hop Prophecy Flash Malt™: 3.8 lbs Sabro® Cryo Hops®: 0.5 oz Mosaic® Cryo Hops®: 0.5 oz Citra® Cryo Hops®: 0.5 oz HopBite™: 90 IBU Shot Flash Yeast™ Flash Brewing® Instructions Flash Brewing® recipe kits do not include priming sugar. For bottling, we recommend PopTops™ Swing Top Bottles and Pop Shots Carbonation Tablets. Sabro®, Mosaic®, and Citra® are registered trademarks owned by Hop Breeding Company. Cryo Hops® is a registered trademark owned by Yakima Chief Hops, LLC.

Read more less

Reliable in just about any style, including Pale Ales, IPAs, Wheats, Saisons, Ambers, and especially hop-forward Hazy IPAs or Hoppy Lagers Aroma Profile: Citrus, Grapefruit, Stone Fruit, Tropical, Woody Alpha Acids: 10.0 – 16.0% T-90 Hop Pellets This wildly popular dual purpose hop has been becoming more and more prevalent in the modern beer scene ever since it was originally released back in 2000 by Yakima Chief Ranches. Simcoe® is now a favorite among craft brewers and homebrewers alike for its versatility and delicious flavors of citrus, pine, and passion fruit character. High alpha acid content allows it to be used as the main bittering base, while its high oil content makes it an impressive aroma addition when added late in the boil, during whirlpool, or as dry hops during or after fermentation. Simcoe® has a smooth bitterness met with aromas of earth, citrus, and cannabis. Use liberally in just about any style, including Pale Ales, IPAs, Wheats, Saisons, Ambers, and especially hop-forward Hazy IPAs or Hoppy Lagers. Hop Statistics: Alpha Acids: 10.0 – 16.0% Beta Acids: 3.0 – 5.5% Cohumulone: (% of alpha acids): 17 – 21% Total Oils in mls per 100 grams dried: 0.5 – 3.0 Similar Hop Varieties: Summit, Magnum, Citra®, Mosaic®     Simcoe®, Citra®, and Mosaic® are registered trademarks owned by Yakima Chief Hops, LLC.

Read more less

Now available for pre-order! The next batch of BrewBuilt® V5 BrewSculptures will be released in late September. Place your pre-order now to lock in priority fulfillment as soon as the unit is available. Introducing the Next-Generation BrewBuilt BrewSculpture™ Professional-Grade Control: Manage your entire brew day from a single, intuitive digital touchscreen. Easily program mash steps and control pumps and heating elements with a tap, providing a centralized and seamless brewing experience. Full-Draining Kettles: The completely redesigned, true welded dish bottoms ensure you get every last drop of your wort. This revolutionary design eliminates the need for tilting and makes cleanup significantly easier. Innovative Mash Tun with Grain Door: Say goodbye to scooping heavy, spent grain. Our integrated grain door and stainless steel grain chute let you easily empty the mash tun into a disposal bucket, keeping your brew day clean and efficient. Tangential Boil Kettle: The integrated tangential whirlpool arm creates a powerful vortex, compacting hop and trub matter into a tight cone for a clear, sediment-free transfer to your fermenter. An integrated cooling jacket also helps rapidly chill your wort. Experience the pinnacle of home brewing with the new BrewBuilt BrewSculpture™. This all-in-one electric brewing system combines the trusted control and performance of our original designs with the latest innovations in brewing vessel technology, all managed through a unique digital touchscreen controller. The result? A pro-grade, all-electric sculpture engineered for efficiency, precision, and an unbelievably clean brew day, with the entire system controlled from one intuitive interface. At the Heart of the System: Full-Draining Kettles and Integrated Work Table We've completely redesigned our kettles to be the most drainable on the market. Featuring a true welded dish bottom, these kettles ensure you get every last drop of your precious wort. The revolutionary design means no more tilting, no more lost volume, and a far easier cleanup. Complementing this, a new integrated work table, sourced overseas, features a recessed top and drain, providing a dedicated and convenient space for all your brewing tasks. Mash Tun with Grain Door: Say goodbye to scooping heavy, water-logged grain. Our innovative mash tun features an integrated grain door, allowing you to simply open the chute and empty spent grains directly into a bucket or disposal bag. The included stainless steel grain chute ensures a clean and mess-free transfer. Boil Kettle with Tangential Arm and Cooling Jacket: Our new boil kettle is built for performance. The integrated tangential whirlpool arm creates a powerful vortex, compacting hop and trub matter into a tight cone at the center of the kettle, leaving you with a clear, sediment-free transfer to your fermenter. Additionally, the integrated cooling jacket allows for rapid chilling, bringing your wort down to pitching temperature faster than ever. Unmatched Power and Control with a Single Interface Powered by our proven control system, the new BrewSculpture puts you in command of your entire brew day through its unique digital touchscreen controller. The intuitive touchscreen interface allows you to program mash steps and control every pump and element with a tap of your finger, providing a seamless and centralized brewing experience. SlingBlade™ Heating Elements: Our unique crescent-shaped SlingBlade™ heating elements are engineered to promote a vigorous, rolling boil without scorching your wort. Their ultra-low watt density design transfers heat efficiently while staying out of the way of your whirlpool arm and other kettle accessories. Built for Life: Like all BrewBuilt products, this Brew Sculpture is built to last. The heavy-duty, TIG-welded 304 stainless steel frame is designed for a rock-solid, corrosion-resistant foundation for a lifetime of brewing. The new BrewBuilt BrewSculpture™ is more than just a brewing system—it's a professional-grade, all-electric brewery that fits in your home, controlled effortlessly from a single, advanced digital interface. It’s a testament to over two decades of R&D and a commitment to helping you brew your best beer.   Please Note: The BrewSculpture™ power box includes a 6 ft cord with an L6-30P plug (two for the 1BBL model); if your outlet is further than 6 ft away, we offer a compatible 10 ft extension cord. For your safety, DO NOT string multiple extension cords together, as the increased electrical resistance creates a significant fire hazard. Please ensure your setup reaches your power source using only a single extension.    

Read more less

Large disposable mesh bag that is great for microbreweries to contain hops, spices, oak, etc. Very stretchy, like a sock made out of cheesecloth. Large 48 inch x 48 inch size. Made from FDA approved nylon mesh

Read more less

The MTSs is a Heating System Upgrade designed for use with Ss Brewtech’s Infusion Mash Tun.  During extended Mash periods or in relatively cold ambient temperatures, the mash will naturally drop in temperature.  This system will counteract those temperature drops, and hold a consistent saccharification temperature, helping insure you are making the beer and flavor profiles you planned to produce. The MTSs is a low wattage silicone heater pad, which is bonded to the underside of the 5 degree sloped bottom on your Mash Tun using a strong adhesive backing on the heater pad.  The heater is controlled with a 12 volt digital temp controller.  You simply set your target temperature and the heater will cycle on and off to maintain your set point.  This system is NOT designed for heating water to strike temp and/or step mashing, though it can help with fine tuning your strike water temp those last few degrees and/or maintaining your strike water temp while you are preparing your grist or balancing your water chemistry.    

Read more less

Imparts notes of sweet watermelon candy, bright raspberry, and subtle pine Performs well in IPAs, Pale Ales, and other hop-forward beer styles Aroma Profile: Watermelon, Raspberry, Pine Alpha Acids: 12.6% T-90 Hop Pellets Anchovy Hops (formerly experimental variety 24B-05) are a recently developed hop from Segal Ranches in the Yakima Valley. This dual-purpose hop provides distinct aroma and flavor that include sweet watermelon candy, raspberry, and pine. With an average alpha acid content of around 12.6%, Anchovy Hops are suitable for bittering additions but are particularly effective when utilized for aroma and flavor contributions in later additions, whirlpool, or dry hopping. Recommended for use in IPAs, Pale Ales, and other hop-forward beer styles where a unique fruit and resin profile is desired. Hop Statistics Alpha Acids: 12.6% Beta Acids: 3.6% Alpha-Beta Ratio: 3.5 Total Oil: 1.61%

Read more less

Crystal Clear super smooth PET makes fermenting and cleaning super easy Pressurizable for fermentation and closed transfer to your keg Includes BlowTie spunding valve kit, red & yellow carbonation caps, and floating dip tube as standard The FermZilla 30L All Rounder is the perfect fermentation vessel that can be used for fermenting under pressure, carbonating, and dispensing.  It's far more capable than the FermZilla Flat Bottom but less complicated and less expensive than the FermZilla Tri-Conical fermenter. The key differences are that the All Rounder can be pressurized, unlike the Flat Bottom, but it does not have a dump valve like the FermZilla Tri-Conical. The FermZilla All Rounder Easy-Grip model comes packed with accessories so you can take full advantage of this pressurizable fermenter on day one. The new stock standard includes Easy-Grip threaded lid ring, BlowTie spunding valve with integrated pressure gauge, ball lock carbonation caps for the lid, and floating dip tube kit with weighted filter.  What's Included: FermZilla 30L All Rounder Fermenter Hex Base with 24 x Sticky Dots (pre-attached) Easy-Grip Threaded Lid Ring Integrated Gauge BlowTie Kit Spunding Valve (0-15 psi) Silicone Dip Tube Kit with Yellow Weighted Filter and SS Float Red & Yellow Carbonation Caps Adhesive Thermometer Graduation Sticker Specs: 30 L (7.9 gal) Total Volume Pressure Rated to 2.5 Bar (36.2 psi) Height in Stand - 23" Tank Diameter - 14"  Lid - 28 mm PCO 1881 threads Temperature Rating: When not under pressure, do not expose to liquids above 131°F When under pressure, do not expose to any temperatures above 95°F* *Please note that the temperature rating for the FermZilla tank is lower when using it under pressure. When not under pressure, it is perfectly safe to transfer wort into the tank below 131°F or to use hot liquids below this temp for cleaning. When under pressure, make sure to keep your fermentation temperature below 95°F and keep the fermenter in an environment that is below 95°F ambient. This is especially important when fermenting with kveik yeast. These strains are known to ferment hot if no temperature control is being used. Exceeding the temperature rating may compromise the tank, leading to a shorter life span or sudden failure to maintain pressure. Even with proper use, we recommend replacing the tank every two years. Kegland Part number: KL47272 NOTE: FermZilla tanks are marked with a manufacturer’s “expiry date”. This does not indicate that the tank is bad after this date; it simply indicates that a hydro test may be in order. 2 years after production and every 2 years after first use, it is recommended that the tank be hydro tested to ensure the tank is holding pressure. Hydro test instructions are available below. You will also need the D1072 Green PRV to perform the test. If you do not plan to pressurize the fermenter, the test is not necessary. FermZilla All Rounder 30L & 60L | User Guide

Read more less

A superlative Doppelbock recipe with high percentages of Munich malt Includes Northern Brewer and Mittelfruh hops Estimated ABV: 9.1% Estimated IBUs: 18-21 Makes 5 gallons of finished beer We are in general agreement in the shop, this is the recipe for the best Bock we have ever tasted. The secret to great Bock is to use high percentages of Munich malt, if decoction brewing is not an option. With over 17lbs of grain included, this recipe would normally overflow your standard mash tun. Due to this, we've included two pounds of extract to make it possible to reach the 1.090+ OG! Makes 5 gallons Estimated Original Gravity:1.091-94 SRM (Color Range): 16 IBUs: 18-21 Estimated Alcohol Percentage: 9.1%     Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”.  For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts.  

Read more less

Pro-Grade Construction: Made from high-quality 304 stainless steel with a welded dish bottom for complete drainage and easy cleaning. Sanitary Connections: Features sanitary welded TC ferrules for leak-free, professional-grade connections. Enhanced Usability: Includes silicone-gripped handles, a TC-ported lid for CIP, and raised legs for convenient access. Fully Customizable: The kettle arrives without fittings or valves, giving you a blank canvas to customize with your preferred accessories. Elevate your homebrewing craft with BrewBuilt Brewing Kettles – where professional-grade design meets the passionate homebrewer's desire for customization. Each kettle is meticulously crafted from high-quality 304 stainless steel, promising not just durability but a lifetime of flawless brews. Discover the revolutionary welded dish bottom, engineered for unparalleled complete drainage, ensuring every precious drop of wort is utilized and cleanup becomes a breeze. Our kettles feature high-quality sanitary welded TC Ferrules, providing a lifetime of leak-free use and making sanitary connections effortless, a standard in professional breweries now accessible for homebrewing. Comfort and safety are prioritized with silicone-gripped handles to protect your hands from heat. The lid comes welded with a TC port, ready for CIP (Clean-in-Place) and other future accessories. For convenient access to lower ports, the kettles are raised on sturdy legs. BrewBuilt Kettles are the same high-performance kettles used in our Next Generation BrewSculptures, guaranteeing professional-grade results. Available in a wide range of popular homebrew sizes—10, 15, 20, 30, and 50 gallons—they cater to every brewing scale. Build Your Own Brewing System: This BrewBuilt Kettle provides the perfect foundation for your custom brewing setup. It does not include accessories, giving you the freedom to purchase the specific hardware you need to build a dedicated Hot Liquor Tank (HLT), Mash Tun, or Boil Kettle. Major Features for Brewers: High-Quality 304 stainless steel construction Welded Dish Bottom for complete drainage - easy cleaning, no loss High-Quality sanitary welded TC Ferrules Handles with Silicone grips to avoid burning hands Lid comes welded with TC port for CIP and other accessories down the road Kettles are raised on legs for easy access to lower ports Same Kettles used in our Next Generation BrewSculptures Wide Range of homebrew sizes - 10, 15, 20, 30, 50 gal Please Note: This kettle is designed for customization. All necessary hardware, including heating elements, valves, thermowells, and clamps, must be purchased separately to build your desired brewing system. Please Note: This kettle is designed for customization. All necessary hardware—including heating elements, valves, thermowells, and clamps—must be purchased separately to build your desired brewing system.

Read more less

Circulation manifold for mashing and sparging. Fastened around the sparge pipe and can be adjusted to sit at the top of the grain bed. Included: Manifold Sparge adapter with 1/2" (12 mm) hose barb Silicone core Silicone tube 3/8" x 5/8", 3.2' (10mm x 16 mm, 1 meter) Tri Clamp, 34mm

Read more less

The Essential Kits are designed to get you up and brewing with one click.  It's highly recommended you add this to your cart with your purchase of a RIMS. Sight Glass | 2.25" Hose Barb | 1/2" to 1.5" TC (2) Clamp | 1.5" TC clamp (3) Gasket | 1.5" TC gasket (3) Tubing | ½” ID Silicone (5ft) Hose Clamps (2)

Read more less

A festive pumpkin beer recipe that is malt-forward with a mild hop finish and subtle flavor of pumpkin spice Includes Northern Brewer and Cascade hops Estimated ABV: 4.5% Estimated IBUs: 28-32 Makes 5 gallons of finished beer Our famous Thanksgiving Ale is based on an Amber Ale with modest bittering, a mild hop finish, and of course the subtle flavor of pumpkin spice. Not overpowering in the spice, it is a great beer to share with both experienced and novice beer lovers. Show up at Thanksgiving with a case of your own pumpkin spiced beer and your in-laws may just change their mind about you... normally you can't buy that kind of love. This recipe kit includes (2) 1 tsp packets of pumpkin spice. The recipe sheet only lists a single packet to be boiled in the last 5 minutes, but both packets should be added at this time. Makes 5 gallons Estimated Original Gravity: 1.045-50 SRM (Color Range): 14 IBUs: 28-32 Estimated Alcohol Percentage: 4.5% Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”.  For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts.      

Read more less

Blond German lager with a soft body, low to medium bitterness, and predominate malt flavor Includes Northern Brewer and Saaz hops Estimated ABV: 5% Estimated IBUs: 30-32 Makes 5 gallons of finished beer A big blond German Lager. Soft body with low to medium bitterness of about 32 IBU and predominate malt flavor. We make it at the upper limits of gravity, according to style guidelines, with 8 lbs of malt extract. The malt for this kit is made entirely from German Pilsner Malt, giving it that classic pilsner flavor. Makes 5 gallons Estimated Original Gravity:1.052-56 SRM (Color Range): 5-6 IBUs: 30-32 Estimated Alcohol Percentage: 5% Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”.  For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All included steeping grains will come milled.     Liquid Malt Extract (LME) vs. Dried Malt Extract (DME) MoreBeer! recipe kits are offered in both Liquid Malt Extract and Dry Malt Extract so that our customers can choose the format that best suits their needs and brewing style. LME is a viscous liquid, similar in consistency to maple syrup. In addition to being the more affordable option, many brewers find LME easier to handle than dry extract. DME is more condensed and comes in a powder format that is similar to baking flour. Although it’s a little more costly, DME is naturally lighter in color and stays fresher for longer. We highly recommend DME when brewing light colored beers.      

Read more less

This recipe makes a delicious golden sour that is enjoyable on its own or easily customized with your own fruiting  Includes a single addition of Centennial hops Estimated ABV: 5.3% Estimated IBUs: 7 Makes 5 gallons of finished beer Thick fog rolls over a dimly lit stage as the volume from an array of loudspeakers steadily rises. You feel the sonic waves emanating from the sound system pass through you, standing up the hair on the back of your neck. Just as the anticipation becomes too much to bear, the darkness is pierced by a spectrum of beam lights and the bass drops. Your eyes squeeze shut and you cover your ears in a trifling attempt to block out the deafening shrieks of 50,000 rabid fans. But it’s no use. Finally, you unclench your eyes and realize that you're not standing in a sea of concert-goers. And it's you that's cheering at the top of your lungs after taking your first sip of K-POP Kettle Sour. If you've never brewed a kettle sour before, this is the perfect introductory kit. The process requires some extra equipment and steps compared to a normal brew day, but it's worth it! The end result will be a refreshingly light and easy-drinking beer with a delightful tartness that finishes clean. Check out the recipe sheet below and review the instructions before purchasing, and make sure to add both a yeast pitch and a lactobacillus pitch to your order. This recipe makes a delicious golden sour that is enjoyable without further alteration, but we highly recommend adding dry hops or fruit to make it your own. You can purchase puree from the add-on options above or you can use your own fresh or frozen fruit. We recommend 1 lb of whole fruit per gallon or 1-2 packages of puree for a 5-gallon batch. Add your chosen fruit when fermentation is complete and allow 5 to 7 days of contact time before packaging. Makes 5 gallons Estimated Original Gravity: 1.048-53 SRM (Color Range): 3-4 IBUs: 7 Estimated Alcohol Percentage: 5.3% Recommended Equipment: pH meter Electric heating wrap CO2 tank Plastic wrap Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”.  For more info, click on the recommended yeast(s) in the “You Might Also Need” section below. All included steeping grains will come milled.    

Read more less